Commit graph

396 commits

Author SHA1 Message Date
Eelco Dolstra c6ff33ff5c
RunPager: Stop the progress bar
In particular, the progress bar was interfering with 'less' rendering
in '--help' (e.g. run 'nix --help' and hit '/' to search).
2022-09-13 15:29:13 +02:00
Matthew Bauer 77d3d3d18d Remove some signals 2022-09-06 09:47:53 -05:00
Matthew Bauer a47b5476e1 Add more signals 2022-09-03 16:06:33 -05:00
Matthew Bauer 102434e4cb Disable SA_RESTART for some signals on macOS
Disables the SA_RESTART behavior on macOS which causes:

> Restarting of pending calls is requested by setting the SA_RESTART bit
> in sa_flags. The affected system calls include read(2), write(2),
> sendto(2), recvfrom(2), sendmsg(2) and recvmsg(2) on a communications
> channel or a slow device (such as a terminal, but not a regular file)
> and during a wait(2) or ioctl(2).

From: https://man.openbsd.org/sigaction#SA_RESTART

This being set on macOS caused a bug where read() calls to the daemon
socket were blocking after a SIGINT was received. As a result,
checkInterrupt was never reached even though the signal was received
by the signal handler thread.

On Linux, SA_RESTART is disabled by default. This probably effects
other BSDs but I don’t have the ability to test it there right now.
2022-09-03 00:27:16 -05:00
Eelco Dolstra bb411e4ae1 Fix progress bar flicker with -L
This was caused by -L calling setLogFormat() again, which caused the
creation of a new progress bar without destroying the old one. So we
had two progress bars clobbering each other.

We should change 'logger' to be a smart pointer, but I'll do that in a
future PR.

Fixes #6931.
2022-08-24 22:36:40 +02:00
Eelco Dolstra c3769c6846 ProgressBar: Delay before showing a new activity
Some activities are numerous but usually very short (e.g. copying a
source file to the store) which would cause a lot of flickering. So
only show activities that have been running for at least 10 ms.
2022-08-17 11:31:44 +02:00
John Ericson 75b62e5260 Avoid fmt when constructor already does it
There is a correctnes issue here, but #3724 will fix that. This is just
a cleanup for brevity's sake.
2022-04-19 01:44:11 +00:00
John Ericson 6636202356 Factor out a GcStore interface
Starts progress on #5729.

The idea is that we should not have these default methods throwing
"unimplemented". This is a small step in that direction.

I kept `addTempRoot` because it is a no-op, rather than failure. Also,
as a practical matter, it is called all over the place, while doing
other tasks, so the downcasting would be annoying.

Maybe in the future I could move the "real" `addTempRoot` to `GcStore`,
and the existing usecases use a `tryAddTempRoot` wrapper to downcast or
do nothing, but I wasn't sure whether that was a good idea so with a
bias to less churn I didn't do it yet.
2022-03-03 19:01:25 +00:00
Eelco Dolstra 010ffc31f8 Remove stray debug line 2022-03-02 11:20:32 +01:00
Eelco Dolstra df552ff53e Remove std::string alias (for real this time)
Also use std::string_view in a few more places.
2022-02-25 16:13:02 +01:00
Eelco Dolstra e2e5f3a78f Respect /etc/hosts
https://hydra.nixos.org/build/161439329
2021-12-13 19:37:30 +01:00
Alexander Bantyev 0a2fa2d684
RunPager: restore stdout upon pager exit
Before this change, stdout was closed after the pager exits. This is
fine for non-interactive commands where we want to exit right after
the pager exits anyways, but for interactive things (e.g. nix repl)
this breaks the output after we quit the pager.

Keep the initial stdout fd as part of RunPager, and restore it in
RunPager::~RunPager using dup2.
2021-12-06 16:51:55 +03:00
Théophane Hufschmitt f3f32f0c30
Merge pull request #5599 from fzakaria/faridzakaria/fix-progress-bar-leak
Fix heap use after free in progress-bar.cc
2021-12-01 16:28:38 +01:00
Eelco Dolstra 5fcf7f04a9
Merge pull request #5384 from baloo/baloo/dns-timeout
preloadNSS / dns timeout
2021-11-25 17:37:53 +01:00
Farid Zakaria d41af23a6c Fix heap use after free in progress-bar.cc
Fix some heap-use-after-free in progress-bar.cc

These are somewhat tricky failures here due to temporary variable
creation and string_view
2021-11-23 08:34:55 -08:00
Eelco Dolstra ff2af4d64e Unshare mount namespace in main()
Doing it as a side-effect of calling LocalStore::makeStoreWritable()
is very ugly.

