From c5f23f10a84f568874321c04984b1a14d2dce978 Mon Sep 17 00:00:00 2001 From: Eelco Dolstra Date: Wed, 10 May 2017 18:34:18 +0200 Subject: [PATCH] Replace readline by linenoise Using linenoise avoids a license compatibility issue (#1356), is a lot smaller and doesn't pull in ncurses. --- configure.ac | 8 - doc/manual/introduction/about-nix.xml | 6 + nix.spec.in | 2 - release.nix | 22 +- shell.nix | 1 - src/linenoise/LICENSE | 25 + src/linenoise/linenoise.c | 1199 +++++++++++++++++++++++++ src/linenoise/linenoise.h | 73 ++ src/nix/local.mk | 6 +- src/nix/repl.cc | 171 ++-- 10 files changed, 1379 insertions(+), 134 deletions(-) create mode 100644 src/linenoise/LICENSE create mode 100644 src/linenoise/linenoise.c create mode 100644 src/linenoise/linenoise.h diff --git a/configure.ac b/configure.ac index ac37456ae..c7026cf95 100644 --- a/configure.ac +++ b/configure.ac @@ -196,14 +196,6 @@ if test "$gc" = yes; then fi -# Check for readline, needed by "nix repl". -AX_LIB_READLINE -if test "$ax_cv_lib_readline" != "no"; then - have_readline=1 -fi -AC_SUBST(HAVE_READLINE, [$have_readline]) - - AC_ARG_ENABLE(init-state, AC_HELP_STRING([--disable-init-state], [do not initialise DB etc. in `make install']), init_state=$enableval, init_state=yes) diff --git a/doc/manual/introduction/about-nix.xml b/doc/manual/introduction/about-nix.xml index e6dfb7a5a..be065da3e 100644 --- a/doc/manual/introduction/about-nix.xml +++ b/doc/manual/introduction/about-nix.xml @@ -261,6 +261,12 @@ xlink:href="http://nixos.org/">NixOS homepage. xlink:href="http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html">GNU LGPLv2.1 or (at your option) any later version. +Nix uses the linenoise +library, which has the following license: + + + diff --git a/nix.spec.in b/nix.spec.in index 3ba2dfc94..390893d64 100644 --- a/nix.spec.in +++ b/nix.spec.in @@ -20,11 +20,9 @@ Requires: curl Requires: bzip2 Requires: gzip Requires: xz -Requires: readline BuildRequires: bzip2-devel BuildRequires: sqlite-devel BuildRequires: libcurl-devel -BuildRequires: readline-devel # Hack to make that shitty RPM scanning hack shut up. Provides: perl(Nix::SSH) diff --git a/release.nix b/release.nix index fa2fde4f6..54d20c868 100644 --- a/release.nix +++ b/release.nix @@ -73,7 +73,7 @@ let buildInputs = [ curl bzip2 xz brotli - openssl pkgconfig sqlite boehmgc readline + openssl pkgconfig sqlite boehmgc ] ++ lib.optional (stdenv.isLinux || stdenv.isDarwin) libsodium @@ -198,15 +198,15 @@ let rpm_fedora25x86_64 = makeRPM_x86_64 (diskImageFunsFun: diskImageFunsFun.fedora25x86_64) [ "libsodium-devel" ]; - deb_debian8i386 = makeDeb_i686 (diskImageFuns: diskImageFuns.debian8i386) [ "libsodium-dev" ] [ "libsodium13" "libreadline6" ]; - deb_debian8x86_64 = makeDeb_x86_64 (diskImageFunsFun: diskImageFunsFun.debian8x86_64) [ "libsodium-dev" ] [ "libsodium13" "libreadline6" ]; + deb_debian8i386 = makeDeb_i686 (diskImageFuns: diskImageFuns.debian8i386) [ "libsodium-dev" ] [ "libsodium13" ]; + deb_debian8x86_64 = makeDeb_x86_64 (diskImageFunsFun: diskImageFunsFun.debian8x86_64) [ "libsodium-dev" ] [ "libsodium13" ]; - deb_ubuntu1410i386 = makeDeb_i686 (diskImageFuns: diskImageFuns.ubuntu1410i386) [] [ "libreadline6" ]; - deb_ubuntu1410x86_64 = makeDeb_x86_64 (diskImageFuns: diskImageFuns.ubuntu1410x86_64) [] [ "libreadline6" ]; - deb_ubuntu1604i386 = makeDeb_i686 (diskImageFuns: diskImageFuns.ubuntu1604i386) [ "libsodium-dev" ] [ "libsodium18" "libreadline6" ]; - deb_ubuntu1604x86_64 = makeDeb_x86_64 (diskImageFuns: diskImageFuns.ubuntu1604x86_64) [ "libsodium-dev" ] [ "libsodium18" "libreadline6" ]; - deb_ubuntu1610i386 = makeDeb_i686 (diskImageFuns: diskImageFuns.ubuntu1610i386) [ "libsodium-dev" ] [ "libsodium18" "libreadline7" ]; - deb_ubuntu1610x86_64 = makeDeb_x86_64 (diskImageFuns: diskImageFuns.ubuntu1610x86_64) [ "libsodium-dev" ] [ "libsodium18" "libreadline7" ]; + deb_ubuntu1410i386 = makeDeb_i686 (diskImageFuns: diskImageFuns.ubuntu1410i386) [] []; + deb_ubuntu1410x86_64 = makeDeb_x86_64 (diskImageFuns: diskImageFuns.ubuntu1410x86_64) [] []; + deb_ubuntu1604i386 = makeDeb_i686 (diskImageFuns: diskImageFuns.ubuntu1604i386) [ "libsodium-dev" ] [ "libsodium18" ]; + deb_ubuntu1604x86_64 = makeDeb_x86_64 (diskImageFuns: diskImageFuns.ubuntu1604x86_64) [ "libsodium-dev" ] [ "libsodium18" ]; + deb_ubuntu1610i386 = makeDeb_i686 (diskImageFuns: diskImageFuns.ubuntu1610i386) [ "libsodium-dev" ] [ "libsodium18" ]; + deb_ubuntu1610x86_64 = makeDeb_x86_64 (diskImageFuns: diskImageFuns.ubuntu1610x86_64) [ "libsodium-dev" ] [ "libsodium18" ]; # System tests. @@ -299,7 +299,7 @@ let src = jobs.tarball; diskImage = (diskImageFun vmTools.diskImageFuns) { extraPackages = - [ "sqlite" "sqlite-devel" "bzip2-devel" "emacs" "libcurl-devel" "openssl-devel" "xz-devel" "readline-devel" ] + [ "sqlite" "sqlite-devel" "bzip2-devel" "emacs" "libcurl-devel" "openssl-devel" "xz-devel" ] ++ extraPackages; }; memSize = 1024; meta.schedulingPriority = 50; @@ -321,7 +321,7 @@ let src = jobs.tarball; diskImage = (diskImageFun vmTools.diskImageFuns) { extraPackages = - [ "libsqlite3-dev" "libbz2-dev" "libcurl-dev" "libcurl3-nss" "libssl-dev" "liblzma-dev" "libreadline-dev" ] + [ "libsqlite3-dev" "libbz2-dev" "libcurl-dev" "libcurl3-nss" "libssl-dev" "liblzma-dev" ] ++ extraPackages; }; memSize = 1024; meta.schedulingPriority = 50; diff --git a/shell.nix b/shell.nix index bbce68564..8645d3602 100644 --- a/shell.nix +++ b/shell.nix @@ -16,7 +16,6 @@ with import {}; customMemoryManagement = false; }) autoreconfHook - readline # For nix-perl perl diff --git a/src/linenoise/LICENSE b/src/linenoise/LICENSE new file mode 100644 index 000000000..18e814865 --- /dev/null +++ b/src/linenoise/LICENSE @@ -0,0 +1,25 @@ +Copyright (c) 2010-2014, Salvatore Sanfilippo +Copyright (c) 2010-2013, Pieter Noordhuis + +All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + +* Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/src/linenoise/linenoise.c b/src/linenoise/linenoise.c new file mode 100644 index 000000000..fce14a7c5 --- /dev/null +++ b/src/linenoise/linenoise.c @@ -0,0 +1,1199 @@ +/* linenoise.c -- guerrilla line editing library against the idea that a + * line editing lib needs to be 20,000 lines of C code. + * + * You can find the latest source code at: + * + * http://github.com/antirez/linenoise + * + * Does a number of crazy assumptions that happen to be true in 99.9999% of + * the 2010 UNIX computers around. + * + * ------------------------------------------------------------------------ + * + * Copyright (c) 2010-2016, Salvatore Sanfilippo + * Copyright (c) 2010-2013, Pieter Noordhuis + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * ------------------------------------------------------------------------ + * + * References: + * - http://invisible-island.net/xterm/ctlseqs/ctlseqs.html + * - http://www.3waylabs.com/nw/WWW/products/wizcon/vt220.html + * + * Todo list: + * - Filter bogus Ctrl+ combinations. + * - Win32 support + * + * Bloat: + * - History search like Ctrl+r in readline? + * + * List of escape sequences used by this program, we do everything just + * with three sequences. In order to be so cheap we may have some + * flickering effect with some slow terminal, but the lesser sequences + * the more compatible. + * + * EL (Erase Line) + * Sequence: ESC [ n K + * Effect: if n is 0 or missing, clear from cursor to end of line + * Effect: if n is 1, clear from beginning of line to cursor + * Effect: if n is 2, clear entire line + * + * CUF (CUrsor Forward) + * Sequence: ESC [ n C + * Effect: moves cursor forward n chars + * + * CUB (CUrsor Backward) + * Sequence: ESC [ n D + * Effect: moves cursor backward n chars + * + * The following is used to get the terminal width if getting + * the width with the TIOCGWINSZ ioctl fails + * + * DSR (Device Status Report) + * Sequence: ESC [ 6 n + * Effect: reports the current cusor position as ESC [ n ; m R + * where n is the row and m is the column + * + * When multi line mode is enabled, we also use an additional escape + * sequence. However multi line editing is disabled by default. + * + * CUU (Cursor Up) + * Sequence: ESC [ n A + * Effect: moves cursor up of n chars. + * + * CUD (Cursor Down) + * Sequence: ESC [ n B + * Effect: moves cursor down of n chars. + * + * When linenoiseClearScreen() is called, two additional escape sequences + * are used in order to clear the screen and position the cursor at home + * position. + * + * CUP (Cursor position) + * Sequence: ESC [ H + * Effect: moves the cursor to upper left corner + * + * ED (Erase display) + * Sequence: ESC [ 2 J + * Effect: clear the whole screen + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "linenoise.h" + +#define LINENOISE_DEFAULT_HISTORY_MAX_LEN 100 +#define LINENOISE_MAX_LINE 4096 +static char *unsupported_term[] = {"dumb","cons25","emacs",NULL}; +static linenoiseCompletionCallback *completionCallback = NULL; +static linenoiseHintsCallback *hintsCallback = NULL; +static linenoiseFreeHintsCallback *freeHintsCallback = NULL; + +static struct termios orig_termios; /* In order to restore at exit.*/ +static int rawmode = 0; /* For atexit() function to check if restore is needed*/ +static int mlmode = 0; /* Multi line mode. Default is single line. */ +static int atexit_registered = 0; /* Register atexit just 1 time. */ +static int history_max_len = LINENOISE_DEFAULT_HISTORY_MAX_LEN; +static int history_len = 0; +static char **history = NULL; + +/* The linenoiseState structure represents the state during line editing. + * We pass this state to functions implementing specific editing + * functionalities. */ +struct linenoiseState { + int ifd; /* Terminal stdin file descriptor. */ + int ofd; /* Terminal stdout file descriptor. */ + char *buf; /* Edited line buffer. */ + size_t buflen; /* Edited line buffer size. */ + const char *prompt; /* Prompt to display. */ + size_t plen; /* Prompt length. */ + size_t pos; /* Current cursor position. */ + size_t oldpos; /* Previous refresh cursor position. */ + size_t len; /* Current edited line length. */ + size_t cols; /* Number of columns in terminal. */ + size_t maxrows; /* Maximum num of rows used so far (multiline mode) */ + int history_index; /* The history index we are currently editing. */ +}; + +enum KEY_ACTION{ + KEY_NULL = 0, /* NULL */ + CTRL_A = 1, /* Ctrl+a */ + CTRL_B = 2, /* Ctrl-b */ + CTRL_C = 3, /* Ctrl-c */ + CTRL_D = 4, /* Ctrl-d */ + CTRL_E = 5, /* Ctrl-e */ + CTRL_F = 6, /* Ctrl-f */ + CTRL_H = 8, /* Ctrl-h */ + TAB = 9, /* Tab */ + CTRL_K = 11, /* Ctrl+k */ + CTRL_L = 12, /* Ctrl+l */ + ENTER = 13, /* Enter */ + CTRL_N = 14, /* Ctrl-n */ + CTRL_P = 16, /* Ctrl-p */ + CTRL_T = 20, /* Ctrl-t */ + CTRL_U = 21, /* Ctrl+u */ + CTRL_W = 23, /* Ctrl+w */ + ESC = 27, /* Escape */ + BACKSPACE = 127 /* Backspace */ +}; + +static void linenoiseAtExit(void); +int linenoiseHistoryAdd(const char *line); +static void refreshLine(struct linenoiseState *l); + +/* Debugging macro. */ +#if 0 +FILE *lndebug_fp = NULL; +#define lndebug(...) \ + do { \ + if (lndebug_fp == NULL) { \ + lndebug_fp = fopen("/tmp/lndebug.txt","a"); \ + fprintf(lndebug_fp, \ + "[%d %d %d] p: %d, rows: %d, rpos: %d, max: %d, oldmax: %d\n", \ + (int)l->len,(int)l->pos,(int)l->oldpos,plen,rows,rpos, \ + (int)l->maxrows,old_rows); \ + } \ + fprintf(lndebug_fp, ", " __VA_ARGS__); \ + fflush(lndebug_fp); \ + } while (0) +#else +#define lndebug(fmt, ...) +#endif + +/* ======================= Low level terminal handling ====================== */ + +/* Set if to use or not the multi line mode. */ +void linenoiseSetMultiLine(int ml) { + mlmode = ml; +} + +/* Return true if the terminal name is in the list of terminals we know are + * not able to understand basic escape sequences. */ +static int isUnsupportedTerm(void) { + char *term = getenv("TERM"); + int j; + + if (term == NULL) return 0; + for (j = 0; unsupported_term[j]; j++) + if (!strcasecmp(term,unsupported_term[j])) return 1; + return 0; +} + +/* Raw mode: 1960 magic shit. */ +static int enableRawMode(int fd) { + struct termios raw; + + if (!isatty(STDIN_FILENO)) goto fatal; + if (!atexit_registered) { + atexit(linenoiseAtExit); + atexit_registered = 1; + } + if (tcgetattr(fd,&orig_termios) == -1) goto fatal; + + raw = orig_termios; /* modify the original mode */ + /* input modes: no break, no CR to NL, no parity check, no strip char, + * no start/stop output control. */ + raw.c_iflag &= ~(BRKINT | ICRNL | INPCK | ISTRIP | IXON); + /* output modes - disable post processing */ + raw.c_oflag &= ~(OPOST); + /* control modes - set 8 bit chars */ + raw.c_cflag |= (CS8); + /* local modes - choing off, canonical off, no extended functions, + * no signal chars (^Z,^C) */ + raw.c_lflag &= ~(ECHO | ICANON | IEXTEN | ISIG); + /* control chars - set return condition: min number of bytes and timer. + * We want read to return every single byte, without timeout. */ + raw.c_cc[VMIN] = 1; raw.c_cc[VTIME] = 0; /* 1 byte, no timer */ + + /* put terminal in raw mode after