Commit graph

859 commits

Author SHA1 Message Date
Greg Price 26851dd2c2 installer: Set files read-only when copying into store
After installing Nix, I found that all the files and directories
initially copied into the store were writable, with mode 644 or 755:

  drwxr-xr-x 9 root root 4096 Dec 31  1969 /nix/store/ddmmzn4ggz1f66lwxjy64n89864yj9w9-nix-2.3.3

The reason is that that's how they were in the unpacked tarball, and
the install-multi-user script used `rsync -p` without doing anything
else to affect the permissions.

The plain `install` script for a single-user install takes care to
do a `chmod -R a-w` on each store path copied.  We could do the same
here with one more command; or we can pass `--chmod` to rsync, to
have it write the files with the desired modes in the first place.

Tested the new `rsync` command on both a Linux machine with a
reasonably-modern rsync (3.1.3) and a Mac with its default, ancient,
rsync 2.6.9, and it works as expected on both.  Thankfully the latter
is just new enough to have `--chmod`, which dates to rsync 2.6.7.
2020-03-22 23:07:20 -07:00
Philipp Middendorf 9450dece24 installer: also test for xz to unpack 2020-03-21 09:31:39 +01:00
Robert Hensing 9080d5d924 README, error msg: http -> https 2020-03-11 19:41:22 +01:00
Eelco Dolstra e063c71a79
nixos.org/releases -> releases.nixos.org 2020-03-11 10:33:23 +01:00
Rovanion Luckey a413594baf installer: Handle edge case where the nix-daemon is already running on the system
On a systemd-based Linux distribution: If the user has previously had multi-user Nix installed on the system, removed it and then reinstalled multi-user Nix again the old nix-daemon.service will still be running when `scripts/install-systemd-multi-user.sh` tries to start it which results in nothing being done and the old daemon continuing its run.

When a normal user then tries to use Nix through the daemon the nix binary will fail to connect to the nix-daemon as it does not belong to the currently installed Nix system. See below for steps to reproduce the issue that motivated this change.

$ sh <(curl https://nixos.org/nix/install) --daemon

$ sudo rm -rf /etc/nix /nix /root/.nix-profile /root/.nix-defexpr /root/.nix-channels /home/nix-installer/.nix-profile /home/nix-installer/.nix-defexpr /home/nix-installer/.nix-channels ~/.nix-channels ~/.nix-defexpr/ ~/.nix-profile /etc/profile.d/nix.sh.backup-before-nix /etc/profile.d/nix.sh; sed -i '/added by Nix installer$/d' ~/.bash_profile

$ unset NIX_REMOTE

$ sh <(curl https://nixos.org/nix/install) --daemon

└$ export NIX_REMOTE=daemon

└$ nix-env -iA nixpkgs.hello
installing 'hello-2.10'
error: cannot connect to daemon at '/nix/var/nix/daemon-socket/socket': No such file or directory
(use '--show-trace' to show detailed location information)

└$ sudo systemctl restart nix-daemon.service

└$ nix-env -iA nixpkgs.hello
installing 'hello-2.10'
these paths will be fetched (6.09 MiB download, 27.04 MiB unpacked):
  /nix/store/2g75chlbpxlrqn15zlby2dfh8hr9qwbk-hello-2.10
  /nix/store/aag9d1y4wcddzzrpfmfp9lcmc7skd7jk-glibc-2.27
copying path '/nix/store/aag9d1y4wcddzzrpfmfp9lcmc7skd7jk-glibc-2.27' from 'https://cache.nixos.org'...
copying path '/nix/store/2g75chlbpxlrqn15zlby2dfh8hr9qwbk-hello-2.10' from 'https://cache.nixos.org'...
building '/nix/store/w9adagg6vlikr799nkkqc9la5hbbpgmi-user-environment.drv'...
created 2 symlinks in user environment
2020-01-23 14:48:53 +01:00
Michael Forney 43eb7b6756 Pass -J to tar for xz decompression
Some tar implementations can't auto-detect compression formats, so
they must be specified explicitly.
2019-12-22 17:17:14 -08:00
Michael Forney 10414d467b Pass -P to cp to preserve symlinks
This is commonly the default behavior with -R, but POSIX leaves the
default unspecified.
2019-12-21 21:30:38 -08:00
Eelco Dolstra ec9dd9a5ae
Provide a default value for NIX_PATH 2019-11-22 22:08:51 +01:00
Eelco Dolstra 1c3ccba0f5
Remove $NIX_USER_PROFILE_DIR
This is not used anywhere.
2019-11-22 16:27:48 +01:00
Eelco Dolstra 2f96a89646 install-multi-user.sh: Remove unused variables
https://hydra.nixos.org/build/104119659
2019-10-23 21:24:21 +02:00
Steven Shaw f0ec4b4ce4
Fix unset variable in installer 2019-10-19 13:26:06 +10:00
Eelco Dolstra 9277e72cb0
Typo 2019-10-09 23:35:02 +02:00
Eelco Dolstra c9159f86cc
nix-env: Create ~/.nix-defexpr automatically 2019-10-09 23:35:02 +02:00
Eelco Dolstra 61a6176aca
nix-profile.sh: Remove coreutils dependency 2019-10-09 23:35:02 +02:00
Eelco Dolstra 9348f9291e
nix-env: Create ~/.nix-profile automatically 2019-10-09 23:35:01 +02:00
Eelco Dolstra 26762ceb86
nix-profile.sh: Don't create .nix-channels
This is already done by the installer, so no need to do it again.
2019-10-09 23:35:01 +02:00
Eelco Dolstra c43d9f6131
Remove some redundant initialization 2019-10-09 23:35:01 +02:00
Eelco Dolstra 5a303093dc
Remove world-writability from per-user directories
'nix-daemon' now creates subdirectories for users when they first
connect.

