Adds a `repl-overlays` option, which specifies files that can overlay
and modify the top-level bindings in `nix repl`. For example, with the
following contents in `~/.config/nix/repl.nix`:
info: final: prev: let
optionalAttrs = predicate: attrs:
if predicate
then attrs
else {};
in
optionalAttrs (prev ? legacyPackages && prev.legacyPackages ? ${info.currentSystem})
{
pkgs = prev.legacyPackages.${info.currentSystem};
}
We can run `nix repl` and use `pkgs` to refer to `legacyPackages.${currentSystem}`:
$ nix repl --repl-overlays ~/.config/nix/repl.nix nixpkgs
Lix 2.90.0
Type :? for help.
Loading installable 'flake:nixpkgs#'...
Added 5 variables.
Loading 'repl-overlays'...
Added 6 variables.
nix-repl> pkgs.bash
«derivation /nix/store/g08b5vkwwh0j8ic9rkmd8mpj878rk62z-bash-5.2p26.drv»
Change-Id: Ic12e0f2f210b2f46e920c33088dfe1083f42391a
This probably snuck in in a refactor using truthiness or so. The
trustedness flag was having the optional fullness checked, rather than
the actual contained trust level.
Also adds some tests.
```
m1@6876551b-255d-4cb0-af02-8a4f17b27e2e ~ % nix store ping
warning: 'nix store ping' is a deprecated alias for 'nix store info'
Store URL: daemon
Version: 2.20.4
Trusted: 0
m1@6876551b-255d-4cb0-af02-8a4f17b27e2e ~ % nix doctor
warning: 'doctor' is a deprecated alias for 'config check'
[PASS] PATH contains only one nix version.
[PASS] All profiles are gcroots.
[PASS] Client protocol matches store protocol.
[INFO] You are trusted by store uri: daemon
```
Fixes: lix-project/lix#232
Change-Id: I21576e2a0a755036edf8814133345987617ba3d0
* changes:
Revert "libutil: drop Pool resources on exceptional free"
Revert "libutil: remove Pool::Handle::bad"
Revert "libstore: remove one Resource::good flag"
Revert "libstore: using throwing finally in withFramedSink"
Revert "libutil: allow graceful dropping of Pool::Handle"
Revert "libutil: drop Fs{Source,Sink}::good"
libutil: guard Finally against invalid exception throws
- Use a recursive descent parser so that it's easy to extend.
- Add `@args` to enable customizing command-line arguments
- Add `@should-start` to enable `nix repl` tests that error before
entering the REPL
- Make sure to read all stdout output before comparing. This catches
some extra output we were tossing out before!
Change-Id: I5522555df4c313024ab15cd10f9f04e7293bda3a
These were mistakenly labeled `eval-fail-*`.
Note that the `lang.sh` runner passes `parse-fail-*` tests on stdin, so
filenames are removed from error messages.
Change-Id: I7f3a0d78b6cfa87af29aaa1b7af19d5a57fd4ade
this was never actually used, and bad design in the first place—why
should a bad resource be put back into the idle pool? just drop it.
Change-Id: Idab8774bee19dadae0209d404c4fb86dd4aeba1e
if a scope owning a resource does not gracefully drop that resource
while handling exceptions from deeper down the call stack we should
assume the resource is invalid state and drop it. currently it *is*
true that such cases do not cause resources to be freed, but thanks
to validator misuses this has so far not caused any larger problem.
Change-Id: Ie4f91bcd60a64d05c5ff9d22cc97954816d13b97
The big ones here are `trim-trailing-whitespace` and `end-of-file-fixer`
(which makes sure that every file ends with exactly one newline
character).
Change-Id: Idca73b640883188f068f9903e013cf0d82aa1123
* some things that can throw are marked noexcept
yet the linter seems to think not. Maybe they can't throw in practice.
I would rather not have the UB possibility in pretty obvious cold
paths.
* various default-case-missing complaints
* a fair pile of casts from integer to character, which are in fact
deliberate.
