vriska/hydra
0
0
Fork 0
forked from lix-project/hydra
Code Pull requests Activity

Remove old files

Browse source
This commit is contained in:
Ismaël Bouya 2021-02-24 01:07:11 +01:00
parent 9d916877fb
commit bd64b2481d
No known key found for this signature in database
GPG key ID: FD1D4EF57FA95902
7 changed files with 0 additions and 1740 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

334
doc/manual/api.xml
View file

@ -1,334 +0,0 @@
<chapter xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
xml:id="chap-api">
<title>Using the external API</title>
<para>
To be able to create integrations with other services, Hydra exposes
an external API that you can manage projects with.
</para>
<para>
The API is accessed over HTTP(s) where all data is sent and received
as JSON.
</para>
<para>
Creating resources requires the caller to be authenticated, while
retrieving resources does not.
</para>
<para>
The API does not have a separate URL structure for it's endpoints.
Instead you request the pages of the web interface as
<literal>application/json</literal> to use the API.
</para>
<section>
<title>List projects</title>
<para>
To list all the <literal>projects</literal> of the Hydra install:
</para>
<programlisting>
GET /
Accept: application/json
</programlisting>
<para>
This will give you a list of <literal>projects</literal>, where each
<literal>project</literal> contains general information and a list
of its <literal>job sets</literal>.
</para>
<para>
<emphasis role="strong">Example</emphasis>
</para>
<programlisting>
curl -i -H 'Accept: application/json' \
https://hydra.nixos.org
</programlisting>
<para>
<emphasis role="strong">Note:</emphasis> this response is truncated
</para>
<programlisting>
GET https://hydra.nixos.org/
HTTP/1.1 200 OK
Content-Type: application/json
[
{
"displayname": "Acoda",
"name": "acoda",
"description": "Acoda is a tool set for automatic data migration along an evolving data model",
"enabled": 0,
"owner": "sander",
"hidden": 1,
"jobsets": [
"trunk"
]
},
{
"displayname": "cabal2nix",
"name": "cabal2nix",
"description": "Convert Cabal files into Nix build instructions",
"enabled": 0,
"owner": "simons@cryp.to",
"hidden": 1,
"jobsets": [
"master"
]
}
]
</programlisting>
</section>
<section>
<title>Get a single project</title>
<para>
To get a single <literal>project</literal> by identifier:
</para>
<programlisting>
GET /project/:project-identifier
Accept: application/json
</programlisting>
<para>
<emphasis role="strong">Example</emphasis>
</para>
<programlisting>
curl -i -H 'Accept: application/json' \
https://hydra.nixos.org/project/hydra
</programlisting>
<programlisting>
GET https://hydra.nixos.org/project/hydra
HTTP/1.1 200 OK
Content-Type: application/json
{
"description": "Hydra, the Nix-based continuous build system",
"hidden": 0,
"displayname": "Hydra",
"jobsets": [
"hydra-master",
"hydra-ant-logger-trunk",
"master",
"build-ng"
],
"name": "hydra",
"enabled": 1,
"owner": "eelco"
}
</programlisting>
</section>
<section>
<title>Get a single job set</title>
<para>
To get a single <literal>job set</literal> by identifier:
</para>
<programlisting>
GET /jobset/:project-identifier/:jobset-identifier
Content-Type: application/json
</programlisting>
<para>
<emphasis role="strong">Example</emphasis>
</para>
<programlisting>
curl -i -H 'Accept: application/json' \
https://hydra.nixos.org/jobset/hydra/build-ng
</programlisting>
<programlisting>
GET https://hydra.nixos.org/jobset/hydra/build-ng
HTTP/1.1 200 OK
Content-Type: application/json
{
"errormsg": "evaluation failed due to signal 9 (Killed)",
"fetcherrormsg": null,
"nixexprpath": "release.nix",
"nixexprinput": "hydraSrc",
"emailoverride": "rob.vermaas@gmail.com, eelco.dolstra@logicblox.com",
"jobsetinputs": {
"officialRelease": {
"jobsetinputalts": [
"false"
]
},
"hydraSrc": {
"jobsetinputalts": [
"https://github.com/NixOS/hydra.git build-ng"
]
},
"nixpkgs": {
"jobsetinputalts": [
"https://github.com/NixOS/nixpkgs.git release-14.12"
]
}
},
"enabled": 0
}
</programlisting>
</section>
<section>
<title>List evaluations</title>
<para>
To list the <literal>evaluations</literal> of a
<literal>job set</literal> by identifier:
</para>
<programlisting>
GET /jobset/:project-identifier/:jobset-identifier/evals
Content-Type: application/json
</programlisting>
<para>
<emphasis role="strong">Example</emphasis>
</para>
<programlisting>
curl -i -H 'Accept: application/json' \
https://hydra.nixos.org/jobset/hydra/build-ng/evals
</programlisting>
<para>
<emphasis role="strong">Note:</emphasis> this response is truncated
</para>
<programlisting>
GET https://hydra.nixos.org/jobset/hydra/build-ng/evals
HTTP/1.1 200 OK
Content-Type: application/json
{
"evals": [
{
"jobsetevalinputs": {
"nixpkgs": {
"dependency": null,
"type": "git",
"value": null,
"uri": "https://github.com/NixOS/nixpkgs.git",
"revision": "f60e48ce81b6f428d072d3c148f6f2e59f1dfd7a"
},
"hydraSrc": {
"dependency": null,
"type": "git",
"value": null,
"uri": "https://github.com/NixOS/hydra.git",
"revision": "48d6f0de2ab94f728d287b9c9670c4d237e7c0f6"
},
"officialRelease": {
"dependency": null,
"value": "false",
"type": "boolean",
"uri": null,
"revision": null
}
},
"hasnewbuilds": 1,
"builds": [
24670686,
24670684,
24670685,
24670687
],
"id": 1213758
}
],
"first": "?page=1",
"last": "?page=1"
}
</programlisting>
</section>
<section>
<title>Get a single build</title>
<para>
To get a single <literal>build</literal> by its id:
</para>
<programlisting>
GET /build/:build-id
Content-Type: application/json
</programlisting>
<para>
<emphasis role="strong">Example</emphasis>
</para>
<programlisting>
curl -i -H 'Accept: application/json' \
https://hydra.nixos.org/build/24670686
</programlisting>
<programlisting>
GET /build/24670686
HTTP/1.1 200 OK
Content-Type: application/json
{
"job": "tests.api.x86_64-linux",
"jobsetevals": [
1213758
],
"buildstatus": 0,
"buildmetrics": null,
"project": "hydra",
"system": "x86_64-linux",
"priority": 100,
"releasename": null,
"starttime": 1439402853,
"nixname": "vm-test-run-unnamed",
"timestamp": 1439388618,
"id": 24670686,
"stoptime": 1439403403,
"jobset": "build-ng",
"buildoutputs": {
"out": {
"path": "/nix/store/lzrxkjc35mhp8w7r8h82g0ljyizfchma-vm-test-run-unnamed"
}
},
"buildproducts": {
"1": {
"path": "/nix/store/lzrxkjc35mhp8w7r8h82g0ljyizfchma-vm-test-run-unnamed",
"defaultpath": "log.html",
"type": "report",
"sha256hash": null,
"filesize": null,
"name": "",
"subtype": "testlog"
}
},
"finished": 1
}
</programlisting>
</section>
</chapter>
<!--
Local Variables:
indent-tabs-mode: nil
ispell-local-dictionary: "american"
End:
-->

