Previously you had to remember to call value->attrs->sort() after
populating value->attrs. Now there is a BindingsBuilder helper that
wraps Bindings and ensures that sort() is called before you can use
it.
nixpkgs can save a good bit of eval memory with this primop. zipAttrsWith is
used quite a bit around nixpkgs (eg in the form of recursiveUpdate), but the
most costly application for this primop is in the module system. it improves
the implementation of zipAttrsWith from nixpkgs by not checking an attribute
multiple times if it occurs more than once in the input list, allocates less
values and set elements, and just avoids many a temporary object in general.
nixpkgs has a more generic version of this operation, zipAttrsWithNames, but
this version is only used once so isn't suitable for being the base of a new
primop. if it were to be used more we should add a second primop instead.
When we check for disappeared overrides, we can get "false positives"
for follows and overrides which are defined in the dependencies of the
flake we are locking, since they are not parsed by
parseFlakeInputs. However, at that point we already know that the
overrides couldn't have possible been changed if the input itself
hasn't changed (since we check that oldLock->originalRef == *input.ref
for the input's parent). So, to prevent this, only perform this check
when it was possible that the flake changed (e.g. the flake we're
locking, or a new input, or the input has changed and mustRefetch ==
true).
This makes sure that values parsed from TOML have a proper size. Using
e.g. `double` caused issues on i686 where the size of `double` (32bit)
was too small to accommodate some values.
This was already accidentally disabled in ba87b08. It also no longer
appears to be beneficial, and in fact slow things down, e.g. when
evaluating a NixOS system configuration:
elapsed time: median = 3.8170 mean = 3.8202 stddev = 0.0195 min = 3.7894 max = 3.8600 [rejected, p=0.00000, Δ=0.36929±0.02513]
calling GC_malloc for each value is significantly more expensive than
allocating a bunch of values at once with GC_malloc_many. "a bunch" here
is a GC block size, ie 16KiB or less.
this gives a 1.5% performance boost when evaluating our nixos system.
tested with
nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
# on master
Time (mean ± σ): 3.335 s ± 0.007 s [User: 2.774 s, System: 0.293 s]
Range (min … max): 3.315 s … 3.347 s 50 runs
# with this change
Time (mean ± σ): 3.288 s ± 0.006 s [User: 2.728 s, System: 0.292 s]
Range (min … max): 3.274 s … 3.307 s 50 runs
Add a `_NIX_TRACE_BUILT_OUTPUTS` environment variable that can be set to
a filename in which the result of each build will be logged.
This is intentionally crude and undocumented as it’s only meant to be a
temporary thing to assess the usefulness of CA derivations.
Any other use would need a cleaner re-implementation first.
Make the build of unresolved derivations return the same status as the
resolved one, except in the case of an `AlreadyValid` in which case it
will return `ResolvesToAlreadyValid` to mean that the outputs of the unresolved
derivation weren’t known, but the resolved one is.
When a variable is assigned in the REPL, make sure to remove any possible reference to the old one so that we correctly pick the new one afterwards
Fix#5706
I downloaded Nix tonight, and immediately broke it by accidentally removing the default binary caching.
After figuring this out, I also failed to fix it properly, due to using the wrong key for Nix's default binary cache
If the diagnostic message would have been clearer about what/where a "signature" for a "substituter" is + comes from, it probably would have saved me a few hours.
Maybe we can save other noobs the same pain?
Before this change, stdout was closed after the pager exits. This is
fine for non-interactive commands where we want to exit right after
the pager exits anyways, but for interactive things (e.g. nix repl)
this breaks the output after we quit the pager.
Keep the initial stdout fd as part of RunPager, and restore it in
RunPager::~RunPager using dup2.
This function is very useful in nixpkgs, but its implementation in Nix
itself is rather slow due to it requiring a lot of attribute set and
list appends.
