Previously, the progress bar had two subtly different states in which the bar
would not actually render, both with their own shortcomings: inactive (which
was irreversible) and paused (reversible, but swallowing logs). Furthermore,
there was no way of resetting the statistics, so a very bad solution was
implemented (243c0f18da) that would create a new
logger for each line of the repl, leaking the previous one and discarding the
value of printBuildLogs. Finally, if stderr was not attached to a TTY, the
update thread was started even though the logger was not active, violating the
invariant required by the destructor (which is not observed because the logger
is leaked).
In this commit, the two aforementioned states are unified into a single one,
which can be exited again, correctly upholds the invariant that the update
thread is only running while the progress bar is active, and does not swallow
logs. The latter change in behavior is not expected to be a problems in the
rare cases where the paused state was used before, since other loggers (like
the simple one) don't exhibit it anyway. The startProgressBar/stopProgressBar
API is removed due to being a footgun, and a new method for properly resetting
the progress is added.
Co-Authored-By: Qyriad <qyriad@qyriad.me>
Change-Id: I2b7c3eb17d439cd0c16f7b896cfb61239ac7ff3a
Previously, system call filtering (to prevent builders from storing files with
setuid/setgid permission bits or extended attributes) was performed using a
blocklist. While this looks simple at first, it actually carries significant
security and maintainability risks: after all, the kernel may add new syscalls
to achieve the same functionality one is trying to block, and it can even be
hard to actually add the syscall to the blocklist when building against a C
library that doesn't know about it yet. For a recent demonstration of this
happening in practice to Nix, see the introduction of fchmodat2 [0] [1].
The allowlist approach does not share the same drawback. While it does require
a rather large list of harmless syscalls to be maintained in the codebase,
failing to update this list (and roll out the update to all users) in time has
rather benign effects; at worst, very recent programs that already rely on new
syscalls will fail with an error the same way they would on a slightly older
kernel that doesn't support them yet. Most importantly, no unintended new ways
of performing dangerous operations will be silently allowed.
Another possible drawback is reduced system call performance due to the larger
filter created by the allowlist requiring more computation [2]. However, this
issue has not convincingly been demonstrated yet in practice, for example in
systemd or various browsers.
This commit tries to keep the behavior as close to unchanged as possible. Only
newer syscalls that are not supported by glibc 2.38 (as found in NixOS 23.11)
are blocked. Since this includes fchmodat2, the compatibility code added for
handling this syscall can be removed too.
[0] https://github.com/NixOS/nixpkgs/issues/300635
[1] https://github.com/NixOS/nix/issues/10424
[2] https://github.com/flatpak/flatpak/pull/4462#issuecomment-1061690607
Change-Id: I541be3ea9b249bcceddfed6a5a13ac10b11e16ad
this gives about 20% performance improvements on pure parsing. obviously
it will be less on full eval, but depending on how much parsing is to be
done (e.g. including hackage-packages.nix or not) it's more like 4%-10%.
this has been tested (with thousands of core hours of fuzzing) to ensure
that the ASTs produced by the new parser are exactly the same as the old
one would have produced. error messages will change (sometimes by a lot)
and are not yet perfect, but we would rather leave this as is for later.
test results for running only the parser (excluding the variable binding
code) in a tight loop with inputs and parameters as given are promising:
- 40% faster on lix's package.nix at 10000 iterations
- 1.3% faster on nixpkgs all-packages.nix at 1000 iterations
- equivalent on all of nixpkgs concatenated at 100 iterations
(excluding invalid files, each file surrounded with parens)
more realistic benchmarks are somewhere in between the extremes, parsing
once again getting the largest uplift. other realistic workloads improve
by a few percentage points as well, notably system builds are 4% faster.