196
doc/manual/declarative-projects.xml
View file

@ -1,196 +0,0 @@
<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xml:id="sec-declarative-projects">
<title>Declarative projects</title>
<para>
Hydra supports declaratively configuring a project's jobsets. This
configuration can be done statically, or generated by a build job.
</para>
<note><para>
Hydra will treat the project's declarative input as a static definition
if and only if the spec file contains a dictionary of dictionaries.
If the value of any key in the spec is not a dictionary, it will
treat the spec as a generated declarative spec.
</para></note>
<section xml:id="sec-static-declarative-projects">
<title>Static, Declarative Projects</title>
<para>
Hydra supports declarative projects, where jobsets are configured
from a static JSON document in a repository.
</para>
<para>
To configure a static declarative project, take the following steps:
</para>
<orderedlist numeration="arabic" spacing="compact">
<listitem>
<para>
Create a Hydra-fetchable source like a Git repository or local path.
</para>
</listitem>
<listitem>
<para>
In that source, create a file called <filename>spec.json</filename>,
and add the specification for all of the jobsets. Each key is jobset
and each value is a jobset's specification. For example:
<programlisting language="json">
{
"nixpkgs": {
"enabled": 1,
"hidden": false,
"description": "Nixpkgs",
"nixexprinput": "nixpkgs",
"nixexprpath": "pkgs/top-level/release.nix",
"checkinterval": 300,
"schedulingshares": 100,
"enableemail": false,
"emailoverride": "",
"keepnr": 3,
"inputs": {
"nixpkgs": {
"type": "git",
"value": "git://github.com/NixOS/nixpkgs.git master",
"emailresponsible": false
}
}
},
"nixos": {
"enabled": 1,
"hidden": false,
"description": "NixOS: Small Evaluation",
"nixexprinput": "nixpkgs",
"nixexprpath": "nixos/release-small.nix",
"checkinterval": 300,
"schedulingshares": 100,
"enableemail": false,
"emailoverride": "",
"keepnr": 3,
"inputs": {
"nixpkgs": {
"type": "git",
"value": "git://github.com/NixOS/nixpkgs.git master",
"emailresponsible": false
}
}
}
}
</programlisting>
</para>
</listitem>
<listitem>
<para>
Create a new project, and set the project's declarative input type,
declarative input value, and declarative spec file to point to the
source and JSON file you created in step 2.
</para>
</listitem>
</orderedlist>
<para>
Hydra will create a special jobset named <literal>.jobsets</literal>.
When the <literal>.jobsets</literal> jobset is evaluated, this static
specification will be used for configuring the rest of the project's
jobsets.
</para>
</section>
<section xml:id="sec-generated-declarative-projects">
<title>Generated, Declarative Projects</title>
<para>
Hydra also supports generated declarative projects, where jobsets are
configured automatically from specification files instead of being
managed through the UI. A jobset specification is a JSON object
containing the configuration of the jobset, for example:
</para>
<programlisting language="json">
{
"enabled": 1,
"hidden": false,
"description": "js",
"nixexprinput": "src",
"nixexprpath": "release.nix",
"checkinterval": 300,
"schedulingshares": 100,
"enableemail": false,
"emailoverride": "",
"keepnr": 3,
"inputs": {
"src": { "type": "git", "value": "git://github.com/shlevy/declarative-hydra-example.git", "emailresponsible": false },
"nixpkgs": { "type": "git", "value": "git://github.com/NixOS/nixpkgs.git release-16.03", "emailresponsible": false }
}
}
</programlisting>
<para>
To configure a declarative project, take the following steps:
</para>
<orderedlist numeration="arabic" spacing="compact">
<listitem>
<para>
Create a jobset repository in the normal way (e.g. a git repo with
a <literal>release.nix</literal> file, any other needed helper
files, and taking any kind of hydra input), but without adding it
to the UI. The nix expression of this repository should contain a
single job, named <literal>jobsets</literal>. The output of the
<literal>jobsets</literal> job should be a JSON file containing an
object of jobset specifications. Each member of the object will
become a jobset of the project, configured by the corresponding
jobset specification.
</para>
</listitem>
<listitem>
<para>
In some hydra-fetchable source (potentially, but not necessarily,
the same repo you created in step 1), create a JSON file
containing a jobset specification that points to the jobset
repository you created in the first step, specifying any needed
inputs (e.g. nixpkgs) as necessary.
</para>
</listitem>
<listitem>
<para>
In the project creation/edit page, set declarative input type,
declarative input value, and declarative spec file to point to the
source and JSON file you created in step 2.
</para>
</listitem>
</orderedlist>
<para>
Hydra will create a special jobset named <literal>.jobsets</literal>,
which whenever evaluated will go through the steps above in reverse
order:
</para>
<orderedlist numeration="arabic" spacing="compact">
<listitem>
<para>
Hydra will fetch the input specified by the declarative input type
and value.
</para>
</listitem>
<listitem>
<para>
Hydra will use the configuration given in the declarative spec
file as the jobset configuration for this evaluation. In addition
to any inputs specified in the spec file, hydra will also pass the
<literal>declInput</literal> argument corresponding to the input
fetched in step 1.
</para>
</listitem>
<listitem>
<para>
As normal, hydra will build the jobs specified in the jobset
repository, which in this case is the single
<literal>jobsets</literal> job. When that job completes, hydra
will read the created jobset specifications and create
corresponding jobsets in the project, disabling any jobsets that
used to exist but are not present in the current spec.
</para>
</listitem>
</orderedlist>
</section>
</section>

