See lix-project/lix#496.
The core idea is to be able to do e.g.
nix-instantiate -A some-nonfree-thing --arg config.allowUnfree true
which is currently not possible since `config.allowUnfree` is
interpreted as attribute name with a dot in it.
In order to change that (probably), Jade suggested to find out if there
are any folks out there relying on this behavior.
For such a use-case, it may still be possible to accept strings, i.e.
`--arg '"config.allowUnfree"'.
Change-Id: I986c73619fbd87a95b55e2f0ac03feaed3de2d2d
Apparently forgejo has a more creative interpretation of \(\) than I was
hoping in their markdown parser and thought it was maths. I have no idea
then how you put a link in parens next to another square-bracket link,
but I am not going to worry about it.
There were several more typos, which I also fixed.
Fixes: lix-project/lix#517
Change-Id: I6b144c6881f92ca60ba72a304ce7a0bcb9c6659a
Remove the mutable state stuff that assumes that one file is being
written a time. It's true that we don't write multiple files
interleaved, but that mutable state is evil.
Change-Id: Ia1481da48255d901e4b09a9b783e7af44fae8cff
When generating shell completions, no logging output should be visible because
it would destroy the shell prompt. Originally this was attempted to be done by
simply disabling the progress bar (ca946860ce),
since the situation is particularly bad there (the screen clearing required for
the rendering ends up erasing the shell prompt). Due to overlooking the
implementation of this hack, it was accidentally undone during a later change
(0dd1d8ca1c).
Since even with the hack correctly in place, it is still possible to mess up
the prompt by logging output (for example warnings for disabled experimental
features, or messages generated by `builtins.trace`), simply send it to the bit
bucket where it belongs. This was already done for bash and zsh
(9d840758a8), and it seems that fish was simply
missed at that time. The last trace of the no-longer-working and obsolete hack
is deleted too.
Fixes: lix-project/lix#513
Change-Id: I59f1ebf90903034e2059298fa8d76bf970bc3315
- Rename the listener to not be called a "sink". If it were a "sink" it
would be eating bytes and conform with any of the Nix sink stuff
(maybe FileHandle should be a Sink itself! but that's a later CL's
problem). This is a parser listener.
- Move the RetrieveRegularNARSink thing into store-api.cc, which is its
only usage, and fix it to actually do what it is stated to do: crash
if its invariants are violated.
It's, of course, used to erm, unpack single-file NAR files, generated
via a horrible contraption of sources and sinks that looks like a
plumbing blueprint. Refactoring that is a future task.
- Add a description of the invariants of NARParseVisitor in preparation
of refactoring it.
Change-Id: Ifca1d74d2947204a1f66349772e54dad0743e944
while gcc 12 and older miscompile our generators, gcc 13 and older
outright crash on kj coroutines. (newer gcc versions may fix this)
Change-Id: I19f12c8c147239680eb0fa5a84ef5c7de38c9263
using a proper event loop basis we no longer have to worry about most of
the intricacies of poll(), or platform-dependent replacements for it. we
may even be able to use the event loop and its promise system for all of
our scheduling in the future. we don't do any real async processing yet,
this is just preparation to separate the first such change from the huge
api design difference with the async framework we chose (kj from capnp):
kj::Promise, unlike std::future, doesn't return exceptions unmangled. it
instead wraps any non-kj exception into a kj exception, erasing all type
information and preserving mostly the what() string in the process. this
makes sense in the capnp rpc use case where unrestricted exception types
can't be transferred, and since it moves error handling styles closer to
a world we'd actually like there's no harm in doing it only here for now
Change-Id: I20f888de74d525fb2db36ca30ebba4bcfe9cc838
we're using boost::outcome rather than leaf or stl types because stl
types are not available everywhere and leaf does not provide its own
storage for error values, relying on thread-locals and the stack. if
we want to use promises we won't have a stack and would have to wrap
everything into leaf-specific allocating wrappers, so outcome it is.
Change-Id: I35111a1f9ed517e7f12a839e2162b1ba6a993f8f
When the multi-line log format is enabled, the progress bar usually occupies
multiple lines on the screen. When stopping the progress bar, only the last
line was wiped, leaving all others visible on the screen. Erase all lines
belonging to the progress bar to prevent these leftovers.
Asking the user for input is theoretically affected by a similar issue, but
this is not observed in practice since the only place where the user is asked
(whether configuration options coming from flakes should be accepted) does not
actually have multiple lines on the progress bar. However, there is no real
reason to not fix this either, so let's do it anyway.
Change-Id: Iaa5a701874fca32e6f06d85912835d86b8fa7a16
The AcceptFlakeConfig type used was missing its JSON serialisation definition,
so it was incorrectly serialised as an integer, ending up that way for example
in the nix.conf manual page. Declare a proper serialisation.
Change-Id: If8ec210f9d4dd42fe480c4e97d0a4920eb66a01e
The JSON serialisation should be declared in the header so that all translation
units can see it when needed, even though it seems that it has not been used
anywhere else so far. Unfortunately, this means we cannot use the
NLOHMANN_JSON_SERIALIZE_ENUM convenience macro, since it uses a slightly
different signature, but the code is not too bad either.
Change-Id: I6e2851b250e0b53114d2fecb8011ff1ea9379d0f
This is the repl overlay from my dotfiles, which I think provides a
reasonable and ergonomic set of variables. We can iterate on this over
time, or (perhaps?) provide a sentinel value like `repl-overlays =
<DEFAULT>` to include a "suggested default" overlay like this one.
Change-Id: I8eba3934c50fbac8367111103e66c7375b8d134e
it just makes sense to have it too, rather than just the pass/fail
information we keep so far. once we turn goals into something more
promise-shaped it'll also help detangle the current data flow mess
Change-Id: I915cf04d177cad849ea7a5833215d795326f1946
it doesn't have a purpose except cache priming, which is largely
irrelevant by default (since another code path already runs this
exact query). our store implementations do not benefit that much
from this either, and the more bursty load may indeed harm them.
Change-Id: I1cc12f8c21cede42524317736d5987f1e43fc9c9
updating statistics *immediately* when any counter changes declutters
things somewhat and makes useful status reports less dependent on the
current worker main loop. using callbacks will make it easier to move
the worker loop into kj entirely, using only promises for scheduling.
Change-Id: I695dfa83111b1ec09b1a54cff268f3c1d7743ed6
there's no reason to go through the event loop in these cases. returning
ContinueImmediately here is just a very convoluted way of jumping to the
state we've just set after unwinding one frame of the stack, which never
matters in the cases changed here because there are no live RAII guards.
Change-Id: I7c00948c22e3caf35e934c1a14ffd2d40efc5547
this is not ideal, but it's better than having this stuck in the worker
loop itself. setting ex on all failing goals is not problematic because
only toplevel goals can ever be observable, all the others are ignored.
notably only derivation goals ever set `ex`, substitution goals do not.
Change-Id: I02e2164487b2955df053fef3c8e774d557aa638a
this doesn't serve a great purpose yet except to confine construction of
goals to the stack frame of Worker::run() and its child frames. we don't
need this yet (and the goal constructors remain fully visible), but in a
future change that fully removes the current worker loop we'll need some
way of knowing which goals are top-level goals without passing the goals
themselves around. once that's possible we can remove visible goals as a
concept and rely on build result futures and a scheduler built upon them
Change-Id: Ia73cdeffcfb9ba1ce9d69b702dc0bc637a4c4ce6
whether goal errors are reported via the `ex` member or just printed to
the log depends on whether the goal is a toplevel goal or a dependency.
if goals are aware of this themselves we can move error printing out of
the worker loop, and since a running worker can only be used by running
goals it's totally sufficient to keep a `Worker::running` flag for this
Change-Id: I6b5cbe6eccee1afa5fde80653c4b968554ddd16f
(but only if it is set to relaxed. no security hole here.)
Thanks to lilyball for pointing out this omission in the docs.
Change-Id: I2408a943bfe817fe660fe1c8fefef898aaf5f7e9
Apparently the fmt contraption has some extremely popular overloads, and
the boost stuff in there gets built approximately infinite times in
every compilation unit.
Change-Id: Ideba2db7d6bf8559e4d91974bab636f5ed106198
Fixes:
- Identifiers starting with _ are prohibited
- Some driveby header dependency cleaning which wound up with doing some
extra fixups.
- Fucking C style casts, man. C++ made these 1000% worse by letting you
also do memory corruption with them with references.
- Remove casts to Expr * where ExprBlackHole is an incomplete type by
introducing an explicitly-cast eBlackHoleAddr as Expr *.
- An incredibly illegal cast of the text bytes of the StorePath hash
into a size_t directly. You can't DO THAT.
Replaced with actually parsing the hash so we get 100% of the bits
being entropy, then memcpying the start of the hash. If this shows
up in a profile we should just make the hash parser faster with a
lookup table or something sensible like that.
- This horrendous bit of UB which I thankfully slapped a deprecation
warning on, built, and it didn't trigger anywhere so it was dead
code and I just deleted it. But holy crap you *cannot* do that.
inline void mkString(const Symbol & s)
{
mkString(((const std::string &) s).c_str());
}
- Some wrong lints. Lots of wrong macro lints, one wrong
suspicious-sizeof lint triggered by the template being instantiated
with only pointers, but the calculation being correct for both
pointers and not-pointers.
- Exceptions in destructors strike again. I tried to catch the
exceptions that might actually happen rather than all the exceptions
imaginable. We can let the runtime hard-kill it on other exceptions
imo.
Change-Id: I71761620846cba64d66ee7ca231b20c061e69710
It's nice for this to be a separate function and not just inline in
`absPath`.
Prepared as part of cl/1865, though I don't think I actually ended up
using it there.
Change-Id: I24d9d4a984cee0af587010baf04b3939a1c147ec
the current test relies on derivation build order being deterministic,
which will not be a reasonable expectation for all that long any more.
Change-Id: I9be44a7725185f614a9a4c724045b8b1e6962c03
this makes WorkResult copyable, and just all around easier to deal with.
in the future we'll need this to let Goal::work() return a promise for a
WorkResult (or even just a Finished) that can be awaited by other goals.
Change-Id: Ic5a1ce04c5a0f8e683bd00a2ed2b77a2e28989c1
this should be done where we're actually trying to build something, not
in the main worker loop that shouldn't have to be aware of such details
Change-Id: I07276740c0e2e5591a8ce4828a4bfc705396527e
This caused an absolute saga which I would not like anyone else to have
to experience. Let's put in a laser targeted error message that
diagnoses this exact problem.
Fixes: lix-project/lix#484
Change-Id: I2a79f04aeb4a1b67c10115e5e39501d958836298
This took parsing time from 1421s or so to 1060s or so. The reason is
entirely nlohmann. All of the stuff below is just Obliterated because it's
built in the PCH instead:
**** Templates that took longest to instantiate:
219051 ms: nlohmann::basic_json<>::parse<const char *> (276 times, avg 793 ms)
169675 ms: nlohmann::basic_json<>::basic_json (1127 times, avg 150 ms)
129416 ms: nlohmann::detail::parser<nlohmann::basic_json<>, nlohmann::detail::i... (276 times, avg 468 ms)
98155 ms: nlohmann::detail::parser<nlohmann::basic_json<>, nlohmann::detail::i... (276 times, avg 355 ms)
81322 ms: nlohmann::basic_json<>::json_value::json_value (1405 times, avg 57 ms)
53531 ms: nlohmann::detail::json_sax_dom_callback_parser<nlohmann::basic_json<... (276 times, avg 193 ms)
clang-only. This brings the clang build time to not far from *half* of
the gcc build time.
Also, clang does not enjoy so much to miscompile coroutines. Maybe we
should just be clang-only.
Change-Id: Id3135db0094e4560830674090e32e6da2c22fcc6
This avoids C++'s standard library regexes, which aren't the same
across platforms, and have many other issues, like using stack
so much that they stack overflow when processing a lot of data.
To avoid backwards and forward compatibility issues, regexes are
processed using a function converting libstdc++ regexes into Boost
regexes, escaping characters that Boost needs to have escaped, and
rejecting features that Boost has and libstdc++ doesn't.
Related context:
- Original failed attempt to use `boost::regex` in CppNix, failed due to
boost icu dependency being large (disabling ICU is no longer necessary
because linking ICU requires using a different header file,
`boost/regex/icu.hpp`): https://github.com/NixOS/nix/pull/3826
- An attempt to use PCRE, rejected due to providing less backwards
compatibility with `std::regex` than `boost::regex`:
https://github.com/NixOS/nix/pull/7336
- Second attempt to use `boost::regex`, failed due to `}` regex failing
to compile (dealt with by writing a wrapper that parses a regular
expression and escapes `}` characters):
https://github.com/NixOS/nix/pull/7762Closes#34. Closes#476.
Change-Id: Ieb0eb9e270a93e4c7eed412ba4f9f96cb00a5fa4
nixpkgs delivered us the untimely gift of a meson 1.5 upgrade, which
*does* make our lives easier by allowing us to delete wrap generation
code, but it does so at the cost of renaming all rust crates in such a
way that the wrap logic cannot tolerate the new names on the old meson
version 😭.
It also means that support burden for this is going to be atrocious
until we either give in and vendor meson 1.5 or we make a CI target for
it. Neither seems appealing, though the latter is not super absurd for
ensuring we don't break nixpkgs unstable.
This commit causes meson 1.5 to ignore the .wrap files in subprojects/
entirely (since they have the wrong names lol) and instead use
Cargo.lock, so it now hard-depends on our workspace reshuffling
improvement.
It also deletes the hack that we were using to get the sources of Cargo
deps into meson by using a feature that went unnoticed when this code
was originally written: MESON_PACKAGE_CACHE_DIR:
8a202de6ec/mesonbuild/wrap/wrap.py (L490-L502)
Change-Id: I7a28f12fc2812c6ed7537b60bc3025c141a05874
This is purely to let Cargo's dependency resolver do stuff for us, we do
not actually intend to build this stuff with Cargo to begin with.
Change-Id: I4c08d55595c7c27b7096375022581e1e34308a87
There have been multiple setting types for paths that are supposed to be
canonicalised, depending on whether zero or one, one, or any number of paths is
to be specified. Naturally, they behaved in slightly different ways in the
code. Simplify things by unifying them and removing special behaviour (mainly
the "multiple paths type can coerce to boolean" thing).
Change-Id: I7c1ce95e9c8e1829a866fb37d679e167811e9705
Commit 0dd1d8ca1c included an accidental revert
of 1461e6cdda (actually slightly worse), leading
to the progress bar not being stopped properly when a legacy command was
invoked with `--log-format bar` (or similar options that show a progress bar).
Move the progress bar stopping code to its proper place again to fix this
regression.
Change-Id: I676333da096d5990b717a387924bb988c9b73fab
lix-doc is now built with Meson, with lix-doc's dependencies built as
Meson subprojects, either fetched on demand with .wrap files, or fetched
in advance by Nix with importCargoLock. It even builds statically.
Fixes#256.
Co-authored-by: Lunaphied <lunaphied@lunaphied.me>
Co-authored-by: Jade Lovelace <lix@jade.fyi>
Change-Id: I3a4731ff13278e7117e0316bc0d7169e85f5eb0c
The <() process substitution syntax doesn't work for this one testcase
in bash for FreeBSD. The exact reason for this is unknown, possibly to
do with pipe vs file vs fifo EOF behavior. The prior behavior was this
test hanging forever, with no children of the bash process.
Change-Id: I71822a4b9dea6059b34300568256c5b7848109ac
Closes#460
I managed to trigger the issue by having the following inputs (shortened):
authentik-nix.url = "github:nix-community/authentik-nix";
authentik-nix.inputs.poetry2nix.inputs.nixpkgs.follows = "nixpkgs";
When evaluating this using
nix-eval-jobs --flake .#hydraJobs
I got the following error:
error: cannot update unlocked flake input 'authentik-nix/poetry2nix' in pure mode
The issue we have here is that `authentik-nix/poetry2nix` was written
into the `overrideMap` which caused Nix to assume it's a new input and
tried to refetch it (#460) or errored out in pure mode
(nix-eval-jobs / Hydra).
The testcase unfortunately only involves checking for the output log
and makes sure that something *is* logged on the first fetch so that
the test doesn't rot when the logging changes since I didn't
manage to trigger the error above with the reproducer from #460. In
fact, I only managed to trigger the `cannot update unlocked flake input`
error in this context with `nix-eval-jobs`.
Change-Id: Ifd00091eec9a0067ed4bb3e5765a15d027328807
this can be a proper WorkResult now. childTerminated is unfortunately a
lot more stubborn and won't be made private for quite a while yet. once
we can get rid of the Worker poll loop that *should* be possible though
Change-Id: I2218df202da5cb84e852f6a37e4c20367495b617
we'll need this once we want to pass extra information out of accepting
replies, such as fd sets or possibly even async output reader promises.
Change-Id: I5e2f18cdb80b0d2faf3067703cc18bd263329b3f
don't keep fds open we're not using. currently this does not cause any
problems, but it does increase the size of our fd table needlessly and
in the future, when we have proper async processing, having builderOut
open in the daemon once the hook has been fully started is problematic
Change-Id: I6e7fb773b280b042873103638d3e04272ca1e4fc
this is useless to do on the face of it, but it'll make it easier to
convert the entire output handling to use async io and promises soon
Change-Id: I2d1eb62c4bbf8f57bd558b9599c08710a389b1a8
only DerivationGoal can set the hook to anything at all. it always sets
buildOutFD to something that is not related to fromHook in any way, and
mixing the two would have rather dire consequences for log consistency.
Change-Id: Ida86727fd1cd5e1ecd78f07f3bde330a346658a8
This is incredibly haunted, but it can happen that you change libutil,
breaking the generation of the .json files, which then does not rebuild
the files. I don't expect they are slow to build, so it does not seem so
bad to just rebuild them every time instead of extracting a list of all
the possible deps.
We want to delete this nonsense anyway and replace it with generated
code.
Change-Id: Ia576d1a3bdee48fbaefbb5ac194354428d179a84
all derivation goals need a log fd of some description. let's save this
single fd in a dedicated pointer field for all subclasses so that later
we have just the one spot to change if we turn this into async promises
Change-Id: If223adf90909247363fb823d751cae34d25d0c0b
we don't need to expose information about how busy a Worker is if the
worker can instead tell its work items whether they are in a slot. in
the future we might use this to not start items waiting for a slot if
no slots are currently available, but that requires more preparation.
Change-Id: Ibe01ac536da7e6d6f80520164117c43e772f9bd9
They are like experimental features, but opt-in instead of opt-out. They
will allow us to gracefully remove language features. See #437
Change-Id: I9ca04cc48e6926750c4d622c2b229b25cc142c42
The target_machine variable is meant for the target
of cross compilers. We are not a cross compiler, so
instead reuse our host_machine based checks.
Fixes Linux→FreeBSD cross, since Meson can't figure
out `target_machine.kernel()` in that case.
Fixes: lix-project/lix#469
Change-Id: Ia46a64c8d507c3b08987a1de1eda171ff5e50df4
This merge commit returns to the previous state prior to the release but leaves the tag in the branch history.
Release created with releng/create_release.xsh
Change-Id: I8fc975f856631dec7fb3314abd436675adabb59c
For years both the documentation and nixpkgs have said that CppNix is
LGPL-2.1-or-later, not LGPL-2.1-only as is somewhat implied by the
README. We are choosing to update the README to match the rest of the
references.
Related: https://github.com/NixOS/nix/pull/5218
Change-Id: I6a765ae7857a2f84872f80a25983c4c4b2b3b1c1
Seems a little bit Rich that musl does not implement close_range because
they suspect that the system call itself is a bad idea, so they uhhhh
are considering not implementing a wrapper. Let's just fix the problem
at hand by writing our own wrapper.
Change-Id: I1f8e5858e4561d58a5450503d9c4585aded2b216
Turns out strings do not like being resized to -4.
This was discovered while messing with the tests to remove unbuffer and
trying stdbuf instead. Turns out that was not the right approach.
This basically rewrites the handling of this case to be much more
correct, and fixes a bug where with small window sizes where it would
ALSO truncate the attr names in addition to the optional descriptions.
Change-Id: Ifd1beeaffdb47cbb5f4a462b183fcb6c0ff6c524
I was packaging Lix 2.91 for nixpkgs and was annoyed at the expect
dependency. Turns out that you can replace unbuffer with a pretty-short
Python script.
It became less short after I found out that Linux was converting \n to
\r\n in the terminal subsystem, which was not very funny, but is at
least solved by twiddling termios bits.
Change-Id: I8a2700abcbbf6a9902e01b05b40fa9340c0ab90c
This will stop printing stuff to dumb terminals that they don't support.
I've overall audited usage of isatty and replaced the ones with intent
to mean "is a Real terminal" with checking for that. I've also caught a
case of carelessly assuming "is a tty" means "should be colour" in
nix-env.
Change-Id: I6d83725d9a2d932ac94ff2294f92c0a1100d23c9
I noticed there was some stuff setting configureFlags that definitely do
not do anything with meson, so let's rip them out.
As for the empty file, it was added when I was thinking I needed a fake
C++ target to convince meson to create the necessary dependencies. That
was not in fact possible so it should have never been committed.
Change-Id: Ied4723d8a5d21aed85f352c48b080ab2c977a496
We're going for Dragon's Breath because horrors called dibs on it.
It's fine to merge this a little before the final release, since all the
dev versions have -pre in them anyway.
Change-Id: I763acb2fc1bf76030f7feaed983addf6ae2fdd53
this is only used to close non-stdio files in derivation sandboxes. we
may as well encode that in its name, drop the unnecessary integer set,
and use close_range to deal with the actual closing of files. not only
is this clearer, it also makes sandbox setup on linux fast by 1ms each
Change-Id: Id90e259a49c7bc896189e76bfbbf6ef2c0bcd3b2
implementing a build hook is pretty much impossible without either being
a nix, or blindly forwarding the important bits of all build requests to
some kind of nix. we've found no uses of build-hook in the wild, and the
build-hook protocol (apart from being entirely undocumented) is not able
to convey any kind of versioning information between hook and daemon. if
we want to upgrade this infrastructure (which we do), this must not stay
Change-Id: I1ec4976a35adf8105b8ca9240b7984f8b91e147e
this is a bit of a hack, but it's apparently the cleanest way of doing
this in the absence of any kind of priority/provenance information for
values of some given setting. we'll need this to deprecate build-hook.
