The growth of the seccomp filter in 127ee1a101
made its compilation time significant (roughly 10 milliseconds have been
measured on one machine). For this reason, it is now precompiled and cached in
the parent process so that this overhead is not hit for every single build. It
is still not optimal when going through the daemon, because compilation still
happens once per client, but it's better than before and doing it only once for
the entire daemon requires excessive crimes with the current architecture.
Fixes: #461
Change-Id: I2277eaaf6bab9bd74bbbfd9861e52392a54b61a3
This is a preparation for precompiling the filter, which is done separately.
The behaviour should be unchanged for now.
Change-Id: I899aa7242962615949208597aca88913feba1cb8
The seccomp setup code was a huge chunk of conditionally compiled
platform-specific code. For this reason, it is appropriate to move it to the
platform-specific implementation file. Ideally its setup could be moved a bit
to make it happen at the same place as the Darwin restrictions, but that change
is going to be less mechanical.
Change-Id: I496aa3c4fabf34656aba1e32b0089044ab5b99f8
When MANPATH is unset or contains an empty component, a reasonable default is
used. Previously (after 3dced96741), when MANPATH
was unset, the shell hook would only place a location containing the Lix manual
pages there, and system-wide manual pages would become unavailable in the
development shell, which is undesired. Fix the issue by including an empty
component in this case.
Change-Id: Ib3c67a831d709fe2a87520e15917eebb59397bd1
this begins a long and arduous journey to remove all result state from
Goal, to eventually drop the std::enable_shared_from_this base, and to
completely eliminate all unsynchronized modification of states of both
Goal and Worker. by the end of this we will hopefully be able to start
and reap multiple derivation builds in parallel, which should speed up
the process quite a bit (at least for short local builds, others might
not notice a large difference. the build hooks will remain a problem.)
Change-Id: I57dcd9b2cab4636ed4aa24cdec67124fef883345
In the SSH code, the logger was conditionally paused, but unconditionally
resumed. This was fine as long as resuming the logger was idempotent. Starting
with 0dd1d8ca1c, it isn't any more, and the
behaviour of the code in question was missed. Consequently, an assertion
failure is triggered for example when performing builds against an "SSH" store
on localhost. Fix the issue by only resuming the logger when it has actually
been paused.
Fixes: #458
Change-Id: Ib1e4d047744a129f15730b7216f9c9368c2f4211
we still mutate goal state to store the results of any given goal run,
but now we also have that information in Worker and could in theory do
something else with it. we could return a map of goal to goal results,
which would also let us better diagnose failures of subgoals (at all).
Change-Id: I1df956bbd9fa8cc9485fb6df32918d68dda3ff48
this is the first step towards removing all result-related mutation of
Goal state from goal implementations themselves, and into Worker state
instead. once that is done we can treat all non-const Goal fields like
private state of the goal itself, and make threading of goals possible
Change-Id: I69ff7d02a6fd91a65887c6640bfc4f5fb785b45c
once goals run on multiple threads these fields must by synchronized as
one, or we try to run build hooks to often (or worse, not often enough)
Change-Id: I47860e46fe5c6db41755b2a3a1d9dbb5701c4ca4
this will usually be used either directly (which is always fine) or in
Finally blocks (where it must never throw execptions). make sure that,
exceptions being handled or not, the calling wait() in Finally doesn't
cause crashes due to the Finally no-nested-exceptions-thrown assertion
Change-Id: Ib83a5d9483b1fe83b9a957dcefeefce5d088f06d
The original attempt at this introduced a regression; this commit
reverts the revert and fixes the regression.
This reverts commit 3e151d4d77.
Fix to the regression:
flakeref: fix handling of `?dir=` param for flakes in subdirs
As reported in #419[1], accessing a flake in a subdir of a Git
repository fails with the previous commit[2] applied with the error
error: unsupported Git input attribute 'dir'
The problem is that the `dir`-param is inserted into the parsed URL if a
flake is fetched from the subdir of a Git repository. However, for the
fetching part this isn't even needed. The fix is to just pass `subdir`
as second argument to `FlakeRef` (which needs a `basedir` that can be
empty) and leave the parsedURL as-is.
Added a regression test to make sure we don't run into this again.
[1] #419
[2] e22172aaf6b6a366cecd3c025590e68fa2b91bcc,
originally 3e151d4d77
Change-Id: I2c72d5a32e406a7ca308e271730bd0af01c5d18b
I have added an option to turn off this build input because I'm much
more comfortable when I don't have that type of thing on my computer.
Its default value is true in order to avoid impacting anyone who depends
on AWS features.
Change-Id: Ic57f3c9b9468f422e9fbdcf3ba0fe96177631067
* changes:
remove unused headers in installable-attr-path
libexpr: include the type of the non-derivation value in the type error
libexpr: mild cleanup to getDerivations
libexpr: DrvInfo: remove unused bad-citizen constructor
cleanup and slightly refactor DrvInfo::queryOutputs
I was reminded by various evil things puck did to the evaluator
involving null bytes that you can get funny bytes by abusing JSON
parsing. It's neater than putting binary in the source file, so let's do
it.
Change-Id: I1ff2e0d829eb303fbed81fa2ebb3a39412e89ff1
* changes:
releng: move officialRelease to version.json
Add -Werror CI job
ci: add a asan+ubsan test run on x86_64-linux
tree-wide: add support for asan!
Shuffled the logic around a bit so the shorter code paths are early
returns, added comments, etc.
Should be NFC.
