For a long time `nix repl` has supported displaying documentation set on
builtins, however, it has long been convention to use Markdown comments
on Nix functions themselves for documentation. This exposes that
information to `nix repl` users in a nice and formatted way.
NixOS/rfcs#145 doc-comments are primarily what this feature is intended
to consume, however, support for lambda documentation in the repl is
experimental. We do our best effort to support the RFC here.
These changes are based on [the nix-doc library](https://github.com/lf-/nix-doc) and
are licensed under the terms described in the relevant source files.
Change-Id: Ic6fe947d39a22540705d890737e336c4720b0a22
setting this only on exceptions caused by actual fd access is not
sufficient to diagnose all errors (such as SerialisationError) in
some cases. this usually does not have any negative effects since
those errors will end up killing the process in another way. this
is not a reliable assumption though and we should be using proper
error handling (and closing connections more often, preferring to
close over keeping something open that might be in a weird state)
Change-Id: I1b792cd7ad8ba9ff0f6bd174945ab2575ff2208e
not needed yet, but returning a resource from the exception handling
path that has ownership of a handle is currently not well-supported.
we could also add a default constructor to Handle, but then we would
also need to change the pool reference to a pointer. eventually that
should be done since now resources can be swapped between pools with
clever moves, but since that's not a problem yet we won't do it now.
Change-Id: I26eb06581f7be34569e9e67a33da736128d167af
the duplication of exception handling was added without justification,
so we can only assume that it was done like this because Finally could
not throw exceptions safely. since this has now been rectified we will
deduplicate this handler code again.
Change-Id: I40721f3378c0fd9f34e2914a16d383f6e2713b40
this is supposed to act like a finally block does in other languages. a
finally block should be able to throw exceptions of its own rather than
just crashing the entire program when it throws it own exceptions. even
in the rare case of a finally throwing an unexpected exception it might
be better to report the exception from Finally instead of the original,
at least that can keep our program running instead of letting it crash.
Change-Id: Id42011e46b1df369152b4564938c0e93fa1acf32
usage of this flag previously kept connections open much longer than
necessary, and at the same time obscured that a connection was being
dropped when it *was* set. new variable names clarify this somewhat.
Change-Id: I11f6f08f37a5e4dc04ea6c6036ea589154b121c6
it was used incorrectly (not swapped on handle move), only used in one
place (that is now handled with exception handling detection in Handle
itself), and if ever reintroduced should be replaced with a different,
more understandable mechanism (like an explicit dropAsInvalid method).
Change-Id: Ie3e5d5cfa81d335429cb2ee5c3ad85c74a9df17b
this was never actually used, and bad design in the first place—why
should a bad resource be put back into the idle pool? just drop it.
Change-Id: Idab8774bee19dadae0209d404c4fb86dd4aeba1e
if a scope owning a resource does not gracefully drop that resource
while handling exceptions from deeper down the call stack we should
assume the resource is invalid state and drop it. currently it *is*
true that such cases do not cause resources to be freed, but thanks
to validator misuses this has so far not caused any larger problem.
Change-Id: Ie4f91bcd60a64d05c5ff9d22cc97954816d13b97
The big ones here are `trim-trailing-whitespace` and `end-of-file-fixer`
(which makes sure that every file ends with exactly one newline
character).
Change-Id: Idca73b640883188f068f9903e013cf0d82aa1123
This does involve making a large number of destructors able to throw,
because we had to change it high in the class hierarchy. Oh well.
Change-Id: Ib62d3d6895b755f20322bb8acc9bf43daf0174b2
* some things that can throw are marked noexcept
yet the linter seems to think not. Maybe they can't throw in practice.
I would rather not have the UB possibility in pretty obvious cold
paths.
* various default-case-missing complaints
* a fair pile of casts from integer to character, which are in fact
deliberate.
* an instance of <https://clang.llvm.org/extra/clang-tidy/checks/bugprone/move-forwarding-reference.html>
* bugprone-not-null-terminated-result on handing a string to curl in
chunks of bytes. our usage is fine.
* reassigning a unique_ptr by CRIMES instead of using release(), then
using release() and ignoring the result. wild. let's use release() for
its intended purpose.
Change-Id: Ic3e7affef12383576213a8a7c8145c27e662513d
We got confused what formals did and had to briefly figure it out. We
should just have docs, so these are some.
Change-Id: If3e794a401e69d022785cbfa0b0c2e2284f41f58
the autoconf build system defaults to /nix/var, not /nix/var/nix. the
latter is only used in libstore, so we'll move the extra segment there.
Change-Id: Idfbc988ee302355982abdcd51d6d7b5d5d661c0d
Without this, the Meson setup won't bail out if nlohmann_json is
missing, leading to subpar DX (and maybe worse, but I'm not entirely
sure).
Change-Id: I5913111060226b540dcf003257c99a08e84da0de
one headers (args/root.hh) was simply missing, and the generated headers
were not installed. not all of them *should* be installed either, only a
select few (and sadly this needs a custom target for each one, it seems)
Change-Id: I37b25517895d0e5e521abc1202fa65624de57ed1
We don't apply any patches to it, and vendoring it locks users into
bugs (it hasn't been updated since its introduction in late 2021).