Fixes #509 (CVE-2019-17365).
Should also fix #3127.
2019-10-09 23:34:48 +02:00
Matthew Bauer d4e51aac08 Make preexisting Nix install a warning, not a failure
In the multi-user install script, we originally made sure no previous
references to Nix existed. This prevented any previous installs from
contaminating the new install. However, some users need the ability to
repair their existing Nix installation without uninstalling all
references to Nix. This change allows users with existing Nix
installations to use the installer, while still outputing a warning
message on the dangers of this. As a result, the multi-user install
script work much more like the single-user install script has worked
in the past.

This is a requirement for macOS Catalina users now that
/Library/LaunchDaemons/org.nixos.nix-daemon.plisg is not managed by
the Nix store. If there is ever a change to the .plist, all users will
need to rerun this install script to get the new changes. Otherwise,
changes to the launch daemon will require manual interventions.
2019-10-08 21:53:06 -04:00
Matthew Bauer 0847f2f1b3 Copy instead of linking launch agent
On Catalina, the /nix filesystem might not be mounted at start time.
To avoid this service not starting, we need to keep the launch agent
outside of the Nix store. A wait4pid will hold for our /nix dir to be
mounted.

Fixes #3125.
2019-10-08 21:52:17 -04:00
Eelco Dolstra ad03159e25
Merge pull request #2745 from samueldr/install/detect-systemd-separately
install-multi-user: Detect and fail lack of systemd separately
2019-08-28 11:34:23 +02:00
Eelco Dolstra bd285849ed
Merge pull request #3054 from matthewbauer/nix-dir-macos
Allow empty /nix directory in multi-user installer
2019-08-28 11:29:43 +02:00
Eelco Dolstra ceefddafe8 Compress binary tarballs using xz
Fixes https://github.com/NixOS/nix/issues/240.

Apparently 'tar -xf' can decompress xz files on macOS nowadays.
2019-08-27 22:18:34 +02:00
Venkateswara Rao Mandela 6dab42a551
installer: handle network proxy in systemd install
If a network proxy configuration is detected, setup an override
systemd unit file for nix-daemon service with the non-empty
proxy variables.

Proxy detection is performed by looking for http/https/ftp proxy and no
proxy variables in user environment
2019-08-24 09:08:41 -04:00
Matthew Bauer 0463d5e36f Allow empty /nix directory in multi-user installer
With macOS catalina, we can no longer modify the root system
volume (#2925). macOS provides a system configuration file in
synthetic.conf(5) to create empty root directories. This can be used
to mount /nix to a separate volume. As a result, this directory will
need to already exist prior to installation. Instead, check for
/nix/store and /nix/var for a live Nix installation.
2019-08-22 23:38:52 -04:00
Matthew Bauer c82a856b36 Add default for USER when unset
uses $(id -u -n) when USER is unset, this is needed on some weird
setups in Docker. Fixes #971
2019-07-25 09:39:44 -04:00
Eelco Dolstra 38a4d38bc3
Merge pull request #2746 from bjornfor/install-multi-user-defaults
install-multi-user: reduce max-jobs from 32 to 1
2019-06-17 10:17:40 +02:00
Johannes Climacus a8251ba2ed Replace type with command -v in install script
In POSIX sh, `type` is undefined.

cf. https://pubs.opengroup.org/onlinepubs/9699919799/utilities/command.html#tag_20_22_04
2019-05-29 10:08:21 -04:00
Matthew Bauer 92f461e4f4 Don’t set NIX_REMOTE=daemon in daemon profile
This is now autodetected. There is no need to put it in the profile.
2019-05-15 22:24:24 -04:00
Matthew Bauer 7c20ee448f Sync NIX_PROFILES between single-user and multi-user modes
When we are in single user mode, we still want to have access to
profiles. This way things in Nixpkgs that rely on them getting set
accurately are done in both cases. The point where I hit this is with
using aspell which looks in NIX_PROFILES:

https://github.com/NixOS/nixpkgs/blob/master/pkgs/development/libraries/aspell/default.nix

