Commit graph

3068 commits

Author SHA1 Message Date
Ismaël Bouya bd64b2481d
Remove old files 2021-02-24 01:07:11 +01:00
Ismaël Bouya 9d916877fb
Add markdown files for documentation
projects.xml and declarative-projects.xml were merged with xmllint, and
then I ran that to convert files
for i in *.xml; do pandoc -s -f docbook -t markdown $i -o ${i/xml/md}; done
2021-02-24 01:07:00 +01:00
Eelco Dolstra e072c1d741
Merge pull request #874 from regnat/remove-sendDerivation
Remove the `sendDerivation` logic from the builder
2021-02-23 13:07:03 +01:00
regnat f602ed0d86 Remove the sendDerivation logic from the builder
The queue runner used to special-case `localhost` as a remote builder:
Rather than using the normal remote-build (using the
`cmdBuildDerivation` command), it was using the (generally less
efficient, except when running against localhost) `cmdBuildPaths`
command because the latter didn't require a privileged Nix user (so made
testing easier − allowing to run hydra in a container in particular).

However:
1. this means that the build loop can follow two discint code paths depending
   on the setup, the irony being that the most commonly used one in production
   (the “non-localhost” case) isn't the one used in the testsuite (because all
   the tests run against a local store);
2. It turns out that the “localhost” version is buggy in relatively obvious
   ways − in particular a failure in a fixed-output derivation or a hash
   mismatch isn't reported properly;
3. If the “run in a container” use-case is indeed that important, it can be
   (partially) restored using a chroot store (which wouldn't behave excactly
   the same way of course, but would be more than good-enough for testing)
2021-02-23 09:50:15 +01:00
Eelco Dolstra 107d60027f hydra-eval-jobs: Fix unexpected EOF when a top-level attr fails 2021-02-22 16:29:07 +01:00
Eelco Dolstra a7d8ee98da Fix build 2021-02-22 15:10:24 +01:00
Eelco Dolstra 34b438ab6e flake.lock: Update
Flake input changes:

* Updated 'nix': 'github:NixOS/nix/8a2ce0f455da32bc20978e68c0aad9efb4560abc' -> 'github:NixOS/nix/548437c2347159c4c79352283dd12ce58324f1d6'
* Removed 'nix/lowdown-src'
2021-02-22 15:03:20 +01:00
Eelco Dolstra a39b479280
Merge pull request #866 from Infinisil/github-status-flakes
Fix Github status plugin for flakes
2021-02-16 17:00:46 +01:00
Silvan Mosberger 58dd7f9ed3
Fix Github status plugin for flakes
If the root flake is a github: one, github status notifications are sent
to it. The githubstatus->inputs configuration isn't used for flakes.
2021-02-06 00:02:30 +01:00
Graham Christensen d8a5892795
Merge pull request #856 from immae/fix_check_jobsets
Fix check in jobsets
2021-02-03 16:25:18 -05:00
Ismaël Bouya 339a09f2e4
Fix check in jobsets
The current check happening in jobsets is incorrect.
The wanted constraint is stated as follow :
- If type is 0 (legacy), then the flake field should be null, and
  both nixExprInput and nixExprPath should be non-null
- If type is 1 (flake), then the flake field should be non-null, and
  both nixExprInput and nixExprPath should be null

The current version will not catch (i.e. it will accept) situations
where you have for instance :
type = 1, nixExprPath null, nixExprInput non-null, flake non-null

This commit fixes that.

I split(ted) that into two constraints, to make it more readable and
easier to extend if a new type appears in the future.

