This prevents a race where multiple threads see that machine X is
missing path P, and start sending it concurrently. Nix handles this
correctly, but it's still wasteful (especially for the case where P ==
GHC).
A more refined scheme would be to have per machine, per path locks.
Derivations with "preferLocalBuild = true" can now be executed on
specific machines (typically localhost) by setting the mandary system
features field to include "local". For example:
localhost x86_64-linux,i686-linux - 10 100 - local
says that "localhost" can *only* do builds with "preferLocalBuild =
true". The speed factor of 100 will make the machine almost always win
over other machines.
Otherwise we never recover from reset daemon connections, e.g.
hydra-queue-runner[16106]: while loading build 599369: cannot start daemon worker: reading from file: Connection reset by peer
hydra-queue-runner[16106]: while loading build 599236: writing to file: Broken pipe
...
The error is now handled queueMonitor(), causing the next call to
queueMonitorLoop() to create a new connection.
This is currently done by a separate program that periodically
calls "hydra-queue-runner --status". Eventually, I'll do this
in the queue runner directly.
Fixes#220.
Having a hundred threads doing I/O at the same time is bad on magnetic
disks because of the excessive disk seeks. So allow only 4 threads to
copy closures in parallel.
While sorting machines by load, the load of a machine
(machine->currentJobs) can be changed by other threads. If that
happens, the comparator is no longer a proper ordering, in which case
std::sort() can segfault. So we now make a copy of currentJobs before
sorting.
There is a slight possibility that the queue monitor and a builder
thread simultaneously decide to mark a build as finished. That's fine,
as long as we ensure the DB update is idempotent (as ensured by doing
"update Builds set finished = 1 ... where finished = 0").
If a build A depends on a derivation that is the top-level derivation
of some build B, then we should process B before A (meaning we
shouldn't make the derivation runnable before B has been
added). Otherwise, the derivation will be "accounted" to A rather than
B (so the build step will show up in the wrong build).
Aborted builds are now put back on the runnable queue and retried
after a certain time interval (currently 60 seconds for the first
retry, then tripled on each subsequent retry).
Hydra-queue-runner now no longer polls the queue periodically, but
instead sleeps until it receives a notification from PostgreSQL about
a change to the queue (build added, build cancelled or build
restarted).
Also, for the "build added" case, we now only check for builds with an
ID greater than the previous greatest ID. This is much more efficient
if the queue is large.
It just makes things unnecessarily complicated. We can just exit
without cleaning anything up, since the only thing to do is unmark
builds and build steps as busy. But we can do that by having systemd
call "hydra-queue-runner --unlock" from ExecStopPost.
If multiple threads create a step for the same build, they could get
the same "max(stepnr)" and allocate conflicting new step numbers. So
lock the BuildSteps table while doing this. We could use a different
isolation level, but this is easier.
This removes the need for Nix's build-remote.pl.
Build logs are now written to $HYDRA_DATA/build-logs because
hydra-queue-runner doesn't have write permission to /nix/var/log.
When visiting the tail-reload page, for a short amount of time the
"unscrolled" version is shown. To circumvent that, let's scroll down
immediately at the first possibility to fill the gap between the loading
of the document and the first AJAX request coming in.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
There are quite a lot of build outputs which have lines with a length
exceeding the width of the taillog <pre/> and thus visually produce more
lines than 50. This causes the tail "box" to change height frequently
and to get to the bottom you need to scroll down.
We now set a fixed line-height to 120% of the font size and cap the
maximum height based on that value (50 * 1.2 = 60). It's probably not
nice to override the line-height, but max-lines is currently only
available using browser-specific property names. But after all it's just
for the tail output, if people complain about the line-height, we can
still change it :-)
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
We're just implicitly escaping the tail content by not using .load() but
explicitly setting the text content using .text(), so that escaping
isn't needed on our side.
This should get rid of a few formatting errors and possibly XSS if
someone manages to place JS code in the tail of a build and manages to
lurk a user to that tail output.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Like eval IDs, build IDs don't convey useful information.
Also, make the job name link to the build rather than the job. When
people click on a build, they expect to go to the build page, not the
job page.
Scheduling is mostly based on jobset shares these days. So showing and
sorting by priority just wastes space and gives the incorrect
impression that Hydra executes builds in the order shown on the queue
page.
These give warnings in Perl >= 5.18:
given is experimental at /home/hydra/src/hydra/src/lib/Hydra/Helper/CatalystUtils.pm line 241.
when is experimental at /home/hydra/src/hydra/src/lib/Hydra/Helper/CatalystUtils.pm line 242.
