So I recently saw it the first time in the wild, I liked that you get
interactively asked about the nix.conf settings from the flake, but
there were a few minor things that I'd like to see changed:
* The `(y/N)` was somewhere in the middle of the line. Moved it to
the end. At first I assumed it was a bug because another thread into
my terminal while I was answering the question.
* I had to say no four times for a single flake with two options. So if
you already know you don't want any of the config for _this_ flake, I
found a `No to all` switch that ignores the rest of the nix.conf
settings a little more ergonomic than having to stop the invocation,
looking up the exact wording of `--no-accept-flake-config` and
restarting it. Hence, I added it.
* Added a note where the choices which settings to trust are persisted.
My initial assumption was that this went into `nix.conf` which is not
writable on NixOS, so I said no there as well.
Change-Id: I0a0d9c403f0662df4707697a77f08e6cd003ec6f
This reverts commit 02c35ea9df.
Reason for revert: this code path is also used for `Input::getRev()`, i.e. flakes VCS revision validation, which, in the case of Git, are using SHA1.
As a result, this cause too much noise due to SHA1 revisions in Flakes.
Change-Id: I8064c1ebc26e4e83b627f0803a7a9ba56cfe1f37
random() is not thread-safe, it relies on global state, and calling it
from worker threads can result in multiple threads producing the same
value. It also doesn't guarantee unique values even in single-threaded
use.
Use an atomic counter for the use-case of generating temporary paths,
and switch to a thread-local RNG for the one remaining call.
This will probably fix https://github.com/NixOS/nix/issues/7273 though
I'm not willing to risk corrupting my store to find out.
Change-Id: I4c4c4c9796613573ffefd29cc8efe3d07839facc
Also tweak `pathAccessible` to ignore other relevant errors too. It was
documented as ignoring permission errors but it was only ignoring
`EPERM`, which comes from the darwin sandbox, and not ignoring `EACCESS`
which is the real permission error. I figured it also makes sense to
ignore `ELOOP`.
Fixes: #560
Change-Id: Ibb849b68d07386eb80afb52b57f7d12b3a48a202
Sets the `X-GitHub-Api-Version` header to `2022-11-28` for calls to the
GitHub API.
This follows the later version as per
https://docs.github.com/en/rest/about-the-rest-api/api-versions?apiVersion=2022-11-28.
This affected the check on whether to use the API versus unauthenticated
calls as well, given the headers would no longer be empty if the
authentication token were missing.
The workaround used here is to use a check similar to an existing
check for the token.
In the current implementation, headers are (still) similarly sent to
non-authenticated as well as GitHub on-prem calls.
For what it's worth, manual curl calls with such a header seemed to
break nor unauthenticated calls nor ones to the github.com API.
Change-Id: I6e10839e6b99cb65eb451e923b2a64f5d3c0f578
It's only used in a couple of tests, and only in such a way that
replacing it with a random command suffices.
I also removed a few pointless uses of the variable.
Fixes: #376
Change-Id: I90aedb61d64b02f7c9b007e72f9d614cc1b37a2e
Before:
error: derivation '/nix/store/4spy3nz1661zm15gkybsy1h5f36aliwx-python3.11-test-1.0.0.drv' may not be deterministic: output '/nix/store/ccqcp01zg18wp9iadzmzimqzdi3ll08d-python3.11-test-1.0.0-dist' differs from '/nix/store/ccqcp01zg18wp9iadzmzimqzdi3ll08d-python3.11-test-1.0.0-dist.check'
After:
error: derivation '4spy3nz1661zm15gkybsy1h5f36aliwx-python3.11-test-1.0.0.drv' may not be deterministic: outputs differ
output differs: output '/nix/store/ccqcp01zg18wp9iadzmzimqzdi3ll08d-python3.11-test-1.0.0-dist' differs from '/nix/store/ccqcp01zg18wp9iadzmzimqzdi3ll08d-python3.11-test-1.0.0-dist.check'
output differs: output '/nix/store/yl59v08356i841c560alb0zmk7q16klb-python3.11-test-1.0.0' differs from '/nix/store/yl59v08356i841c560alb0zmk7q16klb-python3.11-test-1.0.0.check'
Change-Id: Ib2871fa602bf1fa9c00e2565b3a2e1b26f908152
let's use the automatic decoding functions curl provides instead of
implementing them ourselves for the dubious ability to support both
xz and bzip2 encodings as well, neither of which anything will send
Change-Id: I3edfebeb596a0e9d5c986efca9270501c996f2dd
previously it was possible to fetchurl a dict server, or an ldap server,
or an imap server. this is a bit of a problem, both because rare schemes
may not be available on all systems, and because some schemes (e.g. scp)
are inherently insecure in potentially surprising ways we needn't allow.
Change-Id: I18fc567c6f58c3221b5ea8ce927f4da780057828
This is capped at 12 because 3.7 seconds of startup is painful enough
and 5.5 seconds with 24 was more annoying.
