Turns errors like this:
let
throwMsg = a: throw (a + " invalid bar");
in throwMsg "bullshit"
error:
… from call site
at «string»:3:4:
2| throwMsg = a: throw (a + " invalid bar");
3| in throwMsg "bullshit"
| ^
… while calling 'throwMsg'
at «string»:2:14:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
error: bullshit invalid bar
into errors like this:
let
throwMsg = a: throw (a + " invalid bar");
in throwMsg "bullshit"
error:
… from call site
at «string»:3:4:
2| throwMsg = a: throw (a + " invalid bar");
3| in throwMsg "bullshit"
| ^
… while calling 'throwMsg'
at «string»:2:14:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
… caused by explicit throw
at «string»:2:17:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
error: bullshit invalid bar
Change-Id: I593688928ece20f97999d1bf03b2b46d9ac338cb
Turns errors like:
let
somepkg.src = throw "invalid foobar";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
error: invalid foobar
into errors like:
let
somepkg.src = throw "invalid foobar";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
… while evaluating 'somepkg.src' to select 'meta' on it
at «string»:3:4:
2| somepkg.src = throw "invalid foobar";
3| in somepkg.src.meta
| ^
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
error: invalid foobar
And for type errors, from:
let
somepkg.src = "I'm not an attrset";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = "I'm not an attrset";
| ^
3| in somepkg.src.meta
… while selecting an attribute
at «string»:3:4:
2| somepkg.src = "I'm not an attrset";
3| in somepkg.src.meta
| ^
error: expected a set but found a string: "I'm not an attrset"
into:
let
somepkg.src = "I'm not an attrset";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = "I'm not an attrset";
| ^
3| in somepkg.src.meta
… while selecting 'meta' on 'somepkg.src'
at «string»:3:4:
2| somepkg.src = "I'm not an attrset";
3| in somepkg.src.meta
| ^
error: expected a set but found a string: "I'm not an attrset"
For the low price of an enumerate() and a lambda you too can have the
incorrect line of code actually show up in the trace!
Change-Id: Ic1491c86e33c167891bdac9adad6224784760bd6
Turns errors like this:
let
throwMsg = a: throw (a + " invalid bar");
in throwMsg "bullshit"
error:
… from call site
at «string»:3:4:
2| throwMsg = a: throw (a + " invalid bar");
3| in throwMsg "bullshit"
| ^
… while calling 'throwMsg'
at «string»:2:14:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
error: bullshit invalid bar
into errors like this:
let
throwMsg = a: throw (a + " invalid bar");
in throwMsg "bullshit"
error:
… from call site
at «string»:3:4:
2| throwMsg = a: throw (a + " invalid bar");
3| in throwMsg "bullshit"
| ^
… while calling 'throwMsg'
at «string»:2:14:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
… caused by explicit throw
at «string»:2:17:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
error: bullshit invalid bar
Change-Id: I593688928ece20f97999d1bf03b2b46d9ac338cb
Turns errors like:
let
somepkg.src = throw "invalid foobar";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
error: invalid foobar
into errors like:
let
somepkg.src = throw "invalid foobar";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
… while evaluating 'somepkg.src' to select 'meta' on it
at «string»:3:4:
2| somepkg.src = throw "invalid foobar";
3| in somepkg.src.meta
| ^
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
error: invalid foobar
And for type errors, from:
let
somepkg.src = "I'm not an attrset";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = "I'm not an attrset";
| ^
3| in somepkg.src.meta
… while selecting an attribute
at «string»:3:4:
2| somepkg.src = "I'm not an attrset";
3| in somepkg.src.meta
| ^
error: expected a set but found a string: "I'm not an attrset"
into:
let
somepkg.src = "I'm not an attrset";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = "I'm not an attrset";
| ^
3| in somepkg.src.meta
… while selecting 'meta' on 'somepkg.src'
at «string»:3:4:
2| somepkg.src = "I'm not an attrset";
3| in somepkg.src.meta
| ^
error: expected a set but found a string: "I'm not an attrset"
For the low price of an enumerate() and a lambda you too can have the
incorrect line of code actually show up in the trace!
Change-Id: Ic1491c86e33c167891bdac9adad6224784760bd6
Turns errors like:
let
errpkg = throw "invalid foobar";
in errpkg.meta
error:
… while calling the 'throw' builtin
at «string»:2:12:
1| let
2| errpkg = throw "invalid foobar";
| ^
3| in errpkg.meta
error: invalid foobar
into errors like:
let
errpkg = throw "invalid foobar";
in errpkg.meta
error:
… while evaluating 'errpkg' to select 'meta' on it
at «string»:3:4:
2| errpkg = throw "invalid foobar";
3| in errpkg.meta
| ^
… while calling the 'throw' builtin
at «string»:2:12:
1| let
2| errpkg = throw "invalid foobar";
| ^
3| in errpkg.meta
error: invalid foobar
For the low price of one try/catch, you too can have the incorrect line
of code actually show up in the trace!
Change-Id: If8d6200ec1567706669d405c34adcd7e2d2cd29d
Turns errors like this:
let
throwMsg = a: throw (a + " invalid bar");
in throwMsg "bullshit"
error:
… from call site
at «string»:3:4:
2| throwMsg = a: throw (a + " invalid bar");
3| in throwMsg "bullshit"
| ^
… while calling 'throwMsg'
at «string»:2:14:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
error: bullshit invalid bar
into errors like this:
let
throwMsg = a: throw (a + " invalid bar");
in throwMsg "bullshit"
error:
… from call site
at «string»:3:4:
2| throwMsg = a: throw (a + " invalid bar");
3| in throwMsg "bullshit"
| ^
… while calling 'throwMsg'
at «string»:2:14:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
… caused by explicit throw
at «string»:2:17:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
error: bullshit invalid bar
Change-Id: I593688928ece20f97999d1bf03b2b46d9ac338cb
Turns errors like:
let
somepkg.src = throw "invalid foobar";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
error: invalid foobar
into errors like:
let
somepkg.src = throw "invalid foobar";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
… while evaluating 'somepkg.src' to select 'meta' on it
at «string»:3:4:
2| somepkg.src = throw "invalid foobar";
3| in somepkg.src.meta
| ^
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
error: invalid foobar
And for type errors, from:
let
somepkg.src = "I'm not an attrset";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = "I'm not an attrset";
| ^
3| in somepkg.src.meta
… while selecting an attribute
at «string»:3:4:
2| somepkg.src = "I'm not an attrset";
3| in somepkg.src.meta
| ^
error: expected a set but found a string: "I'm not an attrset"
into:
let
somepkg.src = "I'm not an attrset";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = "I'm not an attrset";
| ^
3| in somepkg.src.meta
… while selecting 'meta' on 'somepkg.src'
at «string»:3:4:
2| somepkg.src = "I'm not an attrset";
3| in somepkg.src.meta
| ^
error: expected a set but found a string: "I'm not an attrset"
For the low price of an enumerate() and a lambda you too can have the
incorrect line of code actually show up in the trace!
Change-Id: Ic1491c86e33c167891bdac9adad6224784760bd6
Turns errors like this:
let
throwMsg = a: throw (a + " invalid bar");
in throwMsg "bullshit"
error:
… from call site
at «string»:3:4:
2| throwMsg = a: throw (a + " invalid bar");
3| in throwMsg "bullshit"
| ^
… while calling 'throwMsg'
at «string»:2:14:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
error: bullshit invalid bar
into errors like this:
let
throwMsg = a: throw (a + " invalid bar");
in throwMsg "bullshit"
error:
… from call site
at «string»:3:4:
2| throwMsg = a: throw (a + " invalid bar");
3| in throwMsg "bullshit"
| ^
… while calling 'throwMsg'
at «string»:2:14:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
… caused by explicit throw
at «string»:2:17:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
error: bullshit invalid bar
Change-Id: I593688928ece20f97999d1bf03b2b46d9ac338cb
Turns errors like:
let
somepkg.src = throw "invalid foobar";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
error: invalid foobar
into errors like:
let
somepkg.src = throw "invalid foobar";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
… while evaluating 'somepkg.src' to select 'meta' on it
at «string»:3:4:
2| somepkg.src = throw "invalid foobar";
3| in somepkg.src.meta
| ^
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
error: invalid foobar
And for type errors, from:
let
somepkg.src = "I'm not an attrset";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = "I'm not an attrset";
| ^
3| in somepkg.src.meta
… while selecting an attribute
at «string»:3:4:
2| somepkg.src = "I'm not an attrset";
3| in somepkg.src.meta
| ^
error: expected a set but found a string: "I'm not an attrset"
into:
let
somepkg.src = "I'm not an attrset";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = "I'm not an attrset";
| ^
3| in somepkg.src.meta
… while selecting 'meta' on 'somepkg.src'
at «string»:3:4:
2| somepkg.src = "I'm not an attrset";
3| in somepkg.src.meta
| ^
error: expected a set but found a string: "I'm not an attrset"
For the low price of an enumerate() and a lambda you too can have the
incorrect line of code actually show up in the trace!
Change-Id: Ic1491c86e33c167891bdac9adad6224784760bd6
Turns errors like:
let
errpkg = throw "invalid foobar";
in errpkg.meta
error:
… while calling the 'throw' builtin
at «string»:2:12:
1| let
2| errpkg = throw "invalid foobar";
| ^
3| in errpkg.meta
error: invalid foobar
into errors like:
let
errpkg = throw "invalid foobar";
in errpkg.meta
error:
… while evaluating 'errpkg' to select 'meta' on it
at «string»:3:4:
2| errpkg = throw "invalid foobar";
3| in errpkg.meta
| ^
… while calling the 'throw' builtin
at «string»:2:12:
1| let
2| errpkg = throw "invalid foobar";
| ^
3| in errpkg.meta
error: invalid foobar
For the low price of one try/catch, you too can have the incorrect line
of code actually show up in the trace!
Change-Id: If8d6200ec1567706669d405c34adcd7e2d2cd29d
Turns errors like this:
let
throwMsg = a: throw (a + " invalid bar");
in throwMsg "bullshit"
error:
… from call site
at «string»:3:4:
2| throwMsg = a: throw (a + " invalid bar");
3| in throwMsg "bullshit"
| ^
… while calling 'throwMsg'
at «string»:2:14:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
error: bullshit invalid bar
into errors like this:
let
throwMsg = a: throw (a + " invalid bar");
in throwMsg "bullshit"
error:
… from call site
at «string»:3:4:
2| throwMsg = a: throw (a + " invalid bar");
3| in throwMsg "bullshit"
| ^
… while calling 'throwMsg'
at «string»:2:14:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
… caused by explicit throw
at «string»:2:17:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
error: bullshit invalid bar
Change-Id: I593688928ece20f97999d1bf03b2b46d9ac338cb
Turns errors like:
let
somepkg.src = throw "invalid foobar";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
error: invalid foobar
into errors like:
let
somepkg.src = throw "invalid foobar";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
… while evaluating 'somepkg.src' to select 'meta' on it
at «string»:3:4:
2| somepkg.src = throw "invalid foobar";
3| in somepkg.src.meta
| ^
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
error: invalid foobar
And for type errors, from:
let
somepkg.src = "I'm not an attrset";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = "I'm not an attrset";
| ^
3| in somepkg.src.meta
… while selecting an attribute
at «string»:3:4:
2| somepkg.src = "I'm not an attrset";
3| in somepkg.src.meta
| ^
error: expected a set but found a string: "I'm not an attrset"
into:
let
somepkg.src = "I'm not an attrset";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = "I'm not an attrset";
| ^
3| in somepkg.src.meta
… while selecting 'meta' on 'somepkg.src'
at «string»:3:4:
2| somepkg.src = "I'm not an attrset";
3| in somepkg.src.meta
| ^
error: expected a set but found a string: "I'm not an attrset"
For the low price of an enumerate() and a lambda you too can have the
incorrect line of code actually show up in the trace!
Change-Id: Ic1491c86e33c167891bdac9adad6224784760bd6
Turns errors like:
let
errpkg = throw "invalid foobar";
in errpkg.meta
error:
… while calling the 'throw' builtin
at «string»:2:12:
1| let
2| errpkg = throw "invalid foobar";
| ^
3| in errpkg.meta
error: invalid foobar
into errors like:
let
errpkg = throw "invalid foobar";
in errpkg.meta
error:
… while evaluating 'errpkg' to select 'meta' on it
at «string»:3:4:
2| errpkg = throw "invalid foobar";
3| in errpkg.meta
| ^
… while calling the 'throw' builtin
at «string»:2:12:
1| let
2| errpkg = throw "invalid foobar";
| ^
3| in errpkg.meta
error: invalid foobar
For the low price of one try/catch, you too can have the incorrect line
of code actually show up in the trace!
Change-Id: If8d6200ec1567706669d405c34adcd7e2d2cd29d
Add a platform-specific function for starting sandboxed child.
Generally this just means startProcess, but on Linux we use flags
for clone to start a new namespace
Change-Id: I41c8aba62676a162388bbe5ab8a7518904c7b058
Add a new OS-specific hook called `prepareSandbox`, run before forking
On Darwin this is empty as nothing is required,
on Linux this creates the chroot directory and adds basic files,
and on platforms using a fallback this throws an exception
Change-Id: Ie30c38c387f2e0e5844b2afa32fd4d33b1180dae
generators are a better basis for serializers than streaming into sinks
as we do currently for many reasons, such as being usable as sources if
one wishes to (without requiring an intermediate sink to serialize full
data sets into memory, or boost coroutines to turn sinks into sources),
composing more naturally (as one can just yield a sub-generator instead
of being forced to wrap entire substreams into clunky functions or even
more clunky custom types to implement operator<< on), allowing wrappers
to transform data with clear ownership semantics (removing the need for
explicit memory allocations and Source wrappers), and many other things
Change-Id: I361d89ff556354f6930d9204f55117565f2f7f20
the `*Source` name is a slight misnomer since we do also have a
Source type, but we can probably live with this for time being.
Change-Id: I54eb2e59a4009014e324797f16b80b962759c7d3
not used anywhere yet, but we'll use this a lot soon for generators that
return file contents, wire protocol fragments, or indeed any byte stream
Change-Id: I01a46f9bf9d75aaf4a5d7662773b99f498862a28
this will be the basis of non-boost coroutines in lix. anything that is
a boost coroutine *should* be representable with a Generator coroutine,
and many things that are not currently boost coroutines but behave much
like one (such as, notably, serializers) should be as well. this allows
us to greatly simplify many things that look like iteration but aren't.
Change-Id: I2cebcefa0148b631fb30df4c8cfa92167a407e34
Turns errors like this:
let
throwMsg = a: throw (a + " invalid bar");
in throwMsg "bullshit"
error:
… from call site
at «string»:3:4:
2| throwMsg = a: throw (a + " invalid bar");
3| in throwMsg "bullshit"
| ^
… while calling 'throwMsg'
at «string»:2:14:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
error: bullshit invalid bar
into errors like this:
let
throwMsg = a: throw (a + " invalid bar");
in throwMsg "bullshit"
error:
… from call site
at «string»:3:4:
2| throwMsg = a: throw (a + " invalid bar");
3| in throwMsg "bullshit"
| ^
… while calling 'throwMsg'
at «string»:2:14:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
… caused by explicit throw
at «string»:2:17:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
error: bullshit invalid bar
Change-Id: I593688928ece20f97999d1bf03b2b46d9ac338cb
Turns errors like:
let
somepkg.src = throw "invalid foobar";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
error: invalid foobar
into errors like:
let
somepkg.src = throw "invalid foobar";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
… while evaluating 'somepkg.src' to select 'meta' on it
at «string»:3:4:
2| somepkg.src = throw "invalid foobar";
3| in somepkg.src.meta
| ^
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
error: invalid foobar
And for type errors, from:
let
somepkg.src = "I'm not an attrset";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = "I'm not an attrset";
| ^
3| in somepkg.src.meta
… while selecting an attribute
at «string»:3:4:
2| somepkg.src = "I'm not an attrset";
3| in somepkg.src.meta
| ^
error: expected a set but found a string: "I'm not an attrset"
into:
let
somepkg.src = "I'm not an attrset";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = "I'm not an attrset";
| ^
3| in somepkg.src.meta
… while selecting 'meta' on 'somepkg.src'
at «string»:3:4:
2| somepkg.src = "I'm not an attrset";
3| in somepkg.src.meta
| ^
error: expected a set but found a string: "I'm not an attrset"
For the low price of an enumerate() and a lambda you too can have the
incorrect line of code actually show up in the trace!
Change-Id: Ic1491c86e33c167891bdac9adad6224784760bd6
Turns errors like:
let
errpkg = throw "invalid foobar";
in errpkg.meta
error:
… while calling the 'throw' builtin
at «string»:2:12:
1| let
2| errpkg = throw "invalid foobar";
| ^
3| in errpkg.meta
error: invalid foobar
into errors like:
let
errpkg = throw "invalid foobar";
in errpkg.meta
error:
… while evaluating 'errpkg' to select 'meta' on it
at «string»:3:4:
2| errpkg = throw "invalid foobar";
3| in errpkg.meta
| ^
… while calling the 'throw' builtin
at «string»:2:12:
1| let
2| errpkg = throw "invalid foobar";
| ^
3| in errpkg.meta
error: invalid foobar
For the low price of one try/catch, you too can have the incorrect line
of code actually show up in the trace!
Change-Id: If8d6200ec1567706669d405c34adcd7e2d2cd29d
Turns errors like this:
let
throwMsg = a: throw (a + " invalid bar");
in throwMsg "bullshit"
error:
… from call site
at «string»:3:4:
2| throwMsg = a: throw (a + " invalid bar");
3| in throwMsg "bullshit"
| ^
… while calling 'throwMsg'
at «string»:2:14:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
error: bullshit invalid bar
into errors like this:
let
throwMsg = a: throw (a + " invalid bar");
in throwMsg "bullshit"
error:
… from call site
at «string»:3:4:
2| throwMsg = a: throw (a + " invalid bar");
3| in throwMsg "bullshit"
| ^
… while calling 'throwMsg'
at «string»:2:14:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
… caused by explicit throw
at «string»:2:17:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
error: bullshit invalid bar
Change-Id: I593688928ece20f97999d1bf03b2b46d9ac338cb
Turns errors like:
let
somepkg.src = throw "invalid foobar";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
error: invalid foobar
into errors like:
let
somepkg.src = throw "invalid foobar";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
… while evaluating 'somepkg.src' to select 'meta' on it
at «string»:3:4:
2| somepkg.src = throw "invalid foobar";
3| in somepkg.src.meta
| ^
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
error: invalid foobar
And for type errors, from:
let
somepkg.src = "I'm not an attrset";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = "I'm not an attrset";
| ^
3| in somepkg.src.meta
… while selecting an attribute
at «string»:3:4:
2| somepkg.src = "I'm not an attrset";
3| in somepkg.src.meta
| ^
error: expected a set but found a string: "I'm not an attrset"
into:
let
somepkg.src = "I'm not an attrset";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = "I'm not an attrset";
| ^
3| in somepkg.src.meta
… while selecting 'meta' on 'somepkg.src'
at «string»:3:4:
2| somepkg.src = "I'm not an attrset";
3| in somepkg.src.meta
| ^
error: expected a set but found a string: "I'm not an attrset"
For the low price of an enumerate() and a lambda you too can have the
incorrect line of code actually show up in the trace!