...
There is no point in indexing rows with common column values like
"finished = 1", since those are the majority of the table. Only the
exceptions ("finished = 0") are interesting. Having smaller tables
should make updates/insertions faster.
This incorporates the following two commits from <nixpkgs>:
NixOS/nixpkgs@f83af95f8aNixOS/nixpkgs@5e7a1cf955
Hydra was the original reason why I was fixing tempdir creation in the
first place. Seeing that Hydra ships its own versions of these scripts,
we need to patch them here as well.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
If hydra-eval-jobs creates a new root, and hydra-update-gc-roots runs
before hydra-evaluator has had a chance to add the corresponding build
to the database, then hydra-update-gc-roots will remove the root. If
subsequently the Nix garbage collector kicks in, it may remove the
build's .drv file before the build is performed. Since evaluation of
the Nixpkgs and NixOS jobsets nowadays takes a lot of time (e.g. an
hour), the probability of this happening is fairly high.
The quick fix is not to delete roots that are less than a day old. So
long as evaluation doesn't take longer than a day, this should be fine
;-)
Fixes#166.
This adds a Hydra plugin for users to submit their open source projects
to the Coverity Scan system for analysis.
First, add a <coverityscan> section to your Hydra config, including the
access token, project name, and email, and a regex specifying jobs to
upload:
<coverityscan>
project = testrix
jobs = foobar:.*:coverity.*
email = aseipp@pobox.com
token = ${builtins.readFile ./coverity-token}
</coverityscan>
This will upload the scan results for any job whose name matches
'coverity.*' in any jobset in the Hydra 'foobar' project, for the
Coverity Scan project named 'testrix'.
Note that one upload will occur per job matched by the regular
expression - so be careful with how many builds you upload.
The jobs which are matched by the jobs specification must have a file in
their output path of the form:
$out/tarballs/...-cov-int.(xz|lzma|zip|bz2|tgz)
The file must have the 'cov-int' directory produced by `cov-build` in
the root.
(You can also output something into
$out/nix-support/hydra-build-products for the Hydra UI.)
This file will be found in the store, and uploaded to the service
directly using your access credentials. Note the exact extension: don't
use .tar.xz, only use .xz specifically.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Fixes errors like:
Caught exception in engine "Wide character in syswrite at /nix/store/498lwsrn5kkdh1q8kn3vcpd3457w6m7a-hydra-perl-deps/lib/perl5/site_perl/5.16.3/Starman/Server.pm line 547."
Note that these errors didn't happen if the database encoding was set
to SQL_ASCII (which was the case for hydra.nixos.org, explaining why
it didn't get these errors). However, now the encoding must be
UTF8. To change it, do:
update pg_database set encoding = pg_char_to_encoding('UTF8') where datname = 'hydra';
This gets rid of the warning:
DBIx::Class::Storage::DBI::select_single(): Query returned more than one row. SQL that returns multiple rows is DEPRECATED for ->find and ->single at /home/eelco/Dev/hydra/src/script/../lib/Hydra/Controller/Project.pm line 15
In the dashboard and on the job page, indicate whether the job appears
in the latest jobset eval. That way, the user gets some indication if
a job has accidentally disappeared (e.g. due to an evaluation error).
Use the following in your hydra.conf to make your instance a
private Hydra instance (public is the default):
private 1
Currently, this will not allow you to use the API, channels
and the binary cache when running in private mode. We will add
solutions for these functionalities later.
This requires adding the following to hydra.conf:
binary_cache_key_name = <key-name>
binary_cache_private_key_file = <path-to-private-key>
e.g.
binary_cache_key_name = hydra.nixos.org-1
binary_cache_private_key_file = /home/hydra/cache-key.sec
All successful, non-garbage-collected builds in the evaluation are
passed in a attribute set. So if you declare a Hydra input named
‘foo’ of type ‘eval’, you get a set with members ‘foo.<jobname>’. For
instance, if you passed a Nixpkgs eval as an input named ‘nixpkgs’,
then you could get the Firefox build for x86_64-linux as
‘nixpkgs.firefox.x86_64-linux’.
Inputs of type ‘eval’ can be specified in three ways:
* As the number of the evaluation.
* As a jobset identifier (‘<project>:<jobset>’), which will yield the
latest finished evaluation of that jobset. Note that there is no
guarantee that any job in that evaluation has succeeded, so it might
not be very useful.
