I guess I misunderstood John's initial explanation about why wildcards
for outputs are sent to older stores[1]. My `nix-daemon` from 2021-03-26
also has version 1.29, but misses the wildcard[2]. So bumping seems to
be the right call.
[1] https://github.com/NixOS/nix/pull/4759#issuecomment-830812464
[2] 255d145ba7
Starting in macOS 11, the on-disk dylib bundles are no longer available,
but nixpkgs needs to be able to keep compatibility with older versions
that require `/usr/lib/libSystem.B.dylib` in `__impureHostDeps`. Allow
it to keep backwards compatibility with these versions by marking these
dependencies as optional.
Fixes#4658.
As described in #4745 it's otherwise fairly hard to understand where
this is coming from. Say you have an expression which uses e.g.
`types.package`:
``` nix
{ outputs = { self, nixpkgs }: {
packages.x86_64-linux.hello = let
foo = nixpkgs.lib.evalModules {
modules = [
{
options.foo.bar = with nixpkgs.lib; mkOption { type = types.package; };
}
{
foo.bar = ./.;
}
];
};
in builtins.trace foo.config.foo.bar.outPath nixpkgs.legacyPackages.x86_64-linux.hello;
defaultPackage.x86_64-linux = self.packages.x86_64-linux.hello;
};
}
```
Then you'll get an error trace like this:
```
error: 'builtins.storePath' is not allowed in pure evaluation mode
at /nix/store/p4h2x6r80njkb0j2rc1xjhhl99yri3zb-source/lib/attrsets.nix:328:15:
327| let
328| path' = builtins.storePath path;
| ^
329| res =
… while evaluating the attribute 'config.foo.bar.outPath'
at /nix/store/p4h2x6r80njkb0j2rc1xjhhl99yri3zb-source/lib/attrsets.nix:332:11:
331| name = sanitizeDerivationName (builtins.substring 33 (-1) (baseNameOf path'));
332| outPath = path';
| ^
333| outputs = [ "out" ];
… while evaluating the attribute 'packages.x86_64-linux.hello'
at /nix/store/6c1rfsqzrhjw1235palzjmf5vihcpci7-source/flake.nix:3:5:
2| { outputs = { self, nixpkgs }: {
3| packages.x86_64-linux.hello = let
| ^
4| foo = nixpkgs.lib.evalModules {
```
Fixes#4745
They are equivalent according to
<https://spec.commonmark.org/0.29/#hard-line-breaks>,
and the trailing spaces tend to be a pain (because the make git
complain, editors tend to want to remove them − the `.editorconfig`
actually specifies that − etc..).
This function doesn't support all compression methods (i.e. 'none' and
'br') so it shouldn't be exposed.
Also restore the original decompress() as a wrapper around
makeDecompressionSink().
The S3 store relies on the ability to be able to decompress things with
an empty method, because it just passes the value of the Content-Encoding
directly to decompress.
If the file is not compressed, then this will cause the compression
routine to get confused.
This caused NixOS/nixpkgs#120120.
This makes Nix look up paths derivations when they are passed as a
store paths. So:
$ nix path-info --derivation /nix/store/0pisd259nldh8yfjvw663mspm60cn5v8-hello-2.10
now gives
/nix/store/qp724w90516n4bk5r9gfb37vzmqdh3z7-hello-2.10.drv
instead of "".
If no deriver is available, Nix now errors instead of silently
ignoring that argument.
In case of pure input-addressed derivations, the build loop doesn't
guaranty that the realisations are stored in the db (if the output paths
are already there or can be substituted, the realisations won't be
registered). This caused `nix shell` to fail in some cases because it
was assuming that the realisations were always existing.
A better (but more involved) fix would probably to ensure that we always
register the realisations, but in the meantime this patches the surface
issue.
Fix#4721
I think that it's not very helpful to get "cached failures" in a wrong
`flake.nix`. This can be very confusing when debugging a Nix expression.
See for instance NixOS/nixpkgs#118115.
In fact, the eval cache allows a forced reevaluation which is used for
e.g. `nix eval`.
This change makes sure that this is the case for `nix build` as well. So
rather than
λ ma27 [~/Projects/exp] → ../nix/outputs/out/bin/nix build -L --rebuild --experimental-features 'nix-command flakes'
error: cached failure of attribute 'defaultPackage.x86_64-linux'
the evaluation of already-evaluated (and failed) attributes looks like
this now:
λ ma27 [~/Projects/exp] → ../nix/outputs/out/bin/nix build -L --rebuild --experimental-features 'nix-command flakes'
error: attribute 'hell' missing
at /nix/store/mrnvi9ss8zn5wj6gpn4bcd68vbh42mfh-source/flake.nix:6:35:
5|
6| packages.x86_64-linux.hello = nixpkgs.legacyPackages.x86_64-linux.hell;
| ^
7|
(use '--show-trace' to show detailed location information)
When working on some more complex Nix code, there are sometimes rather
unhelpful or misleading error messages, especially if coerce-errors are
thrown.