39
doc/manual/hacking.xml
View file

@ -1,39 +0,0 @@
<appendix xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xml:id="chap-hacking">
<title>Hacking</title>
<para>This section provides some notes on how to hack on Hydra. To
get the latest version of Hydra from GitHub:
<screen>
$ git clone git://github.com/NixOS/hydra.git
$ cd hydra
</screen>
</para>
<para>To build it and its dependencies:
<screen>
$ nix-build release.nix -A build.x86_64-linux
</screen>
</para>
<para>To build all dependencies and start a shell in which all
environment variables (such as <envar>PERL5LIB</envar>) are set up so
that those dependencies can be found:
<screen>
$ nix-shell
</screen>
To build Hydra, you should then do:
<screen>
[nix-shell]$ ./bootstrap
[nix-shell]$ configurePhase
[nix-shell]$ make
</screen>
You can run the Hydra web server in your source tree as follows:
<screen>
$ ./src/script/hydra-server
</screen>
</para>
</appendix>

338
doc/manual/installation.xml
View file

@ -1,338 +0,0 @@
<chapter xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xml:id="chap-installation">
<title>Installation</title>
<para>
This chapter explains how to install Hydra on your own build farm server.
</para>
<section>
<title>Prerequisites</title>
<para>
To install and use Hydra you need to have installed the following dependencies:
<itemizedlist>
<listitem><para>Nix</para></listitem>
<listitem><para>PostgreSQL</para></listitem>
<listitem><para>many Perl packages, notably Catalyst, EmailSender,
and NixPerl (see the <link
xlink:href="https://github.com/NixOS/hydra/blob/master/release.nix">Hydra
expression in Nixpkgs</link> for the complete
list)</para></listitem>
</itemizedlist>
At the moment, Hydra runs only on GNU/Linux
(<emphasis>i686-linux</emphasis> and
<emphasis>x86_64_linux</emphasis>).
</para>
<para>
For small projects, Hydra can be run on any reasonably modern
machine. For individual projects you can even run Hydra on a
laptop. However, the charm of a buildfarm server is usually that
it operates without disturbing the developer's working
environment and can serve releases over the internet. In
conjunction you should typically have your source code
administered in a version management system, such as
subversion. Therefore, you will probably want to install a
server that is connected to the internet. To scale up to large
and/or many projects, you will need at least a considerable
amount of diskspace to store builds. Since Hydra can schedule
multiple simultaneous build jobs, it can be useful to have a
multi-core machine, and/or attach multiple build machines in a
network to the central Hydra server.
</para>
<para>
Of course we think it is a good idea to use the <link
xlink:href="http://nixos.org/nixos">NixOS</link> GNU/Linux
distribution for your buildfarm server. But this is not a
requirement. The Nix software deployment system can be
installed on any GNU/Linux distribution in parallel to the
regular package management system. Thus, you can use Hydra on a
Debian, Fedora, SuSE, or Ubuntu system.
</para>
</section>
<section>
<title>Getting Nix</title>
<para>
If your server runs NixOS you are all set to continue with
installation of Hydra. Otherwise you first need to install Nix.
The latest stable version can be found one <link
xlink:href="http://nixos.org/nix/download.html">the Nix web
site</link>, along with a manual, which includes installation
instructions.
</para>
</section>
<section>
<title>Installation</title>
<!--
<para>
Hydra can be installed using Nixpkgs:
<screen>
nix-env -f /path/to/nixpkgs -iA hydra</screen>
This makes the tools available in your Nix user environment,
<literal>$HOME/.nix-profile</literal> by default.
</para>
-->
<para>
The latest development snapshot of Hydra can be installed
by visiting the URL <link
xlink:href="http://hydra.nixos.org/view/hydra/unstable"><literal>http://hydra.nixos.org/view/hydra/unstable</literal></link>
and using the one-click install available at one of the build
pages. You can also install Hydra through the channel by
performing the following commands:
<screen>
nix-channel --add http://hydra.nixos.org/jobset/hydra/master/channel/latest
nix-channel --update
nix-env -i hydra</screen>
</para>
<para>
Command completion should reveal a number of command-line tools
from Hydra, such as <command>hydra-queue-runner</command>.
</para>
</section>
<section>
<title>Creating the database</title>
<para>
Hydra stores its results in a PostgreSQL database.
</para>
<para>
To setup a PostgreSQL database with <emphasis>hydra</emphasis>
as database name and user name, issue the following commands on
the PostgreSQL server:
<screen>
createuser -S -D -R -P hydra
createdb -O hydra hydra</screen>
Note that <emphasis>$prefix</emphasis> is the location of Hydra
in the nix store.
</para>
<para>
Hydra uses an environment variable to know which database should
be used, and a variable which point to a location that holds
some state. To set these variables for a PostgreSQL database,
add the following to the file <filename>~/.profile</filename> of
the user running the Hydra services.
<screen>
export HYDRA_DBI="dbi:Pg:dbname=hydra;host=dbserver.example.org;user=hydra;"
export HYDRA_DATA=/var/lib/hydra</screen>