Benchmarks summary (from ./bench/summarize.jq bench/bench-*.json)
old/bin/nix --extra-experimental-features 'nix-command flakes' eval -f bench/nixpkgs/pkgs/development/haskell-modules/hackage-packages.nix
mean: 0.408s ± 0.025s
user: 0.355s | system: 0.033s
median: 0.389s
range: 0.388s ... 0.442s
relative: 1
new/bin/nix --extra-experimental-features 'nix-command flakes' eval -f bench/nixpkgs/pkgs/development/haskell-modules/hackage-packages.nix
mean: 0.332s ± 0.024s
user: 0.279s | system: 0.033s
median: 0.314s
range: 0.313s ... 0.361s
relative: 0.814
---
old/bin/nix --extra-experimental-features 'nix-command flakes' eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
mean: 6.133s ± 0.022s
user: 5.395s | system: 0.437s
median: 6.128s
range: 6.099s ... 6.183s
relative: 1
new/bin/nix --extra-experimental-features 'nix-command flakes' eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
mean: 5.925s ± 0.025s
user: 5.176s | system: 0.456s
median: 5.934s
range: 5.861s ... 5.943s
relative: 0.966
---
GC_INITIAL_HEAP_SIZE=10g old/bin/nix eval --extra-experimental-features 'nix-command flakes' --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
mean: 4.503s ± 0.027s
user: 3.731s | system: 0.547s
median: 4.499s
range: 4.478s ... 4.541s
relative: 1
GC_INITIAL_HEAP_SIZE=10g new/bin/nix eval --extra-experimental-features 'nix-command flakes' --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
mean: 4.285s ± 0.031s
user: 3.504s | system: 0.571s
median: 4.281s
range: 4.221s ... 4.328s
relative: 0.951
---
old/bin/nix --extra-experimental-features 'nix-command flakes' search --no-eval-cache github:nixos/nixpkgs/e1fa12d4f6c6fe19ccb59cac54b5b3f25e160870 hello
mean: 16.475s ± 0.07s
user: 14.088s | system: 1.572s
median: 16.495s
range: 16.351s ... 16.536s
relative: 1
new/bin/nix --extra-experimental-features 'nix-command flakes' search --no-eval-cache github:nixos/nixpkgs/e1fa12d4f6c6fe19ccb59cac54b5b3f25e160870 hello
mean: 15.973s ± 0.013s
user: 13.558s | system: 1.615s
median: 15.973s
range: 15.946s ... 15.99s
relative: 0.97
---
Change-Id: Ie66ec2d045dec964632c6541e25f8f0797319ee2
This reverts commit 35eec921af.
Reason for revert: Regressed nix-eval-jobs, and it appears to be this change is buggy/missing a case. It just needs another pass.
Code causing the problem in n-e-j, when invoked with `nix-eval-jobs --flake '.#hydraJobs'`:
```
n-e-j/tests/assets » ../../build/src/nix-eval-jobs --meta --workers 1 --flake .#hydraJobs
warning: unknown setting 'trusted-users'
warning: `--gc-roots-dir' not specified
error: unsupported Git input attribute 'dir'
error: worker error: error: unsupported Git input attribute 'dir'
```
```
nix::Value *vRoot = [&]() {
if (args.flake) {
auto [flakeRef, fragment, outputSpec] =
nix::parseFlakeRefWithFragmentAndExtendedOutputsSpec(
args.releaseExpr, nix::absPath("."));
nix::InstallableFlake flake{
{}, state, std::move(flakeRef), fragment, outputSpec,
{}, {}, args.lockFlags};
return flake.toValue(*state).first;
} else {
return releaseExprTopLevelValue(*state, autoArgs, args);
}
}();
```
Inspecting the program behaviour reveals that `dir` was in fact set in the URL going into the fetcher. This is in turn because unlike in the case changed in this commit, it was not erased before handing it to libfetchers, which is probably just a mistake.
```
(rr) up
3 0x00007ffff60262ae in nix::fetchers::Input::fromURL (url=..., requireTree=requireTree@entry=true) at src/libfetchers/fetchers.cc:39
warning: Source file is more recent than executable.
39 auto res = inputScheme->inputFromURL(url, requireTree);
(rr) p url
$1 = (const nix::ParsedURL &) @0x7fffdc874190: {url = "git+file:///home/jade/lix/nix-eval-jobs",
base = "git+file:///home/jade/lix/nix-eval-jobs", scheme = "git+file", authority = std::optional<std::string> = {[contained value] = ""},
path = "/home/jade/lix/nix-eval-jobs", query = std::map with 1 element = {["dir"] = "tests/assets"}, fragment = ""}
(rr) up
4 0x00007ffff789d904 in nix::parseFlakeRefWithFragment (url=".#hydraJobs", baseDir=std::optional<std::string> = {...},
allowMissing=allowMissing@entry=false, isFlake=isFlake@entry=true) at src/libexpr/flake/flakeref.cc:179
warning: Source file is more recent than executable.