The complete query could be instead :
( type = 0
  AND nixExprInput IS NOT NULL AND nixExprPath IS NOT NULL AND flake IS NULL )
OR ( type = 1
  AND nixExprInput IS NULL AND nixExprPath IS NULL AND flake IS NOT NULL )

(but an "OR" cannot be split, hence the other formulation)
2021-02-03 22:14:53 +01:00
Graham Christensen bc12fe19f9
Merge pull request #855 from grahamc/jobsetevals-fixups
JobsetEvals: fixup permission references
2021-02-02 11:04:18 -05:00
Graham Christensen 6de9c6540c
Merge pull request #858 from Infinisil/fix-declarative-flakes
Fix transition from declarative non-flake to flake jobset
2021-02-02 11:04:05 -05:00
Graham Christensen ac80843e31
Merge pull request #860 from grahamc/eval-error-table
Move evaluation errors from evaluations to EvaluationErrors, a new table
2021-02-02 10:37:04 -05:00
Graham Christensen f1e75c8bff
Move evaluation errors from evaluations to EvaluationErrors, a new table
DBIx likes to eagerly select all columns without a way to really tell
it so. Therefore, this splits this one large column in to its own
table.

I'd also like to make "jobsets" use this table too, but that is on hold
to stop the bleeding caused by the extreme amount of traffic this is
causing.
2021-02-01 21:33:14 -05:00
Silvan Mosberger 1d45b63516
Fix transition from declarative non-flake to flake jobset
The database has these constraints:

    check ((type = 0) = (nixExprInput is not null and nixExprPath is not null)),
    check ((type = 1) = (flake is not null)),

which prevented switching to flakes in a declarative jobspec, since the
nixexpr{path,input} fields were not nulled in such an update

Co-Authored-By: Graham Christensen <graham@grahamc.com>
2021-02-01 18:57:40 +01:00
Graham Christensen 8d7bfe1706
JobsetEvals: fixup permission references
Going from an eval to a project now requires hopping through the jobset
2021-02-01 10:31:05 -05:00
Graham Christensen aaf16d542c
Merge pull request #854 from NixOS/limit-query-time
search: limit queries to 20s
2021-01-30 11:55:22 -05:00
Graham Christensen 91e63fb7da
search: limit queries to 20s
Even 20s is really long, but it cuts off queries which are today
running for 500+s.
2021-01-30 11:51:20 -05:00
Graham Christensen 72e237fb2f
Merge pull request #853 from NixOS/search-limit-reqs
search: limit results to 50, default to 10
2021-01-30 08:57:05 -05:00
Graham Christensen 4f308b1f2f
search: limit results to 50, default to 10
This search query is pretty heavy. Defaulting to 500 has caused
Hydra's web UI to appear to be down. Since 500 can take it down, users
probably shouldn't be allowed t ask for that many.
2021-01-30 08:37:57 -05:00
Graham Christensen 6d047c286f
Merge pull request #850 from grahamc/jobset-evals-by-id
Jobset -> JobsetEvals by JobsetEvals.jobset_id
2021-01-28 09:25:18 -05:00
Graham Christensen 5fcc2018db
hydra-evaluator: clean up names, clean up & / * spacing 2021-01-28 09:15:19 -05:00
Graham Christensen 091d58c128
hydra-dev-server: autoflush stderr/stdout 2021-01-26 13:51:39 -05:00
Graham Christensen 54b8cb188e
perl: jobsetevals -> jobset via by jobset_id
Frankly, this was suspiciously little work.
2021-01-26 13:51:39 -05:00
Graham Christensen 54341cd9f6
hydra-evaluator: deal in jobset IDs 2021-01-26 13:51:31 -05:00
Graham Christensen cb01859718
hydra-evaluator: JobsetName -> JobsetIdentity 2021-01-26 11:50:38 -05:00
Graham Christensen 705a45df2b
hydra-evaluator: reformat readJobsets query 2021-01-26 11:50:37 -05:00
Graham Christensen ac3e8a4a59
jobsetevals: refer to jobset by ID 2021-01-26 11:50:37 -05:00
Graham Christensen 99e3c83358
JobsetEvals: noop: re-run the generator to update the order of fields 2021-01-26 11:50:36 -05:00
Graham Christensen bf674a9653
hydra.sql: embed some in-line docs about schema changes 2021-01-26 11:50:36 -05:00
Graham Christensen dc5a0d59c5
sql: Stop loading SQL if an error occurs
Otherwise we may go ahead and create DBIx classes for a half-loaded schema.
2021-01-26 11:50:32 -05:00
Eelco Dolstra d0b3f2dac4
Merge pull request #848 from grahamc/normalize-nixexprinputpath
Normalize nixexpr{input,path} from builds to jobsetevals.
2021-01-25 15:22:01 +01:00
Graham Christensen 9516b256f1
Normalize nixexpr{input,path} from builds to jobsetevals.
Duplicating this data on every record of the builds table cost
approximately 4G of duplication.