Change-Id: I03644a9c3f17681c052ecdc610b4f1301266ab9e
sure, linux has been providing argv[0] by default for a while now. other
OSes may not be as forthcoming though, and relying on the OS to create a
world in which we can just make assumptions we could test for instead is
unnecessarily lazy. we *could* default argv0, but that's a little silly.
notably we abort instead of returning normally to avoid confusions where
a caller interprets our exit status like a Worker build results bitmask.
Change-Id: Id73f8cd0a630293b789c59a8c4b0c4a2b936b505
* changes:
sqlite: add a Use::fromStrNullable
util: implement charptr_cast
tree-wide: fix a pile of lints
refactor: make HashType and Base enum classes for type safety
build: integrate clang-tidy into CI
This lets us ensure that nobody is putting in new reinterpret_cast
instances where they could safely use charptr_cast instead.
Change-Id: I6358a3934c8133c7150042635843bdbb6b9218d4
There were several usages of the raw sqlite primitives along with C
style casts, seemingly because nobody thought to use an optional for
getting a string or NULL.
Let's fix this API given we already *have* a wrapper.
Change-Id: I526cceedc2e356209d8fb62e11b3572282c314e8
I don't like having so many reinterpret_cast statements that have to
actually be looked at to determine if they are UB. A huge number of the
reinterpret_cast instances in Lix are actually casting to some pointer
of some character type, which is always valid no matter the source type.
However, it is also worth looking at if it is not casting both *from* a
character type and also *to* a character type, since IMO splatting a
struct into a character array should be a very deliberate action instead
of just being about dealing with bad APIs.
So let's write a template that encapsulates this invariant so we can
not worry about the trivially safe reinterpret_cast invocations.
Change-Id: Ia4e2f1fa0c567123a96604ddadb3bdd7449660a4
This:
- Converts a bunch of C style casts into C++ casts.
- Removes some very silly pointer subtraction code (which is no more or
less busted on i686 than it began)
- Fixes some "technically UB" that never had to be UB in the first
place.
- Makes finally follow the noexcept status of the inner function. Maybe
in the future we should ban the function from not being noexcept, but
that is not today.
- Makes various locally-used exceptions inherit from std::exception.
Change-Id: I22e66972602604989b5e494fd940b93e0e6e9297
This still has utterly unacceptably bad output format design that I
would not inflict on anyone I like, but it *does* now exist, and you
*can* find the errors in the log.
Future work would obviously be to fix that and integrate the actual
errors into Gerrit using codechecker or so.
Followup issue: lix-project/lix#457
Fixes: lix-project/lix#147
Change-Id: Ifca22e443d357762125f4ad6bc4f568af3a26c62
The |> operator is a reverse function operator with low binding strength
to replace lib.pipe. Implements RFC 148, see the RFC text for more
details. Closes#438.
Change-Id: I21df66e8014e0d4dd9753dd038560a2b0b7fd805
This is not a proper fix for the confusion that can happen about how the
tags are supposed to be used.
For a proper fix, we need to do
lix-project/lix#439 and implement
worktrees such that the user never sees the git state anymore.
Change-Id: I7b543967f522cede486e42684b48cad47da95429
This was broken because Nix language's version comparison does not know
how to deal with versions like -rc1 and considers them newer, which is
in this case not desirable.
That in turn led to not tagging 2.90.0 docker images as "latest" since
the heuristic was wrong.
This commit also adds some more cross-checking and failsafes in case the
person running releng does not have a local main branch that is up to
date.
Fixes: lix-project/lix#443
Change-Id: I537103ebab58ae978c00e06972abe14432dd9c80
Currently, the parser relies on the global experimental feature flags.
In order to properly test conditional language features, we instead need
to pass it around in the parser::State.
This means that the parser cannot cache the result of isEnabled anymore,
which wouldn't necessarily hurt performance if the function didn't
perform a linear search on the list of enabled features on every single
call. While we could simply evaluate once at the start of parsing and
cache the result in the parser state, the more sustainable solution
would be to fix `isEnabled` such that all callers may profit from the
performance improvement.
Change-Id: Ic9b9c5d882b6270e1114988b63e6064d36c25cf2
This adds a second form to the `:log` command: it now can accept a
derivation path in addition to a derivation expression. As derivation
store paths start with `/nix/store`, this is not ambiguous.
Resolves: lix-project/lix#51
Change-Id: Iebc7b011537e7012fae8faed4024ea1b8fdc81c3
I definitely don't think we were using this, and it is probably an
omission in the original autoconf deletion more than anything.
Change-Id: Ib7c8082685e550575bca5af06f0e93adf982bd7c
I don't know why but I was getting a spurious -Werror=switch-enum inside
toml11. It does not make sense why it did not occur before, but it
should be stopped.
This was not done at an earlier stage to better match the legacy make
build system, but we don't use it anyway.
Change-Id: I636f8a71e8a0ba5e0feb80b435ae24c3af995c5d
This has been causing various seemingly spurious CI failures as well as
some failures on people running tests on beta builds.
lix> ++(nix-collect-garbage-dry-run.sh:20) nix-store --gc --print-dead
lix> ++(nix-collect-garbage-dry-run.sh:20) wc -l
lix> finding garbage collector roots...
lix> error: Listing pid 87261 file descriptors: Undefined error: 0
There is no real way to write a proper test for this, other than to
start a process like the following:
int main(void) {
for (int i = 0; i < 1000; ++i) {
close(i);
}
sleep(10000);
}
and then let Lix's gc look at it.
I have a relatively high confidence this *will* fix the problem since I
have manually confirmed the behaviour of the libproc call is
as-unexpected, and it would perfectly explain the observed symptom.
Fixes: lix-project/lix#446
Change-Id: I67669b98377af17895644b3bafdf42fc33abd076
* changes:
tree-wide: fix various lint warnings
flake & doxygen: update tagline
nix flake metadata: print modified dates for input flakes
cli: eat terminal codes from stdout also
Implement forcing CLI colour on, and document it better
manual: fix a syntax error in redirects.js that made it not do anything
misc docs/meson tidying
build: implement clang-tidy using our plugin
The growth of the seccomp filter in 127ee1a101
made its compilation time significant (roughly 10 milliseconds have been
measured on one machine). For this reason, it is now precompiled and cached in
the parent process so that this overhead is not hit for every single build. It
is still not optimal when going through the daemon, because compilation still
happens once per client, but it's better than before and doing it only once for
the entire daemon requires excessive crimes with the current architecture.
Fixes: lix-project/lix#461
Change-Id: I2277eaaf6bab9bd74bbbfd9861e52392a54b61a3
This is a preparation for precompiling the filter, which is done separately.
The behaviour should be unchanged for now.
Change-Id: I899aa7242962615949208597aca88913feba1cb8
The seccomp setup code was a huge chunk of conditionally compiled
platform-specific code. For this reason, it is appropriate to move it to the
platform-specific implementation file. Ideally its setup could be moved a bit
to make it happen at the same place as the Darwin restrictions, but that change
is going to be less mechanical.
Change-Id: I496aa3c4fabf34656aba1e32b0089044ab5b99f8
When MANPATH is unset or contains an empty component, a reasonable default is
used. Previously (after 3dced96741), when MANPATH
was unset, the shell hook would only place a location containing the Lix manual
pages there, and system-wide manual pages would become unavailable in the
development shell, which is undesired. Fix the issue by including an empty
component in this case.
Change-Id: Ib3c67a831d709fe2a87520e15917eebb59397bd1
This was always in the lock file and we can simply actually print it.
The test for this is a little bit silly but it should correctly
control for my daring to exercise timezone code *and* locale code in a
test, which I strongly suspect nobody dared do before.
Sample (abridged):
```
Path: /nix/store/gaxb42z68bcr8lch467shvmnhjjzgd8b-source
Last modified: 1970-01-01 00:16:40
Inputs:
├───flake-compat: github:edolstra/flake-compat/0f9255e01c2351cc7d116c072cb317785dd33b33
│ Last modified: 2023-10-04 13:37:54
├───flake-utils: github:numtide/flake-utils/b1d9ab70662946ef0850d488da1c9019f3a9752a
│ Last modified: 2024-03-11 08:33:50
│ └───systems: github:nix-systems/default/da67096a3b9bf56a91d16901293e51ba5b49a27e
│ Last modified: 2023-04-09 08:27:08
```
Change-Id: I355f82cb4b633974295375ebad646fb6e2107f9b
This *should* be sound, plus or minus the amount that the terminal code
eating code is messed up already.
This is useful for testing CLI output because it will strip the escapes
enough to just shove the expected output in a file.
Change-Id: I8a9b58fafb918466ac76e9ab585fc32fb9294819
The docs page has an incorrect escape that leads to a backslash
appearing in output. Meson stuff is self-explanatory, just shortens and
simplifies a bit.
Change-Id: Ib63adf934efd3caeb82ca82988f230e8858a79f9
The principle of this is that you can either externally build it with
Nix (actual implementation will be in a future commit), or it can be
built with meson if the Nix one is not passed in.
The idea I have is that dev shells don't receive the one from Nix to
avoid having to build it, but CI can use the one from Nix and save some
gratuitous rebuilds.
The design of this is that you can run `ninja -C build clang-tidy` and
it will simply correctly clang-tidy the codebase in spite of PCH
bullshit caused by the cc-wrapper.
This is a truly horrendous number of hacks in a ball, caused by bugs in
several pieces of software, and I am not even getting started.
I don't consider this to fix the clang-tidy issue filing, since we still
have a fair number of issues to fix even on the existing minimal
configuration, and I have not yet implemented it in CI. Realistically we
will need to do something like https://github.com/Ericsson/codechecker
to be able to silence warnings without physically touching the code, or
at least *diff* reports between versions.
Also, the run-clang-tidy output design is rather atrocious and must
not be inflicted upon anyone I have respect for, since it buries the
diagnostics in a pile of invocation logs. We would do really well to
integrate with the Gerrit SARIF stuff so we can dump the reports on
people in a user-friendly manner.
Related: lix-project/lix#147
Change-Id: Ifefe533f3b56874795de231667046b2da6ff2461
Expose an option for disabling the BDW-GC build dependency entirely. Fix the
place where one of its headers was included (unnecessarily) without proper
guarding. Finally, use this machinery to exclude BDW-GC from the ASAN builds
entirely (its usage has already been disabled due to compatibility issues
anyway), to ensure this configuration is not regressed again.
Change-Id: I2ebe8094abf67e7d1e99eed971de3e99d071c10b
this begins a long and arduous journey to remove all result state from
Goal, to eventually drop the std::enable_shared_from_this base, and to
completely eliminate all unsynchronized modification of states of both
Goal and Worker. by the end of this we will hopefully be able to start
and reap multiple derivation builds in parallel, which should speed up
the process quite a bit (at least for short local builds, others might
not notice a large difference. the build hooks will remain a problem.)
Change-Id: I57dcd9b2cab4636ed4aa24cdec67124fef883345
In the SSH code, the logger was conditionally paused, but unconditionally
resumed. This was fine as long as resuming the logger was idempotent. Starting
with 0dd1d8ca1c, it isn't any more, and the
behaviour of the code in question was missed. Consequently, an assertion
failure is triggered for example when performing builds against an "SSH" store
on localhost. Fix the issue by only resuming the logger when it has actually
been paused.
Fixes: lix-project/lix#458
Change-Id: Ib1e4d047744a129f15730b7216f9c9368c2f4211
we still mutate goal state to store the results of any given goal run,
but now we also have that information in Worker and could in theory do
something else with it. we could return a map of goal to goal results,
which would also let us better diagnose failures of subgoals (at all).
Change-Id: I1df956bbd9fa8cc9485fb6df32918d68dda3ff48
this is the first step towards removing all result-related mutation of
Goal state from goal implementations themselves, and into Worker state
instead. once that is done we can treat all non-const Goal fields like
private state of the goal itself, and make threading of goals possible
Change-Id: I69ff7d02a6fd91a65887c6640bfc4f5fb785b45c
once goals run on multiple threads these fields must by synchronized as
one, or we try to run build hooks to often (or worse, not often enough)
Change-Id: I47860e46fe5c6db41755b2a3a1d9dbb5701c4ca4
this will usually be used either directly (which is always fine) or in
Finally blocks (where it must never throw execptions). make sure that,
exceptions being handled or not, the calling wait() in Finally doesn't
cause crashes due to the Finally no-nested-exceptions-thrown assertion
Change-Id: Ib83a5d9483b1fe83b9a957dcefeefce5d088f06d
The original attempt at this introduced a regression; this commit
reverts the revert and fixes the regression.
This reverts commit 3e151d4d77.
Fix to the regression:
flakeref: fix handling of `?dir=` param for flakes in subdirs
As reported in #419[1], accessing a flake in a subdir of a Git
repository fails with the previous commit[2] applied with the error
error: unsupported Git input attribute 'dir'
The problem is that the `dir`-param is inserted into the parsed URL if a
flake is fetched from the subdir of a Git repository. However, for the
fetching part this isn't even needed. The fix is to just pass `subdir`
as second argument to `FlakeRef` (which needs a `basedir` that can be
empty) and leave the parsedURL as-is.
Added a regression test to make sure we don't run into this again.
[1] lix-project/lix#419
[2] e22172aaf6b6a366cecd3c025590e68fa2b91bcc,
originally 3e151d4d77
Change-Id: I2c72d5a32e406a7ca308e271730bd0af01c5d18b
I have added an option to turn off this build input because I'm much
more comfortable when I don't have that type of thing on my computer.
Its default value is true in order to avoid impacting anyone who depends
on AWS features.
Change-Id: Ic57f3c9b9468f422e9fbdcf3ba0fe96177631067
* changes:
remove unused headers in installable-attr-path
libexpr: include the type of the non-derivation value in the type error
libexpr: mild cleanup to getDerivations
libexpr: DrvInfo: remove unused bad-citizen constructor
cleanup and slightly refactor DrvInfo::queryOutputs
I was reminded by various evil things puck did to the evaluator
involving null bytes that you can get funny bytes by abusing JSON
parsing. It's neater than putting binary in the source file, so let's do
it.
Change-Id: I1ff2e0d829eb303fbed81fa2ebb3a39412e89ff1
* changes:
releng: move officialRelease to version.json
Add -Werror CI job
ci: add a asan+ubsan test run on x86_64-linux
tree-wide: add support for asan!
Shuffled the logic around a bit so the shorter code paths are early
returns, added comments, etc.
Should be NFC.
Change-Id: Ie3ddb3d0eddd614d6f8c37bf9a4d5a50282084ea
DrvInfo's constructor that only takes `EvalState` leaves everything else
empty; a DrvInfo which has no iota of information about the derivation
it represents is not useful, and was not used anywhere.
Change-Id: Ic4d93a08cb2748b8cef9a61e41e70404834b23f9
This was causing a few bits of suffering downstream, in particular, in
the NixOS module, which, after this change, can have the
`officialRelease` stuff in *it* completely deleted since we now have
correct defaulting in package.nix for it.
It also eliminates some automated editing of Nix files, which is
certainly always welcome to eliminate.
Fixes: lix-project/lix#406
Change-Id: Id12f3018cff4633e379dbfcbe26b7bc84922bdaf
We should cause CLs that introduce compiler warnings to fail CI. Sadly
this will only cover Clang, but it will cover Clang for free, so it's
truly impossible to say if it's bad or not.
Change-Id: I45ca20d77251af9671d5cbe0d29cb08c5f1d03c2
This should at least catch out blatantly bad patches that don't pass the
test suite with ASan. We don't do this to the integration tests since
they run on relatively limited-memory VMs and so it may not be super
safe to run an evaluator with leak driven garbage collection for them.
Fixes: lix-project/lix#403
Fixes: lix-project/lix#319
Change-Id: I5267b02626866fd33e8b4d8794344531af679f78
What if you could find memory bugs in Lix without really trying very
hard? I've had variously scuffed patches to do this, but this is
blocked on boost coroutines removal at this point tbh.
Change-Id: Id762af076aa06ad51e77a6c17ed10275929ed578
there are no other uses for this yet, but asking for just a subset of
outputs does seem at least somewhat useful to have as a generic thing
Change-Id: I30ff5055a666c351b1b086b8d05b9d7c9fb1c77a
If `:edit`ing a store path, don't reload repl afterwards
to avoid losing local variables: store is immutable,
so "editing" a store path is always just viewing it.
Resolves: lix-project/lix#341
Change-Id: I3747f75ce26e0595e953069c39ddc3ee80699718
limiting CA substitutions was a rather recent addition, and it used a
dedicated counter to not interfere with regular substitutions. though
this works fine it somewhat contradicts the documentation; job limits
should apply to all kinds of substitutions, or be one limit for each.
Change-Id: I1505105b14260ecc1784039b2cc4b7afcf9115c8
all goals do this. it makes no sense to not notify a goal of EOF
conditions because this is the universal signal for "child done"
Change-Id: Ic3980de312547e616739c57c6248a8e81308b5ee
just update progress every time a goal has returned from work(). there
seem to be no performance penalties, and the code is much simpler now.
Change-Id: I288ee568b764ee61f40a498d986afda49987cb50
bindPath/doBind is a useful function in build that is used in several
parts of LocalDerivationGoal. Moving this function makes it easier to
split LocalDerivationGoal implementation between several files.
Change-Id: Ic5a0768479c153c1aa3ed425f12604b20bbf0f42
Unfortunately, io_uring is totally opaque to seccomp, and while currently there
are no dangerous operations implemented, there is no guarantee that it remains
this way. This means that io_uring should be blocked entirely to ensure that
the sandbox is future-proof. This has not been observed to cause issues in
practice.
Change-Id: I45d3895f95abe1bc103a63969f444c334dbbf50d
Previously, system call filtering (to prevent builders from storing files with
setuid/setgid permission bits or extended attributes) was performed using a
blocklist. While this looks simple at first, it actually carries significant
security and maintainability risks: after all, the kernel may add new syscalls
to achieve the same functionality one is trying to block, and it can even be
hard to actually add the syscall to the blocklist when building against a C
library that doesn't know about it yet. For a recent demonstration of this
happening in practice to Nix, see the introduction of fchmodat2 [0] [1].
The allowlist approach does not share the same drawback. While it does require
a rather large list of harmless syscalls to be maintained in the codebase,
failing to update this list (and roll out the update to all users) in time has
rather benign effects; at worst, very recent programs that already rely on new
syscalls will fail with an error the same way they would on a slightly older
kernel that doesn't support them yet. Most importantly, no unintended new ways
of performing dangerous operations will be silently allowed.
Another possible drawback is reduced system call performance due to the larger
filter created by the allowlist requiring more computation [2]. However, this
issue has not convincingly been demonstrated yet in practice, for example in
systemd or various browsers. To the contrary, it has been measured that the the
actual filter constructed here has approximately the same overhead as a very
simple filter blocking only one system call.
This commit tries to keep the behavior as close to unchanged as possible. The
system call list is in line with libseccomp 2.5.5 and glibc 2.39, which are the
latest versions at the point of writing. Since libseccomp 2.5.5 is already a
requirement and the distributions shipping this together with older versions of
glibc are mostly not a thing any more, this should not lead to more build
failures any more.
[0] https://github.com/NixOS/nixpkgs/issues/300635
[1] https://github.com/NixOS/nix/issues/10424
[2] https://github.com/flatpak/flatpak/pull/4462#issuecomment-1061690607
Change-Id: I541be3ea9b249bcceddfed6a5a13ac10b11e16ad
In f047e4357b, I missed the behavior that if
building without a dedicated build user (i.e. in single-user setups), seccomp
setup failures are silently ignored. This was introduced without explanation 7
years ago (ff6becafa8). Hopefully the only
use-case nowadays is causing spurious test suite successes when messing up the
seccomp filter during development. Let's try removing it.
Change-Id: Ibe51416d9c7a6dd635c2282990224861adf1ceab
getSelfExe is used in a few places re-execute nix.
Current code in this file uses ifdefs to support several
platforms, just keep doing that
Change-Id: Iecc2ada0101aea0c30524e3a1218594f919d74bf
This was done originally because std::smatch does not accept `const char
*` as iterators. However, this was because we should have been using
std::cmatch instead.
Change-Id: Ibe73851fd39755e883df2d33d22fed72ac0a04ae
Nobody has stepped up to add further support for Hurd since this code
appeared in 2010 or 2014. We don't need it.
Change-Id: I400b2031a225551ea3c71a3ef3ea9fdb599dfba3
Use libprocstat to find garbage collector roots on FreeBSD.
Tested working on a FreeBSD machine, although there is no CI yet
Change-Id: Id36bac8c3de6cc4de94e2d76e9663dd4b76068a9
(cherry picked from commit 8cd1d02f90eb9915e640c5d370d919fad9833c65)
nix flake show: Only print up to the first new line if it exists.
(cherry picked from commit 5281a44927bdb51bfe6e5de12262d815c98f6fe7)
add tests
(cherry picked from commit 74ae0fbdc70a5079a527fe143c4832d1357011f7)
Handle long strings, embedded new lines and empty descriptions
(cherry picked from commit 2ca7b3afdbbd983173a17fa0a822cf7623601367)
Account for total length of 80
(cherry picked from commit 1cc808c18cbaaf26aaae42bb1d7f7223f25dd364)
docs: add nix flake show description release note
fix: remove white space
nix flake show: trim length based on terminal size
test: account for terminal size
docs(flake-description): before and after commands; add myself to credits
Upstream-PR: https://github.com/NixOS/nix/pull/10980
Change-Id: Ie1c667dc816b3dd81e65a1f5395e57ea48ee0362
Error is pretty large, and most goals do not fail. this alone more than
halves the size of Goal on x86_64-linux, from 720 bytes down to 344. in
derived classes the difference is not as dramatic, but even the largest
derived class (`LocalDerivationGoal`) loses almost 20% of its footprint
Change-Id: Ifda8f94c81b6566eeb3e52d55d9796ec40c7bce8
the goals are either already using std::async and merely forgot to
remove std::thread vestiges or they emulate async with threads and
promises. we can simply use async directly everywhere for clarity.
