This allows building armv[67]l-linux derivations on compatible aarch64
machines. Failure to add the architecture may result from missing
hardware support, in which case we can't run 32-bit binaries and don't
need to restrict them with seccomp anyway,
This was caused by derivations with 'allowSubstitutes = false'. Such
derivations will be built locally. However, if there is another
SubstitionGoal that has the output of the first derivation in its
closure, then the path will be simultaneously built and substituted.
There was a check to catch this situation (via pathIsLockedByMe()),
but it no longer worked reliably because substitutions are now done in
another thread. (Thus the comment 'It can't happen between here and
the lockPaths() call below because we're not allowing multi-threading'
was no longer valid.)
The fix is to handle the path already being locked in both
SubstitutionGoal and DerivationGoal.
All ANSI sequences except color setting are now filtered out. In
particular, terminal resets (such as from NixOS VM tests) are filtered
out.
Also, fix the completely broken tab character handling.
This is needed by nixos-install, which uses the Nix store on the
installation CD as a substituter. We don't want to disable signature
checking entirely because substitutes from cache.nixos.org should
still be checked. So now we can pas "local?trusted=1" to mark only the
Nix store in /nix as not requiring signatures.
Fixes#1819.
Instead, if a fixed-output derivation produces has an incorrect output
hash, we now unconditionally move the outputs to the path
corresponding with the actual hash and register it as valid. Thus,
after correcting the hash in the Nix expression (e.g. in a fetchurl
call), the fixed-output derivation doesn't have to be built again.
It would still be good to have a command for reporting the actual hash
of a fixed-output derivation (instead of throwing an error), but
"nix-build --hash" didn't do that.
This will allow bind and connect to 127.0.0.1, which can reduce purity/
security (if you're running a vulnerable service on localhost) but is
also needed for a ton of test suites, so I'm leaving it turned off by
default but allowing certain derivations to turn it on as needed.
It also allows DNS resolution of arbitrary hostnames but I haven't found
a way to avoid that. In principle I'd just want to allow resolving
localhost but that doesn't seem to be possible.
I don't think this belongs under `build-use-sandbox = relaxed` because we
want it on Hydra and I don't think it's the end of the world.
This makes it slightly more manageable to see at a glance what in a
build's sandbox profile is unique to the build and what is standard. Also
a first step to factoring more of our Darwin logic into scheme functions
that will allow us a bit more flexibility. And of course less of that
nasty codegen in C++! 😀
I needed this to test ACL/xattr removal in
canonicalisePathMetaData(). Might also be useful if you need to build
old Nixpkgs that doesn't have the required patches to remove
setuid/setgid creation.
Since we may use a dedicated file descriptor in the future, this
allows us to change it. So builders can do
if [[ -n $NIX_LOG_FD ]]; then
echo "@nix { message... }" >&$NIX_LOG_FD
fi
Nix can now automatically run the garbage collector during builds or
while adding paths to the store. The option "min-free = <bytes>"
specifies that Nix should run the garbage collector whenever free
space in the Nix store drops below <bytes>. It will then delete
garbage until "max-free" bytes are available.
Garbage collection during builds is asynchronous; running builds are
not paused and new builds are not blocked. However, there also is a
synchronous GC run prior to the first build/substitution.
Currently, no old GC roots are deleted (as in "nix-collect-garbage
-d").
Without this, substitute info is fetched sequentially, which is
superslow. In the old UI (e.g. nix-build), we call printMissing(),
which calls queryMissing(), thereby preheating the binary cache
cache. But the new UI doesn't do that.
In particular, drop the "build-" and "gc-" prefixes which are
pointless. So now you can say
nix build --no-sandbox
instead of
nix build --no-build-use-sandbox
This allows builds to call setuid binaries. This was previously
possible until we started using seccomp. Turns out that seccomp by
default disallows processes from acquiring new privileges. Generally,
any use of setuid binaries (except those created by the builder
itself) is by definition impure, but some people were relying on this
ability for certain tests.