* an instance of <https://clang.llvm.org/extra/clang-tidy/checks/bugprone/move-forwarding-reference.html>
* bugprone-not-null-terminated-result on handing a string to curl in
chunks of bytes. our usage is fine.
* reassigning a unique_ptr by CRIMES instead of using release(), then
using release() and ignoring the result. wild. let's use release() for
its intended purpose.
Change-Id: Ic3e7affef12383576213a8a7c8145c27e662513d
Without this, the Meson setup won't bail out if nlohmann_json is
missing, leading to subpar DX (and maybe worse, but I'm not entirely
sure).
Change-Id: I5913111060226b540dcf003257c99a08e84da0de
sometimes these fail with timeouts on loaded machines. let's up the
timeouts until we can pull the tests apart to more reasonable sizes
Change-Id: I2dfff2183cc1f3ff5e6107f43748ac046fe00d05
Functional tests can be run with
`meson test -C build --suite installcheck`.
Notably, functional tests must be run *after* running `meson install`
(Lix's derivation runs the installcheck suite in installCheckPhase so it
does this correctly), due to some quirks between Meson and the testing
system.
As far as I can tell the functional tests are meant to be run after
installing anyway, but unfortunately I can't transparently make
`meson test --suite installcheck` depend on the install targets.
The script that runs the functional tests, meson/run-test.py, checks
that `meson install` has happened and fails fast with a (hopefully)
helpful error message if any of the functional tests are run before
installing.
TODO: this change needs reflection in developer documentation
Change-Id: I8dcb5fdfc0b6cb17580973d24ad930abd57018f6
This was achieved by running maintainers/buildtime_report.sh on the
build directory of a meson build, then asking "why the heck is json
eating our build times", and strategically moving the json using bits
out of widely included headers.
It turns out that putting literally any metrics whatsoever into the
build had immediate and predictable results.
Results are 1382.5s frontend time -> 1175.4s frontend time, back end
time approximately invariant.
Related: lix-project/lix#159
Change-Id: I7edea95c8536203325c8bb4dae5f32d727a21b2d
Unit tests can be run with `meson test -C build --suite check`.
`--suite check` is optional, as right now that's the only test suite,
but when functional tests are added those will be in a separate suite.
Change-Id: I7f22f1cde4b489b3cdb5f9a36a544f0c409fcc1f
An attrPath prefix of "." indicates no need to try default attrPath prefixes. For example `nixpkgs#legacyPackages.x86_64-linux.ERROR` searches through
```
trying flake output attribute 'packages.x86_64-linux.legacyPackages.x86_64-linux.ERROR'
using cached attrset attribute ''
trying flake output attribute 'legacyPackages.x86_64-linux.legacyPackages.x86_64-linux.ERROR'
using cached attrset attribute 'legacyPackages.x86_64-linux'
trying flake output attribute 'legacyPackages.x86_64-linux.ERROR'
using cached attrset attribute 'legacyPackages.x86_64-linux'
```
And there is no way to specify that one does not want the automatic
search behavior. Now one can specify
`nixpkgs#.legacyPackages.x86_64-linux.ERROR` to only refer to the rooted
attribute path without any default injection of attribute search path or
system.
Change-Id: Iac1334e1470137b7ce11dcf845513810230638ec
(cherry picked from commit d4aed18883b361133607296fb6cd789c47427a38)
static env association is from expr to its enclosing scope, but let
exprs set their association to their *inner* scope. this skips one level
of envs and will cause segfaults if the parent is a with expr.
fixes#145
Change-Id: I1d22146110f071ede21b4eed7ed34b5850ef2ef3
not doing this exposes the binding name order to the annoying
interference of parse order on symbol order, which wouldn't be so bad if
it didn't make the tests less reliable and, importantly, dependent on
linker behavior (due to primop initialization being done in static
initializer, and the order of static initializers being defined only
within a single translation unit).