Change-Id: I327db40fd98deaa5330cd9cf6de99fb07b2c1cb0
Since fb38459d6e, each `ref` is appended
with `refs/heads` unless it starts with `refs/` already. This regressed
two use-cases that worked fine before:
* Specifying a commit hash as `ref`: now, if `ref` looks like a commit
hash it will be directly passed to `git fetch`.
* Specifying a tag without `refs/tags` as prefix: now, the fetcher prepends
`refs/*` to a ref that doesn't start with `refs/` and doesn't look
like a commit hash. That way, both a branch and a tag specified in
`ref` can be fetched.
The order of preference in git is
* file in `refs/` (e.g. `HEAD`)
* file in `refs/tags/`
* file in `refs/heads` (i.e. a branch)
After fetching `refs/*`, ref is resolved the same way as git does.
Change-Id: Idd49b97cbdc8c6fdc8faa5a48bef3dec25e4ccc3
When `nix fmt` is called without an argument, Nix appends the "." argument before calling the formatter. The comment in the code is:
> Format the current flake out of the box
This also happens when formatting sub-folders.
This means that the formatter is now unable to distinguish, as an interface, whether the "." argument is coming from the flake or the user's intent to format the current folder. This decision should be up to the formatter.
Treefmt, for example, will automatically look up the project's root and format all the files. This is the desired behaviour. But because the "." argument is passed, it cannot function as expected.
Upstream-PR: https://github.com/nixos/nix/pull/11438
Change-Id: I60fb6b3ed4ec1b24f81b5f0d76c0be98470817ce
This is better for privacy and to avoid leaking netrc credentials in a
MITM attack, but also the assumption that we check the hash no longer
holds in some cases (in particular for impure derivations).
Partially reverts 5db358d4d7.
(cherry picked from commit c04bc17a5a0fdcb725a11ef6541f94730112e7b6)
(cherry picked from commit f2f47fa725fc87bfb536de171a2ea81f2789c9fb)
(cherry picked from commit 7b39cd631e0d3c3d238015c6f450c59bbc9cbc5b)
Upstream-PR: https://github.com/NixOS/nix/pull/11585
Change-Id: Ia973420f6098113da05a594d48394ce1fe41fbb9
These stack traces kind of suck for the reasons mentioned on the
CppTrace page here (no symbols for inline functions is a major one):
https://github.com/jeremy-rifkin/cpptrace
I would consider using CppTrace if it were packaged, but to be honest, I
think that the more reasonable option is actually to move entirely to
out-of-process crash handling and symbolization.
The reason for this is that if you want to generate anything of
substance on SIGSEGV or really any deadly signal, you are stuck in
async-signal-safe land, which is not a place to be trying to run a
symbolizer. LLVM does it anyway, probably carefully, and chromium *can*
do it on debug builds but in general uses crashpad:
https://source.chromium.org/chromium/chromium/src/+/main:base/debug/stack_trace_posix.cc;l=974;drc=82dff63dbf9db05e9274e11d9128af7b9f51ceaa;bpv=1;bpt=1
However, some stack traces are better than *no* stack traces when we get
mystery exceptions falling out the bottom of the program. I've also
promoted the path for "mystery exceptions falling out the bottom of the
program" to hard crash and generate a core dump because although there's
been some months since the last one of these, these are nonetheless
always *atrociously* diagnosed.
We can't improve the crash handling further until either we use Crashpad
(which involves more C++ deps, no thanks) or we put in the ostensibly
work in progress Rust minidump infrastructure, in which case we need to
finish full support for Rust in libutil first.
Sample report:
Lix crashed. This is a bug. We would appreciate if you report it at https://git.lix.systems/lix-project/lix/issues with the following information included:
Exception: std::runtime_error: lol
Stack trace:
0# nix::printStackTrace() in /home/jade/lix/lix3/build/src/nix/../libutil/liblixutil.so
1# 0x000073C9862331F2 in /home/jade/lix/lix3/build/src/nix/../libmain/liblixmain.so
2# 0x000073C985F2E21A in /nix/store/p44qan69linp3ii0xrviypsw2j4qdcp2-gcc-13.2.0-lib/lib/libstdc++.so.6
3# 0x000073C985F2E285 in /nix/store/p44qan69linp3ii0xrviypsw2j4qdcp2-gcc-13.2.0-lib/lib/libstdc++.so.6
4# nix::handleExceptions(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::function<void ()>) in /home/jade/lix/lix3/build/src/nix/../libmain/liblixmain.so
5# 0x00005CF65B6B048B in /home/jade/lix/lix3/build/src/nix/nix
6# 0x000073C985C8810E in /nix/store/dbcw19dshdwnxdv5q2g6wldj6syyvq7l-glibc-2.39-52/lib/libc.so.6
7# __libc_start_main in /nix/store/dbcw19dshdwnxdv5q2g6wldj6syyvq7l-glibc-2.39-52/lib/libc.so.6
8# 0x00005CF65B610335 in /home/jade/lix/lix3/build/src/nix/nix
Change-Id: I1a9f6d349b617fd7145a37159b78ecb9382cb4e9
This caused an absolute saga which I would not like anyone else to have
to experience. Let's put in a laser targeted error message that
diagnoses this exact problem.