Change-Id: I3f05098310a25984f10fff1e68c573329002b500
under owner_less it's equivalent to insert(), only sometimes a little
bit faster because it does not construct a weak_ptr if the goal is in
the set already. this small difference in performance does not matter
here and c++23 will make insert transparent anyway, so we can drop it
Change-Id: I7cbd7d6e0daa95d67145ec58183162f6c4743b15
*accidentally* overriding a function is almost guaranteed to be an
error. overriding a function without labeling it as such is merely
bad style, but bad style that makes the code harder to understand.
Change-Id: Ic0594f3d1604ab6b3c1a75cb5facc246effe45f0
Commit 0109368c3f missed to include a required
header, which is not noticed when the precompiled header is enabled because
it's included in that. Also include it in the file so that the build without
precompiled header works too.
Change-Id: Id7a7979684b64f937f7f8191612952d73c113015
Due to a leftover from a previous version where the buffer was allocated on the
stack, the change introduced in commit 4ec87742a1
accidentally passes the size of a pointer as the size of the buffer to the
decompressor. Since the former is much smaller (usually 8 bytes instead of 64
kilobytes), this is safe, but leads to considerable overhead; most notably, due
to excessive progress reports, which happen for each chunk. Pass the proper
buffer size instead.
Change-Id: If4bf472d33e21587acb5235a2d99e3cb10914633
This commit adds a new helper template function to gc-alloc.hh (which is
probably where you want to look at first, O great reviewer [custom file
ordering in review diffs when]), which uses a type argument to determine
the size to allocate, rather than making the caller use sizeof().
Change-Id: Ib5d138d91a28bdda304a80db24ea9fb08669ad22
The purpose of this function has little to do with immutability. Value's
strings are never mutated, and the point of this function is to
singleton empty strings.
Change-Id: Ifd41dd952409d54e4d3de9ab59064e6928b0e480
SimpleLogger is not fully thread-safe, and all loggers that wrap it are
also not safe accordingly. this does not affect much, but in rare cases
it can cause interleaving of messages on stderr when used with the json
or raw log formats. the fix applied here is a bit of a hack, but fixing
this properly requires rearchitecting the logger infrastructure. nested
loggers are not the most natural abstraction here, and it is biting us.
Change-Id: Ifbf34fe1e85c60e73b59faee50e7411c7b5e7c12
it's only used once, and even that one use is highly questionable. more
instances of warnOnce should be much more principled than this has been
Change-Id: I5856570c99cb44462e700d753d0c706a5db03c4b
If useChroot = false, and user namespaces aren't available for some
reason (e.g. within a Docker container), this fixes a pointless warning
being emitted, as we would never attempt to use them even if they were
available.
Change-Id: Ibcee91c088edd2cd19e70218d5a5802bff8f537b
This removes a *whole load* of variables from scope and enforces thread
boundaries with the type system.
There is not much change of significance in here, so the things to watch
out for while reviewing it are primarily that the destructor ordering
may have changed inadvertently, I think.
Change-Id: I3cd87e6d5a08dfcf368637407251db22a8906316
* changes:
Fixup a bunch of references to nixos.org manuals
Add release notes for removing overflow from Nix language
expr: fix a compiler warning about different signs in comparison
* changes:
doc/release-notes: add for pretty printing improvements
libexpr/print: do not show elided nested items when there are none
libexpr/print: never show empty attrsets or derivations as «repeated»
libexpr/print: pretty-print idempotently
* changes:
docs: document the actual comparison rules instead of lies
daemon: remove workaround for macOS kernel bug that seems fixed
daemon: fix a crash bug "FATAL: exception not rethrown"
When the configured maximum depth has been reached, attribute sets and lists
are printed with ellipsis to indicate the elision of nested items. Previously,
this happened even in case the structure being printed is empty, so that such
items do not in fact exist. This is confusing, so stop doing it.
Change-Id: I0016970dad3e42625e085dc896e6f476b21226c9
The repeated value detection logic exists so that the occurrence of large
common substructures does not fill up the screen or the computer's memory.
However, empty attribute sets and derivations (when their detection is enabled)
are always cheap to print, and in practice I have observed them to make up a
significant majority of the cases where I was annoyed by the repeated value
detection kicking in. Furthermore, `nix-instantiate --eval` already disables
this logic for empty attribute sets, and empty lists are already exempted
everywhere. For these reasons, always print empty attribute sets and
derivations as what they are.
Change-Id: I5dac8e7739f9d726b76fd0521ec46f38af94463f
When pretty-printing is enabled, previously an unforced thunk would trigger
indentation, even when it subsequently does not evaluate to a nested structure.
The resulting output looked inconsistent, and furthermore pretty-printing was
not idempotent (since pretty-printing the same value again, which is now fully
evaluated, will not trigger indentation).
When strict evaluation is enabled, force the item before inspecting its type,
so that it is properly known whether it contains a nested structure.
Furthermore, there is no need to cause indentation for unforced thunks, since
the very next operation will be printing them as `«thunk»`.
This is mostly a port of https://github.com/NixOS/nix/pull/11100 , but we only
force the item when it's going to be forced anyway due to strict
pretty-printing, and a new test was written since the REPL testing framework in
Lix is different.
Co-Authored-By: Robert Hensing <robert@roberthensing.nl>
Change-Id: Ib7560fe531d09e05ca6b2037a523fe21a26d9d58
The insertion marker comment broke the list into two parts, the first
containing only the link to the upcoming release notes and the second the
past releases. This confused the generator, leading to the first part being
discarded. Indent the marker comment so that it's syntactically part of the
preceding item, and in particular doesn't split the list any more.
Change-Id: I357c51bb03e4e0d79a76d30158615fd9eda95ea8
Due to a mistake in the grammar, a dollar character implicitly escapes a second
dollar character that immediately follows, so that it cannot start an
interpolation. Unfortunately, this behaviour has since come to be relied upon,
so it cannot be fixed. Furthermore, the documentation on regular strings did
not mention this behaviour at all, while in the case of indented strings it was
rather implicit.
Mention it explicitly in both cases, and describe how an interpolation can
follow a dollar character (namely, by escaping that). Since we have to touch
that section anyway, state that any character (other than n, r, and t; but
notably including `$` even if not succeeded by `{`) can be escaped using a
backslash in regular strings.
Change-Id: I7e5d68a9a4130eec98ce8218b485168f4b31a677
Previous test implementation assumed that grep supports newlines
in patterns. It doesn't, so tests spuriously passed, even though
some tests outputs were broken.
This patches output (and expected output) before grepping,
so there're no newlines in pattern.
Change-Id: Ie6561f9f2e18b83d976f162269d20136e2595141
this is cursed. deeply and profoundly cursed. under NO CIRCUMSTANCES
must protocol serializer helpers be applied to temporaries! doing so
will inevitably cause dangling references and cause the entire thing
to crash. we need to do this even so to get rid of boost coroutines,
and likewise to encapsulate the serializers we suffer today at least
a little bit to allow a gradual migration to an actual IPC protocol.
(this isn't a problem that's unique to generators. c++ coroutines in
general cannot safely take references to arbitrary temporaries since
c++ does not have a lifetime system that can make this safe. -sigh-)
Change-Id: I2921ba451e04d86798752d140885d3c5cc08e146
this doesn't have a test because this code path is only reached by
clients that predate 2.4, and we really should not be caring about
those any more right now. even the test suite doesn't, and the few
tests that might care are disabled because they will not even work
Change-Id: Id9eb190065138fedb2c7d90c328ff9eb9d97385b
this is not completely necessary at this point because the parser right
now already returns a generator to pass through all input data it read,
but the nar parser *was* very lax and would accept nars that weren't in
canonical form (defined as the form dumpPath would return). nar hashing
depends on these things, and as such rewriting the parser now allows us
to reject non-canonical nars that extract to the same store contents as
their canonical counterpart but have different nar hashes despite that.
Change-Id: Iccd319e3bd5912d8297014c84c495edc59019bb7
Passing through root paths allows external programs to see
which nix and cacert are in a binary tarball,
e.g. to recreate it from substituters
Change-Id: I27431134df53bbc6623484f8a0822004b51f7c87
Although the comparison rules are ugly and we do not like various parts
of them, we must not hide them away for only catgirls to know about, so
the documentation should actually say how they work.
Change-Id: Ib20e9aa0e7b6486ade4f401035aafd85fbb08c91
This was filed as https://github.com/nixos/nix/issues/7584, but as far
as I can tell, the previous solution of POLLHUP works just fine on macOS
14. I've also tested on an ancient machine with macOS 10.15.7, which
also has POLLHUP work correctly.
It's possible this might regress some older versions of macOS that have
a kernel bug, but I went looking through the history on the sources and
didn't find anything that looked terribly convincingly like a bug fix
between 2020 and today. If such a broken version exists, it seems pretty
reasonable to suggest simply updating the OS.
Change-Id: I178a038baa000f927ea2cbc4587d69d8ab786843
This is caused by pthread_cancel effectively throwing a
not-specifically-identifiable C++ exception into the targeted thread,
which, if it is not rethrown, terminates the process entirely.
This is rather "impolite" behaviour, we would say. But thread
cancellation is *always* busted, and we should simply not use it where
unnecessary. It's particularly unnecessary when what we *actually* need
it for is, err, interrupting a poll(2).
That can in turn be achieved by simply listening to more stuff in the
poll, namely, a pipe, which we send a character to when needing to
stop the thread.
While looking at this code, we also investigated whether any of the
poll() madness is required, or was even *ever* required. Curiously we
found in the XNU kernel source code that the thing about needing to
listen to POLLHUP is probably *correct*, but switching it to POLLRDNORM
should not have made any difference at all. We've left a FIXME to look
into that further because what's written here is super janky.
94d3b45284/bsd/kern/sys_generic.c (L1751-L1758)
This is the crash on some Hydra machines:
Thread 1 (Thread 0x7f56b77776c0 (LWP 955542) (Exiting)):
0 0x00007f56b8e9b7dc in __pthread_kill_implementation () from /nix/store/m71p7f0nymb19yn1dascklyya2i96jfw-glibc-2.39-52/lib/libc.so.6
1 0x00007f56b8e49516 in raise () from /nix/store/m71p7f0nymb19yn1dascklyya2i96jfw-glibc-2.39-52/lib/libc.so.6
2 0x00007f56b8e31935 in abort () from /nix/store/m71p7f0nymb19yn1dascklyya2i96jfw-glibc-2.39-52/lib/libc.so.6
3 0x00007f56b8e327f3 in __libc_message_impl.cold () from /nix/store/m71p7f0nymb19yn1dascklyya2i96jfw-glibc-2.39-52/lib/libc.so.6
4 0x00007f56b8e8e8e9 in __libc_fatal () from /nix/store/m71p7f0nymb19yn1dascklyya2i96jfw-glibc-2.39-52/lib/libc.so.6
5 0x00007f56b8ea23c4 in unwind_cleanup () from /nix/store/m71p7f0nymb19yn1dascklyya2i96jfw-glibc-2.39-52/lib/libc.so.6
6 0x00007f56b9d2a1b8 in nix::triggerInterrupt() [clone .cold] () from /nix/store/sahgw550p621m9dy1pd7whl9c5g1g0p7-lix-2.90.0-rc1/lib/liblixutil.so
7 0x00007f56b990ac9d in std:🧵:_State_impl<std:🧵:_Invoker<std::tuple<nix::MonitorFdHup::MonitorFdHup(int)::{lambda()#1}> > >::_M_run() () from /nix/store/sahgw550p621m9dy1pd7whl9c5g1g0p7-lix-2.90.0-rc1/lib/liblixstore.so
8 0x00007f56b90e86d3 in execute_native_thread_routine () from /nix/store/c6r62m84hywf4i6qq1h28f13zv38yqyp-gcc-13.3.0-lib/lib/libstdc++.so.6
9 0x00007f56b8e99a42 in start_thread () from /nix/store/m71p7f0nymb19yn1dascklyya2i96jfw-glibc-2.39-52/lib/libc.so.6
10 0x00007f56b8f1905c in clone3 () from /nix/store/m71p7f0nymb19yn1dascklyya2i96jfw-glibc-2.39-52/lib/libc.so.6
As for testing, we've started a daemon with this change and verified it
deals with HUPs correctly on x86_64-linux, but I don't think we can
easily test the destructor behaviour without whatever Hydra was
doing that broke.
Change-Id: I29c7de0425674494b6e43c075810126c3ff77363
This also bans various sneaking of negative numbers from the language
into unsuspecting builtins as was exposed while auditing the
consequences of changing the Nix language integer type to a newtype.
It's unlikely that this change comprehensively ensures correctness when
passing integers out of the Nix language and we should probably add a
checked-narrowing function or something similar, but that's out of scope
for the immediate change.
During the development of this I found a few fun facts about the
language:
- You could overflow integers by converting from unsigned JSON values.
- You could overflow unsigned integers by converting negative numbers
into them when going into Nix config, into fetchTree, and into flake
inputs.
The flake inputs and Nix config cannot actually be tested properly
since they both ban thunks, however, we put in checks anyway because
it's possible these could somehow be used to do such shenanigans some
other way.
Note that Lix has banned Nix language integer overflows since the very
first public beta, but threw a SIGILL about them because we run with
-fsanitize=signed-overflow -fsanitize-undefined-trap-on-error in
production builds. Since the Nix language uses signed integers, overflow
was simply undefined behaviour, and since we defined that to trap, it
did.
Trapping on it was a bad UX, but we didn't even entirely notice
that we had done this at all until it was reported as a bug a couple of
months later (which is, to be fair, that flag working as intended), and
it's got enough production time that, aside from code that is IMHO buggy
(and which is, in any case, not in nixpkgs) such as
lix-project/lix#445, we don't think
anyone doing anything reasonable actually depends on wrapping overflow.
Even for weird use cases such as doing funny bit crimes, it doesn't make
sense IMO to have wrapping behaviour, since two's complement arithmetic
overflow behaviour is so *aggressively* not what you want for *any* kind
of mathematics/algorithms. The Nix language exists for package
management, a domain where bit crimes are already only dubiously in
scope to begin with, and it makes a lot more sense for that domain for
the integers to never lose precision, either by throwing errors if they
would, or by being arbitrary-precision.
This change will be ported to CppNix as well, to maintain language
consistency.
Fixes: lix-project/lix#423
Change-Id: I51f253840c4af2ea5422b8a420aa5fafbf8fae75
The actual motive here is the avoidance of integer overflow if we were
to make these use checked NixInts and retain the subtraction.
However, the actual *intent* of this code is a three-way comparison,
which can be done with operator<=>, so we should just do *that* instead.
Change-Id: I7f9a7da1f3176424b528af6d1b4f1591e4ab26bf
upcast_goal was only ever needed to break circular includes, but the
same solution that gave us upcast_goal also lets us fully remove it:
just upcast goals without a wrapper function, but only in .cc files.
Change-Id: I9c71654b2535121459ba7dcfd6c5da5606904032
this will let us turn copyNAR into a generator as well, which in turn is
necessary to turn the users of copyNAR into generators without resorting
to sinkToSource coroutines. currently this uses the SerializingTransform
in all cases, even for copyNAR where it is not necessary. should this be
a performance problem we can easily swap out the transform for one which
does not produce any bytes of its own, but that should not be necessary.
Change-Id: I7e685879318fcbb78d8b88abfddd7752360eb0ce
the sole remaining user of this function can use makeDecompressionSource
instead, while making the sinkToSource in the caller unnecessary as well
Change-Id: I4258227b5dbbb735a75b477d8a57007bfca305e9
the rewriting sink was just broken. when given a rewrite set that
contained a key that is also a proper infix of another key it was
possible to produce an incorrectly rewritten result if the writer
used the wrong block size. fixing this duplicates rewriteStrings,
to avoid this we'll rewrite rewriteStrings to use RewritingSource
in a new mode that'll allow rewrites we had previously forbidden.
Change-Id: I57fa0a9a994e654e11d07172b8e31d15f0b7e8c0
This updates the version of rnix used and refactors the code generally
to be more precise and capable in it's identification of both lambdas
and determining which documentation comments are attached.
Change-Id: Ib0dddabd71f772c95077f9d7654023b37a7a1fd2
this is supposed to be a set of outputs we want to always succeed for
releases. sadly we can't add nixos installer tests using lix to these
because the nixos test framework does not allow overriding nix in the
installer test suites due to unfortunate oversights in the framework.
Change-Id: I815520181ccca70a47205d38ba27e73529347f04
we want to be sure we can cross-build to aarch64 for releases, add a
target to our crossSystems list to make those cheacks easier to run.
Change-Id: Ieb65c1333a5232641ace0ba4d122fc7d528ebc04
`nix-collect-garbage --dry-run` previously elided the entire garbage
collection check, meaning that it would just exit the script without
printing anything.
This change makes the dry run flag instead set the GC action to
`gcReturnDead` rather than `gcDeleteDead`, and then continue with the
script. So if you set `--dry-run`, it will print the paths it *would*
have garbage collected, but not actually delete them.
I filed a bug for this: lix-project/lix#432 but then realised I could give fixing it a go myself.
Change-Id: I062dbf1a80bbab192b5fd0b3a453a0b555ad16f2
DrvInfo's query methods all use mutable fields to cache, but like.
that's basically the entire interface for DrvInfo. Not only that, but
these formerly-const-marked functions can even throw due to eval errors!
Changing this only required removing some `const` markers in nix-env,
and changing a single inline `queryInstalled()` call to be an lvalue
instead.
Change-Id: I796807118f3b35b0e93668b5e28210d9e521b2ae
Activities can set display attributes in their log output using the "Select
Graphics Rendition" functionality. To prevent interfering with subsequent text
displayed, these should be reset after writing the log line. The multiline
progress bar neglected to do this, resulting for example in a colorised
"building …" header in the next line. Reset the attributes properly, like the
standard progress bar already does.
Change-Id: I1dc69f4a1d747a76b83e8721a72d9bb0e5554488
This rather simple function existed just to check some flags,
but the response varies by platform. This is a perfect case for
our subclasses.
Change-Id: Ieb1732a8d024019236e0d0028ad843a24ec3dc59
size tracking can be done with a LengthSink and a tee. match tracking
was defeated by never having done any match tracking, all users would
see the same (empty) set of matches at all times. match tracking with
bytes offsets alone would not be sufficient in the general case, only
because computeHashModulo uses a single rewrite could it have worked.
Change-Id: Idb214b5222e0ea24f450f5505712a342b63d7570
this much more closely mimics what is actually happening: we're reading
data from somewhere else, actively, rather than passively waiting. with
the data flow matching the underlying system interactions better we can
remove a few sinkToSource calls that merely exists to undo the mismatch
caused by not treating subprocess output as a data source to begin with
Change-Id: If4abfc2f8398fb5e88c9b91a8bdefd5504bb2d11
this will let us also return a source for the program output later,
which will in turn make sinkToSource unnecessary for program output
processing. this may also reopen a path for provigin program input,
but that still needs a proper async io framework to avoid problems.
Change-Id: Iaf93f47db99c38cfaf134bd60ed6a804d7ddf688
Turns errors like this:
let
throwMsg = a: throw (a + " invalid bar");
in throwMsg "bullshit"
error:
… from call site
at «string»:3:4:
2| throwMsg = a: throw (a + " invalid bar");
3| in throwMsg "bullshit"
| ^
… while calling 'throwMsg'
at «string»:2:14:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
error: bullshit invalid bar
into errors like this:
let
throwMsg = a: throw (a + " invalid bar");
in throwMsg "bullshit"
error:
… from call site
at «string»:3:4:
2| throwMsg = a: throw (a + " invalid bar");
3| in throwMsg "bullshit"
| ^
… while calling 'throwMsg'
at «string»:2:14:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
… caused by explicit throw
at «string»:2:17:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
error: bullshit invalid bar
Change-Id: I593688928ece20f97999d1bf03b2b46d9ac338cb
Turns errors like:
let
somepkg.src = throw "invalid foobar";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
error: invalid foobar
into errors like:
let
somepkg.src = throw "invalid foobar";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
… while evaluating 'somepkg.src' to select 'meta' on it
at «string»:3:4:
2| somepkg.src = throw "invalid foobar";
3| in somepkg.src.meta
| ^
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
error: invalid foobar
And for type errors, from:
let
somepkg.src = "I'm not an attrset";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = "I'm not an attrset";
| ^
3| in somepkg.src.meta
… while selecting an attribute
at «string»:3:4:
2| somepkg.src = "I'm not an attrset";
3| in somepkg.src.meta
| ^
error: expected a set but found a string: "I'm not an attrset"
into:
let
somepkg.src = "I'm not an attrset";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = "I'm not an attrset";
| ^
3| in somepkg.src.meta
… while selecting 'meta' on 'somepkg.src'
at «string»:3:4:
2| somepkg.src = "I'm not an attrset";
3| in somepkg.src.meta
| ^
error: expected a set but found a string: "I'm not an attrset"
For the low price of an enumerate() and a lambda you too can have the
incorrect line of code actually show up in the trace!
Change-Id: Ic1491c86e33c167891bdac9adad6224784760bd6
Turns errors like:
let
errpkg = throw "invalid foobar";
in errpkg.meta
error:
… while calling the 'throw' builtin
at «string»:2:12:
1| let
2| errpkg = throw "invalid foobar";
| ^
3| in errpkg.meta
error: invalid foobar
into errors like:
let
errpkg = throw "invalid foobar";
in errpkg.meta
error:
… while evaluating 'errpkg' to select 'meta' on it
at «string»:3:4:
2| errpkg = throw "invalid foobar";
3| in errpkg.meta
| ^
… while calling the 'throw' builtin
at «string»:2:12:
1| let
2| errpkg = throw "invalid foobar";
| ^
3| in errpkg.meta
error: invalid foobar
For the low price of one try/catch, you too can have the incorrect line
of code actually show up in the trace!
Change-Id: If8d6200ec1567706669d405c34adcd7e2d2cd29d
Add a platform-specific function for starting sandboxed child.