This patch is a first steps towards improving that. I'm happy to file
more changes after that, but I'd like to gather some feedback first.
To summarize, this patch does the following things:
* Attrsets (a.k.a. `Bindings` in `libexpr`) now have a `Pos`. This is
helpful e.g. to identify which attribute-set in `listToAttrs` is
invalid.
* The `Value`-struct has a new method named `determinePos` which tries
to guess the position of a value and falls back to a default if that's
not possible.
This can be used to provide better messages if a coercion fails.
* The new `determinePos`-API is used by `builtins.concatMap` now. With
that change, Nix shows the exact position in the error where a wrong
value was returned by the lambda.
To make sure it's still obvious that `concatMap` is the problem,
another stack-frame was added.
* The changes described above can be added to every other `primop`, but
first I'd like to get some feedback about the overall approach.
* The position of the `name`-attribute appears in the trace.
* If e.g. `meta` has no `outPath`-attribute, a `cannot coerce set to
string` error will be thrown where `pos` points to `name =` which is
highly misleading.
If there were many top-level goals (which are not destroyed until the
very end), commands like
$ nix copy --to 'ssh://localhost?remote-store=/tmp/nix' \
/run/current-system --no-check-sigs --substitute-on-destination
could fail with "Too many open files". So now we do some explicit
cleanup from amDone(). It would be cleaner to separate goals from
their temporary internal state, but that would be a bigger refactor.
This avoids an ambiguity where the `StorePathWithOutputs { drvPath, {}
}` could mean "build `brvPath`" or "substitute `drvPath`" depending on
context.
It also brings the internals closer in line to the new CLI, by
generalizing the `Buildable` type is used there and makes that
distinction already.
In doing so, relegate `StorePathWithOutputs` to being a type just for
backwards compatibility (CLI and RPC).
These are by no means part of the notion of a store, but rather are
things that happen to use stores. (Or put another way, there's no way
we'd make them virtual methods any time soon.) It's better to move them
out of that too-big class then.
Also, this helps us remove StorePathWithOutputs from the Store interface
altogether next commit.
This fixes builtins.fetchGit { url = ...; ref = "HEAD"; }, that works in
stable nix (v2.3.10), but is broken in nix master:
$ ./result/bin/nix repl
Welcome to Nix version 2.4pre19700101_dd77f71. Type :? for help.
nix-repl> builtins.fetchGit { url = "https://github.com/NixOS/nix"; ref = "HEAD"; }
fetching Git repository 'https://github.com/NixOS/nix'fatal: couldn't find remote ref refs/heads/HEAD
error: program 'git' failed with exit code 128
The documentation for builtins.fetchGit says ref = "HEAD" is the
default, so it should also be supported to explicitly pass it.
I came across this issue because poetry2nix can use ref = "HEAD" in some
situations.
Fixes#4674.
A few versioning mistakes were corrected:
- In 27b5747ca7, Daemon protocol had some
version `>= 0xc` that should have been `>= 0x1c`, or `28` since the
other conditions used decimal.
- In a2b69660a9, legacy SSH gated new CAS
info on version 6, but version 5 in the server. It is now 6
everywhere.
Additionally, legacy ssh was sending over more metadata than the daemon
one was. The daemon now sends that data too.
CC @regnat
Co-authored-by: Cole Helbling <cole.e.helbling@outlook.com>
According to RFC4007[1], IPv6 addresses can have a so-called zone_id
separated from the actual address with `%` as delimiter. In contrast to
Nix 2.3, the version on `master` doesn't recognize it as such:
$ nix ping-store --store ssh://root@fe80::1%18 --experimental-features nix-command
warning: 'ping-store' is a deprecated alias for 'store ping'
error: --- Error ----------------------------------------------------------------- nix
don't know how to open Nix store 'ssh://root@fe80::1%18'
I modified the IPv6 match-regex accordingly to optionally detect this
part of the address. As we don't seem to do anything special with it, I
decided to leave it as part of the URL for now.
Fixes#4490
[1] https://tools.ietf.org/html/rfc4007
I guess the rationale behind the old name wath that
`pathInfoIsTrusted(info)` returns `true` iff we would need to `blindly`
trust the path (because it has no valid signature and `requireSigs` is
set), but I find it to be a really confusing footgun because it's quite
natural to give it the opposite meaning.
When starting a nix-shell with `-i` it was previously possible for it to
silently fail in the scenario where the specified interpreter didn't
exist. This happened due to the `exec` call masking the issue.
