This was a combination of two problems: the python didn't throw an error
because apparently glob on a nonexistent directory doesn't crash, and
secondarily, bash ignores bad exit codes without `set -e` if they are
not in the final/only command.
Change-Id: I812bde7a4daee5c77ffe9d7c73a25fd14969f548
Use the correct directory for the rl-next build, so that the release notes
actually get built and the page doesn't end up empty. I don't know why the
exception didn't cause a build failure before.
Fixes: #297
Change-Id: Ic72b9bb4c0d2d1f633f2af90cce4a3a2796d7f9b
This doesn't comprehensively fix everything outdated in the manual, or
make the manual greatly better, but it does note down where at least
jade noticed it was wrong, and it does fix all the instances of
referencing Nix to conform to the style guide to the best of our
ability.
A lot of things have been commented out for being wrong, and there are
three types of FIXME introduced:
- FIXME(Lix): generically Lix needs to fix it
- FIXME(Qyriad): re #215
- FIXME(meson): docs got outdated by meson changes and need rewriting
I did fix a bunch of it that I could, but there could certainly be
mistakes and this is definitely just an incremental improvement.
Fixes: #266
Change-Id: I5993c4603d7f026a887089fce77db08394362135
mdbook has the unfortunate habit of creating stub files for chapters it
can't find on disk. turn off this helpful feature as it masks errors in
the summary file, and fix a recently introduced instance of this error.
Change-Id: I10d86aac0489c9c494bd5c8a50047415f4d4b18d
Part of #7672
My main motivation is to be able to use `nix.checkConfig`[1]. This
doesn't work with Lix currently since the module uses `nix show-config`
if the Nix version is <2.20pre and `nix config show` otherwise. I think
this is the only instance where nixpkgs checks for which Nix commands
exist that affects us now, so I figured we could just perform the rename
here as well[2] and still provide the current version number[3].
I don't have a strong opinion on whether to deprecate `nix show-config`,
the warning is added there automatically.
(cherry picked from commit f300e11b056dea414d7d77bbc6e5a7dc5d9ddd41)
[1] https://nixos.org/manual/nixos/stable/options.html#opt-nix.checkConfig
[2] I should add that I don't use the "official" ways of installing Lix
because using the flake directly and callPackaging it seemed to fit
better into my workflow: I already have a little mess to make
sure Hydra from the flake uses the correct pkgs.nix and I didn't
want to complicate it further while keeping a single package-set I
can build in CI. Don't get me wrong, I think such a module for a
quick-start is very important, just giving context on why I bother
in the first place :)
[3] When we go public, I think it's worth considering to add support in
nixpkgs itself for Lix.
Change-Id: I47b4239b05cbeda3c370d2fa56ea768b768768ac
This should have been there from the beginning. As much as nix-env is a
pile of problems we don't need trivial docs papercuts like this adding
to it.
Change-Id: I0c53e4b146af2fefdd0e4743d850672729cb2194
This commit makes Meson the default buildsystem for Lix.
The Make buildsystem is now deprecated and will be removed soon, but has
not yet, which will be done in a later commit when all seems good. The
mesonBuild jobs have been removed, and have not been replaced with
equivalent jobs to ensure the Make buildsystem still works.
The full, new commands in a development shell are:
$ meson setup ./build "--prefix=$out" $mesonFlags
(A simple `meson setup ./build` will also build, but will do a different
thing, not having the settings from package.nix applied.)
$ meson compile -C build
$ meson test -C build --suite=check
$ meson install -C build
$ meson test -C build --suite=installcheck
(Check and installcheck may both be done after install, allowing you to
omit the --suite argument entirely, but this is the order package.nix
runs them in.)
If tests fail and Meson helpfully has no output for why, use the
`--print-error-logs` option to `meson test`. Why this is not the default
I cannot explain.
If you change a setting in the buildsystem, most cases will
automatically regenerate the Meson configuration, but some cases, like
trying to build a specific target whose name is new to the buildsystem
(e.g. `meson compile -C build src/libmelt/libmelt.dylib`, when
`libmelt.dylib` did not exist as a target the last time the buildsystem
was generated), then you can reconfigure using new settings but
existing options, and only recompiling stuff affected by the changes:
$ meson setup --reconfigure build
Note that changes to the default values in `meson.options` or in the
`default_options :` argument to project() are NOT propagated with
`--reconfigure`.
If you want a totally clean build, you can use:
$ meson setup --wipe build
That will work regardless of if `./build` exists or not.