Generally this just means startProcess, but on Linux we use flags
for clone to start a new namespace
Change-Id: I41c8aba62676a162388bbe5ab8a7518904c7b058
Add a new OS-specific hook called `prepareSandbox`, run before forking
On Darwin this is empty as nothing is required,
on Linux this creates the chroot directory and adds basic files,
and on platforms using a fallback this throws an exception
Change-Id: Ie30c38c387f2e0e5844b2afa32fd4d33b1180dae
generators are a better basis for serializers than streaming into sinks
as we do currently for many reasons, such as being usable as sources if
one wishes to (without requiring an intermediate sink to serialize full
data sets into memory, or boost coroutines to turn sinks into sources),
composing more naturally (as one can just yield a sub-generator instead
of being forced to wrap entire substreams into clunky functions or even
more clunky custom types to implement operator<< on), allowing wrappers
to transform data with clear ownership semantics (removing the need for
explicit memory allocations and Source wrappers), and many other things
Change-Id: I361d89ff556354f6930d9204f55117565f2f7f20
the `*Source` name is a slight misnomer since we do also have a
Source type, but we can probably live with this for time being.
Change-Id: I54eb2e59a4009014e324797f16b80b962759c7d3
not used anywhere yet, but we'll use this a lot soon for generators that
return file contents, wire protocol fragments, or indeed any byte stream
Change-Id: I01a46f9bf9d75aaf4a5d7662773b99f498862a28
this will be the basis of non-boost coroutines in lix. anything that is
a boost coroutine *should* be representable with a Generator coroutine,
and many things that are not currently boost coroutines but behave much
like one (such as, notably, serializers) should be as well. this allows
us to greatly simplify many things that look like iteration but aren't.
Change-Id: I2cebcefa0148b631fb30df4c8cfa92167a407e34
not printing activities at all when no progress information is available
hides *all* progress information from e.g. flake show. this is not ideal
and needs to be fixed, but the fix *still* has problems with flake show:
in multiline mode we will overwrite all useful flake show output as soon
as the progress bar is redrawn. flake show output is also mangled in any
number of other situations (like -v being set), so we should probably be
not too worried about it and fix progress reporting properly another day
Change-Id: I6d39d670e261bbae00560b6a8e15dec8e16b35c4
Previously, the progress bar had two subtly different states in which the bar
would not actually render, both with their own shortcomings: inactive (which
was irreversible) and paused (reversible, but swallowing logs). Furthermore,
there was no way of resetting the statistics, so a very bad solution was
implemented (243c0f18da) that would create a new
logger for each line of the repl, leaking the previous one and discarding the
value of printBuildLogs. Finally, if stderr was not attached to a TTY, the
update thread was started even though the logger was not active, violating the
invariant required by the destructor (which is not observed because the logger
is leaked).
In this commit, the two aforementioned states are unified into a single one,
which can be exited again, correctly upholds the invariant that the update
thread is only running while the progress bar is active, and does not swallow
logs. The latter change in behavior is not expected to be a problems in the
rare cases where the paused state was used before, since other loggers (like
the simple one) don't exhibit it anyway. The startProgressBar/stopProgressBar
API is removed due to being a footgun, and a new method for properly resetting
the progress is added.
Co-Authored-By: Qyriad <qyriad@qyriad.me>
Change-Id: I2b7c3eb17d439cd0c16f7b896cfb61239ac7ff3a
we do not have any of these warnings appearing at the moment, but it
seems like a good idea to enable [[nodiscard]] checking anyway. once
we start introducing more functions with must-use conditions we will
need such checking, and the rust stdlib has proven them very useful.
Change-Id: Ibb6b042ae1ec5f527f8dc2809a7816a4c1548ae2
The `allow-flake-configuration` option allows the user to control whether to
accept configuration options supplied by flakes. Unfortunately, setting this
to false really meant "ask each time" (with an option to remember the choice
for each specific option encountered). Let no mean no, and introduce (and
default to) a separate value for the "ask each time" behaviour.
Co-Authored-By: Jade Lovelace <lix@jade.fyi>
Change-Id: I7ccd67a95bfc92cffc1ebdc972d243f5191cc1b4
We previously allowed you to map any flake URL to any other flake URL,
including shorthand flakerefs, indirect flake URLs like `flake:nixpkgs`,
direct flake URLs like `github:NixOS/nixpkgs`, or local paths.
But flake registry entries mapping from direct flake URLs often come
from swapping the 'from' and 'to' arguments by accident, and even when
created intentionally, they may not actually work correctly.
This patch rejects those URLs (and fully-qualified flake: URLs), making
it harder to swap the arguments by accident.
Fixes#181.
Change-Id: I24713643a534166c052719b8770a4edfcfdb8cf3
This is a shameless layering violation in favour of UX. It falls back
trivially to "unknown", so it's purely a UX feature.
Diagnostic sample:
```
error: hash mismatch in fixed-output derivation '/nix/store/sjfw324j4533lwnpmr5z4icpb85r63ai-x1.drv':
likely URL: https://meow.puppy.forge/puppy.tar.gz
specified: sha256-AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=
got: sha256-a1Qvp3FOOkWpL9kFHgugU1ok5UtRPSu+NwCZKbbaEro=
```
Change-Id: I873eedcf7984ab23f57a6754be00232b5cb5b02c
this most notably affects `nix eval`: if there is no progress bar to be
shown and no activities going on we should not print anything at all. a
progress bar with no activities would print a bunch of terminal escapes
*and a space*, which is not helpful in simple cases like nix eval -E 1.
notably this does *not* affect nix eval called on non-terminal outputs,
but it is slightly confusing nevertheless (and not difficult to avoid).
fixes lix-project/lix#424
Change-Id: Iee793c79ba5a485d6606e0d292ed2eae6dfb7216
MAKEFLAGS hasn't been relevant since we switched off the Make
buildsystem and using the clang environment by default gives you clangd
by default which most developers will want.
Change-Id: I9c11d0613577047e6c908f049c1ffaca5fb5ff67
this gives about 20% performance improvements on pure parsing. obviously
it will be less on full eval, but depending on how much parsing is to be
done (e.g. including hackage-packages.nix or not) it's more like 4%-10%.
this has been tested (with thousands of core hours of fuzzing) to ensure
that the ASTs produced by the new parser are exactly the same as the old
one would have produced. error messages will change (sometimes by a lot)
and are not yet perfect, but we would rather leave this as is for later.
test results for running only the parser (excluding the variable binding
code) in a tight loop with inputs and parameters as given are promising:
- 40% faster on lix's package.nix at 10000 iterations
- 1.3% faster on nixpkgs all-packages.nix at 1000 iterations
- equivalent on all of nixpkgs concatenated at 100 iterations
(excluding invalid files, each file surrounded with parens)
more realistic benchmarks are somewhere in between the extremes, parsing
once again getting the largest uplift. other realistic workloads improve
by a few percentage points as well, notably system builds are 4% faster.
Benchmarks summary (from ./bench/summarize.jq bench/bench-*.json)
old/bin/nix --extra-experimental-features 'nix-command flakes' eval -f bench/nixpkgs/pkgs/development/haskell-modules/hackage-packages.nix
mean: 0.408s ± 0.025s
user: 0.355s | system: 0.033s
median: 0.389s
range: 0.388s ... 0.442s
relative: 1
new/bin/nix --extra-experimental-features 'nix-command flakes' eval -f bench/nixpkgs/pkgs/development/haskell-modules/hackage-packages.nix
mean: 0.332s ± 0.024s
user: 0.279s | system: 0.033s
median: 0.314s
range: 0.313s ... 0.361s
relative: 0.814
---
old/bin/nix --extra-experimental-features 'nix-command flakes' eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
mean: 6.133s ± 0.022s
user: 5.395s | system: 0.437s
median: 6.128s
range: 6.099s ... 6.183s
relative: 1
new/bin/nix --extra-experimental-features 'nix-command flakes' eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
mean: 5.925s ± 0.025s
user: 5.176s | system: 0.456s
median: 5.934s
range: 5.861s ... 5.943s
relative: 0.966
---
GC_INITIAL_HEAP_SIZE=10g old/bin/nix eval --extra-experimental-features 'nix-command flakes' --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
mean: 4.503s ± 0.027s
user: 3.731s | system: 0.547s
median: 4.499s
range: 4.478s ... 4.541s
relative: 1
GC_INITIAL_HEAP_SIZE=10g new/bin/nix eval --extra-experimental-features 'nix-command flakes' --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
mean: 4.285s ± 0.031s
user: 3.504s | system: 0.571s
median: 4.281s
range: 4.221s ... 4.328s
relative: 0.951
---
old/bin/nix --extra-experimental-features 'nix-command flakes' search --no-eval-cache github:nixos/nixpkgs/e1fa12d4f6c6fe19ccb59cac54b5b3f25e160870 hello
mean: 16.475s ± 0.07s
user: 14.088s | system: 1.572s
median: 16.495s
range: 16.351s ... 16.536s
relative: 1
new/bin/nix --extra-experimental-features 'nix-command flakes' search --no-eval-cache github:nixos/nixpkgs/e1fa12d4f6c6fe19ccb59cac54b5b3f25e160870 hello
mean: 15.973s ± 0.013s
user: 13.558s | system: 1.615s
median: 15.973s
range: 15.946s ... 15.99s
relative: 0.97
---
Change-Id: Ie66ec2d045dec964632c6541e25f8f0797319ee2
These are totally available and you can just turn them on, but they have
very bad dependency tracking and thus bloat incremental change times,
which is not really ok.
Change-Id: Iaa63ed18a789e74fcb757248cd24c3b194afcc80
This reverts commit 35eec921af.
Reason for revert: Regressed nix-eval-jobs, and it appears to be this change is buggy/missing a case. It just needs another pass.
Code causing the problem in n-e-j, when invoked with `nix-eval-jobs --flake '.#hydraJobs'`:
```
n-e-j/tests/assets » ../../build/src/nix-eval-jobs --meta --workers 1 --flake .#hydraJobs
warning: unknown setting 'trusted-users'
warning: `--gc-roots-dir' not specified
error: unsupported Git input attribute 'dir'
error: worker error: error: unsupported Git input attribute 'dir'
```
```
nix::Value *vRoot = [&]() {
if (args.flake) {
auto [flakeRef, fragment, outputSpec] =
nix::parseFlakeRefWithFragmentAndExtendedOutputsSpec(
args.releaseExpr, nix::absPath("."));
nix::InstallableFlake flake{
{}, state, std::move(flakeRef), fragment, outputSpec,
{}, {}, args.lockFlags};
return flake.toValue(*state).first;
} else {
return releaseExprTopLevelValue(*state, autoArgs, args);
}
}();
```
Inspecting the program behaviour reveals that `dir` was in fact set in the URL going into the fetcher. This is in turn because unlike in the case changed in this commit, it was not erased before handing it to libfetchers, which is probably just a mistake.
```
(rr) up
3 0x00007ffff60262ae in nix::fetchers::Input::fromURL (url=..., requireTree=requireTree@entry=true) at src/libfetchers/fetchers.cc:39
warning: Source file is more recent than executable.
39 auto res = inputScheme->inputFromURL(url, requireTree);
(rr) p url
$1 = (const nix::ParsedURL &) @0x7fffdc874190: {url = "git+file:///home/jade/lix/nix-eval-jobs",
base = "git+file:///home/jade/lix/nix-eval-jobs", scheme = "git+file", authority = std::optional<std::string> = {[contained value] = ""},
path = "/home/jade/lix/nix-eval-jobs", query = std::map with 1 element = {["dir"] = "tests/assets"}, fragment = ""}
(rr) up
4 0x00007ffff789d904 in nix::parseFlakeRefWithFragment (url=".#hydraJobs", baseDir=std::optional<std::string> = {...},
allowMissing=allowMissing@entry=false, isFlake=isFlake@entry=true) at src/libexpr/flake/flakeref.cc:179
warning: Source file is more recent than executable.
179 FlakeRef(Input::fromURL(parsedURL, isFlake), getOr(parsedURL.query, "dir", "")),
(rr) p parsedURL
$2 = {url = "git+file:///home/jade/lix/nix-eval-jobs", base = "git+file:///home/jade/lix/nix-eval-jobs", scheme = "git+file",
authority = std::optional<std::string> = {[contained value] = ""}, path = "/home/jade/lix/nix-eval-jobs", query = std::map with 1 element = {
["dir"] = "tests/assets"}, fragment = ""}
(rr) list
174
175 if (pathExists(flakeRoot + "/.git/shallow"))
176 parsedURL.query.insert_or_assign("shallow", "1");
177
178 return std::make_pair(
179 FlakeRef(Input::fromURL(parsedURL, isFlake), getOr(parsedURL.query, "dir", "")),
180 fragment);
181 }
```
Change-Id: Ib55a882eaeb3e59228857761dc1e3b2e366b0f5e
On operating systems where /bin/sh is not Bash, some scripts are invalid
because of bashisms, and building Lix fails with errors like this:
`render-manpage.sh: 3: set: Illegal option -o pipefail`
This modifies all scripts that use a `/bin/sh` shebang to `/usr/bin/env
bash`, including currently POSIX-compliant ones, to prevent any future
confusion.
Change-Id: Ia074cc6db42d40fc59a63726f6194ea0149ea5e0
I was working on nix-eval-jobs with a dev shell with some shenanigans to
run against a locally built Lix and it was getting really annoying when
`nix develop ../lix#` was messing up my other git repo's hooks.
This is a fix via blunt force, but it is at least obvious how it works.
Change-Id: Ia29eeb5be57ab6a2c88451c00ea18a51e4dfe65e
This is a squash of upstream PRs #10303, #10312 and #10883.
fix: Treat empty TMPDIR as unset
Fixes an instance of
nix: src/libutil/util.cc:139: nix::Path nix::canonPath(PathView, bool): Assertion `path != ""' failed.
... which I've been getting in one of my shells for some reason.
I have yet to find out why TMPDIR was empty, but it's no reason for
Nix to break.
(cherry picked from commit c3fb2aa1f9d1fa756dac38d3588c836c5a5395dc)
fix: Treat empty XDG_RUNTIME_DIR as unset
See preceding commit. Not observed in the wild, but is sensible
and consistent with TMPDIR behavior.
(cherry picked from commit b9e7f5aa2df3f0e223f5c44b8089cbf9b81be691)
local-derivation-goal.cc: Reuse defaultTempDir()
(cherry picked from commit fd31945742710984de22805ee8d97fbd83c3f8eb)
fix: remove usage of XDG_RUNTIME_DIR for TMP
(cherry picked from commit 1363f51bcb24ab9948b7b5093490a009947f7453)
tests/functional: Add count()
(cherry picked from commit 6221770c9de4d28137206bdcd1a67eea12e1e499)
Remove uncalled for message
(cherry picked from commit b1fe388d33530f0157dcf9f461348b61eda13228)
Add build-dir setting
(cherry picked from commit 8b16cced18925aa612049d08d5e78eccbf0530e4)
Change-Id: Ic7b75ff0b6a3b19e50a4ac8ff2d70f15c683c16a
The stdenv phases don’t actually do anything (at least not anymore),
and our justfile doesn’t behave the same as our docs.
This patch removes the stdenv phases from the docs, documents our
usage of just, and makes `just setup` heed `$mesonFlags`.
Fixes#413.
Fixes#414.
Change-Id: Ieb0b2a8ae420526238b5f9a73d7849ec6919995d
Following the latest hacking.md currently fails because of a missing
include in upstream editline. This patch fixes the build by adding
that missing include.
Fixes#410.
Change-Id: Iefd4cb687ed3da71ccda9fe9624f38e6ef4623e5
this was only used in one place, and that place has been rewritten to
use a temporary file instead. keeping this around is not very helpful
at this time, and in any case we'd be better off rewriting subprocess
handling in rust where we not only have a much safer library for such
things but also async frameworks necessary for this easily available.
Change-Id: I6f8641b756857c84ae2602cdf41f74ee7a1fda02
we want to remove runProgram's ability to provide stdin to a process
because the concurrency issues of handling both stdin and stdout are
much more pronounced once runProgram returns not is collected output
but a source. this is possible in the current c++ framework, however
it isn't necessary in almost all cases (as demonstrated by only this
single user existing) and in much better handled with a proper async
concurrency model that lets the caller handle both at the same time.
Change-Id: I29da1e1ad898d45e2e33a7320b246d5003e7712b
This is primarily for readability, but iwrc chaining std::string's
operator+ is also pretty scuffed performance-wise, and this was doing a
lot of operator+ chainging.
Change-Id: I9f25235df153eb2bbb491f1ff7ebbeed9a8ec985
copy-constructing or assigning from pid_t can easily lead to duplicate
Pid instances for the same process if a pid_t was used carelessly, and
Pid itself was copy-constructible. both could cause surprising results
such as killing processes twice (which could become very problemantic,
but luckily modern systems don't reuse PIDs all that quickly), or more
than one piece of the code believing it owns a process when neither do
Change-Id: Ifea7445f84200b34c1a1d0acc2cdffe0f01e20c6
this is only used in one place, and only to set a nicer error message on
EndOfFile. the only caller that actually *catches* this exception should
provide an error message in that catch block rather than forcing support
for setting error message so deep into the stack. copyStorePath is never
called outside of PathSubstitutionGoal anyway, which catches everything.
Change-Id: Ifbae8706d781c388737706faf4c8a8b7917ca278
LocalDerivationGoal includes a large number of low-level sandboxing
primitives for Darwin and Linux, intermingled with ifdefs.
Start creating platform-specific classes to make it easier to add new
platforms and review platform-specific code.
This change only creates support infrastructure and moves two function,
more functions will be moved in future changes.
Change-Id: I9fc29fa2a7345107d4fc96c46fa90b4eabf6bb89
This comes quite often when the available job slots on all remote
builders are exhausted and this is pretty spammy.
This isn't really an issue, but expected behavior.
A better way to display this is a nom-like approach where all scheduled
builds are shown in a tree and pending builds are being marked as such
IMHO.
Change-Id: I6bc14e6054f84e3eb0768127b490e263d8cdcf89
The original idea was to fix lix#174, but for a user friendly solution,
I figured that we'd need more consistency:
* Invalid query params will cause an error, just like invalid
attributes. This has the following two consequences:
* The `?dir=`-param from flakes will be removed before the URL to be
fetched is passed to libfetchers.
* The tarball fetcher doesn't allow URLs with custom query params
anymore. I think this was questionable anyways given that an
arbitrary set of query params was silently removed from the URL you
wanted to fetch. The correct way is to use an attribute-set
with a key `url` that contains the tarball URL to fetch.
* Same for the git & mercurial fetchers: in that case it doesn't even
matter though: both fetchers added unused query params to the URL
that's passed from the input scheme to the fetcher (`url2` in the code).
It turns out that this was never used since the query parameters were
erased again in `getActualUrl`.
* Validation happens for both attributes and URLs. Previously, a lot of
fetchers validated e.g. refs/revs only when specified in a URL and
the validity of attribute names only in `inputFromAttrs`.
Now, all the validation is done in `inputFromAttrs` and `inputFromURL`
constructs attributes that will be passed to `inputFromAttrs`.
* Accept all attributes as URL query parameters. That also includes
lesser used ones such as `narHash`.
And "output" attributes like `lastModified`: these could be declared
already when declaring inputs as attribute rather than URL. Now the
behavior is at least consistent.
Personally, I think we should differentiate in the future between
"fetched input" (basically the attr-set that ends up in the lock-file)
and "unfetched input" earlier: both inputFrom{Attrs,URL} entrypoints
are probably OK for unfetched inputs, but for locked/fetched inputs
a custom entrypoint should be used. Then, the current entrypoints
wouldn't have to allow these attributes anymore.
Change-Id: I1be1992249f7af8287cfc37891ab505ddaa2e8cd
Add the log-formats `multiline` and `multiline-with-logs` which offer
multiple current active building status lines.
Change-Id: Idd8afe62f8591b5d8b70e258c5cefa09be4cab03
If we've consumed the entire input, that doesn't actually mean we're
done decompressing - there might be more output left. This worked (?)
in most cases because the input and output sizes are pretty comparable,
but sometimes they're not and then things get very funny.
Change-Id: I73435a654a911b8ce25119f713b80706c5783c1b
I did a whole bunch of `git log -S` to find out exactly when all these
things were obsoleted and found the commit in which their usage was
removed, which I have added in either the error message or a comment.
I've also made *some* of the version checks into static asserts for when
we update the minimum supported protocol version.
In the end this is not a lot of code we are deleting, but it's code that
we will never have to support into the future when we build a protocol
bridge, which is why I did it. It is not in the support baseline.
Change-Id: Iea3c80795c75ea74f328cf7ede7cbedf8c41926b
without this we will not be able to get rid of makeDecompressionSink,
which in turn will be necessary to get rid of sourceToSink (since the
libarchive archive wrapper *must* be a Source due to api limitations)
Change-Id: Iccd3d333ba2cbcab49cb5a1d3125624de16bce27
don't consume a sink, return a source instead. the only reason to not do
this is a very slight reduction in dynamic allocations, but since we are
going to *at least* do disk io that will not be a lot of overhead anyway
Change-Id: Iae2f879ec64c3c3ac1d5310eeb6a85e696d4614a
if we want have getFile return a source instead of consuming a sink
we'll have to disambiguate this overload another way, eg like this.
Change-Id: Ia26de2020c309a37e7ccc3775c1ad1f32e0a778b
This happened during a PathSubstitutionGoal of a .drv file:
substitution of '/tmp/jade/nix-test/ca/eval-store/store/1lj7lsq5y0f25mfbnq6d3zd0bw5ay33n-dependencies-input-2.drv'
What happened here is that since PathSubstitutionGoal is not a
DerivationGoal, in production builds, the UB was not caught, since it
would early-exit from failing a dynamic_cast to DerivationGoal * on the
very next line, but before the null reference was ever used.
This was nonetheless UB. The fix should be to just rearrange the two
lines; I don't think there is a further bug there, since *substituting a
.drv* **necessarily** means you cannot have the representation of
the derivation as would be necessary for drv to not be null there.