Previously, when we were attempting to reuse the old lockfile
information in the computeLocks function, we have passed the parent of
the current input to the next computeLocks call. This was incorrect,
since the follows are resolved relative to the parent. This caused
issues when we tried to reuse oldLock but couldn't for some
reason (read: mustRefetch is true), in that case the follows were
resolved incorrectly.
Fix this by passing the correct parent, and adding some tests to
prevent this particular regression from happening again.
Closes https://github.com/NixOS/nix/issues/5697
- Previous to this commit the boundary was exclusive of the
top level flake.
- This is wrong since the top level flake is still a valid
relative reference.
- Now, the check boundary is inclusive of the top level flake.
Signed-off-by: Timothy DeHerrera <tim.deh@pm.me>
Due to missing <atomic> declaration the build fails as:
src/libutil/util.hh:350:24: error: no match for 'operator||' (operand types are 'std::atomic<bool>' and 'bool')
350 | if (_isInterrupted || (interruptCheck && interruptCheck()))
| ~~~~~~~~~~~~~~ ^~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| | |
| std::atomic<bool> bool
Because the manual is generated from default values which are themselves
generated from various sources (cpuid, bios settings (kvm), number of
cores). This commit hides non-reproducible settings from the manual
output.
No matter what, we need to resize the buffer to not have any scratch
space after we do the `read`. In the end of file case, `got` will be 0
from it's initial value.
Before, we forgot to resize in the EOF case with the break. Yes, we know
we didn't recieve any data in that case, but we still have the scatch
space to undo.
Co-Authored-By: Will Fancher <Will.Fancher@Obsidian.Systems>
This doesn't fix the bug, but makes the code less difficult to read.
Also improve the comments, now that it is clear what part is needed in
each code path.
Moving arguments of the primOp into the registration structure makes it
impossible to initialize a second EvalState with the correct primOp
registration. It will end up registering all those "RegisterPrimOp"'s
with an arity of zero on all but the 2nd instance of the EvalState.
Not moving the memory will add a tiny bit of memory overhead during the
eval since we need a copy of all the argument lists of all the primOp's.
The overhead shouldn't be too bad as it is static (based on the amonut
of registered operations) and only occurs once during the interpreter
startup.
If we’re in pure eval mode, then tell that in the error message rather
than (wrongly) speaking about restricted mode.
Fix https://github.com/NixOS/nix/issues/5611
We let DISPLAY (X11) through, so we should let the Wayland equivalents
through as well. Similarly, we let HOME through, so it should be okay
to allow XDG_RUNTIME_DIR (which is needed for connecting to Wayland
with WAYLAND_DISPLAY) through as well. Otherwise graphical
applications will either fall back to X11 (if they support it), or
just not work (if they don't).
This is not really useful on its own, but it does recover the
'infinite recursion' error message for '{ __functor = x: x; } 1', and
is more efficient in conjunction with #3718.
Fixes#5515.
- This change applies to builtins.toXML and inner workings
- Proof of concept:
```nix
let e = builtins.toXML e; in e
```
- Before:
```
$ nix-instantiate --eval poc.nix
error: infinite recursion encountered
```
- After:
```
$ nix-instantiate --eval poc.nix
error: infinite recursion encountered
at /data/github/kamadorueda/nix/poc.nix:1:9:
1| let e = builtins.toXML e; in e
|
```
These headers are included by the libexpr, libfetchers, libstore
and libutil headers.
Considering that these are vendored sources, Nix should expose them,
as it is not a good idea for reverse dependencies to rely on a
potentially different source that can go out of sync.
When an input follows disappears, we can't just reuse the old lock
file entries since we may be missing some required ones. Refetch the
input when this happens.
Closes https://github.com/NixOS/nix/issues/5289
For a typical desktop system (~2K packages) we can easily get 100K
entries in RealisationsRefs. Without indices query for RealisationsRefs
requires linear scan.
