Commit graph

7623 commits

Author SHA1 Message Date
Eelco Dolstra 22a754c091
Fix GC failures on bad store path names
It failed on names like '/nix/store/9ip48nkc9rfy0a4yaw98lp6gipqlib1a-'.
2020-02-28 18:07:10 +01:00
Tobias Möst f6fd01bd19 .dir-locals.el: Set additional lambda indentation to zero 2020-02-20 07:56:35 +01:00
Eelco Dolstra 2e953b567e
Merge pull request #3325 from xzfc/clean-tmpdir
nix-shell: clean up the tmpDir and escape variables
2020-02-19 21:29:18 +01:00
Albert Safin f2a03acf3f nix-shell: clean up the tmpDir and escape variables
The problem fixed: each nix-shell invocation creates a new temporary
directory (`/tmp/nix-shell-*`) and never cleans up.

And while I'm here, shellescape all variables inlined into the rcfile.
See what might happen without escaping:

    $ export TZ="';echo pwned'"
    $ nix-shell -p hello --run hello
    pwned
    Hello, world!
2020-02-19 14:28:49 +00:00
Eelco Dolstra 2ba67da053
Merge pull request #3332 from Calvin-L/patch-1
Document that autoconf is a dependency
2020-02-19 13:02:35 +01:00
Eelco Dolstra 2a14c28669
Merge pull request #3357 from carlosdagos/pure-nix-shell-proxy-env
Pass through http proxy env vars in pure shell
2020-02-19 13:02:02 +01:00
Eelco Dolstra e3e8ee0471
Merge pull request #3328 from Rovanion/nix-daemon-already-running-when-installing-fix
installer: Handle edge case where the nix-daemon is already running on the system
2020-02-19 12:53:25 +01:00
Eelco Dolstra 906afedd23 Use Nixpkgs 20.03 2020-02-19 12:32:45 +01:00
Eelco Dolstra 16e9a75287 Typo 2020-02-19 12:32:33 +01:00
Eelco Dolstra 15ed4137e2
Merge pull request #3359 from bhipple/doc/pure-eval
doc: mention how to turn on pure evaluation mode in manual
2020-02-19 12:30:09 +01:00
Eelco Dolstra c4d3674de6
Merge pull request #3353 from tbsmoest/priv_tobias_pr_set_deathsig-1.4
Fix PR_SET_PDEATHSIG results in Broken pipe (#2395)
2020-02-19 12:29:12 +01:00
Eelco Dolstra 82de90961b Add dev output
Necessary since we're now propagating boehm-gc.
2020-02-19 12:26:59 +01:00
Eelco Dolstra 583d06385d
Build with large config Boehm GC 2020-02-18 17:57:10 +01:00
Eelco Dolstra f46bc0e8eb
Enable debug symbols 2020-02-18 17:52:47 +01:00
Eelco Dolstra 553e584f92
LocalStore::checkDerivationOutputs(): Improve error message 2020-02-18 17:51:48 +01:00
Eelco Dolstra d8fd31f50f
Disable the progress bar if $TERM == dumb or unset
Fixes #3363.
2020-02-18 17:51:18 +01:00
Benjamin Hipple 762febafe2 doc: mention how to turn on pure evaluation mode in manual
The flag is `--pure-eval`, which can be found by looking at the test suite; it
should be in the notes describing the feature as well, since otherwise users may
assume this is referencing something like `nix-shell --pure`.
2020-02-15 01:44:51 -05:00
Tobias Möst 3e347220c8 Fix PR_SET_PDEATHSIG results in Broken pipe (#2395)
The ssh client is lazily started by the first worker thread, that
requires a ssh connection. To avoid the ssh client to be killed, when
the worker process is stopped, do not set PR_SET_PDEATHSIG.
2020-02-14 07:51:44 +01:00
Carlos D d78141a886 Pass through http proxy env vars in pure shell 2020-02-14 16:11:22 +11:00
Eelco Dolstra 9af10b753c Bindings::get(): std::optional<Attr *> -> Attr *
Returning a nullable type in an optional is silly.
2020-02-13 17:15:05 +01:00
Eelco Dolstra d8972317fc Prevent uninitialized StorePath creation 2020-02-13 16:12:16 +01:00
Eelco Dolstra 94c9343702 Merge pull request #3350 from curiousleo/no-macro-use
Remove #[macro_use]
2020-02-10 10:11:35 +01:00
Leonhard Markert 1b56de8cd1 Remove macro_use
As of Rust 2018, macro_use is no longer required in most circumstances.
I think it is generally a good idea to remove these when not needed, to
stop them from polluting the crate's global namespace.
https://doc.rust-lang.org/edition-guide/rust-2018/macros/macro-changes.html#macro_rules-style-macros
2020-02-10 09:03:24 +01:00
Eelco Dolstra d82b78bf51
Fix segfault in gcc on i686-linux
src/libstore/ssh-store.cc: In constructor 'nix::SSHStore::SSHStore(const string&, const Params&)':
  src/libstore/ssh-store.cc:31:21: internal compiler error: Segmentation fault
               compress)
                       ^
  Please submit a full bug report,
  with preprocessed source if appropriate.

