Commit graph

918 commits

Author SHA1 Message Date
Eelco Dolstra 6cc2a8f8ed computeFSClosure: Only process the missing/corrupt paths
Issue #122.
2013-06-13 16:43:20 +02:00
Eelco Dolstra f9ff67e948 In repair mode, update the hash of rebuilt paths
Otherwise subsequent invocations of "--repair" will keep rebuilding
the path.  This only happens if the path content differs between
builds (e.g. due to timestamps).
2013-06-13 14:46:07 +02:00
Eelco Dolstra 2ee9da9e22 In trace messages, don't print the output path
This doesn't work if there is no output named "out".  Hydra didn't use
it anyway.
2013-05-10 00:24:33 +02:00
Eelco Dolstra 6eba05613a Communicate build timeouts to Hydra 2013-05-09 18:39:04 +02:00
Eelco Dolstra 69b8f9980f build-remote.pl: Enforce timeouts locally
Don't pass --timeout / --max-silent-time to the remote builder.
Instead, let the local Nix process terminate the build if it exceeds a
timeout.  The remote builder will be killed as a side-effect.  This
gives better error reporting (since the timeout message from the
remote side wasn't properly propagated) and handles non-Nix problems
like SSH hangs.
2013-05-09 17:17:17 +02:00
Eelco Dolstra 772b70952f Fix --timeout
I'm not sure if it has ever worked correctly.  The line "lastWait =
after;" seems to mean that the timer was reset every time a build
produced log output.

Note that the timeout is now per build, as documented ("the maximum
number of seconds that a builder can run").
2013-04-23 18:04:59 +02:00
Eelco Dolstra 934cf2d1f4 Nix daemon: respect build timeout from the client 2013-04-23 16:59:06 +02:00
Eelco Dolstra 258897c265 Complain if /homeless-shelter exists 2013-04-04 11:16:26 +02:00
Eelco Dolstra bdd4646338 Revert "Prevent config.h from being clobbered"
This reverts commit 28bba8c44f.
2013-03-08 01:24:59 +01:00
Eelco Dolstra 28bba8c44f Prevent config.h from being clobbered 2013-03-07 23:55:55 +01:00
Eelco Dolstra 5526a282b5 Security: Don't allow builders to change permissions on files they don't own
It turns out that in multi-user Nix, a builder may be able to do

  ln /etc/shadow $out/foo

Afterwards, canonicalisePathMetaData() will be applied to $out/foo,
causing /etc/shadow's mode to be set to 444 (readable by everybody but
writable by nobody).  That's obviously Very Bad.

Fortunately, this fails in NixOS's default configuration because
/nix/store is a bind mount, so "ln" will fail with "Invalid
cross-device link".  It also fails if hard-link restrictions are
enabled, so a workaround is:

  echo 1 > /proc/sys/fs/protected_hardlinks

The solution is to check that all files in $out are owned by the build
user.  This means that innocuous operations like "ln
${pkgs.foo}/some-file $out/" are now rejected, but that already failed
in chroot builds anyway.
2013-02-26 02:30:19 +01:00
Ludovic Courtès 5ea138dc4b Enable chroot support on old glibc versions. 2013-02-19 10:19:11 +01:00
Eelco Dolstra 536c85ea49 Store build logs in /nix/var/log/nix/drvs/<XX>
...where <XX> is the first two characters of the derivation.
Otherwise /nix/var/log/nix/drvs may become so large that we run into
all sorts of weird filesystem limits/inefficiences.  For instance,
ext3/ext4 filesystems will barf with "ext4_dx_add_entry:1551:
Directory index full!" once you hit a few million files.
2013-01-17 15:47:26 +01:00
Eelco Dolstra def5160b61 Clear any immutable bits in the Nix store
Doing this once makes subsequent operations like garbage collecting
more efficient since we don't have to call makeMutable() first.
2013-01-03 12:59:23 +01:00
Eelco Dolstra 299141ecbd If a substitute closure is incomplete, build dependencies, then retry the substituter
Issue #77.
2013-01-02 12:38:28 +01:00
Eelco Dolstra 1b3a78a459 Automatically fall back if the references of a substitute are not substitutable
Fixes #77.
2013-01-02 12:00:26 +01:00
Eelco Dolstra b7629778ef Allow mounting a path in a different location in the chroot
Fixes #24.
2012-12-29 23:04:02 +01:00
Eelco Dolstra fbf0b2fa45 Kill the build hook rather than shutting it down cleanly
Waiting for the hook to shut down cleanly sometimes seems to lead to
hangs.
2012-12-19 11:47:42 +01:00
Eelco Dolstra 228ea7c2f9 Revert brain fart
This reverts commit cc511fd65b.
2012-12-18 20:43:47 +01:00
Eelco Dolstra cc511fd65b Check for potential infinite select() loops when building 2012-12-18 18:50:05 +01:00
Eelco Dolstra 8d8d47abd2 Only substitute wanted outputs of a derivation
If a derivation has multiple outputs, then we only want to download
those outputs that are actuallty needed.  So if we do "nix-build -A
openssl.man", then only the "man" output should be downloaded.
Likewise if another package depends on ${openssl.man}.

The tricky part is that different derivations can depend on different
outputs of a given derivation, so we may need to restart the
corresponding derivation goal if that happens.
2012-11-26 17:15:09 +01:00
Eelco Dolstra 46a369ad95 Make "nix-build -A <derivation>.<output>" do the right thing
For example, given a derivation with outputs "out", "man" and "bin":

  $ nix-build -A pkg

produces ./result pointing to the "out" output;

  $ nix-build -A pkg.man

produces ./result-man pointing to the "man" output;

  $ nix-build -A pkg.all

produces ./result, ./result-man and ./result-bin;

  $ nix-build -A pkg.all -A pkg2

produces ./result, ./result-man, ./result-bin and ./result-2.
2012-11-26 15:39:10 +01:00
Eelco Dolstra f794465ca8 Disable use of vfork()
vfork() is just too weird.  For instance, in this build:

  http://hydra.nixos.org/build/3330487

the value fromHook.writeSide becomes corrupted in the parent, even
though the child only reads from it.  At -O0 the problem goes away.
Probably the child is overriding some spilled temporary variable.

If I get bored I may implement using posix_spawn() instead.
2012-11-15 19:35:18 +01:00
Eelco Dolstra 8541d27fce Don't use std::cerr in a few places
Slightly scared of using std::cerr in a vforked process...
2012-11-15 15:01:02 +01:00
Eelco Dolstra ea89df2b76 Use vfork() instead of fork() if available
Hopefully this reduces the chance of hitting ‘unable to fork: Cannot
allocate memory’ errors.  vfork() is used for everything except
starting builders.
2012-11-09 18:00:33 +01:00
Eelco Dolstra 198dbe7fa1 Remove some redundant close() calls
They are unnecessary because we set the close-on-exec flag.
2012-11-09 16:58:51 +01:00
Eelco Dolstra 10dcee99ed Remove the quickExit function 2012-11-09 16:42:10 +01:00
Eelco Dolstra 4c34d384e6 If hashes do not match, print them in base-32 for SHA-1/SHA-256
Fixes #57.
2012-10-23 18:05:50 +02:00
Eelco Dolstra e345182055 Shorten the names of temporary build directories 2012-10-11 14:03:06 -04:00
Eelco Dolstra 2bbc4a214e nix-env: Support ‘--repair’ flag 2012-10-03 15:35:42 -04:00
Eelco Dolstra a807edfae8 Handle repairing paths that are in build-chroot-dirs 2012-10-03 11:20:16 -04:00
Eelco Dolstra a3f205b249 When repairing a derivation, check and repair the entire output closure
If we find a corrupted path in the output closure, we rebuild the
derivation that produced that particular path.
2012-10-03 10:38:09 -04:00
Eelco Dolstra 2001895f3d Add a --repair flag to ‘nix-store -r’ to repair derivation outputs
With this flag, if any valid derivation output is missing or corrupt,
it will be recreated by using a substitute if available, or by
rebuilding the derivation.  The latter may use hash rewriting if
chroots are not available.
2012-10-02 17:13:46 -04:00
Eelco Dolstra 9958bd6992 Add operation ‘nix-store --repair-path’
This operation allows fixing corrupted or accidentally deleted store
paths by redownloading them using substituters, if available.