You can provide the username and password in the file
<filename>~/.pgpass</filename>, e.g.
<screen>
dbserver.example.org:*:hydra:hydra:password</screen>
Make sure that the <emphasis>HYDRA_DATA</emphasis> directory
exists and is writable for the user which will run the Hydra
services.
</para>
<para>
Having set these environment variables, you can now initialise
the database by doing:
<screen>
hydra-init</screen>
</para>
<para>
To create projects, you need to create a user with
<emphasis>admin</emphasis> privileges. This can be done using
the command <command>hydra-create-user</command>:
<screen>
$ hydra-create-user alice --full-name 'Alice Q. User' \
--email-address 'alice@example.org' --password foobar --role admin
</screen>
Additional users can be created through the web interface.
</para>
</section>
<section>
<title>Upgrading</title>
<para>If you're upgrading Hydra from a previous version, you
should do the following to perform any necessary database schema migrations:
<screen>
hydra-init</screen>
</para>
</section>
<section>
<title>Getting Started</title>
<para>
To start the Hydra web server, execute:
<screen>
hydra-server</screen>
When the server is started, you can browse to
<ulink>http://localhost:3000/</ulink> to start configuring
your Hydra instance.
</para>
<para>
The <command>hydra-server</command> command launches the web
server. There are two other processes that come into play:
<itemizedlist>
<listitem>
The <emphasis>evaluator</emphasis> is responsible for
periodically evaluating job sets, checking out their
dependencies off their version control systems (VCS), and
queueing new builds if the result of the evaluation changed.
It is launched by the <command>hydra-evaluator</command>
command.
</listitem>
<listitem>
The <emphasis>queue runner</emphasis> launches builds (using
Nix) as they are queued by the evaluator, scheduling them
onto the configured Nix hosts. It is launched using the
<command>hydra-queue-runner</command> command.
</listitem>
</itemizedlist>
All three processes must be running for Hydra to be fully
functional, though it's possible to temporarily stop any one of
them for maintenance purposes, for instance.
</para>
</section>
<section>
<title> Serving behind reverse proxy </title>
<para>
To serve hydra web server behind reverse proxy like
<emphasis>nginx</emphasis> or <emphasis>httpd</emphasis> some
additional configuration must be made.
</para>
<para>
Edit your <literal>hydra.conf</literal> file in a similar way to
this example:
<screen>
using_frontend_proxy 1
base_uri example.com</screen>
<literal>base_uri</literal> should be your hydra servers proxied URL.
If you are using Hydra nixos module then setting <literal>hydraURL</literal>
option should be enough.
</para>
<para>
If you want to serve Hydra with a prefix path, for example
<ulink>http://example.com/hydra</ulink> then you need to configure your
reverse proxy to pass <literal>X-Request-Base</literal> to hydra, with
prefix path as value.
For example if you are using nginx, then use configuration similar to following:
<screen>
server {
listen 433 ssl;
server_name example.com;
.. other configuration ..
location /hydra/ {
proxy_pass http://127.0.0.1:3000;
proxy_redirect http://127.0.0.1:3000 https://example.com/hydra;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Forwarded-Proto $scheme;
proxy_set_header X-Request-Base /hydra;
}
}</screen>
</para>
</section>
<section>
<title>Using LDAP as authentication backend (optional)</title>
<para>
Instead of using Hydra's built-in user management you can optionally use LDAP to manage roles and users.
</para>
<para>
The <command>hydra-server</command> accepts the environment
variable <emphasis>HYDRA_LDAP_CONFIG</emphasis>. The value of
the variable should point to a valid YAML file containing the
Catalyst LDAP configuration. The format of the configuration
file is describe in the
<link xlink:href="https://metacpan.org/pod/Catalyst::Authentication::Store::LDAP#CONFIGURATION-OPTIONS">
<emphasis>Catalyst::Authentication::Store::LDAP</emphasis> documentation</link>.
An example is given below.
</para>
<para>
Roles can be assigned to users based on their LDAP group membership
(<emphasis>use_roles: 1</emphasis> in the below example).
For a user to have the role <emphasis>admin</emphasis> assigned to them
they should be in the group <emphasis>hydra_admin</emphasis>. In general
any LDAP group of the form <emphasis>hydra_some_role</emphasis>
(notice the <emphasis>hydra_</emphasis> prefix) will work.
</para>
<screen>
credential:
class: Password
password_field: password
password_type: self_check
store:
class: LDAP
ldap_server: localhost
ldap_server_options.timeout: 30
binddn: "cn=root,dc=example"
bindpw: notapassword
start_tls: 0
start_tls_options
verify: none
user_basedn: "ou=users,dc=example"
user_filter: "(&amp;(objectClass=inetOrgPerson)(cn=%s))"
user_scope: one
user_field: cn
user_search_options:
deref: always
use_roles: 1
role_basedn: "ou=groups,dc=example"
role_filter: "(&amp;(objectClass=groupOfNames)(member=%s))"
role_scope: one
role_field: cn
role_value: dn
role_search_options:
deref: always
</screen>
</section>
</chapter>
<!--
Local Variables:
indent-tabs-mode: nil
ispell-local-dictionary: "american"
End:
-->

