This is a shameless layering violation in favour of UX. It falls back
trivially to "unknown", so it's purely a UX feature.
Diagnostic sample:
```
error: hash mismatch in fixed-output derivation '/nix/store/sjfw324j4533lwnpmr5z4icpb85r63ai-x1.drv':
likely URL: https://meow.puppy.forge/puppy.tar.gz
specified: sha256-AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=
got: sha256-a1Qvp3FOOkWpL9kFHgugU1ok5UtRPSu+NwCZKbbaEro=
```
Change-Id: I873eedcf7984ab23f57a6754be00232b5cb5b02c
This is a squash of upstream PRs #10303, #10312 and #10883.
fix: Treat empty TMPDIR as unset
Fixes an instance of
nix: src/libutil/util.cc:139: nix::Path nix::canonPath(PathView, bool): Assertion `path != ""' failed.
... which I've been getting in one of my shells for some reason.
I have yet to find out why TMPDIR was empty, but it's no reason for
Nix to break.
(cherry picked from commit c3fb2aa1f9d1fa756dac38d3588c836c5a5395dc)
fix: Treat empty XDG_RUNTIME_DIR as unset
See preceding commit. Not observed in the wild, but is sensible
and consistent with TMPDIR behavior.
(cherry picked from commit b9e7f5aa2df3f0e223f5c44b8089cbf9b81be691)
local-derivation-goal.cc: Reuse defaultTempDir()
(cherry picked from commit fd31945742710984de22805ee8d97fbd83c3f8eb)
fix: remove usage of XDG_RUNTIME_DIR for TMP
(cherry picked from commit 1363f51bcb24ab9948b7b5093490a009947f7453)
tests/functional: Add count()
(cherry picked from commit 6221770c9de4d28137206bdcd1a67eea12e1e499)
Remove uncalled for message
(cherry picked from commit b1fe388d33530f0157dcf9f461348b61eda13228)
Add build-dir setting
(cherry picked from commit 8b16cced18925aa612049d08d5e78eccbf0530e4)
Change-Id: Ic7b75ff0b6a3b19e50a4ac8ff2d70f15c683c16a
Add the log-formats `multiline` and `multiline-with-logs` which offer
multiple current active building status lines.
Change-Id: Idd8afe62f8591b5d8b70e258c5cefa09be4cab03
This uses a minor hack in which we check the rl_line_buffer global
variable to workaround editline not including the colon in its
completion callback.
Fixes#361
Change-Id: Id159d209c537443ef5e37a975982e8e12ce1f486
For now we just need to put the release notes in the final spot. We will
have to fix the date on both 2.90 and 2.91 branches, but such as it is.
Release created with releng/create_release.xsh
Closes: lix-project/lix#318
Change-Id: I38e79b40e7f632c8a286f2f09865a84dc93eca90
We realized that there's really no good place to put these dev facing
bulletins, and the user-facing release notes aren't really the worst
place to put them, I guess, and we do kind of hope that it converts
users to devs.
Change-Id: Id9387b2964fe291cb5a3f74ad6344157f19b540c
Seccomp filtering and the no-new-privileges functionality improve the security
of the sandbox, and have been enabled by default for a long time. In
lix-project/lix#265 it was decided that they
should be enabled unconditionally. Accordingly, remove the allow-new-privileges
(which had weird behavior anyway) and filter-syscall settings, and force the
security features on. Syscall filtering can still be enabled at build time to
support building on architectures libseccomp doesn't support.
Change-Id: Iedbfa18d720ae557dee07a24f69b2520f30119cb
This breaks downstreams linking to us on purpose to make sure that if
someone is linking to Lix they're doing it on purpose and crucially not
mixing up Nix and Lix versions in compatibility code.
We still need to fix the internal includes to follow the same schema so
we can drop the single-level include system entirely. However, this
requires a little more effort.
This adds pkg-config for libfetchers and config.h.
Migration path:
expr.hh -> lix/libexpr/expr.hh
nix/config.h -> lix/config.h
To apply this migration automatically, remove all `<nix/>` from
includes, so: `#include <nix/expr.hh>` -> `#include <expr.hh>`. Then,
the correct paths will be resolved from the tangled mess, and the
clang-tidy automated fix will work.
Then run the following for out of tree projects:
```
lix_root=$HOME/lix
(cd $lix_root/clang-tidy && nix develop -c 'meson setup build && ninja -C build')
run-clang-tidy -checks='-*,lix-fixincludes' -load=$lix_root/clang-tidy/build/liblix-clang-tidy.so -p build/ -fix src
```
Related: lix-project/nix-eval-jobs#5
Fixes: lix-project/lix#279
Change-Id: I7498e903afa6850a731ef8ce77a70da6b2b46966
Also fix typos introduced by the commits I read.
