When the configured maximum depth has been reached, attribute sets and lists
are printed with ellipsis to indicate the elision of nested items. Previously,
this happened even in case the structure being printed is empty, so that such
items do not in fact exist. This is confusing, so stop doing it.
Change-Id: I0016970dad3e42625e085dc896e6f476b21226c9
The repeated value detection logic exists so that the occurrence of large
common substructures does not fill up the screen or the computer's memory.
However, empty attribute sets and derivations (when their detection is enabled)
are always cheap to print, and in practice I have observed them to make up a
significant majority of the cases where I was annoyed by the repeated value
detection kicking in. Furthermore, `nix-instantiate --eval` already disables
this logic for empty attribute sets, and empty lists are already exempted
everywhere. For these reasons, always print empty attribute sets and
derivations as what they are.
Change-Id: I5dac8e7739f9d726b76fd0521ec46f38af94463f
When pretty-printing is enabled, previously an unforced thunk would trigger
indentation, even when it subsequently does not evaluate to a nested structure.
The resulting output looked inconsistent, and furthermore pretty-printing was
not idempotent (since pretty-printing the same value again, which is now fully
evaluated, will not trigger indentation).
When strict evaluation is enabled, force the item before inspecting its type,
so that it is properly known whether it contains a nested structure.
Furthermore, there is no need to cause indentation for unforced thunks, since
the very next operation will be printing them as `«thunk»`.
This is mostly a port of https://github.com/NixOS/nix/pull/11100 , but we only
force the item when it's going to be forced anyway due to strict
pretty-printing, and a new test was written since the REPL testing framework in
Lix is different.
Co-Authored-By: Robert Hensing <robert@roberthensing.nl>
Change-Id: Ib7560fe531d09e05ca6b2037a523fe21a26d9d58
this is cursed. deeply and profoundly cursed. under NO CIRCUMSTANCES
must protocol serializer helpers be applied to temporaries! doing so
will inevitably cause dangling references and cause the entire thing
to crash. we need to do this even so to get rid of boost coroutines,
and likewise to encapsulate the serializers we suffer today at least
a little bit to allow a gradual migration to an actual IPC protocol.
(this isn't a problem that's unique to generators. c++ coroutines in
general cannot safely take references to arbitrary temporaries since
c++ does not have a lifetime system that can make this safe. -sigh-)
Change-Id: I2921ba451e04d86798752d140885d3c5cc08e146
this doesn't have a test because this code path is only reached by
clients that predate 2.4, and we really should not be caring about
those any more right now. even the test suite doesn't, and the few
tests that might care are disabled because they will not even work
Change-Id: Id9eb190065138fedb2c7d90c328ff9eb9d97385b
this is not completely necessary at this point because the parser right
now already returns a generator to pass through all input data it read,
but the nar parser *was* very lax and would accept nars that weren't in
canonical form (defined as the form dumpPath would return). nar hashing
depends on these things, and as such rewriting the parser now allows us
to reject non-canonical nars that extract to the same store contents as
their canonical counterpart but have different nar hashes despite that.
Change-Id: Iccd319e3bd5912d8297014c84c495edc59019bb7
This was filed as https://github.com/nixos/nix/issues/7584, but as far
as I can tell, the previous solution of POLLHUP works just fine on macOS
14. I've also tested on an ancient machine with macOS 10.15.7, which
also has POLLHUP work correctly.
It's possible this might regress some older versions of macOS that have
a kernel bug, but I went looking through the history on the sources and
didn't find anything that looked terribly convincingly like a bug fix
between 2020 and today. If such a broken version exists, it seems pretty
reasonable to suggest simply updating the OS.
Change-Id: I178a038baa000f927ea2cbc4587d69d8ab786843
This is caused by pthread_cancel effectively throwing a
not-specifically-identifiable C++ exception into the targeted thread,
which, if it is not rethrown, terminates the process entirely.
This is rather "impolite" behaviour, we would say. But thread
cancellation is *always* busted, and we should simply not use it where
unnecessary. It's particularly unnecessary when what we *actually* need
it for is, err, interrupting a poll(2).
That can in turn be achieved by simply listening to more stuff in the
poll, namely, a pipe, which we send a character to when needing to
stop the thread.
While looking at this code, we also investigated whether any of the
poll() madness is required, or was even *ever* required. Curiously we
found in the XNU kernel source code that the thing about needing to
listen to POLLHUP is probably *correct*, but switching it to POLLRDNORM
should not have made any difference at all. We've left a FIXME to look
into that further because what's written here is super janky.
94d3b45284/bsd/kern/sys_generic.c (L1751-L1758)
This is the crash on some Hydra machines:
Thread 1 (Thread 0x7f56b77776c0 (LWP 955542) (Exiting)):
0 0x00007f56b8e9b7dc in __pthread_kill_implementation () from /nix/store/m71p7f0nymb19yn1dascklyya2i96jfw-glibc-2.39-52/lib/libc.so.6
1 0x00007f56b8e49516 in raise () from /nix/store/m71p7f0nymb19yn1dascklyya2i96jfw-glibc-2.39-52/lib/libc.so.6
2 0x00007f56b8e31935 in abort () from /nix/store/m71p7f0nymb19yn1dascklyya2i96jfw-glibc-2.39-52/lib/libc.so.6
3 0x00007f56b8e327f3 in __libc_message_impl.cold () from /nix/store/m71p7f0nymb19yn1dascklyya2i96jfw-glibc-2.39-52/lib/libc.so.6
4 0x00007f56b8e8e8e9 in __libc_fatal () from /nix/store/m71p7f0nymb19yn1dascklyya2i96jfw-glibc-2.39-52/lib/libc.so.6
5 0x00007f56b8ea23c4 in unwind_cleanup () from /nix/store/m71p7f0nymb19yn1dascklyya2i96jfw-glibc-2.39-52/lib/libc.so.6
6 0x00007f56b9d2a1b8 in nix::triggerInterrupt() [clone .cold] () from /nix/store/sahgw550p621m9dy1pd7whl9c5g1g0p7-lix-2.90.0-rc1/lib/liblixutil.so
7 0x00007f56b990ac9d in std:🧵:_State_impl<std:🧵:_Invoker<std::tuple<nix::MonitorFdHup::MonitorFdHup(int)::{lambda()#1}> > >::_M_run() () from /nix/store/sahgw550p621m9dy1pd7whl9c5g1g0p7-lix-2.90.0-rc1/lib/liblixstore.so
8 0x00007f56b90e86d3 in execute_native_thread_routine () from /nix/store/c6r62m84hywf4i6qq1h28f13zv38yqyp-gcc-13.3.0-lib/lib/libstdc++.so.6
9 0x00007f56b8e99a42 in start_thread () from /nix/store/m71p7f0nymb19yn1dascklyya2i96jfw-glibc-2.39-52/lib/libc.so.6
10 0x00007f56b8f1905c in clone3 () from /nix/store/m71p7f0nymb19yn1dascklyya2i96jfw-glibc-2.39-52/lib/libc.so.6
As for testing, we've started a daemon with this change and verified it
deals with HUPs correctly on x86_64-linux, but I don't think we can
easily test the destructor behaviour without whatever Hydra was
doing that broke.
Change-Id: I29c7de0425674494b6e43c075810126c3ff77363
This also bans various sneaking of negative numbers from the language
into unsuspecting builtins as was exposed while auditing the
consequences of changing the Nix language integer type to a newtype.
It's unlikely that this change comprehensively ensures correctness when
passing integers out of the Nix language and we should probably add a
checked-narrowing function or something similar, but that's out of scope
for the immediate change.
During the development of this I found a few fun facts about the
language:
- You could overflow integers by converting from unsigned JSON values.
- You could overflow unsigned integers by converting negative numbers
into them when going into Nix config, into fetchTree, and into flake
inputs.
The flake inputs and Nix config cannot actually be tested properly
since they both ban thunks, however, we put in checks anyway because
it's possible these could somehow be used to do such shenanigans some
other way.
Note that Lix has banned Nix language integer overflows since the very
first public beta, but threw a SIGILL about them because we run with
-fsanitize=signed-overflow -fsanitize-undefined-trap-on-error in
production builds. Since the Nix language uses signed integers, overflow
was simply undefined behaviour, and since we defined that to trap, it
did.
Trapping on it was a bad UX, but we didn't even entirely notice
that we had done this at all until it was reported as a bug a couple of
months later (which is, to be fair, that flag working as intended), and
it's got enough production time that, aside from code that is IMHO buggy
(and which is, in any case, not in nixpkgs) such as
lix-project/lix#445, we don't think
anyone doing anything reasonable actually depends on wrapping overflow.
Even for weird use cases such as doing funny bit crimes, it doesn't make
sense IMO to have wrapping behaviour, since two's complement arithmetic
overflow behaviour is so *aggressively* not what you want for *any* kind
of mathematics/algorithms. The Nix language exists for package
management, a domain where bit crimes are already only dubiously in
scope to begin with, and it makes a lot more sense for that domain for
the integers to never lose precision, either by throwing errors if they
would, or by being arbitrary-precision.
This change will be ported to CppNix as well, to maintain language
consistency.
Fixes: lix-project/lix#423
Change-Id: I51f253840c4af2ea5422b8a420aa5fafbf8fae75
The actual motive here is the avoidance of integer overflow if we were
to make these use checked NixInts and retain the subtraction.
However, the actual *intent* of this code is a three-way comparison,
which can be done with operator<=>, so we should just do *that* instead.
Change-Id: I7f9a7da1f3176424b528af6d1b4f1591e4ab26bf
upcast_goal was only ever needed to break circular includes, but the
same solution that gave us upcast_goal also lets us fully remove it:
just upcast goals without a wrapper function, but only in .cc files.
Change-Id: I9c71654b2535121459ba7dcfd6c5da5606904032
this will let us turn copyNAR into a generator as well, which in turn is
necessary to turn the users of copyNAR into generators without resorting
to sinkToSource coroutines. currently this uses the SerializingTransform
in all cases, even for copyNAR where it is not necessary. should this be
a performance problem we can easily swap out the transform for one which
does not produce any bytes of its own, but that should not be necessary.