179 FlakeRef(Input::fromURL(parsedURL, isFlake), getOr(parsedURL.query, "dir", "")),
(rr) p parsedURL
$2 = {url = "git+file:///home/jade/lix/nix-eval-jobs", base = "git+file:///home/jade/lix/nix-eval-jobs", scheme = "git+file",
authority = std::optional<std::string> = {[contained value] = ""}, path = "/home/jade/lix/nix-eval-jobs", query = std::map with 1 element = {
["dir"] = "tests/assets"}, fragment = ""}
(rr) list
174
175 if (pathExists(flakeRoot + "/.git/shallow"))
176 parsedURL.query.insert_or_assign("shallow", "1");
177
178 return std::make_pair(
179 FlakeRef(Input::fromURL(parsedURL, isFlake), getOr(parsedURL.query, "dir", "")),
180 fragment);
181 }
```
Change-Id: Ib55a882eaeb3e59228857761dc1e3b2e366b0f5e
On operating systems where /bin/sh is not Bash, some scripts are invalid
because of bashisms, and building Lix fails with errors like this:
`render-manpage.sh: 3: set: Illegal option -o pipefail`
This modifies all scripts that use a `/bin/sh` shebang to `/usr/bin/env
bash`, including currently POSIX-compliant ones, to prevent any future
confusion.
Change-Id: Ia074cc6db42d40fc59a63726f6194ea0149ea5e0
This is a squash of upstream PRs #10303, #10312 and #10883.
fix: Treat empty TMPDIR as unset
Fixes an instance of
nix: src/libutil/util.cc:139: nix::Path nix::canonPath(PathView, bool): Assertion `path != ""' failed.
... which I've been getting in one of my shells for some reason.
I have yet to find out why TMPDIR was empty, but it's no reason for
Nix to break.
(cherry picked from commit c3fb2aa1f9d1fa756dac38d3588c836c5a5395dc)
fix: Treat empty XDG_RUNTIME_DIR as unset
See preceding commit. Not observed in the wild, but is sensible
and consistent with TMPDIR behavior.
(cherry picked from commit b9e7f5aa2df3f0e223f5c44b8089cbf9b81be691)
local-derivation-goal.cc: Reuse defaultTempDir()
(cherry picked from commit fd31945742710984de22805ee8d97fbd83c3f8eb)
fix: remove usage of XDG_RUNTIME_DIR for TMP
(cherry picked from commit 1363f51bcb24ab9948b7b5093490a009947f7453)
tests/functional: Add count()
(cherry picked from commit 6221770c9de4d28137206bdcd1a67eea12e1e499)
Remove uncalled for message
(cherry picked from commit b1fe388d33530f0157dcf9f461348b61eda13228)
Add build-dir setting
(cherry picked from commit 8b16cced18925aa612049d08d5e78eccbf0530e4)
Change-Id: Ic7b75ff0b6a3b19e50a4ac8ff2d70f15c683c16a
this is only used in one place, and only to set a nicer error message on
EndOfFile. the only caller that actually *catches* this exception should
provide an error message in that catch block rather than forcing support
for setting error message so deep into the stack. copyStorePath is never
called outside of PathSubstitutionGoal anyway, which catches everything.
Change-Id: Ifbae8706d781c388737706faf4c8a8b7917ca278
The original idea was to fix lix#174, but for a user friendly solution,
I figured that we'd need more consistency:
* Invalid query params will cause an error, just like invalid
attributes. This has the following two consequences:
* The `?dir=`-param from flakes will be removed before the URL to be
fetched is passed to libfetchers.
* The tarball fetcher doesn't allow URLs with custom query params
anymore. I think this was questionable anyways given that an
arbitrary set of query params was silently removed from the URL you
wanted to fetch. The correct way is to use an attribute-set
with a key `url` that contains the tarball URL to fetch.
* Same for the git & mercurial fetchers: in that case it doesn't even
matter though: both fetchers added unused query params to the URL
that's passed from the input scheme to the fetcher (`url2` in the code).
It turns out that this was never used since the query parameters were
erased again in `getActualUrl`.
* Validation happens for both attributes and URLs. Previously, a lot of
fetchers validated e.g. refs/revs only when specified in a URL and
the validity of attribute names only in `inputFromAttrs`.
Now, all the validation is done in `inputFromAttrs` and `inputFromURL`
constructs attributes that will be passed to `inputFromAttrs`.
* Accept all attributes as URL query parameters. That also includes
lesser used ones such as `narHash`.
And "output" attributes like `lastModified`: these could be declared
already when declaring inputs as attribute rather than URL. Now the
behavior is at least consistent.