267
doc/manual/introduction.xml
View file

@ -1,267 +0,0 @@
<chapter xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xml:id="chap-introduction">
<title>Introduction</title>
<section>
<title>About Hydra</title>
<para>
Hydra is a tool for continuous integration testing and software
release that uses a purely functional language to describe build jobs
and their dependencies. Continuous integration is a simple technique
to improve the quality of the software development process. An
automated system continuously or periodically checks out the source
code of a project, builds it, runs tests, and produces reports for the
developers. Thus, various errors that might accidentally be committed
into the code base are automatically caught. Such a system allows
more in-depth testing than what developers could feasibly do manually:
<itemizedlist>
<listitem> <emphasis>Portability testing</emphasis>: The
software may need to be built and tested on many different
platforms. It is infeasible for each developer to do this
before every commit.
</listitem>
<listitem> Likewise, many projects have very large test sets
(e.g., regression tests in a compiler, or stress tests in a
DBMS) that can take hours or days to run to completion.
</listitem>
<listitem> Many kinds of static and dynamic analyses can be
performed as part of the tests, such as code coverage runs and
static analyses.
</listitem>
<listitem> It may also be necessary to build many different
<emphasis>variants</emphasis> of the software. For instance,
it may be necessary to verify that the component builds with
various versions of a compiler.
</listitem>
<listitem> Developers typically use incremental building to
test their changes (since a full build may take too long), but
this is unreliable with many build management tools (such as
Make), i.e., the result of the incremental build might differ
from a full build.
</listitem>
<listitem> It ensures that the software can be built from the
sources under revision control. Users of version management
systems such as CVS and Subversion often forget to place
source files under revision control.
</listitem>
<listitem> The machines on which the continuous integration
system runs ideally provides a clean, well-defined build
environment. If this environment is administered through
proper SCM techniques, then builds produced by the system can
be reproduced. In contrast, developer work environments are
typically not under any kind of SCM control.
</listitem>
<listitem> In large projects, developers often work on a
particular component of the project, and do not build and test
the composition of those components (again since this is
likely to take too long). To prevent the phenomenon of ``big
bang integration'', where components are only tested together
near the end of the development process, it is important to
test components together as soon as possible (hence
<emphasis>continuous integration</emphasis>).
</listitem>
<listitem> It allows software to be
<emphasis>released</emphasis> by automatically creating
packages that users can download and install. To do this
manually represents an often prohibitive amount of work, as
one may want to produce releases for many different platforms:
e.g., installers for Windows and Mac OS X, RPM or Debian
packages for certain Linux distributions, and so on.
</listitem>
</itemizedlist>
</para>
<para>
In its simplest form, a continuous integration tool sits in a
loop building and releasing software components from a version
management system. For each component, it performs the
following tasks:
<itemizedlist>
<listitem>It obtains the latest version of the component's
source code from the version management system.
</listitem>
<listitem> It runs the component's build process (which
presumably includes the execution of the component's test
set).
</listitem>
<listitem> It presents the results of the build (such as error
logs and releases) to the developers, e.g., by producing a web
page.
</listitem>
</itemizedlist>
Examples of continuous integration tools include Jenkins,
CruiseControl Tinderbox, Sisyphus, Anthill and BuildBot. These
tools have various limitations.
<itemizedlist>
<listitem> They do not manage the <emphasis>build
environment</emphasis>. The build environment consists of the
dependencies necessary to perform a build action, e.g.,
compilers, libraries, etc. Setting up the environment is
typically done manually, and without proper SCM control (so it
may be hard to reproduce a build at a later time). Manual
management of the environment scales poorly in the number of
configurations that must be supported. For instance, suppose
that we want to build a component that requires a certain
compiler X. We then have to go to each machine and install X.
If we later need a newer version of X, the process must be
repeated all over again. An ever worse problem occurs if
there are conflicting, mutually exclusive versions of the
dependencies. Thus, simply installing the latest version is
not an option. Of course, we can install these components in
different directories and manually pass the appropriate paths
to the build processes of the various components. But this is
a rather tiresome and error-prone process.
</listitem>
<listitem> They do not easily support <emphasis>variability in software
systems</emphasis>. A system may have a great deal of build-time
variability: optional functionality, whether to build a debug or
production version, different versions of dependencies, and so on.
(For instance, the Linux kernel now has over 2,600 build-time
configuration switches.) It is therefore important that a continuous
integration tool can easily select and test different instances from
the configuration space of the system to reveal problems, such as
erroneous interactions between features. In a continuous integration
setting, it is also useful to test different combinations of versions
of subsystems, e.g., the head revision of a component against stable
releases of its dependencies, and vice versa, as this can reveal
various integration problems.
</listitem>
</itemizedlist>
</para>
<para>
<emphasis>Hydra</emphasis>, is a continuous integration tool
that solves these problems. It is built on top of the <link
xlink:href="http://nixos.org/nix/">Nix package manager</link>,
which has a purely functional language for describing package
build actions and their dependencies. This allows the build
environment for projects to be produced automatically and
deterministically, and variability in components to be expressed
naturally using functions; and as such is an ideal fit for a
continuous build system.
</para>
</section>
<section>
<title>About Us</title>
<para>
Hydra is the successor of the Nix Buildfarm, which was developed
in tandem with the Nix software deployment system. Nix was
originally developed at the Department of Information and
Computing Sciences, Utrecht University by the TraCE project
(2003-2008). The project was funded by the Software Engineering
Research Program Jacquard to improve the support for variability
in software systems. Funding for the development of Nix and
Hydra is now provided by the NIRICT LaQuSo Build Farm project.
</para>
</section>
<section>
<title>About this Manual</title>
<para>
This manual tells you how to install the Hydra buildfarm
software on your own server and how to operate that server using
its web interface.
</para>
</section>
<section>
<title>License</title>
<para>
Hydra is free software: you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation, either version 3 of
the License, or (at your option) any later version.
</para>
<para>
Hydra is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
<link xlink:href="http://www.gnu.org/licenses/">GNU General
Public License</link> for more details.
</para>
</section>
<section>
<title>Hydra at <literal>nixos.org</literal></title>
<para>
The <literal>nixos.org</literal> installation of Hydra runs at
<link
xlink:href="http://hydra.nixos.org/"><literal>http://hydra.nixos.org/</literal></link>.
That installation is used to build software components from the
<link xlink:href="http://nixos.org">Nix</link>,
<link xlink:href="http://nixos.org/nixos">NixOS</link>,
<link xlink:href="http://www.gnu.org/">GNU</link>,
<link xlink:href="http://strategoxt.org">Stratego/XT</link>,
and related projects.
</para>
<para>
If you are one of the developers on those projects, it is likely
that you will be using the NixOS Hydra server in some way. If
you need to administer automatic builds for your project, you
should pull the right strings to get an account on the
server. This manual will tell you how to set up new projects and
build jobs within those projects and write a release.nix file to
describe the build process of your project to Hydra. You can
skip the next chapter.
</para>
<para>
If your project does not yet have automatic builds within the
NixOS Hydra server, it may actually be eligible. We are in the
process of setting up a large buildfarm that should be able to
support open source and academic software projects. Get in
touch.
</para>
</section>
<section>
<title>Hydra on your own buildfarm</title>
<para>
If you need to run your own Hydra installation, <xref
linkend="chap-installation" /> explains how to download and
install the system on your own server.
</para>
</section>
</chapter>
<!--
Local Variables:
indent-tabs-mode: nil
ispell-local-dictionary: "american"
End:
-->

