because it defines _FILE_OFFSET_BITS. Without this, on
OpenSolaris the system headers define it to be 32, and then
the 32-bit stat() ends up being called with a 64-bit "struct
stat", or vice versa.
This also ensures that we get 64-bit file sizes everywhere.
* Remove the redundant call to stat() in parseExprFromFile().
The file cannot be a symlink because that's the exit condition
of the loop before.
* If a path has disappeared, check its referrers first, and don't try
to invalidate paths that have valid referrers. Otherwise we get a
foreign key constraint violation.
* Read the whole Nix store directory instead of statting each valid
path, which is slower.
* Acquire the global GC lock.
hook script proper, and the stdout/stderr of the builder. Only the
latter should be saved in /nix/var/log/nix/drvs.
* Allow the verbosity to be set through an option.
* Added a flag --quiet to lower the verbosity level.
it requires a certain feature on the build machine, e.g.
requiredSystemFeatures = [ "kvm" ];
We need this in Hydra to make sure that builds that require KVM
support are forwarded to machines that have KVM support. Probably
this should also be enforced for local builds.
the hook every time we want to ask whether we can run a remote build
(which can be very often), we now reuse a hook process for answering
those queries until it accepts a build. So if there are N
derivations to be built, at most N hooks will be started.
faster than the old mode when fsyncs are enabled, because it only
performs an fsync() when doing a checkpoint, rather than at every
commit. Some timings for doing a "nix-instantiate /etc/nixos/nixos
-A system" after modifying the stdenv setup script:
42.5s - SQLite 3.6.23 with truncate mode and fsync
3.4s - SQLite 3.6.23 with truncate mode and no fsync
32.1s - SQLite 3.7.0 with truncate mode and fsync
16.8s - SQLite 3.7.0 with WAL mode and fsync, auto-checkpoint
every 1000 pages
8.3s - SQLite 3.7.0 with WAL mode and fsync, auto-checkpoint
every 8192 pages
1.7s - SQLite 3.7.0 with WAL mode and no fsync
The default is now to use WAL mode with fsyncs. Because WAL doesn't
work on remote filesystems such as NFS (as it uses shared memory),
truncate mode can be re-enabled by setting the "use-sqlite-wal"
option to false.
using the build hook mechanism, by setting the derivation attribute
"preferLocalBuild" to true. This has a few use cases:
- The user environment builder. Since it just creates a bunch of
symlinks without much computation, there is no reason to do it
remotely. In fact, doing it remotely requires the entire closure
of the user environment to be copied to the remote machine, which
is extremely wasteful.
- `fetchurl'. Performing the download on a remote machine and then
copying it to the local machine involves twice as much network
traffic as performing the download locally, and doesn't save any
CPU cycles on the local machine.
An "using namespace std" was added locally in those functions that refer to
names from <cstring>. That is not pretty, but it's a very portable solution,
because strcpy() and friends will be found in both the 'std' and in the global
namespace.
This patch adds the configuration file variable "build-cores" and the
command line argument "--cores". These settings specify the number of
CPU cores to utilize for parallel building within a job, i.e. by passing
an appropriate "-j" flag to GNU Make. The default value is 1, which
means that parallel building is *disabled*. If the number of build cores
is specified as 0 (synonymously: "guess" or "auto"), then the actual
value is supposed to be auto-detected by builders at run-time, i.e by
calling the nproc(1) utility from coreutils.
The environment variable $NIX_BUILD_CORES is available to builders, but
the contents of that variable does *not* influence the hash that goes
into the $out store path, i.e. the number of build cores to be utilized
can be changed at will without requiring any re-builds.
doesn't work because the garbage collector doesn't actually look at
locks. So r22253 was stupid. Use addTempRoot() instead. Also,
locking the temporary directory in exportPath() was silly because it
isn't even in the store.
changed. This prevents corrupt paths from spreading to other
machines. Note that checking the hash is cheap because we're
hashing anyway (because of the --sign feature).
to make the Refs table more space-efficient. For instance, this
reduces the size of the database on my laptop from 93 MiB to 18
MiB. (It was 72 MiB with the old schema on an ext3 disk with a 1
KiB block size.)
This prevents remote builders from being killed by the
`max-silent-time' inactivity monitor while they are waiting for a
long garbage collection to finish. This happens fairly often in the
Hydra build farm.