Since the corrupted path cannot be replaced atomically, there is a
very small time window (one system call) during which neither the old
(corrupted) nor the new (repaired) contents are available.  So
repairing should be used with some care on critical packages like
Glibc.
2012-10-02 14:08:59 -04:00
Eelco Dolstra e666e1156f Handle octal escapes in /proc/self/mountinfo 2012-09-28 21:39:30 -04:00
Eelco Dolstra f406288cc7 Print a more descriptive error message if setting up the build environment fails 2012-09-28 21:37:02 -04:00
Eelco Dolstra b9c2b4d5b4 Remove setting of the immutable bit
Using the immutable bit is problematic, especially in conjunction with
store optimisation.  For instance, if the garbage collector deletes a
file, it has to clear its immutable bit, but if the file has
additional hard links, we can't set the bit afterwards because we
don't know the remaining paths.

So now that we support having the entire Nix store as a read-only
mount, we may as well drop the immutable bit.  Unfortunately, we have
to keep the code to clear the immutable bit for backwards
compatibility.
2012-09-19 16:17:54 -04:00
Eelco Dolstra 76e88871b2 Templatise tokenizeString() 2012-09-19 15:43:23 -04:00
Eelco Dolstra 00092b2d35 Keep build directory if not all expected outputs were produced
Fixes issue #123 in Nixpkgs.
2012-09-18 10:11:42 -04:00
Eelco Dolstra e56f71edaf In startBuilder(), only print the new paths we're building 2012-09-13 10:06:24 -04:00
Eelco Dolstra 479e9172b3 Build hook: Pass the timeout to the remote builder
Note that this will only work if the client has a very recent Nix
version (post 15e1b2c223), otherwise the
--option flag will just be ignored.

Fixes #50.
2012-09-12 12:18:14 -04:00
Eelco Dolstra 5e2ffd0b8a Fix "non-zero padding" error
Probably it's not a good idea to pass a temporary object to
StringSource.
2012-09-11 19:09:01 -04:00
Eelco Dolstra 8cf672091e Support building a derivation if some outputs are already valid (non-chroot case)
This uses scary hash rewriting.

Fixes #21.
2012-09-11 18:39:22 -04:00
Eelco Dolstra 9dbda2b3fe Remove debug line 2012-09-11 17:05:35 -04:00
Eelco Dolstra a2785b7391 Support building a derivation if some outputs are already valid
This handles the chroot and build hook cases, which are easy.
Supporting the non-chroot-build case will require more work (hash
rewriting!).

Issue #21.
2012-09-11 16:59:59 -04:00
Eelco Dolstra cfd968dd94 Fix stupid type error in calling std::max 2012-08-27 14:17:13 -04:00
Eelco Dolstra e94806d030 Merge branch 'master' into no-manifests 2012-08-27 11:09:07 -04:00
Eelco Dolstra d950cfe70b Check if MS_PRIVATE is defined
http://hydra.nixos.org/build/2955671
2012-08-20 15:55:49 -04:00
Eelco Dolstra 56e30e161c In the chroot, make all mounted filesystems private
This is required on systemd, which mounts filesystems as "shared"
subtrees.  Changes to shared trees in a private mount namespace are
propagated to the outside world, which is bad.
2012-08-20 15:27:30 -04:00
Eelco Dolstra f0eab0636b Don't bind-mount /proc since we mount our own 2012-08-20 15:27:00 -04:00
Eelco Dolstra 862c4c5ec5 Fix 1755 permission on temporary directories left behind by ‘-K’ 2012-08-19 16:32:42 -04:00
Eelco Dolstra 01d56c1eec Drop the block count in the garbage collector 2012-08-01 22:34:46 -04:00
Eelco Dolstra 97421eb5ec Refactor settings processing
Put all Nix configuration flags in a Settings object.
2012-07-30 19:55:41 -04:00
Eelco Dolstra d059bf48e4 Pass configuration settings to the substituters
Previously substituters could read nix.conf themselves, but this
didn't take --option flags into account.
2012-07-30 16:09:54 -04:00
Eelco Dolstra 73acb8b836 Let build.cc verify the expected hash of a substituter's output
Since SubstitutionGoal::finished() in build.cc computes the hash
anyway, we can prevent the inefficiency of computing the hash twice by
letting the substituter tell Nix about the expected hash, which can
then verify it.
2012-07-27 12:16:02 -04:00
Eelco Dolstra fbf59d95f6 Remove more tabs 2012-07-27 10:56:33 -04:00
Eelco Dolstra b4ea83249b Remove trailing whitespace / tabs 2012-07-27 09:59:18 -04:00
Eelco Dolstra 8c79100839 Merge branch 'master' into no-manifests 2012-07-26 15:14:33 -04:00
Eelco Dolstra 3a4623afbb Set permissions on temporary build directories to 0700
Fixes #39.
2012-07-26 15:04:40 -04:00
Eelco Dolstra 6193105710 Automatically optimise the Nix store when a new path is added
Auto-optimisation is enabled by default.  It can be turned off by
setting auto-optimise-store to false in nix.conf.
2012-07-23 17:14:15 -04:00
Eelco Dolstra fe241ece29 Merge branch 'master' into no-manifests 2012-07-18 10:47:59 -04:00
Eelco Dolstra 3a9fdf2747 Return an exit code of 100 for cached failed builds
Exit code 100 should be returned for all permanent failures.  This
includes cached failures.

Fixes #34.
2012-07-17 15:55:30 -04:00
Eelco Dolstra 6c01fb4d68 Update Nix 1.1 release notes 2012-07-17 10:06:20 -04:00
Eelco Dolstra 53b24f3518 Allow disabling log compression 2012-07-17 09:40:12 -04:00
Eelco Dolstra 425cc612ad build.cc: Don't use hasSubstitute()
Instead make a single call to querySubstitutablePathInfo() per
derivation output.  This is faster and prevents having to implement
the "have" function in the binary cache substituter.
2012-07-08 18:39:24 -04:00
Eelco Dolstra 11800e6198 download-from-binary-cache: parallelise fetching of NAR info files
Getting substitute information using the binary cache substituter has
non-trivial latency overhead.  A package or NixOS system configuration
can have hundreds of dependencies, and in the worst case (when the
local info cache is empty) we have to do a separate HTTP request for
each of these.  If the ping time to the server is t, getting N info
files will take tN seconds; e.g., with a ping time of 0.1s to
nixos.org, sequentially downloading 1000 info files (a typical NixOS
config) will take at least 100 seconds.

To fix this problem, the binary cache substituter can now perform
requests in parallel.  This required changing the substituter
interface to support a function querySubstitutablePathInfos() that
queries multiple paths at the same time, and rewriting queryMissing()
to take advantage of parallelism.  (Due to local caching,
parallelising queryMissing() is sufficient for most use cases, since
it's almost always called before building a derivation and thus fills
the local info cache.)

For example, parallelism speeds up querying all 1056 paths in a
particular NixOS system configuration from 116s to 2.6s.  It works so
well because the eccentricity of the top-level derivation in the
dependency graph is only 9.  So we only need 10 round-trips (when
using an unlimited number of parallel connections) to get everything.

Currently we do a maximum of 150 parallel connections to the server.
Thus it's important that the binary cache server (e.g. nixos.org) has
a high connection limit.  Alternatively we could use HTTP pipelining,
but WWW::Curl doesn't support it and libcurl has a hard-coded limit of
5 requests per pipeline.
2012-07-06 19:08:20 -04:00
Eelco Dolstra 1aba0bf0fa nix-store -r: do substitutions in parallel
I.e. when multiple non-derivation arguments are passed to ‘nix-store
-r’ to be substituted, do them in parallel.
2012-06-27 16:58:15 -04:00
Eelco Dolstra 42f5a2fc29 Mount an empty /dev/shm tmpfs in the chroot
This ensures that whatever the builder writes in /dev/shm is
automatically cleaned up.
2012-06-27 09:52:27 -04:00
Eelco Dolstra 3ee208516f Check the return code of the clone() call 2012-06-27 09:52:06 -04:00
Eelco Dolstra 1db38ae81b When using chroots, use a private PID namespace
In a private PID namespace, processes have PIDs that are separate from
the rest of the system.  The initial child gets PID 1.  Processes in
the chroot cannot see processes outside of the chroot.  This improves
isolation between builds.  However, processes on the outside can see
processes in the chroot and send signals to them (if they have
appropriate rights).