Closes #164
Change-Id: Ied071c841fc30b0dfb575151afd1e7f66970fdb9
Functional tests can be run with
`meson test -C build --suite installcheck`.
Notably, functional tests must be run *after* running `meson install`
(Lix's derivation runs the installcheck suite in installCheckPhase so it
does this correctly), due to some quirks between Meson and the testing
system.
As far as I can tell the functional tests are meant to be run after
installing anyway, but unfortunately I can't transparently make
`meson test --suite installcheck` depend on the install targets.
The script that runs the functional tests, meson/run-test.py, checks
that `meson install` has happened and fails fast with a (hopefully)
helpful error message if any of the functional tests are run before
installing.
TODO: this change needs reflection in developer documentation
Change-Id: I8dcb5fdfc0b6cb17580973d24ad930abd57018f6
This was achieved by running maintainers/buildtime_report.sh on the
build directory of a meson build, then asking "why the heck is json
eating our build times", and strategically moving the json using bits
out of widely included headers.
It turns out that putting literally any metrics whatsoever into the
build had immediate and predictable results.
Results are 1382.5s frontend time -> 1175.4s frontend time, back end
time approximately invariant.
Related: #159
Change-Id: I7edea95c8536203325c8bb4dae5f32d727a21b2d
Once this commit lands, we are even more visible in analytics FWIW.
Change-Id: Id7e0c162315d0f191edbea9cb5fb82ce363704b9
Signed-off-by: Raito Bezarius <raito@lix.systems>
HintFmt(string) invokes the HintFmt("%s", literal) constructor,
which is not what we want here. Add a constructor with a proper name
and call that.
Next step: rename all the other ones to HintFmt::literal(string).
Fixes: #178
Change-Id: If52d2eb8864ceb8663e05992e9d1fffef573d6b8
Committing a lock file using markFileChanged() required the input to
be writable by the caller in the local filesystem (using the path
returned by getSourcePath()). putFile() abstracts over this.
(cherry picked from commit 95d657c8b3ae4282e24628ba7426edb90c8f3942)
Change-Id: Ie081c5d9eb4e923b229191c5e23ece85145557ff
As I complained in
https://github.com/NixOS/nix/pull/6784#issuecomment-1421777030 (a
comment on the wrong PR, sorry again!), #6693 introduced a second
completions mechanism to fix a bug. Having two completion mechanisms
isn't so nice.
As @thufschmitt also pointed out, it was a bummer to go from `FlakeRef`
to `std::string` when collecting flake refs. Now it is `FlakeRefs`
again.
The underlying issue that sought to work around was that completion of
arguments not at the end can still benefit from the information from
latter arguments.
To fix this better, we rip out that change and simply defer all
completion processing until after all the (regular, already-complete)
arguments have been passed.
In addition, I noticed the original completion logic used some global
variables. I do not like global variables, because even if they save
lines of code, they also obfuscate the architecture of the code.
I got rid of them moved them to a new `RootArgs` class, which now has
`parseCmdline` instead of `Args`. The idea is that we have many argument
parsers from subcommands and what-not, but only one root args that owns
the other per actual parsing invocation. The state that was global is
now part of the root args instead.
This did, admittedly, add a bunch of new code. And I do feel bad about
that. So I went and added a lot of API docs to try to at least make the
current state of things clear to the next person.
--
This is needed for RFC 134 (tracking issue #7868). It was very hard to
modularize `Installable` parsing when there were two completion
arguments. I wouldn't go as far as to say it is *easy* now, but at least
it is less hard (and the completions test finally passed).
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Change-Id: If18cd5be78da4a70635e3fdcac6326dbfeea71a5
(cherry picked from commit 67eb37c1d0de28160cd25376e51d1ec1b1c8305b)
An attrPath prefix of "." indicates no need to try default attrPath prefixes. For example `nixpkgs#legacyPackages.x86_64-linux.ERROR` searches through
```
trying flake output attribute 'packages.x86_64-linux.legacyPackages.x86_64-linux.ERROR'
using cached attrset attribute ''
trying flake output attribute 'legacyPackages.x86_64-linux.legacyPackages.x86_64-linux.ERROR'
using cached attrset attribute 'legacyPackages.x86_64-linux'
trying flake output attribute 'legacyPackages.x86_64-linux.ERROR'
using cached attrset attribute 'legacyPackages.x86_64-linux'
```
And there is no way to specify that one does not want the automatic
search behavior. Now one can specify
`nixpkgs#.legacyPackages.x86_64-linux.ERROR` to only refer to the rooted
attribute path without any default injection of attribute search path or
system.
Change-Id: Iac1334e1470137b7ce11dcf845513810230638ec
(cherry picked from commit d4aed18883b361133607296fb6cd789c47427a38)
Rebecca Turner
Lunaphied
Ilya K
eldritch horrors
jade
Jade Lovelace
Winter Cute
raito
Qyriad