https://hydra.nixos.org/build/111545609
2020-02-07 13:01:48 +01:00
Eelco Dolstra db88cb401b
Merge pull request #3344 from LnL7/ssh-ng-remote-params
ssh-store: add remote-store and remote-program query params
2020-02-04 10:10:08 +01:00
Daiderd Jordan 8745c63d3c
ssh-store: add remote-store and remote-program query params
Brings the functionality of ssh-ng:// in sync with the legacy ssh://
implementation.  Specifying the remote store uri enables various useful
things. eg.

    $ nix copy --to ssh-ng://cache?remote-store=file://mnt/cache --all
2020-02-03 23:22:28 +01:00
Eelco Dolstra c5319e5d0b
Show "warning:" in yellow instead of red 2020-02-01 12:37:22 +01:00
Eelco Dolstra 7be1a07a45
Merge pull request #3335 from domenkozar/retry-429
retry on HTTP status code 429
2020-01-29 16:22:46 +01:00
Domen Kožar 48ddb8e481
retry on HTTP status code 429 2020-01-29 11:47:39 +01:00
Calvin Loncaric 46992e71a1
Document that autoconf is a dependency 2020-01-26 17:22:47 -08:00
Eelco Dolstra 2242be83c6
Merge pull request #3329 from mayflower/attrs-chown
structured-attrs: chown .attrs.* files to builder
2020-01-23 18:24:44 +01:00
Robin Gloster f8dbde0813
structured-attrs: chown .attrs.* files to builder
Otherwise `chmod .`'ing the build directory doesn't work anymore, which
is done in nixpkgs if sourceRoot is set to '.'.
2020-01-23 17:38:07 +01:00
Rovanion Luckey a413594baf installer: Handle edge case where the nix-daemon is already running on the system
On a systemd-based Linux distribution: If the user has previously had multi-user Nix installed on the system, removed it and then reinstalled multi-user Nix again the old nix-daemon.service will still be running when `scripts/install-systemd-multi-user.sh` tries to start it which results in nothing being done and the old daemon continuing its run.

When a normal user then tries to use Nix through the daemon the nix binary will fail to connect to the nix-daemon as it does not belong to the currently installed Nix system. See below for steps to reproduce the issue that motivated this change.

$ sh <(curl https://nixos.org/nix/install) --daemon

$ sudo rm -rf /etc/nix /nix /root/.nix-profile /root/.nix-defexpr /root/.nix-channels /home/nix-installer/.nix-profile /home/nix-installer/.nix-defexpr /home/nix-installer/.nix-channels ~/.nix-channels ~/.nix-defexpr/ ~/.nix-profile /etc/profile.d/nix.sh.backup-before-nix /etc/profile.d/nix.sh; sed -i '/added by Nix installer$/d' ~/.bash_profile

$ unset NIX_REMOTE

$ sh <(curl https://nixos.org/nix/install) --daemon

└$ export NIX_REMOTE=daemon

└$ nix-env -iA nixpkgs.hello
installing 'hello-2.10'
error: cannot connect to daemon at '/nix/var/nix/daemon-socket/socket': No such file or directory
(use '--show-trace' to show detailed location information)