fixes#143
Change-Id: I3cf417893fbcf19e9ad3ff8986deb7cbcf3ca511
we now keep not a table of all positions, but a table of all origins and
their sizes. position indices are now direct pointers into the virtual
concatenation of all parsed contents. this slightly reduces memory usage
and time spent in the parser, at the cost of not being able to report
positions if the total input size exceeds 4GiB. this limit is not unique
to nix though, rustc and clang also limit their input to 4GiB (although
at least clang refuses to process inputs that are larger, we will not).
this new 4GiB limit probably will not cause any problems for quite a
while, all of nixpkgs together is less than 100MiB in size and already
needs over 700MiB of memory and multiple seconds just to parse. 4GiB
worth of input will easily take multiple minutes and over 30GiB of
memory without even evaluating anything. if problems *do* arise we can
probably recover the old table-based system by adding some tracking to
Pos::Origin (or increasing the size of PosIdx outright), but for time
being this looks like more complexity than it's worth.
since we now need to read the entire input again to determine the
line/column of a position we'll make unsafeGetAttrPos slightly lazy:
mostly the set it returns is only used to determine the file of origin
of an attribute, not its exact location. the thunks do not add
measurable runtime overhead.
notably this change is necessary to allow changing the parser since
apparently nothing supports nix's very idiosyncratic line ending choice
of "anything goes", making it very hard to calculate line/column
positions in the parser (while byte offsets are very easy).
(cherry picked from commit 5d9fdab3de0ee17c71369ad05806b9ea06dfceda)
Change-Id: Ie0b2430cb120c09097afa8c0101884d94f4bbf34
this needs a string comparison because there seems to be no other way to
get that information out of bison. usually the location info is going to
be correct (pointing at a bad token), but since EOF isn't a token as
such it'll be wrong in that this case.
this hasn't shown up much so far because a single line ending *is* a
token, so any file formatted in the usual manner (ie, ending in a line
ending) would have its EOF position reported correctly.
(cherry picked from commit 855fd5a1bb781e4f722c1d757ba43e866d370132)
Change-Id: I120c56a962f4286b1ae3b71da7b71ce8ec3e0535
the parser treats a plain \r as a newline, error reports do not. this
can lead to interesting divergences if anything makes use of this
feature, with error reports pointing to wrong locations in the input (or
even outside the input altogether).
(cherry picked from commit 2be6b143289e5479cc4a2667bb84e879116c2447)
Change-Id: Ieb7f7655bac8cb0cf5734c60bd41723388f2973c
previously we reported the error at the beginning of the binding
block (for plain inherits) or the beginning of the attr list (for
inherit-from), effectively hiding where exactly the error happened.
this also carries over to runtime positions of attributes in sets as
reported by unsafeGetAttrPos. we're not worried about this changing
observable eval behavior because it *is* marked unsafe, and the new
behavior is much more useful.
(cherry picked from commit 1edd6fada53553b89847ac3981ac28025857ca02)
Change-Id: I2f50eb9f3dc3977db4eb3e3da96f1cb37ccd5174
we already normalize attr order to lexicographic, doing the same for
formals makes sense. doubly so because the order of formals would
otherwise depend on the context of the expression, which is not quite as
useful as one might expect.
(cherry picked from commit 4147ecfb1c51f3fe3b4adcbd4e753fd487dab645)
Change-Id: I3fd0dbdef3ac7447a3a03ff20bb514a0d0f23fb1
the parser modifies its inputs, which means that sharing them between
the error context reporting system and the parser itself can confuse the
reporting system. usually this led to early truncation of error context
reports which, while not dangerous, can be quite confusing.
(cherry picked from commit d384ecd553aa997270b79ee98d02f7cf7e1849e6)
Change-Id: I677646b5675b12b2faa787943646aa36dc6e6ee3
These now have equivalents in the standard lib in C++20. This change was
performed with a custom clang-tidy check which I will submit later.
Executed like so:
ninja -C build && run-clang-tidy -checks='-*,nix-*' -load=build/libnix-clang-tidy.so -p .. -fix ../tests | tee -a clang-tidy-result
Change-Id: I62679e315ff9e7ce72a40b91b79c3e9fc01b27e9
This builtin is only going to cause us problems because we are not Nix,
so let's just falsify being in the 2.18 series, since that is the
closest target that has any meaning.