Example:
$ nix build '(with import <nixpkgs> {}; runCommand "foo" {} "/run/wrappers/bin/ping -c 1 8.8.8.8; exit 1")' --no-allow-new-privileges
builder for ‘/nix/store/j0nd8kv85hd6r4kxgnwzvr0k65ykf6fv-foo.drv’ failed with exit code 1; last 2 log lines:
cannot raise the capability into the Ambient set
: Operation not permitted
$ nix build '(with import <nixpkgs> {}; runCommand "foo" {} "/run/wrappers/bin/ping -c 1 8.8.8.8; exit 1")' --allow-new-privileges
builder for ‘/nix/store/j0nd8kv85hd6r4kxgnwzvr0k65ykf6fv-foo.drv’ failed with exit code 1; last 6 log lines:
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=46 time=15.2 ms
Fixes#1429.
Functions like copyClosure() had 3 bool arguments, which creates a
severe risk of mixing up arguments.
Also, implement copyClosure() using copyPaths().
Sandboxes cannot be nested, so if Nix's build runs inside a sandbox,
it cannot use a sandbox itself. I don't see a clean way to detect
whether we're in a sandbox, so use a test-specific hack.
https://github.com/NixOS/nix/issues/1413
Even with "build-use-sandbox = false", we now use sandboxing with a
permissive profile that allows everything except the creation of
setuid/setgid binaries.
Also, add rules to allow fixed-output derivations to access the
network.
These rules are sufficient to build stdenvDarwin without any
__sandboxProfile magic.
The filename used was not unique and owned by the build user, so
builds could fail with
error: while setting up the build environment: cannot unlink ‘/nix/store/99i210ihnsjacajaw8r33fmgjvzpg6nr-bison-3.0.4.drv.sb’: Permission denied
Fixes
src/libstore/build.cc:2321:45: error: non-constant-expression cannot be narrowed from type 'int' to 'scmp_datum_t' (aka 'unsigned long') in initializer list [-Wc++11-narrowing]
This prevents builders from setting the S_ISUID or S_ISGID bits,
preventing users from using a nixbld* user to create a setuid/setgid
binary to interfere with subsequent builds under the same nixbld* uid.
This is based on aszlig's seccomp code
(47f587700d).
Reported by Linus Heckemann.
This is useful when we're using a diverted store (e.g. "--store
local?root=/tmp/nix") in conjunction with a statically-linked sh from
the host store (e.g. "sandbox-paths =/bin/sh=/nix/store/.../bin/busybox").
There is a security issue when a build accidentally stores its $TMPDIR
in some critical place, such as an RPATH. If
TMPDIR=/tmp/nix-build-..., then any user on the system can recreate
that directory and inject libraries into the RPATH of programs
executed by other users. Since /build probably doesn't exist (or isn't
world-writable), this mitigates the issue.
This is useful for one-off situations where you want to specify a
builder on the command line instead of having to mess with
nix.machines. E.g.
$ nix-build -A hello --argstr system x86_64-darwin \
--option builders 'root@macstadium1 x86_64-darwin'
will perform the specified build on "macstadium1".
It also removes the need for a separate nix.machines file since you
can specify builders in nix.conf directly. (In fact nix.machines is
yet another hack that predates the general nix.conf configuration
file, IIRC.)
Note: this option is supported by the daemon for trusted users. The
fact that this allows trusted users to specify paths to SSH keys to
which they don't normally have access is maybe a bit too much trust...
For backwards compatibility, if the URI is just a hostname, ssh://
(i.e. LegacySSHStore) is prepended automatically.
Also, all fields except the URI are now optional. For example, this is
a valid nix.machines file:
local?root=/tmp/nix
This is useful for testing the remote build machinery since you don't
have to mess around with ssh.
This is to simplify remote build configuration. These environment
variables predate nix.conf.
The build hook now has a sensible default (namely build-remote).
The current load is kept in the Nix state directory now.
Since build-remote uses buildDerivation() now, we don't need to copy
the .drv file anymore. This greatly reduces the set of input paths
copied to the remote side (e.g. from 392 to 51 store paths for GNU
hello on x86_64-darwin).