I have run the addDrvOutputDependencies release note past Ericson since
I was confused by what the heck it was doing, and he was saying it was
reasonable.
Change-Id: Id015353b00938682f7faae7de43df7f991a5237e
This turns errors like:
error: flake output attribute 'hydraJobs' is not a derivation or path
into errors like:
error: expected flake output attribute 'hydraJobs' to be a derivation or
path but found a set: { binaryTarball = «thunk»; build = «thunk»; etc> }
This change affects all InstallableFlake commands.
Change-Id: I899757af418b6f98201006ec6ee13a448c07077c
Fixes#183, #110, #116.
The default flake-registry option becomes 'vendored', and refers
to a vendored flake-registry.json file in the install path.
Vendored copy of the flake-registry is from github:NixOS/flake-registry
at commit 9c69f7bd2363e71fe5cd7f608113290c7614dcdd.
Change-Id: I752b81c85ebeaab4e582ac01c239d69d65580f37
This builtin was always a problem and nixpkgs uses it in exactly one
place, to give up if the Nix version is absurdly old. It has no other
use cases, and doesn't work in a multi-implementation world anyway.
Change-Id: I03c36e118591029e2ef14b091fe14a311c66a08a
This does not add missing release notes, and it doesn't do anything
about the profiles feature we would really like to have so we can have
consistent credit.
Change-Id: I72a6f7acfcff85f380be17dac76501a6f4693776
Basically I'd expect the same behavior as with `nix-build`, i.e.
with `--keep-going` the hash-mismatch error of each failing
fixed-output derivation is shown.
The approach is derived from `Store::buildPaths` (`entry-point.cc`):
instead of throwing the first build-result, check if there are any build
errors and if so, display all of them and throw after that.
Unfortunately, the BuildResult struct doesn't have an `ErrorInfo`
(there's a FIXME for that at least), so I have to construct my own here.
This is a rather cheap bugfix and I decided against touching too many
parts of libstore for that (also I don't know if that's in line with the
ongoing refactoring work).
Closes lix-project/lix#302
Change-Id: I378ab984fa271e6808c6897c45e0f070eb4c6fac
The interrupt-blocking code was originally introduced 20 years ago so that
trying to log an error message does not result in an interrupt exception being
thrown and then going unhandled (c8d3882cdc).
However, the logging code does not check for interrupts any more
(054be50257), so this reasoning is no longer
applicable. Delete this code so that later interrupts are unblocked again, for
example in the next line entered into the repl.
Closes: lix-project/lix#296
Change-Id: I48253f5f4272e75001148c13046e709ef5427fbd
This doesn't comprehensively fix everything outdated in the manual, or
make the manual greatly better, but it does note down where at least
jade noticed it was wrong, and it does fix all the instances of
referencing Nix to conform to the style guide to the best of our
ability.
A lot of things have been commented out for being wrong, and there are
three types of FIXME introduced:
- FIXME(Lix): generically Lix needs to fix it
- FIXME(Qyriad): re lix-project/lix#215
- FIXME(meson): docs got outdated by meson changes and need rewriting
I did fix a bunch of it that I could, but there could certainly be
mistakes and this is definitely just an incremental improvement.
Fixes: lix-project/lix#266
Change-Id: I5993c4603d7f026a887089fce77db08394362135
This reverts commit a8b3d777fb.
This undoes the revert of PR#6621, which allows nested `follows`, i.e.
{
inputs = {
foo.url = "github:bar/foo";
foo.inputs.bar.inputs.nixpkgs = "nixpkgs";
};
}
does the expected thing now. This is useful to avoid the 1000 instances
of nixpkgs problem without having each flake in the dependency tree to
expose all of its transitive dependencies for modification.
This was in fact part of Nix before and the C++ changes applied w/o
conflicts. However, it got reverted then because people didn't want to
merge lazy-trees against it which was supposed to be merged soon back in
October 2022.
Fixes: lix-project/lix#201
Change-Id: I5ddef914135b695717b2ef88862d57ced5e7aa3c
With Linux kernel >=6.6 & glibc 2.39 a `fchmodat2(2)` is available that
isn't filtered away by the libseccomp sandbox.
Being able to use this to bypass that restriction has surprising results
for some builds such as lxc[1]:
> With kernel ≥6.6 and glibc 2.39, lxc's install phase uses fchmodat2,
> which slips through 9b88e52846/src/libstore/build/local-derivation-goal.cc (L1650-L1663).
> The fixupPhase then uses fchmodat, which fails.
> With older kernel or glibc, setting the suid bit fails in the
> install phase, which is not treated as fatal, and then the
> fixup phase does not try to set it again.
Please note that there are still ways to bypass this sandbox[2] and this is
mostly a fix for the breaking builds.