Since the builder gets PID 1, it serves as the reaper for zombies in
the chroot.  This might turn out to be a problem.  In that case we'll
need to have a small PID 1 process that sits in a loop calling wait().
2012-06-25 15:45:16 -04:00
Eelco Dolstra 5489086456 Use a private UTS namespace to provide a deterministic host/domain name to builders
In chroot builds, set the host name to "localhost" and the domain name
to "(none)" (the latter being the kernel's default).  This improves
determinism a bit further.

P.S. I have to idea what UTS stands for.
2012-06-25 14:12:17 -04:00
Eelco Dolstra 723a68c826 Improve error message 2012-06-23 00:57:14 -04:00
Eelco Dolstra 7ffa523fd1 In chroot builds, use a private SysV IPC namespace
This improves isolation a bit further, and it's just one extra flag in
the unshare() call.

P.S. It would be very cool to use CLONE_NEWPID (to put the builder in
a private PID namespace) as well, but that's slightly more risky since
having a builder start as PID 1 may cause problems.
2012-06-23 00:51:40 -04:00
Eelco Dolstra df716c98d2 In chroot builds, use a private network namespace
On Linux it's possible to run a process in its own network namespace,
meaning that it gets its own set of network interfaces, disjunct from
the rest of the system.  We use this to completely remove network
access to chroot builds, except that they get a private loopback
interface.  This means that:

- Builders cannot connect to the outside network or to other processes
  on the same machine, except processes within the same build.

- Vice versa, other processes cannot connect to processes in a chroot
  build, and open ports/connections do not show up in "netstat".

- If two concurrent builders try to listen on the same port (e.g. as
  part of a test), they no longer conflict with each other.

This was inspired by the "PrivateNetwork" flag in systemd.
2012-06-23 00:28:35 -04:00
Eelco Dolstra f5398d374b Compress build logs on the fly using bzip2 2012-05-30 10:12:29 -04:00
Eelco Dolstra 2c26985835 Add option ‘build-keep-log’ to enable/disable writing of build logs
Fixes #26.
2012-05-29 16:42:05 -04:00
Eelco Dolstra db5b86ef13 * Add an option ‘build-use-substitutes’, which can be set to ‘false’
to disable use of substitutes; i.e., force building from source.
  Fixes Nix/221.
2012-04-30 19:15:34 -04:00
Eelco Dolstra 46cdc6ad51 Handle EPERM when creating a hard link for the chroot
There is a race condition when doing parallel builds with chroots and
the immutable bit enabled.  One process may call makeImmutable()
before the other has called link(), in which case link() will fail
with EPERM.  We could retry or wrap the operation in a lock, but since
this condition is rare and I'm lazy, we just use the existing copy
fallback.

Fixes #9.
2012-04-30 10:58:04 -04:00
Eelco Dolstra 31e34fcf93 Close almost all file descriptors in the builder
This regression was accidentally introduced in
35355fc1fc.
2012-04-15 00:20:32 +02:00
Eelco Dolstra f2467eb6a0 On Linux, pretend we're building on Linux 2.6
Setting the UNAME26 personality causes "uname" to return "2.6.x",
regardless of the kernel version.  This improves determinism in
a few misbehaved packages.
2012-04-05 13:03:19 +02:00
Eelco Dolstra 35355fc1fc Set the close-on-exec flag on file descriptors 2012-03-05 20:29:00 +01:00
Eelco Dolstra 7b22bec252 Don't leak a file descriptor in commonChildInit() 2012-03-05 20:28:09 +01:00
Eelco Dolstra 1c94524458 Fix an uninitialised variable
The variable ‘useChroot’ was not initialised properly.  This caused
random failures if using the build hook.  Seen on Mac OS X 10.7 with Clang.
Thanks to KolibriFX for finding this :-)
2012-03-01 16:06:49 +01:00
Eelco Dolstra 6fe13e6aba Fix chroots builds
Chroots are initialised by hard-linking inputs from the Nix store to
the chroot.  This doesn't work if the input has its immutable bit set,
because it's forbidden to create hard links to immutable files.  So
temporarily clear the immutable bit when creating and destroying the
chroot.

Note that making regular files in the Nix store immutable isn't very
reliable, since the bit can easily become cleared: for instance, if we
run the garbage collector after running ‘nix-store --optimise’.  So
maybe we should only make directories immutable.
2012-02-18 01:23:52 +01:00
Eelco Dolstra d5a5a83ad4 Use data() instead of c_str() where appropriate 2012-02-09 18:27:45 +01:00
Eelco Dolstra b1004f40f7 * Reject a build if there is a cycle among the outputs. This is
necessary because existing code assumes that the references graph is
  acyclic.
2011-12-30 14:47:14 +00:00
Eelco Dolstra 8c42a8c8ff * Make sure that lock files are cleaned up properly when building
through the build hook.
2011-12-25 16:38:37 +00:00
Eelco Dolstra b1eb8f4249 * Get rid of some superfluous error messages if a substituter fails.
* Say "fetch" instead of "substitute".
2011-11-29 13:00:41 +00:00
Rob Vermaas 4e1ea17052 nix: add /etc/hosts with localhost entry to chroot builds. 2011-11-21 15:19:51 +00:00
Eelco Dolstra 93227ff65c * Eliminate all uses of the global variable ‘store’ from libstore.
This should also fix:

    nix-instantiate: ./../boost/shared_ptr.hpp:254: T* boost::shared_ptr<T>::operator->() const [with T = nix::StoreAPI]: Assertion `px != 0' failed.

  which was caused by hashDerivationModulo() calling the ‘store’
  object (during store upgrades) before openStore() assigned it.
2011-08-31 21:11:50 +00:00
Eelco Dolstra b2027f70d9 * Fix a huuuuge security hole in the Nix daemon. It didn't check that
derivations added to the store by clients have "correct" output
  paths (meaning that the output paths are computed by hashing the
  derivation according to a certain algorithm).  This means that a
  malicious user could craft a special .drv file to build *any*
  desired path in the store with any desired contents (so long as the
  path doesn't already exist).  Then the attacker just needs to wait
  for a victim to come along and install the compromised path.

  For instance, if Alice (the attacker) knows that the latest Firefox
  derivation in Nixpkgs produces the path

    /nix/store/1a5nyfd4ajxbyy97r1fslhgrv70gj8a7-firefox-5.0.1

  then (provided this path doesn't already exist) she can craft a .drv
  file that creates that path (i.e., has it as one of its outputs),
  add it to the store using "nix-store --add", and build it with
  "nix-store -r".  So the fake .drv could write a Trojan to the
  Firefox path.  Then, if user Bob (the victim) comes along and does

    $ nix-env -i firefox
    $ firefox

  he executes the Trojan injected by Alice.

  The fix is to have the Nix daemon verify that derivation outputs are
  correct (in addValidPath()).  This required some refactoring to move
  the hash computation code to libstore.
2011-07-20 18:10:47 +00:00
Ludovic Courtès 5c9e9f732d Add support for the build-timeout' and --timeout' options. 2011-06-30 15:19:13 +00:00
Eelco Dolstra d787285af9 * nix-instantiate: return exit status 100 to denote a permanent build
failure.  The build hook can use this to distinguish between
  transient and permanent failures on the remote side.
2010-12-13 16:53:23 +00:00
Eelco Dolstra d7ca6f44eb * Update some comments. 2010-12-13 13:19:46 +00:00
Eelco Dolstra a3883cbd28 * Store the size of a store path in the database (to be precise, the
size of the NAR serialisation of the path, i.e., `nix-store --dump
  PATH').  This is useful for Hydra.
2010-11-16 17:11:46 +00:00
Eelco Dolstra bf0dde9597 * Always print hook output on stderr, even if --no-build-output is
set.
* In the build hook, print a trace message to allow Hydra to pick up
  the name of the remote machine used for the build.
2010-08-31 12:36:24 +00:00
Eelco Dolstra 80e722278c * When using the build hook, distinguish between the stderr of the
hook script proper, and the stdout/stderr of the builder.  Only the
  latter should be saved in /nix/var/log/nix/drvs.
* Allow the verbosity to be set through an option.
* Added a flag --quiet to lower the verbosity level.
2010-08-30 14:53:03 +00:00
Eelco Dolstra 766f708418 * Experimental feature: allow a derivation to tell the build hook that
it requires a certain feature on the build machine, e.g.

    requiredSystemFeatures = [ "kvm" ];

  We need this in Hydra to make sure that builds that require KVM
  support are forwarded to machines that have KVM support.  Probably
  this should also be enforced for local builds.
2010-08-27 13:18:13 +00:00
Eelco Dolstra e437b08250 * Made the build hook mechanism more efficient. Rather than starting
the hook every time we want to ask whether we can run a remote build
  (which can be very often), we now reuse a hook process for answering
  those queries until it accepts a build.  So if there are N
  derivations to be built, at most N hooks will be started.
2010-08-25 20:44:28 +00:00
Eelco Dolstra f58f51f380 * Handle the unlikely case where a derivation has no dependencies at
all.
2010-08-24 11:45:44 +00:00
Eelco Dolstra 587dc8aa00 * Sync with the trunk. 2010-08-04 17:48:29 +00:00
Eelco Dolstra 7f893b7a43 * Allow derivations to hint that they should not be built remotely
using the build hook mechanism, by setting the derivation attribute
  "preferLocalBuild" to true.  This has a few use cases:

  - The user environment builder.  Since it just creates a bunch of
    symlinks without much computation, there is no reason to do it
    remotely.  In fact, doing it remotely requires the entire closure
    of the user environment to be copied to the remote machine, which
    is extremely wasteful.