Change-Id: Ie3ddb3d0eddd614d6f8c37bf9a4d5a50282084ea
DrvInfo's constructor that only takes `EvalState` leaves everything else
empty; a DrvInfo which has no iota of information about the derivation
it represents is not useful, and was not used anywhere.
Change-Id: Ic4d93a08cb2748b8cef9a61e41e70404834b23f9
This was causing a few bits of suffering downstream, in particular, in
the NixOS module, which, after this change, can have the
`officialRelease` stuff in *it* completely deleted since we now have
correct defaulting in package.nix for it.
It also eliminates some automated editing of Nix files, which is
certainly always welcome to eliminate.
Fixes: #406
Change-Id: Id12f3018cff4633e379dbfcbe26b7bc84922bdaf
We should cause CLs that introduce compiler warnings to fail CI. Sadly
this will only cover Clang, but it will cover Clang for free, so it's
truly impossible to say if it's bad or not.
Change-Id: I45ca20d77251af9671d5cbe0d29cb08c5f1d03c2
This should at least catch out blatantly bad patches that don't pass the
test suite with ASan. We don't do this to the integration tests since
they run on relatively limited-memory VMs and so it may not be super
safe to run an evaluator with leak driven garbage collection for them.
Fixes: #403
Fixes: #319
Change-Id: I5267b02626866fd33e8b4d8794344531af679f78
What if you could find memory bugs in Lix without really trying very
hard? I've had variously scuffed patches to do this, but this is
blocked on boost coroutines removal at this point tbh.
Change-Id: Id762af076aa06ad51e77a6c17ed10275929ed578
there are no other uses for this yet, but asking for just a subset of
outputs does seem at least somewhat useful to have as a generic thing
Change-Id: I30ff5055a666c351b1b086b8d05b9d7c9fb1c77a
If `:edit`ing a store path, don't reload repl afterwards
to avoid losing local variables: store is immutable,
so "editing" a store path is always just viewing it.
Resolves: #341
Change-Id: I3747f75ce26e0595e953069c39ddc3ee80699718
limiting CA substitutions was a rather recent addition, and it used a
dedicated counter to not interfere with regular substitutions. though
this works fine it somewhat contradicts the documentation; job limits
should apply to all kinds of substitutions, or be one limit for each.
Change-Id: I1505105b14260ecc1784039b2cc4b7afcf9115c8
all goals do this. it makes no sense to not notify a goal of EOF
conditions because this is the universal signal for "child done"
Change-Id: Ic3980de312547e616739c57c6248a8e81308b5ee
just update progress every time a goal has returned from work(). there
seem to be no performance penalties, and the code is much simpler now.
Change-Id: I288ee568b764ee61f40a498d986afda49987cb50
Unfortunately, io_uring is totally opaque to seccomp, and while currently there
are no dangerous operations implemented, there is no guarantee that it remains
this way. This means that io_uring should be blocked entirely to ensure that
the sandbox is future-proof. This has not been observed to cause issues in
practice.
Change-Id: I45d3895f95abe1bc103a63969f444c334dbbf50d
Previously, system call filtering (to prevent builders from storing files with
setuid/setgid permission bits or extended attributes) was performed using a
blocklist. While this looks simple at first, it actually carries significant
security and maintainability risks: after all, the kernel may add new syscalls
to achieve the same functionality one is trying to block, and it can even be
hard to actually add the syscall to the blocklist when building against a C
library that doesn't know about it yet. For a recent demonstration of this
happening in practice to Nix, see the introduction of fchmodat2 [0] [1].
The allowlist approach does not share the same drawback. While it does require
a rather large list of harmless syscalls to be maintained in the codebase,
failing to update this list (and roll out the update to all users) in time has
rather benign effects; at worst, very recent programs that already rely on new
syscalls will fail with an error the same way they would on a slightly older
kernel that doesn't support them yet. Most importantly, no unintended new ways
of performing dangerous operations will be silently allowed.
Another possible drawback is reduced system call performance due to the larger
filter created by the allowlist requiring more computation [2]. However, this
issue has not convincingly been demonstrated yet in practice, for example in
systemd or various browsers. To the contrary, it has been measured that the the
actual filter constructed here has approximately the same overhead as a very
simple filter blocking only one system call.
This commit tries to keep the behavior as close to unchanged as possible. The
system call list is in line with libseccomp 2.5.5 and glibc 2.39, which are the
latest versions at the point of writing. Since libseccomp 2.5.5 is already a
requirement and the distributions shipping this together with older versions of
glibc are mostly not a thing any more, this should not lead to more build
failures any more.
[0] https://github.com/NixOS/nixpkgs/issues/300635
[1] https://github.com/NixOS/nix/issues/10424
[2] https://github.com/flatpak/flatpak/pull/4462#issuecomment-1061690607
Change-Id: I541be3ea9b249bcceddfed6a5a13ac10b11e16ad
In f047e4357b, I missed the behavior that if
building without a dedicated build user (i.e. in single-user setups), seccomp
setup failures are silently ignored. This was introduced without explanation 7
years ago (ff6becafa8). Hopefully the only
use-case nowadays is causing spurious test suite successes when messing up the
seccomp filter during development. Let's try removing it.
Change-Id: Ibe51416d9c7a6dd635c2282990224861adf1ceab
getSelfExe is used in a few places re-execute nix.
Current code in this file uses ifdefs to support several
platforms, just keep doing that
Change-Id: Iecc2ada0101aea0c30524e3a1218594f919d74bf
alois31
eldritch horrors
Jeremy List
Isabel
Maximilian Bosch
jade
Qyriad
V.
Max “Goldstein” Siling
Artemis Tosini