Change-Id: Ic1491c86e33c167891bdac9adad6224784760bd6
Turns errors like:
let
errpkg = throw "invalid foobar";
in errpkg.meta
error:
… while calling the 'throw' builtin
at «string»:2:12:
1| let
2| errpkg = throw "invalid foobar";
| ^
3| in errpkg.meta
error: invalid foobar
into errors like:
let
errpkg = throw "invalid foobar";
in errpkg.meta
error:
… while evaluating 'errpkg' to select 'meta' on it
at «string»:3:4:
2| errpkg = throw "invalid foobar";
3| in errpkg.meta
| ^
… while calling the 'throw' builtin
at «string»:2:12:
1| let
2| errpkg = throw "invalid foobar";
| ^
3| in errpkg.meta
error: invalid foobar
For the low price of one try/catch, you too can have the incorrect line
of code actually show up in the trace!
Change-Id: If8d6200ec1567706669d405c34adcd7e2d2cd29d
Turns errors like this:
let
throwMsg = a: throw (a + " invalid bar");
in throwMsg "bullshit"
error:
… from call site
at «string»:3:4:
2| throwMsg = a: throw (a + " invalid bar");
3| in throwMsg "bullshit"
| ^
… while calling 'throwMsg'
at «string»:2:14:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
error: bullshit invalid bar
into errors like this:
let
throwMsg = a: throw (a + " invalid bar");
in throwMsg "bullshit"
error:
… from call site
at «string»:3:4:
2| throwMsg = a: throw (a + " invalid bar");
3| in throwMsg "bullshit"
| ^
… while calling 'throwMsg'
at «string»:2:14:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
… caused by explicit throw
at «string»:2:17:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
error: bullshit invalid bar
Change-Id: I593688928ece20f97999d1bf03b2b46d9ac338cb
Turns errors like:
let
somepkg.src = throw "invalid foobar";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
error: invalid foobar
into errors like:
let
somepkg.src = throw "invalid foobar";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
… while evaluating 'somepkg.src' to select 'meta' on it
at «string»:3:4:
2| somepkg.src = throw "invalid foobar";
3| in somepkg.src.meta
| ^
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
error: invalid foobar
And for type errors, from:
let
somepkg.src = "I'm not an attrset";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = "I'm not an attrset";
| ^
3| in somepkg.src.meta
… while selecting an attribute
at «string»:3:4:
2| somepkg.src = "I'm not an attrset";
3| in somepkg.src.meta
| ^
error: expected a set but found a string: "I'm not an attrset"
into:
let
somepkg.src = "I'm not an attrset";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = "I'm not an attrset";
| ^
3| in somepkg.src.meta
… while selecting 'meta' on 'somepkg.src'
at «string»:3:4:
2| somepkg.src = "I'm not an attrset";
3| in somepkg.src.meta
| ^
error: expected a set but found a string: "I'm not an attrset"
For the low price of an enumerate() and a lambda you too can have the
incorrect line of code actually show up in the trace!
Change-Id: Ic1491c86e33c167891bdac9adad6224784760bd6
Turns errors like:
let
errpkg = throw "invalid foobar";
in errpkg.meta
error:
… while calling the 'throw' builtin
at «string»:2:12:
1| let
2| errpkg = throw "invalid foobar";
| ^
3| in errpkg.meta
error: invalid foobar
into errors like:
let
errpkg = throw "invalid foobar";
in errpkg.meta
error:
… while evaluating 'errpkg' to select 'meta' on it
at «string»:3:4:
2| errpkg = throw "invalid foobar";
3| in errpkg.meta
| ^
… while calling the 'throw' builtin
at «string»:2:12:
1| let
2| errpkg = throw "invalid foobar";
| ^
3| in errpkg.meta
error: invalid foobar
For the low price of one try/catch, you too can have the incorrect line
of code actually show up in the trace!
Change-Id: If8d6200ec1567706669d405c34adcd7e2d2cd29d
Turns errors like this:
let
throwMsg = a: throw (a + " invalid bar");
in throwMsg "bullshit"
error:
… from call site
at «string»:3:4:
2| throwMsg = a: throw (a + " invalid bar");
3| in throwMsg "bullshit"
| ^
… while calling 'throwMsg'
at «string»:2:14:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
error: bullshit invalid bar
into errors like this:
let
throwMsg = a: throw (a + " invalid bar");
in throwMsg "bullshit"
error:
… from call site
at «string»:3:4:
2| throwMsg = a: throw (a + " invalid bar");
3| in throwMsg "bullshit"
| ^
… while calling 'throwMsg'
at «string»:2:14:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
… caused by explicit throw
at «string»:2:17:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
error: bullshit invalid bar
Change-Id: I593688928ece20f97999d1bf03b2b46d9ac338cb
Turns errors like:
let
somepkg.src = throw "invalid foobar";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
error: invalid foobar
into errors like:
let
somepkg.src = throw "invalid foobar";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
… while evaluating 'somepkg.src' to select 'meta' on it
at «string»:3:4:
2| somepkg.src = throw "invalid foobar";
3| in somepkg.src.meta
| ^
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
error: invalid foobar
And for type errors, from:
let
somepkg.src = "I'm not an attrset";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = "I'm not an attrset";
| ^
3| in somepkg.src.meta
… while selecting an attribute
at «string»:3:4:
2| somepkg.src = "I'm not an attrset";
3| in somepkg.src.meta
| ^
error: expected a set but found a string: "I'm not an attrset"
into:
let
somepkg.src = "I'm not an attrset";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = "I'm not an attrset";
| ^
3| in somepkg.src.meta
… while selecting 'meta' on 'somepkg.src'
at «string»:3:4:
2| somepkg.src = "I'm not an attrset";
3| in somepkg.src.meta
| ^
error: expected a set but found a string: "I'm not an attrset"
For the low price of an enumerate() and a lambda you too can have the
incorrect line of code actually show up in the trace!
Change-Id: Ic1491c86e33c167891bdac9adad6224784760bd6
Turns errors like:
let
errpkg = throw "invalid foobar";
in errpkg.meta
error:
… while calling the 'throw' builtin
at «string»:2:12:
1| let
2| errpkg = throw "invalid foobar";
| ^
3| in errpkg.meta
error: invalid foobar
into errors like:
let
errpkg = throw "invalid foobar";
in errpkg.meta
error:
… while evaluating 'errpkg' to select 'meta' on it
at «string»:3:4:
2| errpkg = throw "invalid foobar";
3| in errpkg.meta
| ^
… while calling the 'throw' builtin
at «string»:2:12:
1| let
2| errpkg = throw "invalid foobar";
| ^
3| in errpkg.meta
error: invalid foobar
For the low price of one try/catch, you too can have the incorrect line
of code actually show up in the trace!
Change-Id: If8d6200ec1567706669d405c34adcd7e2d2cd29d
not printing activities at all when no progress information is available
hides *all* progress information from e.g. flake show. this is not ideal
and needs to be fixed, but the fix *still* has problems with flake show:
in multiline mode we will overwrite all useful flake show output as soon
as the progress bar is redrawn. flake show output is also mangled in any
number of other situations (like -v being set), so we should probably be
not too worried about it and fix progress reporting properly another day
Change-Id: I6d39d670e261bbae00560b6a8e15dec8e16b35c4
Previously, the progress bar had two subtly different states in which the bar
would not actually render, both with their own shortcomings: inactive (which
was irreversible) and paused (reversible, but swallowing logs). Furthermore,
there was no way of resetting the statistics, so a very bad solution was
implemented (243c0f18da) that would create a new
logger for each line of the repl, leaking the previous one and discarding the
value of printBuildLogs. Finally, if stderr was not attached to a TTY, the
update thread was started even though the logger was not active, violating the
invariant required by the destructor (which is not observed because the logger
is leaked).
In this commit, the two aforementioned states are unified into a single one,
which can be exited again, correctly upholds the invariant that the update
thread is only running while the progress bar is active, and does not swallow
logs. The latter change in behavior is not expected to be a problems in the
rare cases where the paused state was used before, since other loggers (like
the simple one) don't exhibit it anyway. The startProgressBar/stopProgressBar
API is removed due to being a footgun, and a new method for properly resetting
the progress is added.
Co-Authored-By: Qyriad <qyriad@qyriad.me>
Change-Id: I2b7c3eb17d439cd0c16f7b896cfb61239ac7ff3a
we do not have any of these warnings appearing at the moment, but it
seems like a good idea to enable [[nodiscard]] checking anyway. once
we start introducing more functions with must-use conditions we will
need such checking, and the rust stdlib has proven them very useful.
Change-Id: Ibb6b042ae1ec5f527f8dc2809a7816a4c1548ae2
The `allow-flake-configuration` option allows the user to control whether to
accept configuration options supplied by flakes. Unfortunately, setting this
to false really meant "ask each time" (with an option to remember the choice
for each specific option encountered). Let no mean no, and introduce (and
default to) a separate value for the "ask each time" behaviour.
Co-Authored-By: Jade Lovelace <lix@jade.fyi>
Change-Id: I7ccd67a95bfc92cffc1ebdc972d243f5191cc1b4
We previously allowed you to map any flake URL to any other flake URL,
including shorthand flakerefs, indirect flake URLs like `flake:nixpkgs`,
direct flake URLs like `github:NixOS/nixpkgs`, or local paths.
But flake registry entries mapping from direct flake URLs often come
from swapping the 'from' and 'to' arguments by accident, and even when
created intentionally, they may not actually work correctly.
This patch rejects those URLs (and fully-qualified flake: URLs), making
it harder to swap the arguments by accident.
Fixes#181.
Change-Id: I24713643a534166c052719b8770a4edfcfdb8cf3
This is a shameless layering violation in favour of UX. It falls back
trivially to "unknown", so it's purely a UX feature.
Diagnostic sample:
```
error: hash mismatch in fixed-output derivation '/nix/store/sjfw324j4533lwnpmr5z4icpb85r63ai-x1.drv':
likely URL: https://meow.puppy.forge/puppy.tar.gz
specified: sha256-AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=
got: sha256-a1Qvp3FOOkWpL9kFHgugU1ok5UtRPSu+NwCZKbbaEro=
```
Change-Id: I873eedcf7984ab23f57a6754be00232b5cb5b02c
this most notably affects `nix eval`: if there is no progress bar to be
shown and no activities going on we should not print anything at all. a
progress bar with no activities would print a bunch of terminal escapes
*and a space*, which is not helpful in simple cases like nix eval -E 1.
notably this does *not* affect nix eval called on non-terminal outputs,
but it is slightly confusing nevertheless (and not difficult to avoid).
fixes lix-project/lix#424
Change-Id: Iee793c79ba5a485d6606e0d292ed2eae6dfb7216
MAKEFLAGS hasn't been relevant since we switched off the Make
buildsystem and using the clang environment by default gives you clangd
by default which most developers will want.
Change-Id: I9c11d0613577047e6c908f049c1ffaca5fb5ff67
Turns errors like this:
let
throwMsg = a: throw (a + " invalid bar");
in throwMsg "bullshit"
error:
… from call site
at «string»:3:4:
2| throwMsg = a: throw (a + " invalid bar");
3| in throwMsg "bullshit"
| ^
… while calling 'throwMsg'
at «string»:2:14:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
error: bullshit invalid bar
into errors like this:
let
throwMsg = a: throw (a + " invalid bar");
in throwMsg "bullshit"
error:
… from call site
at «string»:3:4:
2| throwMsg = a: throw (a + " invalid bar");
3| in throwMsg "bullshit"
| ^
… while calling 'throwMsg'
at «string»:2:14:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
… caused by explicit throw
at «string»:2:17:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
error: bullshit invalid bar
Change-Id: I593688928ece20f97999d1bf03b2b46d9ac338cb
Turns errors like:
let
somepkg.src = throw "invalid foobar";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
error: invalid foobar
into errors like:
let
somepkg.src = throw "invalid foobar";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
… while evaluating 'somepkg.src' to select 'meta' on it
at «string»:3:4:
2| somepkg.src = throw "invalid foobar";
3| in somepkg.src.meta
| ^
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
error: invalid foobar
And for type errors, from:
let
somepkg.src = "I'm not an attrset";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = "I'm not an attrset";
| ^
3| in somepkg.src.meta
… while selecting an attribute
at «string»:3:4:
2| somepkg.src = "I'm not an attrset";
3| in somepkg.src.meta
| ^
error: expected a set but found a string: "I'm not an attrset"
into:
let
somepkg.src = "I'm not an attrset";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = "I'm not an attrset";
| ^
3| in somepkg.src.meta
… while selecting 'meta' on 'somepkg.src'
at «string»:3:4:
2| somepkg.src = "I'm not an attrset";
3| in somepkg.src.meta
| ^
error: expected a set but found a string: "I'm not an attrset"
For the low price of an enumerate() and a lambda you too can have the
incorrect line of code actually show up in the trace!
Change-Id: Ic1491c86e33c167891bdac9adad6224784760bd6
Turns errors like:
let
errpkg = throw "invalid foobar";
in errpkg.meta
error:
… while calling the 'throw' builtin
at «string»:2:12:
1| let
2| errpkg = throw "invalid foobar";
| ^
3| in errpkg.meta
error: invalid foobar
into errors like:
let
errpkg = throw "invalid foobar";
in errpkg.meta
error:
… while evaluating 'errpkg' to select 'meta' on it
at «string»:3:4:
2| errpkg = throw "invalid foobar";
3| in errpkg.meta
| ^
… while calling the 'throw' builtin
at «string»:2:12:
1| let
2| errpkg = throw "invalid foobar";
| ^
3| in errpkg.meta
error: invalid foobar
For the low price of one try/catch, you too can have the incorrect line
of code actually show up in the trace!
Change-Id: If8d6200ec1567706669d405c34adcd7e2d2cd29d
this gives about 20% performance improvements on pure parsing. obviously
it will be less on full eval, but depending on how much parsing is to be
done (e.g. including hackage-packages.nix or not) it's more like 4%-10%.
this has been tested (with thousands of core hours of fuzzing) to ensure
that the ASTs produced by the new parser are exactly the same as the old
one would have produced. error messages will change (sometimes by a lot)
and are not yet perfect, but we would rather leave this as is for later.
test results for running only the parser (excluding the variable binding
code) in a tight loop with inputs and parameters as given are promising:
- 40% faster on lix's package.nix at 10000 iterations
- 1.3% faster on nixpkgs all-packages.nix at 1000 iterations
- equivalent on all of nixpkgs concatenated at 100 iterations
(excluding invalid files, each file surrounded with parens)
more realistic benchmarks are somewhere in between the extremes, parsing
once again getting the largest uplift. other realistic workloads improve
by a few percentage points as well, notably system builds are 4% faster.
Benchmarks summary (from ./bench/summarize.jq bench/bench-*.json)
old/bin/nix --extra-experimental-features 'nix-command flakes' eval -f bench/nixpkgs/pkgs/development/haskell-modules/hackage-packages.nix
mean: 0.408s ± 0.025s
user: 0.355s | system: 0.033s
median: 0.389s
range: 0.388s ... 0.442s
relative: 1
new/bin/nix --extra-experimental-features 'nix-command flakes' eval -f bench/nixpkgs/pkgs/development/haskell-modules/hackage-packages.nix
mean: 0.332s ± 0.024s
user: 0.279s | system: 0.033s
median: 0.314s
range: 0.313s ... 0.361s
relative: 0.814
---
old/bin/nix --extra-experimental-features 'nix-command flakes' eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
mean: 6.133s ± 0.022s
user: 5.395s | system: 0.437s
median: 6.128s
range: 6.099s ... 6.183s
relative: 1
new/bin/nix --extra-experimental-features 'nix-command flakes' eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
mean: 5.925s ± 0.025s
user: 5.176s | system: 0.456s
median: 5.934s
range: 5.861s ... 5.943s
relative: 0.966
---
GC_INITIAL_HEAP_SIZE=10g old/bin/nix eval --extra-experimental-features 'nix-command flakes' --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
mean: 4.503s ± 0.027s
user: 3.731s | system: 0.547s
median: 4.499s
range: 4.478s ... 4.541s
relative: 1
GC_INITIAL_HEAP_SIZE=10g new/bin/nix eval --extra-experimental-features 'nix-command flakes' --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
mean: 4.285s ± 0.031s
user: 3.504s | system: 0.571s
median: 4.281s
range: 4.221s ... 4.328s
relative: 0.951
---
old/bin/nix --extra-experimental-features 'nix-command flakes' search --no-eval-cache github:nixos/nixpkgs/e1fa12d4f6c6fe19ccb59cac54b5b3f25e160870 hello
mean: 16.475s ± 0.07s
user: 14.088s | system: 1.572s
median: 16.495s
range: 16.351s ... 16.536s
relative: 1
new/bin/nix --extra-experimental-features 'nix-command flakes' search --no-eval-cache github:nixos/nixpkgs/e1fa12d4f6c6fe19ccb59cac54b5b3f25e160870 hello
mean: 15.973s ± 0.013s
user: 13.558s | system: 1.615s
median: 15.973s
range: 15.946s ... 15.99s
relative: 0.97
---
Change-Id: Ie66ec2d045dec964632c6541e25f8f0797319ee2
These are totally available and you can just turn them on, but they have
very bad dependency tracking and thus bloat incremental change times,
which is not really ok.
Change-Id: Iaa63ed18a789e74fcb757248cd24c3b194afcc80
This reverts commit 35eec921af.
Reason for revert: Regressed nix-eval-jobs, and it appears to be this change is buggy/missing a case. It just needs another pass.
Code causing the problem in n-e-j, when invoked with `nix-eval-jobs --flake '.#hydraJobs'`:
```
n-e-j/tests/assets » ../../build/src/nix-eval-jobs --meta --workers 1 --flake .#hydraJobs
warning: unknown setting 'trusted-users'
warning: `--gc-roots-dir' not specified
error: unsupported Git input attribute 'dir'
error: worker error: error: unsupported Git input attribute 'dir'
```
```
nix::Value *vRoot = [&]() {
if (args.flake) {
auto [flakeRef, fragment, outputSpec] =
nix::parseFlakeRefWithFragmentAndExtendedOutputsSpec(
args.releaseExpr, nix::absPath("."));
nix::InstallableFlake flake{
{}, state, std::move(flakeRef), fragment, outputSpec,
{}, {}, args.lockFlags};
return flake.toValue(*state).first;
} else {
return releaseExprTopLevelValue(*state, autoArgs, args);
}
}();
```
Inspecting the program behaviour reveals that `dir` was in fact set in the URL going into the fetcher. This is in turn because unlike in the case changed in this commit, it was not erased before handing it to libfetchers, which is probably just a mistake.