  - `fetchurl'.  Performing the download on a remote machine and then
    copying it to the local machine involves twice as much network
    traffic as performing the download locally, and doesn't save any
    CPU cycles on the local machine.
2010-08-04 12:13:58 +00:00
Peter Simons a17071fef1 Include <cstring> to ensure that strcpy(), strlen(), and memset() are declared.
An "using namespace std" was added locally in those functions that refer to
names from <cstring>. That is not pretty, but it's a very portable solution,
because strcpy() and friends will be found in both the 'std' and in the global
namespace.
2010-06-24 17:51:04 +00:00
Peter Simons 8b7f8b56f1 Added support for passing an (impure) NIX_BUILD_CORES variable to build expressions.
This patch adds the configuration file variable "build-cores" and the
command line argument "--cores". These settings specify the number of
CPU cores to utilize for parallel building within a job, i.e. by passing
an appropriate "-j" flag to GNU Make. The default value is 1, which
means that parallel building is *disabled*. If the number of build cores
is specified as 0 (synonymously: "guess" or "auto"), then the actual
value is supposed to be auto-detected by builders at run-time, i.e by
calling the nproc(1) utility from coreutils.

The environment variable $NIX_BUILD_CORES is available to builders, but
the contents of that variable does *not* influence the hash that goes
into the $out store path, i.e. the number of build cores to be utilized
can be changed at will without requiring any re-builds.
2010-06-23 14:34:08 +00:00
Eelco Dolstra bf87cc44b4 * Sync with the trunk. 2010-06-21 07:55:38 +00:00
Eelco Dolstra 89865da76d * Turn build errors during evaluation into EvalErrors. 2010-06-01 11:19:32 +00:00
Eelco Dolstra a443c7573b * Hack to allow derivations to disable chroot builds by setting the
attribute "__noChroot = true" (requested by Rob).
2010-06-01 10:01:14 +00:00
Eelco Dolstra e020d80e4e * Sync with the trunk. 2010-03-11 15:45:05 +00:00
Ludovic Courtès 05e15049a5 Show the build user's group in /etc/group in chroots.
* src/libstore/build.cc (nix::DerivationGoal::startBuilder): Create
  /etc/group showing the build user's group.
2010-03-11 14:47:04 +00:00
Eelco Dolstra 070057c1b9 * Sync with the trunk. 2010-03-11 10:52:52 +00:00
Ludovic Courtès c752c9f41a Fix thinko in r20547.
* src/libstore/build.cc (nix::DerivationGoal::startBuilder): Fix the GID
  of the build user in /etc/passwd.
2010-03-11 10:33:04 +00:00
Ludovic Courtès 2e8eaca573 Clear supplementary groups of `nixbld' in /etc/passwd in chroots.
* src/libstore/build.cc (nix::DerivationGoal::startBuilder): Don't
  display any supplementary groups for `nixbld' in /etc/passwd.
2010-03-11 10:21:23 +00:00
Eelco Dolstra 4e17be7981 * Revert r19797, and use a simpler solution: just don't monitor build
hooks for silence.  It's unnecessary because the remote nix-store
  command is already monitoring the real build.
2010-02-03 21:38:41 +00:00
Eelco Dolstra 07ffdc2862 * Added an option "fsync-metadata" to fsync() changes to
/nix/var/nix/db.
* Removed the function writeStringToFile since it does (almost) the
  same thing as writeFile.
2010-01-29 12:22:58 +00:00
Eelco Dolstra ef92a14bfe * Include config.h before the C library headers, because it defines
_FILE_OFFSET_BITS=64.  Without it, functions like stat() fail on
  large file sizes.  This happened with a Nix store on squashfs:

  $ nix-store --dump /tmp/mnt/46wzqnk4cbdwh1dclhrpqnnz1icak6n7-local-net-cmds > /dev/null
  error: getting attributes of path `/tmp/mnt/46wzqnk4cbdwh1dclhrpqnnz1icak6n7-local-net-cmds': Value too large for defined data type

  $ stat /tmp/mnt/46wzqnk4cbdwh1dclhrpqnnz1icak6n7-local-net-cmds
  File: `/tmp/mnt/46wzqnk4cbdwh1dclhrpqnnz1icak6n7-local-net-cmds'
  Size: 0               Blocks: 36028797018963968 IO Block: 1024   regular empty file

  (This is a bug in squashfs or mksquashfs, but it shouldn't cause Nix
  to fail.)
2009-12-17 14:12:44 +00:00
Eelco Dolstra bcd6cdf0d8 * Give a better error message when trying to build something and
readOnlyMode is set.
2009-12-09 17:45:22 +00:00
Eelco Dolstra 8520542071 * When building in a chroot, make a copy of a file if hard-linking
fails.  This is likely to happen after a `nix-store --optimise',
  because some files may have 32000 links (NIX-111).
2009-10-22 08:28:33 +00:00
Eelco Dolstra 193f59e077 * Fix a build failure on Fedora 11. rename() needs <stdio.h>. 2009-09-24 07:21:29 +00:00
Eelco Dolstra 64e89980e8 * Create some state directories automatically as a convenience. 2009-09-23 17:05:51 +00:00
Rob Vermaas 48b58617e9 * include wait.h for WEXITSTATUS 2009-09-23 12:57:15 +00:00
Eelco Dolstra d5eab2fc82 * Use foreach in a lot of places. 2009-04-21 11:52:16 +00:00
Eelco Dolstra dfb863f333 * Don't cache transient build hook problems. 2009-04-15 06:25:02 +00:00
Eelco Dolstra 351bf658f9 * Do a substitution even if --max-jobs == 0. 2009-03-31 21:14:07 +00:00
Eelco Dolstra cff2b2a13a * Doh! 2009-03-31 15:50:03 +00:00
Eelco Dolstra 805144b705 * Make the poll interval configurable. 2009-03-30 11:34:03 +00:00
Eelco Dolstra 7377195297 * With `--max-jobs 0', print a nicer error message than "Assertion
`!awake.empty()' failed."
2009-03-29 18:06:00 +00:00
Eelco Dolstra 737423a89c * Use polling to wait for a remote build slot when using a build hook
(that is, call the build hook with a certain interval until it
  accepts the build).
* build-remote.pl was totally broken: for all system types other than
  the local system type, it would send all builds to the *first*
  machine of the appropriate type.
2009-03-29 18:00:45 +00:00
Eelco Dolstra 6e946c8e72 * Scan for references and compute the SHA-256 hash of the output in
one pass.  This halves the amount of I/O.
2009-03-28 20:51:33 +00:00
Eelco Dolstra 3a2bbe7f8a * Simplify communication with the hook a bit (don't use file
descriptors 3/4, just use stdin/stderr).
2009-03-28 19:29:55 +00:00
Eelco Dolstra f54e800366 * The `fixedOutput' variable didn't get initialised when using a build
hook, causing negative caching to fail randomly.
2009-03-28 16:12:27 +00:00
Eelco Dolstra 92f525ecf4 * Negative caching, i.e. caching of build failures. Disabled by
default.  This is mostly useful for Hydra.
2009-03-25 21:05:42 +00:00
Eelco Dolstra a046858a22 * Doh. 2009-03-24 23:40:24 +00:00
Eelco Dolstra 12c8c64efa 2009-03-24 14:07:37 +00:00
Eelco Dolstra cacff1be88 * No longer block while waiting for a lock on a store path. Instead
poll for it (i.e. if we can't acquire the lock, then let the main
  select() loop wait for at most a few seconds and then try again).
  This improves parallelism: if two nix-store processes are both
  trying to build a path at the same time, the second one shouldn't
  block; it should first see if it can build other goals.  Also, it
  prevents the deadlocks that have been occuring in Hydra lately,
  where a process waits for a lock held by another process that's
  waiting for a lock held by the first.