└$ sudo systemctl restart nix-daemon.service

└$ nix-env -iA nixpkgs.hello
installing 'hello-2.10'
these paths will be fetched (6.09 MiB download, 27.04 MiB unpacked):
  /nix/store/2g75chlbpxlrqn15zlby2dfh8hr9qwbk-hello-2.10
  /nix/store/aag9d1y4wcddzzrpfmfp9lcmc7skd7jk-glibc-2.27
copying path '/nix/store/aag9d1y4wcddzzrpfmfp9lcmc7skd7jk-glibc-2.27' from 'https://cache.nixos.org'...
copying path '/nix/store/2g75chlbpxlrqn15zlby2dfh8hr9qwbk-hello-2.10' from 'https://cache.nixos.org'...
building '/nix/store/w9adagg6vlikr799nkkqc9la5hbbpgmi-user-environment.drv'...
created 2 symlinks in user environment
2020-01-23 14:48:53 +01:00
Eelco Dolstra d506bd587a Fix clang warning 2020-01-22 21:20:01 +01:00
Eelco Dolstra aef635da78 Fix derivation computation with __structuredAttrs and multiple outputs
Fixes

  error: derivation '/nix/store/klivma7r7h5lndb99f7xxmlh5whyayvg-zlib-1.2.11.drv' has incorrect output '/nix/store/fv98nnx5ykgbq8sqabilkgkbc4169q05-zlib-1.2.11-dev', should be '/nix/store/adm7pilzlj3z5k249s8b4wv3scprhzi1-zlib-1.2.11-dev'
2020-01-21 21:14:13 +01:00
Eelco Dolstra 8b09105db3
Merge pull request #3316 from LnL7/fix-secure-drv-outputs
build: remove warning when in sandboxing test mode
2020-01-14 08:43:37 +01:00
Eelco Dolstra e74b221a25
Merge pull request #3318 from bhipple/doc/relnotes-2.3
doc: touchup release notes for 2.3
2020-01-14 08:43:10 +01:00
Benjamin Hipple 5d24e18e29 doc: touchup release notes for 2.3
- At the top of the release notes, we announce sandboxing is now enabled by default,
then at the bottom it says it's now disabled when missing kernel support. These
can be merged into one point for clarity.

- The point about `max-jobs` defaulting to 1 appears unrelated to sandboxing.
2020-01-14 00:14:03 -05:00
Daiderd Jordan 8b3217f832
build: remove warning when in sandboxing test mode
Introduced in 66fccd5832, but somehow
breaks the secure-drv-outputs test.
2020-01-13 22:09:18 +01:00
Eelco Dolstra c3181e21e7 Tweak error message 2020-01-13 21:52:03 +01:00
Eelco Dolstra bfaa4db7bd Merge branch 'assert-show-expression' of https://github.com/LnL7/nix 2020-01-13 21:49:55 +01:00
John Ericson d64ab5131c unbreak build without pch 2020-01-13 21:45:33 +01:00
Eelco Dolstra c86c71c2b1 Test PRECOMPILE_HEADERS=0 2020-01-13 21:44:35 +01:00
Eelco Dolstra 835e541144 Fix build
https://hydra.nixos.org/eval/1564374
2020-01-13 21:34:54 +01:00
Eelco Dolstra 30c9ca3b05 Fix Nixpkgs dependency 2020-01-13 21:11:56 +01:00
Daiderd Jordan 307bcb9a8e
libexpr: show expression in assertion errors
Includes the expression of the condition in the assertion message if
the assertion failed, making assertions much easier to debug. eg.

    error: assertion (withPython -> (python2Packages != null)) failed at pkgs/tools/security/nmap/default.nix:11:1
2020-01-11 15:45:41 +01:00
Eelco Dolstra 6f046fa39e
Merge pull request #3308 from trusktr/patch-1
Add a link to official channels in the docs.
2020-01-10 01:03:41 +01:00
Eelco Dolstra 72a50756bb
Merge pull request #3307 from yorickvP/yorickvp/nlohmann-fromJSON
builtins.fromJSON: use nlohmann/json parser instead of custom parser
2020-01-10 01:03:07 +01:00
Joe Pea 3895e78794
Add link to official channels in nix-channel command ref 2020-01-09 14:20:08 -08:00
Joe Pea 7ccfa7ca4f
Add a link to official channels in the Channels chapter. 2020-01-09 14:15:19 -08:00