70
doc/manual/manual.xml
View file

@ -1,70 +0,0 @@
<book xmlns="http://docbook.org/ns/docbook"
xmlns:xi="http://www.w3.org/2001/XInclude">
<info>
<title>Hydra User's Guide</title>
<subtitle>Draft</subtitle>
<authorgroup>
<author>
<personname>
<firstname>Eelco</firstname>
<surname>Dolstra</surname>
</personname>
<affiliation>
<orgname>Delft University of Technology</orgname>
<orgdiv>Department of Software Technology</orgdiv>
</affiliation>
<contrib>Author</contrib>
</author>
<author>
<personname>
<firstname>Rob</firstname>
<surname>Vermaas</surname>
</personname>
<affiliation>
<orgname>Delft University of Technology</orgname>
<orgdiv>Department of Software Technology</orgdiv>
</affiliation>
<contrib>Author</contrib>
</author>
<author>
<personname>
<firstname>Eelco</firstname>
<surname>Visser</surname>
</personname>
<affiliation>
<orgname>Delft University of Technology</orgname>
<orgdiv>Department of Software Technology</orgdiv>
</affiliation>
<contrib>Author</contrib>
</author>
<author>
<personname>
<firstname>Ludovic</firstname>
<surname>Courtès</surname>
</personname>
<contrib>Author</contrib>
</author>
</authorgroup>
<copyright>
<year>2009-2013</year>
<holder>Eelco Dolstra</holder>
</copyright>
<date>March 2010</date>
</info>
<xi:include href="introduction.xml" />
<xi:include href="installation.xml" />
<xi:include href="projects.xml" />
<xi:include href="api.xml" />
<xi:include href="hacking.xml" />
</book>