Fixes: #484
Change-Id: I2a79f04aeb4a1b67c10115e5e39501d958836298
I don't know why the AWS sdk disabled it by default. It would be nice
to have test coverage of the s3 store or proxies, but neither currently
exist.
Fixes: #433
Change-Id: If1e76169a3d66dbec2e926af0d0d0eccf983b97b
This avoids C++'s standard library regexes, which aren't the same
across platforms, and have many other issues, like using stack
so much that they stack overflow when processing a lot of data.
To avoid backwards and forward compatibility issues, regexes are
processed using a function converting libstdc++ regexes into Boost
regexes, escaping characters that Boost needs to have escaped, and
rejecting features that Boost has and libstdc++ doesn't.
Related context:
- Original failed attempt to use `boost::regex` in CppNix, failed due to
boost icu dependency being large (disabling ICU is no longer necessary
because linking ICU requires using a different header file,
`boost/regex/icu.hpp`): https://github.com/NixOS/nix/pull/3826
- An attempt to use PCRE, rejected due to providing less backwards
compatibility with `std::regex` than `boost::regex`:
https://github.com/NixOS/nix/pull/7336
- Second attempt to use `boost::regex`, failed due to `}` regex failing
to compile (dealt with by writing a wrapper that parses a regular
expression and escapes `}` characters):
https://github.com/NixOS/nix/pull/7762Closes#34. Closes#476.
Change-Id: Ieb0eb9e270a93e4c7eed412ba4f9f96cb00a5fa4
implementing a build hook is pretty much impossible without either being
a nix, or blindly forwarding the important bits of all build requests to
some kind of nix. we've found no uses of build-hook in the wild, and the
build-hook protocol (apart from being entirely undocumented) is not able
to convey any kind of versioning information between hook and daemon. if
we want to upgrade this infrastructure (which we do), this must not stay
Change-Id: I1ec4976a35adf8105b8ca9240b7984f8b91e147e
The |> operator is a reverse function operator with low binding strength
to replace lib.pipe. Implements RFC 148, see the RFC text for more
details. Closes#438.
Change-Id: I21df66e8014e0d4dd9753dd038560a2b0b7fd805
This adds a second form to the `:log` command: it now can accept a
derivation path in addition to a derivation expression. As derivation
store paths start with `/nix/store`, this is not ambiguous.
Resolves: #51
Change-Id: Iebc7b011537e7012fae8faed4024ea1b8fdc81c3
This has been causing various seemingly spurious CI failures as well as
some failures on people running tests on beta builds.
lix> ++(nix-collect-garbage-dry-run.sh:20) nix-store --gc --print-dead
lix> ++(nix-collect-garbage-dry-run.sh:20) wc -l
lix> finding garbage collector roots...
lix> error: Listing pid 87261 file descriptors: Undefined error: 0
There is no real way to write a proper test for this, other than to
start a process like the following:
int main(void) {
for (int i = 0; i < 1000; ++i) {
close(i);
}
sleep(10000);
}
and then let Lix's gc look at it.
I have a relatively high confidence this *will* fix the problem since I
have manually confirmed the behaviour of the libproc call is
as-unexpected, and it would perfectly explain the observed symptom.
Fixes: #446
Change-Id: I67669b98377af17895644b3bafdf42fc33abd076
This was always in the lock file and we can simply actually print it.
The test for this is a little bit silly but it should correctly
control for my daring to exercise timezone code *and* locale code in a
test, which I strongly suspect nobody dared do before.
Sample (abridged):
```
Path: /nix/store/gaxb42z68bcr8lch467shvmnhjjzgd8b-source
Last modified: 1970-01-01 00:16:40
Inputs:
├───flake-compat: github:edolstra/flake-compat/0f9255e01c2351cc7d116c072cb317785dd33b33
│ Last modified: 2023-10-04 13:37:54
├───flake-utils: github:numtide/flake-utils/b1d9ab70662946ef0850d488da1c9019f3a9752a
│ Last modified: 2024-03-11 08:33:50
│ └───systems: github:nix-systems/default/da67096a3b9bf56a91d16901293e51ba5b49a27e
│ Last modified: 2023-04-09 08:27:08
```
Change-Id: I355f82cb4b633974295375ebad646fb6e2107f9b
Maximilian Bosch
Lily Ballard
Kiara Grouwstra
raito
Aria
Linus Heckemann
V.
eldritch horrors
jade
Rebecca Turner
Jonas Chevalier
sugar🍬🍭🏳️⚧️
piegames
Max “Goldstein” Siling