Change-Id: I7e685879318fcbb78d8b88abfddd7752360eb0ce
the sole remaining user of this function can use makeDecompressionSource
instead, while making the sinkToSource in the caller unnecessary as well
Change-Id: I4258227b5dbbb735a75b477d8a57007bfca305e9
the rewriting sink was just broken. when given a rewrite set that
contained a key that is also a proper infix of another key it was
possible to produce an incorrectly rewritten result if the writer
used the wrong block size. fixing this duplicates rewriteStrings,
to avoid this we'll rewrite rewriteStrings to use RewritingSource
in a new mode that'll allow rewrites we had previously forbidden.
Change-Id: I57fa0a9a994e654e11d07172b8e31d15f0b7e8c0
This updates the version of rnix used and refactors the code generally
to be more precise and capable in it's identification of both lambdas
and determining which documentation comments are attached.
Change-Id: Ib0dddabd71f772c95077f9d7654023b37a7a1fd2
`nix-collect-garbage --dry-run` previously elided the entire garbage
collection check, meaning that it would just exit the script without
printing anything.
This change makes the dry run flag instead set the GC action to
`gcReturnDead` rather than `gcDeleteDead`, and then continue with the
script. So if you set `--dry-run`, it will print the paths it *would*
have garbage collected, but not actually delete them.
I filed a bug for this: lix-project/lix#432 but then realised I could give fixing it a go myself.
Change-Id: I062dbf1a80bbab192b5fd0b3a453a0b555ad16f2
DrvInfo's query methods all use mutable fields to cache, but like.
that's basically the entire interface for DrvInfo. Not only that, but
these formerly-const-marked functions can even throw due to eval errors!
Changing this only required removing some `const` markers in nix-env,
and changing a single inline `queryInstalled()` call to be an lvalue
instead.
Change-Id: I796807118f3b35b0e93668b5e28210d9e521b2ae
Activities can set display attributes in their log output using the "Select
Graphics Rendition" functionality. To prevent interfering with subsequent text
displayed, these should be reset after writing the log line. The multiline
progress bar neglected to do this, resulting for example in a colorised
"building …" header in the next line. Reset the attributes properly, like the
standard progress bar already does.
Change-Id: I1dc69f4a1d747a76b83e8721a72d9bb0e5554488
This rather simple function existed just to check some flags,
but the response varies by platform. This is a perfect case for
our subclasses.
Change-Id: Ieb1732a8d024019236e0d0028ad843a24ec3dc59
size tracking can be done with a LengthSink and a tee. match tracking
was defeated by never having done any match tracking, all users would
see the same (empty) set of matches at all times. match tracking with
bytes offsets alone would not be sufficient in the general case, only
because computeHashModulo uses a single rewrite could it have worked.
Change-Id: Idb214b5222e0ea24f450f5505712a342b63d7570
this much more closely mimics what is actually happening: we're reading
data from somewhere else, actively, rather than passively waiting. with
the data flow matching the underlying system interactions better we can
remove a few sinkToSource calls that merely exists to undo the mismatch
caused by not treating subprocess output as a data source to begin with
Change-Id: If4abfc2f8398fb5e88c9b91a8bdefd5504bb2d11
this will let us also return a source for the program output later,
which will in turn make sinkToSource unnecessary for program output
processing. this may also reopen a path for provigin program input,
but that still needs a proper async io framework to avoid problems.
Change-Id: Iaf93f47db99c38cfaf134bd60ed6a804d7ddf688
Turns errors like this:
let
throwMsg = a: throw (a + " invalid bar");
in throwMsg "bullshit"
error:
… from call site
at «string»:3:4:
2| throwMsg = a: throw (a + " invalid bar");
3| in throwMsg "bullshit"
| ^
… while calling 'throwMsg'
at «string»:2:14:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
error: bullshit invalid bar
into errors like this:
let
throwMsg = a: throw (a + " invalid bar");
in throwMsg "bullshit"
error:
… from call site
at «string»:3:4:
2| throwMsg = a: throw (a + " invalid bar");
3| in throwMsg "bullshit"
| ^
… while calling 'throwMsg'
at «string»:2:14:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
… caused by explicit throw
at «string»:2:17:
1| let
2| throwMsg = a: throw (a + " invalid bar");
| ^
3| in throwMsg "bullshit"
error: bullshit invalid bar
Change-Id: I593688928ece20f97999d1bf03b2b46d9ac338cb
Turns errors like:
let
somepkg.src = throw "invalid foobar";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
error: invalid foobar
into errors like:
let
somepkg.src = throw "invalid foobar";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
… while evaluating 'somepkg.src' to select 'meta' on it
at «string»:3:4:
2| somepkg.src = throw "invalid foobar";
3| in somepkg.src.meta
| ^
… while calling the 'throw' builtin
at «string»:2:17:
1| let
2| somepkg.src = throw "invalid foobar";
| ^
3| in somepkg.src.meta
error: invalid foobar
And for type errors, from:
let
somepkg.src = "I'm not an attrset";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = "I'm not an attrset";
| ^
3| in somepkg.src.meta
… while selecting an attribute
at «string»:3:4:
2| somepkg.src = "I'm not an attrset";
3| in somepkg.src.meta
| ^
error: expected a set but found a string: "I'm not an attrset"
into:
let
somepkg.src = "I'm not an attrset";
in somepkg.src.meta
error:
… while evaluating the attribute 'src.meta'
at «string»:2:3:
1| let
2| somepkg.src = "I'm not an attrset";
| ^
3| in somepkg.src.meta
… while selecting 'meta' on 'somepkg.src'
at «string»:3:4:
2| somepkg.src = "I'm not an attrset";
3| in somepkg.src.meta
| ^
error: expected a set but found a string: "I'm not an attrset"
For the low price of an enumerate() and a lambda you too can have the
incorrect line of code actually show up in the trace!
Change-Id: Ic1491c86e33c167891bdac9adad6224784760bd6
Turns errors like:
let
errpkg = throw "invalid foobar";
in errpkg.meta
error:
… while calling the 'throw' builtin
at «string»:2:12:
1| let
2| errpkg = throw "invalid foobar";
| ^
3| in errpkg.meta
error: invalid foobar
into errors like:
let
errpkg = throw "invalid foobar";
in errpkg.meta
error:
… while evaluating 'errpkg' to select 'meta' on it
at «string»:3:4:
2| errpkg = throw "invalid foobar";
3| in errpkg.meta
| ^
… while calling the 'throw' builtin
at «string»:2:12:
1| let
2| errpkg = throw "invalid foobar";
| ^
3| in errpkg.meta
error: invalid foobar
For the low price of one try/catch, you too can have the incorrect line
of code actually show up in the trace!
Change-Id: If8d6200ec1567706669d405c34adcd7e2d2cd29d
Add a platform-specific function for starting sandboxed child.
Generally this just means startProcess, but on Linux we use flags
for clone to start a new namespace
Change-Id: I41c8aba62676a162388bbe5ab8a7518904c7b058
Add a new OS-specific hook called `prepareSandbox`, run before forking
On Darwin this is empty as nothing is required,
on Linux this creates the chroot directory and adds basic files,
and on platforms using a fallback this throws an exception
Change-Id: Ie30c38c387f2e0e5844b2afa32fd4d33b1180dae
generators are a better basis for serializers than streaming into sinks
as we do currently for many reasons, such as being usable as sources if
one wishes to (without requiring an intermediate sink to serialize full
data sets into memory, or boost coroutines to turn sinks into sources),
composing more naturally (as one can just yield a sub-generator instead
of being forced to wrap entire substreams into clunky functions or even
more clunky custom types to implement operator<< on), allowing wrappers
to transform data with clear ownership semantics (removing the need for
explicit memory allocations and Source wrappers), and many other things
Change-Id: I361d89ff556354f6930d9204f55117565f2f7f20
the `*Source` name is a slight misnomer since we do also have a
Source type, but we can probably live with this for time being.
Change-Id: I54eb2e59a4009014e324797f16b80b962759c7d3
not used anywhere yet, but we'll use this a lot soon for generators that
return file contents, wire protocol fragments, or indeed any byte stream
Change-Id: I01a46f9bf9d75aaf4a5d7662773b99f498862a28
this will be the basis of non-boost coroutines in lix. anything that is
a boost coroutine *should* be representable with a Generator coroutine,
and many things that are not currently boost coroutines but behave much
like one (such as, notably, serializers) should be as well. this allows
us to greatly simplify many things that look like iteration but aren't.
Change-Id: I2cebcefa0148b631fb30df4c8cfa92167a407e34
not printing activities at all when no progress information is available
hides *all* progress information from e.g. flake show. this is not ideal
and needs to be fixed, but the fix *still* has problems with flake show:
in multiline mode we will overwrite all useful flake show output as soon
as the progress bar is redrawn. flake show output is also mangled in any
number of other situations (like -v being set), so we should probably be
not too worried about it and fix progress reporting properly another day
Change-Id: I6d39d670e261bbae00560b6a8e15dec8e16b35c4
Previously, the progress bar had two subtly different states in which the bar
would not actually render, both with their own shortcomings: inactive (which
was irreversible) and paused (reversible, but swallowing logs). Furthermore,
there was no way of resetting the statistics, so a very bad solution was
implemented (243c0f18da) that would create a new
logger for each line of the repl, leaking the previous one and discarding the
value of printBuildLogs. Finally, if stderr was not attached to a TTY, the
update thread was started even though the logger was not active, violating the
invariant required by the destructor (which is not observed because the logger
is leaked).
In this commit, the two aforementioned states are unified into a single one,
which can be exited again, correctly upholds the invariant that the update
thread is only running while the progress bar is active, and does not swallow
logs. The latter change in behavior is not expected to be a problems in the
rare cases where the paused state was used before, since other loggers (like
the simple one) don't exhibit it anyway. The startProgressBar/stopProgressBar
API is removed due to being a footgun, and a new method for properly resetting
the progress is added.