Test failure:
++(eval-store.sh:12) _RR_TRACE_DIR=/home/jade/.local/share/rr rr record -- nix build -f dependencies.nix --eval-store /tmp/jade/nix-test/ca/eval-store/eval-store -o /tmp/jade/nix-test/ca/eval-store/result
don't know how to build these paths:
/tmp/jade/nix-test/ca/eval-store/store/6y51mf0p57ggipgab6hdjabbvplzsicq-dependencies-top.drv
copying 1 paths...
copying path '/tmp/jade/nix-test/ca/eval-store/store/8027afyvqb87y1sf5xhdkqsflqn1ziy8-dependencies.builder0.sh' to 'local'...
copying 1 paths...
copying path '/tmp/jade/nix-test/ca/eval-store/store/7r5pqyncvfgrryf9gzy1z56z3xigi61x-builder-dependencies-input-0.sh' to 'local'...
copying 1 paths...
copying path '/tmp/jade/nix-test/ca/eval-store/store/nhmgm87zlqy3ks96dxrn7l37b72azi99-builder-dependencies-input-1.sh' to 'local'...
copying 1 paths...
copying path '/tmp/jade/nix-test/ca/eval-store/store/nq4qa2j6y8ajqazlfq6h46ck637my1n6-builder-dependencies-input-2.sh' to 'local'...
copying 1 paths...
copying path '/tmp/jade/nix-test/ca/eval-store/store/6vh0vna9l5afck01y7iaks3hm9ikwqyj-builder-fod-input.sh' to 'local'...
building '/tmp/jade/nix-test/ca/eval-store/store/gy91pqymf2nc5v7ld1bad94xpwxdi25s-dependencies-input-0.drv'...
building '/tmp/jade/nix-test/ca/eval-store/store/w7wlkjx97ivmnrymkac5av3nyp94hzvq-dependencies-input-1.drv'...
../src/libstore/build/derivation-goal.cc:1556:22: runtime error: reference binding to null pointer of type 'Derivation'
0 0x734ba59a6886 in nix::DerivationGoal::waiteeDone(std::shared_ptr<nix::Goal>, nix::Goal::ExitCode) /home/jade/lix/lix2/build/src/libstore/build/derivation-goal.cc:1556:12
1 0x734ba59c0962 in nix::Goal::amDone(nix::Goal::ExitCode, std::optional<nix::Error>) /home/jade/lix/lix2/build/src/libstore/build/goal.cc:95:25
2 0x734ba5a1c44a in nix::PathSubstitutionGoal::done(nix::Goal::ExitCode, nix::BuildResult::Status, std::optional<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>>) /home/jade/lix/lix2/build/src/libstore/build/substitution-goal.cc:38:5
3 0x734ba5a1b454 in nix::PathSubstitutionGoal::init() /home/jade/lix/lix2/build/src/libstore/build/substitution-goal.cc:56:9
4 0x734ba5a2a6c6 in nix::Worker::run(std::set<std::shared_ptr<nix::Goal>, nix::CompareGoalPtrs, std::allocator<std::shared_ptr<nix::Goal>>> const&) /home/jade/lix/lix2/build/src/libstore/build/worker.cc:320:23
5 0x734ba59b93d8 in nix::Store::buildPathsWithResults(std::vector<nix::DerivedPath, std::allocator<nix::DerivedPath>> const&, nix::BuildMode, std::shared_ptr<nix::Store>) /home/jade/lix/lix2/build/src/libstore/build/entry-points.cc:60:12
6 0x734ba663c107 in nix::Installable::build2(nix::ref<nix::Store>, nix::ref<nix::Store>, nix::Realise, std::vector<nix::ref<nix::Installable>, std::allocator<nix::ref<nix::Installable>>> const&, nix::BuildMode) /home/jade/lix/lix2/build/src/libcmd/installables.cc:637:36
Change-Id: Id0e651e480bebf6356733b01bc639e9bb59c7bd0
This was generating an out-of-range verbosity value. We should just
process it as an int and then convert to verbosity with a clamping
function, which trivially avoids any domain type violations.
Change-Id: I0ed20da8e1496a1225ff3008b76827d99265d404
This is really just a question of turning off the production sanitizer
configuration so we get nice diagnostics. Not much else to say.
Change-Id: I76bd6d225320056ed95bd89955f00beff2db0d2f
We got UBSan working on Lix, so we of course immediately found a bug and
some definitely nonsense behaviour.
Accessing `pureEval` or `restrictEval` from a default setting value is
nonsense, since they would never be actually set by the time that value
is set so they are not going to do anything. The configuration is not
applied in an initializer (and even if it were, it's not going to be in
the right order).
After looking into *that*, we hunted down what actually was applying
these, since clearly this code did not do anything. The EvalState
constructor should have a "search path added and removed here :)" sign
on it, because that's where it is done. We added an explicit
initialization of the optional in there because it was otherwise unclear
why pureEval also has the search path to allowed paths setup code run.
We then realized that the `pureEval` documentation was *also* bogus, and
we rewrote it. In so doing, we realized that we forgot to file a bug to
make `builtins.storePath` work in pure eval mode, so we filed one of
those: lix-project/lix#402
Yaks have been thoroughly shorn.
UBSan report:
../src/libexpr/eval-settings.cc:66:10: runtime error: member call on address 0x752fa9a13060 which does not point to an object of type 'nix::BaseSetting<b
ool>'
0x752fa9a13060: note: object has invalid vptr
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
^~~~~~~~~~~~~~~~~~~~~~~
invalid vptr
0 0x752fa95106a6 in nix::EvalSettings::getDefaultNixPath[abi:cxx11]() /home/jade/lix/lix2/build/src/libexpr/eval-settings.cc:66:10
1 0x752fa950e420 in nix::EvalSettings::EvalSettings() /home/jade/lix/lix2/build/src/libexpr/eval-settings.hh:36:15
2 0x752fa9469f1f in __cxx_global_var_init.50 /home/jade/lix/lix2/build/src/libexpr/eval-settings.cc:98:14
3 0x752fa9469f1f in _GLOBAL__sub_I_eval_settings.cc /home/jade/lix/lix2/build/src/libexpr/eval-settings.cc
4 0x752fabbd308d in call_init (/nix/store/k7zgvzp2r31zkg9xqgjim7mbknryv6bs-glibc-2.39-52/lib/ld-linux-x86-64.so.2+0x508d) (BuildId: a5b8228edc9f16078ac3c894af964eeb990ecb4c)
5 0x752fabbd317b in _dl_init (/nix/store/k7zgvzp2r31zkg9xqgjim7mbknryv6bs-glibc-2.39-52/lib/ld-linux-x86-64.so.2+0x517b) (BuildId: a5b8228edc9f16078ac3c894af964eeb990ecb4c)
6 0x752fabbe9c2f in _dl_start_user (/nix/store/k7zgvzp2r31zkg9xqgjim7mbknryv6bs-glibc-2.39-52/lib/ld-linux-x86-64.so.2+0x1bc2f) (BuildId: a5b8228edc9f16078ac3c894af964eeb990ecb4c)
Change-Id: I5d8ffb7bfbe24b6584020ac74eed93d9f2e6d111
even the transfer function is not all that necessary since there aren't
that many users, but we'll keep it for now. we could've kept both names
but we also kind of want to use `download` for something else very soon
Change-Id: I005e403ee59de433e139e37aa2045c26a523ccbf
The lock usage was obviously wrong so it was entirely serialized. This
has the predicted speedups, the only question is whether it is sound
because it's exposing a bunch of new code to actual concurrency.
I did audit all the stores' queryPathInfoUncached implementations and
they all look *intended* to be thread safe, but whether that is actually
sound or not: lol lmao. I am highly confident in the s3 one because it
is calling s3 sdk methods that are thread safe and has no actual state.
Others are using Pool and look to be *supposed* to be thread safe, but
unsure if they actually are.
Change-Id: I0369152a510e878b5ac56c9ac956a98d48cd5fef
Found by looking for interesting asan reports from the test suite.
What happened here is that name got overwritten, but it was what
actually held the backing memory for the thing it got overwritten by,
which was a by-reference value coming out of std::regex.
Due to absurd reasons I cannot seem to use a string_view iterator here,
so I just copy the string with a longer lifetime instead. idk lol
==3796364==ERROR: AddressSanitizer: heap-use-after-free on address 0x503000014c61 at pc 0x74843523bf1d bp 0x7ffc68351330 sp 0x7ffc68350af0
READ of size 3 at 0x503000014c61 thread T0
0 0x74843523bf1c in __asan_memcpy (/nix/store/mzhqknx2mc94jdz4n320hn1lml86398y-clang-wrapper-17.0.6/resource-root/lib/linux/libclang_rt.asan-x86_64.so+0x159f1c)
1 0x6403cf6cbff4 in std::char_traits<char>::copy(char*, char const*, unsigned long) /nix/store/14c6s4xzhy14i2b05s00rjns2j93gzz4-gcc-13.2.0/include/c++/13.2.0/bits/char_traits.h:445:33
<...>
7 0x6403cf6cbff4 in std::__cxx11::sub_match<__gnu_cxx::__normal_iterator<char const*, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>>>::str() const /nix/store/14c6s4xzhy14i2b05s00rjns2j93gzz4-gcc-13.2.0/include/c++/13.2.0/bits/regex.h:966:6
8 0x6403cf6cbff4 in std::__cxx11::sub_match<__gnu_cxx::__normal_iterator<char const*, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>>>::operator std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>() const /nix/store/14c6s4xzhy14i2b05s00rjns2j93gzz4-gcc-13.2.0/include/c++/13.2.0/bits/regex.h:955:16
9 0x6403cf6cbff4 in nix::getClosureInfo[abi:cxx11](nix::ref<nix::Store>, nix::StorePath const&) /home/jade/lix/lix2/build/src/nix/diff-closures.cc:37:26
10 0x6403cf6cd70c in nix::printClosureDiff(nix::ref<nix::Store>, nix::StorePath const&, nix::StorePath const&, std::basic_string_view<char, std::char_traits<char>>) /home/jade/lix/lix2/build/src/nix/diff-closures.cc:54:25
11 0x6403cf873331 in CmdProfileDiffClosures::run(nix::ref<nix::Store>) /home/jade/lix/lix2/build/src/nix/profile.cc:479:17
<...>
0x503000014c61 is located 17 bytes inside of 21-byte region [0x503000014c50,0x503000014c65)
freed by thread T0 here:
0 0x748435250470 in operator delete(void*) (/nix/store/mzhqknx2mc94jdz4n320hn1lml86398y-clang-wrapper-17.0.6/resource-root/lib/linux/libclang_rt.asan-x86_64.so+0x16e470)
<...>
6 0x6403cf6cbda2 in std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>::~basic_string() /nix/store/14c6s4xzhy14i2b05s00rjns2j93gzz4-gcc-13.2.0/include/c++/13.2.0/bits/basic_string.h:792:9
7 0x6403cf6cbda2 in nix::getClosureInfo[abi:cxx11](nix::ref<nix::Store>, nix::StorePath const&) /home/jade/lix/lix2/build/src/nix/diff-closures.cc:36:13
8 0x6403cf6cd70c in nix::printClosureDiff(nix::ref<nix::Store>, nix::StorePath const&, nix::StorePath const&, std::basic_string_view<char, std::char_traits<char>>) /home/jade/lix/lix2/build/src/nix/diff-closures.cc:54:25
<...>
previously allocated by thread T0 here:
0 0x74843524fa38 in operator new(unsigned long) (/nix/store/mzhqknx2mc94jdz4n320hn1lml86398y-clang-wrapper-17.0.6/resource-root/lib/linux/libclang_rt.asan-x86_64.so+0x16da38)
<...>
9 0x6403cf6cb68c in std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>::basic_string<std::basic_string_view<char, std::char_traits<char>>, void>(std::basic_string_view<char, std::char_traits<char>> const&, std::allocator<char> const&) /nix/store/14c6s4xzhy14i2b05s00rjns2j93gzz4-gcc-13.2.0/include/c++/13.2.0/bits/basic_string.h:784:4
10 0x6403cf6cb68c in nix::getClosureInfo[abi:cxx11](nix::ref<nix::Store>, nix::StorePath const&) /home/jade/lix/lix2/build/src/nix/diff-closures.cc:33:21
11 0x6403cf6cd70c in nix::printClosureDiff(nix::ref<nix::Store>, nix::StorePath const&, nix::StorePath const&, std::basic_string_view<char, std::char_traits<char>>) /home/jade/lix/lix2/build/src/nix/diff-closures.cc:54:25
12 0x6403cf873331 in CmdProfileDiffClosures::run(nix::ref<nix::Store>) /home/jade/lix/lix2/build/src/nix/profile.cc:479:17
<...>
Change-Id: I9c408cf2a3d3155f9f7b2ad4848ee6c741331db0
There was a previously-unused move constructor that just called abort,
which makes no sense since it ought to just be `= delete` if you don't
want one (commit history says it was Eelco doing an optimistic
performance optimisation in 2016, so it probably would not pass review
today).
However, a Lock has some great reasons to be moved! You might need to
unlock it early, for instance, or give it to someone else. So we change
the move constructor to instead hollow out the moved-from object and
make it unusable.
Change-Id: Iff2a4c2f7ebd0a558c4866d4dfe526bc8558bed7
Unfetched submodules are included as empty directories in archives, so they end
up as such in the store when fetched in clean mode. Make sure the same happens
in dirty mode too. Fortunately, they are already correctly represented in the
ls-files output, so we just need to make sure to include the empty directory in
our filter.
Fixes: https://github.com/NixOS/nix/issues/6247
Change-Id: I60d06ff360cfa305d081b920838c893c06da801c
* changes:
libstore client: remove remaining dead code
libstore: refuse to serialise ancient protocols
libstore client: remove support for <2.3 clients
libstore daemon: remove very old protocol support (<2.3)
Delete old ValidPathInfo test, fix UnkeyedValidPathInfo
Set up minimum protocol version
with the prepatory work done this mostly means turning plain pointers
into unique_ptrs, with all the associated churn that necessitates. we
might want to change some of these to box_ptrs at some point as well,
but that would be a semantic change that isn't fully appropriate yet.
Change-Id: I0c238c118617420650432f4ed45569baa3e3f413
almost all places where Exprs are passed as pointers expect the pointers
to be non-null. pass them as references to encode this constraint in the
type system as well (and also communicate that Exprs must not be freed).
Change-Id: Ia98f166fec3c23151f906e13acb4a0954a5980a2
now that destructors are hooked up we want to give the C skeleton every
real chance to actually run them. since bison does not call destructors
on values that have been passed to semantic actions even when an action
causes an abort we will also have to delete some things manually still.
Change-Id: Ia22bdaa9e969b74e17a6c496e35e6c2d86b7d750
this doesn't help much yet since the state objects themselves also leak
all memory they are given, but it is a first necessary step to properly
managing parser memory. notably we have to clear $$ when returning from
the parser since even the start symbol is subject to automatic deletion
by the bison-generated parser before returning control to the call site
Change-Id: I80245b0c747308e80923e7f18ce4e1a4898f93b0
This uses a minor hack in which we check the rl_line_buffer global
variable to workaround editline not including the colon in its
completion callback.
Fixes#361
Change-Id: Id159d209c537443ef5e37a975982e8e12ce1f486
The UnkeyedValidPathInfo test was testing an ancient version but not the
current version. Doesn't make much sense to me.
Change-Id: Ib476a4297d9075f2dcd31a073b3e7b149b2189af
Well that is embarrassing. I think the proper thing is to just quickly
ship a -rc2, so I will open a backport of this.
$ curl https://releases.lix.systems/manifest.nix
# This file was generated by releng/create_release.xsh in Lix
{
aarch64-linux = "/nix/store/mrbknq000af7iaqhk53bnpk1fvfrc1xp-lix-2.90.0-rc1";
aarch64-darwin = "/nix/store/z1bdccwsk34iv491aygh0mm1lgpf7yy1-lix-2.90.0-rc1";
x86_64-darwin = "/nix/store/xqvfpdhzck44v6kyhgi9f8v0xybksb6a-lix-2.90.0-rc1";
x86_64-linux = "/nix/store/h2ml0nx4477r84y82jgm8y80jpr72gqw-lix-release-tarballs";
}
Change-Id: I9cf007c850c2faf995a3a9d92457517b8501d1a1
* changes:
Change error messages about 'invalid paths' to 'path does not exist'.
Add a clearer error message for InvalidPathError during evaluation
Harmonise the Store::queryPathInfoUncached interface
This:
- Consistently returns `nullptr` for a non-existent
store path, instead of a mix of `nullptr` and
throwing exceptions.
- If a store returns "bad" store paths in response
to a request (e.g. incorrect hash or name), don't
cache this result. This removes some duplication
of code at the cache-access layer of queryPathInfo()
checking this, and allows us to provide more
specific errors.
Part of #270.
Change-Id: I86612c6499b1a37ab872c712c2304d6a3ff19edb
This adds the nix executable as an input argument to the custom targets
that build the manual (HTML, and the man pages), so that changes to
things like src/nix/nix.md cause the correct rebuilds
Change-Id: Iffaa2c14acbfc721caef7b8cae9b53ecd365f26d
FreeBSD uses libunwind unwind.h, which does not require
`_GNU_SOURCE` to expose `_Unwind_Backtrace`.
Tell Boost that.
Change-Id: I81e767967b1458118b86d212b5552d4d0a1200d9
This commit constitutes the branch-off for 2.91. The parent of this
commit will be the branch point for release-2.90.
Change-Id: I7f047545df29a9cff93346137c865dcbf1415488
For now we just need to put the release notes in the final spot. We will
have to fix the date on both 2.90 and 2.91 branches, but such as it is.
Release created with releng/create_release.xsh
Closes: lix-project/lix#318
Change-Id: I38e79b40e7f632c8a286f2f09865a84dc93eca90
This merge commit returns to the previous state prior to the release but leaves the tag in the branch history.
Release created with releng/create_release.xsh
Change-Id: I92296a1746b54a081004fe2bb23e9e37fd33b3e5
* changes:
releng: add sha256 for the manual tarball
releng: fix upload of multiarch images to forgejo
releng: fix git checking
releng: fix logging inside interactive xonsh
releng: support multiple systems
version: update to 2.90.0-rc1
Forgejo appears to immediately delete registry content that is
overwritten. This means that we are forced to delete our previous
workaround of making a temporary tag and use a new, more absurd
workaround of making an entire temporary image that we basically only
need to create to get its hash.
However, on the plus side, the new workaround doesn't create garbage
tags to begin with, which means that we don't have to deal with GitHub
not implementing the standardized tag delete endpoint and instead
only implementing a proprietary one.
Upstream-Bug: https://github.com/containers/skopeo/issues/2354
Change-Id: I220e7ce9a17fd230c38882f12c009a166dcc9336
I don't know when this broke, it seems like it happened since the 24.05
upgrade, so xonsh 0.15.
What happened is that xonsh was trying to intercept log output, which
explodes if you have the logger survive past one command input. This is,
however, impossible to avoid if you are trying to use logging when you
import releng from inside xonsh for interactive use!
The error below is because the memory handler backing the stdout/stderr
of the one command that's just been run was closed after the command
completed.
Change-Id: I2be642aebf93da9818d08ff8b97c2e72ba5ac581
--- Logging error ---
Traceback (most recent call last):
File "/nix/store/7hnr99nxrd2aw6lghybqdmkckq60j6l9-python3-3.11.9/lib/python3.11/logging/__init__.py", line 1113, in emit
stream.write(msg + self.terminator)
File "/nix/store/34951j60xcsw6zj4v8lsaf491acv0by3-python3-3.11.9-env/lib/python3.11/site-packages/xonsh/base_shell.py", line 183, in write
self.mem.write(s)
ValueError: I/O operation on closed file.
Call stack:
File "/nix/store/xgdp1p1gv8ni1awnkzyqasnn6gz5wlvx-xonsh-0.15.1/bin/xonsh", line 8, in <module>
sys.exit(main())
File "/nix/store/34951j60xcsw6zj4v8lsaf491acv0by3-python3-3.11.9-env/lib/python3.11/site-packages/xonsh/main.py", line 470, in main
sys.exit(main_xonsh(args))
File "/nix/store/34951j60xcsw6zj4v8lsaf491acv0by3-python3-3.11.9-env/lib/python3.11/site-packages/xonsh/main.py", line 514, in main_xonsh
shell.shell.cmdloop()
File "/nix/store/34951j60xcsw6zj4v8lsaf491acv0by3-python3-3.11.9-env/lib/python3.11/site-packages/xonsh/ptk_shell/shell.py", line 406, in cmd
loop
line = self.singleline(auto_suggest=auto_suggest)
File "/nix/store/34951j60xcsw6zj4v8lsaf491acv0by3-python3-3.11.9-env/lib/python3.11/site-packages/xonsh/ptk_shell/shell.py", line 374, in sin
gleline
line = self.prompter.prompt(**prompt_args)
File "/nix/store/34951j60xcsw6zj4v8lsaf491acv0by3-python3-3.11.9-env/lib/python3.11/site-packages/prompt_toolkit/shortcuts/prompt.py", line 1
026, in prompt
return self.app.run(
File "/nix/store/34951j60xcsw6zj4v8lsaf491acv0by3-python3-3.11.9-env/lib/python3.11/site-packages/prompt_toolkit/application/application.py",
line 1002, in run
return asyncio.run(coro)
File "/nix/store/7hnr99nxrd2aw6lghybqdmkckq60j6l9-python3-3.11.9/lib/python3.11/asyncio/runners.py", line 189, in run
with Runner(debug=debug) as runner:
File "/nix/store/7hnr99nxrd2aw6lghybqdmkckq60j6l9-python3-3.11.9/lib/python3.11/asyncio/runners.py", line 59, in __enter__
self._lazy_init()
File "/nix/store/7hnr99nxrd2aw6lghybqdmkckq60j6l9-python3-3.11.9/lib/python3.11/asyncio/runners.py", line 137, in _lazy_init
self._loop = events.new_event_loop()
File "/nix/store/7hnr99nxrd2aw6lghybqdmkckq60j6l9-python3-3.11.9/lib/python3.11/asyncio/events.py", line 810, in new_event_loop
return get_event_loop_policy().new_event_loop()
File "/nix/store/7hnr99nxrd2aw6lghybqdmkckq60j6l9-python3-3.11.9/lib/python3.11/asyncio/events.py", line 699, in new_event_loop
return self._loop_factory()
File "/nix/store/7hnr99nxrd2aw6lghybqdmkckq60j6l9-python3-3.11.9/lib/python3.11/asyncio/unix_events.py", line 64, in __init__
super().__init__(selector)
File "/nix/store/7hnr99nxrd2aw6lghybqdmkckq60j6l9-python3-3.11.9/lib/python3.11/asyncio/selector_events.py", line 54, in __init__
logger.debug('Using selector: %s', selector.__class__.__name__)
Message: 'Using selector: %s'
Arguments: ('EpollSelector',)
Change-Id: I90959809129aaf96aad4577599031688599ed85e
This is motivated by flakes being bad and all the stuff that calls
things by "system" being utterly unable to cope with cross compilation.