In future we might want to have a better feature detection mechanism,
for when we actually add stuff to some builtin's attr set argument. But
builtins.nixVersion is just going to be hopelessly broken and it should
be stubbed out.
Fixes lix-project/lix#144
Change-Id: Id7390b32a29c6147f2977737d81846320de5d67e
diagnose attr duplication at the path the duplication was detected, not
at the path the current attribute wanted to place. doing the latter is
only correct if a leaf attribute was duplicated, not if an attrpath was
set to a non-attrset in one binding and a (potentially implied) attrset
in another binding.
fixes#124
Change-Id: Ic4aa9cc12a9874d4e7897c6f64408f10aa36fc82
It happens with some frequency that plugins that might be unimportant to
the evaluation at hand mismatch with the nix version, leading to
spurious load failures. Let's make these non fatal.
Change-Id: Iba10e951d171725ccf1a121bcd9be1e1d6ad69eb
This is because they are unrepresentable in the source files with
commentary but not in the output, so we should just eat them in
normalization. It's ok.
Change-Id: I2cb7e8b3fc7b00874885bb287cbaa200b41cb16b
using the total-attrs-printed and total-list-items-printed counters to
calculate how many attrs were elided only works properly if no nesting
is involved. once things do nest the global counter can exceed the size
of the currently printed object, leading to unsigned wrapping and great
overestimation of elided counts. counting locally in addition to global
counts fixes this.
these are functional tests because creating these objects requires the
evaluator to not be a huge amount of code, and we also want defaults to
be tested for cli usage.
fixes#14
Change-Id: Icb9a0cb21b2f4bacbc5e9dcdd8c0b9055b4088a7
this lets us set per-test-program environment variables rather than only
a single, global default. this was supported in nix originally but
might've gone partially missing in the upstream backports process?
Change-Id: Iad0919841b1b6d11e0b7ebd3920449a62f544e77
This has some Flaws for sure (like, it is going to be a bit stretched to
use for repl characterization), but it is a start.
Change-Id: I258c8beb3aee236f45818a03be83bcda858120c9
desugaring inherit-from to syntactic duplication of the source expr also
duplicates side effects of the source expr (such as trace calls) and
expensive computations (such as derivationStrict).
(cherry picked from commit cefd0302b55b3360dbca59cfcb4bf6a750d6cdcf)
Change-Id: Iff519f991adef2e51683ba2c552d37a3df7a179e
for plain inherits this is really just a stylistic choice, but for
inherit-from it actually fixes an exponential size increase problem
during expr printing (as may happen during assertion failure reporting,
on during duplicate attr detection in the parser)
(cherry picked from commit ecf8b12d60ad2929f9998666cf0966475b91e291)
Change-Id: Ie55f0cb01a37e766414c31f8d40f51c2c7d106b0
this also has the effect of sorting let bindings lexicographically
rather than by symbol creation order as was previously done, giving a
better canonicalization in the process.
(cherry picked from commit 6c08fba533ef31cad2bdc03ba72ecf58dc8ee5a0)
Change-Id: Ia887f629305645bb8a165fbbc0d32e620912595a
without these changes the tests will very repeatably (although not very
reliably) wedge in our runs. the ssh command starts, opens a sessions,
does something, the session closes again, but the test does not move on.
adding *just* the redirect and not the unit waits is not sufficient
either, it needs both. this feels like a bug in the nixos testing
framework somewhere, but digging that far is not in the cards right now.
Change-Id: Idab577b83a36cc4899bb5ffbb3d9adc04e83e51c
Do not skip any stack frames when `--show-trace` is given
(cherry picked from commit 0b47783d0a879875d558f0b56e49584f25ceb2d0)
Change-Id: Ia0f18266dbcf97543110110c655c219c7a3e3270
Pretty-print values in the REPL by printing each item in a list or
attrset on a separate line. When possible, single-item lists and
attrsets are printed on one line, as long as they don't contain a nested
list, attrset, or thunk.