Co-Authored-By: Qyriad <qyriad@qyriad.me>
Change-Id: I2b7c3eb17d439cd0c16f7b896cfb61239ac7ff3a
The `allow-flake-configuration` option allows the user to control whether to
accept configuration options supplied by flakes. Unfortunately, setting this
to false really meant "ask each time" (with an option to remember the choice
for each specific option encountered). Let no mean no, and introduce (and
default to) a separate value for the "ask each time" behaviour.
Co-Authored-By: Jade Lovelace <lix@jade.fyi>
Change-Id: I7ccd67a95bfc92cffc1ebdc972d243f5191cc1b4
We previously allowed you to map any flake URL to any other flake URL,
including shorthand flakerefs, indirect flake URLs like `flake:nixpkgs`,
direct flake URLs like `github:NixOS/nixpkgs`, or local paths.
But flake registry entries mapping from direct flake URLs often come
from swapping the 'from' and 'to' arguments by accident, and even when
created intentionally, they may not actually work correctly.
This patch rejects those URLs (and fully-qualified flake: URLs), making
it harder to swap the arguments by accident.
Fixes#181.
Change-Id: I24713643a534166c052719b8770a4edfcfdb8cf3
This is a shameless layering violation in favour of UX. It falls back
trivially to "unknown", so it's purely a UX feature.
Diagnostic sample:
```
error: hash mismatch in fixed-output derivation '/nix/store/sjfw324j4533lwnpmr5z4icpb85r63ai-x1.drv':
likely URL: https://meow.puppy.forge/puppy.tar.gz
specified: sha256-AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=
got: sha256-a1Qvp3FOOkWpL9kFHgugU1ok5UtRPSu+NwCZKbbaEro=
```
Change-Id: I873eedcf7984ab23f57a6754be00232b5cb5b02c
this most notably affects `nix eval`: if there is no progress bar to be
shown and no activities going on we should not print anything at all. a
progress bar with no activities would print a bunch of terminal escapes
*and a space*, which is not helpful in simple cases like nix eval -E 1.
notably this does *not* affect nix eval called on non-terminal outputs,
but it is slightly confusing nevertheless (and not difficult to avoid).
fixes lix-project/lix#424
Change-Id: Iee793c79ba5a485d6606e0d292ed2eae6dfb7216
this gives about 20% performance improvements on pure parsing. obviously
it will be less on full eval, but depending on how much parsing is to be
done (e.g. including hackage-packages.nix or not) it's more like 4%-10%.
this has been tested (with thousands of core hours of fuzzing) to ensure
that the ASTs produced by the new parser are exactly the same as the old
one would have produced. error messages will change (sometimes by a lot)
and are not yet perfect, but we would rather leave this as is for later.
test results for running only the parser (excluding the variable binding
code) in a tight loop with inputs and parameters as given are promising:
- 40% faster on lix's package.nix at 10000 iterations
- 1.3% faster on nixpkgs all-packages.nix at 1000 iterations
- equivalent on all of nixpkgs concatenated at 100 iterations
(excluding invalid files, each file surrounded with parens)
more realistic benchmarks are somewhere in between the extremes, parsing
once again getting the largest uplift. other realistic workloads improve
by a few percentage points as well, notably system builds are 4% faster.
Benchmarks summary (from ./bench/summarize.jq bench/bench-*.json)
old/bin/nix --extra-experimental-features 'nix-command flakes' eval -f bench/nixpkgs/pkgs/development/haskell-modules/hackage-packages.nix
mean: 0.408s ± 0.025s
user: 0.355s | system: 0.033s
median: 0.389s
range: 0.388s ... 0.442s
relative: 1
new/bin/nix --extra-experimental-features 'nix-command flakes' eval -f bench/nixpkgs/pkgs/development/haskell-modules/hackage-packages.nix
mean: 0.332s ± 0.024s
user: 0.279s | system: 0.033s
median: 0.314s
range: 0.313s ... 0.361s
relative: 0.814
---
old/bin/nix --extra-experimental-features 'nix-command flakes' eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
mean: 6.133s ± 0.022s
user: 5.395s | system: 0.437s
median: 6.128s
range: 6.099s ... 6.183s
relative: 1
new/bin/nix --extra-experimental-features 'nix-command flakes' eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
mean: 5.925s ± 0.025s
user: 5.176s | system: 0.456s
median: 5.934s
range: 5.861s ... 5.943s
relative: 0.966
---
GC_INITIAL_HEAP_SIZE=10g old/bin/nix eval --extra-experimental-features 'nix-command flakes' --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
mean: 4.503s ± 0.027s
user: 3.731s | system: 0.547s
median: 4.499s
range: 4.478s ... 4.541s
relative: 1
GC_INITIAL_HEAP_SIZE=10g new/bin/nix eval --extra-experimental-features 'nix-command flakes' --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
mean: 4.285s ± 0.031s
user: 3.504s | system: 0.571s
median: 4.281s
range: 4.221s ... 4.328s
relative: 0.951
---
old/bin/nix --extra-experimental-features 'nix-command flakes' search --no-eval-cache github:nixos/nixpkgs/e1fa12d4f6c6fe19ccb59cac54b5b3f25e160870 hello
mean: 16.475s ± 0.07s
user: 14.088s | system: 1.572s
median: 16.495s
range: 16.351s ... 16.536s
relative: 1
new/bin/nix --extra-experimental-features 'nix-command flakes' search --no-eval-cache github:nixos/nixpkgs/e1fa12d4f6c6fe19ccb59cac54b5b3f25e160870 hello
mean: 15.973s ± 0.013s
user: 13.558s | system: 1.615s
median: 15.973s
range: 15.946s ... 15.99s
relative: 0.97
---
Change-Id: Ie66ec2d045dec964632c6541e25f8f0797319ee2
This reverts commit 35eec921af.
Reason for revert: Regressed nix-eval-jobs, and it appears to be this change is buggy/missing a case. It just needs another pass.
Code causing the problem in n-e-j, when invoked with `nix-eval-jobs --flake '.#hydraJobs'`:
```
n-e-j/tests/assets » ../../build/src/nix-eval-jobs --meta --workers 1 --flake .#hydraJobs
warning: unknown setting 'trusted-users'
warning: `--gc-roots-dir' not specified
error: unsupported Git input attribute 'dir'
error: worker error: error: unsupported Git input attribute 'dir'
```
```
nix::Value *vRoot = [&]() {
if (args.flake) {
auto [flakeRef, fragment, outputSpec] =
nix::parseFlakeRefWithFragmentAndExtendedOutputsSpec(
args.releaseExpr, nix::absPath("."));
nix::InstallableFlake flake{
{}, state, std::move(flakeRef), fragment, outputSpec,
{}, {}, args.lockFlags};
return flake.toValue(*state).first;
} else {
return releaseExprTopLevelValue(*state, autoArgs, args);
}
}();
```
Inspecting the program behaviour reveals that `dir` was in fact set in the URL going into the fetcher. This is in turn because unlike in the case changed in this commit, it was not erased before handing it to libfetchers, which is probably just a mistake.
```
(rr) up
3 0x00007ffff60262ae in nix::fetchers::Input::fromURL (url=..., requireTree=requireTree@entry=true) at src/libfetchers/fetchers.cc:39
warning: Source file is more recent than executable.
39 auto res = inputScheme->inputFromURL(url, requireTree);
(rr) p url
$1 = (const nix::ParsedURL &) @0x7fffdc874190: {url = "git+file:///home/jade/lix/nix-eval-jobs",
base = "git+file:///home/jade/lix/nix-eval-jobs", scheme = "git+file", authority = std::optional<std::string> = {[contained value] = ""},
path = "/home/jade/lix/nix-eval-jobs", query = std::map with 1 element = {["dir"] = "tests/assets"}, fragment = ""}
(rr) up
4 0x00007ffff789d904 in nix::parseFlakeRefWithFragment (url=".#hydraJobs", baseDir=std::optional<std::string> = {...},
allowMissing=allowMissing@entry=false, isFlake=isFlake@entry=true) at src/libexpr/flake/flakeref.cc:179
warning: Source file is more recent than executable.
179 FlakeRef(Input::fromURL(parsedURL, isFlake), getOr(parsedURL.query, "dir", "")),
(rr) p parsedURL
$2 = {url = "git+file:///home/jade/lix/nix-eval-jobs", base = "git+file:///home/jade/lix/nix-eval-jobs", scheme = "git+file",
authority = std::optional<std::string> = {[contained value] = ""}, path = "/home/jade/lix/nix-eval-jobs", query = std::map with 1 element = {
["dir"] = "tests/assets"}, fragment = ""}
(rr) list
174
175 if (pathExists(flakeRoot + "/.git/shallow"))
176 parsedURL.query.insert_or_assign("shallow", "1");
177
178 return std::make_pair(
179 FlakeRef(Input::fromURL(parsedURL, isFlake), getOr(parsedURL.query, "dir", "")),
180 fragment);
181 }
```
Change-Id: Ib55a882eaeb3e59228857761dc1e3b2e366b0f5e
This is a squash of upstream PRs #10303, #10312 and #10883.
fix: Treat empty TMPDIR as unset
Fixes an instance of
nix: src/libutil/util.cc:139: nix::Path nix::canonPath(PathView, bool): Assertion `path != ""' failed.
... which I've been getting in one of my shells for some reason.
I have yet to find out why TMPDIR was empty, but it's no reason for
Nix to break.
(cherry picked from commit c3fb2aa1f9d1fa756dac38d3588c836c5a5395dc)
fix: Treat empty XDG_RUNTIME_DIR as unset
See preceding commit. Not observed in the wild, but is sensible
and consistent with TMPDIR behavior.
(cherry picked from commit b9e7f5aa2df3f0e223f5c44b8089cbf9b81be691)
local-derivation-goal.cc: Reuse defaultTempDir()
(cherry picked from commit fd31945742710984de22805ee8d97fbd83c3f8eb)
fix: remove usage of XDG_RUNTIME_DIR for TMP
(cherry picked from commit 1363f51bcb24ab9948b7b5093490a009947f7453)
tests/functional: Add count()
(cherry picked from commit 6221770c9de4d28137206bdcd1a67eea12e1e499)
Remove uncalled for message
(cherry picked from commit b1fe388d33530f0157dcf9f461348b61eda13228)
Add build-dir setting
(cherry picked from commit 8b16cced18925aa612049d08d5e78eccbf0530e4)
Change-Id: Ic7b75ff0b6a3b19e50a4ac8ff2d70f15c683c16a
Following the latest hacking.md currently fails because of a missing
include in upstream editline. This patch fixes the build by adding
that missing include.
