As per our bootstrap governance discussions, here's a very simple
proposal which links as much as possible to our wiki.
Change-Id: I88b1c43f933ff7e529151b1e933fad40283383c4
Signed-off-by: Raito Bezarius <raito@lix.systems>
returning 0 from the callback for errors signals successful transfer if
the source returned no data even though the exception we've just caught
clearly disagrees. while this is not all that important (since the only
viable cause of such errors will be dataCallback, and the sole instance
of it being used already takes care of exceptions) we can just do this.
Change-Id: I2bb150eff447121d82e8e3aa4e00057c40523ac6
this will be necessary if we want download() to return a source instead
of consuming a sink, which will in turn be needed to remove coroutines.
Change-Id: I34ec241e9bbc5d32fbcd243b244e29c3757533aa
This doesn't comprehensively fix everything outdated in the manual, or
make the manual greatly better, but it does note down where at least
jade noticed it was wrong, and it does fix all the instances of
referencing Nix to conform to the style guide to the best of our
ability.
A lot of things have been commented out for being wrong, and there are
three types of FIXME introduced:
- FIXME(Lix): generically Lix needs to fix it
- FIXME(Qyriad): re lix-project/lix#215
- FIXME(meson): docs got outdated by meson changes and need rewriting
I did fix a bunch of it that I could, but there could certainly be
mistakes and this is definitely just an incremental improvement.
Fixes: lix-project/lix#266
Change-Id: I5993c4603d7f026a887089fce77db08394362135
sizeof(long) is 4 bytes on i686 GCC.
With ~32 GiB of memory and a page size of 4096, there are 7988420 pages.
(7988420 * 4096) is bigger than INT32_MAX folks.
This has gone unnoticed for 9 years, and only came up thanks to
94ea517db[1] adding integer overflow sensitization checks, which caused
this broken code to emit an illegal instruction, crashing Lix the
instant the buildsystem ran Lix to generate the docs files.
[1]: 94ea517dbe
Change-Id: I50bb9ea072aac11b449d79e5d55525887a6e5a99
not doing this will cause transfers that had their readers disappear to
linger. with lingering transfers the curl thread can't shut down, which
will cause nix itself to not shut down until the transfer finishes some
other way (most likely network timeouts). also add a new test for this.
Change-Id: Id2401b3ac85731c824db05918d4079125be25b57
mdbook has the unfortunate habit of creating stub files for chapters it
can't find on disk. turn off this helpful feature as it masks errors in
the summary file, and fix a recently introduced instance of this error.
Change-Id: I10d86aac0489c9c494bd5c8a50047415f4d4b18d
If unprivileged userns are *believed* to be disabled (such as with
"kernel.unprivileged_userns_clone = 0"), Lix would previously *give up*
on trying to use a user namespace before actually trying it, even if, in
cases such as unprivileged_userns_clone, it would actually be allowed
since Nix has CAP_SYS_ADMIN when running as daemon.
(see, e.g. 25d4709a4f)
We changed it to actually try it first, and then diagnose possible
causes, and also to be more loud about the whole thing, using warnings
instead of debugs. These warnings will only print on the first build run
by the daemon, which is, tbh, eh, shrug.
This is what led to us realizing that no-userns was a poorly exercised
condition.
Change-Id: I8e4f21afc89c574020dc7e89a560cc740ce6573a
This was found when `logrotate.conf` failed to build in a NixOS system
with:
/nix/store/26zdl4pyw5qazppj8if5lm8bjzxlc07l-coreutils-9.3/bin/id: cannot find name for group ID 30000
This was surprising because it seemed to mean that /etc/group was busted
in the sandbox. Indeed it was:
root❌0:
nixbld:!💯
nogroup❌65534:
We diagnosed this to sandboxUid() being called before
usingUserNamespace() was called, in setting up /etc/group inside the
sandbox. This code desperately needs refactoring.