```
(rr) up
3 0x00007ffff60262ae in nix::fetchers::Input::fromURL (url=..., requireTree=requireTree@entry=true) at src/libfetchers/fetchers.cc:39
warning: Source file is more recent than executable.
39 auto res = inputScheme->inputFromURL(url, requireTree);
(rr) p url
$1 = (const nix::ParsedURL &) @0x7fffdc874190: {url = "git+file:///home/jade/lix/nix-eval-jobs",
base = "git+file:///home/jade/lix/nix-eval-jobs", scheme = "git+file", authority = std::optional<std::string> = {[contained value] = ""},
path = "/home/jade/lix/nix-eval-jobs", query = std::map with 1 element = {["dir"] = "tests/assets"}, fragment = ""}
(rr) up
4 0x00007ffff789d904 in nix::parseFlakeRefWithFragment (url=".#hydraJobs", baseDir=std::optional<std::string> = {...},
allowMissing=allowMissing@entry=false, isFlake=isFlake@entry=true) at src/libexpr/flake/flakeref.cc:179
warning: Source file is more recent than executable.
179 FlakeRef(Input::fromURL(parsedURL, isFlake), getOr(parsedURL.query, "dir", "")),
(rr) p parsedURL
$2 = {url = "git+file:///home/jade/lix/nix-eval-jobs", base = "git+file:///home/jade/lix/nix-eval-jobs", scheme = "git+file",
authority = std::optional<std::string> = {[contained value] = ""}, path = "/home/jade/lix/nix-eval-jobs", query = std::map with 1 element = {
["dir"] = "tests/assets"}, fragment = ""}
(rr) list
174
175 if (pathExists(flakeRoot + "/.git/shallow"))
176 parsedURL.query.insert_or_assign("shallow", "1");
177
178 return std::make_pair(
179 FlakeRef(Input::fromURL(parsedURL, isFlake), getOr(parsedURL.query, "dir", "")),
180 fragment);
181 }
```
Change-Id: Ib55a882eaeb3e59228857761dc1e3b2e366b0f5e
On operating systems where /bin/sh is not Bash, some scripts are invalid
because of bashisms, and building Lix fails with errors like this:
`render-manpage.sh: 3: set: Illegal option -o pipefail`
This modifies all scripts that use a `/bin/sh` shebang to `/usr/bin/env
bash`, including currently POSIX-compliant ones, to prevent any future
confusion.
Change-Id: Ia074cc6db42d40fc59a63726f6194ea0149ea5e0
I was working on nix-eval-jobs with a dev shell with some shenanigans to
run against a locally built Lix and it was getting really annoying when
`nix develop ../lix#` was messing up my other git repo's hooks.
This is a fix via blunt force, but it is at least obvious how it works.
Change-Id: Ia29eeb5be57ab6a2c88451c00ea18a51e4dfe65e
This is a squash of upstream PRs #10303, #10312 and #10883.
fix: Treat empty TMPDIR as unset
Fixes an instance of
nix: src/libutil/util.cc:139: nix::Path nix::canonPath(PathView, bool): Assertion `path != ""' failed.
... which I've been getting in one of my shells for some reason.
I have yet to find out why TMPDIR was empty, but it's no reason for
Nix to break.
(cherry picked from commit c3fb2aa1f9d1fa756dac38d3588c836c5a5395dc)
fix: Treat empty XDG_RUNTIME_DIR as unset
See preceding commit. Not observed in the wild, but is sensible
and consistent with TMPDIR behavior.
(cherry picked from commit b9e7f5aa2df3f0e223f5c44b8089cbf9b81be691)
local-derivation-goal.cc: Reuse defaultTempDir()
(cherry picked from commit fd31945742710984de22805ee8d97fbd83c3f8eb)
fix: remove usage of XDG_RUNTIME_DIR for TMP
(cherry picked from commit 1363f51bcb24ab9948b7b5093490a009947f7453)
tests/functional: Add count()
(cherry picked from commit 6221770c9de4d28137206bdcd1a67eea12e1e499)
Remove uncalled for message
(cherry picked from commit b1fe388d33530f0157dcf9f461348b61eda13228)
Add build-dir setting
(cherry picked from commit 8b16cced18925aa612049d08d5e78eccbf0530e4)
Change-Id: Ic7b75ff0b6a3b19e50a4ac8ff2d70f15c683c16a
The stdenv phases don’t actually do anything (at least not anymore),
and our justfile doesn’t behave the same as our docs.
This patch removes the stdenv phases from the docs, documents our
usage of just, and makes `just setup` heed `$mesonFlags`.
Fixes#413.
Fixes#414.
Change-Id: Ieb0b2a8ae420526238b5f9a73d7849ec6919995d
Following the latest hacking.md currently fails because of a missing
include in upstream editline. This patch fixes the build by adding
that missing include.
Fixes#410.
Change-Id: Iefd4cb687ed3da71ccda9fe9624f38e6ef4623e5
this was only used in one place, and that place has been rewritten to
use a temporary file instead. keeping this around is not very helpful
at this time, and in any case we'd be better off rewriting subprocess
handling in rust where we not only have a much safer library for such
things but also async frameworks necessary for this easily available.
Change-Id: I6f8641b756857c84ae2602cdf41f74ee7a1fda02
we want to remove runProgram's ability to provide stdin to a process
because the concurrency issues of handling both stdin and stdout are
much more pronounced once runProgram returns not is collected output
but a source. this is possible in the current c++ framework, however
it isn't necessary in almost all cases (as demonstrated by only this
single user existing) and in much better handled with a proper async
concurrency model that lets the caller handle both at the same time.
Change-Id: I29da1e1ad898d45e2e33a7320b246d5003e7712b
This is primarily for readability, but iwrc chaining std::string's
operator+ is also pretty scuffed performance-wise, and this was doing a
lot of operator+ chainging.
Change-Id: I9f25235df153eb2bbb491f1ff7ebbeed9a8ec985
copy-constructing or assigning from pid_t can easily lead to duplicate
Pid instances for the same process if a pid_t was used carelessly, and
Pid itself was copy-constructible. both could cause surprising results
such as killing processes twice (which could become very problemantic,
but luckily modern systems don't reuse PIDs all that quickly), or more
than one piece of the code believing it owns a process when neither do
Change-Id: Ifea7445f84200b34c1a1d0acc2cdffe0f01e20c6
this is only used in one place, and only to set a nicer error message on
EndOfFile. the only caller that actually *catches* this exception should
provide an error message in that catch block rather than forcing support
for setting error message so deep into the stack. copyStorePath is never
called outside of PathSubstitutionGoal anyway, which catches everything.
Change-Id: Ifbae8706d781c388737706faf4c8a8b7917ca278
LocalDerivationGoal includes a large number of low-level sandboxing
primitives for Darwin and Linux, intermingled with ifdefs.
Start creating platform-specific classes to make it easier to add new
platforms and review platform-specific code.
This change only creates support infrastructure and moves two function,
more functions will be moved in future changes.
Change-Id: I9fc29fa2a7345107d4fc96c46fa90b4eabf6bb89
This comes quite often when the available job slots on all remote
builders are exhausted and this is pretty spammy.
This isn't really an issue, but expected behavior.
A better way to display this is a nom-like approach where all scheduled
builds are shown in a tree and pending builds are being marked as such
IMHO.
Change-Id: I6bc14e6054f84e3eb0768127b490e263d8cdcf89
The original idea was to fix lix#174, but for a user friendly solution,
I figured that we'd need more consistency:
* Invalid query params will cause an error, just like invalid
attributes. This has the following two consequences:
* The `?dir=`-param from flakes will be removed before the URL to be
fetched is passed to libfetchers.
* The tarball fetcher doesn't allow URLs with custom query params
anymore. I think this was questionable anyways given that an
arbitrary set of query params was silently removed from the URL you
wanted to fetch. The correct way is to use an attribute-set
with a key `url` that contains the tarball URL to fetch.
* Same for the git & mercurial fetchers: in that case it doesn't even
matter though: both fetchers added unused query params to the URL
that's passed from the input scheme to the fetcher (`url2` in the code).
It turns out that this was never used since the query parameters were
erased again in `getActualUrl`.
* Validation happens for both attributes and URLs. Previously, a lot of
fetchers validated e.g. refs/revs only when specified in a URL and
the validity of attribute names only in `inputFromAttrs`.
Now, all the validation is done in `inputFromAttrs` and `inputFromURL`
constructs attributes that will be passed to `inputFromAttrs`.
* Accept all attributes as URL query parameters. That also includes
lesser used ones such as `narHash`.
And "output" attributes like `lastModified`: these could be declared
already when declaring inputs as attribute rather than URL. Now the
behavior is at least consistent.
Personally, I think we should differentiate in the future between
"fetched input" (basically the attr-set that ends up in the lock-file)
and "unfetched input" earlier: both inputFrom{Attrs,URL} entrypoints
are probably OK for unfetched inputs, but for locked/fetched inputs
a custom entrypoint should be used. Then, the current entrypoints
wouldn't have to allow these attributes anymore.
Change-Id: I1be1992249f7af8287cfc37891ab505ddaa2e8cd
Add the log-formats `multiline` and `multiline-with-logs` which offer
multiple current active building status lines.
Change-Id: Idd8afe62f8591b5d8b70e258c5cefa09be4cab03
If we've consumed the entire input, that doesn't actually mean we're
done decompressing - there might be more output left. This worked (?)
in most cases because the input and output sizes are pretty comparable,
but sometimes they're not and then things get very funny.
Change-Id: I73435a654a911b8ce25119f713b80706c5783c1b
I did a whole bunch of `git log -S` to find out exactly when all these
things were obsoleted and found the commit in which their usage was
removed, which I have added in either the error message or a comment.
I've also made *some* of the version checks into static asserts for when
we update the minimum supported protocol version.
In the end this is not a lot of code we are deleting, but it's code that
we will never have to support into the future when we build a protocol
bridge, which is why I did it. It is not in the support baseline.
Change-Id: Iea3c80795c75ea74f328cf7ede7cbedf8c41926b
without this we will not be able to get rid of makeDecompressionSink,
which in turn will be necessary to get rid of sourceToSink (since the
libarchive archive wrapper *must* be a Source due to api limitations)
Change-Id: Iccd3d333ba2cbcab49cb5a1d3125624de16bce27
don't consume a sink, return a source instead. the only reason to not do
this is a very slight reduction in dynamic allocations, but since we are
going to *at least* do disk io that will not be a lot of overhead anyway
Change-Id: Iae2f879ec64c3c3ac1d5310eeb6a85e696d4614a
if we want have getFile return a source instead of consuming a sink
we'll have to disambiguate this overload another way, eg like this.
Change-Id: Ia26de2020c309a37e7ccc3775c1ad1f32e0a778b
This happened during a PathSubstitutionGoal of a .drv file:
substitution of '/tmp/jade/nix-test/ca/eval-store/store/1lj7lsq5y0f25mfbnq6d3zd0bw5ay33n-dependencies-input-2.drv'
What happened here is that since PathSubstitutionGoal is not a
DerivationGoal, in production builds, the UB was not caught, since it
would early-exit from failing a dynamic_cast to DerivationGoal * on the
very next line, but before the null reference was ever used.
This was nonetheless UB. The fix should be to just rearrange the two
lines; I don't think there is a further bug there, since *substituting a
.drv* **necessarily** means you cannot have the representation of
the derivation as would be necessary for drv to not be null there.
Test failure:
++(eval-store.sh:12) _RR_TRACE_DIR=/home/jade/.local/share/rr rr record -- nix build -f dependencies.nix --eval-store /tmp/jade/nix-test/ca/eval-store/eval-store -o /tmp/jade/nix-test/ca/eval-store/result
don't know how to build these paths:
/tmp/jade/nix-test/ca/eval-store/store/6y51mf0p57ggipgab6hdjabbvplzsicq-dependencies-top.drv
copying 1 paths...
copying path '/tmp/jade/nix-test/ca/eval-store/store/8027afyvqb87y1sf5xhdkqsflqn1ziy8-dependencies.builder0.sh' to 'local'...
copying 1 paths...
copying path '/tmp/jade/nix-test/ca/eval-store/store/7r5pqyncvfgrryf9gzy1z56z3xigi61x-builder-dependencies-input-0.sh' to 'local'...
copying 1 paths...
copying path '/tmp/jade/nix-test/ca/eval-store/store/nhmgm87zlqy3ks96dxrn7l37b72azi99-builder-dependencies-input-1.sh' to 'local'...
copying 1 paths...
copying path '/tmp/jade/nix-test/ca/eval-store/store/nq4qa2j6y8ajqazlfq6h46ck637my1n6-builder-dependencies-input-2.sh' to 'local'...
copying 1 paths...
copying path '/tmp/jade/nix-test/ca/eval-store/store/6vh0vna9l5afck01y7iaks3hm9ikwqyj-builder-fod-input.sh' to 'local'...
building '/tmp/jade/nix-test/ca/eval-store/store/gy91pqymf2nc5v7ld1bad94xpwxdi25s-dependencies-input-0.drv'...
building '/tmp/jade/nix-test/ca/eval-store/store/w7wlkjx97ivmnrymkac5av3nyp94hzvq-dependencies-input-1.drv'...
../src/libstore/build/derivation-goal.cc:1556:22: runtime error: reference binding to null pointer of type 'Derivation'
0 0x734ba59a6886 in nix::DerivationGoal::waiteeDone(std::shared_ptr<nix::Goal>, nix::Goal::ExitCode) /home/jade/lix/lix2/build/src/libstore/build/derivation-goal.cc:1556:12
1 0x734ba59c0962 in nix::Goal::amDone(nix::Goal::ExitCode, std::optional<nix::Error>) /home/jade/lix/lix2/build/src/libstore/build/goal.cc:95:25
2 0x734ba5a1c44a in nix::PathSubstitutionGoal::done(nix::Goal::ExitCode, nix::BuildResult::Status, std::optional<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>>) /home/jade/lix/lix2/build/src/libstore/build/substitution-goal.cc:38:5
3 0x734ba5a1b454 in nix::PathSubstitutionGoal::init() /home/jade/lix/lix2/build/src/libstore/build/substitution-goal.cc:56:9
4 0x734ba5a2a6c6 in nix::Worker::run(std::set<std::shared_ptr<nix::Goal>, nix::CompareGoalPtrs, std::allocator<std::shared_ptr<nix::Goal>>> const&) /home/jade/lix/lix2/build/src/libstore/build/worker.cc:320:23
5 0x734ba59b93d8 in nix::Store::buildPathsWithResults(std::vector<nix::DerivedPath, std::allocator<nix::DerivedPath>> const&, nix::BuildMode, std::shared_ptr<nix::Store>) /home/jade/lix/lix2/build/src/libstore/build/entry-points.cc:60:12
6 0x734ba663c107 in nix::Installable::build2(nix::ref<nix::Store>, nix::ref<nix::Store>, nix::Realise, std::vector<nix::ref<nix::Installable>, std::allocator<nix::ref<nix::Installable>>> const&, nix::BuildMode) /home/jade/lix/lix2/build/src/libcmd/installables.cc:637:36
Change-Id: Id0e651e480bebf6356733b01bc639e9bb59c7bd0
This was generating an out-of-range verbosity value. We should just
process it as an int and then convert to verbosity with a clamping
function, which trivially avoids any domain type violations.
Change-Id: I0ed20da8e1496a1225ff3008b76827d99265d404
This is really just a question of turning off the production sanitizer
configuration so we get nice diagnostics. Not much else to say.
Change-Id: I76bd6d225320056ed95bd89955f00beff2db0d2f
We got UBSan working on Lix, so we of course immediately found a bug and
some definitely nonsense behaviour.
Accessing `pureEval` or `restrictEval` from a default setting value is
nonsense, since they would never be actually set by the time that value
is set so they are not going to do anything. The configuration is not
applied in an initializer (and even if it were, it's not going to be in
the right order).
After looking into *that*, we hunted down what actually was applying
these, since clearly this code did not do anything. The EvalState
constructor should have a "search path added and removed here :)" sign
on it, because that's where it is done. We added an explicit
initialization of the optional in there because it was otherwise unclear
why pureEval also has the search path to allowed paths setup code run.
We then realized that the `pureEval` documentation was *also* bogus, and
we rewrote it. In so doing, we realized that we forgot to file a bug to
make `builtins.storePath` work in pure eval mode, so we filed one of
those: lix-project/lix#402
Yaks have been thoroughly shorn.
UBSan report:
../src/libexpr/eval-settings.cc:66:10: runtime error: member call on address 0x752fa9a13060 which does not point to an object of type 'nix::BaseSetting<b
ool>'
0x752fa9a13060: note: object has invalid vptr
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
^~~~~~~~~~~~~~~~~~~~~~~
invalid vptr
0 0x752fa95106a6 in nix::EvalSettings::getDefaultNixPath[abi:cxx11]() /home/jade/lix/lix2/build/src/libexpr/eval-settings.cc:66:10
1 0x752fa950e420 in nix::EvalSettings::EvalSettings() /home/jade/lix/lix2/build/src/libexpr/eval-settings.hh:36:15
2 0x752fa9469f1f in __cxx_global_var_init.50 /home/jade/lix/lix2/build/src/libexpr/eval-settings.cc:98:14
3 0x752fa9469f1f in _GLOBAL__sub_I_eval_settings.cc /home/jade/lix/lix2/build/src/libexpr/eval-settings.cc
4 0x752fabbd308d in call_init (/nix/store/k7zgvzp2r31zkg9xqgjim7mbknryv6bs-glibc-2.39-52/lib/ld-linux-x86-64.so.2+0x508d) (BuildId: a5b8228edc9f16078ac3c894af964eeb990ecb4c)
5 0x752fabbd317b in _dl_init (/nix/store/k7zgvzp2r31zkg9xqgjim7mbknryv6bs-glibc-2.39-52/lib/ld-linux-x86-64.so.2+0x517b) (BuildId: a5b8228edc9f16078ac3c894af964eeb990ecb4c)
6 0x752fabbe9c2f in _dl_start_user (/nix/store/k7zgvzp2r31zkg9xqgjim7mbknryv6bs-glibc-2.39-52/lib/ld-linux-x86-64.so.2+0x1bc2f) (BuildId: a5b8228edc9f16078ac3c894af964eeb990ecb4c)
Change-Id: I5d8ffb7bfbe24b6584020ac74eed93d9f2e6d111
even the transfer function is not all that necessary since there aren't
that many users, but we'll keep it for now. we could've kept both names
but we also kind of want to use `download` for something else very soon
Change-Id: I005e403ee59de433e139e37aa2045c26a523ccbf
The lock usage was obviously wrong so it was entirely serialized. This
has the predicted speedups, the only question is whether it is sound
because it's exposing a bunch of new code to actual concurrency.
I did audit all the stores' queryPathInfoUncached implementations and
they all look *intended* to be thread safe, but whether that is actually
sound or not: lol lmao. I am highly confident in the s3 one because it
is calling s3 sdk methods that are thread safe and has no actual state.
Others are using Pool and look to be *supposed* to be thread safe, but
unsure if they actually are.