This change works by creating a syscall filter for the `fchmodat2`
syscall (number 452 on most systems). The problem is that glibc 2.39
is needed to have the correct syscall number available via
`__NR_fchmodat2` / `__SNR_fchmodat2`, but this flake is still on
nixpkgs 23.11. To have this change everywhere and not dependent on the
glibc this package is built against, I added a header
"fchmodat2-compat.hh" that sets the syscall number based on the
architecture. On most platforms its 452 according to glibc with a few
exceptions:
$ rg --pcre2 'define __NR_fchmodat2 (?!452)'
sysdeps/unix/sysv/linux/x86_64/x32/arch-syscall.h
58:#define __NR_fchmodat2 1073742276
sysdeps/unix/sysv/linux/mips/mips64/n32/arch-syscall.h
67:#define __NR_fchmodat2 6452
sysdeps/unix/sysv/linux/mips/mips64/n64/arch-syscall.h
62:#define __NR_fchmodat2 5452
sysdeps/unix/sysv/linux/mips/mips32/arch-syscall.h
70:#define __NR_fchmodat2 4452
sysdeps/unix/sysv/linux/alpha/arch-syscall.h
59:#define __NR_fchmodat2 562
I added a small regression-test to the setuid integration-test that
attempts to set the suid bit on a file using the fchmodat2 syscall.
I confirmed that the test fails without the change in
local-derivation-goal.
Additionally, we require libseccomp 2.5.5 or greater now: as it turns
out, libseccomp maintains an internal syscall table and
validates each rule against it. This means that when using libseccomp
2.5.4 or older, one may pass `452` as syscall number against it, but
since it doesn't exist in the internal structure, `libseccomp` will refuse
to create a filter for that. This happens with nixpkgs-23.11, i.e. on
stable NixOS and when building Lix against the project's flake.
To work around that
* a backport of libseccomp 2.5.5 on upstream nixpkgs has been
scheduled[3].
* the package now uses libseccomp 2.5.5 on its own already. This is to
provide a quick fix since the correct fix for 23.11 is still a staging cycle
away.
We still need the compat header though since `SCMP_SYS(fchmodat2)`
internally transforms this into `__SNR_fchmodat2` which points to
`__NR_fchmodat2` from glibc 2.39, so it wouldn't build on glibc 2.38.
The updated syscall table from libseccomp 2.5.5 is NOT used for that
step, but used later, so we need both, our compat header and their
syscall table 🤷
Relevant PRs in CppNix:
* https://github.com/NixOS/nix/pull/10591
* https://github.com/NixOS/nix/pull/10501
[1] https://github.com/NixOS/nixpkgs/issues/300635#issuecomment-2031073804
[2] https://github.com/NixOS/nixpkgs/issues/300635#issuecomment-2030844251
[3] https://github.com/NixOS/nixpkgs/pull/306070
(cherry picked from commit ba6804518772e6afb403dd55478365d4b863c854)
Change-Id: I6921ab5a363188c6bff617750d00bb517276b7fe
Part of #7672
My main motivation is to be able to use `nix.checkConfig`[1]. This
doesn't work with Lix currently since the module uses `nix show-config`
if the Nix version is <2.20pre and `nix config show` otherwise. I think
this is the only instance where nixpkgs checks for which Nix commands
exist that affects us now, so I figured we could just perform the rename
here as well[2] and still provide the current version number[3].
I don't have a strong opinion on whether to deprecate `nix show-config`,
the warning is added there automatically.
(cherry picked from commit f300e11b056dea414d7d77bbc6e5a7dc5d9ddd41)
[1] https://nixos.org/manual/nixos/stable/options.html#opt-nix.checkConfig
[2] I should add that I don't use the "official" ways of installing Lix
because using the flake directly and callPackaging it seemed to fit
better into my workflow: I already have a little mess to make
sure Hydra from the flake uses the correct pkgs.nix and I didn't
want to complicate it further while keeping a single package-set I
can build in CI. Don't get me wrong, I think such a module for a
quick-start is very important, just giving context on why I bother
in the first place :)
[3] When we go public, I think it's worth considering to add support in
nixpkgs itself for Lix.
Change-Id: I47b4239b05cbeda3c370d2fa56ea768b768768ac
* changes:
nix3-profile: remove check "name" attr in manifests
Add profile migration test
nix3-profile: make element names stable
getNameFromURL(): Support uppercase characters in attribute names
nix3-profile: remove indices
nix3-profile: allow using human-readable names to select packages
implement parsing human-readable names from URLs
As discussed in the maintainer meeting on 2024-01-29.
Mainly this is to avoid a situation where the name is parsed and
treated as a file name, mostly to protect users.
.-* and ..-* are also considered invalid because they might strip
on that separator to remove versions. Doesn't really work, but that's
what we decided, and I won't argue with it, because .-* probably
doesn't seem to have a real world application anyway.
We do still permit a 1-character name that's just "-", which still
poses a similar risk in such a situation. We can't start disallowing
trailing -, because a non-zero number of users will need it and we've
seen how annoying and painful such a change is.