The typical use is to inherit Config and add Setting<T> members:
class MyClass : private Config
{
Setting<int> foo{this, 123, "foo", "the number of foos to use"};
Setting<std::string> bar{this, "blabla", "bar", "the name of the bar"};
MyClass() : Config(readConfigFile("/etc/my-app.conf"))
{
std::cout << foo << "\n"; // will print 123 unless overriden
}
};
Currently, this is used by Store and its subclasses for store
parameters. You now get a warning if you specify a non-existant store
parameter in a store URI.
This fixes "No such file or directory" when opening /dev/ptmx
(e.g. http://hydra.nixos.org/build/51094249).
The reason appears to be some changes to /dev/ptmx / /dev/pts handling
between Linux 4.4 and 4.9. See
https://patchwork.kernel.org/patch/7832531/.
The fix is to go back to mounting a proper /dev/pts instance inside
the sandbox. Happily, this now works inside user namespaces, even for
unprivileged users. So
NIX_REMOTE=local?root=/tmp/nix nix-build \
'<nixpkgs/nixos/tests/misc.nix>' -A test
works for non-root users.
The downside is that the fix breaks sandbox builds on older kernels
(probably pre-4.6), since mounting a devpts fails inside user
namespaces for some reason I've never been able to figure out. Builds
on those systems will fail with
error: while setting up the build environment: mounting /dev/pts: Invalid argument
Ah well.
This allows various Store implementations to provide different ways to
get build logs. For example, BinaryCacheStore can get the build logs
from the binary cache.
Also, remove the log-servers option since we can use substituters for
this.
Previously, the Settings class allowed other code to query for string
properties, which led to a proliferation of code all over the place making
up new options without any sort of central registry of valid options. This
commit pulls all those options back into the central Settings class and
removes the public get() methods, to discourage future abuses like that.
Furthermore, because we know the full set of options ahead of time, we
now fail loudly if someone enters an unrecognized option, thus preventing
subtle typos. With some template fun, we could probably also dump the full
set of options (with documentation, defaults, etc.) to the command line,
but I'm not doing that yet here.
This allows <nix/fetchurl.nix> to fetch private Git/Mercurial
repositories, e.g.
import <nix/fetchurl.nix> {
url = https://edolstra@bitbucket.org/edolstra/my-private-repo/get/80a14018daed.tar.bz2;
sha256 = "1mgqzn7biqkq3hf2697b0jc4wabkqhmzq2srdymjfa6sb9zb6qs7";
}
where /etc/nix/netrc contains:
machine bitbucket.org
login edolstra
password blabla...
This works even when sandboxing is enabled.
To do: add unpacking support (i.e. fetchzip functionality).
Because config.h can #define things like _FILE_OFFSET_BITS=64 and not
every compilation unit includes config.h, we currently compile half of
Nix with _FILE_OFFSET_BITS=64 and other half with _FILE_OFFSET_BITS
unset. This causes major havoc with the Settings class on e.g. 32-bit ARM,
where different compilation units disagree with the struct layout.
E.g.:
diff --git a/src/libstore/globals.cc b/src/libstore/globals.cc
@@ -166,6 +166,8 @@ void Settings::update()
_get(useSubstitutes, "build-use-substitutes");
+ fprintf(stderr, "at Settings::update(): &useSubstitutes = %p\n", &nix::settings.useSubstitutes);
_get(buildUsersGroup, "build-users-group");
diff --git a/src/libstore/remote-store.cc b/src/libstore/remote-store.cc
+++ b/src/libstore/remote-store.cc
@@ -138,6 +138,8 @@ void RemoteStore::initConnection(Connection & conn)
void RemoteStore::setOptions(Connection & conn)
{
+ fprintf(stderr, "at RemoteStore::setOptions(): &useSubstitutes = %p\n", &nix::settings.useSubstitutes);
conn.to << wopSetOptions
Gave me:
at Settings::update(): &useSubstitutes = 0xb6e5c5cb
at RemoteStore::setOptions(): &useSubstitutes = 0xb6e5c5c7
That was not a fun one to debug!
Linus Heckemann
Jörg Thalheim