We only allow channel/latest anyway, so it really doesn't make sense to
explicitly specify this in the PathPart and provide other dispatcher
once we have more than just "latest", which greatly simplifies the
dispatch tree.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
We now have a column for that, so no need for counting rows which was a
bit inefficient anyway, because we only would have needed the first row
in the result.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Now that we have our dedicated "Channels" tab, there is no need anymore
to show redundant information.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
We now no longer need that additional join of the build outputs and can
solely use the isChannel column of the Builds table to determine whether
it's a channel build.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This is to properly separate channels from regular jobs and also make
sure that we can always iterate on them, no matter whether the build has
failed. The reason why we were not able to do this until now was because
we were iterating on the build products, and whenever some constituent
of a channel job has failed, we didn't get a build output.
So whenever there is a meta.isHydraChannel, we can now properly
distinguish it from the other jobs.
I still don't have any clue, why "make -C src/sql update-dbix" without
*any* modifications tries to create additional schema definitions. But
I've checked the md5sums of the existing schema definitions and they
don't seem to match, so it seems that they already have been tampered
with.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Now we can provide different channel expressions for one particular
channel build. Not sure yet how this would be useful, but I found it
more appropriate to use a type instead of a subtype of "file".
This should get us consistent with the provious commit.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This is to get a bit more consistency among channel builds but doesn't
do a radical change on the display. Ideally we may want to have a
channel overview with all the constituents and a small help showing how
the user can add the channel.
Unfortunately, this also introduces an inconsistency: We previously used
the *subtype* "channel", but now we're expecting "channel" as the type
of the product, so we need to change this for the channels overview as
well.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
It's very similar to "jobs" and the code is pretty much the same, except
that we don't do filtering on it. At least it doesn't waste space for a
filter option when there are usually WAY less channel jobs than ordinary
jobs.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Builds can now emit metrics that Hydra will store in its database and
render as time series via flot charts. Typical applications are to
keep track of performance indicators, coverage percentages, artifact
sizes, and so on.
For example, a coverage build can emit the coverage percentage as
follows:
echo "lineCoverage $pct %" > $out/nix-support/hydra-metrics
Graphs of all metrics for a job can be seen at
http://.../job/<project>/<jobset>/<job>#tabs-charts
Specific metrics are also visible at
http://.../job/<project>/<jobset>/<job>/metric/<metric>
The latter URL also allows getting the data in JSON format (e.g. via
"curl -H 'Accept: application/json'").
Without an index on (machine, stoptime desc), this requires a
sequential scan. And adding a whole index for this seems
overkill. (Possibly the queue runner could maintain this info more
efficiently.)
Hydra-queue-runner now no longer polls the queue periodically, but
instead sleeps until it receives a notification from PostgreSQL about
a change to the queue (build added, build cancelled or build
restarted).
Also, for the "build added" case, we now only check for builds with an
ID greater than the previous greatest ID. This is much more efficient
if the queue is large.
This removes the need for Nix's build-remote.pl.
Build logs are now written to $HYDRA_DATA/build-logs because
hydra-queue-runner doesn't have write permission to /nix/var/log.
Scheduling is mostly based on jobset shares these days. So showing and
sorting by priority just wastes space and gives the incorrect
impression that Hydra executes builds in the order shown on the queue
page.
These give warnings in Perl >= 5.18:
given is experimental at /home/hydra/src/hydra/src/lib/Hydra/Helper/CatalystUtils.pm line 241.
when is experimental at /home/hydra/src/hydra/src/lib/Hydra/Helper/CatalystUtils.pm line 242.
...
This adds a Hydra plugin for users to submit their open source projects
to the Coverity Scan system for analysis.
First, add a <coverityscan> section to your Hydra config, including the
access token, project name, and email, and a regex specifying jobs to
upload:
<coverityscan>
project = testrix
jobs = foobar:.*:coverity.*
email = aseipp@pobox.com
token = ${builtins.readFile ./coverity-token}
</coverityscan>
This will upload the scan results for any job whose name matches
'coverity.*' in any jobset in the Hydra 'foobar' project, for the
Coverity Scan project named 'testrix'.