Change-Id: I0369152a510e878b5ac56c9ac956a98d48cd5fef
Found by looking for interesting asan reports from the test suite.
What happened here is that name got overwritten, but it was what
actually held the backing memory for the thing it got overwritten by,
which was a by-reference value coming out of std::regex.
Due to absurd reasons I cannot seem to use a string_view iterator here,
so I just copy the string with a longer lifetime instead. idk lol
==3796364==ERROR: AddressSanitizer: heap-use-after-free on address 0x503000014c61 at pc 0x74843523bf1d bp 0x7ffc68351330 sp 0x7ffc68350af0
READ of size 3 at 0x503000014c61 thread T0
0 0x74843523bf1c in __asan_memcpy (/nix/store/mzhqknx2mc94jdz4n320hn1lml86398y-clang-wrapper-17.0.6/resource-root/lib/linux/libclang_rt.asan-x86_64.so+0x159f1c)
1 0x6403cf6cbff4 in std::char_traits<char>::copy(char*, char const*, unsigned long) /nix/store/14c6s4xzhy14i2b05s00rjns2j93gzz4-gcc-13.2.0/include/c++/13.2.0/bits/char_traits.h:445:33
<...>
7 0x6403cf6cbff4 in std::__cxx11::sub_match<__gnu_cxx::__normal_iterator<char const*, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>>>::str() const /nix/store/14c6s4xzhy14i2b05s00rjns2j93gzz4-gcc-13.2.0/include/c++/13.2.0/bits/regex.h:966:6
8 0x6403cf6cbff4 in std::__cxx11::sub_match<__gnu_cxx::__normal_iterator<char const*, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>>>::operator std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>() const /nix/store/14c6s4xzhy14i2b05s00rjns2j93gzz4-gcc-13.2.0/include/c++/13.2.0/bits/regex.h:955:16
9 0x6403cf6cbff4 in nix::getClosureInfo[abi:cxx11](nix::ref<nix::Store>, nix::StorePath const&) /home/jade/lix/lix2/build/src/nix/diff-closures.cc:37:26
10 0x6403cf6cd70c in nix::printClosureDiff(nix::ref<nix::Store>, nix::StorePath const&, nix::StorePath const&, std::basic_string_view<char, std::char_traits<char>>) /home/jade/lix/lix2/build/src/nix/diff-closures.cc:54:25
11 0x6403cf873331 in CmdProfileDiffClosures::run(nix::ref<nix::Store>) /home/jade/lix/lix2/build/src/nix/profile.cc:479:17
<...>
0x503000014c61 is located 17 bytes inside of 21-byte region [0x503000014c50,0x503000014c65)
freed by thread T0 here:
0 0x748435250470 in operator delete(void*) (/nix/store/mzhqknx2mc94jdz4n320hn1lml86398y-clang-wrapper-17.0.6/resource-root/lib/linux/libclang_rt.asan-x86_64.so+0x16e470)
<...>
6 0x6403cf6cbda2 in std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>::~basic_string() /nix/store/14c6s4xzhy14i2b05s00rjns2j93gzz4-gcc-13.2.0/include/c++/13.2.0/bits/basic_string.h:792:9
7 0x6403cf6cbda2 in nix::getClosureInfo[abi:cxx11](nix::ref<nix::Store>, nix::StorePath const&) /home/jade/lix/lix2/build/src/nix/diff-closures.cc:36:13
8 0x6403cf6cd70c in nix::printClosureDiff(nix::ref<nix::Store>, nix::StorePath const&, nix::StorePath const&, std::basic_string_view<char, std::char_traits<char>>) /home/jade/lix/lix2/build/src/nix/diff-closures.cc:54:25
<...>
previously allocated by thread T0 here:
0 0x74843524fa38 in operator new(unsigned long) (/nix/store/mzhqknx2mc94jdz4n320hn1lml86398y-clang-wrapper-17.0.6/resource-root/lib/linux/libclang_rt.asan-x86_64.so+0x16da38)
<...>
9 0x6403cf6cb68c in std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>::basic_string<std::basic_string_view<char, std::char_traits<char>>, void>(std::basic_string_view<char, std::char_traits<char>> const&, std::allocator<char> const&) /nix/store/14c6s4xzhy14i2b05s00rjns2j93gzz4-gcc-13.2.0/include/c++/13.2.0/bits/basic_string.h:784:4
10 0x6403cf6cb68c in nix::getClosureInfo[abi:cxx11](nix::ref<nix::Store>, nix::StorePath const&) /home/jade/lix/lix2/build/src/nix/diff-closures.cc:33:21
11 0x6403cf6cd70c in nix::printClosureDiff(nix::ref<nix::Store>, nix::StorePath const&, nix::StorePath const&, std::basic_string_view<char, std::char_traits<char>>) /home/jade/lix/lix2/build/src/nix/diff-closures.cc:54:25
12 0x6403cf873331 in CmdProfileDiffClosures::run(nix::ref<nix::Store>) /home/jade/lix/lix2/build/src/nix/profile.cc:479:17
<...>
Change-Id: I9c408cf2a3d3155f9f7b2ad4848ee6c741331db0
There was a previously-unused move constructor that just called abort,
which makes no sense since it ought to just be `= delete` if you don't
want one (commit history says it was Eelco doing an optimistic
performance optimisation in 2016, so it probably would not pass review
today).
However, a Lock has some great reasons to be moved! You might need to
unlock it early, for instance, or give it to someone else. So we change
the move constructor to instead hollow out the moved-from object and
make it unusable.
Change-Id: Iff2a4c2f7ebd0a558c4866d4dfe526bc8558bed7
Unfetched submodules are included as empty directories in archives, so they end
up as such in the store when fetched in clean mode. Make sure the same happens
in dirty mode too. Fortunately, they are already correctly represented in the
ls-files output, so we just need to make sure to include the empty directory in
our filter.
Fixes: https://github.com/NixOS/nix/issues/6247
Change-Id: I60d06ff360cfa305d081b920838c893c06da801c
* changes:
libstore client: remove remaining dead code
libstore: refuse to serialise ancient protocols
libstore client: remove support for <2.3 clients
libstore daemon: remove very old protocol support (<2.3)
Delete old ValidPathInfo test, fix UnkeyedValidPathInfo
Set up minimum protocol version
with the prepatory work done this mostly means turning plain pointers
into unique_ptrs, with all the associated churn that necessitates. we
might want to change some of these to box_ptrs at some point as well,
but that would be a semantic change that isn't fully appropriate yet.
Change-Id: I0c238c118617420650432f4ed45569baa3e3f413
almost all places where Exprs are passed as pointers expect the pointers
to be non-null. pass them as references to encode this constraint in the
type system as well (and also communicate that Exprs must not be freed).
Change-Id: Ia98f166fec3c23151f906e13acb4a0954a5980a2
now that destructors are hooked up we want to give the C skeleton every
real chance to actually run them. since bison does not call destructors
on values that have been passed to semantic actions even when an action
causes an abort we will also have to delete some things manually still.
Change-Id: Ia22bdaa9e969b74e17a6c496e35e6c2d86b7d750
this doesn't help much yet since the state objects themselves also leak
all memory they are given, but it is a first necessary step to properly
managing parser memory. notably we have to clear $$ when returning from
the parser since even the start symbol is subject to automatic deletion
by the bison-generated parser before returning control to the call site
Change-Id: I80245b0c747308e80923e7f18ce4e1a4898f93b0
This uses a minor hack in which we check the rl_line_buffer global
variable to workaround editline not including the colon in its
completion callback.
Fixes#361
Change-Id: Id159d209c537443ef5e37a975982e8e12ce1f486
The UnkeyedValidPathInfo test was testing an ancient version but not the
current version. Doesn't make much sense to me.
Change-Id: Ib476a4297d9075f2dcd31a073b3e7b149b2189af
Well that is embarrassing. I think the proper thing is to just quickly
ship a -rc2, so I will open a backport of this.
$ curl https://releases.lix.systems/manifest.nix
# This file was generated by releng/create_release.xsh in Lix
{
aarch64-linux = "/nix/store/mrbknq000af7iaqhk53bnpk1fvfrc1xp-lix-2.90.0-rc1";
aarch64-darwin = "/nix/store/z1bdccwsk34iv491aygh0mm1lgpf7yy1-lix-2.90.0-rc1";
x86_64-darwin = "/nix/store/xqvfpdhzck44v6kyhgi9f8v0xybksb6a-lix-2.90.0-rc1";
x86_64-linux = "/nix/store/h2ml0nx4477r84y82jgm8y80jpr72gqw-lix-release-tarballs";
}
Change-Id: I9cf007c850c2faf995a3a9d92457517b8501d1a1
* changes:
Change error messages about 'invalid paths' to 'path does not exist'.
Add a clearer error message for InvalidPathError during evaluation
Harmonise the Store::queryPathInfoUncached interface
This:
- Consistently returns `nullptr` for a non-existent
store path, instead of a mix of `nullptr` and
throwing exceptions.
- If a store returns "bad" store paths in response
to a request (e.g. incorrect hash or name), don't
cache this result. This removes some duplication
of code at the cache-access layer of queryPathInfo()
checking this, and allows us to provide more
specific errors.
Part of #270.
Change-Id: I86612c6499b1a37ab872c712c2304d6a3ff19edb
This adds the nix executable as an input argument to the custom targets
that build the manual (HTML, and the man pages), so that changes to
things like src/nix/nix.md cause the correct rebuilds
Change-Id: Iffaa2c14acbfc721caef7b8cae9b53ecd365f26d
FreeBSD uses libunwind unwind.h, which does not require
`_GNU_SOURCE` to expose `_Unwind_Backtrace`.
Tell Boost that.
Change-Id: I81e767967b1458118b86d212b5552d4d0a1200d9
This commit constitutes the branch-off for 2.91. The parent of this
commit will be the branch point for release-2.90.
Change-Id: I7f047545df29a9cff93346137c865dcbf1415488
For now we just need to put the release notes in the final spot. We will
have to fix the date on both 2.90 and 2.91 branches, but such as it is.
Release created with releng/create_release.xsh
Closes: lix-project/lix#318
Change-Id: I38e79b40e7f632c8a286f2f09865a84dc93eca90
This merge commit returns to the previous state prior to the release but leaves the tag in the branch history.
Release created with releng/create_release.xsh
Change-Id: I92296a1746b54a081004fe2bb23e9e37fd33b3e5
* changes:
releng: add sha256 for the manual tarball
releng: fix upload of multiarch images to forgejo
releng: fix git checking
releng: fix logging inside interactive xonsh
releng: support multiple systems
version: update to 2.90.0-rc1
Forgejo appears to immediately delete registry content that is
overwritten. This means that we are forced to delete our previous
workaround of making a temporary tag and use a new, more absurd
workaround of making an entire temporary image that we basically only
need to create to get its hash.
However, on the plus side, the new workaround doesn't create garbage
tags to begin with, which means that we don't have to deal with GitHub
not implementing the standardized tag delete endpoint and instead
only implementing a proprietary one.
Upstream-Bug: https://github.com/containers/skopeo/issues/2354
Change-Id: I220e7ce9a17fd230c38882f12c009a166dcc9336
I don't know when this broke, it seems like it happened since the 24.05
upgrade, so xonsh 0.15.
What happened is that xonsh was trying to intercept log output, which
explodes if you have the logger survive past one command input. This is,
however, impossible to avoid if you are trying to use logging when you
import releng from inside xonsh for interactive use!
The error below is because the memory handler backing the stdout/stderr
of the one command that's just been run was closed after the command
completed.
Change-Id: I2be642aebf93da9818d08ff8b97c2e72ba5ac581
--- Logging error ---
Traceback (most recent call last):
File "/nix/store/7hnr99nxrd2aw6lghybqdmkckq60j6l9-python3-3.11.9/lib/python3.11/logging/__init__.py", line 1113, in emit
stream.write(msg + self.terminator)
File "/nix/store/34951j60xcsw6zj4v8lsaf491acv0by3-python3-3.11.9-env/lib/python3.11/site-packages/xonsh/base_shell.py", line 183, in write
self.mem.write(s)
ValueError: I/O operation on closed file.
Call stack:
File "/nix/store/xgdp1p1gv8ni1awnkzyqasnn6gz5wlvx-xonsh-0.15.1/bin/xonsh", line 8, in <module>
sys.exit(main())
File "/nix/store/34951j60xcsw6zj4v8lsaf491acv0by3-python3-3.11.9-env/lib/python3.11/site-packages/xonsh/main.py", line 470, in main
sys.exit(main_xonsh(args))
File "/nix/store/34951j60xcsw6zj4v8lsaf491acv0by3-python3-3.11.9-env/lib/python3.11/site-packages/xonsh/main.py", line 514, in main_xonsh
shell.shell.cmdloop()
File "/nix/store/34951j60xcsw6zj4v8lsaf491acv0by3-python3-3.11.9-env/lib/python3.11/site-packages/xonsh/ptk_shell/shell.py", line 406, in cmd
loop
line = self.singleline(auto_suggest=auto_suggest)
File "/nix/store/34951j60xcsw6zj4v8lsaf491acv0by3-python3-3.11.9-env/lib/python3.11/site-packages/xonsh/ptk_shell/shell.py", line 374, in sin
gleline
line = self.prompter.prompt(**prompt_args)
File "/nix/store/34951j60xcsw6zj4v8lsaf491acv0by3-python3-3.11.9-env/lib/python3.11/site-packages/prompt_toolkit/shortcuts/prompt.py", line 1
026, in prompt
return self.app.run(
File "/nix/store/34951j60xcsw6zj4v8lsaf491acv0by3-python3-3.11.9-env/lib/python3.11/site-packages/prompt_toolkit/application/application.py",
line 1002, in run
return asyncio.run(coro)
File "/nix/store/7hnr99nxrd2aw6lghybqdmkckq60j6l9-python3-3.11.9/lib/python3.11/asyncio/runners.py", line 189, in run
with Runner(debug=debug) as runner:
File "/nix/store/7hnr99nxrd2aw6lghybqdmkckq60j6l9-python3-3.11.9/lib/python3.11/asyncio/runners.py", line 59, in __enter__
self._lazy_init()
File "/nix/store/7hnr99nxrd2aw6lghybqdmkckq60j6l9-python3-3.11.9/lib/python3.11/asyncio/runners.py", line 137, in _lazy_init
self._loop = events.new_event_loop()
File "/nix/store/7hnr99nxrd2aw6lghybqdmkckq60j6l9-python3-3.11.9/lib/python3.11/asyncio/events.py", line 810, in new_event_loop
return get_event_loop_policy().new_event_loop()
File "/nix/store/7hnr99nxrd2aw6lghybqdmkckq60j6l9-python3-3.11.9/lib/python3.11/asyncio/events.py", line 699, in new_event_loop
return self._loop_factory()
File "/nix/store/7hnr99nxrd2aw6lghybqdmkckq60j6l9-python3-3.11.9/lib/python3.11/asyncio/unix_events.py", line 64, in __init__
super().__init__(selector)
File "/nix/store/7hnr99nxrd2aw6lghybqdmkckq60j6l9-python3-3.11.9/lib/python3.11/asyncio/selector_events.py", line 54, in __init__
logger.debug('Using selector: %s', selector.__class__.__name__)
Message: 'Using selector: %s'
Arguments: ('EpollSelector',)
Change-Id: I90959809129aaf96aad4577599031688599ed85e
This is motivated by flakes being bad and all the stuff that calls
things by "system" being utterly unable to cope with cross compilation.
So if we go shove it in package.nix it is suddenly usable from cross
contexts.
Usage:
```
nix build -L .#nix-riscv64-linux.binaryTarball
```
Change-Id: I702ebf2ac5bd9d1c57662f968b000073134df336
It builds. I have not tested the binaries since I don't have hardware,
but I would be rather surprised if it were broken, given that nix *runs*
on this platform.
Change-Id: I0b474ffcd4a431bf117a303d0b65fa6532113f48
There were two bugs I found:
1. If the build isn't already done in the store, nix-store --realise
does not know how to build it. You have to just give it the
derivation and I guess it will realise all outputs, which is fine.
2. cp without -T will not overwrite an existing manual directory,
creating a path manual/manual.
Change-Id: Ibebfd136a266da5330944a985e636ebb776f1909
This seems to have been caused by having the wrong PID. I don't know why
it worked before in the sandbox, but the code was definitely wrong
before, so let's just fix it.
Change-Id: I556580bdf614c716566310e975a36daa6d6c9a91
This was originally going to be just the testsuite but I kinda just
documented all of them.
I am tired of us not documenting these. This is a starting point to
producing an actually good index. I would like to enforce it in a
pre-commit hook eventually that we document all environment variables
used in Lix itself, even if it is terse dev facing docs.
This is full of a bunch of TODOs caused by auditing code. They should
probably be done at some point.
Change-Id: I7c0d3b257e19bae23d47d1efbd7361d203bccb0e
It's in the security section, and it was totally outdated anyway.
I took the opportunity to write down the stuff we already believed.
Change-Id: I73e62ae85a82dad13ef846e31f377c3efce13cb0
Followup to https://gerrit.lix.systems/c/lix/+/1417 to ensure that this
parser will never take something that doesn't look like a version.
It turns out this problem is less alarming than initially thought
because it only applies to the testsuite in a non-default mode.
Change-Id: I26aba24aaf0215f2b782966314b94784db766266
We should not let these regress in CI by having broken dependencies or
similar. Still need to fix the evaluation error checking in
buildbot-nix, but this is a useful step regardless.
Fixes: lix-project/lix#383
Change-Id: I3883184165440e66256c989117f2ab2e54c3aafd
-- message from cl/1418 --
The boehmgc changes are bundled into this commit because doing otherwise
would require an annoying dance of "adding compatibility for < 8.2.6 and
>= 8.2.6" then updating the pin then removing the (now unneeded)
compatibility. It doesn't seem worth the trouble to me given the low
complexity of said changes.
Rebased coroutine-sp-fallback.diff patch taken from https://github.com/NixOS/nixpkgs/pull/317227
-- jade resubmit changes --
This is a resubmission of https://gerrit.lix.systems/c/lix/+/1418, which
was reverted in https://gerrit.lix.systems/c/lix/+/1432 for breaking CI
evaluation without being detected.
I have run `nix flake check -Lv` on this one before submission and it
passes on my machine and crucially without eval errors, so the CI result
should be accurate.
It seems like someone renamed forbiddenDependenciesRegex to
forbiddenDependenciesRegexes in nixpkgs and also changed the type
incompatibly. That's pretty silly, but at least it's just an eval error.
Also, `xonsh` regressed the availability of `xonsh-unwrapped`, but it
was fixed by us in https://github.com/NixOS/nixpkgs/pull/317636, which
is now in our channel, so we update nixpkgs compared to the original
iteration of this to simply get that.
We originally had a regression related to some reorganization of the
nixpkgs lib test suite in which there was broken parameter passing.