Personally, I think we should differentiate in the future between
"fetched input" (basically the attr-set that ends up in the lock-file)
and "unfetched input" earlier: both inputFrom{Attrs,URL} entrypoints
are probably OK for unfetched inputs, but for locked/fetched inputs
a custom entrypoint should be used. Then, the current entrypoints
wouldn't have to allow these attributes anymore.
Change-Id: I1be1992249f7af8287cfc37891ab505ddaa2e8cd
If we've consumed the entire input, that doesn't actually mean we're
done decompressing - there might be more output left. This worked (?)
in most cases because the input and output sizes are pretty comparable,
but sometimes they're not and then things get very funny.
Change-Id: I73435a654a911b8ce25119f713b80706c5783c1b
without this we will not be able to get rid of makeDecompressionSink,
which in turn will be necessary to get rid of sourceToSink (since the
libarchive archive wrapper *must* be a Source due to api limitations)
Change-Id: Iccd3d333ba2cbcab49cb5a1d3125624de16bce27
even the transfer function is not all that necessary since there aren't
that many users, but we'll keep it for now. we could've kept both names
but we also kind of want to use `download` for something else very soon
Change-Id: I005e403ee59de433e139e37aa2045c26a523ccbf
Unfetched submodules are included as empty directories in archives, so they end
up as such in the store when fetched in clean mode. Make sure the same happens
in dirty mode too. Fortunately, they are already correctly represented in the
ls-files output, so we just need to make sure to include the empty directory in
our filter.
Fixes: https://github.com/NixOS/nix/issues/6247
Change-Id: I60d06ff360cfa305d081b920838c893c06da801c
* changes:
libstore client: remove remaining dead code
libstore: refuse to serialise ancient protocols
libstore client: remove support for <2.3 clients
libstore daemon: remove very old protocol support (<2.3)
Delete old ValidPathInfo test, fix UnkeyedValidPathInfo
Set up minimum protocol version
with the prepatory work done this mostly means turning plain pointers
into unique_ptrs, with all the associated churn that necessitates. we
might want to change some of these to box_ptrs at some point as well,
but that would be a semantic change that isn't fully appropriate yet.
Change-Id: I0c238c118617420650432f4ed45569baa3e3f413
almost all places where Exprs are passed as pointers expect the pointers
to be non-null. pass them as references to encode this constraint in the
type system as well (and also communicate that Exprs must not be freed).
Change-Id: Ia98f166fec3c23151f906e13acb4a0954a5980a2
The UnkeyedValidPathInfo test was testing an ancient version but not the
current version. Doesn't make much sense to me.
Change-Id: Ib476a4297d9075f2dcd31a073b3e7b149b2189af
This seems to have been caused by having the wrong PID. I don't know why
it worked before in the sandbox, but the code was definitely wrong
before, so let's just fix it.
Change-Id: I556580bdf614c716566310e975a36daa6d6c9a91
Followup to https://gerrit.lix.systems/c/lix/+/1417 to ensure that this
parser will never take something that doesn't look like a version.
It turns out this problem is less alarming than initially thought
because it only applies to the testsuite in a non-default mode.
Change-Id: I26aba24aaf0215f2b782966314b94784db766266
-- message from cl/1418 --
The boehmgc changes are bundled into this commit because doing otherwise
would require an annoying dance of "adding compatibility for < 8.2.6 and
>= 8.2.6" then updating the pin then removing the (now unneeded)
compatibility. It doesn't seem worth the trouble to me given the low
complexity of said changes.
Rebased coroutine-sp-fallback.diff patch taken from https://github.com/NixOS/nixpkgs/pull/317227
-- jade resubmit changes --
This is a resubmission of https://gerrit.lix.systems/c/lix/+/1418, which
was reverted in https://gerrit.lix.systems/c/lix/+/1432 for breaking CI
evaluation without being detected.
I have run `nix flake check -Lv` on this one before submission and it
passes on my machine and crucially without eval errors, so the CI result
should be accurate.
It seems like someone renamed forbiddenDependenciesRegex to
forbiddenDependenciesRegexes in nixpkgs and also changed the type
incompatibly. That's pretty silly, but at least it's just an eval error.
Also, `xonsh` regressed the availability of `xonsh-unwrapped`, but it
was fixed by us in https://github.com/NixOS/nixpkgs/pull/317636, which
is now in our channel, so we update nixpkgs compared to the original
iteration of this to simply get that.
We originally had a regression related to some reorganization of the
nixpkgs lib test suite in which there was broken parameter passing.