So if we go shove it in package.nix it is suddenly usable from cross
contexts.
Usage:
```
nix build -L .#nix-riscv64-linux.binaryTarball
```
Change-Id: I702ebf2ac5bd9d1c57662f968b000073134df336
It builds. I have not tested the binaries since I don't have hardware,
but I would be rather surprised if it were broken, given that nix *runs*
on this platform.
Change-Id: I0b474ffcd4a431bf117a303d0b65fa6532113f48
There were two bugs I found:
1. If the build isn't already done in the store, nix-store --realise
does not know how to build it. You have to just give it the
derivation and I guess it will realise all outputs, which is fine.
2. cp without -T will not overwrite an existing manual directory,
creating a path manual/manual.
Change-Id: Ibebfd136a266da5330944a985e636ebb776f1909
This seems to have been caused by having the wrong PID. I don't know why
it worked before in the sandbox, but the code was definitely wrong
before, so let's just fix it.
Change-Id: I556580bdf614c716566310e975a36daa6d6c9a91
This was originally going to be just the testsuite but I kinda just
documented all of them.
I am tired of us not documenting these. This is a starting point to
producing an actually good index. I would like to enforce it in a
pre-commit hook eventually that we document all environment variables
used in Lix itself, even if it is terse dev facing docs.
This is full of a bunch of TODOs caused by auditing code. They should
probably be done at some point.
Change-Id: I7c0d3b257e19bae23d47d1efbd7361d203bccb0e
It's in the security section, and it was totally outdated anyway.
I took the opportunity to write down the stuff we already believed.
Change-Id: I73e62ae85a82dad13ef846e31f377c3efce13cb0
Followup to https://gerrit.lix.systems/c/lix/+/1417 to ensure that this
parser will never take something that doesn't look like a version.
It turns out this problem is less alarming than initially thought
because it only applies to the testsuite in a non-default mode.
Change-Id: I26aba24aaf0215f2b782966314b94784db766266
We should not let these regress in CI by having broken dependencies or
similar. Still need to fix the evaluation error checking in
buildbot-nix, but this is a useful step regardless.
Fixes: lix-project/lix#383
Change-Id: I3883184165440e66256c989117f2ab2e54c3aafd
-- message from cl/1418 --
The boehmgc changes are bundled into this commit because doing otherwise
would require an annoying dance of "adding compatibility for < 8.2.6 and
>= 8.2.6" then updating the pin then removing the (now unneeded)
compatibility. It doesn't seem worth the trouble to me given the low
complexity of said changes.
Rebased coroutine-sp-fallback.diff patch taken from https://github.com/NixOS/nixpkgs/pull/317227
-- jade resubmit changes --
This is a resubmission of https://gerrit.lix.systems/c/lix/+/1418, which
was reverted in https://gerrit.lix.systems/c/lix/+/1432 for breaking CI
evaluation without being detected.
I have run `nix flake check -Lv` on this one before submission and it
passes on my machine and crucially without eval errors, so the CI result
should be accurate.
It seems like someone renamed forbiddenDependenciesRegex to
forbiddenDependenciesRegexes in nixpkgs and also changed the type
incompatibly. That's pretty silly, but at least it's just an eval error.
Also, `xonsh` regressed the availability of `xonsh-unwrapped`, but it
was fixed by us in https://github.com/NixOS/nixpkgs/pull/317636, which
is now in our channel, so we update nixpkgs compared to the original
iteration of this to simply get that.
We originally had a regression related to some reorganization of the
nixpkgs lib test suite in which there was broken parameter passing.
This, too, we got quickfixed in nixpkgs, so we don't need any changes
for it: https://github.com/NixOS/nixpkgs/pull/317772
Related: https://gerrit.lix.systems/c/lix/+/1428
Fixes: lix-project/lix#385
Change-Id: I26d41ea826fec900ebcad0f82a727feb6bcd28f3
The libcmd unit test creates files (more specifically, the fetcher cache) in
its home directory. In the single-user sandbox, this leads to the creation of
/homeless-shelter, since this is the default HOME and the root is writable.
Unfortunately, this conflicts with the assumption of the functional tests that
this directory does not exist. Use a different home directory to prevent these
test failures, and thus restore the ability to build inside the single-user
sandbox.
Fixes: lix-project/lix#365
Change-Id: I4df8c53d043234b95a7c0ac45fc5ee89e8d46aff
* changes:
releng: add prod environment, ready for release
releng: automatically figure out if we should tag latest for docker
releng: support multiarch docker images
manual: rewrite the docker guide now that we have images
Rewrite docker to be sensible and smaller
Implement docker upload in the releng tools
I am *reasonably* confident that this releng infrastructure can actually
build a Lix 2.90 and release it successfully. Let's make it possible to
do, and add some cute colours to the confirmation message.
Change-Id: I85e498b6fb49ffc5e75c0a72c5e45fb1f69030d3
For example, when releasing from release-2.90, if `main` has a 2.91 tag
ancestor, we know that 2.91 was released, so we should *not* tag latest.
Change-Id: Ia56b17a2ee03bbec74b7c271c742858c690d450d
If we don't want to have separate registry tags by architecture (EWWWW),
we need to be able to build multiarch docker images. This is pretty
simple, and just requires making a manifest pointing to each of the
component images.
I was *going* to just do this API prodding with manifest-tool, but it
doesn't support putting metadata on the outer manifest, which is
actually kind of a problem because it then doesn't render the metadata
on github. So I guess we get a simple little containers API
implementation that is 90% auth code.
Change-Id: I8bdd118d4cbc13b23224f2fb174b232432686bea
I have checked the image can build things and inspected `diff -ru`
compared to the old image. As far as I can tell it is more or less
the same besides the later git change.
Layers are now 65MB or less, and we aren't against the maxLayers limit
for the broken automatic layering to do anything but shove one store
path in a layer (which is good behaviour, actually).
This uses nix2container which streams images, so the build time is much
shorter.
I have also taken the opportunity to, in addition to fixing the 400MB
single layer (terrible, and what motivated this in the first place),
delete about 200MB of closure size inflicted by git vs gitMinimal
causing both perl and python to get into closure.
People mostly use this thing for CI, so I don't really think you need
advanced git operations, and large git can be added at the user side if
really motivated.
With love for whichever container developer somewhat ironically assumed
that one would not run skopeo in a minimal container that doesn't have a
/var/tmp.
Fixes: lix-project/lix#378
Change-Id: Icc3aa20e64446276716fbbb87535fd5b50628010
The boehmgc changes are bundled into this commit because doing otherwise
would require an annoying dance of "adding compatibility for < 8.2.6 and
>= 8.2.6" then updating the pin then removing the (now unneeded)
compatibility. It doesn't seem worth the trouble to me given the low
complexity of said changes.
Rebased coroutine-sp-fallback.diff patch taken from https://github.com/NixOS/nixpkgs/pull/317227
Change-Id: I8c590e9fe25c0f566d0cfeacb96d8cf50abf12e8
4b128008c5d9fde881ce1b0a25e60ae0415a14d5 in nixpkgs introduced a default
hashedPasswordFile for root in NixOS tests, which takes precedence over
the password option set in the nix-copy test.
Change-Id: Iffaebec5992e50614b854033f0d14312c8d275b5
Since ad8a4b380e, the version printer returns "nix (Lix, like Nix) 2.x",
hence the `daemonVersion` was being set to the string "like".
Using `compareVersions` with a letter compares them lexicographically:
builtins.compareVersions "like" "2.12pre20230103" // => -1
builtins.compareVersions "like" "2.16.0" // => -1
This caused that `isDaemonNewer` always returned 1, falsy in Bash terms.
Therefore, the test suite skipped those tests where they use it.
Fixes lix-project/lix#324
Change-Id: If6682515bf0bf8b8add641af9a4e98b50a9acb51
This can release x86_64-linux binaries to staging, with ephemeral keys.
I think it's good enough to review at least at this point, so we don't
keep adding more stuff to it to make it harder to review.
Change-Id: Ie95e8f35d1252f5d014e819566f170b30eda152e
We realized that there's really no good place to put these dev facing
bulletins, and the user-facing release notes aren't really the worst
place to put them, I guess, and we do kind of hope that it converts
users to devs.
Change-Id: Id9387b2964fe291cb5a3f74ad6344157f19b540c
clangd seems to break if GCC is using precompiled headers for C++'s
standard library, so this sets -Denable-pch-std=${stdenv.cc.isClang}
Fixes#374.
Change-Id: Ic4be41ebe7576ebcb9c208275596f953c2003109
They are enabled by default, and Meson will also prints whether or not
they're enabled at the bottom at the end of configuration.
Change-Id: I48db238510bf9e74340b86f243f4bbe360794281
Fixes a compiler error that looks like:
error: could not convert '[...]' from 'future<void>' to 'future<nix::FileTransferResult>'
Change-Id: I4aeadfeba0dadfdf133f25e6abce90ede7a86ca6
In most real world cases, the Link header is set on the redirect, not on
the final file. This regressed in Lix earlier and while new unit tests
were added to cover it, this integration test should probably have also
caught it.
Change-Id: I2a9d8d952fff36f2c22cfd751451c2b523f7045c
This reverts commit d0390b5cf2.
Other parts of the codebase will need to be adjusted in response to a
default verbosity change. Let's just push this to after 2.90.
Fixes#362.
Fixes#367.
Change-Id: I04648473579146851bda41d764adc1ef954c355d
Here's my guide so far:
$ rg '((?!(recursive).*) Nix
(?!(daemon|store|expression|Rocks!|Packages|language|derivation|archive|account|user|sandbox|flake).*))'
-g '!doc/' --pcre2
All items from this query have been tackled. For the documentation side:
that's for lix-project/lix#162.
Additionally, all remaining references to github.com/NixOS/nix which
were not relevant were also replaced.
Fixes: lix-project/lix#148.
Fixes: lix-project/lix#162.
Change-Id: Ib3451fae5cb8ab8cd9ac9e4e4551284ee6794545
Signed-off-by: Raito Bezarius <raito@lix.systems>
This causes libstore, libexpr, libfetchers, and libutil to be linked
with -Wl,--whole-archive to executables, when building statically.
libstore for the store backends, libexpr for the primops, libfetchers
for the fetcher backends I assume(?), and libutil for the nix::logger
initializer (which notably shows in pre-main constructors when HOME is
not owned by the user. cursed.).
This workaround should be removed when #359 is fixed.
Fixes#306.
Change-Id: Ie9ef0154e09a6ed97920ee8ab23810ca5e2de84c
Fixes: lix-project/lix#157
Fixes: lix-project/lix#221
Previously the entire escaped store URI was included. This would cause
build failures if a very long or deeply nested path was being used in
the store.
Now, we use the first 48 characters of the URL (escaped), then 16 bytes
of hash of the entire URL. This should never collide and limits the
length of the file name to a bit over 64, which is fine.
Change-Id: Ic1ba690a94e83749567c2c29460b8d1bcf2ac413
This is because a dynamic_cast<nix::RootArgs *> of a (n-e-j) MyArgs
returns nullptr even though MyArgs has virtual nix::RootArgs as a
parent.
class MyArgs : virtual public nix::MixEvalArgs,
virtual public nix::MixCommonArgs,
virtual nix::RootArgs { ... };
So this should work right?? But it does not. We found out that it's
caused by -fvisibility=hidden in n-e-j, but honestly this code was bad
anyway.
The trivial solution is to simply stop relying on RTTI working properly
here, which is probably better OO architecture anyway. However, I am not
100% confident *this* is sound, since we have this horrible hierarchy:
Args (defines getRoot)
/ | \
RootArgs MixCommonArgs MixEvalArgs
(overrides)
I am not confident that this is guaranteed to resolve from Args always
in the case of this override.
Assertion failed: (res), function getRoot, file src/libutil/args.cc, line 67.
6MyArgsProcess 60503 stopped
* thread #1, queue = 'com.apple.main-thread', stop reason = hit program assert
frame #4: 0x0000000100b1a41c liblixutil.dylib`nix::Args::processArgs(std::__1::list<std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char>>, std::__1::allocator<std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char>>>> const&, bool) [inlined] nix::Args::getRoot(this=0x00000001000d0688) at args.cc:67:5 [opt]
64 std::cout << typeid(*p).name();
65
66 auto * res = dynamic_cast<RootArgs *>(p);
-> 67 assert(res);
68 return *res;
69 }
70
Target 0: (nix-eval-jobs) stopped.
(lldb) p this
(MyArgs *) 0x00000001000d0688
(lldb) p *this
(nix::Args) {
longFlags = size=180 { ... }
shortFlags = size=4 { ... }
expectedArgs = size=1 { ... }
processedArgs = size=0 {}
hiddenCategories = size=1 {
[0] = "Options to override configuration settings"
}
parent = nullptr
}
We also found that if we did this:
class [[gnu::visibility("default")]] RootArgs : virtual public Args
it would work properly (???!). This is of course, very strange, because
objdump -Ct output on liblixexpr.dylib is identical both with and
without it.
Possibly related: https://www.qt.io/blog/quality-assurance/one-way-dynamic_cast-across-library-boundaries-can-fail-and-how-to-fix-it
Fixes: lix-project/nix-eval-jobs#2
Change-Id: I6b9ed968ed56420a9c4d2dffd18999d78c2761bd
It seems like someone implemented precompiled headers a long time ago
and then it never got ported to meson or maybe didn't work at all.
This is, however, blessedly easy to simply implement. I went looking for
`#define` that could affect the result of precompiling the headers, and
as far as I can tell we aren't doing any of that, so this should truly
just be free build time savings.
Previous state:
Compilation (551 times):
Parsing (frontend): 1302.1 s
Codegen & opts (backend): 956.3 s
New state:
**** Time summary:
Compilation (567 times):
Parsing (frontend): 1123.0 s
Codegen & opts (backend): 1078.1 s
I wonder if the "regression" in codegen time is just doing the PCH
operation a few times, because meson does it per-target.
Change-Id: I664366b8069bab4851308b3a7571bea97ac64022
Before:
$ nix flake lock --override-input nixpkgs gitlab:simple-nixos-mailserver/nixos-mailserver/nonexistent
fetching git input 'git+file:///home/linus/projects/lix'
fetching gitlab input 'gitlab:simple-nixos-mailserver/nixos-mailserver/nonexistent'
error: [json.exception.type_error.302] type must be string, but is null
After:
$ outputs/out/bin/nix flake lock --override-input nixpkgs gitlab:simple-nixos-mailserver/nixos-mailserver/nonexistent
fetching git input 'git+file:///home/linus/projects/lix'
fetching gitlab input 'gitlab:simple-nixos-mailserver/nixos-mailserver/nonexistent'
error:
… while updating the lock file of flake 'git+file:///home/linus/projects/lix?ref=refs/heads/fix-gitlab-nonexistent&rev=915f16a619a36237a099b9aa9afed6d14ff613b4'
… while updating the flake input 'nixpkgs'
… while fetching the input 'gitlab:simple-nixos-mailserver/nixos-mailserver/nonexistent'
error: No commits returned by GitLab API -- does the ref really exist?
Change-Id: Id9bc79d98348500e152ed519bb3ac79a3d15c38d
This reverts commit 285bc67318.
Reason for revert: lix-project/lix#364
For some reason this broke `main` even though the change we are reverting passed CI! Mysterious, haunted, etc. Needs more debugging, let's turn it off for now.
Change-Id: Ica4819d61cd35b83eb52985bfcb657e858f025a9
If our shellHook is being run from a nested nix-shell (see 7a12bc200¹),
then (I think) it is run from a bash function due to the nesting, then
`return` is correct. If its `eval`'d though, then there isn't really a
correct way to early exit. So we can just unconditionally be executed in
a function.
Basically, we have IIFE at home.
[1]: 7a12bc2007
Change-Id: Iacad25cbbf66cde2911604e6061e56ad6212af7e
We reviewed this code a while ago, and we neglected to get a comment in
saying why it's Like This at the time. Let's fix that, since it is code
that looks very absurd at first glance.
Change-Id: Ib67b49605ef9ef1c84ecda1db16be74fc9105398
* changes:
util.hh: Delete remaining file and clean up headers
util.hh: Move nativeSystem to local-derivation-goal.cc
util.hh: Move stuff to types.hh
util.cc: Delete remaining file
util.{hh,cc}: Move ignoreException to error.{hh,cc}
util.{hh,cc}: Split out namespaces.{hh,cc}
util.{hh,cc}: Split out users.{hh,cc}
util.{hh,cc}: Split out strings.{hh,cc}
util.{hh,cc}: Split out unix-domain-socket.{hh,cc}
util.{hh,cc}: Split out child.{hh,cc}
util.{hh,cc}: Split out current-process.{hh,cc}
util.{hh,cc}: Split out processes.{hh,cc}
util.{hh,cc}: Split out file-descriptor.{hh,cc}
util.{hh,cc}: Split out file-system.{hh,cc}
util.{hh,cc}: Split out terminal.{hh,cc}
util.{hh,cc}: Split out environment-variables.{hh,cc}
Folding by default would prevent things like "Ctrl+F for nix-env" from
working trivially, but the user should be able to fold if they want to.
Change-Id: I5273272289f0f24e1f040c691580acfe33f66bd4
while refactoring the curl wrapper we inadvertently broken the immutable
flake protocol, because the immutable flake protocol accumulates headers
across the entire redirect chain instead of using only the headers given
in the final response of the chain. this is a problem because Some Known
Providers Of Flake Infrastructure set rel=immutable link headers only in
the penultimate entry of the redirect chain, and curl does not regard it
as worth returning to us via its response header enumeration mechanisms.
fixes lix-project/lix#358
Change-Id: I645c3932b465cde848bd6a3565925a1e3cbcdda0
Documents some of the weirdness of __curPos and the or keyword.
This does not fit well into any existing section for either of
them, though the use of or as a quasi-operator is mentioned in
the section on operators.
Addresses lix-project/lix#353
Change-Id: I7c906c8368843dca6944e8b22573b6d201cd9a76
grepQuietInvert is a typo introduced by c11836126b.
The test functional-timeout was failing silently because Bash considered
the command-not-found error as truthy.
Change-Id: Ic13829d02ec55d6ecd63a0f4d34ec0d32379609f
If a nested nix-shell is run inside a nix-shell, then the outer shell's
shellHook will be passed through and run again, unless the nested shell
defines its own.
With lix's hook, this can be annoying: forgetting to exit its nix-shell,
cd'ing to another repository & entering a nested nix-shell will happily
install lix's pre-commit hook in it.
This change makes lix's hook return early in such cases.
Change-Id: I91cb6eb6668f3a8eace36ecbdb01eb367861d77b
According to doc/manual/src/contributing/hacking.md, all development
shells should also be available in classic nix using the -A argument
to nix-shell, e.g.
nix-shell -A native-clangStdenvPackages
This was not actually the case; flake-compat generates attrsets like
nix-shell -A devShells.x86_64-linux.native-clangStdenvPackages
instead. These are unwieldy to use, so rather than changing the docs,
this changes the shell.nix file to result in the documented behavior.
Change-Id: I0920ccbdfddacf371f0aeaae7e290db65cf76ee7
check goals for timeouts first, and their activity fds only if no
timeout has occurred. checking for timeouts *after* activity sets
us up for assertion failures by running multiple build completion
notifiers, the first of which will kill/reap the the goal process
and consuming the Pid instance. when the second notifier attempts
to do the same it will core dump with an assertion failure in Pid
and take down not only the single goal, but the entire daemon and
all goals it was building. luckily this is rare in practice since
it requires a build to both finish and time out at the same time.
writing a test for this is not feasible due to how much it relies
on scheduling to actually trigger the underlying bug, but on idle
machines it can usually be triggered by running multiple sleeping
builds with timeout set to the sleep duration and `--keep-going`:
nix-build --timeout 10 --builders '' --keep-going -E '
with import <nixpkgs> {};
builtins.genList
(i: runCommand "foo-${toString i}" {} "sleep 10")
100
'
Change-Id: I394d36b2e5ffb909cf8a19977d569bbdb71cb67b
8c06b7b43¹ made libfetchers log the URL being fetched just before the
actual fetch, particularly in case something freezes. This used the base
URL, to not include query parameters, as the Nixpkgs lib tests assume
that stderr logs will be equal across shallow and non-shallow git
fetches (and shallow fetches have the ?shallow=1 query parameter).
8c06b7b43 assumed that the `base` field of ParsedURL would be populated,
as the comment simply says "URL without query/fragment"... but
apparently it is not populated when the URL being fetched is *already*
fetched, which caused libfetchers to log things like
fetching gitlab input ''
which is. silly. but you know, busted lix be busted.
Anyway, with this commit we just remove the query params before printing
instead, which seems to do the right thing
[1]: 8c06b7b431
Change-Id: I9b9988992029aa6abef786f20b66e68c2ebb97d4
The `builder` local variable and duplicate `args.push_back` are no
longer required since the Darwin sandbox stopped using `sandbox-exec`.
The `drv->isBuiltin` check is not required either, as args are not
accessed when the builder is builtin.
Change-Id: I80b939bbd6f727b01793809921810ff09b579d54
Seccomp filtering and the no-new-privileges functionality improve the security
of the sandbox, and have been enabled by default for a long time. In
lix-project/lix#265 it was decided that they
should be enabled unconditionally. Accordingly, remove the allow-new-privileges
(which had weird behavior anyway) and filter-syscall settings, and force the
security features on. Syscall filtering can still be enabled at build time to
support building on architectures libseccomp doesn't support.