This, too, we got quickfixed in nixpkgs, so we don't need any changes
for it: https://github.com/NixOS/nixpkgs/pull/317772
Related: https://gerrit.lix.systems/c/lix/+/1428
Fixes: lix-project/lix#385
Change-Id: I26d41ea826fec900ebcad0f82a727feb6bcd28f3
The libcmd unit test creates files (more specifically, the fetcher cache) in
its home directory. In the single-user sandbox, this leads to the creation of
/homeless-shelter, since this is the default HOME and the root is writable.
Unfortunately, this conflicts with the assumption of the functional tests that
this directory does not exist. Use a different home directory to prevent these
test failures, and thus restore the ability to build inside the single-user
sandbox.
Fixes: lix-project/lix#365
Change-Id: I4df8c53d043234b95a7c0ac45fc5ee89e8d46aff
* changes:
releng: add prod environment, ready for release
releng: automatically figure out if we should tag latest for docker
releng: support multiarch docker images
manual: rewrite the docker guide now that we have images
Rewrite docker to be sensible and smaller
Implement docker upload in the releng tools
I am *reasonably* confident that this releng infrastructure can actually
build a Lix 2.90 and release it successfully. Let's make it possible to
do, and add some cute colours to the confirmation message.
Change-Id: I85e498b6fb49ffc5e75c0a72c5e45fb1f69030d3
For example, when releasing from release-2.90, if `main` has a 2.91 tag
ancestor, we know that 2.91 was released, so we should *not* tag latest.
Change-Id: Ia56b17a2ee03bbec74b7c271c742858c690d450d
If we don't want to have separate registry tags by architecture (EWWWW),
we need to be able to build multiarch docker images. This is pretty
simple, and just requires making a manifest pointing to each of the
component images.
I was *going* to just do this API prodding with manifest-tool, but it
doesn't support putting metadata on the outer manifest, which is
actually kind of a problem because it then doesn't render the metadata
on github. So I guess we get a simple little containers API
implementation that is 90% auth code.
Change-Id: I8bdd118d4cbc13b23224f2fb174b232432686bea
I have checked the image can build things and inspected `diff -ru`
compared to the old image. As far as I can tell it is more or less
the same besides the later git change.
Layers are now 65MB or less, and we aren't against the maxLayers limit
for the broken automatic layering to do anything but shove one store
path in a layer (which is good behaviour, actually).
This uses nix2container which streams images, so the build time is much
shorter.
I have also taken the opportunity to, in addition to fixing the 400MB
single layer (terrible, and what motivated this in the first place),
delete about 200MB of closure size inflicted by git vs gitMinimal
causing both perl and python to get into closure.
People mostly use this thing for CI, so I don't really think you need
advanced git operations, and large git can be added at the user side if
really motivated.
With love for whichever container developer somewhat ironically assumed
that one would not run skopeo in a minimal container that doesn't have a
/var/tmp.
Fixes: lix-project/lix#378
Change-Id: Icc3aa20e64446276716fbbb87535fd5b50628010
The boehmgc changes are bundled into this commit because doing otherwise
would require an annoying dance of "adding compatibility for < 8.2.6 and
>= 8.2.6" then updating the pin then removing the (now unneeded)
compatibility. It doesn't seem worth the trouble to me given the low
complexity of said changes.
Rebased coroutine-sp-fallback.diff patch taken from https://github.com/NixOS/nixpkgs/pull/317227
Change-Id: I8c590e9fe25c0f566d0cfeacb96d8cf50abf12e8
4b128008c5d9fde881ce1b0a25e60ae0415a14d5 in nixpkgs introduced a default
hashedPasswordFile for root in NixOS tests, which takes precedence over
the password option set in the nix-copy test.
Change-Id: Iffaebec5992e50614b854033f0d14312c8d275b5
Since ad8a4b380e, the version printer returns "nix (Lix, like Nix) 2.x",
hence the `daemonVersion` was being set to the string "like".
Using `compareVersions` with a letter compares them lexicographically:
builtins.compareVersions "like" "2.12pre20230103" // => -1
builtins.compareVersions "like" "2.16.0" // => -1
This caused that `isDaemonNewer` always returned 1, falsy in Bash terms.
Therefore, the test suite skipped those tests where they use it.
Fixes lix-project/lix#324
Change-Id: If6682515bf0bf8b8add641af9a4e98b50a9acb51
This can release x86_64-linux binaries to staging, with ephemeral keys.
I think it's good enough to review at least at this point, so we don't
keep adding more stuff to it to make it harder to review.
Change-Id: Ie95e8f35d1252f5d014e819566f170b30eda152e
We realized that there's really no good place to put these dev facing
bulletins, and the user-facing release notes aren't really the worst
place to put them, I guess, and we do kind of hope that it converts
users to devs.
Change-Id: Id9387b2964fe291cb5a3f74ad6344157f19b540c
clangd seems to break if GCC is using precompiled headers for C++'s
standard library, so this sets -Denable-pch-std=${stdenv.cc.isClang}
Fixes#374.
Change-Id: Ic4be41ebe7576ebcb9c208275596f953c2003109
They are enabled by default, and Meson will also prints whether or not
they're enabled at the bottom at the end of configuration.
Change-Id: I48db238510bf9e74340b86f243f4bbe360794281
Fixes a compiler error that looks like:
error: could not convert '[...]' from 'future<void>' to 'future<nix::FileTransferResult>'
Change-Id: I4aeadfeba0dadfdf133f25e6abce90ede7a86ca6
In most real world cases, the Link header is set on the redirect, not on
the final file. This regressed in Lix earlier and while new unit tests
were added to cover it, this integration test should probably have also
caught it.
Change-Id: I2a9d8d952fff36f2c22cfd751451c2b523f7045c
This reverts commit d0390b5cf2.
Other parts of the codebase will need to be adjusted in response to a
default verbosity change. Let's just push this to after 2.90.
Fixes#362.
Fixes#367.
Change-Id: I04648473579146851bda41d764adc1ef954c355d
Here's my guide so far:
$ rg '((?!(recursive).*) Nix
(?!(daemon|store|expression|Rocks!|Packages|language|derivation|archive|account|user|sandbox|flake).*))'
-g '!doc/' --pcre2
All items from this query have been tackled. For the documentation side:
that's for lix-project/lix#162.
Additionally, all remaining references to github.com/NixOS/nix which
were not relevant were also replaced.
Fixes: lix-project/lix#148.
Fixes: lix-project/lix#162.
Change-Id: Ib3451fae5cb8ab8cd9ac9e4e4551284ee6794545
Signed-off-by: Raito Bezarius <raito@lix.systems>
This causes libstore, libexpr, libfetchers, and libutil to be linked
with -Wl,--whole-archive to executables, when building statically.
libstore for the store backends, libexpr for the primops, libfetchers
for the fetcher backends I assume(?), and libutil for the nix::logger
initializer (which notably shows in pre-main constructors when HOME is
not owned by the user. cursed.).
This workaround should be removed when #359 is fixed.
Fixes#306.
Change-Id: Ie9ef0154e09a6ed97920ee8ab23810ca5e2de84c
Fixes: lix-project/lix#157
Fixes: lix-project/lix#221
Previously the entire escaped store URI was included. This would cause
build failures if a very long or deeply nested path was being used in
the store.
Now, we use the first 48 characters of the URL (escaped), then 16 bytes
of hash of the entire URL. This should never collide and limits the
length of the file name to a bit over 64, which is fine.
Change-Id: Ic1ba690a94e83749567c2c29460b8d1bcf2ac413
This is because a dynamic_cast<nix::RootArgs *> of a (n-e-j) MyArgs
returns nullptr even though MyArgs has virtual nix::RootArgs as a
parent.
class MyArgs : virtual public nix::MixEvalArgs,
virtual public nix::MixCommonArgs,
virtual nix::RootArgs { ... };
So this should work right?? But it does not. We found out that it's
caused by -fvisibility=hidden in n-e-j, but honestly this code was bad
anyway.
The trivial solution is to simply stop relying on RTTI working properly
here, which is probably better OO architecture anyway. However, I am not
100% confident *this* is sound, since we have this horrible hierarchy:
Args (defines getRoot)
/ | \
RootArgs MixCommonArgs MixEvalArgs
(overrides)
I am not confident that this is guaranteed to resolve from Args always
in the case of this override.
Assertion failed: (res), function getRoot, file src/libutil/args.cc, line 67.
6MyArgsProcess 60503 stopped
* thread #1, queue = 'com.apple.main-thread', stop reason = hit program assert
frame #4: 0x0000000100b1a41c liblixutil.dylib`nix::Args::processArgs(std::__1::list<std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char>>, std::__1::allocator<std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char>>>> const&, bool) [inlined] nix::Args::getRoot(this=0x00000001000d0688) at args.cc:67:5 [opt]
64 std::cout << typeid(*p).name();
65
66 auto * res = dynamic_cast<RootArgs *>(p);
-> 67 assert(res);
68 return *res;
69 }
70
Target 0: (nix-eval-jobs) stopped.
(lldb) p this
(MyArgs *) 0x00000001000d0688
(lldb) p *this
(nix::Args) {
longFlags = size=180 { ... }
shortFlags = size=4 { ... }
expectedArgs = size=1 { ... }
processedArgs = size=0 {}
hiddenCategories = size=1 {
[0] = "Options to override configuration settings"
}
parent = nullptr
}
We also found that if we did this:
class [[gnu::visibility("default")]] RootArgs : virtual public Args
it would work properly (???!). This is of course, very strange, because
objdump -Ct output on liblixexpr.dylib is identical both with and
without it.
Possibly related: https://www.qt.io/blog/quality-assurance/one-way-dynamic_cast-across-library-boundaries-can-fail-and-how-to-fix-it
Fixes: lix-project/nix-eval-jobs#2
Change-Id: I6b9ed968ed56420a9c4d2dffd18999d78c2761bd
It seems like someone implemented precompiled headers a long time ago
and then it never got ported to meson or maybe didn't work at all.
This is, however, blessedly easy to simply implement. I went looking for
`#define` that could affect the result of precompiling the headers, and
as far as I can tell we aren't doing any of that, so this should truly
just be free build time savings.
Previous state:
Compilation (551 times):
Parsing (frontend): 1302.1 s
Codegen & opts (backend): 956.3 s
New state:
**** Time summary:
Compilation (567 times):
Parsing (frontend): 1123.0 s
Codegen & opts (backend): 1078.1 s
I wonder if the "regression" in codegen time is just doing the PCH
operation a few times, because meson does it per-target.
Change-Id: I664366b8069bab4851308b3a7571bea97ac64022
Before:
$ nix flake lock --override-input nixpkgs gitlab:simple-nixos-mailserver/nixos-mailserver/nonexistent
fetching git input 'git+file:///home/linus/projects/lix'
fetching gitlab input 'gitlab:simple-nixos-mailserver/nixos-mailserver/nonexistent'
error: [json.exception.type_error.302] type must be string, but is null
After:
$ outputs/out/bin/nix flake lock --override-input nixpkgs gitlab:simple-nixos-mailserver/nixos-mailserver/nonexistent
fetching git input 'git+file:///home/linus/projects/lix'
fetching gitlab input 'gitlab:simple-nixos-mailserver/nixos-mailserver/nonexistent'
error:
… while updating the lock file of flake 'git+file:///home/linus/projects/lix?ref=refs/heads/fix-gitlab-nonexistent&rev=915f16a619a36237a099b9aa9afed6d14ff613b4'
… while updating the flake input 'nixpkgs'
… while fetching the input 'gitlab:simple-nixos-mailserver/nixos-mailserver/nonexistent'
error: No commits returned by GitLab API -- does the ref really exist?
Change-Id: Id9bc79d98348500e152ed519bb3ac79a3d15c38d
This reverts commit 285bc67318.
Reason for revert: lix-project/lix#364
For some reason this broke `main` even though the change we are reverting passed CI! Mysterious, haunted, etc. Needs more debugging, let's turn it off for now.
Change-Id: Ica4819d61cd35b83eb52985bfcb657e858f025a9
If our shellHook is being run from a nested nix-shell (see 7a12bc200¹),
then (I think) it is run from a bash function due to the nesting, then
`return` is correct. If its `eval`'d though, then there isn't really a
correct way to early exit. So we can just unconditionally be executed in
a function.
Basically, we have IIFE at home.
[1]: 7a12bc2007
Change-Id: Iacad25cbbf66cde2911604e6061e56ad6212af7e
We reviewed this code a while ago, and we neglected to get a comment in
saying why it's Like This at the time. Let's fix that, since it is code
that looks very absurd at first glance.
Change-Id: Ib67b49605ef9ef1c84ecda1db16be74fc9105398
* changes:
util.hh: Delete remaining file and clean up headers
util.hh: Move nativeSystem to local-derivation-goal.cc
util.hh: Move stuff to types.hh
util.cc: Delete remaining file
util.{hh,cc}: Move ignoreException to error.{hh,cc}
util.{hh,cc}: Split out namespaces.{hh,cc}
util.{hh,cc}: Split out users.{hh,cc}
util.{hh,cc}: Split out strings.{hh,cc}
util.{hh,cc}: Split out unix-domain-socket.{hh,cc}
util.{hh,cc}: Split out child.{hh,cc}
util.{hh,cc}: Split out current-process.{hh,cc}
util.{hh,cc}: Split out processes.{hh,cc}
util.{hh,cc}: Split out file-descriptor.{hh,cc}
util.{hh,cc}: Split out file-system.{hh,cc}
util.{hh,cc}: Split out terminal.{hh,cc}
util.{hh,cc}: Split out environment-variables.{hh,cc}
Folding by default would prevent things like "Ctrl+F for nix-env" from
working trivially, but the user should be able to fold if they want to.
Change-Id: I5273272289f0f24e1f040c691580acfe33f66bd4
while refactoring the curl wrapper we inadvertently broken the immutable
flake protocol, because the immutable flake protocol accumulates headers
across the entire redirect chain instead of using only the headers given
in the final response of the chain. this is a problem because Some Known
Providers Of Flake Infrastructure set rel=immutable link headers only in
the penultimate entry of the redirect chain, and curl does not regard it
as worth returning to us via its response header enumeration mechanisms.
fixes lix-project/lix#358
Change-Id: I645c3932b465cde848bd6a3565925a1e3cbcdda0
Documents some of the weirdness of __curPos and the or keyword.
This does not fit well into any existing section for either of
them, though the use of or as a quasi-operator is mentioned in
the section on operators.
Addresses lix-project/lix#353
Change-Id: I7c906c8368843dca6944e8b22573b6d201cd9a76
grepQuietInvert is a typo introduced by c11836126b.
The test functional-timeout was failing silently because Bash considered
the command-not-found error as truthy.
Change-Id: Ic13829d02ec55d6ecd63a0f4d34ec0d32379609f
If a nested nix-shell is run inside a nix-shell, then the outer shell's
shellHook will be passed through and run again, unless the nested shell
defines its own.
With lix's hook, this can be annoying: forgetting to exit its nix-shell,
cd'ing to another repository & entering a nested nix-shell will happily
install lix's pre-commit hook in it.
This change makes lix's hook return early in such cases.
Change-Id: I91cb6eb6668f3a8eace36ecbdb01eb367861d77b
According to doc/manual/src/contributing/hacking.md, all development
shells should also be available in classic nix using the -A argument
to nix-shell, e.g.
nix-shell -A native-clangStdenvPackages
This was not actually the case; flake-compat generates attrsets like
nix-shell -A devShells.x86_64-linux.native-clangStdenvPackages
instead. These are unwieldy to use, so rather than changing the docs,
this changes the shell.nix file to result in the documented behavior.
Change-Id: I0920ccbdfddacf371f0aeaae7e290db65cf76ee7
check goals for timeouts first, and their activity fds only if no
timeout has occurred. checking for timeouts *after* activity sets
us up for assertion failures by running multiple build completion
notifiers, the first of which will kill/reap the the goal process
and consuming the Pid instance. when the second notifier attempts
to do the same it will core dump with an assertion failure in Pid
and take down not only the single goal, but the entire daemon and
all goals it was building. luckily this is rare in practice since
it requires a build to both finish and time out at the same time.
writing a test for this is not feasible due to how much it relies
on scheduling to actually trigger the underlying bug, but on idle
machines it can usually be triggered by running multiple sleeping
builds with timeout set to the sleep duration and `--keep-going`:
nix-build --timeout 10 --builders '' --keep-going -E '
with import <nixpkgs> {};
builtins.genList
(i: runCommand "foo-${toString i}" {} "sleep 10")
100
'
Change-Id: I394d36b2e5ffb909cf8a19977d569bbdb71cb67b
8c06b7b43¹ made libfetchers log the URL being fetched just before the
actual fetch, particularly in case something freezes. This used the base
URL, to not include query parameters, as the Nixpkgs lib tests assume
that stderr logs will be equal across shallow and non-shallow git
fetches (and shallow fetches have the ?shallow=1 query parameter).
8c06b7b43 assumed that the `base` field of ParsedURL would be populated,
as the comment simply says "URL without query/fragment"... but
apparently it is not populated when the URL being fetched is *already*
fetched, which caused libfetchers to log things like
fetching gitlab input ''
which is. silly. but you know, busted lix be busted.
Anyway, with this commit we just remove the query params before printing
instead, which seems to do the right thing
[1]: 8c06b7b431
Change-Id: I9b9988992029aa6abef786f20b66e68c2ebb97d4
The `builder` local variable and duplicate `args.push_back` are no
longer required since the Darwin sandbox stopped using `sandbox-exec`.
The `drv->isBuiltin` check is not required either, as args are not
accessed when the builder is builtin.
Change-Id: I80b939bbd6f727b01793809921810ff09b579d54
Seccomp filtering and the no-new-privileges functionality improve the security
of the sandbox, and have been enabled by default for a long time. In
lix-project/lix#265 it was decided that they
should be enabled unconditionally. Accordingly, remove the allow-new-privileges
(which had weird behavior anyway) and filter-syscall settings, and force the
security features on. Syscall filtering can still be enabled at build time to
support building on architectures libseccomp doesn't support.
Change-Id: Iedbfa18d720ae557dee07a24f69b2520f30119cb
`meson test` refuses to let `--verbose` (which shows the entire
invocation and stdio) override `--quiet`, but if neither are specified
in the justfile then you can use either `just test -q` or `just test -v`
Change-Id: I449e13084ce64666b7ee2ab4280818782fb8185a
Embarrassingly, I submitted a CL overriding submit requirements since
I thought it was spurious failures. However, the CI failure was in fact
real, and I have hopefully learned my lesson. The CI failure is that:
```
vm-test-run-nix-upgrade-nix> machine # installing 'nix-2.18.1'
vm-test-run-nix-upgrade-nix> machine # building '/nix/store/2b6fdf7wvahd00bg2ff0393bhd597a0h-user-environment.drv'...
vm-test-run-nix-upgrade-nix> machine # error: Unable to build profile. There is a conflict for the following files:
vm-test-run-nix-upgrade-nix> machine #
vm-test-run-nix-upgrade-nix> machine # /nix/store/dn6mhhr92bh3ad0n4pd1538ww88khjii-nix-2.18.1/lib/libboost_context.so
vm-test-run-nix-upgrade-nix> machine # /nix/store/w4vffn9iq0znk8bcg5i2giij90xy6db6-lix-2.90.0pre20240523_c97e171/lib/libboost_context.so
vm-test-run-nix-upgrade-nix> machine # error: builder for '/nix/store/2b6fdf7wvahd00bg2ff0393bhd597a0h-user-environment.drv' failed with exit code 1
vm-test-run-nix-upgrade-nix> machine # error: program '/nix/store/w4vffn9iq0znk8bcg5i2giij90xy6db6-lix-2.90.0pre20240523_c97e171/bin/nix-env' failed with exit code 100
```
This is definitely caused by the pname not being the same, so we had
better revert that part of the change until we know we won't regress
anything by doing this.