Before this patch, NIX_PROFILES was never set in single user mode!
This corrects that.
2019-05-15 22:04:39 -04:00
Eelco Dolstra b6eb8a2d7e
nix-profile: Add all channels to $NIX_PATH
Fixes #2709.
2019-05-15 14:30:09 +02:00
Eelco Dolstra 3fd5425f94
Fix shellcheck error
https://hydra.nixos.org/build/93359951
2019-05-15 13:13:14 +02:00
Graham Christensen 5713772568
Merge pull request #2594 from LnL7/darwin-10.12.6
installer: update macOS version check to 10.12.2
2019-05-08 07:16:06 -04:00
Eelco Dolstra 989cb37777
Merge pull request #2679 from bjornfor/offline-install
install script: don't abort when "nix-channel --update" fails
2019-05-01 15:48:39 +02:00
Bjørn Forsman 07d9981f34 install-multi-user: remove unneeded settings from nix.conf
Hardcoding the "max-jobs" and "cores" settings in nix.conf at install
time, to the same value as Nix' built-in default, makes little sense to
me.
2019-03-27 16:26:14 +01:00
Bjørn Forsman dbe4c043d7 install-multi-user: reduce max-jobs from 32 to 1
Having max-jobs = 32 ($NIX_USER_COUNT is hardcoded to that value) may
severely overload the machine. The nix.conf(5) manual page says max-jobs
defaults to 1, so let's use that value.

NOTE: Both max-jobs and cores are now being set to their default value,
so they can be removed alltogether.
2019-03-27 16:23:35 +01:00
Samuel Dionne-Riel d854e7dfd6 install-multi-user: Detect and fail lack of systemd separately
Otherwise, the user is shown:

```
Sorry, I don't know what to do on Linux
```

Which is... not exactly right.
2019-03-26 21:08:22 -04:00
Domen Kožar 6f0359012c
Merge pull request #2693 from thoughtpolice/scripts/multi-user-sandbox
scripts: remove default 'sandbox = false' from multi-user installer
2019-03-24 19:45:56 +07:00
Austin Seipp d7a7a029ff
scripts: remove default 'sandbox = false' from multi-user installer
Sandboxing is now enabled by default on Linux, but is still disabled on
macOS. However, the installer always turned it off to ensure consistent
behavior.

Remove this default configuration, so we fall back to the default
platform-specific value.

Signed-off-by: Austin Seipp <aseipp@pobox.com>
2019-02-23 08:35:26 -06:00
Jonas Chevalier b402148d8f
remove noop uses of nix-store --init
the nix-store --init command is a noop apparently
2019-02-22 21:07:53 +01:00
Bjørn Forsman b9567aa8b6 install script: don't abort when "nix-channel --update" fails
Instead, print a message about what happened and tell the user what can
be done (run "[sudo -i] nix-channel --update nixpkgs" again at a later
time). This change allows installing Nix when you're offline.

Since the multi-user installer is so verbose, the message isn't printed
until the end.

Fixes issue #2650 ("installation without internet connection").
2019-02-20 09:35:01 +01:00
Shea Levy e58a71442a
nix.sh: Be set -u compliant. 2019-02-14 13:24:16 -05:00
Daiderd Jordan 82f054d7d5
installer: update macOS version check to 10.12.2
Nixpkgs will drop support for <10.12 soon and thus a nix release built
using the 19.03 channel will also require a newer version of macOS.
2018-12-20 20:12:20 +01:00
Eelco Dolstra 32a0a223d5
Merge pull request #2432 from luke-clifton/fixssl
SSL certificate search failed to find user profile certificates.
2018-11-15 13:07:43 +01:00
Graham Christensen (Target) ea41838ae0
install script: remove unportable command check, fixup errant escape
`which` isn't necessarily portable, but `command -v` is an equivalent form.

Additionally, the `\'` is not necessary, as it is already quoted by `"`.
2018-10-16 10:22:36 -04:00
Matthew Bauer 9cc876fb11
nix-profile-daemon: remove cruft
This removes part of the PATH that were being added automatically in multi-user installs:

- $HOME/.nix-profile/lib/kde4/libexec - shouldn't be needed anymore, we are now using kde5
- @localstatedir@/nix/profiles/default/lib/kde4/libexec - same as above
- @localstatedir@/nix/profiles/default - shouldn't ever contain binaries
2018-10-01 13:26:59 -05:00
Luke Clifton fb72104b80 Search NIX_PROFILE for SSL CA 2018-09-20 07:33:35 +08:00
Luke Clifton 1241a58975 Look inside the user profile 2018-09-19 15:22:39 +08:00
Graham Christensen 51f9682a8b
Default to single-user install 2018-09-01 10:45:56 -04:00
Eelco Dolstra 7c3c635d4f
release.nix: Generate the installer script 2018-05-30 17:40:08 +02:00