We also moved the /etc/group code to be with the /etc/passwd code, but
honestly this code is all spaghetti'd all over the place and needs some
more serious tidying than we did here.
We also moved some checks to be earlier to improve locality with where
the things they are checking come from.
Change-Id: Ie29798771f3593c46ec313a32960fa955054aceb
This has the following downsides:
* you cannot build Lix against nixos-unstable.
* this will immediately break as soon as libseccomp will hit
nixos-23.11 (given that people will probably use the package.nix via
our overlay or override nixpkgs via `follows`).
Hence, removing the assert again and add a better FIXME comment.
Change-Id: I284e10cf08e1873fef70ed869a1638aa89792422
This reverts commit a8b3d777fb.
This undoes the revert of PR#6621, which allows nested `follows`, i.e.
{
inputs = {
foo.url = "github:bar/foo";
foo.inputs.bar.inputs.nixpkgs = "nixpkgs";
};
}
does the expected thing now. This is useful to avoid the 1000 instances
of nixpkgs problem without having each flake in the dependency tree to
expose all of its transitive dependencies for modification.
This was in fact part of Nix before and the C++ changes applied w/o
conflicts. However, it got reverted then because people didn't want to
merge lazy-trees against it which was supposed to be merged soon back in
October 2022.
Fixes: lix-project/lix#201
Change-Id: I5ddef914135b695717b2ef88862d57ced5e7aa3c
With Linux kernel >=6.6 & glibc 2.39 a `fchmodat2(2)` is available that
isn't filtered away by the libseccomp sandbox.
Being able to use this to bypass that restriction has surprising results
for some builds such as lxc[1]:
> With kernel ≥6.6 and glibc 2.39, lxc's install phase uses fchmodat2,
> which slips through 9b88e52846/src/libstore/build/local-derivation-goal.cc (L1650-L1663).
> The fixupPhase then uses fchmodat, which fails.
> With older kernel or glibc, setting the suid bit fails in the
> install phase, which is not treated as fatal, and then the
> fixup phase does not try to set it again.
Please note that there are still ways to bypass this sandbox[2] and this is
mostly a fix for the breaking builds.
This change works by creating a syscall filter for the `fchmodat2`
syscall (number 452 on most systems). The problem is that glibc 2.39
is needed to have the correct syscall number available via
`__NR_fchmodat2` / `__SNR_fchmodat2`, but this flake is still on
nixpkgs 23.11. To have this change everywhere and not dependent on the
glibc this package is built against, I added a header
"fchmodat2-compat.hh" that sets the syscall number based on the
architecture. On most platforms its 452 according to glibc with a few
exceptions:
$ rg --pcre2 'define __NR_fchmodat2 (?!452)'
sysdeps/unix/sysv/linux/x86_64/x32/arch-syscall.h
58:#define __NR_fchmodat2 1073742276
sysdeps/unix/sysv/linux/mips/mips64/n32/arch-syscall.h
67:#define __NR_fchmodat2 6452
sysdeps/unix/sysv/linux/mips/mips64/n64/arch-syscall.h
62:#define __NR_fchmodat2 5452
sysdeps/unix/sysv/linux/mips/mips32/arch-syscall.h
70:#define __NR_fchmodat2 4452
sysdeps/unix/sysv/linux/alpha/arch-syscall.h
59:#define __NR_fchmodat2 562
I added a small regression-test to the setuid integration-test that
attempts to set the suid bit on a file using the fchmodat2 syscall.
I confirmed that the test fails without the change in
local-derivation-goal.
Additionally, we require libseccomp 2.5.5 or greater now: as it turns
out, libseccomp maintains an internal syscall table and
validates each rule against it. This means that when using libseccomp
2.5.4 or older, one may pass `452` as syscall number against it, but
since it doesn't exist in the internal structure, `libseccomp` will refuse
to create a filter for that. This happens with nixpkgs-23.11, i.e. on
stable NixOS and when building Lix against the project's flake.