_FILE_OFFSET_BITS=64. Without it, functions like stat() fail on
large file sizes. This happened with a Nix store on squashfs:
$ nix-store --dump /tmp/mnt/46wzqnk4cbdwh1dclhrpqnnz1icak6n7-local-net-cmds > /dev/null
error: getting attributes of path `/tmp/mnt/46wzqnk4cbdwh1dclhrpqnnz1icak6n7-local-net-cmds': Value too large for defined data type
$ stat /tmp/mnt/46wzqnk4cbdwh1dclhrpqnnz1icak6n7-local-net-cmds
File: `/tmp/mnt/46wzqnk4cbdwh1dclhrpqnnz1icak6n7-local-net-cmds'
Size: 0 Blocks: 36028797018963968 IO Block: 1024 regular empty file
(This is a bug in squashfs or mksquashfs, but it shouldn't cause Nix
to fail.)
complete set of live and dead paths before starting the actual
deletion, but determines liveness on demand. I.e. for any path in
the store, it first tries to delete all the referrers, and then the
path itself. This means that the collector can start deleting paths
almost immediately.
(Linux) machines no longer maintain the atime because it's too
expensive, and on the machines where --use-atime is useful (like the
buildfarm), reading the atimes on the entire Nix store takes way too
much time to make it practical.
UTC) rather than 0 (00:00:00). 1 is a better choice because some
programs use 0 as a special value. For instance, the Template
Toolkit uses a timestamp of 0 to denote the non-existence of a file,
so it barfs on files in the Nix store (see
template-toolkit-nix-store.patch in Nixpkgs). Similarly, Maya 2008
fails to load script directories with a timestamp of 0 and can't be
patched because it's closed source.
This will also shut up those "implausibly old time stamp" GNU tar
warnings.
(that is, call the build hook with a certain interval until it
accepts the build).
* build-remote.pl was totally broken: for all system types other than
the local system type, it would send all builds to the *first*
machine of the appropriate type.
poll for it (i.e. if we can't acquire the lock, then let the main
select() loop wait for at most a few seconds and then try again).
This improves parallelism: if two nix-store processes are both
trying to build a path at the same time, the second one shouldn't
block; it should first see if it can build other goals. Also, it
prevents the deadlocks that have been occuring in Hydra lately,
where a process waits for a lock held by another process that's
waiting for a lock held by the first.
The downside is that polling isn't really elegant, but POSIX doesn't
provide a way to wait for locks in a select() loop. The only
solution would be to spawn a thread for each lock to do a blocking
fcntl() and then signal the main thread, but that would require
pthreads.
would just silently store only (fileSize % 2^32) bytes.
* Use posix_fallocate if available when unpacking archives.
* Provide a better error message when trying to unpack something that
isn't a NAR archive.
sure that it works as expected when you pass it a derivation. That
is, we have to make sure that all build-time dependencies are built,
and that they are all in the input closure (otherwise remote builds
might fail, for example). This is ensured at instantiation time by
adding all derivations and their sources to inputDrvs and inputSrcs.
hook. This fixes a problem with log files being partially or
completely filled with 0's because another nix-store process
truncates the log file. It should also be more efficient.
the DerivationGoal runs. Otherwise, if a goal is a top-level goal,
then the lock won't be released until nix-store finishes. With
--keep-going and lots of top-level goals, it's possible to run out
of file descriptors (this happened sometimes in the build farm for
Nixpkgs). Also, for failed derivation, it won't be possible to
build it again until the lock is released.
* Idem for locks on build users: these weren't released in a timely
manner for failed top-level derivation goals. So if there were more
than (say) 10 such failed builds, you would get an error about
having run out of build users.
scan for runtime dependencies (i.e. the local machine shouldn't do a
scan that the remote machine has already done). Also pipe directly
into `nix-store --import': don't use a temporary file.
(e.g. an SSH connection problem) and permanent failures (i.e. the
builder failed). This matters to Hydra (it wants to know whether it
makes sense to retry a build).
closure of the inputs. This really enforces that there can't be any
undeclared dependencies on paths in the store. This is done by
creating a fake Nix store and creating bind-mounts or hard-links in
the fake store for all paths in the closure. After the build, the
build output is moved from the fake store to the real store. TODO:
the chroot has to be on the same filesystem as the Nix store for
this to work, but this isn't enforced yet. (I.e. it only works
currently if /tmp is on the same FS as /nix/store.)
bind-mounts we do are only visible to the builder process and its
children. So accidentally doing "rm -rf" on the chroot directory
won't wipe out /nix/store and other bind-mounted directories
anymore. Also, the bind-mounts in the private namespace disappear
automatically when the builder exits.
necessary that at least one build hook doesn't return "postpone",
otherwise nix-store will barf ("waiting for a build slot, yet there
are no running children"). So inform the build hook when this is
the case, so that it can start a build even when that would exceed
the maximum load on a machine.