Fixes#410.
Change-Id: Iefd4cb687ed3da71ccda9fe9624f38e6ef4623e5
this was only used in one place, and that place has been rewritten to
use a temporary file instead. keeping this around is not very helpful
at this time, and in any case we'd be better off rewriting subprocess
handling in rust where we not only have a much safer library for such
things but also async frameworks necessary for this easily available.
Change-Id: I6f8641b756857c84ae2602cdf41f74ee7a1fda02
we want to remove runProgram's ability to provide stdin to a process
because the concurrency issues of handling both stdin and stdout are
much more pronounced once runProgram returns not is collected output
but a source. this is possible in the current c++ framework, however
it isn't necessary in almost all cases (as demonstrated by only this
single user existing) and in much better handled with a proper async
concurrency model that lets the caller handle both at the same time.
Change-Id: I29da1e1ad898d45e2e33a7320b246d5003e7712b
This is primarily for readability, but iwrc chaining std::string's
operator+ is also pretty scuffed performance-wise, and this was doing a
lot of operator+ chainging.
Change-Id: I9f25235df153eb2bbb491f1ff7ebbeed9a8ec985
copy-constructing or assigning from pid_t can easily lead to duplicate
Pid instances for the same process if a pid_t was used carelessly, and
Pid itself was copy-constructible. both could cause surprising results
such as killing processes twice (which could become very problemantic,
but luckily modern systems don't reuse PIDs all that quickly), or more
than one piece of the code believing it owns a process when neither do
Change-Id: Ifea7445f84200b34c1a1d0acc2cdffe0f01e20c6
this is only used in one place, and only to set a nicer error message on
EndOfFile. the only caller that actually *catches* this exception should
provide an error message in that catch block rather than forcing support
for setting error message so deep into the stack. copyStorePath is never
called outside of PathSubstitutionGoal anyway, which catches everything.
Change-Id: Ifbae8706d781c388737706faf4c8a8b7917ca278
LocalDerivationGoal includes a large number of low-level sandboxing
primitives for Darwin and Linux, intermingled with ifdefs.
Start creating platform-specific classes to make it easier to add new
platforms and review platform-specific code.
This change only creates support infrastructure and moves two function,
more functions will be moved in future changes.
Change-Id: I9fc29fa2a7345107d4fc96c46fa90b4eabf6bb89
This comes quite often when the available job slots on all remote
builders are exhausted and this is pretty spammy.
This isn't really an issue, but expected behavior.
A better way to display this is a nom-like approach where all scheduled
builds are shown in a tree and pending builds are being marked as such
IMHO.
Change-Id: I6bc14e6054f84e3eb0768127b490e263d8cdcf89
The original idea was to fix lix#174, but for a user friendly solution,
I figured that we'd need more consistency:
* Invalid query params will cause an error, just like invalid
attributes. This has the following two consequences:
* The `?dir=`-param from flakes will be removed before the URL to be
fetched is passed to libfetchers.
* The tarball fetcher doesn't allow URLs with custom query params
anymore. I think this was questionable anyways given that an
arbitrary set of query params was silently removed from the URL you
wanted to fetch. The correct way is to use an attribute-set
with a key `url` that contains the tarball URL to fetch.
* Same for the git & mercurial fetchers: in that case it doesn't even
matter though: both fetchers added unused query params to the URL
that's passed from the input scheme to the fetcher (`url2` in the code).
It turns out that this was never used since the query parameters were
erased again in `getActualUrl`.
* Validation happens for both attributes and URLs. Previously, a lot of
fetchers validated e.g. refs/revs only when specified in a URL and
the validity of attribute names only in `inputFromAttrs`.
Now, all the validation is done in `inputFromAttrs` and `inputFromURL`
constructs attributes that will be passed to `inputFromAttrs`.
* Accept all attributes as URL query parameters. That also includes
lesser used ones such as `narHash`.
And "output" attributes like `lastModified`: these could be declared
already when declaring inputs as attribute rather than URL. Now the
behavior is at least consistent.
Personally, I think we should differentiate in the future between
"fetched input" (basically the attr-set that ends up in the lock-file)
and "unfetched input" earlier: both inputFrom{Attrs,URL} entrypoints
are probably OK for unfetched inputs, but for locked/fetched inputs
a custom entrypoint should be used. Then, the current entrypoints
wouldn't have to allow these attributes anymore.
Change-Id: I1be1992249f7af8287cfc37891ab505ddaa2e8cd
Add the log-formats `multiline` and `multiline-with-logs` which offer
multiple current active building status lines.
Change-Id: Idd8afe62f8591b5d8b70e258c5cefa09be4cab03
If we've consumed the entire input, that doesn't actually mean we're
done decompressing - there might be more output left. This worked (?)
in most cases because the input and output sizes are pretty comparable,
but sometimes they're not and then things get very funny.
Change-Id: I73435a654a911b8ce25119f713b80706c5783c1b
I did a whole bunch of `git log -S` to find out exactly when all these
things were obsoleted and found the commit in which their usage was
removed, which I have added in either the error message or a comment.
I've also made *some* of the version checks into static asserts for when
we update the minimum supported protocol version.
In the end this is not a lot of code we are deleting, but it's code that
we will never have to support into the future when we build a protocol
bridge, which is why I did it. It is not in the support baseline.
Change-Id: Iea3c80795c75ea74f328cf7ede7cbedf8c41926b
without this we will not be able to get rid of makeDecompressionSink,
which in turn will be necessary to get rid of sourceToSink (since the
libarchive archive wrapper *must* be a Source due to api limitations)
Change-Id: Iccd3d333ba2cbcab49cb5a1d3125624de16bce27
don't consume a sink, return a source instead. the only reason to not do
this is a very slight reduction in dynamic allocations, but since we are
going to *at least* do disk io that will not be a lot of overhead anyway
Change-Id: Iae2f879ec64c3c3ac1d5310eeb6a85e696d4614a
if we want have getFile return a source instead of consuming a sink
we'll have to disambiguate this overload another way, eg like this.
Change-Id: Ia26de2020c309a37e7ccc3775c1ad1f32e0a778b
This happened during a PathSubstitutionGoal of a .drv file:
substitution of '/tmp/jade/nix-test/ca/eval-store/store/1lj7lsq5y0f25mfbnq6d3zd0bw5ay33n-dependencies-input-2.drv'
What happened here is that since PathSubstitutionGoal is not a
DerivationGoal, in production builds, the UB was not caught, since it
would early-exit from failing a dynamic_cast to DerivationGoal * on the
very next line, but before the null reference was ever used.
This was nonetheless UB. The fix should be to just rearrange the two
lines; I don't think there is a further bug there, since *substituting a
.drv* **necessarily** means you cannot have the representation of
the derivation as would be necessary for drv to not be null there.
Test failure:
++(eval-store.sh:12) _RR_TRACE_DIR=/home/jade/.local/share/rr rr record -- nix build -f dependencies.nix --eval-store /tmp/jade/nix-test/ca/eval-store/eval-store -o /tmp/jade/nix-test/ca/eval-store/result
don't know how to build these paths:
/tmp/jade/nix-test/ca/eval-store/store/6y51mf0p57ggipgab6hdjabbvplzsicq-dependencies-top.drv
copying 1 paths...
copying path '/tmp/jade/nix-test/ca/eval-store/store/8027afyvqb87y1sf5xhdkqsflqn1ziy8-dependencies.builder0.sh' to 'local'...
copying 1 paths...
copying path '/tmp/jade/nix-test/ca/eval-store/store/7r5pqyncvfgrryf9gzy1z56z3xigi61x-builder-dependencies-input-0.sh' to 'local'...
copying 1 paths...
copying path '/tmp/jade/nix-test/ca/eval-store/store/nhmgm87zlqy3ks96dxrn7l37b72azi99-builder-dependencies-input-1.sh' to 'local'...
copying 1 paths...
copying path '/tmp/jade/nix-test/ca/eval-store/store/nq4qa2j6y8ajqazlfq6h46ck637my1n6-builder-dependencies-input-2.sh' to 'local'...
copying 1 paths...
copying path '/tmp/jade/nix-test/ca/eval-store/store/6vh0vna9l5afck01y7iaks3hm9ikwqyj-builder-fod-input.sh' to 'local'...
building '/tmp/jade/nix-test/ca/eval-store/store/gy91pqymf2nc5v7ld1bad94xpwxdi25s-dependencies-input-0.drv'...
building '/tmp/jade/nix-test/ca/eval-store/store/w7wlkjx97ivmnrymkac5av3nyp94hzvq-dependencies-input-1.drv'...
../src/libstore/build/derivation-goal.cc:1556:22: runtime error: reference binding to null pointer of type 'Derivation'
0 0x734ba59a6886 in nix::DerivationGoal::waiteeDone(std::shared_ptr<nix::Goal>, nix::Goal::ExitCode) /home/jade/lix/lix2/build/src/libstore/build/derivation-goal.cc:1556:12
1 0x734ba59c0962 in nix::Goal::amDone(nix::Goal::ExitCode, std::optional<nix::Error>) /home/jade/lix/lix2/build/src/libstore/build/goal.cc:95:25
2 0x734ba5a1c44a in nix::PathSubstitutionGoal::done(nix::Goal::ExitCode, nix::BuildResult::Status, std::optional<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>>) /home/jade/lix/lix2/build/src/libstore/build/substitution-goal.cc:38:5
3 0x734ba5a1b454 in nix::PathSubstitutionGoal::init() /home/jade/lix/lix2/build/src/libstore/build/substitution-goal.cc:56:9
4 0x734ba5a2a6c6 in nix::Worker::run(std::set<std::shared_ptr<nix::Goal>, nix::CompareGoalPtrs, std::allocator<std::shared_ptr<nix::Goal>>> const&) /home/jade/lix/lix2/build/src/libstore/build/worker.cc:320:23
5 0x734ba59b93d8 in nix::Store::buildPathsWithResults(std::vector<nix::DerivedPath, std::allocator<nix::DerivedPath>> const&, nix::BuildMode, std::shared_ptr<nix::Store>) /home/jade/lix/lix2/build/src/libstore/build/entry-points.cc:60:12
6 0x734ba663c107 in nix::Installable::build2(nix::ref<nix::Store>, nix::ref<nix::Store>, nix::Realise, std::vector<nix::ref<nix::Installable>, std::allocator<nix::ref<nix::Installable>>> const&, nix::BuildMode) /home/jade/lix/lix2/build/src/libcmd/installables.cc:637:36
Change-Id: Id0e651e480bebf6356733b01bc639e9bb59c7bd0
This was generating an out-of-range verbosity value. We should just
process it as an int and then convert to verbosity with a clamping
function, which trivially avoids any domain type violations.