Specific, named targets may be addressed in
`meson build -C build <target>` with the "target ID" if there is one,
which is the first string argument passed to target functions that
have one, and unrelated to the variable name, e.g.:
libexpr_dylib = library('nixexpr', …)
can be addressed with:
$ meson compile -C build nixexpr
All targets may be addressed as their output, relative to the build
directory, e.g.:
$ meson compile -C build src/libexpr/libnixexpr.so
But Meson does not consider intermediate files like object files
targets. To build a specific object file, use Ninja directly and
specify the output file relative to the build directory:
$ ninja -C build src/libexpr/libnixexpr.so.p/nixexpr.cc.o
To inspect the canonical source of truth on what the state of the
buildsystem configuration is, use:
$ meson introspect
Have fun!
Change-Id: Ia3e7b1e6fae26daf3162e655b4ded611a5cd57ad
this was previously used because the macOS docs build would otherwise
pull files out of the host nix store. or something. not sure about it
Change-Id: I76b51eac1ebc5de5f00e2e4be086dd8db3eeb8e6
manpages can be rendered using the markdown output of mdbook, the rest
of the manual can generated out of the main doc/manual source tree. we
still use lowdown to actually render manpages instead of eg mdbook-man
because lowdown does generate reasonably good manpages (though that is
also somewhat debatable, but they're a lot better than mdbook-man).
doing this not only lets us drastically simplify the lowdown pipeline,
but also remove all custom {{#include}} handling since now mdbook does
all of it, even for the manpage builds. even the lowdown wrapper isn't
entirely necessary because lowdown can take all wrapper arguments with
command line flags rather than bits of input file content.
This also implements running mdbook in Meson, in order to generate the
manpages. The mdbook outputs are also installed in the usual location.
Co-authored-by: Qyriad <qyriad@qyriad.me>
Change-Id: I60193f9fd0f15d48872f071af35855cda2a0f40b
this would make meson build compatibility unnecessarily hard and
the cli does not change often enough to justify this complexity.
Change-Id: I17b1870cdf8538feeaa01a9945db97af2175a642
not sure why this was done the way it was considering that includes are
a feature the doc toolchain had previously. let's just always have some
kind of entry for the upcoming release in the dev manual builds even if
that means having a completely empty release notes chapter.
the release notes generation script isn't entirely functional right now
due to pre-commit hooks, but it's good enough for time being. we need a
better release process for notes anyway.
Change-Id: Ifda6912cf5233db013f72a30247a62d6f22b1565
Change-Id: I9eb347ec4aabc5be2b816ff0fd3e4be45f93b934
for some reason these three were anchors, not links, but had they been
links they wouldn't've worked because they're not defined anywhere but
here. in the print version of the manual they're duplicated many times
over (creating id collisions), so we should better remove them anyway.
Change-Id: I8988a7c32c812dee0f0b6d4953faa7cd1255228d
This reverts commit 70954233743a233744787103d3211237a28ddbca.
This seems to have broken running ninja on warm build directories, which
is not what we want. Reverted until we figure out something better
Change-Id: I9623ae078917e7c59a930bf8044a216501d4bb20
This puts the generated files where they are for the make system.
This is in preparation for further meson-mdbook stuff.
Change-Id: I934df6854a80af5ccf381cf1da0bda0187a8bcfc
The big ones here are `trim-trailing-whitespace` and `end-of-file-fixer`
(which makes sure that every file ends with exactly one newline
character).
Change-Id: Idca73b640883188f068f9903e013cf0d82aa1123
hacking changelog-d to support not just github but also forgejo and
gerrit is a lot more complicated than it's worth, even moreso since
the entire thing can just as well be done with ~60 lines of python.
this new script is also much cheaper to instantiate (being python),
so having it enabled in all shells is far less of a hassle.
we've also adjusted existing release notes that referenced a gerrit
cl to auto-link to the cl in question, making the diff a bit bigger
closes #176
Change-Id: I8ba7dd0070aad9ba4474401731215fcf5d9d2130
Previously, there were two mostly-identical value printers -- one in
`libexpr/eval.cc` (which didn't force values) and one in
`libcmd/repl.cc` (which did force values and also printed ANSI color
codes).
This PR unifies both of these printers into `print.cc` and provides a
`PrintOptions` struct for controlling the output, which allows for
toggling whether values are forced, whether repeated values are tracked,
and whether ANSI color codes are displayed.
Additionally, `PrintOptions` allows tuning the maximum number of
attributes, list items, and bytes in a string that will be displayed;
this makes it ideal for contexts where printing too much output (e.g.
all of Nixpkgs) is distracting. (As requested by @roberth in
https://github.com/NixOS/nix/pull/9554#issuecomment-1845095735)
Please read the tests for example output.