Change-Id: Iedbfa18d720ae557dee07a24f69b2520f30119cb
`meson test` refuses to let `--verbose` (which shows the entire
invocation and stdio) override `--quiet`, but if neither are specified
in the justfile then you can use either `just test -q` or `just test -v`
Change-Id: I449e13084ce64666b7ee2ab4280818782fb8185a
Embarrassingly, I submitted a CL overriding submit requirements since
I thought it was spurious failures. However, the CI failure was in fact
real, and I have hopefully learned my lesson. The CI failure is that:
```
vm-test-run-nix-upgrade-nix> machine # installing 'nix-2.18.1'
vm-test-run-nix-upgrade-nix> machine # building '/nix/store/2b6fdf7wvahd00bg2ff0393bhd597a0h-user-environment.drv'...
vm-test-run-nix-upgrade-nix> machine # error: Unable to build profile. There is a conflict for the following files:
vm-test-run-nix-upgrade-nix> machine #
vm-test-run-nix-upgrade-nix> machine # /nix/store/dn6mhhr92bh3ad0n4pd1538ww88khjii-nix-2.18.1/lib/libboost_context.so
vm-test-run-nix-upgrade-nix> machine # /nix/store/w4vffn9iq0znk8bcg5i2giij90xy6db6-lix-2.90.0pre20240523_c97e171/lib/libboost_context.so
vm-test-run-nix-upgrade-nix> machine # error: builder for '/nix/store/2b6fdf7wvahd00bg2ff0393bhd597a0h-user-environment.drv' failed with exit code 1
vm-test-run-nix-upgrade-nix> machine # error: program '/nix/store/w4vffn9iq0znk8bcg5i2giij90xy6db6-lix-2.90.0pre20240523_c97e171/bin/nix-env' failed with exit code 100
```
This is definitely caused by the pname not being the same, so we had
better revert that part of the change until we know we won't regress
anything by doing this.
Fixes: https://gerrit.lix.systems/c/lix/+/1152/5
Change-Id: I0e9d573987f2819c106fb7cea87410fa75152274
* changes:
docs: linkify nix3-build mention in nix-build.md
build: make internal-api-docs PHONY
cleanup lookupFileArg
add docstring to lookupFileArg
add libcmd test for lookupFileArg
This breaks downstreams linking to us on purpose to make sure that if
someone is linking to Lix they're doing it on purpose and crucially not
mixing up Nix and Lix versions in compatibility code.
We still need to fix the internal includes to follow the same schema so
we can drop the single-level include system entirely. However, this
requires a little more effort.
This adds pkg-config for libfetchers and config.h.
Migration path:
expr.hh -> lix/libexpr/expr.hh
nix/config.h -> lix/config.h
To apply this migration automatically, remove all `<nix/>` from
includes, so: `#include <nix/expr.hh>` -> `#include <expr.hh>`. Then,
the correct paths will be resolved from the tangled mess, and the
clang-tidy automated fix will work.
Then run the following for out of tree projects:
```
lix_root=$HOME/lix
(cd $lix_root/clang-tidy && nix develop -c 'meson setup build && ninja -C build')
run-clang-tidy -checks='-*,lix-fixincludes' -load=$lix_root/clang-tidy/build/liblix-clang-tidy.so -p build/ -fix src
```
Related: lix-project/nix-eval-jobs#5
Fixes: lix-project/lix#279
Change-Id: I7498e903afa6850a731ef8ce77a70da6b2b46966
Since we're skipping Meson's dependency tracking, for the
internal-api-docs custom target, we should just consider it a phony
target and build it on every request.
Change-Id: I3b0bcea30ee9a4830023ccc5bededf995e96cccc
this should make it easier to spot future instances of entries being
duplicated by accident. also add a pre-commit check to remain sorted
Change-Id: I500caf862e93480b38c9d51144273bb2dcab1af0
File not found while importing causes a SysError, not an EvalError,
which is not currently caught by the tab-completion handler. Ignoring
all SysErrors might seem "dangerous" but this is the tab-completion
handler, any exception being bubbled up from there causes unexpected
behavior (causes the whole repl to exit).
Fixes#340.
Change-Id: I643048a47935e77f582decc539d9e51bdb96c890
nixpkgs has 23000 attributes, and our previous limit would be hit if you
have more than one nixpkgs in the environment, for example, because
`repl-overlays` will load the new stuff from the environment on top of
the existing environment.
This is not really testable since if we did write such a test, it would
just be testing this constant tbh...
Fixes: lix-project/lix#337
Change-Id: I49197bfb4db55b082f914f0d70e84f5f5f110954
Also fix typos introduced by the commits I read.
I have run the addDrvOutputDependencies release note past Ericson since
I was confused by what the heck it was doing, and he was saying it was
reasonable.
Change-Id: Id015353b00938682f7faae7de43df7f991a5237e
nix::fetchers::CacheImpl uses $XDG_CACHE_HOME, or its default based on
$HOME, to store its SQLite database. If the current process can't write
to that directory for whatever reason, though, any eval-time fetching
would fail just initializing the cache.
With this change, IO errors initializing the fetcher cache are logged
but ignored, and nix::fetchers::CacheImpl falls back to an in-memory¹
database instead.
Notably, this will fix any uses eval fetching while Lix itself is being
run in a derivation builder (such as during tests), as the derivation
builder does not set $XDG_CACHE_HOME, and sets $HOME to the non-existent
directory /homeless-shelter.
Before:
$ env -u XDG_CACHE_HOME HOME=/homeless-shelter nix -Lv eval --impure -E 'fetchTarball "https://git.lix.systems/lix-project/lix/archive/main.tar.gz"'
error:
… while calling the 'fetchTarball' builtin
at «string»:1:1:
1| fetchTarball "https://git.lix.systems/lix-project/lix/archive/main.tar.gz"
| ^
error: creating directory '/homeless-shelter': Permission denied
After:
$ env -u XDG_CACHE_HOME HOME=/homeless-shelter nix -Lv eval --impure -E 'fetchTarball "https://git.lix.systems/lix-project/lix/archive/main.tar.gz"'
warning: ignoring error initializing Lix fetcher cache: error: creating directory '/homeless-shelter': Permission denied
"/nix/store/s9lxdnn0awp37n560bg4fgr497ah4hvw-source"
¹: https://www.sqlite.org/inmemorydb.html
Change-Id: I15c38c9baaf215fc6e192b8a4c70b9692a69bc22
This turns errors like:
error: flake output attribute 'hydraJobs' is not a derivation or path
into errors like:
error: expected flake output attribute 'hydraJobs' to be a derivation or
path but found a set: { binaryTarball = «thunk»; build = «thunk»; etc> }
This change affects all InstallableFlake commands.
Change-Id: I899757af418b6f98201006ec6ee13a448c07077c
Passing the commit message as an argument causes update failures on repositories with
lots of flake inputs. In some cases, the commit message is over 250,000 bytes.
Upstream PR: https://github.com/NixOS/nix/pull/10686
(cherry picked from commit 8b5e8f4fba5728f2b3e90fcd1ab15df77e3ea0e8)
Change-Id: I2c196a21cc9bedc24d57a828a0c5b9467e072f76
Move the identical static `chmod_` functions in libstore to
libutil. the function is called `chmodPath` instead of `chmod`
as otherwise it will shadow the standard library chmod in the nix
namespace, which is somewhat confusing.
Change-Id: I7b5ce379c6c602e3d3a1bbc49dbb70b1ae8f7bad
2bbe3efd1¹ added the -Wdeprecated-copy warning, and fixed the instances
of it which GCC warned about, in HintFmt and ref<T>. However, when
building with Clang, there is an additional deprecated-copy warning in
BaseError. This commit explicitly defaults the copy assignment operator
for BaseError and silences this warning.
1: 2bbe3efd16
Change-Id: I50aa4a7ab1a7aae5d7b31f765994abd3db06379d
Fate has something different in store for the release process,
backporting process and the general maintainer documentation.
See lix-project/lix#260.
Change-Id: I626686ff4059aee22a3ab1664b52581b2dbf6ed7
Signed-off-by: Raito Bezarius <raito@lix.systems>
having the serializer write into `*conn` is not legal because we are
in a sinkToSource that will be drained by the remote we're connected
to. writing into `*conn` directly can break the framing protocol. it
is unlikely this code was ever run: to protocol it caters to is from
2016(!) and thoroughly untested in-tree, and since it's been present
since nix 2.17 and the 1.18 protocol broken here is nix 2.0 we might
safely assume that daemons older than nix 2.1 are no longer used now
see also #325 (though that wants <2.3 gone, this is sadly only <2.1)
Change-Id: I9d674c18f6d802f61c5d85dfd9608587b73e70a5
On several occasions I've found myself confused when trying to delete
a store path, because I am told it's still alive, but
nix-store --query --roots doesn't show anything. Let's save future
users this confusion by mentioning that a path might be alive due to
having referrers, not just roots.
(cherry picked from commit 979a019014569eee7d0071605f6ff500b544f6ac)
Upstream-PR: https://github.com/NixOS/nix/pull/10733
Change-Id: I54ae839a85f3de3393493fba27fd40d7d3af0516
These commands outputs data that may not end with a newline. This
causes problems when the progress bar redraws, as that completely
wipes the last line of output. As nix key generate-secret outputs
a single line of text with no output, it shows up entirely blank,
making it look like nothing happened.
Fixes: lix-project/lix#320
Change-Id: I5ac706d71d839b6dfa760b60a351414cd96297cf
Fixes#183, #110, #116.
The default flake-registry option becomes 'vendored', and refers
to a vendored flake-registry.json file in the install path.
Vendored copy of the flake-registry is from github:NixOS/flake-registry
at commit 9c69f7bd2363e71fe5cd7f608113290c7614dcdd.
Change-Id: I752b81c85ebeaab4e582ac01c239d69d65580f37
This should have been in there originally, which is our mistake,
considering that debugging CI failures is basically impossible without
it.
Change-Id: I4ab8799e6e0abca1984ed9801fe10c58200861a3
We don't need bear anymore, since we don't have any more bad build
systems that lack compile commands generation inside Lix.
Change-Id: I7809ddfd993180468f846e8cd862bdd54d5b31ec
Both of these still needs their own actual documentation, but they are
at least now mentioned that they exist and what they're enabled by.
Change-Id: I235b9e8e627e04ed06611423c8e67a8eca233120
Example: /nix/store/dr53sp25hyfsnzjpm8mh3r3y36vrw3ng-neovim-0.9.5^out
This is nonsensical since selecting outputs can only be done for a
buildable derivation, not for a realised store path. The build worker
side of things ends up crashing with an assertion when trying to handle
such malformed paths.
Change-Id: Ia3587c71fe3da5bea45d4e506e1be4dd62291ddf
This builtin was always a problem and nixpkgs uses it in exactly one
place, to give up if the Nix version is absurdly old. It has no other
use cases, and doesn't work in a multi-implementation world anyway.
Change-Id: I03c36e118591029e2ef14b091fe14a311c66a08a
There are a few places in nixpkgs lib where `**Foo**:` is used as a heading instead of the usual markdown `# Foo` ones. I think this is intentional with how it gets rendered in the manual, e.g. [`lib.lists.sortOn`][1].
[1]: https://nixos.org/manual/nixpkgs/stable/#function-library-lib.lists.sortOn
`nix-doc` prints this as
```
*Laws**:
```nix
sortOn f == sort (p: q: f p < f q)
```
```
chomping off the first asterisk as part of `cleanup_single_line` that's meant to deal with `/** \n * \n * \n */` style doc comments. This also means the usage in lix ends up funny-looking with a trailing asterisk as if there's a footnote to pay attention to (which is how I first noticed it, heh)
The fix:
When cleaning up a single line and removing a prefix comment character,
ensure it's followed by whitespace (or the last character of the line).
Upstream-PR: https://github.com/lf-/nix-doc/pull/26
Change-Id: If2870c53a632f6bbbcca98a4bfbd72f5bef37879
Surely if you have unreleased changes you want them on a page right?
`officialRelease` means "this is a *release version*", which is a
reasonable case to not want it, but we are not that here.
I understand wanting to be able to turn it off for deps reasons or
something, but other than that, uhh, seems better to just turn it on
always; it is basically free compute-wise to the point we run it on
pre-commit.
Part two of fixing lix#297.
Fixes: lix-project/lix#297
Change-Id: I0f8dd1ae42458df371aef529c456e47a7ac04ae0
This allows us to have links to peoples' GitHub and Forgejo profiles.
I used YAML because I don't want to introduce a dependency on having a
working Nix evaluator to be able to build release notes, and we already
have a YAML parser in this script.
Change-Id: Idf2813f79e0407460c796cba6c383496465e152d
This does not add missing release notes, and it doesn't do anything
about the profiles feature we would really like to have so we can have
consistent credit.
Change-Id: I72a6f7acfcff85f380be17dac76501a6f4693776
This was a combination of two problems: the python didn't throw an error
because apparently glob on a nonexistent directory doesn't crash, and
secondarily, bash ignores bad exit codes without `set -e` if they are
not in the final/only command.
Change-Id: I812bde7a4daee5c77ffe9d7c73a25fd14969f548
Use the correct directory for the rl-next build, so that the release notes
actually get built and the page doesn't end up empty. I don't know why the
exception didn't cause a build failure before.
Fixes: lix-project/lix#297
Change-Id: Ic72b9bb4c0d2d1f633f2af90cce4a3a2796d7f9b
Basically I'd expect the same behavior as with `nix-build`, i.e.
with `--keep-going` the hash-mismatch error of each failing
fixed-output derivation is shown.
The approach is derived from `Store::buildPaths` (`entry-point.cc`):
instead of throwing the first build-result, check if there are any build
errors and if so, display all of them and throw after that.
Unfortunately, the BuildResult struct doesn't have an `ErrorInfo`
(there's a FIXME for that at least), so I have to construct my own here.
This is a rather cheap bugfix and I decided against touching too many
parts of libstore for that (also I don't know if that's in line with the
ongoing refactoring work).
Closes lix-project/lix#302
Change-Id: I378ab984fa271e6808c6897c45e0f070eb4c6fac
Now, we can credit folks for their work.
The credit generator is very basic, we probably want a database of
profiles and link to their preferred page or something.
Change-Id: Ida81905750371e5e125d0ce7e554d0526265cf8e
Co-Authored-By: Jade Lovelace <lix@jade.fyi>
Signed-off-by: Raito Bezarius <raito@lix.systems>
This is not like, perfect, since it is a manual operation, but we can
automate it in the future. rclone is used, since it seems like awscli is
not (obviously at least?) able to sync directories such that old things
are deleted, and rclone does this thing properly.
Fixes: lix-project/meta#2
Change-Id: Ia6a46d861342a6d29b22f981ba4e35e79f79e60e
Otherwise, it will be thrown again during exit when the repl is terminated by
end-of-input after the last command was interrupted.
Change-Id: I8456c47bc36cfb0892efdad5420f318f7e6526d5
The interrupt-blocking code was originally introduced 20 years ago so that
trying to log an error message does not result in an interrupt exception being
thrown and then going unhandled (c8d3882cdc).
However, the logging code does not check for interrupts any more
(054be50257), so this reasoning is no longer
applicable. Delete this code so that later interrupts are unblocked again, for
example in the next line entered into the repl.
Closes: lix-project/lix#296
Change-Id: I48253f5f4272e75001148c13046e709ef5427fbd
Very basic behavior test to ensure that gzip data gets internally
decompressed by the file transfer pipeline.
Change a std::string_view return value in the test harness to
std::string. I wouldn't call myself a C++ beginner and I still managed
to shoot myself in the foot like three times with the lifetime
managements there (e.g. [&] { return an_std_string; } ends up with a
dangling string_view!).
Change-Id: I1360750d4181ce1ca2a3aa4dc0e97e131351c469
it's no longer used. it really shouldn't have existed this long since it
was just a mashup of both std::promise and std::packaged_task in a shape
that makes composition unnecessarily difficult. all but a single case of
Callback pattern calls were fully synchronous anyway, and even this sole
outlier was by far not important enough to justify the extra complexity.
Change-Id: I208aec4572bf2501cdbd0f331f27d505fca3a62f
also add a few more tests for exception propagation behavior. using
packaged_tasks and futures (which only allow a single call to a few
of their methods) introduces error paths that weren't there before.
Change-Id: I42ca5236f156fefec17df972f6e9be45989cf805
this is the *only* real user of file transfer download completion
callbacks, and a pretty spurious user at that (seeing how nothing
here is even turned on by default and indeed a dependency of path
substitution which *isn't* async, and concurrency-limited). it'll
be a real pain to keep this around, and realistically it would be
a lot better to overhaul substitution in general to be *actually*
async. that requires a proper async framework footing though, and
we don't have anything of the sort, but it's also blocking *that*
Change-Id: I1bf671f217c654a67377087607bf608728cbfc83
The fix for the Darwin vulnerability in ecdbc3b207
also broke setting `__sandboxProfile` when `sandbox=relaxed` or
`sandbox=false`. This cppnix change fixes `sandbox=relaxed` and
adds a suitable test.
Co-Authored-By: Artemis Tosini <lix@artem.ist>
Co-Authored-By: Eelco Dolstra <edolstra@gmail.com>
Change-Id: I40190f44f3e1d61846df1c7b89677c20a1488522
In commit 946fc12e4e, the progress bar in the
repl was disabled again because it was observed to erase incremental output
from attrset evaluations from the terminal. Let's try adding the progress bar
again, this time showing up only when a build is initiated, which does not have
incremental output that could be destroyed to begin with. While this does mean
that we won't have a progress bar for eval-time fetching or IFD, it's still
better than nothing.
Change-Id: If4eb1035cd0c876f5b4ff1e2434b9baf99f150ac
Now instead of a derivation overridden from Lix, we use a mkShell
derivation parameterized on an already called package.nix. This also
lets callPackage take care of the buildPackages distinction for the
devShell.
Change-Id: I5ddfec40d83fa6136032da7606fe6d3d5014ef42
* changes:
flake: fix devShell on i686-linux by disabling ClangBuildAnalyzer on it
flake: fix eval of checks & devshell on i686-linux
flake: move the pre-commit definition to its own file
ClangBuildAnalyzer doesn't build on i686-linux due to
`long long int`/`size_t` conversion errors, so let's just exclude it
from the devshell on that platform
Change-Id: If1077a7b3860db4381999c8e304f6d4b2bc96a05
Because of an objc quirk[1], calling curl_global_init for the first time
after fork() will always result in a crash.
Up until now the solution has been to set
OBJC_DISABLE_INITIALIZE_FORK_SAFETY for every nix process to ignore
that error.
This is less than ideal because we were setting it in package.nix,
which meant that running nix tests locally would fail because
that variable was not set.
Instead of working around that error we address it at the core -
by calling curl_global_init inside initLibStore, which should mean
curl will already have been initialized by the time we try to do so in
a forked process.
[1] 01edf1705f/runtime/objc-initialize.mm (L614-L636)
Change-Id: Icf26010a8be655127cc130efb9c77b603a6660d0
only two users of this function exist. only one used it in a way that
even bears resemblance to asynchronicity, and even that one didn't do
it right. fully async and parallel computation would have only worked
if any getEdgesAsync never calls the continuation it receives itself,
only from more derived callbacks running on other threads. calling it
directly would cause the decoupling promise to be awaited immediately
*on the original thread*, completely negating all nice async effects.
Change-Id: I0aa640950cf327533a32dee410105efdabb448df
this seems to be an oversight, considering that regular substitutions
are concurrency-limited. while not particularly necessary at present,
once we've removed the `Callback` based interfaces it will be needed.
Change-Id: Ide2d08169fcc24752cbd07a1d33fb8482f7034f5
When /nix/var (or, more precisely, NIX_STATE_DIR) does not exist at all,
Lix falls back to creating an adhoc chroot store in XDG_DATA_HOME.
b247ef72d[1] changed the way Store classes are initialized, and in the
migration, a `params2` was accidentally changed to `params`. This commit
restores the correct behavior, and in lieu of a single *character* fix,
this commit also changes the variable name to something more reasonable.
Fixes#274.
[1]: b247ef72dc
n.b., this code might deserve some more looking at anyway. this fallback
store creation throws away *all* Store params passed to
openFromNonUri() in favor of an entirely new set which only contains
the `root` param, which may or may not be the correct behavior
Change-Id: Ibea559b88a50e6d6e75a1f87d9d7816cabb2a8f3
As per our bootstrap governance discussions, here's a very simple
proposal which links as much as possible to our wiki.
Change-Id: I88b1c43f933ff7e529151b1e933fad40283383c4
Signed-off-by: Raito Bezarius <raito@lix.systems>
returning 0 from the callback for errors signals successful transfer if
the source returned no data even though the exception we've just caught
clearly disagrees. while this is not all that important (since the only
viable cause of such errors will be dataCallback, and the sole instance
of it being used already takes care of exceptions) we can just do this.
Change-Id: I2bb150eff447121d82e8e3aa4e00057c40523ac6
this will be necessary if we want download() to return a source instead
of consuming a sink, which will in turn be needed to remove coroutines.
Change-Id: I34ec241e9bbc5d32fbcd243b244e29c3757533aa
Some tests were failing on darwin,
if the auto-allocate-uids featrure was enabled.
This was because AAU on darwin works by setuid-ing as a non-existent
user, so the tests that were relying on `whoami` were failing.
In the case of trusted-users we fall back to printing the user id,
which is already handled gracefully in the daemon code - i.e. when
a user does not exist or for some other reason looking up their
username is not possible, the daemon falls back to searching for their
uid inside the trusted-users list.
When whoami is used to print the username for other purpose,
we default to printing nixbld.
Change-Id: Ib61615677565098cb5fbf5e26a946ef427c58caf
This doesn't comprehensively fix everything outdated in the manual, or
make the manual greatly better, but it does note down where at least
jade noticed it was wrong, and it does fix all the instances of
referencing Nix to conform to the style guide to the best of our
ability.
A lot of things have been commented out for being wrong, and there are
three types of FIXME introduced:
- FIXME(Lix): generically Lix needs to fix it
- FIXME(Qyriad): re lix-project/lix#215
- FIXME(meson): docs got outdated by meson changes and need rewriting
I did fix a bunch of it that I could, but there could certainly be
mistakes and this is definitely just an incremental improvement.
Fixes: lix-project/lix#266
Change-Id: I5993c4603d7f026a887089fce77db08394362135
2024-05-05 16:11:01 -07:00
824 changed files with 26772 additions and 18289 deletions
- To remove the stale label, just leave a new comment.