Note that the database migration included took about 4h45m on an
untuned server which uses very slow rotational disks in a RAID5 setup,
with not a lot of RAM. I imagine in production it might take an hour
or two, but not 4. If this should become a chunked migration, I can do
that.

Note: Because of the question about chunked migrations, I have NOT
YET tested this migration thoroughly enough for merge.
2021-01-22 09:10:18 -05:00
Eelco Dolstra 53c2fc2216
Merge pull request #847 from grahamc/jobsetevals-evaluation-errors
JobsetEvals: record evaluation errors
2021-01-22 15:08:22 +01:00
Graham Christensen bd99052a6f
tests: create database with the utf-8 locale
Otherwise tests may fail with wide character errors.
2021-01-21 17:08:05 -05:00
Graham Christensen c64c4aac4f
jobset page: render error labels per eval 2021-01-21 17:08:02 -05:00
Graham Christensen 805dd6e7ee
Evaluation page: render evaluation errors 2021-01-21 13:11:05 -05:00
Graham Christensen 086eed5147
hydra-eval-jobs: write evaluation errorMsg to the jobseteval table 2021-01-21 13:10:41 -05:00
Graham Christensen fb6b10a86c
gitignore: artifacts 2021-01-21 13:10:41 -05:00
Graham Christensen d9989b7fa1
Schema: add errorMsg, errorTime to JobsetEvals 2021-01-21 13:10:41 -05:00
Eelco Dolstra 6bb876cb35
Merge pull request #846 from grahamc/buildoutputs-index-hash-path
BuildOutputs: index path with HASH
2021-01-18 20:01:44 +01:00
Graham Christensen bc4b96d053
BuildOutputs: index path with HASH
Looking at AWS' Performance Insights for a Hydra instance, I found
the hydra-queue-runner's query:

    select id, buildStatus, releaseName, closureSize, size
    from Builds b
    join BuildOutputs o on b.id = o.build
    where
      finished = ?
      and (buildStatus = ? or buildStatus = ?)
      and path = $1

was the slowest query by at least 10x. Running an explain on this
showed why:

hydra=> explain select id, buildStatus, releaseName, closureSize, size
    from Builds b join BuildOutputs o on b.id = o.build where
    finished = 1 and (buildStatus = 0 or buildStatus = 6) and
    path = '/nix/store/s93khs2dncf2cy273mbyr4fb4ns3db20-MIDIVisualizer-5.1';

                                                     QUERY PLAN
    ------------------------------------------------------------------------
     Gather  (cost=1000.43..33718.98 rows=2 width=56)
       Workers Planned: 2
       ->  Nested Loop  (cost=0.43..32718.78 rows=1 width=56)
             ->  Parallel Seq Scan on buildoutputs o  (cost=0.00..32710.32
                                                       rows=1
                                                        width=4)
                   Filter: (path = '/nix/store/s93kh...snip...'::text)
             ->  Index Scan using indexbuildsonjobsetidfinishedid on builds b
                                            (cost=0.43..8.45 rows=1 width=56)
                   Index Cond: ((id = o.build) AND (finished = 1))
                   Filter: ((buildstatus = 0) OR (buildstatus = 6))
    (8 rows)