Also, make sure that stopping the progress bar joins the update
thread, otherwise that thread should be unshared as well.
2021-11-08 22:00:45 +01:00
Arthur Gautier fa4abe46e2 preloadNSS: document the preload mechanism
Signed-off-by: Arthur Gautier <baloo@superbaloo.net>
2021-10-16 02:55:25 +00:00
Arthur Gautier c345a4a1e8 fixup macos build
Signed-off-by: Arthur Gautier <baloo@superbaloo.net>
2021-10-15 07:34:01 +00:00
Arthur Gautier ca8989daf3 preloadNSS: warn if unable to open nss backend
Signed-off-by: Arthur Gautier <baloo@superbaloo.net>
2021-10-15 02:59:00 +00:00
Arthur Gautier 85717eff15 preloadNSS: detect glibc
Signed-off-by: Arthur Gautier <baloo@superbaloo.net>
2021-10-15 02:59:00 +00:00
Arthur Gautier d1da45855c preloadNSS: Drop the dns query workaround
We can actually just load nss ourselves and call in nss to configure it
and we don't need to run a dummy query entirely to have nss load nss_dns
as a side-effect.

Signed-off-by: Arthur Gautier <baloo@superbaloo.net>
2021-10-15 02:58:18 +00:00
Eelco Dolstra 1e43bc6dc0
Merge pull request #5224 from baloo/baloo/5089/force-nss_dns-load
preloadNSS: fixup nss_dns load
2021-09-09 10:37:41 +02:00
Arthur Gautier 3b72741f23 preloadNSS: load NSS before threads are started
preloadNSS is not thread-safe, this commit moves it before we start the
first thread.

Signed-off-by: Arthur Gautier <baloo@superbaloo.net>
2021-09-08 18:29:31 +00:00
Eelco Dolstra eda0fee160
Merge pull request #5175 from Pamplemousse/make
Don't overwrite user provided `lib*_LDFLAGS`
2021-08-30 12:44:29 +02:00
Pamplemousse a4c6d319a8 Don't overwrite user provided lib*_LDFLAGS
Signed-off-by: Pamplemousse <xav.maso@gmail.com>
2021-08-25 08:59:19 -07:00
Piotr Szubiakowski 9f13cb31e8
Install pkg-config files in the correct location
Use `$(libdir)` while installing .pc files looks like a more generic
solution. For example, it will work for distributions like RHEL or
Fedora where .pc files are installed in `/usr/lib64/pkgconfig`.
2021-08-13 21:08:58 +00:00
Naïm Favier cefa8b673f
Fix --no-gc-warning
Broken by 8e758d402b
2021-07-25 16:06:55 +02:00
Yestin L. Harrison 20cce079f2 Respect TERM=dumb more consistently 2021-07-01 18:19:01 -06:00
Eelco Dolstra 9b9e703df4 restoreSignals() + restoreAffinity() -> restoreProcessContext() 2021-04-07 13:10:02 +02:00
John Ericson d8fa7517fa buildable.{cc,hh} -> derived-path.{cc,hh} 2021-04-05 10:33:28 -04:00
John Ericson 9b805d36ac Rename Buildable 2021-04-05 09:52:25 -04:00
John Ericson 255d145ba7 Use BuildableReq for buildPaths and ensurePath
This avoids an ambiguity where the `StorePathWithOutputs { drvPath, {}
}` could mean "build `brvPath`" or "substitute `drvPath`" depending on
context.

It also brings the internals closer in line to the new CLI, by
generalizing the `Buildable` type is used there and makes that
distinction already.