Note that one upload will occur per job matched by the regular
expression - so be careful with how many builds you upload.
The jobs which are matched by the jobs specification must have a file in
their output path of the form:
$out/tarballs/...-cov-int.(xz|lzma|zip|bz2|tgz)
The file must have the 'cov-int' directory produced by `cov-build` in
the root.
(You can also output something into
$out/nix-support/hydra-build-products for the Hydra UI.)
This file will be found in the store, and uploaded to the service
directly using your access credentials. Note the exact extension: don't
use .tar.xz, only use .xz specifically.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Fixes errors like:
Caught exception in engine "Wide character in syswrite at /nix/store/498lwsrn5kkdh1q8kn3vcpd3457w6m7a-hydra-perl-deps/lib/perl5/site_perl/5.16.3/Starman/Server.pm line 547."
Note that these errors didn't happen if the database encoding was set
to SQL_ASCII (which was the case for hydra.nixos.org, explaining why
it didn't get these errors). However, now the encoding must be
UTF8. To change it, do:
update pg_database set encoding = pg_char_to_encoding('UTF8') where datname = 'hydra';
This gets rid of the warning:
DBIx::Class::Storage::DBI::select_single(): Query returned more than one row. SQL that returns multiple rows is DEPRECATED for ->find and ->single at /home/eelco/Dev/hydra/src/script/../lib/Hydra/Controller/Project.pm line 15
In the dashboard and on the job page, indicate whether the job appears
in the latest jobset eval. That way, the user gets some indication if
a job has accidentally disappeared (e.g. due to an evaluation error).
Use the following in your hydra.conf to make your instance a
private Hydra instance (public is the default):
private 1
Currently, this will not allow you to use the API, channels
and the binary cache when running in private mode. We will add
solutions for these functionalities later.
This requires adding the following to hydra.conf:
binary_cache_key_name = <key-name>
binary_cache_private_key_file = <path-to-private-key>
e.g.
binary_cache_key_name = hydra.nixos.org-1
binary_cache_private_key_file = /home/hydra/cache-key.sec
All successful, non-garbage-collected builds in the evaluation are
passed in a attribute set. So if you declare a Hydra input named
‘foo’ of type ‘eval’, you get a set with members ‘foo.<jobname>’. For
instance, if you passed a Nixpkgs eval as an input named ‘nixpkgs’,
then you could get the Firefox build for x86_64-linux as
‘nixpkgs.firefox.x86_64-linux’.
Inputs of type ‘eval’ can be specified in three ways:
* As the number of the evaluation.
* As a jobset identifier (‘<project>:<jobset>’), which will yield the
latest finished evaluation of that jobset. Note that there is no
guarantee that any job in that evaluation has succeeded, so it might
not be very useful.
* As a job identifier (‘<project>:<jobset>:<job>’), which will yield
the latest finished evaluation of that jobset in which <job>
succeeded. In conjunction with aggregate jobs, this allows you to
make sure that the evaluation contains the desired builds.
This reverts commit 2d7e106d29.
Unfortunately some jobsets still depend on this behaviour. They could
probably do something like "assert system == input.system; ..." but
changing them all is undesirable.
Include information about who changed the build status in notification
emails, and enable optional per-input notification of said committers.
Conflicts due to two branches modifying the database schema.
Signed-off-by: Shea Levy <shea@shealevy.com>
Conflicts:
src/lib/Hydra/Schema/Jobsets.pm
src/sql/upgrade-23.sql
Currently the dashboard allows users to get a quick overview of the
status of jobs they're interested in, but more will be added,
e.g. viewing all your jobsets or all jobs of which you're a
maintainer.
There are jobsets that are evaluated only once, that is, after they've
been evaluated, they're disabled automatically. This is primarily
useful for doing releases: for instance, doing an evaluation with
"officialRelease" set to "true" should be done only once.