* As a job identifier (‘<project>:<jobset>:<job>’), which will yield
the latest finished evaluation of that jobset in which <job>
succeeded. In conjunction with aggregate jobs, this allows you to
make sure that the evaluation contains the desired builds.
For users who only have the "create-projects" role, actually display the
item in the menu as the only option.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This reverts commit 2d7e106d29.
Unfortunately some jobsets still depend on this behaviour. They could
probably do something like "assert system == input.system; ..." but
changing them all is undesirable.
Include information about who changed the build status in notification
emails, and enable optional per-input notification of said committers.
Conflicts due to two branches modifying the database schema.
Signed-off-by: Shea Levy <shea@shealevy.com>
Conflicts:
src/lib/Hydra/Schema/Jobsets.pm
src/sql/upgrade-23.sql
Currently the dashboard allows users to get a quick overview of the
status of jobs they're interested in, but more will be added,
e.g. viewing all your jobsets or all jobs of which you're a
maintainer.
There are jobsets that are evaluated only once, that is, after they've
been evaluated, they're disabled automatically. This is primarily
useful for doing releases: for instance, doing an evaluation with
"officialRelease" set to "true" should be done only once.
If there are builds in the queue that depend on another scheduled
build, then hydra-queue-runner will start the dependency first and
block the dependent builds. This is implemented in
findBuildDependencyInQueue. However, if there are tens of thousands
of such dependent builds, since each call to
findBuildDependencyInQueue may take a second or so, hydra-queue-runner
will spend hours just deciding which builds *not* to do. Thus very
little progress is made.
So now, when a build is started, we immediately check which builds are
"blocked" by it (i.e. depend on it), and remove such builds from
consideration.
We can just show the normal "edit jobset" page for the original jobset
and then do a PUT request to create a new jobset.
Also simplified updating the jobset inputs. We can just delete all of
them and recreate them from the user parameters. That's safe because
it's done in a transaction.
It's now a dropdown menu in the tabs thingy, which subsumes the
"Reproduce locally" button. This makes the actions in the menu a bit
more visible, IMHO.
This commit is provided by (zsh syntax):
sed -i 's|/static[^"]*|[% c.uri_for("&") %]|;s/\[% size %\]/${size}/' **/*.tt
And the reason for this change is to make it easier to change the base
path with headers like X-Request-Base to be served within a URI prefix,
especially when behind a reverse proxy.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Pick the jobset that has used the smallest fraction of its share,
rather than the jobset furthest below its share in absolute terms.
This gives jobsets with a small share a quicker start (but they
will also run out of their share quicker).
Each jobset now has a "scheduling share" that determines how much of
the build farm's time it is entitled to. For instance, if a jobset
has 100 shares and the total number of shares of all jobsets is 1000,
it's entitled to 10% of the build farm's time. When there is a free
build slot for a given system type, the queue runner will select the
jobset that is furthest below its scheduling share over a certain time
window (currently, the last day). Withing that jobset, it will pick
the build with the highest priority.
So meta.schedulingPriority now only determines the order of builds
within a jobset, not between jobsets. This makes it much easier to
prioritise one jobset over another (e.g. nixpkgs:trunk over
nixpkgs:stdenv).
In your hydra config, you can add an arbitrary number of <s3config>
sections, with the following options:
* name (required): Bucket name
* jobs (required): A regex to match job names (in project:jobset:job
format) that should be backed up to this bucket
* compression_type: bzip2 (default), xz, or none
* prefix: String to prepend to all hydra-created s3 keys (if this is
meant to represent a directory, you should include the trailing slash,
e.g. "cache/"). Default "".
After each build with an output (i.e. successful or failed-with-output
builds), the output path and its closure are uploaded to the bucket as
.nar files, with corresponding .narinfos to enable use as a binary
cache.
This plugin requires that s3 credentials be available. It uses
Net::Amazon::S3, which as of this commit the nixpkgs version can
retrieve s3 credentials from the AWS_ACCESS_KEY_ID and
AWS_SECRET_ACCESS_KEY environment variables, or from ec2 instance
metadata when using an IAM role.
This commit also adds a hydra-s3-backup-collect-garbage program, which
uses hydra's gc roots directory to determine which paths are live, and
then deletes all files except nix-cache-info and any .nar or .narinfo
files corresponding to live paths. hydra-s3-backup-collect-garbage
respects the prefix configuration option, so it won't delete anything
outside of the hierarchy you give it, and it has the same credential
requirements as the plugin. Probably a timer unit running the garbage
collection periodically should be added to hydra-module.nix
Note that two of the added tests fail, due to a bug in the interaction
between Net::Amazon::S3 and fake-s3. Those behaviors work against real
s3 though, so I'm committing this even with the broken tests.