To work around that
* a backport of libseccomp 2.5.5 on upstream nixpkgs has been
scheduled[3].
* the package now uses libseccomp 2.5.5 on its own already. This is to
provide a quick fix since the correct fix for 23.11 is still a staging cycle
away.
We still need the compat header though since `SCMP_SYS(fchmodat2)`
internally transforms this into `__SNR_fchmodat2` which points to
`__NR_fchmodat2` from glibc 2.39, so it wouldn't build on glibc 2.38.
The updated syscall table from libseccomp 2.5.5 is NOT used for that
step, but used later, so we need both, our compat header and their
syscall table 🤷
Relevant PRs in CppNix:
* https://github.com/NixOS/nix/pull/10591
* https://github.com/NixOS/nix/pull/10501
[1] https://github.com/NixOS/nixpkgs/issues/300635#issuecomment-2031073804
[2] https://github.com/NixOS/nixpkgs/issues/300635#issuecomment-2030844251
[3] https://github.com/NixOS/nixpkgs/pull/306070
(cherry picked from commit ba6804518772e6afb403dd55478365d4b863c854)
Change-Id: I6921ab5a363188c6bff617750d00bb517276b7fe
Part of #7672
My main motivation is to be able to use `nix.checkConfig`[1]. This
doesn't work with Lix currently since the module uses `nix show-config`
if the Nix version is <2.20pre and `nix config show` otherwise. I think
this is the only instance where nixpkgs checks for which Nix commands
exist that affects us now, so I figured we could just perform the rename
here as well[2] and still provide the current version number[3].
I don't have a strong opinion on whether to deprecate `nix show-config`,
the warning is added there automatically.
(cherry picked from commit f300e11b056dea414d7d77bbc6e5a7dc5d9ddd41)
[1] https://nixos.org/manual/nixos/stable/options.html#opt-nix.checkConfig
[2] I should add that I don't use the "official" ways of installing Lix
because using the flake directly and callPackaging it seemed to fit
better into my workflow: I already have a little mess to make
sure Hydra from the flake uses the correct pkgs.nix and I didn't
want to complicate it further while keeping a single package-set I
can build in CI. Don't get me wrong, I think such a module for a
quick-start is very important, just giving context on why I bother
in the first place :)
[3] When we go public, I think it's worth considering to add support in
nixpkgs itself for Lix.
Change-Id: I47b4239b05cbeda3c370d2fa56ea768b768768ac
* changes:
docs: clarify how ^ works for -E/-f installables
docs: give translation examples from nix-build -E/-A to installables
docs: clarify how the different kinds of installables are selected
docs: guide to installables docs in installable commands' docs
Currently LocalDerivationGoal allows setting `__sandboxProfile`
to add sandbox parameters on Darwin when `sandbox=true`.
This was only supposed to have an effect when `sandbox=relaxed`
Change-Id: Ide44ee82d7e4d6b545285eab26547e7014817d3f
this is used in CA rewriting, replacement of placeholders in
derivations, generating scripts for devShells, and some more
places. in all of these transitive replacements are unsound,
and overlapping replacements would be as well. there even is
a test that transitive replacements do not happen (in the CA
RewriteSink suite), but none for overlapping replacements. a
minimally surprising binary rewriter surely would not do any
of these replacements, the only reason we have not seen this
break yet is probably that rewriteStrings is only called for
store paths and things that look like store paths (and those
should never overlap nor admit such transitive replacements)
Change-Id: I6fc29f939d5061d9f56c752624a823ece8437c07
* changes:
nix3-profile: remove check "name" attr in manifests
Add profile migration test
nix3-profile: make element names stable
getNameFromURL(): Support uppercase characters in attribute names
nix3-profile: remove indices
nix3-profile: allow using human-readable names to select packages
implement parsing human-readable names from URLs
jade
raito
eldritch horrors
Qyriad
Maximilian Bosch
Artemis Tosini