  The downside is that polling isn't really elegant, but POSIX doesn't
  provide a way to wait for locks in a select() loop.  The only
  solution would be to spawn a thread for each lock to do a blocking
  fcntl() and then signal the main thread, but that would require
  pthreads.
2009-03-23 01:05:54 +00:00
Eelco Dolstra 58969fa2bf * Refactoring. 2009-03-22 23:53:05 +00:00
Eelco Dolstra 2897286487 * Unify exportReferencesGraph and exportBuildReferencesGraph, and make
sure that it works as expected when you pass it a derivation.  That
  is, we have to make sure that all build-time dependencies are built,
  and that they are all in the input closure (otherwise remote builds
  might fail, for example).  This is ensured at instantiation time by
  adding all derivations and their sources to inputDrvs and inputSrcs.
2009-03-18 17:36:42 +00:00
Eelco Dolstra c183ee5c79 * Acquire the locks on the output paths before trying to run the build
hook.  This fixes a problem with log files being partially or
  completely filled with 0's because another nix-store process
  truncates the log file.  It should also be more efficient.
2009-03-18 14:48:42 +00:00
Eelco Dolstra 33ecb42991 * Cleanup. 2009-03-17 11:42:55 +00:00
Eelco Dolstra 824b154ce8 * Release output locks as soon as possible, not when the destructor of
the DerivationGoal runs.  Otherwise, if a goal is a top-level goal,
  then the lock won't be released until nix-store finishes.  With
  --keep-going and lots of top-level goals, it's possible to run out
  of file descriptors (this happened sometimes in the build farm for
  Nixpkgs).  Also, for failed derivation, it won't be possible to
  build it again  until the lock is released.
  
* Idem for locks on build users: these weren't released in a timely
  manner for failed top-level derivation goals.  So if there were more
  than (say) 10 such failed builds, you would get an error about
  having run out of build users.
2009-02-16 09:24:20 +00:00
Eelco Dolstra b682fae9d9 * Build hooks: use nix-store --import. This prevents a redundant
scan for runtime dependencies (i.e. the local machine shouldn't do a
  scan that the remote machine has already done).  Also pipe directly
  into `nix-store --import': don't use a temporary file.
2009-02-02 17:24:10 +00:00
Eelco Dolstra 061141e632 * Make it compile on Debian 4.0 (which doesn't define PER_LINUX32_3GB
in sys/personality.h).
2009-01-27 13:36:59 +00:00
Eelco Dolstra 019176137f * When using a build hook, distinguish between transient failures
(e.g. an SSH connection problem) and permanent failures (i.e. the
  builder failed).  This matters to Hydra (it wants to know whether it
  makes sense to retry a build).
2009-01-13 11:39:09 +00:00
Eelco Dolstra c504d90c11 * Support i686-linux builds directly on x86_64-linux Nix
installations.  This is implemented using the personality() syscall,
  which causes uname to return "i686" in child processes.
2009-01-12 16:30:32 +00:00
Eelco Dolstra 6f6bb1fdea * Delete the chroot if it already exists (e.g. left over from an
interrupted build).
2008-12-15 23:55:11 +00:00
Eelco Dolstra 92cb7c4dfe * Put chroots in the Nix store. This ensures that we can create hard
links to the inputs.
2008-12-12 17:14:57 +00:00
Eelco Dolstra 2b70a8e7c9 * Detect whether unshare() is available. 2008-12-12 13:41:36 +00:00
Eelco Dolstra 6776a52bb3 * Use a PathSet for the chroot directories so that we don't
accidentally bind-mount a directory twice.
2008-12-12 11:49:42 +00:00
Eelco Dolstra d86bd22d24 * Define _GNU_SOURCE. Hopefully this fixes the build on Debian 4.0
(http://hydra.nixos.org/nixlog/384/1).
2008-12-12 10:20:19 +00:00
Eelco Dolstra ac5478eb52 * Don't provide the whole Nix store in the chroot, but only the
closure of the inputs.  This really enforces that there can't be any
  undeclared dependencies on paths in the store.  This is done by
  creating a fake Nix store and creating bind-mounts or hard-links in
  the fake store for all paths in the closure.  After the build, the
  build output is moved from the fake store to the real store.  TODO:
  the chroot has to be on the same filesystem as the Nix store for
  this to work, but this isn't enforced yet.  (I.e. it only works
  currently if /tmp is on the same FS as /nix/store.)
2008-12-11 18:57:10 +00:00
Eelco Dolstra 652817046b * Revert r13150: now that we use private namespaces for the chroot, we
don't have to put the chroot in /nix/var/nix/chroots anymore.
  They're back in /tmp now.
2008-12-11 17:52:34 +00:00
Eelco Dolstra 5a569509b4 * Provide a minimal /etc/passwd in the chroot to keep some builders
happy.
2008-12-11 17:44:02 +00:00
Eelco Dolstra 7c54f1603f * Do chroot builds in a private namespace. This means that all the
bind-mounts we do are only visible to the builder process and its
  children.  So accidentally doing "rm -rf" on the chroot directory
  won't wipe out /nix/store and other bind-mounted directories
  anymore.  Also, the bind-mounts in the private namespace disappear
  automatically when the builder exits.
2008-12-11 17:00:12 +00:00
Eelco Dolstra 9ac3f5df9c * Propagate --max-silent-time to remote machines. 2008-12-04 16:51:16 +00:00
Eelco Dolstra 909fbb9de1 * When using build hooks, for any nix-store -r build operation, it is
necessary that at least one build hook doesn't return "postpone",
  otherwise nix-store will barf ("waiting for a build slot, yet there
  are no running children").  So inform the build hook when this is
  the case, so that it can start a build even when that would exceed
  the maximum load on a machine.
2008-12-04 14:29:41 +00:00
Eelco Dolstra 6fedb7aa0f * Restore SIGPIPE to SIG_DFL when running the builder. This prevents
subtle and often hard-to-reproduce bugs where programs in pipes
  either barf with a "Broken pipe" message or not, depending on the
  exact timing conditions.  This particularly happened in GNU M4 (and
  Bison, which uses M4).
2008-11-14 15:46:45 +00:00
Eelco Dolstra a519bb0635 * Some somewhat ad hoc mechanism to allow the build farm to monitor
build progress.
2008-11-12 11:08:27 +00:00
Eelco Dolstra 4166b11a53 * Add /dev/pts to the default nix.conf. 2008-11-11 14:59:20 +00:00
Eelco Dolstra 709b55ee02 * Put the chroots under /nix/var/nix/chroots to reduce the risk of
disasters involving `rm -rf' on bind mounts.  Will try the
  definitive fix (per-process mounts, apparently possible via the
  CLONE_NEWNS flag in clone()) some other time.
2008-10-29 15:34:48 +00:00
Ludovic Courtès c98ea254dc libstore: Always mount `/dev/pts' individually.
This fixes problems such as Tcl's PTY handling:

  ERROR: The system has no more ptys.  Ask your system administrator to
  create more.
2008-10-16 21:04:32 +00:00
Eelco Dolstra 7718b19389 * Explicitly set PWD to prevent problems with chroot builds. In
particular, dietlibc cannot figure out the cwd because the inode of
  the current directory doesn't appear in .. (because getdents returns
  the inode of the mount point).
2008-08-27 17:20:25 +00:00
Eelco Dolstra 9cc0da8453 * Create a /tmp with 1777 permission in the chroot. Some builders
need a writable /tmp (they don't respect $TMPDIR).
2008-08-27 16:03:03 +00:00
Eelco Dolstra d06be428f6 * Disable chroot builds for fixed-output derivations so that we don't
need /etc in the chroot (in particular, /etc/resolv.conf for
  fetchurl).  Not having /etc/resolv.conf in the chroot is a good
  thing, since we don't want normal derivations to download files.
2008-08-25 15:49:22 +00:00
Eelco Dolstra 5adbb0aabe * build.cc: only use a substituter if it returns info for a path. 2008-08-04 13:15:35 +00:00
Eelco Dolstra 3c92ea399d * Make nix-env --dry-run print the paths to be substituted correctly
again.  (After the previous substituter mechanism refactoring I
  didn't update the code that obtains the references of substitutable
  paths.)  This required some refactoring: the substituter programs
  are now kept running and receive/respond to info requests via
  stdin/stdout.
2008-08-02 12:54:35 +00:00
Eelco Dolstra a72709afd8 * Some refactoring: put the GC options / results in separate structs.
* The garbage collector now also prints the number of blocks freed.
2008-06-18 09:34:17 +00:00
Eelco Dolstra 30c9f909b2 * Print some progress info during the early GC stages. 2008-06-13 17:21:20 +00:00
Eelco Dolstra b0e92f6d47 * Merged the no-bdb branch (-r10900:HEAD
https://svn.nixos.org/repos/nix/nix/branches/no-bdb).
2008-06-09 13:52:45 +00:00
Eelco Dolstra 329025253d * Use /tmp/nix-build-<drvpath>-<counter> instead of
/tmp/nix-<pid>-<counter> for temporary build directories.  This
  increases purity a bit: many packages store the temporary build path
  in their output, causing (generally unimportant) binary differences.
2008-03-27 13:45:17 +00:00
Eelco Dolstra 66c51dc215 * nix-store --dump-db / --load-db to dump/load the Nix DB.
* nix-store --register-validity: option to supply the content hash of
  each path.
* Removed compatibility with Nix <= 0.7 stores.
2008-01-29 18:17:36 +00:00
Michael Raskin 5eb5c23447 Fixed exportBuildReferenceGraph 2008-01-15 04:32:08 +00:00
Michael Raskin 2196cb67c5 Added a way to include derivation with its outputs and dependencies - exportBuildReferenceGraph 2007-12-30 09:30:56 +00:00
Eelco Dolstra c370755583 * Flag `--no-build-hook' to disable distributed builds.
* queryDeriver in daemon mode: don't barf if the other side returns an
  empty string (which means there is no deriver).
2007-11-16 16:15:26 +00:00
Eelco Dolstra 42d80d1170 * On FreeBSD, sys/mount.h needs sys/param.h. 2007-10-29 10:03:07 +00:00
Eelco Dolstra d91cd30563 * Detect whether chroot / bind-mount support is available. 2007-10-27 16:51:55 +00:00
Eelco Dolstra dc6f373842 * Delete the chroot directory automatically.
* Removed some debug messages.
2007-10-27 16:06:38 +00:00
Eelco Dolstra 9397cd30c8 * Support for doing builds in a chroot under Linux. The builder is
executed in a chroot that contains just the Nix store, the temporary
  build directory, and a configurable set of additional directories
  (/dev and /proc by default).  This allows a bit more purity
  enforcement: hidden build-time dependencies on directories such as
  /usr or /nix/var/nix/profiles are no longer possible.  As an added
  benefit, accidental network downloads (cf. NIXPKGS-52) are prevented
  as well (because files such as /etc/resolv.conf are not available in
  the chroot).

  However the usefulness of chroots is diminished by the fact that
  many builders depend on /bin/sh, so you need /bin in the list of
  additional directories.  (And then on non-NixOS you need /lib as
  well...)
2007-10-27 00:46:59 +00:00
Eelco Dolstra cb1c1004cd * When there are multiple substituters, make sure to release the
lock on the output path after trying each.  Otherwise the
  pathIsLockedByMe() test gets confused.
2007-08-28 16:22:08 +00:00
Eelco Dolstra c970b28ba0 * Fix a race condition with parallel builds where multiple
fixed-output derivations or substitutions try to build the same
  store path at the same time.  Locking generally catches this, but
  not between multiple goals in the same process.  This happened
  especially often (actually, only) in the build farm with fetchurl
  downloads of the same file being executed on multiple machines and
  then copied back to the main machine where they would clobber each
  other (NIXBF-13).

  Solution: if a goal notices that the output path is already locked,
  then go to sleep until another goal finishes (hopefully the one
  locking the path) and try again.
2007-08-28 11:36:17 +00:00
Eelco Dolstra 9e975458b4 * Get rid of the substitutes database table (NIX-47). Instead, if we
need any info on substitutable paths, we just call the substituters
  (such as download-using-manifests.pl) directly.  This means that
  it's no longer necessary for nix-pull to register substitutes or for
  nix-channel to clear them, which makes those operations much faster
  (NIX-95).  Also, we don't have to worry about keeping nix-pull
  manifests (in /nix/var/nix/manifests) and the database in sync with
  each other.

  The downside is that there is some overhead in calling an external
  program to get the substitutes info.  For instance, "nix-env -qas"
  takes a bit longer.

  Abolishing the substitutes table also makes the logic in
  local-store.cc simpler, as we don't need to store info for invalid
  paths.  On the downside, you cannot do things like "nix-store -qR"
  on a substitutable but invalid path (but nobody did that anyway).

* Never catch interrupts (the Interrupted exception).
2007-08-12 00:29:28 +00:00
Eelco Dolstra 6d1a1191b0 * Support queryDeriver() in multi-user installations. 2007-06-12 16:53:44 +00:00
Eelco Dolstra cbfac2fdcc * Set a terminate() handler to ensure that we leave the BDB
environment cleanly even when an exception is thrown from a
  destructor.  We still crash, but we don't take all other Nix
  processes with us.
2007-05-01 15:16:17 +00:00
Eelco Dolstra 803cb6e3b9 * Override the setuid helper using NIX_SETUID_HELPER. 2007-03-20 22:04:25 +00:00
Eelco Dolstra 8ab229ddf2 * Terminate build hooks and substitutes with a TERM signal, not a KILL
signal.  This is necessary because those processes may have joined
  the BDB environment, so they have to be given a chance to clean up.
  (NIX-85)
2007-03-19 12:48:45 +00:00
Eelco Dolstra 917e06bf63 * Delete the output paths before invoking the build hook. 2007-03-07 15:53:11 +00:00
Eelco Dolstra 46e0919ced * `nix-store --export --sign': sign the Nix archive using the RSA key
in /nix/etc/nix/signing-key.sec
2007-02-21 14:31:42 +00:00
Eelco Dolstra fac63d6416 * exportReferencesGraph: work on paths within store paths as well. 2007-01-23 16:57:43 +00:00
Eelco Dolstra a3e6415ba8 * New primop builtins.filterSource, which can be used to filter files
from a source directory.  All files for which a predicate function
  returns true are copied to the store.  Typical example is to leave
  out the .svn directory:

    stdenv.mkDerivation {
      ...
      src = builtins.filterSource
        (path: baseNameOf (toString path) != ".svn")
        ./source-dir;
      # as opposed to
      #   src = ./source-dir;
    }

  This is important because the .svn directory influences the hash in
  a rather unpredictable and variable way.
2006-12-12 23:05:01 +00:00
Eelco Dolstra 5f681988f2 * Use deletePathWrapped() in more places. 2006-12-09 00:26:24 +00:00
Eelco Dolstra fa33303146 * Goal cancellation inside the waitForInput() loop needs to be handled
very carefully, since it can invalidate iterators into the
  `children' map.
2006-12-08 18:41:48 +00:00
Eelco Dolstra 06c4929958 * Some refactoring.
* Throw more exceptions as BuildErrors instead of Errors.  This
  matters when --keep-going is turned on.  (A BuildError is caught
  and terminates the goal in question, an Error terminates the
  program.)
2006-12-08 17:26:21 +00:00
Eelco Dolstra 9dbfe242e3 * Kill a build if it has gone for more than a certain number of
seconds without producing output on stdout or stderr (NIX-65).  This
  timeout can be specified using the `--max-silent-time' option or the
  `build-max-silent-time' configuration setting.  The default is
  infinity (0).