Change-Id: I0ed20da8e1496a1225ff3008b76827d99265d404
We got UBSan working on Lix, so we of course immediately found a bug and
some definitely nonsense behaviour.
Accessing `pureEval` or `restrictEval` from a default setting value is
nonsense, since they would never be actually set by the time that value
is set so they are not going to do anything. The configuration is not
applied in an initializer (and even if it were, it's not going to be in
the right order).
After looking into *that*, we hunted down what actually was applying
these, since clearly this code did not do anything. The EvalState
constructor should have a "search path added and removed here :)" sign
on it, because that's where it is done. We added an explicit
initialization of the optional in there because it was otherwise unclear
why pureEval also has the search path to allowed paths setup code run.
We then realized that the `pureEval` documentation was *also* bogus, and
we rewrote it. In so doing, we realized that we forgot to file a bug to
make `builtins.storePath` work in pure eval mode, so we filed one of
those: lix-project/lix#402
Yaks have been thoroughly shorn.
UBSan report:
../src/libexpr/eval-settings.cc:66:10: runtime error: member call on address 0x752fa9a13060 which does not point to an object of type 'nix::BaseSetting<b
ool>'
0x752fa9a13060: note: object has invalid vptr
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
^~~~~~~~~~~~~~~~~~~~~~~
invalid vptr
0 0x752fa95106a6 in nix::EvalSettings::getDefaultNixPath[abi:cxx11]() /home/jade/lix/lix2/build/src/libexpr/eval-settings.cc:66:10
1 0x752fa950e420 in nix::EvalSettings::EvalSettings() /home/jade/lix/lix2/build/src/libexpr/eval-settings.hh:36:15
2 0x752fa9469f1f in __cxx_global_var_init.50 /home/jade/lix/lix2/build/src/libexpr/eval-settings.cc:98:14
3 0x752fa9469f1f in _GLOBAL__sub_I_eval_settings.cc /home/jade/lix/lix2/build/src/libexpr/eval-settings.cc
4 0x752fabbd308d in call_init (/nix/store/k7zgvzp2r31zkg9xqgjim7mbknryv6bs-glibc-2.39-52/lib/ld-linux-x86-64.so.2+0x508d) (BuildId: a5b8228edc9f16078ac3c894af964eeb990ecb4c)
5 0x752fabbd317b in _dl_init (/nix/store/k7zgvzp2r31zkg9xqgjim7mbknryv6bs-glibc-2.39-52/lib/ld-linux-x86-64.so.2+0x517b) (BuildId: a5b8228edc9f16078ac3c894af964eeb990ecb4c)
6 0x752fabbe9c2f in _dl_start_user (/nix/store/k7zgvzp2r31zkg9xqgjim7mbknryv6bs-glibc-2.39-52/lib/ld-linux-x86-64.so.2+0x1bc2f) (BuildId: a5b8228edc9f16078ac3c894af964eeb990ecb4c)
Change-Id: I5d8ffb7bfbe24b6584020ac74eed93d9f2e6d111
even the transfer function is not all that necessary since there aren't
that many users, but we'll keep it for now. we could've kept both names
but we also kind of want to use `download` for something else very soon
Change-Id: I005e403ee59de433e139e37aa2045c26a523ccbf
The lock usage was obviously wrong so it was entirely serialized. This
has the predicted speedups, the only question is whether it is sound
because it's exposing a bunch of new code to actual concurrency.
I did audit all the stores' queryPathInfoUncached implementations and
they all look *intended* to be thread safe, but whether that is actually
sound or not: lol lmao. I am highly confident in the s3 one because it
is calling s3 sdk methods that are thread safe and has no actual state.
Others are using Pool and look to be *supposed* to be thread safe, but
unsure if they actually are.
Change-Id: I0369152a510e878b5ac56c9ac956a98d48cd5fef
Found by looking for interesting asan reports from the test suite.
What happened here is that name got overwritten, but it was what
actually held the backing memory for the thing it got overwritten by,
which was a by-reference value coming out of std::regex.
Due to absurd reasons I cannot seem to use a string_view iterator here,
so I just copy the string with a longer lifetime instead. idk lol
==3796364==ERROR: AddressSanitizer: heap-use-after-free on address 0x503000014c61 at pc 0x74843523bf1d bp 0x7ffc68351330 sp 0x7ffc68350af0
READ of size 3 at 0x503000014c61 thread T0
0 0x74843523bf1c in __asan_memcpy (/nix/store/mzhqknx2mc94jdz4n320hn1lml86398y-clang-wrapper-17.0.6/resource-root/lib/linux/libclang_rt.asan-x86_64.so+0x159f1c)
1 0x6403cf6cbff4 in std::char_traits<char>::copy(char*, char const*, unsigned long) /nix/store/14c6s4xzhy14i2b05s00rjns2j93gzz4-gcc-13.2.0/include/c++/13.2.0/bits/char_traits.h:445:33
<...>
7 0x6403cf6cbff4 in std::__cxx11::sub_match<__gnu_cxx::__normal_iterator<char const*, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>>>::str() const /nix/store/14c6s4xzhy14i2b05s00rjns2j93gzz4-gcc-13.2.0/include/c++/13.2.0/bits/regex.h:966:6
8 0x6403cf6cbff4 in std::__cxx11::sub_match<__gnu_cxx::__normal_iterator<char const*, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>>>::operator std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>() const /nix/store/14c6s4xzhy14i2b05s00rjns2j93gzz4-gcc-13.2.0/include/c++/13.2.0/bits/regex.h:955:16
9 0x6403cf6cbff4 in nix::getClosureInfo[abi:cxx11](nix::ref<nix::Store>, nix::StorePath const&) /home/jade/lix/lix2/build/src/nix/diff-closures.cc:37:26
10 0x6403cf6cd70c in nix::printClosureDiff(nix::ref<nix::Store>, nix::StorePath const&, nix::StorePath const&, std::basic_string_view<char, std::char_traits<char>>) /home/jade/lix/lix2/build/src/nix/diff-closures.cc:54:25
11 0x6403cf873331 in CmdProfileDiffClosures::run(nix::ref<nix::Store>) /home/jade/lix/lix2/build/src/nix/profile.cc:479:17
<...>
0x503000014c61 is located 17 bytes inside of 21-byte region [0x503000014c50,0x503000014c65)
freed by thread T0 here:
0 0x748435250470 in operator delete(void*) (/nix/store/mzhqknx2mc94jdz4n320hn1lml86398y-clang-wrapper-17.0.6/resource-root/lib/linux/libclang_rt.asan-x86_64.so+0x16e470)
<...>
6 0x6403cf6cbda2 in std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>::~basic_string() /nix/store/14c6s4xzhy14i2b05s00rjns2j93gzz4-gcc-13.2.0/include/c++/13.2.0/bits/basic_string.h:792:9
7 0x6403cf6cbda2 in nix::getClosureInfo[abi:cxx11](nix::ref<nix::Store>, nix::StorePath const&) /home/jade/lix/lix2/build/src/nix/diff-closures.cc:36:13
8 0x6403cf6cd70c in nix::printClosureDiff(nix::ref<nix::Store>, nix::StorePath const&, nix::StorePath const&, std::basic_string_view<char, std::char_traits<char>>) /home/jade/lix/lix2/build/src/nix/diff-closures.cc:54:25
<...>
previously allocated by thread T0 here:
0 0x74843524fa38 in operator new(unsigned long) (/nix/store/mzhqknx2mc94jdz4n320hn1lml86398y-clang-wrapper-17.0.6/resource-root/lib/linux/libclang_rt.asan-x86_64.so+0x16da38)
<...>
9 0x6403cf6cb68c in std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>::basic_string<std::basic_string_view<char, std::char_traits<char>>, void>(std::basic_string_view<char, std::char_traits<char>> const&, std::allocator<char> const&) /nix/store/14c6s4xzhy14i2b05s00rjns2j93gzz4-gcc-13.2.0/include/c++/13.2.0/bits/basic_string.h:784:4
10 0x6403cf6cb68c in nix::getClosureInfo[abi:cxx11](nix::ref<nix::Store>, nix::StorePath const&) /home/jade/lix/lix2/build/src/nix/diff-closures.cc:33:21
11 0x6403cf6cd70c in nix::printClosureDiff(nix::ref<nix::Store>, nix::StorePath const&, nix::StorePath const&, std::basic_string_view<char, std::char_traits<char>>) /home/jade/lix/lix2/build/src/nix/diff-closures.cc:54:25
12 0x6403cf873331 in CmdProfileDiffClosures::run(nix::ref<nix::Store>) /home/jade/lix/lix2/build/src/nix/profile.cc:479:17
<...>
Change-Id: I9c408cf2a3d3155f9f7b2ad4848ee6c741331db0
There was a previously-unused move constructor that just called abort,
which makes no sense since it ought to just be `= delete` if you don't
want one (commit history says it was Eelco doing an optimistic
performance optimisation in 2016, so it probably would not pass review
today).
However, a Lock has some great reasons to be moved! You might need to
unlock it early, for instance, or give it to someone else. So we change
the move constructor to instead hollow out the moved-from object and
make it unusable.
