Commit graph

9798 commits

Author SHA1 Message Date
regnat c092fa4702 Allow non-CA derivations to depend on CA derivations 2020-10-27 07:29:23 +01:00
Eelco Dolstra 343239fc8a Allow nix.conf options to be set in flake.nix
This makes it possible to have per-project configuration in flake.nix,
e.g. binary caches and other stuff:

  nixConfig.bash-prompt-suffix = "ngi# ";
  nixConfig.substituters = [ "https://cache.ngi0.nixos.org/" ];
2020-10-26 20:45:39 +01:00
Eelco Dolstra 731edf0d9b isTrivial(): Support trivial lists 2020-10-26 20:37:11 +01:00
Eelco Dolstra 14aecbb288 BaseSetting<StringMap>::set(): Don't append to previous value 2020-10-26 20:36:46 +01:00
Eelco Dolstra b875b8f45c Remove edition field 2020-10-26 17:59:36 +01:00
Eelco Dolstra 1e66d146a3 Fix test 2020-10-26 17:59:32 +01:00
Eelco Dolstra 9d5e9ef0da Move Explicit 2020-10-26 17:01:20 +01:00
Eelco Dolstra dc7d1322ef Make the prompt used in development shells configurable 2020-10-26 14:24:25 +01:00
Eelco Dolstra ac0e24f21b Revert "Bump version to 3.0"
This reverts commit 189e6f5e1d.

After some discussion, it seems better not to bump the major version
number since most of the new features since 2.3 are marked
experimental.
2020-10-26 11:30:18 +01:00
tnias c189cf7e33
Add sha512 to hashAlgo listings in manpages (#4186) 2020-10-25 22:16:53 +00:00
Eelco Dolstra a78582c70f
Merge pull request #4161 from edolstra/nix-develop-redirects
nix develop: Add --redirect flag to redirect dependencies
2020-10-22 13:45:59 +02:00
Eelco Dolstra 750ce500c2 Fix clang build 2020-10-22 13:40:30 +02:00
Eelco Dolstra f9438fb64a nix develop: Add --redirect flag to redirect dependencies
This is primarily useful if you're hacking simultaneously on a package
and one of its dependencies. E.g. if you're hacking on Hydra and Nix,
you would start a dev shell for Nix, and then a dev shell for Hydra as
follows:

  $ nix develop \
    --redirect .#hydraJobs.build.x86_64-linux.nix ~/Dev/nix/outputs/out \
    --redirect .#hydraJobs.build.x86_64-linux.nix.dev ~/Dev/nix/outputs/dev

(This assumes hydraJobs.build.x86_64-linux has a passthru.nix
attribute. You can also use a store path.)

This causes all references in the environment to those store paths to
be rewritten to ~/Dev/nix/outputs/{out,dev}. Note: unfortunately, you
may need to set LD_LIBRARY_PATH=~/Dev/nix/outputs/out/lib because
Nixpkgs' ld-wrapper only adds -rpath entries for -L flags that point
to the Nix store.
2020-10-22 13:40:30 +02:00
Eelco Dolstra 21830cb044
Merge pull request #4177 from knedlsepp/fix-NIX_CONFIG-doc
Fix the docs about the new NIX_CONFIG env var
2020-10-21 18:05:28 +02:00
Eelco Dolstra e556a1beb7 nix develop: Handle 'declare -ax' in bash output
Fixes 'nix develop nixpkgs#qpdfview'.
2020-10-21 17:54:21 +02:00
Josef Kemetmüller 7f60f48e1a Fix the docs about the new NIX_CONFIG env var
This was accidentally documented as NIX_OPTIONS.
2020-10-21 17:04:36 +02:00
Eelco Dolstra ecfebde6ff
Merge pull request #4166 from kampka/nix-conf-env
Add NIX_CONFIG env var for applying nix.conf overrides
2020-10-21 14:26:45 +02:00
Eelco Dolstra bdf2bcc989 Remove conf-file.xml
This was probably revived in a bad merge.
2020-10-21 14:24:26 +02:00
Christian Kampka 461cf2b856
Add NIX_CONFIG env var for applying nix.conf overrides 2020-10-21 13:41:26 +02:00
Yuriy Taraday 39fbd3d828 Fix iterating over $NIX_PROFILES in Zsh
NIX_PROFILES is space separated list of directories, and passing it into
for as is is considered to be 1-element list with the whole string. With
shwordsplit option Zsh emulates other shells in this regard ans
implicitely splits unquoted strings into words.

Fixes #4167.
2020-10-21 00:03:38 +04:00
Eelco Dolstra 21244e1062
Merge pull request #4168 from mkenigs/fix-3975
Make bash non-interactive for nix develop --phase
2020-10-20 19:15:32 +02:00
Matthew Kenigsberg f6aaac2b59 Make bash non-interactive for nix develop --phase
Fix #3975: Currently if Ctrl-C is pressed during a phase, the interactive subshell
is not exited. Removing --rcfile when --phase is present makes bash
non-interactive
2020-10-20 12:00:30 -05:00
Domen Kožar e0ca98c207
Merge pull request #3996 from abathur/macos_big_sur_fixes
Macos big sur installer fixes
2020-10-20 12:18:23 +02:00
Travis A. Everett f289bdb9d4 discourage casual Big Sur installs 2020-10-19 12:28:08 -05:00
Travis A. Everett c40bad4151 create missing profile files to fix zsh envvars
Env vars for ZSH were moved from /etc/zshrc to /etc/zshenv in #3608
to address an issue with zshrc getting clobbered by OS updates, but
/etc/zshenv doesn't exist by default--so *nothing* would get set up
for zsh users unless they already happened to have /etc/zshenv.