In doing so, relegate `StorePathWithOutputs` to being a type just for
backwards compatibility (CLI and RPC).
2021-04-05 08:33:00 -04:00
Eelco Dolstra 3e0e443181 ProgressBar: Respect verbosity level
This makes its behaviour consistent with SimpleLogger.
2021-03-19 17:56:39 +01:00
Shea Levy 98d1b64400
Initialize plugins after handling initial command line flags
This is technically a breaking change, since attempting to set plugin
files after the first non-flag argument will now throw an error. This
is acceptable given the relative lack of stability in a plugin
interface and the need to tie the knot somewhere once plugins can
actually define new subcommands.
2021-02-24 08:22:17 -05:00
Eelco Dolstra 8e758d402b Remove mkFlag() 2021-01-27 12:06:03 +01:00
Eelco Dolstra 36c4d6f592 Group common options 2021-01-25 19:03:13 +01:00
Eelco Dolstra 3da9a9241c Convert option descriptions to Markdown 2021-01-13 14:18:04 +01:00
Eelco Dolstra 17beae299d Support binary unit prefixes in command line arguments 2021-01-08 12:51:19 +01:00
Eelco Dolstra 6548b89cc4 string2Int(): Return std::optional 2021-01-08 12:22:21 +01:00
Eelco Dolstra 1d4954e73e Remove mkFlag integer specialisation 2021-01-08 11:40:36 +01:00
Eelco Dolstra 0df69d96e0 Make sodium a required dependency 2021-01-06 17:56:53 +01:00
Eelco Dolstra 146af4ee9b Move sodium_init() call 2021-01-06 16:43:09 +01:00
Eelco Dolstra 0287f83057 Ask for confirmation before allowing flake Nix configuration settings 2020-11-26 12:37:23 +01:00
Eelco Dolstra 7f56cf67ba Fix assertion failure in tab completion for --option 2020-10-29 18:26:35 +01:00
Matthew Kenigsberg 6a4bf535d8 Capitalize JSON for consistency 2020-10-28 17:54:28 -05:00
regnat 04e5d0e704 Add a description in the completion outputs
Make nix output completions in the form `completion\tdescription`.
This can't be used by bash (afaik), but other shells like zsh or fish
can display it along the completion choices
2020-10-09 09:39:51 +02:00
Eelco Dolstra 6691256e79 Factor out common showBytes() 2020-10-06 10:40:49 +02:00
Maximilian Bosch a76fb07314
libmain/progress-bar: don't trim whitespace on the left
When running `nix build -L` it can be fairly hard to read the output if
the build program intentionally renders whitespace on the left. A
typical example is `g++` displaying compilation errors.

With this patch, the whitespace on the left is retained to make the log
more readable:

```
foo> no configure script, doing nothing
foo> building
foo> foobar.cc: In function 'int main()':
foo> foobar.cc:5:5: error: 'wrong_func' was not declared in this scope
foo>     5 |     wrong_func(1);
foo>       |     ^~~~~~~~~~
error: --- Error ------------------------------------------------------------------------------------- nix
error: --- Error --- nix-daemon
builder for '/nix/store/i1q76cw6cyh91raaqg5p5isd1l2x6rx2-foo-1.0.drv' failed with exit code 1
```
2020-09-26 17:38:11 +02:00
Eelco Dolstra 34b22e0123
Change option descriptions to Markdown 2020-08-19 14:21:27 +02:00
Eelco Dolstra 7cdc739ece
Merge remote-tracking branch 'origin/master' into markdown 2020-08-17 13:43:39 +02:00
Maximilian Bosch 5f8ae16c8b
Always reset ANSI colors in progress-bar line
When having a message like `waiting for a machine to build X` and
building with `nix build -L`, the log-prefix is always colored yellow[1]
on a small terminal-width as everything (including the ANSI color-reset) is
stripped away.

To work around that problem, this patch explicitly adds an `ANSI_NORMAL`
to the end of the line.