Signed-off-by: Shea Levy <shea@shealevy.com>
We now keep *all* unfinished evaluations of a jobset, in addition to
the <keepnr> most recent finished evaluations.
The main motivation is to ensure that mirror-{nixos,nixpkgs} work
properly: if building an evaluation takes too long, some of its builds
may already have been garbage-collected by the time the others finish.
We had Postgres barfing with this error:
DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::Pg::st execute failed: ERROR: stack depth limit exceeded
because the ‘drvpath => [ @dependentDrvs ]’ in failDependents can
cause a query of unbounded size. (In this specific case there was a
failure of Bison, which has > 10000 dependent derivations.) So now we
just get all scheduled builds from the DB.
Due to the fixed-output derivation hashing scheme, there can be
multiple derivations of the same output path. But build logs are
indexed by derivation path. Thus, we may not be able to find the
log of a build or build step using its derivation. So as a fallback,
Hydra now looks for other derivations with the same output paths.
They're mostly redundant since there is a faster "jobs" tab on
the jobset pages now. The only thing the latter lacks is the
ability to see status change times, but those are quite expensive
to compute, and are visible on build pages if you really need them.
PostgreSQL and Perl have different sort orders, in particular when
comparing job names such as "aspell.x86_64-linux" and
"aspellDicts.cs.i686-freebsd". This confused the evaluation
comparison code, causing some jobs to appear as "removed".
So now we do all the sorting in Perl.
Fixes#105.
Aggregate constituents are derivations. However there can be multiple
builds in an evaluation that have the same derivation, i.e. they can
alias each other (e.g. "emacs", "emacs24" and "emacs24Packages.emacs"
in Nixpkgs). Previously we picked a build arbitrarily for the
AggregateConstituents table. Now we pick the one with the shortest
name (e.g. "emacs").
We now keep all builds in the N most recent evaluations of a jobset,
rather than the N most recent builds of every job. Note that this
means that typically fewer builds will be kept (since jobs may be
unchanged across evaluations).
For presentation purposes, we need to know what builds are part of an
aggregate build. So at evaluation time, look at the "members"
attribute, find the corresponding builds in the eval, and create a
mapping in the AggregateMembers table.
It redirects to the latest successful build from a finished
evaluation. This is mostly useful for the Nixpkgs/NixOS mirroring
script, which need the latest finished evaluation in which some
aggregate job (such as ‘tested’ in NixOS) succeeded.
The NrBuilds table tracks the value of ‘select count(*) from Builds
where finished = 0’, keeping it up to date via a trigger. This is
necessary to make the /all page fast, since otherwise it needs to do a
sequential scan on the Builds table.
Doing a chdir in the parent is evil. For instance, we had Hydra core
dumps ending up in the cloned directory. Therefore, the function
‘run’ allows doing a chdir in the child. The function ‘grab’ returns
the child's stdout and throws an exception if the child fails.
This allows users to sign in to Hydra using Mozilla Persona accounts.
When a user first sign in, a row in the Users table for the given
Persona identity (an email address) is created automatically.
To do: figure out how to deal with legacy accounts.
The catalyst-action-rest branch from shlevy/hydra was an exploration of
using Catalyst::Action::REST to create a JSON API for hydra. This commit
merges in the best bits from that experiment, with the goal that further
API endpoints can be added incrementally.
In addition to migrating more endpoints, there is potential for
improvement in what's already been done:
* The web interface can be updated to use the same non-GET endpoints as
the JSON interface (using x-tunneled-method) instead of having a
separate endpoint
* The web rendering should use the $c->stash->{resource} data structure
where applicable rather than putting the same data in two places in
the stash
* Which columns to render for each endpoint is a completely debatable
question
* Hydra::Component::ToJSON should turn has_many relations that have
strings as their primary keys into objects instead of arrays
FixesNixOS/hydra#98
Signed-off-by: Shea Levy <shea@shealevy.com>
HipChat notification messages now say which committers were
responsible, e.g.
Job patchelf:trunk:tarball: Failed, probably due to 2 commits by Eelco Dolstra
This plugin sends notification of build failure or success to a
HipChat room, if the status differs from the last build.
The plugin can be configured by adding one or more of these stanzas to
hydra.conf:
<hipchat>
jobs = (patchelf|nixops):.*:.*
room = 1234
token = 39ab2198fe...