Future work:
- It would be nice to provide this function as a builtin, perhaps
`builtins.toStringDebug` -- a printing function that never fails would
be useful when debugging Nix code.
- It would be nice to support customizing `PrintOptions` members on the
command line, e.g. `--option to-string-max-attrs 1000`.
(cherry picked from commit 0fa08b451682fb3311fe58112ff05c4fe5bee3a4, )
===
Restore ambiguous value printer for `nix-instantiate`
The Nix team has requested that this output format remain unchanged.
I've added a warning to the man page explaining that `nix-instantiate
--eval` output will not parse correctly in many situations.
(cherry picked from commit df84dd4d8dd3fd6381ac2ca3064432ab31a16b79)
Change-Id: I7cca6b4b53cd0642f2d49af657d5676a8554c9f8
structured attrs: improve support / usage of NIX_ATTRS_{SH,JSON}_FILE
(cherry picked from commit 3c042f3b0b0a7ef9c47bf049f5410dbd4aac9e90)
Change-Id: I7e41838338ee1edf31fff6f9e354c3db2bba6c0e
rl-next: Fix and support markdown frontmatter syntax
(cherry picked from commit 69b7876a0810269ad71807594cfd99b26cd8a5ff)
Change-Id: I8bfb8967af0943080fdd70d257c34abaf0a9fedf
nix-shell: support single quotes in shebangs, fix whitespace parsing
(cherry picked from commit 3b99c6291377cbd22607896af9dfafa857d2f2dc)
Change-Id: I2a431b21c3467eefa1ef95d5a36d672f45b6937a
Unit test some worker protocol serializers
(cherry picked from commit c6faef61a6f31c71146aee5d88168e861df9a22a)
Change-Id: I99e36f5f17eb7642211a4e42a16b143424f164b4
do not show configuration override flags for each command
(cherry picked from commit f89b84919c1a5c796512c50311821e7779b3678b)
Change-Id: Ib98b739bd6c9a1e94f94a78a47d84d72e435e7c0
Today, with the tests inside a `tests` intermingled with the
corresponding library's source code, we have a few problems:
- We have to be careful that wildcards don't end up with tests being
built as part of Nix proper, or test headers being installed as part
of Nix proper.
- Tests in libraries but not executables is not right:
- It means each executable runs the previous unit tests again, because
it needs the libraries.
- It doesn't work right on Windows, which doesn't want you to load a
DLL just for the side global variable . It could be made to work
with the dlopen equivalent, but that's gross!
This reorg solves these problems.
There is a remaining problem which is that sibbling headers (like
`hash.hh` the test header vs `hash.hh` the main `libnixutil` header) end
up shadowing each other. This PR doesn't solve that. That is left as
future work for a future PR.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
(cherry picked from commit 91b6833686a6a6d9eac7f3f66393ec89ef1d3b57)
(cherry picked from commit a61e42adb528b3d40ce43e07c79368d779a8b624)
I think it is bad for these reasons when `tests/` contains a mix of
functional and integration tests
- Concepts is harder to understand, the documentation makes a good
unit vs functional vs integration distinction, but when the
integration tests are just two subdirs within `tests/` this is not
clear.
- Source filtering in the `flake.nix` is more complex. We need to
filter out some of the dirs from `tests/`, rather than simply pick
the dirs we want and take all of them. This is a good sign the
structure of what we are trying to do is not matching the structure
of the files.
With this change we have a clean:
```shell-session
$ git show 'HEAD:tests'
tree HEAD:tests
functional/
installer/
nixos/
```
(cherry picked from commit 68c81c737571794f7246db53fb4774e94fcf4b7e)
We use the same nested map representation we used for goals, again in
order to save space. We might someday want to combine with `inputDrvs`,
by doing `V = bool` instead of `V = std::set<OutputName>`, but we are
not doing that yet for sake of a smaller diff.
The ATerm format for Derivations also needs to be extended, in addition
to the in-memory format. To accomodate this, we added a new basic
versioning scheme, so old versions of Nix will get nice errors. (And
going forward, if the ATerm format changes again the errors will be even
better.)
`parsedStrings`, an internal function used as part of parsing
derivations in A-Term format, used to consume the final `]` but expect
the initial `[` to already be consumed. This made for what looked like
unbalanced brackets at callsites, which was confusing. Now it consumes
both which is hopefully less confusing.
As part of testing, we also created a unit test for the A-Term format for
regular non-experimental derivations too.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Apply suggestions from code review
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
this is a pure reformatting, contents were not changed
one sentence per line makes reviewing diffs and making suggestions much
more convenient. the indentation was an artifat of the DocBook
migration.
jade
alois31
eldritch horrors
Qyriad
Rebecca Turner