[1] https://imgur.com/a/FjtJOk3
2020-08-10 17:44:17 +02:00
Eelco Dolstra bf290c2306
Merge remote-tracking branch 'origin/master' into markdown 2020-07-31 16:07:04 +02:00
Eelco Dolstra 3f6e88a552 unsigned long long -> uint64_t 2020-07-30 13:34:04 +02:00
Eelco Dolstra a71d1cedff
printVersion(): Show system types 2020-07-24 11:34:01 +02:00
Eelco Dolstra 54712aaf8a Merge remote-tracking branch 'origin/master' into flakes 2020-07-06 16:40:10 +02:00
Ben Burdette bf2788e4c1 move showTrace to new loggerSettings 2020-07-02 09:04:31 -06:00
Ben Burdette 9159dfe3d8 comments and cleanup 2020-06-30 16:31:55 -06:00
Ben Burdette 8f81fae116 showTrace flag in loggers 2020-06-29 10:20:51 -06:00
Eelco Dolstra ca946860ce Fix bash completion 2020-06-29 14:37:22 +02:00
Eelco Dolstra adf2fbbdc2 Merge remote-tracking branch 'origin/master' into flakes 2020-06-26 08:46:46 +02:00
Ben Burdette 9ab808c926 showTrace flag for ErrorInfo; showTrace test. 2020-06-25 09:23:12 -06:00
Ben Burdette 6359d71d6b re-enable --show-trace check 2020-06-24 18:28:20 -06:00
Ben Burdette 54e8f550c9 addErrorTrace 2020-06-19 13:44:08 -06:00
Joe Hermaszewski da8aac6ce8 Mention number of derivations to be build/fetched in output
Also correct grammar for the case of a single derivation.
2020-06-17 20:27:27 +08:00
Eelco Dolstra 1524752c17 Merge remote-tracking branch 'origin/master' into flakes 2020-06-17 10:26:52 +02:00
Eelco Dolstra 24a3208247 Include only the base name of the program in error messages 2020-06-15 19:35:31 +02:00
Eelco Dolstra 4e995bc8a6 Always hide the progress bar on exit 2020-06-15 18:01:05 +02:00
Eelco Dolstra 5ed5d7acbd Improve "waiting for locks" messages
These are now shown in the progress bar.

Closes #3577.
2020-06-15 16:03:29 +02:00
Eelco Dolstra e14e62fddd Remove trailing whitespace 2020-06-15 14:12:39 +02:00
Ben Burdette ef1b3f21b6 Merge remote-tracking branch 'upstream/master' into errors-phase-2 2020-06-11 14:06:35 -06:00
Eelco Dolstra 95eb064062 Shut up warning 2020-06-11 15:39:30 +02:00
Eelco Dolstra 8bd892117a Style fixes 2020-06-11 15:39:08 +02:00
regnat 801112de1a Move progress-bar.cc to libmain
Needed so that we can include it as a logger in loggers.cc without
adding a dependency on nix

This also requires moving names.hh to libutil to prevent a circular
dependency between libmain and libexpr
2020-06-08 17:16:52 +02:00
Eelco Dolstra c27f92698b Style fixes 2020-06-08 13:24:01 +02:00
regnat 4983401440 Unify the printing of the logs between bar-with-logs and raw
Make the printing of the build logs systematically go through the
logger, and replicate the behavior of `no-build-output` by having two
different loggers (one that prints the build logs and one that doesn't)
2020-06-08 09:31:15 +02:00
regnat 170e86dff5 Make the logger customisable
Add a new `--log-format` cli argument to change the format of the logs.
The possible values are
- raw (the default one for old-style commands)
- bar (the default one for new-style commands)
- bar-with-logs (equivalent to `--print-build-logs`)
- internal-json (the internal machine-readable json format)
2020-06-08 09:31:15 +02:00
Ben Burdette b93c1bf3d6 fixes to merged code 2020-05-11 15:52:15 -06:00
Ben Burdette 59b1f5c701 Merge branch 'master' into errors-phase-2 2020-05-11 14:35:30 -06:00
Eelco Dolstra 0884f180f5 Simplify 2020-05-10 21:50:32 +02:00
Eelco Dolstra 91ddee6bf0 nix: Implement basic bash completion 2020-05-10 20:32:21 +02:00
Eelco Dolstra a721a0b114 Flag: Use designated initializers 2020-05-04 22:40:19 +02:00
Ben Burdette 9c5ece44a7 separate msgs instead of appending to what() 2020-05-04 13:46:15 -06:00
Ben Burdette ab6f0b9641 convert some printError calls to logError 2020-05-03 08:01:25 -06:00
Ben Burdette d8d4844b88 all things error to error.hh 2020-04-24 14:57:51 -06:00
Ben Burdette e4fb9a3849 remove 'format' from Error constructor calls 2020-04-21 17:07:07 -06:00
Eelco Dolstra a118293bd0
Merge pull request #3458 from zimbatm/nix-user-conf-dir
NIX_USER_CONF_FILES
2020-04-15 13:00:28 +02:00
Jonas Chevalier 895516cadf
add NIX_USER_CONF_FILES
Motivation: maintain project-level configuration files.