Fixes: https://gerrit.lix.systems/c/lix/+/1152/5
Change-Id: I0e9d573987f2819c106fb7cea87410fa75152274
* changes:
docs: linkify nix3-build mention in nix-build.md
build: make internal-api-docs PHONY
cleanup lookupFileArg
add docstring to lookupFileArg
add libcmd test for lookupFileArg
This breaks downstreams linking to us on purpose to make sure that if
someone is linking to Lix they're doing it on purpose and crucially not
mixing up Nix and Lix versions in compatibility code.
We still need to fix the internal includes to follow the same schema so
we can drop the single-level include system entirely. However, this
requires a little more effort.
This adds pkg-config for libfetchers and config.h.
Migration path:
expr.hh -> lix/libexpr/expr.hh
nix/config.h -> lix/config.h
To apply this migration automatically, remove all `<nix/>` from
includes, so: `#include <nix/expr.hh>` -> `#include <expr.hh>`. Then,
the correct paths will be resolved from the tangled mess, and the
clang-tidy automated fix will work.
Then run the following for out of tree projects:
```
lix_root=$HOME/lix
(cd $lix_root/clang-tidy && nix develop -c 'meson setup build && ninja -C build')
run-clang-tidy -checks='-*,lix-fixincludes' -load=$lix_root/clang-tidy/build/liblix-clang-tidy.so -p build/ -fix src
```
Related: lix-project/nix-eval-jobs#5
Fixes: lix-project/lix#279
Change-Id: I7498e903afa6850a731ef8ce77a70da6b2b46966
Since we're skipping Meson's dependency tracking, for the
internal-api-docs custom target, we should just consider it a phony
target and build it on every request.
Change-Id: I3b0bcea30ee9a4830023ccc5bededf995e96cccc
this should make it easier to spot future instances of entries being
duplicated by accident. also add a pre-commit check to remain sorted
Change-Id: I500caf862e93480b38c9d51144273bb2dcab1af0
File not found while importing causes a SysError, not an EvalError,
which is not currently caught by the tab-completion handler. Ignoring
all SysErrors might seem "dangerous" but this is the tab-completion
handler, any exception being bubbled up from there causes unexpected
behavior (causes the whole repl to exit).
Fixes#340.
Change-Id: I643048a47935e77f582decc539d9e51bdb96c890
nixpkgs has 23000 attributes, and our previous limit would be hit if you
have more than one nixpkgs in the environment, for example, because
`repl-overlays` will load the new stuff from the environment on top of
the existing environment.
This is not really testable since if we did write such a test, it would
just be testing this constant tbh...
Fixes: lix-project/lix#337
Change-Id: I49197bfb4db55b082f914f0d70e84f5f5f110954
Also fix typos introduced by the commits I read.
I have run the addDrvOutputDependencies release note past Ericson since
I was confused by what the heck it was doing, and he was saying it was
reasonable.
Change-Id: Id015353b00938682f7faae7de43df7f991a5237e
nix::fetchers::CacheImpl uses $XDG_CACHE_HOME, or its default based on
$HOME, to store its SQLite database. If the current process can't write
to that directory for whatever reason, though, any eval-time fetching
would fail just initializing the cache.
With this change, IO errors initializing the fetcher cache are logged
but ignored, and nix::fetchers::CacheImpl falls back to an in-memory¹
database instead.
Notably, this will fix any uses eval fetching while Lix itself is being
run in a derivation builder (such as during tests), as the derivation
builder does not set $XDG_CACHE_HOME, and sets $HOME to the non-existent
directory /homeless-shelter.
Before:
$ env -u XDG_CACHE_HOME HOME=/homeless-shelter nix -Lv eval --impure -E 'fetchTarball "https://git.lix.systems/lix-project/lix/archive/main.tar.gz"'
error:
… while calling the 'fetchTarball' builtin
at «string»:1:1:
1| fetchTarball "https://git.lix.systems/lix-project/lix/archive/main.tar.gz"
| ^
error: creating directory '/homeless-shelter': Permission denied
After:
$ env -u XDG_CACHE_HOME HOME=/homeless-shelter nix -Lv eval --impure -E 'fetchTarball "https://git.lix.systems/lix-project/lix/archive/main.tar.gz"'
warning: ignoring error initializing Lix fetcher cache: error: creating directory '/homeless-shelter': Permission denied
"/nix/store/s9lxdnn0awp37n560bg4fgr497ah4hvw-source"
¹: https://www.sqlite.org/inmemorydb.html
Change-Id: I15c38c9baaf215fc6e192b8a4c70b9692a69bc22
This turns errors like:
error: flake output attribute 'hydraJobs' is not a derivation or path
into errors like:
error: expected flake output attribute 'hydraJobs' to be a derivation or
path but found a set: { binaryTarball = «thunk»; build = «thunk»; etc> }
This change affects all InstallableFlake commands.
Change-Id: I899757af418b6f98201006ec6ee13a448c07077c
Passing the commit message as an argument causes update failures on repositories with
lots of flake inputs. In some cases, the commit message is over 250,000 bytes.
Upstream PR: https://github.com/NixOS/nix/pull/10686
(cherry picked from commit 8b5e8f4fba5728f2b3e90fcd1ab15df77e3ea0e8)
Change-Id: I2c196a21cc9bedc24d57a828a0c5b9467e072f76
Move the identical static `chmod_` functions in libstore to
libutil. the function is called `chmodPath` instead of `chmod`
as otherwise it will shadow the standard library chmod in the nix
namespace, which is somewhat confusing.
Change-Id: I7b5ce379c6c602e3d3a1bbc49dbb70b1ae8f7bad
2bbe3efd1¹ added the -Wdeprecated-copy warning, and fixed the instances
of it which GCC warned about, in HintFmt and ref<T>. However, when
building with Clang, there is an additional deprecated-copy warning in
BaseError. This commit explicitly defaults the copy assignment operator
for BaseError and silences this warning.
1: 2bbe3efd16
Change-Id: I50aa4a7ab1a7aae5d7b31f765994abd3db06379d
Fate has something different in store for the release process,
backporting process and the general maintainer documentation.
See lix-project/lix#260.
Change-Id: I626686ff4059aee22a3ab1664b52581b2dbf6ed7
Signed-off-by: Raito Bezarius <raito@lix.systems>
having the serializer write into `*conn` is not legal because we are
in a sinkToSource that will be drained by the remote we're connected
to. writing into `*conn` directly can break the framing protocol. it
is unlikely this code was ever run: to protocol it caters to is from
2016(!) and thoroughly untested in-tree, and since it's been present
since nix 2.17 and the 1.18 protocol broken here is nix 2.0 we might
safely assume that daemons older than nix 2.1 are no longer used now
see also #325 (though that wants <2.3 gone, this is sadly only <2.1)
Change-Id: I9d674c18f6d802f61c5d85dfd9608587b73e70a5
On several occasions I've found myself confused when trying to delete
a store path, because I am told it's still alive, but
nix-store --query --roots doesn't show anything. Let's save future
users this confusion by mentioning that a path might be alive due to
having referrers, not just roots.
(cherry picked from commit 979a019014569eee7d0071605f6ff500b544f6ac)
Upstream-PR: https://github.com/NixOS/nix/pull/10733
Change-Id: I54ae839a85f3de3393493fba27fd40d7d3af0516
These commands outputs data that may not end with a newline. This
causes problems when the progress bar redraws, as that completely
wipes the last line of output. As nix key generate-secret outputs
a single line of text with no output, it shows up entirely blank,
making it look like nothing happened.
Fixes: lix-project/lix#320
Change-Id: I5ac706d71d839b6dfa760b60a351414cd96297cf
Fixes#183, #110, #116.
The default flake-registry option becomes 'vendored', and refers
to a vendored flake-registry.json file in the install path.
Vendored copy of the flake-registry is from github:NixOS/flake-registry
at commit 9c69f7bd2363e71fe5cd7f608113290c7614dcdd.
Change-Id: I752b81c85ebeaab4e582ac01c239d69d65580f37
This should have been in there originally, which is our mistake,
considering that debugging CI failures is basically impossible without
it.
Change-Id: I4ab8799e6e0abca1984ed9801fe10c58200861a3
We don't need bear anymore, since we don't have any more bad build
systems that lack compile commands generation inside Lix.
Change-Id: I7809ddfd993180468f846e8cd862bdd54d5b31ec
Both of these still needs their own actual documentation, but they are
at least now mentioned that they exist and what they're enabled by.
Change-Id: I235b9e8e627e04ed06611423c8e67a8eca233120
Example: /nix/store/dr53sp25hyfsnzjpm8mh3r3y36vrw3ng-neovim-0.9.5^out
This is nonsensical since selecting outputs can only be done for a
buildable derivation, not for a realised store path. The build worker
side of things ends up crashing with an assertion when trying to handle
such malformed paths.
Change-Id: Ia3587c71fe3da5bea45d4e506e1be4dd62291ddf
This builtin was always a problem and nixpkgs uses it in exactly one
place, to give up if the Nix version is absurdly old. It has no other
use cases, and doesn't work in a multi-implementation world anyway.
Change-Id: I03c36e118591029e2ef14b091fe14a311c66a08a
There are a few places in nixpkgs lib where `**Foo**:` is used as a heading instead of the usual markdown `# Foo` ones. I think this is intentional with how it gets rendered in the manual, e.g. [`lib.lists.sortOn`][1].
[1]: https://nixos.org/manual/nixpkgs/stable/#function-library-lib.lists.sortOn
`nix-doc` prints this as
```
*Laws**:
```nix
sortOn f == sort (p: q: f p < f q)
```
```
chomping off the first asterisk as part of `cleanup_single_line` that's meant to deal with `/** \n * \n * \n */` style doc comments. This also means the usage in lix ends up funny-looking with a trailing asterisk as if there's a footnote to pay attention to (which is how I first noticed it, heh)
The fix:
When cleaning up a single line and removing a prefix comment character,
ensure it's followed by whitespace (or the last character of the line).
Upstream-PR: https://github.com/lf-/nix-doc/pull/26
Change-Id: If2870c53a632f6bbbcca98a4bfbd72f5bef37879
Surely if you have unreleased changes you want them on a page right?
`officialRelease` means "this is a *release version*", which is a
reasonable case to not want it, but we are not that here.
I understand wanting to be able to turn it off for deps reasons or
something, but other than that, uhh, seems better to just turn it on
always; it is basically free compute-wise to the point we run it on
pre-commit.
Part two of fixing lix#297.
Fixes: lix-project/lix#297
Change-Id: I0f8dd1ae42458df371aef529c456e47a7ac04ae0
This allows us to have links to peoples' GitHub and Forgejo profiles.
I used YAML because I don't want to introduce a dependency on having a
working Nix evaluator to be able to build release notes, and we already
have a YAML parser in this script.
Change-Id: Idf2813f79e0407460c796cba6c383496465e152d
This does not add missing release notes, and it doesn't do anything
about the profiles feature we would really like to have so we can have
consistent credit.
Change-Id: I72a6f7acfcff85f380be17dac76501a6f4693776
This was a combination of two problems: the python didn't throw an error
because apparently glob on a nonexistent directory doesn't crash, and
secondarily, bash ignores bad exit codes without `set -e` if they are
not in the final/only command.
Change-Id: I812bde7a4daee5c77ffe9d7c73a25fd14969f548
Use the correct directory for the rl-next build, so that the release notes
actually get built and the page doesn't end up empty. I don't know why the
exception didn't cause a build failure before.
Fixes: lix-project/lix#297
Change-Id: Ic72b9bb4c0d2d1f633f2af90cce4a3a2796d7f9b
Basically I'd expect the same behavior as with `nix-build`, i.e.
with `--keep-going` the hash-mismatch error of each failing
fixed-output derivation is shown.
The approach is derived from `Store::buildPaths` (`entry-point.cc`):
instead of throwing the first build-result, check if there are any build
errors and if so, display all of them and throw after that.
Unfortunately, the BuildResult struct doesn't have an `ErrorInfo`
(there's a FIXME for that at least), so I have to construct my own here.
This is a rather cheap bugfix and I decided against touching too many
parts of libstore for that (also I don't know if that's in line with the
ongoing refactoring work).
Closes lix-project/lix#302
Change-Id: I378ab984fa271e6808c6897c45e0f070eb4c6fac
Now, we can credit folks for their work.
The credit generator is very basic, we probably want a database of
profiles and link to their preferred page or something.
Change-Id: Ida81905750371e5e125d0ce7e554d0526265cf8e
Co-Authored-By: Jade Lovelace <lix@jade.fyi>
Signed-off-by: Raito Bezarius <raito@lix.systems>
This is not like, perfect, since it is a manual operation, but we can
automate it in the future. rclone is used, since it seems like awscli is
not (obviously at least?) able to sync directories such that old things
are deleted, and rclone does this thing properly.
Fixes: lix-project/meta#2
Change-Id: Ia6a46d861342a6d29b22f981ba4e35e79f79e60e
Otherwise, it will be thrown again during exit when the repl is terminated by
end-of-input after the last command was interrupted.
Change-Id: I8456c47bc36cfb0892efdad5420f318f7e6526d5
The interrupt-blocking code was originally introduced 20 years ago so that
trying to log an error message does not result in an interrupt exception being
thrown and then going unhandled (c8d3882cdc).
However, the logging code does not check for interrupts any more
(054be50257), so this reasoning is no longer
applicable. Delete this code so that later interrupts are unblocked again, for
example in the next line entered into the repl.
Closes: lix-project/lix#296
Change-Id: I48253f5f4272e75001148c13046e709ef5427fbd
Very basic behavior test to ensure that gzip data gets internally
decompressed by the file transfer pipeline.
Change a std::string_view return value in the test harness to
std::string. I wouldn't call myself a C++ beginner and I still managed
to shoot myself in the foot like three times with the lifetime
managements there (e.g. [&] { return an_std_string; } ends up with a
dangling string_view!).
Change-Id: I1360750d4181ce1ca2a3aa4dc0e97e131351c469
it's no longer used. it really shouldn't have existed this long since it
was just a mashup of both std::promise and std::packaged_task in a shape
that makes composition unnecessarily difficult. all but a single case of
Callback pattern calls were fully synchronous anyway, and even this sole
outlier was by far not important enough to justify the extra complexity.
Change-Id: I208aec4572bf2501cdbd0f331f27d505fca3a62f
also add a few more tests for exception propagation behavior. using
packaged_tasks and futures (which only allow a single call to a few
of their methods) introduces error paths that weren't there before.
Change-Id: I42ca5236f156fefec17df972f6e9be45989cf805
this is the *only* real user of file transfer download completion
callbacks, and a pretty spurious user at that (seeing how nothing
here is even turned on by default and indeed a dependency of path
substitution which *isn't* async, and concurrency-limited). it'll
be a real pain to keep this around, and realistically it would be
a lot better to overhaul substitution in general to be *actually*
async. that requires a proper async framework footing though, and
we don't have anything of the sort, but it's also blocking *that*
Change-Id: I1bf671f217c654a67377087607bf608728cbfc83
The fix for the Darwin vulnerability in ecdbc3b207
also broke setting `__sandboxProfile` when `sandbox=relaxed` or
`sandbox=false`. This cppnix change fixes `sandbox=relaxed` and
adds a suitable test.
Co-Authored-By: Artemis Tosini <lix@artem.ist>
Co-Authored-By: Eelco Dolstra <edolstra@gmail.com>
Change-Id: I40190f44f3e1d61846df1c7b89677c20a1488522
In commit 946fc12e4e, the progress bar in the
repl was disabled again because it was observed to erase incremental output
from attrset evaluations from the terminal. Let's try adding the progress bar
again, this time showing up only when a build is initiated, which does not have
incremental output that could be destroyed to begin with. While this does mean
that we won't have a progress bar for eval-time fetching or IFD, it's still
better than nothing.
Change-Id: If4eb1035cd0c876f5b4ff1e2434b9baf99f150ac
Now instead of a derivation overridden from Lix, we use a mkShell
derivation parameterized on an already called package.nix. This also
lets callPackage take care of the buildPackages distinction for the
devShell.
Change-Id: I5ddfec40d83fa6136032da7606fe6d3d5014ef42
* changes:
flake: fix devShell on i686-linux by disabling ClangBuildAnalyzer on it
flake: fix eval of checks & devshell on i686-linux
flake: move the pre-commit definition to its own file
ClangBuildAnalyzer doesn't build on i686-linux due to
`long long int`/`size_t` conversion errors, so let's just exclude it
from the devshell on that platform
Change-Id: If1077a7b3860db4381999c8e304f6d4b2bc96a05
Because of an objc quirk[1], calling curl_global_init for the first time
after fork() will always result in a crash.
Up until now the solution has been to set
OBJC_DISABLE_INITIALIZE_FORK_SAFETY for every nix process to ignore
that error.
This is less than ideal because we were setting it in package.nix,
which meant that running nix tests locally would fail because
that variable was not set.
Instead of working around that error we address it at the core -
by calling curl_global_init inside initLibStore, which should mean
curl will already have been initialized by the time we try to do so in
a forked process.
[1] 01edf1705f/runtime/objc-initialize.mm (L614-L636)
Change-Id: Icf26010a8be655127cc130efb9c77b603a6660d0
only two users of this function exist. only one used it in a way that
even bears resemblance to asynchronicity, and even that one didn't do
it right. fully async and parallel computation would have only worked
if any getEdgesAsync never calls the continuation it receives itself,
only from more derived callbacks running on other threads. calling it
directly would cause the decoupling promise to be awaited immediately
*on the original thread*, completely negating all nice async effects.
Change-Id: I0aa640950cf327533a32dee410105efdabb448df
this seems to be an oversight, considering that regular substitutions
are concurrency-limited. while not particularly necessary at present,
once we've removed the `Callback` based interfaces it will be needed.
Change-Id: Ide2d08169fcc24752cbd07a1d33fb8482f7034f5
When /nix/var (or, more precisely, NIX_STATE_DIR) does not exist at all,
Lix falls back to creating an adhoc chroot store in XDG_DATA_HOME.
b247ef72d[1] changed the way Store classes are initialized, and in the
migration, a `params2` was accidentally changed to `params`. This commit
restores the correct behavior, and in lieu of a single *character* fix,
this commit also changes the variable name to something more reasonable.