Before:
```
{ attrs = { a = { b = { c = { }; }; }; }; list = [ 1 ]; list' = [ 1 2 3 ]; }
```
After:
```
{
attrs = {
a = {
b = {
c = { };
};
};
};
list = [ 1 ];
list' = [
1
2
3
];
}
```
(cherry picked from commit c0a15fb7d03dfb8f53bc6726c414bc88aa362592)
Change-Id: Ia2b41849165a5ddb63f7a8c272a2476b3e4292df
While preparing PRs like #9753, I've had to change error messages in
dozens of code paths. It would be nice if instead of
EvalError("expected 'boolean' but found '%1%'", showType(v))
we could write
TypeError(v, "boolean")
or similar. Then, changing the error message could be a mechanical
refactor with the compiler pointing out places the constructor needs to
be changed, rather than the error-prone process of grepping through the
codebase. Structured errors would also help prevent the "same" error
from having multiple slightly different messages, and could be a first
step towards error codes / an error index.
This PR reworks the exception infrastructure in `libexpr` to
support exception types with different constructor signatures than
`BaseError`. Actually refactoring the exceptions to use structured data
will come in a future PR (this one is big enough already, as it has to
touch every exception in `libexpr`).
The core design is in `eval-error.hh`. Generally, errors like this:
state.error("'%s' is not a string", getAttrPathStr())
.debugThrow<TypeError>()
are transformed like this:
state.error<TypeError>("'%s' is not a string", getAttrPathStr())
.debugThrow()
The type annotation has moved from `ErrorBuilder::debugThrow` to
`EvalState::error`.
(cherry picked from commit c6a89c1a1659b31694c0fbcd21d78a6dd521c732)
Change-Id: Iced91ba4e00ca9e801518071fb43798936cbd05a
Don't print the first bracket in values in magenta in error messages
(cherry picked from commit 46a0625a40aef6946a35f92fdacf0e6b4a14414f)
Change-Id: I8435565c87db182116140eaeea9df1243e67ea94
Print the value in `error: cannot coerce` messages
(cherry picked from commit 5b7bfd2d6b89d7dd5f54c1ca6c8072358d31a84e)
===
test taken from 6e8d5983143ae576e3f4b1d2954a5267f2943a49; it was added
previously (and not backported because its pr was a mostly-revert), but
it's useful to have around.
Change-Id: Icbd14b55e3610ce7b774667bf14b82e6dc717982
libexpr: print value of what is attempted to be called as function
(cherry picked from commit 50e5d7b883042852538371237e32a66bb22f0485)
Change-Id: I7cb6290bd8f244e83bfce3b2eed2a4c8b4f16a83
Print the value in `value is X while a Y is expected` error
(cherry picked from commit 5f72a97092da6af28a7d2b2a50d74e9d34fae7e1)
Change-Id: Idb4bc903ae59a0f5b6fb3b1da4d47970fe0a6efe
Previously, there were two mostly-identical value printers -- one in
`libexpr/eval.cc` (which didn't force values) and one in
`libcmd/repl.cc` (which did force values and also printed ANSI color
codes).
This PR unifies both of these printers into `print.cc` and provides a
`PrintOptions` struct for controlling the output, which allows for
toggling whether values are forced, whether repeated values are tracked,
and whether ANSI color codes are displayed.
Additionally, `PrintOptions` allows tuning the maximum number of
attributes, list items, and bytes in a string that will be displayed;
this makes it ideal for contexts where printing too much output (e.g.
all of Nixpkgs) is distracting. (As requested by @roberth in
https://github.com/NixOS/nix/pull/9554#issuecomment-1845095735)
Please read the tests for example output.
Future work:
- It would be nice to provide this function as a builtin, perhaps
`builtins.toStringDebug` -- a printing function that never fails would
be useful when debugging Nix code.
- It would be nice to support customizing `PrintOptions` members on the
command line, e.g. `--option to-string-max-attrs 1000`.