496
doc/manual/projects.xml
View file

@ -1,496 +0,0 @@
<chapter xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
xml:id="chap-projects">
<title>Creating and Managing Projects</title>
<para>
Once Hydra is installed and running, the next step is to add
projects to the build farm. We follow the example of the <link
xlink:href="http://nixos.org/patchelf.html">Patchelf
project</link>, a software tool written in C and using the GNU
Build System (GNU Autoconf and GNU Automake).
</para>
<para>
Log in to the web interface of your Hydra installation using the
user name and password you inserted in the database (by default,
Hydra's web server listens on <link
xlink:href="http://localhost:3000/"><literal>localhost:3000</literal></link>).
Then follow the "Create Project" link to create a new project.
</para>
<section>
<title>Project Information</title>
<para>
A project definition consists of some general information and a
set of job sets. The general information identifies a project,
its owner, and current state of activity.
Here's what we fill in for the patchelf project:
<screen>
Identifier: patchelf
</screen>
The <emphasis>identifier</emphasis> is the identity of the
project. It is used in URLs and in the names of build results.
</para>
<para>
The identifier should be a unique name (it is the primary
database key for the project table in the database). If you try
to create a project with an already existing identifier you'd
get an error message from the database.
So try to create the project after entering just the general
information to figure out if you have chosen a unique name.
Job sets can be added once the project has been created.
<screen>
Display name: Patchelf
</screen>
The <emphasis>display name</emphasis> is used in menus.
<screen>
Description: A tool for modifying ELF binaries
</screen>
The <emphasis>description</emphasis> is used as short
documentation of the nature of the project.
<screen>
Owner: eelco
</screen>
The <emphasis>owner</emphasis> of a project can create and edit
job sets.
<screen>
Enabled: Yes
</screen>
Only if the project is <emphasis>enabled</emphasis> are builds
performed.
</para>
<para>
Once created there should be an entry for the project in the
sidebar. Go to the project page for the <link
xlink:href="http://localhost:3000/project/patchelf">Patchelf</link>
project.
</para>
</section>
<section>
<title>Job Sets</title>
<para>
A project can consist of multiple <emphasis>job sets</emphasis>
(hereafter <emphasis>jobsets</emphasis>), separate tasks that
can be built separately, but may depend on each other (without
cyclic dependencies, of course). Go to the <link
xlink:href="http://localhost:3000/project/patchelf/edit">Edit</link>
page of the Patchelf project and "Add a new jobset" by providing
the following "Information":
<screen>
Identifier: trunk
Description: Trunk
Nix expression: release.nix in input patchelfSrc
</screen>
This states that in order to build the <literal>trunk</literal>
jobset, the Nix expression in the file
<filename>release.nix</filename>, which can be obtained from
input <literal>patchelfSrc</literal>, should be
evaluated. (We'll have a look at
<filename>release.nix</filename> later.)
</para>
<para>
To realize a job we probably need a number of inputs, which can
be declared in the table below. As many inputs as required can
be added. For patchelf we declare the following inputs.
<screen>
patchelfSrc
'Git checkout' https://github.com/NixOS/patchelf
nixpkgs 'Git checkout' https://github.com/NixOS/nixpkgs
officialRelease Boolean false
system String value "i686-linux"
</screen>
</para>
</section>
<section>
<title>Building Jobs</title>
</section>
<section>
<title>Build Recipes</title>
<para>
Build jobs and <emphasis>build recipes</emphasis> for a jobset are
specified in a text file written in the <link
xlink:href="http://nixos.org/nix/">Nix language</link>. The
recipe is actually called a <emphasis>Nix expression</emphasis> in
Nix parlance. By convention this file is often called
<filename>release.nix</filename>.
</para>
<para>
The <filename>release.nix</filename> file is typically kept under
version control, and the repository that contains it one of the
build inputs of the corresponding–often called
<literal>hydraConfig</literal> by convention. The repository for
that file and the actual file name are specified on the web
interface of Hydra under the <literal>Setup</literal> tab of the
jobset's overview page, under the <literal>Nix
expression</literal> heading. See, for example, the <link
xlink:href="http://hydra.nixos.org/jobset/patchelf/trunk">jobset
overview page</link> of the PatchELF project, and <link
xlink:href="https://github.com/NixOS/patchelf/blob/master/release.nix">
the corresponding Nix file</link>.
</para>
<para>
Knowledge of the Nix language is recommended, but the example
below should already give a good idea of how it works:
</para>
<example xml:id='ex-hello'>
<title><filename>release.nix</filename> file for GNU Hello</title>
<programlisting>
let
pkgs = import &lt;nixpkgs&gt; {}; <co xml:id='ex-hello-co-import-nixpkgs' />
jobs = rec { <co xml:id='ex-hello-co-jobs' />
tarball = <co xml:id='ex-hello-co-tarball' />
pkgs.releaseTools.sourceTarball { <co xml:id='ex-hello-co-source-tarball' />
name = "hello-tarball";
src = &lt;hello&gt;; <co xml:id='ex-hello-co-tarball-args' />
buildInputs = (with pkgs; [ gettext texLive texinfo ]);
};
build = <co xml:id='ex-hello-co-build' />
{ system ? builtins.currentSystem }: <co xml:id='ex-hello-co-build-args' />
let pkgs = import &lt;nixpkgs&gt; { inherit system; }; in
pkgs.releaseTools.nixBuild { <co xml:id='ex-hello-co-nix-build' />
name = "hello";
src = jobs.tarball;
configureFlags = [ "--disable-silent-rules" ];
};
};
in
jobs <co xml:id='ex-hello-co-body' />
</programlisting>
</example>
<para>
<xref linkend='ex-hello' /> shows what a
<filename>release.nix</filename> file for <link
xlink:href="http://www.gnu.org/software/hello/">GNU Hello</link>
would look like. GNU Hello is representative of many GNU
and non-GNU free software projects:
<itemizedlist>
<listitem>it uses the GNU Build System, namely GNU Autoconf,
and GNU Automake; for users, it means it can be installed
using the <link
xlink:href="http://www.gnu.org/prep/standards/html_node/Managing-Releases.html">usual
<literal>./configure &amp;&amp; make install</literal>
procedure</link>;
</listitem>
<listitem>it uses Gettext for internationalization;</listitem>
<listitem>it has a Texinfo manual, which can be rendered as PDF
with TeX.</listitem>
</itemizedlist>
The file defines a jobset consisting of two jobs:
<literal>tarball</literal>, and <literal>build</literal>. It
contains the following elements (referenced from the figure by
numbers):
<calloutlist>
<callout arearefs='ex-hello-co-import-nixpkgs'>
<para>
This defines a variable <varname>pkgs</varname> holding
the set of packages provided by <link
xlink:href="http://nixos.org/nixpkgs/">Nixpkgs</link>.
</para>
<para>
Since <varname>nixpkgs</varname> appears in angle brackets,
there must be a build input of that name in the Nix search
path. In this case, the web interface should show a
<varname>nixpkgs</varname> build input, which is a checkout
of the Nixpkgs source code repository; Hydra then adds this
and other build inputs to the Nix search path when
evaluating <filename>release.nix</filename>.
</para>
</callout>
<callout arearefs='ex-hello-co-jobs'>
<para>
This defines a variable holding the two Hydra
jobs–an <emphasis>attribute set</emphasis> in Nix.
</para>
</callout>
<callout arearefs='ex-hello-co-tarball'>
<para>
This is the definition of the first job, named
<varname>tarball</varname>. The purpose of this job is to
produce a usable source code tarball.
