Starts progress on #5729.
The idea is that we should not have these default methods throwing
"unimplemented". This is a small step in that direction.
I kept `addTempRoot` because it is a no-op, rather than failure. Also,
as a practical matter, it is called all over the place, while doing
other tasks, so the downcasting would be annoying.
Maybe in the future I could move the "real" `addTempRoot` to `GcStore`,
and the existing usecases use a `tryAddTempRoot` wrapper to downcast or
do nothing, but I wasn't sure whether that was a good idea so with a
bias to less churn I didn't do it yet.
We now memoize on Bindings / list element vectors rather than Values,
so that e.g. two Values that point to the same Bindings will be
printed only once.
This is useful whenever we want to evaluate something to a store path
(e.g. in get-drvs.cc).
Extracted from the lazy-trees branch (where we can require that a
store path must come from a store source tree accessor).
This was introduced in #6174. However fetch{url,Tarball} are legacy
and we shouldn't have an undocumented attribute that does the same
thing as one that already exists ('sha256').
Starting work on #5638
The exact boundary between `FetchSettings` and `EvalSettings` is not
clear to me, but that's fine. First lets clean out `libstore`, and then
worry about what, if anything, should be the separation between those
two.
To avoid that JSON messages are parsed twice in case of
remote builds with `ssh-ng://`, I split up the original
`handleJSONLogMessage` into three parts:
* `parseJSONMessage(const std::string&)` checks if it's a message in the
form of `@nix {...}` and tries to parse it (and prints an error if the
parsing fails).
* `handleJSONLogMessage(nlohmann::json&, ...)` reads the fields from the
message and passes them to the logger.
* `handleJSONLogMessage(const std::string&, ...)` behaves as before, but
uses the two functions mentioned above as implementation.
In case of `ssh-ng://`-logs the first two methods are invoked manually.
Right now when building a derivation remotely via
$ nix build -j0 -f . hello -L --builders 'ssh://builder'
it's possible later to read through the entire build-log by running
`nix log -f . hello`. This isn't possible however when using `ssh-ng`
rather than `ssh`.
The reason for that is that there are two different ways to transfer
logs in Nix through e.g. an SSH tunnel (that are used by `ssh`/`ssh-ng`
respectively):
* `ssh://` receives its logs from the fd pointing to `builderOut`. This
is directly passed to the "log-sink" (and to the logger on each `\n`),
hence `nix log` works here.
* `ssh-ng://` however expects JSON-like messages (i.e. `@nix {log data
in here}`) and passes it directly to the logger without doing anything
with the `logSink`. However it's certainly possible to extract
log-lines from this format as these have their own message-type in the
JSON payload (i.e. `resBuildLogLine`).
This is basically what I changed in this patch: if the code-path for
`builderOut` is not reached and a `logSink` is initialized, the
message was successfully processed by the JSON logger (i.e. it's in
the expected format) and the line is of the expected type (i.e.
`resBuildLogLine`), the line will be written to the log-sink as well.
Closes#5079
diff-index operates on the view that git has of the working tree,
which might be outdated. The higher-level diff command does this
automatically. This change also adds handling for submodules.
fixes#4140
Alternative fixes would be invoking update-index before diff-index or
matching more closely what require_clean_work_tree from git-sh-setup.sh
does, but both those options make it more difficult to reason about
correctness.
The .git/refs/heads directory might be empty for a valid
usable git repository. This often happens in CI environments,
which might only fetch commits, not branches.
Therefore instead we let git itself check if HEAD points to
something that looks like a commit.
fixes#5302
On Nix 2.6 the output of `nix why-depends --all` seems to be somewhat
off:
$ nix why-depends /nix/store/kn47hayxab8gc01jhr98dwyywbx561aq-nixos-system-roflmayr-21.11.20220207.6c202a9.drv /nix/store/srn5jbs1q30jpybdmxqrwskyny659qgc-nix-2.6.drv --derivation --extra-experimental-features nix-command --all
/nix/store/kn47hayxab8gc01jhr98dwyywbx561aq-nixos-system-roflmayr-21.11.20220207.6c202a9.drv
└───/nix/store/g8bpgfjhh5vxrdq0w6r6s64f9kkm9z6c-etc.drv
│ └───/nix/store/hm0jmhp8shbf3cl846a685nv4f5cp3fy-nspawn-inst.drv
| [...]