* Fix a tricky race condition: if we kill the build user before the
  child has done its setuid() to the build user uid, then it won't be
  killed, and we'll potentially lock up in pid.wait().  So also send a
  conventional kill to the child.
2006-12-08 15:44:00 +00:00
Eelco Dolstra d3fe6ab024 * Also for convenience, change the ownership of the build output even
in case of failure.
2006-12-08 00:19:50 +00:00
Eelco Dolstra 096194ab29 * Remove ancient terminology. 2006-12-07 23:58:36 +00:00
Eelco Dolstra 6833e8bbe8 * When keeping the temporary build directory (-K), change the owner
back to the Nix account.
2006-12-07 23:27:40 +00:00
Eelco Dolstra 2819eb36a4 * Be less verbose. 2006-12-07 21:43:35 +00:00
Eelco Dolstra c3286ec020 * Don't count on the Pid deconstructor to kill the child process,
since if we're running a build user in non-root mode, we can't.  Let
  the setuid helper do it.
2006-12-07 17:52:58 +00:00
Eelco Dolstra f76fdb6d42 * If not running as root, let the setuid helper kill the build user's
processes before and after the build.
2006-12-07 16:33:31 +00:00
Eelco Dolstra ec23ecc64d * In the garbage collector, if deleting a path fails, try to fix its
ownership, then try again.
2006-12-07 15:54:52 +00:00
Eelco Dolstra a0a43c3206 * When not running as root, call the setuid helper to change the
ownership of the build result after the build.
2006-12-07 15:18:14 +00:00
Eelco Dolstra 6a07ff1ec0 * Change the ownership of store paths to the Nix account before
deleting them using the setuid helper.
2006-12-07 14:14:35 +00:00
Eelco Dolstra 7d8cf316ee * Pass the actual build user to the setuid helper. 2006-12-07 11:27:32 +00:00
Eelco Dolstra a45c498e4e * If Nix is not running as root, call the setuid helper to start the
builder under the desired build user.
2006-12-07 00:42:30 +00:00
Eelco Dolstra 813a7c65c9 * Sanity check. 2006-12-07 00:19:27 +00:00
Eelco Dolstra 6a8e60913a * Move killUser() to libutil so that the setuid helper can use it. 2006-12-07 00:16:07 +00:00
Eelco Dolstra 6e5ec1029a * Get rid of `build-users'. We'll just take all the members of
`build-users-group'.  This makes configuration easier: you can just
  add users in /etc/group.
2006-12-06 20:00:15 +00:00
Eelco Dolstra 9f0efa6611 * Start of the setuid helper (the program that performs the operations
that have to be done as root: running builders under different uids,
  changing ownership of build results, and deleting paths in the store
  with the wrong ownership).
2006-12-06 01:24:02 +00:00
Eelco Dolstra 2b558843a2 * Be less chatty. 2006-12-05 19:01:19 +00:00
Eelco Dolstra 44cad9630f * Urgh. Do setgid() before setuid(), because the semantics of setgid()
changes completely depending on whether you're root...
2006-12-05 18:28:15 +00:00
Eelco Dolstra 4c1c37d0b6 * FreeBSD returns ESRCH when there are no processes to kill. 2006-12-05 18:07:46 +00:00
Eelco Dolstra a9c4f66cfb * Allow unprivileged users to run the garbage collector and to do
`nix-store --delete'.  But unprivileged users are not allowed to
  ignore liveness.
* `nix-store --delete --ignore-liveness': ignore the runtime roots as
  well.
2006-12-05 02:18:46 +00:00
Eelco Dolstra 35247c4c9f * Removed `build-allow-root'.
* Added `build-users-group', the group under which builds are to be
  performed.
* Check that /nix/store has 1775 permission and is owner by the
  build-users-group.
2006-12-03 15:32:38 +00:00
Eelco Dolstra 7951c3c546 * Some hackery to propagate the worker's stderr and exceptions to the
client.
2006-12-03 02:08:13 +00:00
Eelco Dolstra e25fad691a * Move addTempRoot() to the store API, and add another function
syncWithGC() to allow clients to register GC roots without needing
  write access to the global roots directory or the GC lock.
2006-12-02 16:41:36 +00:00
Eelco Dolstra 0565b5f2b3 * More remote operations.
* Added new operation hasSubstitutes(), which is more efficient than
  querySubstitutes().size() > 0.
2006-11-30 22:43:55 +00:00
Eelco Dolstra 6ecb840fd1 * Put building in the store API. 2006-11-30 18:02:04 +00:00
Eelco Dolstra e2ef5e07fd * Refactoring. There is now an abstract interface class StoreAPI
containing functions that operate on the Nix store.  One
  implementation is LocalStore, which operates on the Nix store
  directly.  The next step, to enable secure multi-user Nix, is to
  create a different implementation RemoteStore that talks to a
  privileged daemon process that uses LocalStore to perform the actual
  operations.
2006-11-30 17:43:04 +00:00
Eelco Dolstra f459a5bb3a * Remove the undocumented `noscan' feature. It's no longer necessary
now that reference scanning is sufficiently streamy.
2006-11-13 18:19:05 +00:00
Eelco Dolstra e2a70b7ec0 * Magic attribute `exportReferencesGraph' that allows the references
graph to be passed to a builder.  This attribute should be a list of
  pairs [name1 path1 name2 path2 ...].  The references graph of each
  `pathN' will be stored in a text file `nameN' in the temporary build
  directory.  The text files have the format used by `nix-store
  --register-validity'.  However, the deriver fields are left empty.

  `exportReferencesGraph' is useful for builders that want to do
  something with the closure of a store path.  Examples: the builders
  that make initrds and ISO images for NixOS.

  `exportReferencesGraph' is entirely pure.  It's necessary because
  otherwise the only way for a builder to get this information would
  be to call `nix-store' directly, which is not allowed (though
  unfortunately possible).
2006-11-13 18:18:13 +00:00
Eelco Dolstra ae6fb27f18 * `nix-store --read-log / -l PATH' shows the build log of PATH, if
available.  For instance,

    $ nix-store -l $(which svn) | less

  lets you read the build log of the Subversion instance in your
  profile.

* `nix-store -qb': if applied to a non-derivation, take the deriver.
2006-10-28 16:33:54 +00:00
Eelco Dolstra 6a67556f71 * Special derivation attribute `allowedReferences' that causes Nix to
check that the references of the output of a derivation are in the
  specified set.  For instance,

    allowedReferences = [];

  specifies that the output cannot have any references.  (This is
  useful, for instance, for the generation of bootstrap binaries for
  stdenv-linux, which must not have any references for purity).  It
  could also be used to guard against undesired runtime dependencies,
  e.g.,