(cherry picked from commit 0fa08b451682fb3311fe58112ff05c4fe5bee3a4, )
===
Restore ambiguous value printer for `nix-instantiate`
The Nix team has requested that this output format remain unchanged.
I've added a warning to the man page explaining that `nix-instantiate
--eval` output will not parse correctly in many situations.
(cherry picked from commit df84dd4d8dd3fd6381ac2ca3064432ab31a16b79)
Change-Id: I7cca6b4b53cd0642f2d49af657d5676a8554c9f8
Don't attempt to `git add` ignored files
(cherry picked from commit 359990dfdc713c80aabd7ea6f7e4528628fbe108)
===
also added a regression test that isn't upstream to be sure we're
actually fixing the bug.
Change-Id: I8267a3d0ece9909d8008b7435b90e7b3eee366f6
Factor out `ServeProto::Serialiser<UnkeyedValidPathInfo>` and test
(cherry picked from commit 139982997eec493a0f74105c427953f6be77da6d)
Change-Id: I28e4ba5a681a90d81915a56e6dbaa5456d64f96d
structured attrs: improve support / usage of NIX_ATTRS_{SH,JSON}_FILE
(cherry picked from commit 3c042f3b0b0a7ef9c47bf049f5410dbd4aac9e90)
Change-Id: I7e41838338ee1edf31fff6f9e354c3db2bba6c0e
Restore `builtins.pathExists` behavior on broken symlinks
(cherry picked from commit d53c8901ef7f2033855dd99063522e3d56a19dab)
===
note that this variant differs markedly from the source commit because
we haven't endured quite as much lazy trees.
Change-Id: I0facf282f21fe0db4134be5c65a8368c1b3a06fc
Include phase reporting in log file for ssh-ng builds
(cherry picked from commit b1e7d7cad625095656fff05ac4aedeb12135110a)
Change-Id: I4076669b0ba160412f7c628ca9113f9abbc8c303
It is possible to exfiltrate a file descriptor out of the build sandbox
of FODs, and use it to modify the store path after it has been
registered. To avoid that issue, don't register the output of the build,
but a copy of it (that will be free of any leaked file descriptor).
Test that we can't leverage abstract unix domain sockets to leak file
descriptors out of the sandbox and modify the path after it has been
registered.
(cherry picked from commit 2dadfeb690e7f4b8f97298e29791d202fdba5ca6)
(tests cherry picked from commit c854ae5b3078ac5d99fa75fe148005044809e18c)
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Co-authored-by: Theophane Hufschmitt <theophane.hufschmitt@tweag.io>
Co-authored-by: Tom Bereknyei <tomberek@gmail.com>
Change-Id: I87cd58f1c0a4f7b7a610d354206b33301e47b1a4
Define NixOS tests in `tests/nixos/default.nix` rather than `flake.nix`
(cherry picked from commit c29b8ba142a0650d1182ca838ddc1b2d273dcd2a)
Change-Id: Ieae1b6476d95024485df7067e008013bc5542039
When reviewing old PRs, I found that #9997 adds some code to ensure one
particular assert is always present. But, removing asserts isn't
something we do in our own release builds either in the flake here or in
nixpkgs, and is plainly a bad idea that increases support burden,
especially if other distros make bad choices of build flags in their Nix
packaging.
For context, the assert macro in the C standard is defined to do nothing
if NDEBUG is set.
There is no way in our build system to set -DNDEBUG without manually
adding it to CFLAGS, so this is simply a configuration we do not use.
Let's ban it at compile time.
I put this preprocessor directive in src/libutil.cc because it is not
obvious where else to put it, and it seems like the most logical file
since you are not getting a usable nix without it.
Upstream-PR: https://github.com/NixOS/nix/pull/10126
Original-Change-Id: I513cceaac1371decb3d96231e6ef9181c910c218
Change-Id: I531a51f6348a746e8e41d88203b08f614898356c
Rebecca Turner
jade
Qyriad
eldritch horrors
Winter Cute
Lunaphied
puck