With this change we enable `execfail`, which causes the script using
`nix-shell` as interpreter to correctly exit with code 127.
Fixes: #4598
Basically, if a tarball URL is used as a flake input, and the URL leads
to a redirect, the final redirect destination would be recorded as the
locked URL.
This allows tarballs under https://nixos.org/channels to be used as
flake inputs. If we, as before, lock on to the original URL it would
break every time the channel updates.
Local git repositories are normally used directly instead of
cloning. This commit checks if a repo is bare and forces a
clone.
Co-authored-by: Théophane Hufschmitt <regnat@users.noreply.github.com>
What happened was that Nix was trying to unconditionally mount these
paths in fixed-output derivations, but since the outer derivation was
pure, those paths did not exist. The solution is to only mount those
paths when they exist.
This separates the scheduling logic (including simple hook pathway) from
the local-store needing code.
This should be the final split for now. I'm reasonably happy with how
it's turning out, even before I'm done moving code into
`local-derivation-goal`. Benefits:
1. This will help "witness" that the hook case is indeed a lot simpler,
and also compensate for the increased complexity that comes from
content-addressed derivation outputs.
2. It also moves us ever so slightly towards a world where we could use
off-the-shelf storage or sandboxing, since `local-derivation-goal`
would be gutted in those cases, but `derivation-goal` should remain
nearly the same.
The new `#if 0` in the new files will be deleted in the following
commit. I keep it here so if it turns out more stuff can be moved over,
it's easy to do so in a way that preserves ordering --- and thus
prevents conflicts.
N.B.
```sh
git diff HEAD^^ --color-moved --find-copies-harder --patience --stat
```
makes nicer output.
This is probably what most people expect it to do. Fixes#3781.
There is a new command 'nix flake lock' that has the old behaviour of
'nix flake update', i.e. it just adds missing lock file entries unless
overriden using --update-input.
This is already used by Hydra, and is very useful when materializing
a remote builder list from service discovery. This allows the service
discovery tool to only sync one file instead of two.
This is technically a breaking change, since attempting to set plugin
files after the first non-flag argument will now throw an error. This
is acceptable given the relative lack of stability in a plugin
interface and the need to tie the knot somewhere once plugins can
actually define new subcommands.
This field used to be a `BasicDerivation`, but this `BasicDerivation`
was downcasted to a `Derivation` when needed (implicitely or not), so we
might as well make it a full `Derivation` and upcast it when needed.
This also allows getting rid of a weird duplication in the way we
compute the static output hashes for the derivation. We had to
do it differently and in a different place depending on whether the
derivation was a full derivation or just a basic drv, but we can now do
it unconditionally on the full derivation.
Fix#4559
- Pass it the name of the outputs rather than their output paths (as
these don't exist for ca derivations)
- Get the built output paths from the remote builder
- Register the new received realisations
The PR #4240 changed messag of the error that was thrown when an auto-called
function was missing an argument.
However this change also changed the type of the error, from `EvalError`
to a new `MissingArgumentError`. This broke hydra which was relying on
an `EvalError` being thrown.
Make `MissingArgumentError` a subclass of `EvalError` to un-break hydra.
When performing distributed builds of machine learning packages, it
would be nice if builders without the required SIMD instructions can
be excluded as build nodes.
Since x86_64 has accumulated a large number of different instruction
set extensions, listing all possible extensions would be unwieldy.
AMD, Intel, Red Hat, and SUSE have recently defined four different
microarchitecture levels that are now part of the x86-64 psABI
supplement and will be used in glibc 2.33:
https://gitlab.com/x86-psABIs/x86-64-ABIhttps://lwn.net/Articles/844831/
This change uses libcpuid to detect CPU features and then uses them to
add the supported x86_64 levels to the additional system types. For
example on a Ryzen 3700X:
$ ~/aps/bin/nix -vv --version | grep "Additional system"
Additional system types: i686-linux, x86_64-v1-linux, x86_64-v2-linux, x86_64-v3-linux
That way we
1. Don't have to recompute them several times
2. Can compute them in a place where we know the type of the parent
derivation, meaning that we don't need the casting dance we had before
Once a build is done, get back to the original derivation, and register
all the newly built outputs for this derivation.
This allows Nix to work properly with derivations that don't have all
their build inputs available − thus allowing garbage collection and
(once it's implemented) binary substitution
Change the `nix-build` logic for linking/printing the output paths to allow for
some outputs to be missing. This might happen when the toplevel
derivation didn't have to be built, either because all the required
outputs were already there, or because they have all been substituted.
Maximilian Bosch
Luke Granger-Brown
Alyssa Ross
Samuel Dionne-Riel
Robert Hensing
Yorick