RealisationsRefs(referrer)
--------------------------
Inefficiency is seen as a 100% CPU load of nix-daemon for the following
scenario:
$ nix edit -f . bash # add unused environment variable, like FOO="1"
# populate RealisationsRefs, build fresh system
$ nix build -f nixos system --arg config '{ contentAddressedByDefault = true; }'
$ nix edit -f . bash # add unused environment variable, like FOO="2"
$ time nix build -f nixos system --arg config '{ contentAddressedByDefault = true; }'
In this case `bash `will be rebuilt a few times and then rest of CPU
time is spent on scanning RealisationsRefs table (about 5 CPU-minutes
on my machine).
Before the change:
$ time nix build -f nixos system ... # step 4 above
real 34m3,613s
user 0m5,232s
sys 0m0,758s
Of all this time about 29.5 minutes are taken by nix-daemon's CPU time.
After the change:
$ time nix build -f nixos system ... # step 4 above
real 4m50,061s
user 0m5,038s
sys 0m0,677s
Of all this time about 1 minute is taken by nix-daemon's CPU time.
Most of the time is spent polling for non-existent realisations on
cache-nixos.org.
Realisations(outputPath)
------------------------
After running CA system for two weeks I got ~1M entries in Realisations
table. `nix-collect-garbage` became very slow (seemingly 100 path deletions
per second). It happens due to a slow cascading delete from Realisations
triggered by deletion from ValidPaths.
The fix is to add an index on primary key from ValidPaths(id) that
triggers cascading deletions.
Before the change:
$ time nix-collect-garbage -d --max-freed 100G
<interrupted before finish, took too long>
real 23m32.411s
user 17m49.679s
sys 4m50.609s
Most of time was spent in re-scanning Realisations table on each path deletion.
After the change:
$ time nix-collect-garbage -d --max-freed 100G
real 8m43.226s
user 6m16.317s
sys 1m40.188s
Time is spent scanning sqlite indices and in kernel when unlinking directories.
Doing it as a side-effect of calling LocalStore::makeStoreWritable()
is very ugly.
Also, make sure that stopping the progress bar joins the update
thread, otherwise that thread should be unshared as well.
Since 4806f2f6b0, we can't have paths with
references passed to builtins.{path,filterSource}. This prevents many cases
of those functions called on IFD outputs from working. Resolve this by
passing the references found in the original path to the added path.
When setting flake-local options (with the `nixConfig` field), forward
these options to the daemon in case we’re using one.
This is necessary in particular for options like `binary-caches` or
`post-build-hook` to make sense.
Fix <343239fc8a (r44356843)>
When running a `:b` command in the repl, after building the derivations
query the store for its outputs rather than just assuming that they are
known in the derivation itself (which isn’t true for CA derivations)
Fix#5328
We now parse function applications as a vector of arguments rather
than as a chain of binary applications, e.g. 'substring 1 2 "foo"' is
parsed as
ExprCall { .fun = <substring>, .args = [ <1>, <2>, <"foo"> ] }
rather than
ExprApp (ExprApp (ExprApp <substring> <1>) <2>) <"foo">
This allows primops to be called immediately (if enough arguments are
supplied) without having to allocate intermediate tPrimOpApp values.
On
$ nix-instantiate --dry-run '<nixpkgs/nixos/release-combined.nix>' -A nixos.tests.simple.x86_64-linux
this gives a substantial performance improvement:
user CPU time: median = 0.9209 mean = 0.9218 stddev = 0.0073 min = 0.9086 max = 0.9340 [rejected, p=0.00000, Δ=-0.21433±0.00677]
elapsed time: median = 1.0585 mean = 1.0584 stddev = 0.0024 min = 1.0523 max = 1.0623 [rejected, p=0.00000, Δ=-0.20594±0.00236]
because it reduces the number of tPrimOpApp allocations from 551990 to
42534 (i.e. only small minority of primop calls are partially
applied) which in turn reduces time spent in the garbage collector.
Lily Foster
Yorick
Sergei Trofimovich
Alex Kladov
Las Safin
Alyssa Ross
kloenk
Samuel Dionne-Riel
Robert Hensing