    {gcc, dynlib}: derivation {
      ...
      allowedReferences = [dynlib];
    }

  says that the output can refer to the path of `dynlib' but not
  `gcc'.  A `forbiddedReferences' attribute would be more useful for
  this, though.
2006-10-19 16:09:24 +00:00
Eelco Dolstra 75068e7d75 * Use a proper namespace.
* Optimise header file usage a bit.
* Compile the parser as C++.
2006-09-04 21:06:23 +00:00
Martin Bravenboer 3e5b68068b On cygwin, disable the check that the output is not group or world
writable. File permissions on Cygwin are rather complex, and in this
case this check introduced a problem with build jobs invoke from
outside of Cygwin (MSYS). It seemed almost impossible to fix the
permissions of the directory, so for now this safety check is disabled
on Cygwin.
2006-08-15 21:37:48 +00:00
Eelco Dolstra c15f544356 * Call find-runtime-roots.pl from the garbage collector to prevent
running applications etc. from being garbage collected.
2006-07-20 12:17:25 +00:00
Eelco Dolstra cc51f9c539 * Oops. 2006-06-19 16:35:35 +00:00
Eelco Dolstra 5bb3444032 * _exit() doesn't seem to work right on Cygwin. 2006-06-19 16:24:15 +00:00
Eelco Dolstra c937b73622 * Show when we're blocked waiting for a lock. 2006-06-16 10:13:03 +00:00
Eelco Dolstra 50fe85f016 * For fixed-output derivations, pass the environment variables listed
in the attribute variable `impureEnvVars' from the caller to the
  builder.
2006-05-31 09:51:45 +00:00
Eelco Dolstra 1390ce4142 * Not all platforms have sys/select.h. 2006-05-30 11:37:21 +00:00
Eelco Dolstra d764409d97 * Some Cygwin fixes. 2006-05-24 13:23:20 +00:00
Eelco Dolstra c8bfb11b34 * `nix-env (-i|-u) --dry-run' now shows exactly which missing paths
will be built or substituted.
2006-03-06 11:21:15 +00:00
Eelco Dolstra 74166f2f44 * db.hh shouldn't depend on the Berkeley DB headers. 2006-03-01 17:44:28 +00:00
Eelco Dolstra 81de538e46 * Use setsid instead of setpgrp in child processes. This not only
creates a new process group but also a new session.  New sessions
  have no controlling tty, so child processes like ssh cannot open
  /dev/tty (which is bad).
2006-02-03 14:20:59 +00:00
Eelco Dolstra b90daaaf6c * When killing a build hook, kill the entire process group (as
intended).  This ensures that any ssh child processes to remote
  machines are also killed, and thus the Nix process on the remote
  machine also exits.  Without this, the remote Nix process will
  continue until it exists or until its stdout buffer gets full and it
  locks up.  (Partially fixes NIX-35.)
2006-02-02 16:27:31 +00:00
Eelco Dolstra b7f008fc35 * Did something useful while waiting at IAD: reference scanning is now
much faster.
2005-11-16 08:27:06 +00:00
Eelco Dolstra 92d599c6a7 * Prevent uids from being used for more than one build
simultaneously.  We do this using exclusive locks on uid files in
  /nix/var/nix/userpool, e.g., /nix/var/nix/userpool/123 for uid 123.
2005-10-20 16:58:34 +00:00
Eelco Dolstra e932c40f8e * Oops. Fixed-output derivations were broken. 2005-10-19 14:27:44 +00:00
Eelco Dolstra 13b089c890 * Also kill all processes of the build user after the build. This is
critical to prevent certain kinds of 0wnage.
2005-10-17 17:43:21 +00:00
Eelco Dolstra f1b3a418fa * Before starting a build under some uid, kill all current processes
running under that uid.
2005-10-17 17:35:37 +00:00
Eelco Dolstra 439823ae80 * Check that the build result is owned by the build user, and that
nobody else has write permission to the build result.  This catches
  most hack attempts.
2005-10-17 16:59:25 +00:00
Eelco Dolstra 7ef574e5d0 * Don't use FIFOs to make Nix create the output path on behalf of the
builder.  Instead, require that the Nix store has sticky permission
  (S_ISVTX); everyone can created files in the Nix store, but they
  cannot delete, rename or modify files created by others.
2005-10-17 16:52:29 +00:00
Eelco Dolstra 32282abcea * Beginning of secure multi-user Nix stores. If Nix is started as
root (or setuid root), then builds will be performed under one of
  the users listed in the `build-users' configuration variables.  This
  is to make it impossible to influence build results externally,
  allowing locally built derivations to be shared safely between
  users (see ASE-2005 paper).

  To do: only one builder should be active per build user.
2005-10-17 15:33:24 +00:00
Eelco Dolstra ef9e2c8e73 * Typo. 2005-09-20 16:14:00 +00:00
Eelco Dolstra 456f3251d2 * Typo. 2005-05-10 14:21:46 +00:00
Eelco Dolstra f913283570 * Remove redundant message. 2005-04-13 09:20:27 +00:00
Eelco Dolstra cab7816b56 * Slightly nicer message. 2005-04-11 08:07:41 +00:00
Eelco Dolstra c6178f0b03 * Create missing log and temproots directories automatically (reported
by Rob).
2005-03-24 17:46:38 +00:00
Eelco Dolstra 0df9f08078 * Export the references graph to the build hook. 2005-03-23 13:16:36 +00:00
Eelco Dolstra bfaf83a0fd * When multiple derivations are specified in `nix-store -r', don't
continue building when one fails unless `--keep-going' is
  specified.
* When `--keep-going' is specified, print out the set of failing
  derivations at the end (otherwise it can be hard to find out which
  failed).
2005-02-23 11:19:27 +00:00
Eelco Dolstra 3a2c3f0cf2 * Support for fixed-output hashes over directory trees (i.e., over the
NAR dump of the path).
2005-02-22 21:14:41 +00:00
Eelco Dolstra eda2c3c253 * Compatibility hack so that Nixpkgs can continue to do hash checking
in `fetchurl' in Nix <= 0.7, but doesn't in Nix 0.8.
2005-02-22 15:23:24 +00:00
Eelco Dolstra 3c1630131e * Subtle bug in the builder: if a subgoal that is instantiated
multiple times is also a top-level goal, then the second and later
  instantiations would never be created because there would be a
  stable pointer to the first one that would keep it alive in the
  WeakGoalMap.
* Some tracing code for debugging this kind of problem.
2005-02-18 09:50:20 +00:00
Eelco Dolstra 88273f9574 * Put build logs in $prefix/var/nix/log/drvs/. 2005-02-17 13:54:45 +00:00
Eelco Dolstra 80870d9291 * Input sources should be in the set of all referenceable paths too. 2005-02-11 16:03:47 +00:00
Eelco Dolstra 98df735b51 * Propagate the deriver of a path through the substitute mechanism.
* Removed some dead code (successor stuff) from nix-push.
* Updated terminology in the tests (store expr -> drv path).
* Check that the deriver is set properly in the tests.
2005-02-09 12:57:13 +00:00
Eelco Dolstra 3d74274b37 * Updated `nix-store --verify' to the new schema. 2005-02-08 13:23:55 +00:00
Eelco Dolstra 450c358e20 * Maintain a database table (`derivers') that maps output paths to the
derivation that produced them.
* `nix-store -qd PATH' prints out the derivation that produced a path.
2005-02-07 13:40:40 +00:00
Eelco Dolstra 06b4424286 * Add missing files to dist.
* Fix GC and substitute bugs related to self-references.  Add a
  regression test.
2005-02-01 09:23:38 +00:00
Eelco Dolstra 1328aa3307 * Start of concurrent garbage collection. Processes write temporary
roots to a per-process temporary file in /nix/var/nix/temproots
  while holding a write lock on that file.  The garbage collector
  acquires read locks on all those files, thus blocking further
  progress in other Nix processes, and reads the sets of temporary
  roots.
2005-01-31 10:27:25 +00:00
Eelco Dolstra c505702265 * Fix and simplify the garbage collector (it's still not concurrent,
though).  In particular it's now much easier to register a GC root.
  Just place a symlink to whatever store path it is that you want to
  keep in /nix/var/nix/gcroots.
2005-01-27 15:21:29 +00:00
Eelco Dolstra a24b78e9f1 * Maintain the references/referers relation also for derivations.
This simplifies garbage collection and `nix-store --query
  --requisites' since we no longer need to treat derivations
  specially.

* Better maintaining of the invariants, e.g., setReferences() can only
  be called on a valid/substitutable path.
2005-01-25 21:28:25 +00:00
Eelco Dolstra 2a2756b856 * Simplification: registerSubstitutes -> registerSubstitute. We no
longer need the former since there we no longer have the
  substitutes-rev table (which triggered a O(n^2) cost in updating
  them).
2005-01-25 20:27:40 +00:00
Eelco Dolstra 066da4ab85 * Really fix the substitute mechanism, i.e., ensure the closure
invariant by registering references through the manifest.
* Added a test for nix-pull.
2005-01-25 17:08:52 +00:00
Eelco Dolstra c6290e42bc * Fix the `--fallback' switch.
* Fix the substitutes tests.
2005-01-25 13:00:12 +00:00
Eelco Dolstra 581fc47783 * Fix the build hook mechanism; pass the pointer graph to the hook. 2005-01-25 11:55:43 +00:00
Eelco Dolstra 80faa2f98a * In nix-store: change --build' back to --realise'. Also brought
back the query flag `--force-realise'.
* Fixed some of the tests.
2005-01-25 10:55:33 +00:00
Eelco Dolstra 6a0a2d5593 * Terminology fixes. 2005-01-20 16:01:07 +00:00
Eelco Dolstra 05f0430de1 * Another change to low-level derivations. The last one this year, I
promise :-) This allows derivations to specify on *what* output
  paths of input derivations they are dependent.  This helps to
  prevent unnecessary downloads.  For instance, a build might be
  dependent on the `devel' and `lib' outputs of some library
  component, but not the `docs' output.
2005-01-20 14:10:19 +00:00
Eelco Dolstra 96de272b48 * Renamed normalise.cc' -> build.cc', `storeexprs.cc' ->
`derivations.cc', etc.
* Store the SHA-256 content hash of store paths in the database after
  they have been built/added.  This is so that we can check whether
  the store has been messed with (a la `rpm --verify').
* When registering path validity, verify that the closure property
  holds.
2005-01-19 16:39:47 +00:00
Renamed from src/libstore/normalise.cc (Browse further)