Creating these files if they don't exist. Also cut separate creation
of profile.d/nix.sh, which isn't needed now.
2020-10-19 12:25:52 -05:00
Travis A. Everett b719f686a8 fix skipped multi-user install steps on macOS
Some of the changes in #3788 to support non-systemd Nix installs
don't appear to be aware that the darwin installer exists, which
resulted in some skipped steps and inappropriate instructions.
2020-10-19 12:25:52 -05:00
Travis A. Everett 3a8699ac4f restore create-darwin-volume to release tarball
The move from release.nix to flake.nix appears to have lost some
changes from #3628 / 1c56f18a8122b605c28000e295d5e223f272cccd, leaving
create-darwin-volume.sh out of the release tarball.

Under the assumption that this was just an accident/byproduct of when
flake.nix split off and not intentional, I am restoring those edits.
2020-10-19 12:25:52 -05:00
Travis A. Everett fe807904e5 adapt to apfs.util flag diff in catalina/big sur
Fixes #3957. Just runs both forms to minimize moving parts.
2020-10-19 12:24:31 -05:00
Travis A. Everett e736f8f6e4 replace xpath with xmllint --xpath; simplify
As mentioned in previous commit, Big Sur changes the syntax for the
xpath command slightly.

In the process of testing out replacements for these, I noticed a few
small simplification wins.
2020-10-19 12:24:04 -05:00
Travis A. Everett 1f02b65c59 fix xpath and conditional bugs; xpath -> xmllint
- xpath -> xmllint: xpath's cli interface changed in Big Sur
  rather than add conditional logic for picking the correct
  syntax for xpath, I'm changing to xmllint --xpath, which
  appears to be consistent across versions I've tested...

- /plist/dict/key[text()='Writable']/following-sibling::true[1]
  doesn't do quite what's expected. It was written to try to
  select a <true /> node paired with the Writable key, but it
  will also select the *next* <true /> node that appears even
  if it was paired with another key.

- I think there's also a logic bug in the conditionals here.
  I'm not sure anyone ever actuall saw it, thanks to the xpath
  bug, though. With the xpath fix, this conditional passes if /nix
  does not exist, / IS writable, and the version is Catalina+.

  I think it meant to test for /nix does not exist, / is NOT
  writable, and the version is Catalina+. I reworked this lightly
  to make it a little clearer at the code level.
2020-10-19 12:23:29 -05:00
Travis A. Everett 9c3dc9d7ca update macOS version handling for Big Sur
Keeping this commit narrow for reviewability, but some of these
conditionals will change in subsequent commits in this PR.

Fixes #3852.
2020-10-19 12:22:30 -05:00
Eelco Dolstra 9635fb77bd
Merge pull request #4080 from kquick/kwq/flake-int-doc
Add some internal documentation for flake support objects.
2020-10-19 11:29:12 +02:00
Eelco Dolstra 05347387e7
Merge pull request #4162 from edolstra/nixpkgs-20.09
Switch to Nixpkgs 20.09
2020-10-19 11:26:00 +02:00
Eelco Dolstra c27fcd94ce Remove buildStatic from checks
checks should be relatively fast, but buildStatic depends on a lot of
stuff that isn't in the binary cache (e.g. musl builds of Git and
Mercurial that we probably don't need since we don't link against
them...).
2020-10-18 21:44:07 +02:00
Eelco Dolstra 62cf1d815a Switch to Nixpkgs 20.09 2020-10-18 21:31:27 +02:00
Eelco Dolstra 532d2bc189 flake.lock: Update
Flake input changes:

* Updated 'nixpkgs': 'github:NixOS/nixpkgs/3a10a004bb5802d5f23c58886722e4239705e733' -> 'github:NixOS/nixpkgs/ad0d20345219790533ebe06571f82ed6b034db31'
2020-10-18 21:20:35 +02:00
Eelco Dolstra 20a7d8d23a Add some missing clean-files 2020-10-18 20:32:59 +02:00
Eelco Dolstra 93bd014c8c Update .gitignore 2020-10-18 20:32:46 +02:00
Eelco Dolstra fda835b231
Merge pull request #4143 from obsidiansystems/typed-goal-maps
Properly type the derivation and substitution goal maps
2020-10-18 18:12:21 +02:00
Eelco Dolstra 6bca8f82c7
Merge pull request #4157 from SFrijters/doc-nix-shell-pure-bashrc
doc: nix-shell in pure mode does *not* source user bashrc
2020-10-18 18:10:18 +02:00
Eelco Dolstra 67cc94b80b
Merge pull request #4158 from hercules-ci/issue-3964-substitution-loop
Fix substitution loop #3964, #3534
2020-10-18 18:09:11 +02:00
Robert Hensing bd9eb5c743 DerivationGoal: only retry if output closure incomplete is only problem 2020-10-18 14:26:37 +02:00
Robert Hensing ea8d32020e Tests for #3964 2020-10-18 14:26:37 +02:00
Robert Hensing 94f1e4a441 Typo 2020-10-18 14:26:37 +02:00
Stefan Frijters a53438d18f
doc: nix-shell in pure mode does *not* source user bashrc 2020-10-18 14:26:05 +02:00
John Ericson 7ed46c1574 Explain that upcast_goal is still a static cast 2020-10-17 21:50:12 +00:00
John Ericson 57d0432b39 Just use auto in two places. 2020-10-17 21:47:52 +00:00
John Ericson e6f8ae56d8 tab -> space 2020-10-17 21:45:31 +00:00
John Ericson 619d262c97 Merge remote-tracking branch 'upstream/master' into typed-goal-maps 2020-10-17 21:44:27 +00:00
Eelco Dolstra 05e6fe69f9
Merge pull request #4156 from aszlig/vm-test-python
Convert VM tests to Python
2020-10-17 23:40:44 +02:00