Change-Id: Iff2a4c2f7ebd0a558c4866d4dfe526bc8558bed7
Unfetched submodules are included as empty directories in archives, so they end
up as such in the store when fetched in clean mode. Make sure the same happens
in dirty mode too. Fortunately, they are already correctly represented in the
ls-files output, so we just need to make sure to include the empty directory in
our filter.
Fixes: https://github.com/NixOS/nix/issues/6247
Change-Id: I60d06ff360cfa305d081b920838c893c06da801c
* changes:
libstore client: remove remaining dead code
libstore: refuse to serialise ancient protocols
libstore client: remove support for <2.3 clients
libstore daemon: remove very old protocol support (<2.3)
Delete old ValidPathInfo test, fix UnkeyedValidPathInfo
Set up minimum protocol version
with the prepatory work done this mostly means turning plain pointers
into unique_ptrs, with all the associated churn that necessitates. we
might want to change some of these to box_ptrs at some point as well,
but that would be a semantic change that isn't fully appropriate yet.
Change-Id: I0c238c118617420650432f4ed45569baa3e3f413
almost all places where Exprs are passed as pointers expect the pointers
to be non-null. pass them as references to encode this constraint in the
type system as well (and also communicate that Exprs must not be freed).
Change-Id: Ia98f166fec3c23151f906e13acb4a0954a5980a2
now that destructors are hooked up we want to give the C skeleton every
real chance to actually run them. since bison does not call destructors
on values that have been passed to semantic actions even when an action
causes an abort we will also have to delete some things manually still.
Change-Id: Ia22bdaa9e969b74e17a6c496e35e6c2d86b7d750
this doesn't help much yet since the state objects themselves also leak
all memory they are given, but it is a first necessary step to properly
managing parser memory. notably we have to clear $$ when returning from
the parser since even the start symbol is subject to automatic deletion
by the bison-generated parser before returning control to the call site
Change-Id: I80245b0c747308e80923e7f18ce4e1a4898f93b0
This uses a minor hack in which we check the rl_line_buffer global
variable to workaround editline not including the colon in its
completion callback.
Fixes#361
Change-Id: Id159d209c537443ef5e37a975982e8e12ce1f486
* changes:
Change error messages about 'invalid paths' to 'path does not exist'.
Add a clearer error message for InvalidPathError during evaluation
Harmonise the Store::queryPathInfoUncached interface
This:
- Consistently returns `nullptr` for a non-existent
store path, instead of a mix of `nullptr` and
throwing exceptions.
- If a store returns "bad" store paths in response
to a request (e.g. incorrect hash or name), don't
cache this result. This removes some duplication
of code at the cache-access layer of queryPathInfo()
checking this, and allows us to provide more
specific errors.
Part of #270.
Change-Id: I86612c6499b1a37ab872c712c2304d6a3ff19edb
FreeBSD uses libunwind unwind.h, which does not require
`_GNU_SOURCE` to expose `_Unwind_Backtrace`.
Tell Boost that.
Change-Id: I81e767967b1458118b86d212b5552d4d0a1200d9
It's in the security section, and it was totally outdated anyway.
I took the opportunity to write down the stuff we already believed.
Change-Id: I73e62ae85a82dad13ef846e31f377c3efce13cb0
They are enabled by default, and Meson will also prints whether or not
they're enabled at the bottom at the end of configuration.
Change-Id: I48db238510bf9e74340b86f243f4bbe360794281
Fixes a compiler error that looks like:
error: could not convert '[...]' from 'future<void>' to 'future<nix::FileTransferResult>'
Change-Id: I4aeadfeba0dadfdf133f25e6abce90ede7a86ca6
This reverts commit d0390b5cf2.
Other parts of the codebase will need to be adjusted in response to a
default verbosity change. Let's just push this to after 2.90.
Fixes#362.
Fixes#367.
Change-Id: I04648473579146851bda41d764adc1ef954c355d
Here's my guide so far:
$ rg '((?!(recursive).*) Nix
(?!(daemon|store|expression|Rocks!|Packages|language|derivation|archive|account|user|sandbox|flake).*))'
-g '!doc/' --pcre2
All items from this query have been tackled. For the documentation side:
that's for lix-project/lix#162.
Additionally, all remaining references to github.com/NixOS/nix which
were not relevant were also replaced.
Fixes: lix-project/lix#148.
Fixes: lix-project/lix#162.
Change-Id: Ib3451fae5cb8ab8cd9ac9e4e4551284ee6794545
Signed-off-by: Raito Bezarius <raito@lix.systems>
This causes libstore, libexpr, libfetchers, and libutil to be linked
with -Wl,--whole-archive to executables, when building statically.
libstore for the store backends, libexpr for the primops, libfetchers
for the fetcher backends I assume(?), and libutil for the nix::logger
initializer (which notably shows in pre-main constructors when HOME is
not owned by the user. cursed.).
This workaround should be removed when #359 is fixed.
Fixes#306.
Change-Id: Ie9ef0154e09a6ed97920ee8ab23810ca5e2de84c
Fixes: lix-project/lix#157
Fixes: lix-project/lix#221
Previously the entire escaped store URI was included. This would cause
build failures if a very long or deeply nested path was being used in
the store.
Now, we use the first 48 characters of the URL (escaped), then 16 bytes
of hash of the entire URL. This should never collide and limits the
length of the file name to a bit over 64, which is fine.
Change-Id: Ic1ba690a94e83749567c2c29460b8d1bcf2ac413
This is because a dynamic_cast<nix::RootArgs *> of a (n-e-j) MyArgs
returns nullptr even though MyArgs has virtual nix::RootArgs as a
parent.
class MyArgs : virtual public nix::MixEvalArgs,
virtual public nix::MixCommonArgs,
virtual nix::RootArgs { ... };
So this should work right?? But it does not. We found out that it's
caused by -fvisibility=hidden in n-e-j, but honestly this code was bad
anyway.
The trivial solution is to simply stop relying on RTTI working properly
here, which is probably better OO architecture anyway. However, I am not
100% confident *this* is sound, since we have this horrible hierarchy:
Args (defines getRoot)
/ | \
RootArgs MixCommonArgs MixEvalArgs
(overrides)
I am not confident that this is guaranteed to resolve from Args always
in the case of this override.
Assertion failed: (res), function getRoot, file src/libutil/args.cc, line 67.
6MyArgsProcess 60503 stopped
* thread #1, queue = 'com.apple.main-thread', stop reason = hit program assert
frame #4: 0x0000000100b1a41c liblixutil.dylib`nix::Args::processArgs(std::__1::list<std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char>>, std::__1::allocator<std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char>>>> const&, bool) [inlined] nix::Args::getRoot(this=0x00000001000d0688) at args.cc:67:5 [opt]
64 std::cout << typeid(*p).name();
65
66 auto * res = dynamic_cast<RootArgs *>(p);
-> 67 assert(res);
68 return *res;
69 }
70
Target 0: (nix-eval-jobs) stopped.
(lldb) p this
(MyArgs *) 0x00000001000d0688
(lldb) p *this
(nix::Args) {
longFlags = size=180 { ... }
shortFlags = size=4 { ... }
expectedArgs = size=1 { ... }
processedArgs = size=0 {}
hiddenCategories = size=1 {
[0] = "Options to override configuration settings"
}
parent = nullptr
}
We also found that if we did this:
class [[gnu::visibility("default")]] RootArgs : virtual public Args
it would work properly (???!). This is of course, very strange, because
objdump -Ct output on liblixexpr.dylib is identical both with and
without it.
Possibly related: https://www.qt.io/blog/quality-assurance/one-way-dynamic_cast-across-library-boundaries-can-fail-and-how-to-fix-it
Fixes: lix-project/nix-eval-jobs#2
Change-Id: I6b9ed968ed56420a9c4d2dffd18999d78c2761bd
It seems like someone implemented precompiled headers a long time ago
and then it never got ported to meson or maybe didn't work at all.
This is, however, blessedly easy to simply implement. I went looking for
`#define` that could affect the result of precompiling the headers, and
as far as I can tell we aren't doing any of that, so this should truly
just be free build time savings.
Previous state:
Compilation (551 times):
Parsing (frontend): 1302.1 s
Codegen & opts (backend): 956.3 s
New state:
**** Time summary:
Compilation (567 times):
Parsing (frontend): 1123.0 s
Codegen & opts (backend): 1078.1 s
I wonder if the "regression" in codegen time is just doing the PCH
operation a few times, because meson does it per-target.
Change-Id: I664366b8069bab4851308b3a7571bea97ac64022
Before:
$ nix flake lock --override-input nixpkgs gitlab:simple-nixos-mailserver/nixos-mailserver/nonexistent
fetching git input 'git+file:///home/linus/projects/lix'
fetching gitlab input 'gitlab:simple-nixos-mailserver/nixos-mailserver/nonexistent'
error: [json.exception.type_error.302] type must be string, but is null
After:
$ outputs/out/bin/nix flake lock --override-input nixpkgs gitlab:simple-nixos-mailserver/nixos-mailserver/nonexistent
fetching git input 'git+file:///home/linus/projects/lix'
fetching gitlab input 'gitlab:simple-nixos-mailserver/nixos-mailserver/nonexistent'
error:
… while updating the lock file of flake 'git+file:///home/linus/projects/lix?ref=refs/heads/fix-gitlab-nonexistent&rev=915f16a619a36237a099b9aa9afed6d14ff613b4'
… while updating the flake input 'nixpkgs'
… while fetching the input 'gitlab:simple-nixos-mailserver/nixos-mailserver/nonexistent'
error: No commits returned by GitLab API -- does the ref really exist?
Change-Id: Id9bc79d98348500e152ed519bb3ac79a3d15c38d
We reviewed this code a while ago, and we neglected to get a comment in
saying why it's Like This at the time. Let's fix that, since it is code
that looks very absurd at first glance.