</hipchat>
Here "jobs" is a regular expression against which the fully qualified
job name of the build is matched (so for instance
"nixops:master:tarball" will match the stanza above).
Restarted builds whose derivation has been garbage-collected in the
meantime caused hydra-queue-runner to get stuck in a loop saying:
Jun 14 11:54:25 lucifer hydra-queue-runner[31844]: system type `x86_64-darwin': 0 active, 2 allowed, started 2 builds
Jun 14 11:54:25 lucifer hydra-queue-runner[31844]: {UNKNOWN}: path `/nix/store/wcizsch2garjlvs4pswrar47i1hwjaia-inconsolata.drv' is not valid at
/nix/store/ypkdm4v13yrk941rvp8h0y425a5ww6nm-hydra-0.1pre1353-40debf1/bin/.hydra-queue-runner-wrapped line 51. at
/nix/store/kjpsc2zdaxnd44azxyw60f2px839m1cd-hydra-perl-deps/lib/perl5/site_perl/5.16.2/Catalyst/Model/DBIC/Schema.pm line 501
This happens if the previous iteration took more than 60 seconds.
Then the queue runner may think that builds failed to start properly
and unlock them, e.g.
build 5264936 pid 19248 died, unlocking
build 5264951 pid 19248 died, unlocking
build 5257073 pid 19248 died, unlocking
...
Because we don't start a build if a dependency is already building,
it's possible that some or all of the $extraAllowed highest-priority
builds in the queue are not eligible. E.g. with $extraAllowed = 32,
we might start only 3 builds even though there are thousands in the
queue. The fix is to try all queued builds until $extraAllowed have
been started.
Issue #99.
For some reason, hg clone from a local (path-based) repo will fail if
the parent directory of the destination directory doesn't exist (though
it succeeds when cloning from an http repo).
Signed-off-by: Shea Levy <shea@shealevy.com>
Previously, for scheduled builds, "timestamp" contained the time the
build was added to the queue, while for finished builds, it was the
time the build finished. Now it's always the former.
The revision counting changes depending on which revision is cloned
initially, so clone the default branch first and then checkout the
required revision to match hydra's revCount.
Signed-off-by: Shea Levy <shea@shealevy.com>
See e.g. http://hydra.nixos.org/build/4915744.
P.S. existing active build steps of finished builds can be marked as
aborted by running:
update buildsteps set busy = 0, status = 4
where (build, stepnr) in
(select s.build, s.stepnr from buildsteps s join builds b on s.build = b.id where b.finished = 1 and s.busy = 1);
This is mostly so we don't have to pass around common parameters like
"db" and "config", and we don't have to check for the existence of
methods.
A plugin now looks like this:
package Hydra::Plugin::TwitterNotification;
use parent 'Hydra::Plugin';
sub buildFinished {
my ($self, $build, $dependents) = @_;
print STDERR "tweeting about build ", $build->id, "\n";
# Send tweet...
# Hydra database is $self->{db}.
}
You can now add plugins to Hydra by writing a module called
Hydra::Plugin::<whatever> and putting it in Perl's search path. The
only plugin operation currently supported in buildFinished, called
when hydra-build has finished doing a build.
For instance, a Twitter notification plugin would look like this:
package Hydra::Plugin::TwitterNotification;
sub buildFinished {
my ($self, $db, $config, $build, $dependents) = @_;
print STDERR "tweeting about build ", $build->id, "\n";
# send tweet...
}
1;
Previously this function didn't actually have a lot of effect. If a
build A had a dependency B, Hydra would start B first. But on the
next scan through the queue, it would start A anyway, because of the
"busy => 0" restriction.
Now the queue runner won't start a build if a dependency is already
running. (This is not necessarily optimal, since the build may have
other dependencies that don't correspond to a build in the queue but
could run. One day we'll start all Hydra builds in parallel...)
Also, for performance, use computeFSClosure instead of "nix-store
-qR". And don't bother with topological sorting because it didn't
have an effect anyway since the database returns dependencies in
arbitrary order.
This allows checking a jobset (say) at most once a day. It's also
possible to disable polling by setting the interval to 0. This is
useful for jobsets that use push notification or are manually
evaluated.
This caused exceptions like:
Caught exception in Hydra::Controller::Build->view_build "writing to file: Broken pipe at /nix/store/ihdb3widsq1dk7sbl5vqjxfcxb5ypad4-hydra-0.1pre1297-8158093/libexec/hydra/lib/Hydra/Controller/Build.pm line 59."
because the connection to the Nix daemon would be terminated due to a
protocol violation (calling queryPathInfo with an empty string).