What matters most is preventing a situation where . or .. can be
injected, and to just get this done.
(cherry picked from commit f1b4663805a9dbcb1ace64ec110092d17c9155e0)
Change-Id: I900a8509933cee662f888c3c76fa8986b0058839
nix3-profile automatically migrates any profile its used on to its style
of profile -- the ones with manifest.json instead of manifest.nix. On
non-NixOS systems, Nix is conventionally installed to the profile at
/nix/var/nix/profiles/default, so if a user passed that to `--profile`
of `nix profile`, then it would break upgrade-nix from ever working
again, without recreating the profile.
This commit fixes that, and allows upgrade-nix to work on either kind of
profile.
Fixes#16.
Change-Id: I4c49b1beba93bb50e8f8a107edc451affe08c3f7
Previously, errors while printing values in `nix repl` would be printed
in `«error: ...»` brackets rather than displayed normally:
```
nix-repl> legacyPackages.aarch64-darwin.pythonPackages.APScheduler
«error: Package ‘python-2.7.18.7’ in /nix/store/6s0m1qc31zw3l3kq0q4wd5cp3lqpkq0q-source/pkgs/development/interpreters/python/cpython/2.7/default.nix:335 is marked as insecure, refusing to evaluate.»
```
Now, errors will be displayed normally if they're emitted at the
top-level of an expression:
```
nix-repl> legacyPackages.aarch64-darwin.pythonPackages.APScheduler
error:
… in the condition of the assert statement
at /nix/store/6s0m1qc31zw3l3kq0q4wd5cp3lqpkq0q-source/lib/customisation.nix:268:17:
267| in commonAttrs // {
268| drvPath = assert condition; drv.drvPath;
| ^
269| outPath = assert condition; drv.outPath;
… in the left operand of the OR (||) operator
at /nix/store/6s0m1qc31zw3l3kq0q4wd5cp3lqpkq0q-source/pkgs/development/interpreters/python/passthrufun.nix:28:45:
27| if lib.isDerivation value then
28| lib.extendDerivation (valid value || throw "${name} should use `buildPythonPackage` or `toPythonModule` if it is to be part of the Python packages set.") {} value
| ^
29| else
(stack trace truncated; use '--show-trace' to show the full trace)
error: Package ‘python-2.7.18.7’ in /nix/store/6s0m1qc31zw3l3kq0q4wd5cp3lqpkq0q-source/pkgs/development/interpreters/python/cpython/2.7/default.nix:335 is marked as insecure, refusing to evaluate.
```
Errors emitted in nested structures (like e.g. when printing `nixpkgs`)
will still be printed in brackets.
Change-Id: I25aeddf08c017582718cb9772a677bf51b9fc2ad
Adds a `repl-overlays` option, which specifies files that can overlay
and modify the top-level bindings in `nix repl`. For example, with the
following contents in `~/.config/nix/repl.nix`:
info: final: prev: let
optionalAttrs = predicate: attrs:
if predicate
then attrs
else {};
in
optionalAttrs (prev ? legacyPackages && prev.legacyPackages ? ${info.currentSystem})
{
pkgs = prev.legacyPackages.${info.currentSystem};
}
We can run `nix repl` and use `pkgs` to refer to `legacyPackages.${currentSystem}`:
$ nix repl --repl-overlays ~/.config/nix/repl.nix nixpkgs
Lix 2.90.0
Type :? for help.
Loading installable 'flake:nixpkgs#'...
Added 5 variables.
Loading 'repl-overlays'...
Added 6 variables.
nix-repl> pkgs.bash
«derivation /nix/store/g08b5vkwwh0j8ic9rkmd8mpj878rk62z-bash-5.2p26.drv»
Change-Id: Ic12e0f2f210b2f46e920c33088dfe1083f42391a
This is terrible UX, and frankly an eval failure should be a cache
invalidation anyway.
This removes the CachedEvalError type entirely.
Fixes#223.
Change-Id: I91f8003eabd0ea45003024e96d1de3c7ae8e49d8
For a long time `nix repl` has supported displaying documentation set on
builtins, however, it has long been convention to use Markdown comments
on Nix functions themselves for documentation. This exposes that
information to `nix repl` users in a nice and formatted way.
NixOS/rfcs#145 doc-comments are primarily what this feature is intended
to consume, however, support for lambda documentation in the repl is
experimental. We do our best effort to support the RFC here.
These changes are based on [the nix-doc library](https://github.com/lf-/nix-doc) and
are licensed under the terms described in the relevant source files.
Change-Id: Ic6fe947d39a22540705d890737e336c4720b0a22
jade
Robert Hensing
kloenk
Qyriad
Maximilian Bosch
alois31
puck
julia
Rebecca Turner
Lunaphied