Document the whole situation a bit better so that it corresponds to the
implementation, and add NIX_USER_CONF_FILES that allows overriding
which user files Nix will load during startup.
2020-04-14 18:45:06 +02:00
Daiderd Jordan 4d9db420ff
never use /var/folders for TMPDIR on darwin
This doesn't just cause problems for nix-store --serve but also results
in certain build failures. Builds that use unix domain sockets in their
tests often fail because the /var/folders prefix already consumes more
than half of the maximum length of socket paths.

    struct sockaddr_un {
       sa_family_t sun_family;               /* AF_UNIX */
       char        sun_path[108];            /* Pathname */
    };
2020-04-12 09:57:22 +02:00
Eelco Dolstra e322a16523 Remove global -I flags
(cherry picked from commit 2c692a3b14)
2020-03-30 15:30:19 +02:00
Eelco Dolstra bbe97dff8b Make the Store API more type-safe
Most functions now take a StorePath argument rather than a Path (which
is just an alias for std::string). The StorePath constructor ensures
that the path is syntactically correct (i.e. it looks like
<store-dir>/<base32-hash>-<name>). Similarly, functions like
buildPaths() now take a StorePathWithOutputs, rather than abusing Path
by adding a '!<outputs>' suffix.

Note that the StorePath type is implemented in Rust. This involves
some hackery to allow Rust values to be used directly in C++, via a
helper type whose destructor calls the Rust type's drop()
function. The main issue is the dynamic nature of C++ move semantics:
after we have moved a Rust value, we should not call the drop function
on the original value. So when we move a value, we set the original
value to bitwise zero, and the destructor only calls drop() if the
value is not bitwise zero. This should be sufficient for most types.

Also lots of minor cleanups to the C++ API to make it more modern
(e.g. using std::optional and std::string_view in some places).
2019-12-10 22:06:05 +01:00
Eelco Dolstra abb8ef619b
Fix macOS build
https://hydra.nixos.org/build/107457009
2019-11-26 21:08:56 +01:00
Eelco Dolstra a56b51a0ba
Disable OpenSSL lock callback on OpenSSL >= 1.1.1 2019-09-04 21:45:01 +02:00
Eelco Dolstra 7ef2645f45
Merge pull request #2921 from matthewbauer/handle-sigwinch
Handle SIGWINCH in main thread
2019-08-28 21:48:14 +02:00
Eelco Dolstra 09dde33c19
Automatically use --no-net if there are no network interfaces
(cherry picked from commit 04a5976996)
2019-06-25 12:45:59 +02:00
Eelco Dolstra 7b9c68766d
Add '--no-net' convenience flag
This flag

* Disables substituters.

* Sets the tarball-ttl to infinity (ensuring e.g. that the flake
  registry and any downloaded flakes are considered current).

* Disables retrying downloads and sets the connection timeout to the
  minimum. (So it doesn't completely disable downloads at the moment.)

(cherry picked from commit 8ea842260b)
2019-06-24 22:07:29 +02:00
Eelco Dolstra 34fa8ce917
nix: Support -j flag 2019-06-15 16:34:06 +02:00
Matthew Bauer 5011a52cf3 Just enable hack on macOS
This is not needed on linux at all! Tried to explain as much as I
understand with the problem.
2019-06-05 20:20:50 -04:00
Matthew Bauer 4a3e96281d Handle SIGWINCH in main thread
For the SIGWINCH signal to be caught, it needs to be set in sigaction
on the main thread. Previously, this was broken, and updateWindowSize
was never being called. Tested on macOS 10.14.
2019-06-05 00:40:45 -04:00
Eelco Dolstra 1f64f4c7c8
pkg-config files: Use c++17 2019-03-14 14:11:12 +01:00
John Ericson fef9f5653b Remove mentions of libformat, it no longer exists 2019-01-05 14:31:29 -05:00