└───/nix/store/2d6q3ygiim9ijl5d4h0qqx6vnjgxywyr-system-units.drv
└───/nix/store/dil014y1b8qyjhhhf5fpaah5fzdf0bzs-unit-systemd-nspawn-hydra.service.drv
└───/nix/store/a9r72wwx8qrxyp7hjydyg0gsrwnn26zb-activate.drv
└───/nix/store/99hlc7i4gl77wq087lbhag4hkf3kvssj-nixos-system-hydra-21.11pre-git.drv
Please note that `[...]-system-units.drv` is supposed to be a direct
child of `[...]-etc.drv`.
The reason for that is that each new level printed by `printNode` is
four spaces off in comparison to `nix why-depends --precise` because the
recursive `printNode()` only prints the path and not the `tree*`-chars in
the case of `--precise` and in this format the path is four spaces further
indented, i.e. on a newline, but on the same level as the path's children, i.e.
/nix/store/kn47hayxab8gc01jhr98dwyywbx561aq-nixos-system-roflmayr-21.11.20220207.6c202a9.drv
└───/: …1-p8.drv",["out"]),("/nix/store/g8bpgfjhh5vxrdq0w6r6s64f9kkm9z6c-etc.drv",["out"]),("/nix/store/…
→ /nix/store/g8bpgfjhh5vxrdq0w6r6s64f9kkm9z6c-etc.drv
As you can see `[...]-etc.drv` is a direct child of the root, but four
spaces indented. This logic was directly applied to the code-path with
`precise=false` which resulted in `tree*` being printed four spaces too
deep.
In case of no `--precise`, `hits[hash]` is empty and the path itself
should be printed rather than hits using the same logic as for `hits[hash]`.
With this fix, the output looks correct now:
/nix/store/kn47hayxab8gc01jhr98dwyywbx561aq-nixos-system-roflmayr-21.11.20220207.6c202a9.drv
└───/nix/store/g8bpgfjhh5vxrdq0w6r6s64f9kkm9z6c-etc.drv
├───/nix/store/hm0jmhp8shbf3cl846a685nv4f5cp3fy-nspawn-inst.drv
| [...]
└───/nix/store/2d6q3ygiim9ijl5d4h0qqx6vnjgxywyr-system-units.drv
└───/nix/store/dil014y1b8qyjhhhf5fpaah5fzdf0bzs-unit-systemd-nspawn-hydra.service.drv
└───/nix/store/a9r72wwx8qrxyp7hjydyg0gsrwnn26zb-activate.drv
└───/nix/store/99hlc7i4gl77wq087lbhag4hkf3kvssj-nixos-system-hydra-21.11pre-git.drv
This changes the representation of the interrupt callback list to
be safe to use during interrupt handling.
Holding a lock while executing arbitrary functions is something to
avoid in general, because of the risk of deadlock.
Such a deadlock occurs in https://github.com/NixOS/nix/issues/3294
where ~CurlDownloader tries to deregister its interrupt callback.
This happens during what seems to be a triggerInterrupt() by the
daemon connection's MonitorFdHup thread. This bit I can not confirm
based on the stack trace though; it's based on reading the code,
so no absolute certainty, but a smoking gun nonetheless.
previously :a would override old bindings of a name with new values if the added
set contained names that were already bound. in nix 2.6 this doesn't happen any
more, which is potentially confusing.
fixes#6041
At this point, we don’t know if the input is a flake or not. So, we
should allow the user to override the input with a directory without a
flake.nix.
Ideally, we could figure whether the input was originally a flake or
not, but that would require instantiating the whole flake. So just
allow it to be missing here, and rely on checks later on to verify the
input for us.
Bundlers are now responsible for correctly handling their inputs which
are no longer constrained to be (Drv->Drv)->Drv->Drv, but can be of
type (attrset->Drv)->attrset->Drv.
we'll retain the old coerceToString interface that returns a string, but callers
that don't need the returned value to outlive the Value it came from can save
copies by using the new interface instead. for values that weren't stringy we'll
pass a new buffer argument that'll be used for storage and shouldn't be
inspected.
Robert Hensing
Maximilian Bosch
Linus Heckemann
Sergei Trofimovich