Change-Id: Ib67b49605ef9ef1c84ecda1db16be74fc9105398
* changes:
util.hh: Delete remaining file and clean up headers
util.hh: Move nativeSystem to local-derivation-goal.cc
util.hh: Move stuff to types.hh
util.cc: Delete remaining file
util.{hh,cc}: Move ignoreException to error.{hh,cc}
util.{hh,cc}: Split out namespaces.{hh,cc}
util.{hh,cc}: Split out users.{hh,cc}
util.{hh,cc}: Split out strings.{hh,cc}
util.{hh,cc}: Split out unix-domain-socket.{hh,cc}
util.{hh,cc}: Split out child.{hh,cc}
util.{hh,cc}: Split out current-process.{hh,cc}
util.{hh,cc}: Split out processes.{hh,cc}
util.{hh,cc}: Split out file-descriptor.{hh,cc}
util.{hh,cc}: Split out file-system.{hh,cc}
util.{hh,cc}: Split out terminal.{hh,cc}
util.{hh,cc}: Split out environment-variables.{hh,cc}
while refactoring the curl wrapper we inadvertently broken the immutable
flake protocol, because the immutable flake protocol accumulates headers
across the entire redirect chain instead of using only the headers given
in the final response of the chain. this is a problem because Some Known
Providers Of Flake Infrastructure set rel=immutable link headers only in
the penultimate entry of the redirect chain, and curl does not regard it
as worth returning to us via its response header enumeration mechanisms.
fixes lix-project/lix#358
Change-Id: I645c3932b465cde848bd6a3565925a1e3cbcdda0
check goals for timeouts first, and their activity fds only if no
timeout has occurred. checking for timeouts *after* activity sets
us up for assertion failures by running multiple build completion
notifiers, the first of which will kill/reap the the goal process
and consuming the Pid instance. when the second notifier attempts
to do the same it will core dump with an assertion failure in Pid
and take down not only the single goal, but the entire daemon and
all goals it was building. luckily this is rare in practice since
it requires a build to both finish and time out at the same time.
writing a test for this is not feasible due to how much it relies
on scheduling to actually trigger the underlying bug, but on idle
machines it can usually be triggered by running multiple sleeping
builds with timeout set to the sleep duration and `--keep-going`:
nix-build --timeout 10 --builders '' --keep-going -E '
with import <nixpkgs> {};
builtins.genList
(i: runCommand "foo-${toString i}" {} "sleep 10")
100
'
Change-Id: I394d36b2e5ffb909cf8a19977d569bbdb71cb67b
8c06b7b43¹ made libfetchers log the URL being fetched just before the
actual fetch, particularly in case something freezes. This used the base
URL, to not include query parameters, as the Nixpkgs lib tests assume
that stderr logs will be equal across shallow and non-shallow git
fetches (and shallow fetches have the ?shallow=1 query parameter).
8c06b7b43 assumed that the `base` field of ParsedURL would be populated,
as the comment simply says "URL without query/fragment"... but
apparently it is not populated when the URL being fetched is *already*
fetched, which caused libfetchers to log things like
fetching gitlab input ''
which is. silly. but you know, busted lix be busted.
Anyway, with this commit we just remove the query params before printing
instead, which seems to do the right thing
[1]: 8c06b7b431
Change-Id: I9b9988992029aa6abef786f20b66e68c2ebb97d4
The `builder` local variable and duplicate `args.push_back` are no
longer required since the Darwin sandbox stopped using `sandbox-exec`.
The `drv->isBuiltin` check is not required either, as args are not
accessed when the builder is builtin.
Change-Id: I80b939bbd6f727b01793809921810ff09b579d54
Seccomp filtering and the no-new-privileges functionality improve the security
of the sandbox, and have been enabled by default for a long time. In
lix-project/lix#265 it was decided that they
should be enabled unconditionally. Accordingly, remove the allow-new-privileges
(which had weird behavior anyway) and filter-syscall settings, and force the
security features on. Syscall filtering can still be enabled at build time to
support building on architectures libseccomp doesn't support.
Change-Id: Iedbfa18d720ae557dee07a24f69b2520f30119cb
* changes:
docs: linkify nix3-build mention in nix-build.md
build: make internal-api-docs PHONY
cleanup lookupFileArg
add docstring to lookupFileArg
add libcmd test for lookupFileArg
This breaks downstreams linking to us on purpose to make sure that if
someone is linking to Lix they're doing it on purpose and crucially not
mixing up Nix and Lix versions in compatibility code.
We still need to fix the internal includes to follow the same schema so
we can drop the single-level include system entirely. However, this
requires a little more effort.
This adds pkg-config for libfetchers and config.h.
Migration path:
expr.hh -> lix/libexpr/expr.hh
nix/config.h -> lix/config.h
To apply this migration automatically, remove all `<nix/>` from
includes, so: `#include <nix/expr.hh>` -> `#include <expr.hh>`. Then,
the correct paths will be resolved from the tangled mess, and the
clang-tidy automated fix will work.
Then run the following for out of tree projects:
```
lix_root=$HOME/lix
(cd $lix_root/clang-tidy && nix develop -c 'meson setup build && ninja -C build')
run-clang-tidy -checks='-*,lix-fixincludes' -load=$lix_root/clang-tidy/build/liblix-clang-tidy.so -p build/ -fix src
```
Related: lix-project/nix-eval-jobs#5
Fixes: lix-project/lix#279
Change-Id: I7498e903afa6850a731ef8ce77a70da6b2b46966
File not found while importing causes a SysError, not an EvalError,
which is not currently caught by the tab-completion handler. Ignoring
all SysErrors might seem "dangerous" but this is the tab-completion
handler, any exception being bubbled up from there causes unexpected
behavior (causes the whole repl to exit).
Fixes#340.
Change-Id: I643048a47935e77f582decc539d9e51bdb96c890
nixpkgs has 23000 attributes, and our previous limit would be hit if you
have more than one nixpkgs in the environment, for example, because
`repl-overlays` will load the new stuff from the environment on top of
the existing environment.
This is not really testable since if we did write such a test, it would
just be testing this constant tbh...
Fixes: lix-project/lix#337
Change-Id: I49197bfb4db55b082f914f0d70e84f5f5f110954
Also fix typos introduced by the commits I read.
I have run the addDrvOutputDependencies release note past Ericson since
I was confused by what the heck it was doing, and he was saying it was
reasonable.
Change-Id: Id015353b00938682f7faae7de43df7f991a5237e
nix::fetchers::CacheImpl uses $XDG_CACHE_HOME, or its default based on
$HOME, to store its SQLite database. If the current process can't write
to that directory for whatever reason, though, any eval-time fetching
would fail just initializing the cache.
With this change, IO errors initializing the fetcher cache are logged
but ignored, and nix::fetchers::CacheImpl falls back to an in-memory¹
database instead.
Notably, this will fix any uses eval fetching while Lix itself is being
run in a derivation builder (such as during tests), as the derivation
builder does not set $XDG_CACHE_HOME, and sets $HOME to the non-existent
directory /homeless-shelter.
Before:
$ env -u XDG_CACHE_HOME HOME=/homeless-shelter nix -Lv eval --impure -E 'fetchTarball "https://git.lix.systems/lix-project/lix/archive/main.tar.gz"'
error:
… while calling the 'fetchTarball' builtin
at «string»:1:1:
1| fetchTarball "https://git.lix.systems/lix-project/lix/archive/main.tar.gz"
| ^
error: creating directory '/homeless-shelter': Permission denied
After:
$ env -u XDG_CACHE_HOME HOME=/homeless-shelter nix -Lv eval --impure -E 'fetchTarball "https://git.lix.systems/lix-project/lix/archive/main.tar.gz"'
warning: ignoring error initializing Lix fetcher cache: error: creating directory '/homeless-shelter': Permission denied
"/nix/store/s9lxdnn0awp37n560bg4fgr497ah4hvw-source"
¹: https://www.sqlite.org/inmemorydb.html
Change-Id: I15c38c9baaf215fc6e192b8a4c70b9692a69bc22
This turns errors like:
error: flake output attribute 'hydraJobs' is not a derivation or path
into errors like:
error: expected flake output attribute 'hydraJobs' to be a derivation or
path but found a set: { binaryTarball = «thunk»; build = «thunk»; etc> }
This change affects all InstallableFlake commands.
Change-Id: I899757af418b6f98201006ec6ee13a448c07077c
Passing the commit message as an argument causes update failures on repositories with
lots of flake inputs. In some cases, the commit message is over 250,000 bytes.
Upstream PR: https://github.com/NixOS/nix/pull/10686
(cherry picked from commit 8b5e8f4fba5728f2b3e90fcd1ab15df77e3ea0e8)
Change-Id: I2c196a21cc9bedc24d57a828a0c5b9467e072f76
Move the identical static `chmod_` functions in libstore to
libutil. the function is called `chmodPath` instead of `chmod`
as otherwise it will shadow the standard library chmod in the nix
namespace, which is somewhat confusing.
Change-Id: I7b5ce379c6c602e3d3a1bbc49dbb70b1ae8f7bad
2bbe3efd1¹ added the -Wdeprecated-copy warning, and fixed the instances
of it which GCC warned about, in HintFmt and ref<T>. However, when
building with Clang, there is an additional deprecated-copy warning in
BaseError. This commit explicitly defaults the copy assignment operator
for BaseError and silences this warning.
1: 2bbe3efd16
Change-Id: I50aa4a7ab1a7aae5d7b31f765994abd3db06379d
having the serializer write into `*conn` is not legal because we are
in a sinkToSource that will be drained by the remote we're connected
to. writing into `*conn` directly can break the framing protocol. it
is unlikely this code was ever run: to protocol it caters to is from
2016(!) and thoroughly untested in-tree, and since it's been present
since nix 2.17 and the 1.18 protocol broken here is nix 2.0 we might
safely assume that daemons older than nix 2.1 are no longer used now
see also #325 (though that wants <2.3 gone, this is sadly only <2.1)
Change-Id: I9d674c18f6d802f61c5d85dfd9608587b73e70a5
On several occasions I've found myself confused when trying to delete
a store path, because I am told it's still alive, but
nix-store --query --roots doesn't show anything. Let's save future
users this confusion by mentioning that a path might be alive due to
having referrers, not just roots.