Fixes#274.
[1]: b247ef72dc
n.b., this code might deserve some more looking at anyway. this fallback
store creation throws away *all* Store params passed to
openFromNonUri() in favor of an entirely new set which only contains
the `root` param, which may or may not be the correct behavior
Change-Id: Ibea559b88a50e6d6e75a1f87d9d7816cabb2a8f3
As per our bootstrap governance discussions, here's a very simple
proposal which links as much as possible to our wiki.
Change-Id: I88b1c43f933ff7e529151b1e933fad40283383c4
Signed-off-by: Raito Bezarius <raito@lix.systems>
returning 0 from the callback for errors signals successful transfer if
the source returned no data even though the exception we've just caught
clearly disagrees. while this is not all that important (since the only
viable cause of such errors will be dataCallback, and the sole instance
of it being used already takes care of exceptions) we can just do this.
Change-Id: I2bb150eff447121d82e8e3aa4e00057c40523ac6
this will be necessary if we want download() to return a source instead
of consuming a sink, which will in turn be needed to remove coroutines.
Change-Id: I34ec241e9bbc5d32fbcd243b244e29c3757533aa
Some tests were failing on darwin,
if the auto-allocate-uids featrure was enabled.
This was because AAU on darwin works by setuid-ing as a non-existent
user, so the tests that were relying on `whoami` were failing.
In the case of trusted-users we fall back to printing the user id,
which is already handled gracefully in the daemon code - i.e. when
a user does not exist or for some other reason looking up their
username is not possible, the daemon falls back to searching for their
uid inside the trusted-users list.
When whoami is used to print the username for other purpose,
we default to printing nixbld.
Change-Id: Ib61615677565098cb5fbf5e26a946ef427c58caf
This doesn't comprehensively fix everything outdated in the manual, or
make the manual greatly better, but it does note down where at least
jade noticed it was wrong, and it does fix all the instances of
referencing Nix to conform to the style guide to the best of our
ability.
A lot of things have been commented out for being wrong, and there are
three types of FIXME introduced:
- FIXME(Lix): generically Lix needs to fix it
- FIXME(Qyriad): re lix-project/lix#215
- FIXME(meson): docs got outdated by meson changes and need rewriting
I did fix a bunch of it that I could, but there could certainly be
mistakes and this is definitely just an incremental improvement.
Fixes: lix-project/lix#266
Change-Id: I5993c4603d7f026a887089fce77db08394362135
sizeof(long) is 4 bytes on i686 GCC.
With ~32 GiB of memory and a page size of 4096, there are 7988420 pages.
(7988420 * 4096) is bigger than INT32_MAX folks.
This has gone unnoticed for 9 years, and only came up thanks to
94ea517db[1] adding integer overflow sensitization checks, which caused
this broken code to emit an illegal instruction, crashing Lix the
instant the buildsystem ran Lix to generate the docs files.
[1]: 94ea517dbe
Change-Id: I50bb9ea072aac11b449d79e5d55525887a6e5a99
not doing this will cause transfers that had their readers disappear to
linger. with lingering transfers the curl thread can't shut down, which
will cause nix itself to not shut down until the transfer finishes some
other way (most likely network timeouts). also add a new test for this.
Change-Id: Id2401b3ac85731c824db05918d4079125be25b57
mdbook has the unfortunate habit of creating stub files for chapters it
can't find on disk. turn off this helpful feature as it masks errors in
the summary file, and fix a recently introduced instance of this error.
Change-Id: I10d86aac0489c9c494bd5c8a50047415f4d4b18d
If unprivileged userns are *believed* to be disabled (such as with
"kernel.unprivileged_userns_clone = 0"), Lix would previously *give up*
on trying to use a user namespace before actually trying it, even if, in
cases such as unprivileged_userns_clone, it would actually be allowed
since Nix has CAP_SYS_ADMIN when running as daemon.
(see, e.g. 25d4709a4f)
We changed it to actually try it first, and then diagnose possible
causes, and also to be more loud about the whole thing, using warnings
instead of debugs. These warnings will only print on the first build run
by the daemon, which is, tbh, eh, shrug.
This is what led to us realizing that no-userns was a poorly exercised
condition.
Change-Id: I8e4f21afc89c574020dc7e89a560cc740ce6573a
This was found when `logrotate.conf` failed to build in a NixOS system
with:
/nix/store/26zdl4pyw5qazppj8if5lm8bjzxlc07l-coreutils-9.3/bin/id: cannot find name for group ID 30000
This was surprising because it seemed to mean that /etc/group was busted
in the sandbox. Indeed it was:
root❌0:
nixbld:!💯
nogroup❌65534:
We diagnosed this to sandboxUid() being called before
usingUserNamespace() was called, in setting up /etc/group inside the
sandbox. This code desperately needs refactoring.
We also moved the /etc/group code to be with the /etc/passwd code, but
honestly this code is all spaghetti'd all over the place and needs some
more serious tidying than we did here.
We also moved some checks to be earlier to improve locality with where
the things they are checking come from.
Change-Id: Ie29798771f3593c46ec313a32960fa955054aceb
This has the following downsides:
* you cannot build Lix against nixos-unstable.
* this will immediately break as soon as libseccomp will hit
nixos-23.11 (given that people will probably use the package.nix via
our overlay or override nixpkgs via `follows`).
Hence, removing the assert again and add a better FIXME comment.
Change-Id: I284e10cf08e1873fef70ed869a1638aa89792422
This reverts commit a8b3d777fb.
This undoes the revert of PR#6621, which allows nested `follows`, i.e.
{
inputs = {
foo.url = "github:bar/foo";
foo.inputs.bar.inputs.nixpkgs = "nixpkgs";
};
}
does the expected thing now. This is useful to avoid the 1000 instances
of nixpkgs problem without having each flake in the dependency tree to
expose all of its transitive dependencies for modification.
This was in fact part of Nix before and the C++ changes applied w/o
conflicts. However, it got reverted then because people didn't want to
merge lazy-trees against it which was supposed to be merged soon back in
October 2022.
Fixes: lix-project/lix#201
Change-Id: I5ddef914135b695717b2ef88862d57ced5e7aa3c
With Linux kernel >=6.6 & glibc 2.39 a `fchmodat2(2)` is available that
isn't filtered away by the libseccomp sandbox.
Being able to use this to bypass that restriction has surprising results
for some builds such as lxc[1]:
> With kernel ≥6.6 and glibc 2.39, lxc's install phase uses fchmodat2,
> which slips through 9b88e52846/src/libstore/build/local-derivation-goal.cc (L1650-L1663).
> The fixupPhase then uses fchmodat, which fails.
> With older kernel or glibc, setting the suid bit fails in the
> install phase, which is not treated as fatal, and then the
> fixup phase does not try to set it again.
Please note that there are still ways to bypass this sandbox[2] and this is
mostly a fix for the breaking builds.
This change works by creating a syscall filter for the `fchmodat2`
syscall (number 452 on most systems). The problem is that glibc 2.39
is needed to have the correct syscall number available via
`__NR_fchmodat2` / `__SNR_fchmodat2`, but this flake is still on
nixpkgs 23.11. To have this change everywhere and not dependent on the
glibc this package is built against, I added a header
"fchmodat2-compat.hh" that sets the syscall number based on the
architecture. On most platforms its 452 according to glibc with a few
exceptions:
$ rg --pcre2 'define __NR_fchmodat2 (?!452)'
sysdeps/unix/sysv/linux/x86_64/x32/arch-syscall.h
58:#define __NR_fchmodat2 1073742276
sysdeps/unix/sysv/linux/mips/mips64/n32/arch-syscall.h
67:#define __NR_fchmodat2 6452
sysdeps/unix/sysv/linux/mips/mips64/n64/arch-syscall.h
62:#define __NR_fchmodat2 5452
sysdeps/unix/sysv/linux/mips/mips32/arch-syscall.h
70:#define __NR_fchmodat2 4452
sysdeps/unix/sysv/linux/alpha/arch-syscall.h
59:#define __NR_fchmodat2 562
I added a small regression-test to the setuid integration-test that
attempts to set the suid bit on a file using the fchmodat2 syscall.
I confirmed that the test fails without the change in
local-derivation-goal.
Additionally, we require libseccomp 2.5.5 or greater now: as it turns
out, libseccomp maintains an internal syscall table and
validates each rule against it. This means that when using libseccomp
2.5.4 or older, one may pass `452` as syscall number against it, but
since it doesn't exist in the internal structure, `libseccomp` will refuse
to create a filter for that. This happens with nixpkgs-23.11, i.e. on
stable NixOS and when building Lix against the project's flake.
To work around that
* a backport of libseccomp 2.5.5 on upstream nixpkgs has been
scheduled[3].
* the package now uses libseccomp 2.5.5 on its own already. This is to
provide a quick fix since the correct fix for 23.11 is still a staging cycle
away.
We still need the compat header though since `SCMP_SYS(fchmodat2)`
internally transforms this into `__SNR_fchmodat2` which points to
`__NR_fchmodat2` from glibc 2.39, so it wouldn't build on glibc 2.38.
The updated syscall table from libseccomp 2.5.5 is NOT used for that
step, but used later, so we need both, our compat header and their
syscall table 🤷
Relevant PRs in CppNix:
* https://github.com/NixOS/nix/pull/10591
* https://github.com/NixOS/nix/pull/10501
[1] https://github.com/NixOS/nixpkgs/issues/300635#issuecomment-2031073804
[2] https://github.com/NixOS/nixpkgs/issues/300635#issuecomment-2030844251
[3] https://github.com/NixOS/nixpkgs/pull/306070
(cherry picked from commit ba6804518772e6afb403dd55478365d4b863c854)
Change-Id: I6921ab5a363188c6bff617750d00bb517276b7fe
Part of #7672
My main motivation is to be able to use `nix.checkConfig`[1]. This
doesn't work with Lix currently since the module uses `nix show-config`
if the Nix version is <2.20pre and `nix config show` otherwise. I think
this is the only instance where nixpkgs checks for which Nix commands
exist that affects us now, so I figured we could just perform the rename
here as well[2] and still provide the current version number[3].
I don't have a strong opinion on whether to deprecate `nix show-config`,
the warning is added there automatically.
(cherry picked from commit f300e11b056dea414d7d77bbc6e5a7dc5d9ddd41)
[1] https://nixos.org/manual/nixos/stable/options.html#opt-nix.checkConfig
[2] I should add that I don't use the "official" ways of installing Lix
because using the flake directly and callPackaging it seemed to fit
better into my workflow: I already have a little mess to make
sure Hydra from the flake uses the correct pkgs.nix and I didn't
want to complicate it further while keeping a single package-set I
can build in CI. Don't get me wrong, I think such a module for a
quick-start is very important, just giving context on why I bother
in the first place :)
[3] When we go public, I think it's worth considering to add support in
nixpkgs itself for Lix.
Change-Id: I47b4239b05cbeda3c370d2fa56ea768b768768ac
* changes:
docs: clarify how ^ works for -E/-f installables
docs: give translation examples from nix-build -E/-A to installables
docs: clarify how the different kinds of installables are selected
docs: guide to installables docs in installable commands' docs
Currently LocalDerivationGoal allows setting `__sandboxProfile`
to add sandbox parameters on Darwin when `sandbox=true`.
This was only supposed to have an effect when `sandbox=relaxed`
Change-Id: Ide44ee82d7e4d6b545285eab26547e7014817d3f
this is used in CA rewriting, replacement of placeholders in
derivations, generating scripts for devShells, and some more
places. in all of these transitive replacements are unsound,
and overlapping replacements would be as well. there even is
a test that transitive replacements do not happen (in the CA
RewriteSink suite), but none for overlapping replacements. a
minimally surprising binary rewriter surely would not do any
of these replacements, the only reason we have not seen this
break yet is probably that rewriteStrings is only called for
store paths and things that look like store paths (and those
should never overlap nor admit such transitive replacements)
Change-Id: I6fc29f939d5061d9f56c752624a823ece8437c07
* changes:
nix3-profile: remove check "name" attr in manifests
Add profile migration test
nix3-profile: make element names stable
getNameFromURL(): Support uppercase characters in attribute names
nix3-profile: remove indices
nix3-profile: allow using human-readable names to select packages
implement parsing human-readable names from URLs
As discussed in the maintainer meeting on 2024-01-29.
Mainly this is to avoid a situation where the name is parsed and
treated as a file name, mostly to protect users.
.-* and ..-* are also considered invalid because they might strip
on that separator to remove versions. Doesn't really work, but that's
what we decided, and I won't argue with it, because .-* probably
doesn't seem to have a real world application anyway.
We do still permit a 1-character name that's just "-", which still
poses a similar risk in such a situation. We can't start disallowing
trailing -, because a non-zero number of users will need it and we've
seen how annoying and painful such a change is.
What matters most is preventing a situation where . or .. can be
injected, and to just get this done.
(cherry picked from commit f1b4663805a9dbcb1ace64ec110092d17c9155e0)
Change-Id: I900a8509933cee662f888c3c76fa8986b0058839
Gen::just is the constant generator. Don't just return that!
(cherry picked from commit 8406da28773f050e00a006e4812e3ecbf919a2a9)
Change-Id: Ibfd0bd40f90942077a4720086ce0cd3bfabef79d
Gen: :just is the constant generator. Don't just return that!
(cherry picked from commit 69bbd5852af9b2f0b794162bd1debcdf64fc6648)
Change-Id: Id6e58141f5a42a1f67bd11d48c87b32a3ebd0500
We didn't even realize you *could* use this syntax with -E and -f, much
less that the attribute path could be *empty*.
Change-Id: Id1a6715609f3a76a5ce477bd43a7832effbbe07b
The installables syntax is not documented in any of the man pages or
docbook pages for any of those individual commands. And while these
commands really should at least peripherally individually document how
installables work, in the meantime we can at least direct people to the
right place.
This commit also clarifies the unexpected fact that `nix profile remove`
and `nix profile upgrade` do *not* take installables.
Change-Id: I3b1453cb197a613bbab639c66a466365c3592c6d
This commit adds a new NixOS VM test, which tests that `nix upgrade-nix`
works on both kinds of profiles (manifest.nix and manifest.json).
Done as a separate commit from 831d18a13, since it relies on the
--store-path argument from 026c90e5f as well.
Change-Id: I5fc94b751d252862cb6cffb541a4c072faad9f3b
nix3-profile automatically migrates any profile its used on to its style
of profile -- the ones with manifest.json instead of manifest.nix. On
non-NixOS systems, Nix is conventionally installed to the profile at
/nix/var/nix/profiles/default, so if a user passed that to `--profile`
of `nix profile`, then it would break upgrade-nix from ever working
again, without recreating the profile.
This commit fixes that, and allows upgrade-nix to work on either kind of
profile.
Fixes#16.
Change-Id: I4c49b1beba93bb50e8f8a107edc451affe08c3f7
Notably, ProfileManifest and ProfileElement are useful generic
profile management code, and nix profile is not the only place in the
codebase where profiles are relevant.
This commit is in preparation for fixing upgrade-nix's interaction with
new-style profiles.
Change-Id: Iefc8bbd34b4bc6012175cb3d6e6a8207973bc792
This replaces the external sandbox-exec call with direct calls into
libsandbox. This API is technically deprecated and is missing some
prototypes, but all major browsers depend on it, so it is unlikely to
materially change without warning.
This commit also ensures the netrc file is only written if the
derivation is in fact meant to be able to access the internet.
This change commits a sin of not actually actively declaring its
dependency on macOS's libsandbox.dylib; this is due to the dylib
cache in macOS making that explicit dependency unnecessary. In the
future this might become a problem, so this commit marks our sins.
Co-authored-by: Artemis Tosini <lix@artem.ist>
Co-authored-by: Lunaphied <lunaphied@lunaphied.me>
Change-Id: Ia302141a53ce7b0327c1aad86a117b6645fe1189
This should have been there from the beginning. As much as nix-env is a
pile of problems we don't need trivial docs papercuts like this adding
to it.
Change-Id: I0c53e4b146af2fefdd0e4743d850672729cb2194
That's expected by `build-remote` and makes sure that errors are
correctly forwarded to the user. For instance, let's say that the
host-key of `example.org` is unknown and
nix-build ../nixpkgs -A hello -j0 --builders 'ssh-ng://example.org'
is issued, then you get the following output:
cannot build on 'ssh-ng://example.org?&': error: failed to start SSH connection to 'example.org'
Failed to find a machine for remote build!
derivation: yh46gakxq3kchrbihwxvpn5bmadcw90b-hello-2.12.1.drv
required (system, features): (x86_64-linux, [])
2 available machines:
[...]
The relevant information (`Host key verification failed`) ends up in the
daemon's log, but that's not very obvious considering that the daemon
isn't very chatty normally.
This can be fixed - the same way as its done for legacy-ssh - by passing
fd 4 to the SSH wrapper. Now you'd get the following error:
cannot build on 'ssh-ng://example.org': error: failed to start SSH connection to 'example.org': Host key verification failed.
Failed to find a machine for remote build!
[...]
...and now it's clear what's wrong.
Please note that this is won't end up in the derivation's log.
For previous discussion about this change see
https://github.com/NixOS/nix/pull/7659.
Change-Id: I5790856dbf58e53ea3e63238b015ea06c347cf92
only decompress the response once all data has been received (in the
fully buffered case), or at least outside of the curl wrapper itself
(in the receive-to-sink case). unfortunately this means we will have
to duplicate decompression logic for these two cases for time being,
but once the curl wrapper has been rewritten to return a real future
or Source we can deduplicate this logic again. the curl wrapper will
have to turn into a proper Source first and use decompression source
logic which also does not currently exist—only decompression *sinks*
Change-Id: I66bc692f07d9b9e69fe10689ee73a2de8d65e35c
this is highly questionable. single-arg download calls will misbehave
with it set, and two-arg download calls will just overwrite it. being
an implementation detail this should not have been in the API at all.
Change-Id: I613772951ee03d8302366085f06a53601d13f132
this lets each implementation of FileTransfer (of which currently only
the one exists at all) implement appropriate handling for its internal
behaviours that are not otherwise exposed. in curl this lets us switch
the buffer-full handling method from "block the entire curl thread" to
"pause just the one transfer", move the non-libcurl body decompression
out of the actual curl wrapper (which will let us eventually morph the
curl wrapper intto an actual source of Sources), and some other things
Change-Id: Id6d3593cde6b4915aab3e90a43b175c103cc3f18
Previously, the garbage collector found runtime roots on Darwin by
shelling out to `lsof -n -w -F n` then parsing the result.
However, this requires an lsof binary and can be extremely slow.
The official Apple lsof returns in a reasonable amount of time,
about 250ms in my tests, but the lsof packaged in nixpkgs is quite slow,
taking about 40 seconds to run the command.
Using libproc directly is about the same speed as Apple lsof,
and allows us to reënable several tests that were disabled on Darwin.
Change-Id: Ifa0adda7984e13c15535693baba835aae79a3577
My main motivation for this change is to limit the amount of compile
jobs to make sure my machine is still usable for something else when
building a fresh Lix locally.
