we don't even need this outside of tests. maybe we should not do
automatic retries at this level at all and use retrying wrappers
instead? at some point we may have to do this, but not just yet.
Change-Id: If0088aa55215be81f1770c25b3bb1b5268c65cf8
never set explicitly, and transfers are never instantiated with one
current activity but submitted with a *different* current activity.
Change-Id: I1a3ec57c02013565aeb9e9398ea42d0c4279095e
it's only used by HttpBinaryCacheStore, and even there used in only on
place. this one place can set the header explicitly, which it now does
Change-Id: Id89228150669e25e7f59a3d6bd939e46059ce29e
it only sets the one field anyway (and the parent activity as a side
effect that does not depend on the exact location of the constructor
call). when FileTransferRequest goes away we would need this anyway.
Change-Id: I35cf2ed3533239181449a62cf34cd282b395e5db
this is fragile, slow as fuck, breaks constantly under high concurrency,
and completely unnecessary since ssh bypasses the stdio file descriptors
*anyway*. we do still check that we see ssh messages to ensure that none
of our subprocess handling messes with ssh's /dev/tty, but that's it now
Change-Id: Ib8e31e1999f813d07a27efc63a9d3454a9e4fcdd
* changes:
treewide: make more settings conditionally available
libstore/build: only send overridden settings to the build hook
treewide: consistently mark overridden settings as such
a first little step into pushing the event loops up, up and away.
eventually we will want them to be instantiated only at the roots
of every thread (since kj binds loops to threads), but not today.
Change-Id: Ic97f1debba382a5a3f46daeaf2d6d434ee42569f
goals should be considered internal to the worker architecture due to
the tight coupling of the two, and we can finally do that. doing this
is also a prerequisite for turning Worker::run() into a real promise.
Change-Id: I7cf273d4a6fdb75b8d192fce1af07c6265ff6980
previously it was possible to fetchurl a dict server, or an ldap server,
or an imap server. this is a bit of a problem, both because rare schemes
may not be available on all systems, and because some schemes (e.g. scp)
are inherently insecure in potentially surprising ways we needn't allow.
Change-Id: I18fc567c6f58c3221b5ea8ce927f4da780057828
we already have a results type for the entire worker call, we may as
well put this bit of info in there. we do keep the assumption of the
old code that the field will only be read if some goals have failed;
fixing that is a very different mess, and not immediately necessary.
Change-Id: If3fc32649dcd88e1987cdd1758c6c5743e3b35ac
without this derivations do not show as completely processed in the
internal-json logs (or the newer multiline output). the former also
breaks external tools like nix-output-monitor which, like multiline
output, grow vertically until at least some goals are finally freed
Change-Id: I55758daf526ba29ae15fb82e0d88da8afb45bf5c
optimise-store.cc used std::regex on darwin, but forgot to include the
header. This probably compiled due to the precompiled headers file, but
it caused errors in the editor.
Change-Id: I23297c08cb66d44e4d4f303560f46e4adc7d5a43
It's not clear to me if `proc_pidinfo()` or `proc_pidfdinfo()` can
actually return negative values, the syscall wrappers convert `-1` into
zero and the semantics suggest that negative values don't make sense,
but just to be safe we'll preserve the int type until we've checked that
it's a positive value.
Fixes: lix-project/lix#548
Change-Id: If575aec6b1e27dba63091c7a0316c7b3788747cd
some promises capture `this`. we could also allocate a shared state,
but this thing doesn't really need to ever be moved anyway. so there.
Change-Id: I50b5c44684a8ab4e984b1323de21f97ace4a864a
not doing this can freeze slots until the goal that occupied them is
freed (rather than simply complete), and then can freeze the system.
fixes#549
Change-Id: I042df04222f8ffbaa18ef4a4eae6cbd6f89b679e
This is done because the one in nixpkgs has several problems and we
don't want to conflict with them fixing those problems:
- not building shared libs
- not building debuginfo (more critical for us due to
lix-project/lix#549)
- not setting the correct cmake build type
- not setting the correct cxxflags to build the coroutine library
- not building with clang (required for the coroutine library since gcc
is known to miscompile coroutines *in kj*).
CC: lix-project/lix#551
Fixes: lix-project/lix#550
Change-Id: Ia5b78dc1809963fdd1a8203b127a216cb575d751
This workaround was for the stdenv not being set when callPackage'ing
package.nix for some of the stranger CI outputs.