A paralell sequential scan is definitely better than a sequential scan, but the
cost ranging from 0 to 32710 is not great. Looking at the table, I saw the `path`
column is completely unindex:

    hydra=> \d buildoutputs
                Table "public.buildoutputs"
    Column |  Type   | Collation | Nullable | Default
    --------+---------+-----------+----------+---------
    build  | integer |           | not null |
    name   | text    |           | not null |
    path   | text    |           | not null |
    Indexes:
        "buildoutputs_pkey" PRIMARY KEY, btree (build, name)
    Foreign-key constraints:
        "buildoutputs_build_fkey" FOREIGN KEY (build) REFERENCES builds(id)
            ON DELETE CASCADE

Since we always do exact matches on the path and don't care about ordering,
and since the path column is very high cardinality a `hash` index is a
good candidate. Note that I did test a btree index and it performed
similarly well, but slightly worse.

After creating the index (this took about 10 seconds) on a test database:

    create index IndexBuildOutputsPath on BuildOutputs using hash(path);

We get a *significantly* reduced cost:

    hydra=> explain select id, buildStatus, releaseName, closureSize, size
    hydra->     from Builds b join BuildOutputs o on b.id = o.build where
    hydra->     finished = 1 and (buildStatus = 0 or buildStatus = 6) and
    hydra->     path = '/nix/store/s93khs2dncf2cy273mbyr4fb4ns3db20-MIDIVisualizer-5.1';
                                                QUERY PLAN
    -------------------------------------------------------------------------------------------------------
    Nested Loop  (cost=0.43..41.41 rows=2 width=56)
    ->  Index Scan using buildoutputs_path_hash on buildoutputs o  (cost=0.00..16.05 rows=3 width=4)
            Index Cond: (path = '/nix/store/s93khs2dncf2cy273mbyr4fb4ns3db20-MIDIVisualizer-5.1'::text)
    ->  Index Scan using indexbuildsonjobsetidfinishedid on builds b  (cost=0.43..8.45 rows=1 width=56)
            Index Cond: ((id = o.build) AND (finished = 1))
            Filter: ((buildstatus = 0) OR (buildstatus = 6))
    (6 rows)

For direct comparison, the overall query plan was changed:

    From: Gather      (cost=1000.43..33718.98 rows=2 width=56)
    To:   Nested Loop (cost=   0.43.....41.41 rows=2 width=56)

and the query plan for buildoutputs changed from a maximum cost of
32,710 down to 16.

In practical terms, the query's planning and execution time was reduced:

Before (ms) | Try 1   | Try 2   | Try 3
------------+---------+---------+--------
Planning    |   0.898 |   0.416 |   0.383
Execution   | 138.644 | 172.331 | 375.585

After (ms)  | Try 1   | Try 2   | Try 3
------------+---------+---------+--------
Planning    |   0.298 |   0.290 |   0.296
Execution   | 219.625 |   0.035 |   0.034
2021-01-18 11:28:05 -05:00
Eelco Dolstra be0aa7eb85
Merge pull request #841 from pingiun/github-login
Implement GitHub logins
2021-01-05 14:51:51 +01:00
Jelle Besseling 43d662f63a
Don't use enable_github_login option after all
Instead the github_client_id option is used to detect if github logins
should be enabled.
2021-01-04 18:09:49 +01:00
Jelle Besseling c49ca66689
Die when no email is found 2021-01-04 18:09:05 +01:00
Jelle Besseling 20d8134936
Update src/lib/Hydra/Controller/User.pm
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
2021-01-04 17:48:43 +01:00
Jelle Besseling 19f9d8249f
Update src/lib/Hydra/Controller/User.pm
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
2021-01-04 17:48:37 +01:00
Eelco Dolstra 20d09518f8
Merge pull request #839 from pingiun/shield-io
Add endpoint to generate a shields.io badge
2021-01-04 14:09:09 +01:00
Eelco Dolstra 525a229dac Convert validate-openapi to a Hydra job 2021-01-03 18:47:05 +01:00