(cherry picked from commit 979a019014569eee7d0071605f6ff500b544f6ac)
Upstream-PR: https://github.com/NixOS/nix/pull/10733
Change-Id: I54ae839a85f3de3393493fba27fd40d7d3af0516
These commands outputs data that may not end with a newline. This
causes problems when the progress bar redraws, as that completely
wipes the last line of output. As nix key generate-secret outputs
a single line of text with no output, it shows up entirely blank,
making it look like nothing happened.
Fixes: lix-project/lix#320
Change-Id: I5ac706d71d839b6dfa760b60a351414cd96297cf
Fixes#183, #110, #116.
The default flake-registry option becomes 'vendored', and refers
to a vendored flake-registry.json file in the install path.
Vendored copy of the flake-registry is from github:NixOS/flake-registry
at commit 9c69f7bd2363e71fe5cd7f608113290c7614dcdd.
Change-Id: I752b81c85ebeaab4e582ac01c239d69d65580f37
Both of these still needs their own actual documentation, but they are
at least now mentioned that they exist and what they're enabled by.
Change-Id: I235b9e8e627e04ed06611423c8e67a8eca233120
Example: /nix/store/dr53sp25hyfsnzjpm8mh3r3y36vrw3ng-neovim-0.9.5^out
This is nonsensical since selecting outputs can only be done for a
buildable derivation, not for a realised store path. The build worker
side of things ends up crashing with an assertion when trying to handle
such malformed paths.
Change-Id: Ia3587c71fe3da5bea45d4e506e1be4dd62291ddf
This builtin was always a problem and nixpkgs uses it in exactly one
place, to give up if the Nix version is absurdly old. It has no other
use cases, and doesn't work in a multi-implementation world anyway.
Change-Id: I03c36e118591029e2ef14b091fe14a311c66a08a
Basically I'd expect the same behavior as with `nix-build`, i.e.
with `--keep-going` the hash-mismatch error of each failing
fixed-output derivation is shown.
The approach is derived from `Store::buildPaths` (`entry-point.cc`):
instead of throwing the first build-result, check if there are any build
errors and if so, display all of them and throw after that.
Unfortunately, the BuildResult struct doesn't have an `ErrorInfo`
(there's a FIXME for that at least), so I have to construct my own here.
This is a rather cheap bugfix and I decided against touching too many
parts of libstore for that (also I don't know if that's in line with the
ongoing refactoring work).
Closes lix-project/lix#302
Change-Id: I378ab984fa271e6808c6897c45e0f070eb4c6fac
Otherwise, it will be thrown again during exit when the repl is terminated by
end-of-input after the last command was interrupted.
Change-Id: I8456c47bc36cfb0892efdad5420f318f7e6526d5
The interrupt-blocking code was originally introduced 20 years ago so that
trying to log an error message does not result in an interrupt exception being
thrown and then going unhandled (c8d3882cdc).
However, the logging code does not check for interrupts any more
(054be50257), so this reasoning is no longer
applicable. Delete this code so that later interrupts are unblocked again, for
example in the next line entered into the repl.
Closes: lix-project/lix#296
Change-Id: I48253f5f4272e75001148c13046e709ef5427fbd
it's no longer used. it really shouldn't have existed this long since it
was just a mashup of both std::promise and std::packaged_task in a shape
that makes composition unnecessarily difficult. all but a single case of
Callback pattern calls were fully synchronous anyway, and even this sole
outlier was by far not important enough to justify the extra complexity.
Change-Id: I208aec4572bf2501cdbd0f331f27d505fca3a62f
also add a few more tests for exception propagation behavior. using
packaged_tasks and futures (which only allow a single call to a few
of their methods) introduces error paths that weren't there before.
Change-Id: I42ca5236f156fefec17df972f6e9be45989cf805
this is the *only* real user of file transfer download completion
callbacks, and a pretty spurious user at that (seeing how nothing
here is even turned on by default and indeed a dependency of path
substitution which *isn't* async, and concurrency-limited). it'll
be a real pain to keep this around, and realistically it would be
a lot better to overhaul substitution in general to be *actually*
async. that requires a proper async framework footing though, and
we don't have anything of the sort, but it's also blocking *that*
Change-Id: I1bf671f217c654a67377087607bf608728cbfc83
The fix for the Darwin vulnerability in ecdbc3b207
also broke setting `__sandboxProfile` when `sandbox=relaxed` or
`sandbox=false`. This cppnix change fixes `sandbox=relaxed` and
adds a suitable test.
Co-Authored-By: Artemis Tosini <lix@artem.ist>
Co-Authored-By: Eelco Dolstra <edolstra@gmail.com>
Change-Id: I40190f44f3e1d61846df1c7b89677c20a1488522
In commit 946fc12e4e, the progress bar in the
repl was disabled again because it was observed to erase incremental output
from attrset evaluations from the terminal. Let's try adding the progress bar
again, this time showing up only when a build is initiated, which does not have
incremental output that could be destroyed to begin with. While this does mean
that we won't have a progress bar for eval-time fetching or IFD, it's still
better than nothing.
Change-Id: If4eb1035cd0c876f5b4ff1e2434b9baf99f150ac
Because of an objc quirk[1], calling curl_global_init for the first time
after fork() will always result in a crash.
Up until now the solution has been to set
OBJC_DISABLE_INITIALIZE_FORK_SAFETY for every nix process to ignore
that error.
This is less than ideal because we were setting it in package.nix,
which meant that running nix tests locally would fail because
that variable was not set.
Instead of working around that error we address it at the core -
by calling curl_global_init inside initLibStore, which should mean
curl will already have been initialized by the time we try to do so in
a forked process.
[1] 01edf1705f/runtime/objc-initialize.mm (L614-L636)
Change-Id: Icf26010a8be655127cc130efb9c77b603a6660d0
only two users of this function exist. only one used it in a way that
even bears resemblance to asynchronicity, and even that one didn't do
it right. fully async and parallel computation would have only worked
if any getEdgesAsync never calls the continuation it receives itself,
only from more derived callbacks running on other threads. calling it
directly would cause the decoupling promise to be awaited immediately
*on the original thread*, completely negating all nice async effects.
Change-Id: I0aa640950cf327533a32dee410105efdabb448df
this seems to be an oversight, considering that regular substitutions
are concurrency-limited. while not particularly necessary at present,
once we've removed the `Callback` based interfaces it will be needed.
Change-Id: Ide2d08169fcc24752cbd07a1d33fb8482f7034f5
When /nix/var (or, more precisely, NIX_STATE_DIR) does not exist at all,
Lix falls back to creating an adhoc chroot store in XDG_DATA_HOME.
b247ef72d[1] changed the way Store classes are initialized, and in the
migration, a `params2` was accidentally changed to `params`. This commit
restores the correct behavior, and in lieu of a single *character* fix,
this commit also changes the variable name to something more reasonable.
Fixes#274.
[1]: b247ef72dc
n.b., this code might deserve some more looking at anyway. this fallback
store creation throws away *all* Store params passed to
openFromNonUri() in favor of an entirely new set which only contains
the `root` param, which may or may not be the correct behavior
Change-Id: Ibea559b88a50e6d6e75a1f87d9d7816cabb2a8f3
returning 0 from the callback for errors signals successful transfer if
the source returned no data even though the exception we've just caught
clearly disagrees. while this is not all that important (since the only
viable cause of such errors will be dataCallback, and the sole instance
of it being used already takes care of exceptions) we can just do this.
Change-Id: I2bb150eff447121d82e8e3aa4e00057c40523ac6
this will be necessary if we want download() to return a source instead
of consuming a sink, which will in turn be needed to remove coroutines.
Change-Id: I34ec241e9bbc5d32fbcd243b244e29c3757533aa
This doesn't comprehensively fix everything outdated in the manual, or
make the manual greatly better, but it does note down where at least
jade noticed it was wrong, and it does fix all the instances of
referencing Nix to conform to the style guide to the best of our
ability.
A lot of things have been commented out for being wrong, and there are
three types of FIXME introduced:
- FIXME(Lix): generically Lix needs to fix it
- FIXME(Qyriad): re lix-project/lix#215
- FIXME(meson): docs got outdated by meson changes and need rewriting
I did fix a bunch of it that I could, but there could certainly be
mistakes and this is definitely just an incremental improvement.
Fixes: lix-project/lix#266
Change-Id: I5993c4603d7f026a887089fce77db08394362135
sizeof(long) is 4 bytes on i686 GCC.
With ~32 GiB of memory and a page size of 4096, there are 7988420 pages.
(7988420 * 4096) is bigger than INT32_MAX folks.
This has gone unnoticed for 9 years, and only came up thanks to
94ea517db[1] adding integer overflow sensitization checks, which caused
this broken code to emit an illegal instruction, crashing Lix the
instant the buildsystem ran Lix to generate the docs files.
[1]: 94ea517dbe729765b69638190f4bea3f6a632b40
Change-Id: I50bb9ea072aac11b449d79e5d55525887a6e5a99
not doing this will cause transfers that had their readers disappear to
linger. with lingering transfers the curl thread can't shut down, which
will cause nix itself to not shut down until the transfer finishes some
other way (most likely network timeouts). also add a new test for this.
Change-Id: Id2401b3ac85731c824db05918d4079125be25b57
If unprivileged userns are *believed* to be disabled (such as with
"kernel.unprivileged_userns_clone = 0"), Lix would previously *give up*
on trying to use a user namespace before actually trying it, even if, in
cases such as unprivileged_userns_clone, it would actually be allowed
since Nix has CAP_SYS_ADMIN when running as daemon.
(see, e.g. 25d4709a4f)
We changed it to actually try it first, and then diagnose possible
causes, and also to be more loud about the whole thing, using warnings
instead of debugs. These warnings will only print on the first build run
by the daemon, which is, tbh, eh, shrug.
This is what led to us realizing that no-userns was a poorly exercised
condition.
Change-Id: I8e4f21afc89c574020dc7e89a560cc740ce6573a
alois31
eldritch horrors
Qyriad
nan-git
jade
Lunaphied
Quantum Jump
Artemis Tosini
Delan Azabani
Robert Hensing
Maximilian Bosch
kloenk
Ilya K
julia
Linus Heckemann
Nikodem Rabuliński
raito
Tom Hubrecht
Pierre Bourdon
puck
Alyssa Ross
Yorick