Change-Id: I2acdd6efa721b90dd3cb04358544d25d591ff084
The old behavior results in lots of concatenations happening for no good
reason and is an artifact of the technical limitations of the old parser
(combined with some lack of care for such details).
Change-Id: I0d78d6220ca6aeaa10bc437e48e08bf7922e0bb3
This is only a minor semantical distinction, but we should be able to
properly test it, and the parser tests rely on show for that.
Change-Id: I25e868cf9544e30cdff17deb5fd50a434e0f367e
This commit should faithfully reproduce the old behavior down to the
bugs. The new code is a lot more readable, all quirks are well
documented, and it is overall much more maintainable.
Change-Id: I629585918e4f2b7d296b6b8330235cdc90b7bade
Some settings only make sense on particular platforms, or only when a certain
experimental feature is enabled. Several of those were already conditionally
available. Do the same for a bunch more instead of silently ignoring them.
Exceptionally, the use-case-hack setting is not made conditional because it is
included in the test suite.
Change-Id: I29e66ad8ee6178a7c0eff9efb55c3410fae32514
The build hook is still running locally, so it will run with the same default
settings. Hence, just as with the daemon, it is enough to send it only the
overridden settings. This will prevent warnings like
warning: Ignoring setting 'auto-allocate-uids' because experimental feature 'auto-allocate-uids' is not enabled
when the user didn't actually set those settings.
This is inspired by and an alternative to [0].
[0] https://github.com/NixOS/nix/pull/10049
Change-Id: I77ea62cd017614b16b55979dd30e75f09f860d21
Only overridden settings are sent to the daemon, and we're going to do the same
for the build hook to. It needs to be ensured that overridden settings are in
fact consistently marked as such, so that they actually get sent.
Change-Id: I7cd58d925702f86cf2c35ad121eb191ceb62a355
This failed due to https://github.com/NixOS/nixpkgs/pull/346945, which
makes a second lowdown-unsandboxed that works in nix builds, and the
regular lowdown has executables that fail closed when the sandbox setup
fails.
The actual failure here is only visible on nixos-unstable at the moment,
not 24.05, but this commit should fix it up for all versions.
Fixes: lix-project/lix#547
Change-Id: I50c0ecb59518ef01a7c0181114c1b4c5a7c6b78b
A better fix than in 104448e75d, hence a
revert + the fix.
It turns out that this commit has the side-effect that when having e.g.
`StrictHostKeyChecking=accept-new` for a remote builder, the warnings à la
Warning: Permanently added 'builder' (ED25519) to the list of known hosts.
actually end up in the derivation's log whereas hostkey verification
errors don't, but only in the stderr of the `nix-build` invocation
(which was the motivation for the patch).
This change writes the stderr from the build-hook to
* the daemon's stderr, so that the SSH errors appear in the journal
(which was the case before 104448e75d)
* the client's stderr, as a log message
* NOT to the drv log (this is handled via `handleJSONLogMessage`)
I tried to fix the issue for legacy-ssh as well, but failed and
ultimately decided to not bother.
I know that we'll sooner or later replace the entire component, however
this is the part of the patch I have working for a while, so I figured I
might still submit it for the time being.
Change-Id: I21ca1aa0d8ae281d2eacddf26e0aa825272707e5
When the git default branch is not set to master the installcheck
test suite fails. This patch adjusts the test setup scripts to
ignore the system and user git config files.
GIT_CONFIG_SYSTEM is set to /dev/null to ignore /etc/gitconfig
GIT_CONFIG_GLOBAL is not set because the global config files
are loaded from $HOME or $XDG_CONFIG_HOME which we already
reset.
git documentation: https://git-scm.com/docs/git#Documentation/git.txt-codeGITCONFIGGLOBALcode
Change-Id: Ie73bbed1db9419c9885b9d57e4edb7a4047d5cce
While debugging something else I observed that latest `main` ignores
`Control-C` on `sudo nix-build`.
After reading through the capnproto docs, it seems as if the promise
must be fulfilled to actually terminate the `promise.wait()` below.
This also applies to scenarios such as stopping the client
(`nix-build`), but the builders on the daemon-side are still running,
i.e. closes#540
Co-authored-by: eldritch horrors <pennae@lix.systems>
Change-Id: I9634d14df4909fc1b65d05654aad0309bcca8a0a
eldritch horrors
alois31
Lily Ballard
jade
piegames
V.
Maximilian Bosch