This, too, we got quickfixed in nixpkgs, so we don't need any changes
for it: https://github.com/NixOS/nixpkgs/pull/317772
Related: https://gerrit.lix.systems/c/lix/+/1428
Fixes: lix-project/lix#385
Change-Id: I26d41ea826fec900ebcad0f82a727feb6bcd28f3
The libcmd unit test creates files (more specifically, the fetcher cache) in
its home directory. In the single-user sandbox, this leads to the creation of
/homeless-shelter, since this is the default HOME and the root is writable.
Unfortunately, this conflicts with the assumption of the functional tests that
this directory does not exist. Use a different home directory to prevent these
test failures, and thus restore the ability to build inside the single-user
sandbox.
Fixes: lix-project/lix#365
Change-Id: I4df8c53d043234b95a7c0ac45fc5ee89e8d46aff
4b128008c5d9fde881ce1b0a25e60ae0415a14d5 in nixpkgs introduced a default
hashedPasswordFile for root in NixOS tests, which takes precedence over
the password option set in the nix-copy test.
Change-Id: Iffaebec5992e50614b854033f0d14312c8d275b5
Since ad8a4b380e, the version printer returns "nix (Lix, like Nix) 2.x",
hence the `daemonVersion` was being set to the string "like".
Using `compareVersions` with a letter compares them lexicographically:
builtins.compareVersions "like" "2.12pre20230103" // => -1
builtins.compareVersions "like" "2.16.0" // => -1
This caused that `isDaemonNewer` always returned 1, falsy in Bash terms.
Therefore, the test suite skipped those tests where they use it.
Fixes lix-project/lix#324
Change-Id: If6682515bf0bf8b8add641af9a4e98b50a9acb51
They are enabled by default, and Meson will also prints whether or not
they're enabled at the bottom at the end of configuration.
Change-Id: I48db238510bf9e74340b86f243f4bbe360794281
In most real world cases, the Link header is set on the redirect, not on
the final file. This regressed in Lix earlier and while new unit tests
were added to cover it, this integration test should probably have also
caught it.
Change-Id: I2a9d8d952fff36f2c22cfd751451c2b523f7045c
Here's my guide so far:
$ rg '((?!(recursive).*) Nix
(?!(daemon|store|expression|Rocks!|Packages|language|derivation|archive|account|user|sandbox|flake).*))'
-g '!doc/' --pcre2
All items from this query have been tackled. For the documentation side:
that's for lix-project/lix#162.
Additionally, all remaining references to github.com/NixOS/nix which
were not relevant were also replaced.
Fixes: lix-project/lix#148.
Fixes: lix-project/lix#162.
Change-Id: Ib3451fae5cb8ab8cd9ac9e4e4551284ee6794545
Signed-off-by: Raito Bezarius <raito@lix.systems>
This causes libstore, libexpr, libfetchers, and libutil to be linked
with -Wl,--whole-archive to executables, when building statically.
libstore for the store backends, libexpr for the primops, libfetchers
for the fetcher backends I assume(?), and libutil for the nix::logger
initializer (which notably shows in pre-main constructors when HOME is
not owned by the user. cursed.).
This workaround should be removed when #359 is fixed.
Fixes#306.
Change-Id: Ie9ef0154e09a6ed97920ee8ab23810ca5e2de84c
It seems like someone implemented precompiled headers a long time ago
and then it never got ported to meson or maybe didn't work at all.
This is, however, blessedly easy to simply implement. I went looking for
`#define` that could affect the result of precompiling the headers, and
as far as I can tell we aren't doing any of that, so this should truly
just be free build time savings.
Previous state:
Compilation (551 times):
Parsing (frontend): 1302.1 s
Codegen & opts (backend): 956.3 s
New state:
**** Time summary:
Compilation (567 times):
Parsing (frontend): 1123.0 s
Codegen & opts (backend): 1078.1 s
I wonder if the "regression" in codegen time is just doing the PCH
operation a few times, because meson does it per-target.
Change-Id: I664366b8069bab4851308b3a7571bea97ac64022
This reverts commit 285bc67318.
Reason for revert: lix-project/lix#364
For some reason this broke `main` even though the change we are reverting passed CI! Mysterious, haunted, etc. Needs more debugging, let's turn it off for now.
Change-Id: Ica4819d61cd35b83eb52985bfcb657e858f025a9
alois31
jade
eldritch horrors
Robert Hensing
Maximilian Bosch
Qyriad
Ilya K
Pierre Bourdon
Mario Rodas
raito