Also made `build` a dependency of `install`: this is analogous to
`make install` in CppNix where this both recompiles changed files and
installs the artifacts into `outputs/out`. May be a little more pleasant
to work with that, especially when you're used to contributing to
CppNix.
Change-Id: I321e2b0daf1c5e20f82c04e2dd158056c80ed86c
just accumulate error data into result.data as we would for successful
transfers without a dataCallback. errorSink and data would contain the
same data in error cases anyway, so splitting them is not very useful.
Change-Id: I00e449866454389ac6a564ab411c903fd357dabf
Meson cross files layer, the last value of each key takes effect.
https: //mesonbuild.com/Machine-files.html#loading-multiple-machine-files
Change-Id: I22d886f71cd51f0ce520d3fc22aed4bcf074bb91
This creates new subclasses of LocalStore for each OS to include
platform-specific functionality. Currently this just includes garbage
collector roots but it could be extended to sandboxing as well.
In order to make sure that the generic LocalStore is not accidentally
constructed, its constructor is protected. A Fallback is provided which
implements no functionality except constructors.
Change-Id: I836a28e90b68309873f75afb83e0f1b2e2c89fb3
This commit makes Meson the default buildsystem for Lix.
The Make buildsystem is now deprecated and will be removed soon, but has
not yet, which will be done in a later commit when all seems good. The
mesonBuild jobs have been removed, and have not been replaced with
equivalent jobs to ensure the Make buildsystem still works.
The full, new commands in a development shell are:
$ meson setup ./build "--prefix=$out" $mesonFlags
(A simple `meson setup ./build` will also build, but will do a different
thing, not having the settings from package.nix applied.)
$ meson compile -C build
$ meson test -C build --suite=check
$ meson install -C build
$ meson test -C build --suite=installcheck
(Check and installcheck may both be done after install, allowing you to
omit the --suite argument entirely, but this is the order package.nix
runs them in.)
If tests fail and Meson helpfully has no output for why, use the
`--print-error-logs` option to `meson test`. Why this is not the default
I cannot explain.
If you change a setting in the buildsystem, most cases will
automatically regenerate the Meson configuration, but some cases, like
trying to build a specific target whose name is new to the buildsystem
(e.g. `meson compile -C build src/libmelt/libmelt.dylib`, when
`libmelt.dylib` did not exist as a target the last time the buildsystem
was generated), then you can reconfigure using new settings but
existing options, and only recompiling stuff affected by the changes:
$ meson setup --reconfigure build
Note that changes to the default values in `meson.options` or in the
`default_options :` argument to project() are NOT propagated with
`--reconfigure`.
If you want a totally clean build, you can use:
$ meson setup --wipe build
That will work regardless of if `./build` exists or not.
Specific, named targets may be addressed in
`meson build -C build <target>` with the "target ID" if there is one,
which is the first string argument passed to target functions that
have one, and unrelated to the variable name, e.g.:
libexpr_dylib = library('nixexpr', …)
can be addressed with:
$ meson compile -C build nixexpr
All targets may be addressed as their output, relative to the build
directory, e.g.:
$ meson compile -C build src/libexpr/libnixexpr.so
But Meson does not consider intermediate files like object files
targets. To build a specific object file, use Ninja directly and
specify the output file relative to the build directory:
$ ninja -C build src/libexpr/libnixexpr.so.p/nixexpr.cc.o
To inspect the canonical source of truth on what the state of the
buildsystem configuration is, use:
$ meson introspect
Have fun!
Change-Id: Ia3e7b1e6fae26daf3162e655b4ded611a5cd57ad
This should fix cross compilation in the base case, but this is
difficult to test as cross compilation is broken in many different
places right now. This should bring Meson back up to cross parity with
the Make buildsystem though.
Change-Id: If09be8142d1fc975a82b994143ff35be1297dad8
don't reimplement header parsing. this was only really needed due to the
ancient github bug we no longer care about, everything else we have done
in custom code can also be done using curl itself. doing this also fixes
possible sources of header smuggling (because the header function didn't
unfold headers and we'd trim them before parsing, which would've made us
read contents of one header as a fully formed header in itself). this is
a slight behavior change because we now honor only the first instance of
a given header where previous behavior was to honor either the last or a
combination of all of them (accept-ranges was logical-or'd by accident).
Change-Id: I93cb93ddb91ab98c8991f846014926f6ef039fdb
this was a workaround for a *github* bug that happend *in 2015*.
not only is github no longer buggy, it shouldn't have been nix's
responsibility to work around these bugs like this to begin with
while we're at it we'll also remove another workaround—again for
github specifically and again for etag handling—from 2021 that's
also not needed any more. future workarounds for serverside bugs
should probably come with an expiration date that mutates into a
build warning after a while, otherwise this *will* happen again.
Change-Id: I74f739ae3e36d40350f78bebcb5869aa8cc9adcd
In hopes of avoiding opaque error messages like the one in
https://buildbot.lix.systems/#/builders/49/builds/1054/steps/1/logs/stdio
Traceback (most recent call last):
File "/nix/store/wj6wh89jhd2492r781qsr09r9wydfs6m-nixos-test-driver-1.1/bin/.nixos-test-driver-wrapped", line 9, in <module>
sys.exit(main())
^^^^^^
File "/nix/store/wj6wh89jhd2492r781qsr09r9wydfs6m-nixos-test-driver-1.1/lib/python3.11/site-packages/test_driver/__init__.py", line 126, in main
driver.run_tests()
File "/nix/store/wj6wh89jhd2492r781qsr09r9wydfs6m-nixos-test-driver-1.1/lib/python3.11/site-packages/test_driver/driver.py", line 159, in run_tests
self.test_script()
File "/nix/store/wj6wh89jhd2492r781qsr09r9wydfs6m-nixos-test-driver-1.1/lib/python3.11/site-packages/test_driver/driver.py", line 151, in test_script
exec(self.tests, symbols, None)
File "<string>", line 13, in <module>
AssertionError
Change-Id: Idd2212a1c3714ce58c7c3a9f34c2ca4313eb6d55
the previous solution to the wakeup problem (adding a pipe and passing
it as an additional fd to curl_multi_wait) worked, but there have been
builtin alternatives for this since 2020. not only do these save code,
they're also a lot more likely to work natively on windows when needed
Change-Id: Iab751b900997110a8d15de45ea3ab0c42f7e5973
the oldest version checked for here is 7.47, which was released in
2016. it's probably safe to say that we do not need these any more
Change-Id: I003411f6b2ce6d56f7ca337390df3ea86bd59a99
With Nix 2.3, it was possible to pass a subpath of a store path to
exportReferencesGraph:
with import <nixpkgs> {};
let
hello = writeShellScriptBin "hello" ''
echo ${toString builtins.currentTime}
'';
in
writeClosure [ "${hello}/bin/hello" ]
This regressed with Nix 2.4, with a very confusing error message, that
presumably indicates it was unintentional:
error: path '/nix/store/3gl7kgjr4pwf03f0x70dgx9ln3bhl7zc-hello/bin/hello' is not in the Nix store
(cherry picked from commit 0774e8ba33c060f56bad3ff696796028249e915a)
Change-Id: I00920fb33077b831a1bb4a1b68d515ba8c3c2a69
2024-04-21 10:27:32 +00:00
1817 changed files with 2 additions and 151054 deletions
- To remove the stale label, just leave a new comment.
- _How to find the right people to ping?_→ [`git blame`](https://git-scm.com/docs/git-blame) to the rescue! (or GitHub's history and blame buttons.)
- You can always ask for help on [our Discourse Forum](https://discourse.nixos.org/) or on [Matrix - #nix:nixos.org](https://matrix.to/#/#nix:nixos.org).
## Suggestions for PRs
1. GitHub sometimes doesn't notify people who commented / reviewed a PR previously, when you (force) push commits. If you have addressed the reviews you can [officially ask for a review](https://docs.github.com/en/free-pro-team@latest/github/collaborating-with-issues-and-pull-requests/requesting-a-pull-request-review) from those who commented to you or anyone else.
2. If it is unfinished but you plan to finish it, please mark it as a draft.
3. If you don't expect to work on it any time soon, closing it with a short comment may encourage someone else to pick up your work.
4. To get things rolling again, rebase the PR against the target branch and address valid comments.
5. If you need a review to move forward, ask in [the Discourse thread for PRs that need help](https://discourse.nixos.org/t/prs-in-distress/3604).
6. If all you need is a merge, check the git history to find and [request reviews](https://docs.github.com/en/github/collaborating-with-issues-and-pull-requests/requesting-a-pull-request-review) from people who usually merge related contributions.
## Suggestions for issues
1. If it is resolved (either for you personally, or in general), please consider closing it.
2. If this might still be an issue, but you are not interested in promoting its resolution, please consider closing it while encouraging others to take over and reopen an issue if they care enough.
3. If you still have interest in resolving it, try to ping somebody who you believe might have an interest in the topic. Consider discussing the problem in [our Discourse Forum](https://discourse.nixos.org/).
4. As with all open source projects, your best option is to submit a Pull Request that addresses this issue. We :heart: this attitude!
**Memorandum on closing issues**
Don't be afraid to close an issue that holds valuable information. Closed issues stay in the system for people to search, read, cross-reference, or even reopen--nothing is lost! Closing obsolete issues is an important way to help maintainers focus their time and effort.
## Useful GitHub search queries
- [Open PRs with any stale-bot interaction](https://github.com/NixOS/nix/pulls?q=is%3Apr+is%3Aopen+commenter%3Aapp%2Fstale+)
- [Open PRs with any stale-bot interaction and `stale`](https://github.com/NixOS/nix/pulls?q=is%3Apr+is%3Aopen+commenter%3Aapp%2Fstale+label%3A%22stale%22)
- [Open PRs with any stale-bot interaction and NOT `stale`](https://github.com/NixOS/nix/pulls?q=is%3Apr+is%3Aopen+commenter%3Aapp%2Fstale+-label%3A%22stale%22+)
- [Open Issues with any stale-bot interaction](https://github.com/NixOS/nix/issues?q=is%3Aissue+is%3Aopen+commenter%3Aapp%2Fstale+)
- [Open Issues with any stale-bot interaction and `stale`](https://github.com/NixOS/nix/issues?q=is%3Aissue+is%3Aopen+commenter%3Aapp%2Fstale+label%3A%22stale%22+)
- [Open Issues with any stale-bot interaction and NOT `stale`](https://github.com/NixOS/nix/issues?q=is%3Aissue+is%3Aopen+commenter%3Aapp%2Fstale+-label%3A%22stale%22+)
Welcome and thank you for your interest in contributing to Nix!
We appreciate your support.
Reading and following these guidelines will help us make the contribution process easy and effective for everyone involved.
## Report a bug
1. Check on the [GitHub issue tracker](https://github.com/NixOS/nix/issues) if your bug was already reported.
2. If you were not able to find the bug or feature [open a new issue](https://github.com/NixOS/nix/issues/new/choose)
3. The issue templates will guide you in specifying your issue.
The more complete the information you provide, the more likely it can be found by others and the more useful it is in the future.
Make sure reported bugs can be reproduced easily.
4. Once submitted, do not expect issues to be picked up or solved right away.
The only way to ensure this, is to [work on the issue yourself](#making-changes-to-nix).
## Report a security vulnerability
Check out the [security policy](https://github.com/NixOS/nix/security/policy).
## Making changes to Nix
1. Check for [pull requests](https://github.com/NixOS/nix/pulls) that might already cover the contribution you are about to make.
There are many open pull requests that might already do what you intent to work on.
You can use [labels](https://github.com/NixOS/nix/labels) to filter for relevant topics.
2. Search for related issues that cover what you're going to work on. It could help to mention there that you will work on the issue.
Issues labeled [good first issue](https://github.com/NixOS/nix/labels/good-first-issue) should be relatively easy to fix and are likely to get merged quickly.
Pull requests addressing issues labeled [idea approved](https://github.com/NixOS/nix/labels/idea%20approved) are especially welcomed by maintainers and will receive prioritised review.
3. Check the [Nix reference manual](https://nixos.org/manual/nix/unstable/contributing/hacking.html) for information on building Nix and running its tests.
For contributions to the command line interface, please check the [CLI guidelines](https://nixos.org/manual/nix/unstable/contributing/cli-guideline.html).
4. Make your changes!
5. [Create a pull request](https://docs.github.com/en/pull-requests/collaborating-with-pull-requests/proposing-changes-to-your-work-with-pull-requests/creating-a-pull-request) for your changes.
* Link related issues in your pull request to inform interested parties and future contributors about your change.
* Make sure to have [a clean history of commits on your branch by using rebase](https://www.digitalocean.com/community/tutorials/how-to-rebase-and-update-a-pull-request).
If your pull request closes one or multiple issues, note that in the description using `Closes: #<number>`, as it will then happen automatically when your change is merged.
* [Mark the pull request as draft](https://docs.github.com/en/pull-requests/collaborating-with-pull-requests/proposing-changes-to-your-work-with-pull-requests/changing-the-stage-of-a-pull-request) if you're not done with the changes.
6. Do not expect your pull request to be reviewed immediately.
Nix maintainers follow a [structured process for reviews and design decisions](https://github.com/NixOS/nix/tree/master/maintainers#project-board-protocol), which may or may not prioritise your work.
Following this checklist will make the process smoother for everyone:
- [ ] Fixes an [idea approved](https://github.com/NixOS/nix/labels/idea%20approved) issue
- [ ] User documentation in the [manual](..doc/manual/src)
- [ ] API documentation in header files
- [ ] Code and comments are self-explanatory
- [ ] Commit message explains **why** the change was made
- [ ] New feature or incompatible change: updated [release notes](./doc/manual/src/release-notes/rl-next.md)
7. If you need additional feedback or help to getting pull request into shape, ask other contributors using [@mentions](https://docs.github.com/en/get-started/writing-on-github/getting-started-with-writing-and-formatting-on-github/basic-writing-and-formatting-syntax#mentioning-people-and-teams).
## Making changes to the Nix manual
The Nix reference manual is hosted on https://nixos.org/manual/nix.
The underlying source files are located in [`doc/manual/src`](./doc/manual/src).
For small changes you can [use GitHub to edit these files](https://docs.github.com/en/repositories/working-with-files/managing-files/editing-files)
For larger changes see the [Nix reference manual](https://nixos.org/manual/nix/unstable/contributing/hacking.html).
## Getting help
Whenever you're stuck or do not know how to proceed, you can always ask for help.
The appropriate channels to do so can be found on the [NixOS Community](https://nixos.org/community/) page.
[AC_MSG_ERROR([Nix requires libeditline; it was not found via pkg-config, but via its header, but required functions do not work. Maybe it is too old? >= 1.14 is required.])])
AS_HELP_STRING([--disable-cpuid], [Do not determine microarchitecture levels with libcpuid (relevant to x86_64 only)]))
if test "x$enable_cpuid" != "xno"; then
PKG_CHECK_MODULES([LIBCPUID], [libcpuid],
[CXXFLAGS="$LIBCPUID_CFLAGS $CXXFLAGS"
have_libcpuid=1
AC_DEFINE([HAVE_LIBCPUID], [1], [Use libcpuid])]
)
fi
fi
AC_SUBST(HAVE_LIBCPUID, [$have_libcpuid])
# Look for libseccomp, required for Linux sandboxing.
case "$host_os" in
linux*)
AC_ARG_ENABLE([seccomp-sandboxing],
AS_HELP_STRING([--disable-seccomp-sandboxing],[Don't build support for seccomp sandboxing (only recommended if your arch doesn't support libseccomp yet!)
]))
if test "x$enable_seccomp_sandboxing" != "xno"; then
PKG_CHECK_MODULES([LIBSECCOMP], [libseccomp],
[CXXFLAGS="$LIBSECCOMP_CFLAGS $CXXFLAGS"])
have_seccomp=1
AC_DEFINE([HAVE_SECCOMP], [1], [Whether seccomp is available and should be used for sandboxing.])
else
have_seccomp=
fi
;;
*)
have_seccomp=
;;
esac
AC_SUBST(HAVE_SECCOMP, [$have_seccomp])
# Look for aws-cpp-sdk-s3.
AC_LANG_PUSH(C++)
AC_CHECK_HEADERS([aws/s3/S3Client.h],
[AC_DEFINE([ENABLE_S3], [1], [Whether to enable S3 support via aws-sdk-cpp.]) enable_s3=1],
[AC_DEFINE([ENABLE_S3], [0], [Whether to enable S3 support via aws-sdk-cpp.]) enable_s3=])
Thisfunctionisonlyavailableifthe[${experimental-feature}](@docroot@/contributing/experimental-features.md#xp-feature-${experimental-feature}) experimental feature is enabled.
Previously a `.drv` that was truncated in the middle of a string would case nix to enter an infinite loop, eventually exhausting all memory and crashing.
synopsis: Duplicate attribute reports are more accurate
cls: 557
---
Duplicate attribute errors are now more accurate, showing the path at which an error was detected rather than the full, possibly longer, path that caused the error.
Error reports are now
```ShellSession
$ nix eval --expr '{ a.b = 1; a.b.c.d = 1; }'
error: attribute 'a.b' already defined at «string»:1:3
at «string»:1:12:
1| { a.b = 1; a.b.c.d = 1;
| ^
```
instead of
```ShellSession
$ nix eval --expr '{ a.b = 1; a.b.c.d = 1; }'
error: attribute 'a.b.c.d' already defined at «string»:1:3
synopsis: fix duplicate attribute error positions for `inherit`
prs: 9874
---
When an inherit caused a duplicate attribute error the position of the error was not reported correctly, placing the error with the inherit itself or at the start of the bindings block instead of the offending attribute name.
synopsis: "`inherit (x) ...` evaluates `x` only once"
prs: 9847
---
`inherit (x) a b ...` now evaluates the expression `x` only once for all inherited attributes rather than once for each inherited attribute.
This does not usually have a measurable impact, but side-effects (such as `builtins.trace`) would be duplicated and expensive expressions (such as derivations) could cause a measurable slowdown.
synopsis: Experimental REPL support for documentation comments using `:doc`
cls: 564
---
Using `:doc` in the REPL now supports showing documentation comments when defined on a function.
Previously this was only able to document builtins, however it now will show comments defined on a lambda as well.
This support is experimental and relies on an embedded version of [nix-doc](https://github.com/lf-/nix-doc).
The logic also supports limited Markdown formatting of doccomments and should easily support any [RFC 145](https://github.com/NixOS/rfcs/blob/master/rfcs/0145-doc-strings.md)
compatible documentation comments in addition to simple commented documentation.
Qyriad
Artemis Tosini
eldritch horrors
alois31
Delan Azabani
jade
Lunaphied
Robert Hensing
Maximilian Bosch
kloenk
Ilya K
julia
Pierre Bourdon
Mario Rodas
Linus Heckemann
Nikodem Rabuliński
raito
terru -
Tom Hubrecht
puck
Alyssa Ross
Yorick
FireFly
Patrick Jackson