</para>
</callout>
<callout arearefs='ex-hello-co-source-tarball'>
<para>
The <varname>tarball</varname> job calls the
<varname>sourceTarball</varname> function, which (roughly)
runs <command>autoreconf &amp;&amp; ./configure &amp;&amp;
make dist</command> on the checkout. The
<varname>buildInputs</varname> attribute specifies
additional software dependencies for the
job<footnote><para>The package names used in
<varname>buildInputs</varname>–e.g.,
<varname>texLive</varname>–are the names of the
<emphasis>attributes</emphasis> corresponding to these
packages in Nixpkgs, specifically in the <link
xlink:href="https://github.com/NixOS/nixpkgs/blob/master/pkgs/top-level/all-packages.nix"><filename>all-packages.nix</filename></link>
file. See the section entitled “Package Naming” in the
Nixpkgs manual for more information.</para></footnote>.
</para>
</callout>
<callout arearefs='ex-hello-co-tarball-args'>
<para>
The <varname>tarball</varname> jobs expects a
<varname>hello</varname> build input to be available in the
Nix search path. Again, this input is passed by Hydra and
is meant to be a checkout of GNU Hello's source code
repository.
</para>
</callout>
<callout arearefs='ex-hello-co-build'>
<para>
This is the definition of the <varname>build</varname>
job, whose purpose is to build Hello from the tarball
produced above.
</para>
</callout>
<callout arearefs='ex-hello-co-build-args'>
<para>
The <varname>build</varname> function takes one
parameter, <varname>system</varname>, which should be a string
defining the Nix system type–e.g.,
<literal>"x86_64-linux"</literal>. Additionally, it refers
to <varname>jobs.tarball</varname>, seen above.
</para>
<para>
Hydra inspects the formal argument list of the function
(here, the <varname>system</varname> argument) and passes it
the corresponding parameter specified as a build input on
Hydra's web interface. Here, <varname>system</varname> is
passed by Hydra when it calls <varname>build</varname>.
Thus, it must be defined as a build input of type string in
Hydra, which could take one of several values.
</para>
<para>
The question mark after <literal>system</literal> defines
the default value for this argument, and is only useful when
debugging locally.
</para>
</callout>
<callout arearefs='ex-hello-co-nix-build'>
<para>
The <varname>build</varname> job calls the
<varname>nixBuild</varname> function, which unpacks the
tarball, then runs <command>./configure &amp;&amp; make
&amp;&amp; make check &amp;&amp; make install</command>.
</para>
</callout>
<callout arearefs='ex-hello-co-body'>
<para>
Finally, the set of jobs is returned to Hydra, as a Nix
attribute set.
</para>
</callout>
</calloutlist>
</para>
</section>
<section>
<title>Building from the Command Line</title>
<para>
It is often useful to test a build recipe, for instance before
it is actually used by Hydra, when testing changes, or when
debugging a build issue. Since build recipes for Hydra jobsets
are just plain Nix expressions, they can be evaluated using the
standard Nix tools.
</para>
<para>
To evaluate the <varname>tarball</varname> jobset of <xref
linkend='ex-hello' />, just run:
<screen>
$ nix-build release.nix -A tarball
</screen>
However, doing this with <xref linkend='ex-hello' /> as is will
probably yield an error like this:
<screen>
error: user-thrown exception: file `hello' was not found in the Nix search path (add it using $NIX_PATH or -I)
</screen>
The error is self-explanatory. Assuming
<filename>$HOME/src/hello</filename> points to a checkout of
Hello, this can be fixed this way:
<screen>
$ nix-build -I ~/src release.nix -A tarball
</screen>
Similarly, the <varname>build</varname> jobset can be evaluated:
<screen>
$ nix-build -I ~/src release.nix -A build
</screen>
The <varname>build</varname> job reuses the result of the
<varname>tarball</varname> job, rebuilding it only if it needs to.
</para>
</section>
<section>
<title>Adding More Jobs</title>
<para>
<xref linkend='ex-hello' /> illustrates how to write the most
basic jobs, <varname>tarball</varname> and
<varname>build</varname>. In practice, much more can be done by
using features readily provided by Nixpkgs or by creating new jobs
as customizations of existing jobs.
</para>
<para>
For instance, test coverage report for projects compiled with GCC
can be automatically generated using the
<varname>coverageAnalysis</varname> function provided by Nixpkgs
instead of <varname>nixBuild</varname>. Back to our GNU Hello
example, we can define a <varname>coverage</varname> job that
produces an HTML code coverage report directly readable from the
corresponding Hydra build page:
<programlisting>
coverage =
{ system ? builtins.currentSystem }:
let pkgs = import nixpkgs { inherit system; }; in
pkgs.releaseTools.coverageAnalysis {
name = "hello";
src = jobs.tarball;
configureFlags = [ "--disable-silent-rules" ];
};
</programlisting>
As can be seen, the only difference compared to
<varname>build</varname> is the use of
<varname>coverageAnalysis</varname>.
</para>
<para>
Nixpkgs provides many more build tools, including the ability to
run build in virtual machines, which can themselves run another
GNU/Linux distribution, which allows for the creation of packages
for these distributions. Please see <link
xlink:href="https://github.com/NixOS/nixpkgs/tree/master/pkgs/build-support/release">the
<filename>pkgs/build-support/release</filename> directory</link>
of Nixpkgs for more. The NixOS manual also contains information
about whole-system testing in virtual machine.
</para>
<para>
Now, assume we want to build Hello with an old version of GCC, and
with different <command>configure</command> flags. A new
<varname>build_exotic</varname> job can be written that simply
<emphasis>overrides</emphasis> the relevant arguments passed to
<varname>nixBuild</varname>:
<programlisting>
build_exotic =
{ system ? builtins.currentSystem }:
let
pkgs = import nixpkgs { inherit system; };
build = jobs.build { inherit system; };
in
pkgs.lib.overrideDerivation build (attrs: {
buildInputs = [ pkgs.gcc33 ];
preConfigure = "gcc --version";
configureFlags =
attrs.configureFlags ++ [ "--disable-nls" ];
});
</programlisting>
The <varname>build_exotic</varname> job reuses
<varname>build</varname> and overrides some of its arguments: it
adds a dependency on GCC 3.3, a pre-configure phase that runs
<command>gcc --version</command>, and adds the
<literal>--disable-nls</literal> configure flags.
</para>
<para>
This customization mechanism is very powerful. For instance, it
can be used to change the way Hello and <emphasis>all</emphasis>
its dependencies–including the C library and compiler used to
build it–are built. See the Nixpkgs manual for more.
</para>
</section>
<xi:include href="declarative-projects.xml" />
<section>
<title>Email Notifications</title>
<para>
Hydra can send email notifications when the status of a build changes. This provides
immediate feedback to maintainers or committers when a change causes build failures.
</para>
<para>
The simplest approach to enable Email Notifications is to use the ssmtp package, which
simply hands off the emails to another SMTP server. For details on how to configure ssmtp,
see the documentation for the <varname>networking.defaultMailServer</varname> option.
To use ssmtp for the Hydra email notifications, add it to the path option of the Hydra services
in your <filename>/etc/nixos/configuration.nix</filename> file:
<programlisting>
systemd.services.hydra-queue-runner.path = [ pkgs.ssmtp ];
systemd.services.hydra-server.path = [ pkgs.ssmtp ];
</programlisting>
</para>
</section>
</chapter>
<!--
Local Variables:
indent-tabs-mode: nil
ispell-local-dictionary: "american"
End:
-->