- _How to find the right people to ping?_→ [`git blame`](https://git-scm.com/docs/git-blame) to the rescue! (or GitHub's history and blame buttons.)
- You can always ask for help on [our Discourse Forum](https://discourse.nixos.org/) or on [Matrix - #nix:nixos.org](https://matrix.to/#/#nix:nixos.org).
## Suggestions for PRs
1. GitHub sometimes doesn't notify people who commented / reviewed a PR previously, when you (force) push commits. If you have addressed the reviews you can [officially ask for a review](https://docs.github.com/en/free-pro-team@latest/github/collaborating-with-issues-and-pull-requests/requesting-a-pull-request-review) from those who commented to you or anyone else.
2. If it is unfinished but you plan to finish it, please mark it as a draft.
3. If you don't expect to work on it any time soon, closing it with a short comment may encourage someone else to pick up your work.
4. To get things rolling again, rebase the PR against the target branch and address valid comments.
5. If you need a review to move forward, ask in [the Discourse thread for PRs that need help](https://discourse.nixos.org/t/prs-in-distress/3604).
6. If all you need is a merge, check the git history to find and [request reviews](https://docs.github.com/en/github/collaborating-with-issues-and-pull-requests/requesting-a-pull-request-review) from people who usually merge related contributions.
## Suggestions for issues
1. If it is resolved (either for you personally, or in general), please consider closing it.
2. If this might still be an issue, but you are not interested in promoting its resolution, please consider closing it while encouraging others to take over and reopen an issue if they care enough.
3. If you still have interest in resolving it, try to ping somebody who you believe might have an interest in the topic. Consider discussing the problem in [our Discourse Forum](https://discourse.nixos.org/).
4. As with all open source projects, your best option is to submit a Pull Request that addresses this issue. We :heart: this attitude!
**Memorandum on closing issues**
Don't be afraid to close an issue that holds valuable information. Closed issues stay in the system for people to search, read, cross-reference, or even reopen--nothing is lost! Closing obsolete issues is an important way to help maintainers focus their time and effort.
## Useful GitHub search queries
- [Open PRs with any stale-bot interaction](https://github.com/NixOS/nix/pulls?q=is%3Apr+is%3Aopen+commenter%3Aapp%2Fstale+)
- [Open PRs with any stale-bot interaction and `stale`](https://github.com/NixOS/nix/pulls?q=is%3Apr+is%3Aopen+commenter%3Aapp%2Fstale+label%3A%22stale%22)
- [Open PRs with any stale-bot interaction and NOT `stale`](https://github.com/NixOS/nix/pulls?q=is%3Apr+is%3Aopen+commenter%3Aapp%2Fstale+-label%3A%22stale%22+)
- [Open Issues with any stale-bot interaction](https://github.com/NixOS/nix/issues?q=is%3Aissue+is%3Aopen+commenter%3Aapp%2Fstale+)
- [Open Issues with any stale-bot interaction and `stale`](https://github.com/NixOS/nix/issues?q=is%3Aissue+is%3Aopen+commenter%3Aapp%2Fstale+label%3A%22stale%22+)
- [Open Issues with any stale-bot interaction and NOT `stale`](https://github.com/NixOS/nix/issues?q=is%3Aissue+is%3Aopen+commenter%3Aapp%2Fstale+-label%3A%22stale%22+)
This is a file used by the dev shell shellHook in package.nix to check that this is actually a Lix repo before installing git hooks. Its contents have no meaning.
Welcome and thank you for your interest in contributing to Nix!
We appreciate your support.
Welcome and thank you for considering contributing to Lix! We're currently in a soft release phase, and your support means a lot to us.
Reading and following these guidelines will help us make the contribution process easy and effective for everyone involved.
To ensure a smooth and effective contribution process, here is a summary of our guidelines:
## Getting help?
If you have any question regarding getting started or reporting bugs, feel free
to reach out to us.
On Matrix, we have a space at `#space:lix.systems`, composed of:
- [`#discuss:lix.systems`](https://matrix.to/#/#discuss:lix.systems) for discussions on Lix.
- [`#dev:lix.systems`](https://matrix.to/#/#dev:lix.systems) for the development channel on Lix.
## Report a bug
1. Check on the [GitHub issue tracker](https://github.com/NixOS/nix/issues) if your bug was already reported.
- Check if your bug has already been reported in the [issue tracker](https://git.lix.systems/lix-project/lix/issues).
- If you can't find the bug or feature, please open a new issue.
2. If you were not able to find the bug or feature [open a new issue](https://github.com/NixOS/nix/issues/new/choose)
3. The issue templates will guide you in specifying your issue.
The more complete the information you provide, the more likely it can be found by others and the more useful it is in the future.
Make sure reported bugs can be reproduced easily.
4. Once submitted, do not expect issues to be picked up or solved right away.
The only way to ensure this, is to [work on the issue yourself](#making-changes-to-nix).
We maintain a copy of the upstream Nix bugs. Their organisation can be read about [here](https://wiki.lix.systems/books/lix-contributors/page/bug-tracker-organisation).
## Report a security vulnerability
Check out the [security policy](https://github.com/NixOS/nix/security/policy).
For security vulnerabilities, reach out by email at `security at lix dot systems`.
## Making changes to Nix
## Making changes to Lix
1. Check for [pull requests](https://github.com/NixOS/nix/pulls) that might already cover the contribution you are about to make.
There are many open pull requests that might already do what you intent to work on.
You can use [labels](https://github.com/NixOS/nix/labels) to filter for relevant topics.
Before diving into making changes, we want to engage with you and your ideas.
2. Search for related issues that cover what you're going to work on. It could help to mention there that you will work on the issue.
We have a few policies in effect; please take the time to familiarize yourself:
Issues labeled [good first issue](https://github.com/NixOS/nix/labels/good-first-issue) should be relatively easy to fix and are likely to get merged quickly.
Pull requests addressing issues labeled [idea approved](https://github.com/NixOS/nix/labels/idea%20approved) are especially welcomed by maintainers and will receive prioritised review.
- [Style guide on code](https://wiki.lix.systems/books/lix-contributors/page/code)
- [Freeze policy and recommended contributions](https://wiki.lix.systems/books/lix-contributors/page/freezes-and-recommended-contributions)
3. Check the [Nix reference manual](https://nixos.org/manual/nix/unstable/contributing/hacking.html) for information on building Nix and running its tests.
To avoid duplication of effort, it may be a good idea to check out the list of
[pending pull requests](https://gerrit.lix.systems/q/status:open+-is:wip) (or "change lists", as Gerrit calls them). Once you have
an idea of what you might want to do, we recommend dropping a message on our
Matrix to ensure your contribution fits with our current schedule and plans
For contributions to the command line interface, please check the [CLI guidelines](https://nixos.org/manual/nix/unstable/contributing/cli-guideline.html).
When you're ready and your changes are ready to go:
4. Make your changes!
- Submit your code.
- Submitting a GitHub PR [on our mirror](https://github.com/lix-project/lix) is totally ok if that's easier for you and your change is relatively small (300 lines or so).
5. [Create a pull request](https://docs.github.com/en/pull-requests/collaborating-with-pull-requests/proposing-changes-to-your-work-with-pull-requests/creating-a-pull-request) for your changes.
* Link related issues in your pull request to inform interested parties and future contributors about your change.
* Make sure to have [a clean history of commits on your branch by using rebase](https://www.digitalocean.com/community/tutorials/how-to-rebase-and-update-a-pull-request).
If your pull request closes one or multiple issues, note that in the description using `Closes: #<number>`, as it will then happen automatically when your change is merged.
* [Mark the pull request as draft](https://docs.github.com/en/pull-requests/collaborating-with-pull-requests/proposing-changes-to-your-work-with-pull-requests/changing-the-stage-of-a-pull-request) if you're not done with the changes.
We may ask you to resubmit it as a Gerrit CL if it is necessary for the change you're making.
- Our primary code review system is [our Gerrit instance](https://gerrit.lix.systems), where you can open a change list (CL).
If you're new to Gerrit, check out [our wiki page about Gerrit](https://wiki.lix.systems/books/lix-contributors/page/gerrit).
- Make sure to link any related issues.
- If needed, indicate that the change is 'work in progress'.
6. Do not expect your pull request to be reviewed immediately.
Nix maintainers follow a [structured process for reviews and design decisions](https://github.com/NixOS/nix/tree/master/maintainers#project-board-protocol), which may or may not prioritise your work.
Following this checklist will make the process smoother for everyone:
- [ ] Fixes an [idea approved](https://github.com/NixOS/nix/labels/idea%20approved) issue
- [ ] User documentation in the [manual](..doc/manual/src)
- [ ] API documentation in header files
- [ ] Code and comments are self-explanatory
- [ ] Commit message explains **why** the change was made
- [ ] New feature or incompatible change: updated [release notes](./doc/manual/src/release-notes/rl-next.md)
7. If you need additional feedback or help to getting pull request into shape, ask other contributors using [@mentions](https://docs.github.com/en/get-started/writing-on-github/getting-started-with-writing-and-formatting-on-github/basic-writing-and-formatting-syntax#mentioning-people-and-teams).
## Making changes to the Nix manual
The Nix reference manual is hosted on https://nixos.org/manual/nix.
The underlying source files are located in [`doc/manual/src`](./doc/manual/src).
For small changes you can [use GitHub to edit these files](https://docs.github.com/en/repositories/working-with-files/managing-files/editing-files)
For larger changes see the [Nix reference manual](https://nixos.org/manual/nix/unstable/contributing/hacking.html).
## Getting help
Whenever you're stuck or do not know how to proceed, you can always ask for help.
The appropriate channels to do so can be found on the [NixOS Community](https://nixos.org/community/) page.
You can obtain an account on our platforms by clicking "Sign In with GitHub" on the sign-in page.
[AC_MSG_ERROR([Nix requires libeditline; it was not found via pkg-config, but via its header, but required functions do not work. Maybe it is too old? >= 1.14 is required.])])
AS_HELP_STRING([--disable-cpuid], [Do not determine microarchitecture levels with libcpuid (relevant to x86_64 only)]))
if test "x$enable_cpuid" != "xno"; then
PKG_CHECK_MODULES([LIBCPUID], [libcpuid],
[CXXFLAGS="$LIBCPUID_CFLAGS $CXXFLAGS"
have_libcpuid=1
AC_DEFINE([HAVE_LIBCPUID], [1], [Use libcpuid])]
)
fi
fi
AC_SUBST(HAVE_LIBCPUID, [$have_libcpuid])
# Look for libseccomp, required for Linux sandboxing.
case "$host_os" in
linux*)
AC_ARG_ENABLE([seccomp-sandboxing],
AS_HELP_STRING([--disable-seccomp-sandboxing],[Don't build support for seccomp sandboxing (only recommended if your arch doesn't support libseccomp yet!)
]))
if test "x$enable_seccomp_sandboxing" != "xno"; then
PKG_CHECK_MODULES([LIBSECCOMP], [libseccomp],
[CXXFLAGS="$LIBSECCOMP_CFLAGS $CXXFLAGS"])
have_seccomp=1
AC_DEFINE([HAVE_SECCOMP], [1], [Whether seccomp is available and should be used for sandboxing.])
else
have_seccomp=
fi
;;
*)
have_seccomp=
;;
esac
AC_SUBST(HAVE_SECCOMP, [$have_seccomp])
# Look for aws-cpp-sdk-s3.
AC_LANG_PUSH(C++)
AC_CHECK_HEADERS([aws/s3/S3Client.h],
[AC_DEFINE([ENABLE_S3], [1], [Whether to enable S3 support via aws-sdk-cpp.]) enable_s3=1],
[AC_DEFINE([ENABLE_S3], [0], [Whether to enable S3 support via aws-sdk-cpp.]) enable_s3=])
# This file is a mapping of metadata for change authors, sort of like
# maintainer-list.nix in nixpkgs.
#
# It's used for crediting people accurately in release notes. The release notes
# script will link to forgejo, then to GitHub if forgejo is not present.
#
# When adding someone from outside the Lix project, you generally want to simply link their GitHub profile without adding a display name unless they are well-known in the community by that display name.
#
# See doc/manual/src/contributing/hacking.md for more documentation on this file's format and typical usage.
synopsis: "Build failures caused by `allowSubstitutes = false` while being the wrong system now produce a decent error"
issues: [fj#484]
cls: [1841]
category: Fixes
credits: jade
---
Nix allows derivations to set `allowSubstitutes = false` in order to force them to be built locally without querying substituters for them.
This is useful for derivations that are very fast to build (especially if they produce large output).
However, this can shoot you in the foot if the derivation *has* to be substituted such as if the derivation is for another architecture, which is what `--always-allow-substitutes` is for.
Perhaps such derivations that are known to be impossible to build locally should ignore `allowSubstitutes` (irrespective of remote builders) in the future, but this at least reports the failure and solution directly.
```
$ nix build -f fail.nix
error: a 'unicornsandrainbows-linux' with features {} is required to build '/nix/store/...-meow.drv', but I am a 'x86_64-linux' with features {...}
Hint: the failing derivation has allowSubstitutes set to false, forcing it to be built rather than substituted.
Passing --always-allow-substitutes to force substitution may resolve this failure if the path is available in a substituter.
Previously a `.drv` that was truncated in the middle of a string would case nix to enter an infinite loop, eventually exhausting all memory and crashing.
synopsis: Duplicate attribute reports are more accurate
cls: 557
---
Duplicate attribute errors are now more accurate, showing the path at which an error was detected rather than the full, possibly longer, path that caused the error.
Error reports are now
```ShellSession
$ nix eval --expr '{ a.b = 1; a.b.c.d = 1; }'
error: attribute 'a.b' already defined at «string»:1:3
at «string»:1:12:
1| { a.b = 1; a.b.c.d = 1;
| ^
```
instead of
```ShellSession
$ nix eval --expr '{ a.b = 1; a.b.c.d = 1; }'
error: attribute 'a.b.c.d' already defined at «string»:1:3
synopsis: fix duplicate attribute error positions for `inherit`
prs: 9874
---
When an inherit caused a duplicate attribute error the position of the error was not reported correctly, placing the error with the inherit itself or at the start of the bindings block instead of the offending attribute name.
synopsis: "`inherit (x) ...` evaluates `x` only once"
prs: 9847
---
`inherit (x) a b ...` now evaluates the expression `x` only once for all inherited attributes rather than once for each inherited attribute.
This does not usually have a measurable impact, but side-effects (such as `builtins.trace`) would be duplicated and expensive expressions (such as derivations) could cause a measurable slowdown.
Leading periods were allowed by accident in Nix 2.4. The Nix team has considered this to be a bug, but this behavior has since been relied on by users, leading to unnecessary difficulties.
From now on, leading periods are officially, definitively supported. The names `.` and `..` are disallowed, as well as those starting with `.-` or `..-`.
Nix versions that denied leading periods are documented [in the issue](https://github.com/NixOS/nix/issues/912#issuecomment-1919583286).
synopsis: "`nix profile` now allows referring to elements by human-readable name, and no longer accepts indices"
prs: 8678
cls: [978, 980]
---
[`nix profile`](@docroot@/command-ref/new-cli/nix3-profile.md) now uses names to refer to installed packages when running [`list`](@docroot@/command-ref/new-cli/nix3-profile-list.md), [`remove`](@docroot@/command-ref/new-cli/nix3-profile-remove.md) or [`upgrade`](@docroot@/command-ref/new-cli/nix3-profile-upgrade.md) as opposed to indices. Indices have been removed. Profile element names are generated when a package is installed and remain the same until the package is removed.
**Warning**: The `manifest.nix` file used to record the contents of profiles has changed. Nix will automatically upgrade profiles to the new version when you modify the profile. After that, the profile can no longer be used by older versions of Nix.
synopsis: Experimental REPL support for documentation comments using `:doc`
cls: 564
---
Using `:doc` in the REPL now supports showing documentation comments when defined on a function.
Previously this was only able to document builtins, however it now will show comments defined on a lambda as well.
This support is experimental and relies on an embedded version of [nix-doc](https://github.com/lf-/nix-doc).
The logic also supports limited Markdown formatting of doccomments and should easily support any [RFC 145](https://github.com/NixOS/rfcs/blob/master/rfcs/0145-doc-strings.md)
compatible documentation comments in addition to simple commented documentation.
synopsis: add --store-path argument to `nix upgrade-nix`, to manually specify the Nix to upgrade to
cls: 953
---
`nix upgrade-nix` by default downloads a manifest to find the new Nix version to upgrade to, but now you can specify `--store-path` to upgrade Nix to an arbitrary version from the Nix store.
synopsis: using `nix profile` on `/nix/var/nix/profiles/default` no longer breaks `nix upgrade-nix`
cls: 952
---
On non-NixOS, Nix is conventionally installed into a `nix-env` style profile at /nix/var/nix/profiles/default.
Like any `nix-env` profile, using `nix profile` on it automatically migrates it to a `nix profile` style profile, which is incompatible with `nix-env`.
`nix upgrade-nix` previously relied solely on `nix-env` to do the upgrade, but now will work fine with either kind of profile.
Nix supports remote builds, where a local Nix installation can forward
Lix supports remote builds, where a local Lix installation can forward
Nix builds to other machines. This allows multiple builds to be
performed in parallel and allows Nix to perform multi-platform builds in
performed in parallel and allows Lix to perform multi-platform builds in
a semi-transparent way. For instance, if you perform a build for a
`x86_64-darwin` on an `i686-linux` machine, Nix can automatically
`x86_64-darwin` on an `i686-linux` machine, Lix can automatically
forward the build to a `x86_64-darwin` machine, if available.
To forward a build to a remote machine, it’s required that the remote
@ -38,12 +38,15 @@ contains Nix.
> **Warning**
>
> If you are building via the Nix daemon, it is the Nix daemon user account (that is, `root`) that should have SSH access to a user (not necessarily `root`) on the remote machine.
> If you are building via the Lix daemon (default on Linux and macOS), it is the Lix daemon user account (that is, `root`) that should have SSH access to a user (not necessarily `root`) on the remote machine.
>
> Furthermore, `root` needs to have the public host keys for the remote system in its `.ssh/known_hosts`.
> To add them to `known_hosts` for root, do `ssh-keyscan USER@HOST | sudo tee -a ~root/.ssh/known_hosts`.
>
> If you can’t or don’t want to configure `root` to be able to access the remote machine, you can use a private Nix store instead by passing e.g. `--store ~/my-nix` when running a Nix command from the local machine.
The list of remote machines can be specified on the command line or in
the Nix configuration file. The former is convenient for testing. For
the Lix configuration file. The former is convenient for testing. For
example, the following command allows you to build a derivation for
`x86_64-darwin` on a Linux machine:
@ -84,17 +87,17 @@ default, set it to `-`.
3. The SSH identity file to be used to log in to the remote machine. If
omitted, SSH will use its regular identities.
4. The maximum number of builds that Nix will execute in parallel on
4. The maximum number of builds that Lix will execute in parallel on
the machine. Typically this should be equal to the number of CPU
cores. For instance, the machine `itchy` in the example will execute
up to 8 builds in parallel.
5. The “speed factor”, indicating the relative speed of the machine. If
there are multiple machines of the right type, Nix will prefer the
there are multiple machines of the right type, Lix will prefer the
fastest, taking load into account.
6. A comma-separated list of *supported features*. If a derivation has
the `requiredSystemFeatures` attribute, then Nix will only perform
the `requiredSystemFeatures` attribute, then Lix will only perform
the derivation on a machine that has the specified features. For
Nix supports a variety of configuration settings, which are read from configuration files or taken as command line flags.
Lix supports a variety of configuration settings, which are read from configuration files or taken as command line flags.
## Configuration file
By default Nix reads settings from the following places, in that order:
By default Lix reads settings from the following places, in that order:
1. The system-wide configuration file `sysconfdir/nix/nix.conf` (i.e. `/etc/nix/nix.conf` on most systems), or `$NIX_CONF_DIR/nix.conf` if [`NIX_CONF_DIR`](./env-common.md#env-NIX_CONF_DIR) is set.
If `NIX_PATH` is not set at all, Nix will fall back to the following list in [impure](@docroot@/command-ref/conf-file.md#conf-pure-eval) and [unrestricted](@docroot@/command-ref/conf-file.md#conf-restrict-eval) evaluation mode:
If `NIX_PATH` is not set at all, Lix will fall back to the following list in [impure](@docroot@/command-ref/conf-file.md#conf-pure-eval) and [unrestricted](@docroot@/command-ref/conf-file.md#conf-restrict-eval) evaluation mode:
Keep going in case of failed builds, to the greatest extent possible.
That is, if building an input of some derivation fails, Nix will still build the other inputs, but not the derivation itself.
Without this option, Nix stops if any build fails (except for builds of substitutes), possibly killing builds in progress (in case of parallel or distributed builds).
That is, if building an input of some derivation fails, Lix will still build the other inputs, but not the derivation itself.
Without this option, Lix stops if any build fails (except for builds of substitutes), possibly killing builds in progress (in case of parallel or distributed builds).
Whenever Nix attempts to build a derivation for which substitutes are known for each output path, but realising the output paths through the substitutes fails, fall back on building the derivation.
Whenever Lix attempts to build a derivation for which substitutes are known for each output path, but realising the output paths through the substitutes fails, fall back on building the derivation.
The most common scenario in which this is useful is when we have registered substitutes in order to perform binary distribution from, say, a network repository.
If the repository is down, the realisation of the derivation will fail.
When this option is specified, Nix will build the derivation instead.
When this option is specified, Lix will build the derivation instead.
Thus, installation from binaries falls back on installation from source.
This option is not the default since it is generally not desirable for a transient failure in obtaining the substitutes to lead to a full build from source (with the related consumption of resources).
Maximilian Bosch
jade
alois31
Rebecca Turner
eldritch horrors
Pierre Bourdon
sugar🍬🍭🏳️⚧️
piegames
Audrey Dutcher
Qyriad
Artemis Tosini
Max “Goldstein” Siling
Jeremy List
Isabel
V.
Winter Cute
raito
Lunaphied
nan-git
Quantum Jump
Delan Azabani
Robert Hensing
kloenk
Ilya K
julia
Mario Rodas
Linus Heckemann
Nikodem Rabuliński
terru -
Tom Hubrecht
puck
Alyssa Ross
Yorick
FireFly
Patrick Jackson