flushing */ + if (tcsetattr(fd,TCSAFLUSH,&raw) < 0) goto fatal; + rawmode = 1; + return 0; + +fatal: + errno = ENOTTY; + return -1; +} + +static void disableRawMode(int fd) { + /* Don't even check the return value as it's too late. */ + if (rawmode && tcsetattr(fd,TCSAFLUSH,&orig_termios) != -1) + rawmode = 0; +} + +/* Use the ESC [6n escape sequence to query the horizontal cursor position + * and return it. On error -1 is returned, on success the position of the + * cursor. */ +static int getCursorPosition(int ifd, int ofd) { + char buf[32]; + int cols, rows; + unsigned int i = 0; + + /* Report cursor location */ + if (write(ofd, "\x1b[6n", 4) != 4) return -1; + + /* Read the response: ESC [ rows ; cols R */ + while (i < sizeof(buf)-1) { + if (read(ifd,buf+i,1) != 1) break; + if (buf[i] == 'R') break; + i++; + } + buf[i] = '\0'; + + /* Parse it. */ + if (buf[0] != ESC || buf[1] != '[') return -1; + if (sscanf(buf+2,"%d;%d",&rows,&cols) != 2) return -1; + return cols; +} + +/* Try to get the number of columns in the current terminal, or assume 80 + * if it fails. */ +static int getColumns(int ifd, int ofd) { + struct winsize ws; + + if (ioctl(1, TIOCGWINSZ, &ws) == -1 || ws.ws_col == 0) { + /* ioctl() failed. Try to query the terminal itself. */ + int start, cols; + + /* Get the initial position so we can restore it later. */ + start = getCursorPosition(ifd,ofd); + if (start == -1) goto failed; + + /* Go to right margin and get position. */ + if (write(ofd,"\x1b[999C",6) != 6) goto failed; + cols = getCursorPosition(ifd,ofd); + if (cols == -1) goto failed; + + /* Restore position. */ + if (cols > start) { + char seq[32]; + snprintf(seq,32,"\x1b[%dD",cols-start); + if (write(ofd,seq,strlen(seq)) == -1) { + /* Can't recover... */ + } + } + return cols; + } else { + return ws.ws_col; + } + +failed: + return 80; +} + +/* Clear the screen. Used to handle ctrl+l */ +void linenoiseClearScreen(void) { + if (write(STDOUT_FILENO,"\x1b[H\x1b[2J",7) <= 0) { + /* nothing to do, just to avoid warning. */ + } +} + +/* Beep, used for completion when there is nothing to complete or when all + * the choices were already shown. */ +static void linenoiseBeep(void) { + fprintf(stderr, "\x7"); + fflush(stderr); +} + +/* ============================== Completion ================================ */ + +/* Free a list of completion option populated by linenoiseAddCompletion(). */ +static void freeCompletions(linenoiseCompletions *lc) { + size_t i; + for (i = 0; i < lc->len; i++) + free(lc->cvec[i]); + if (lc->cvec != NULL) + free(lc->cvec); +} + +/* This is an helper function for linenoiseEdit() and is called when the + * user types the key in order to complete the string currently in the + * input. + * + * The state of the editing is encapsulated into the pointed linenoiseState + * structure as described in the structure definition. */ +static int completeLine(struct linenoiseState *ls) { + linenoiseCompletions lc = { 0, NULL }; + int nread, nwritten; + char c = 0; + + completionCallback(ls->buf,&lc); + if (lc.len == 0) { + linenoiseBeep(); + } else { + size_t stop = 0, i = 0; + + while(!stop) { + /* Show completion or original buffer */ + if (i < lc.len) { + struct linenoiseState saved = *ls; + + ls->len = ls->pos = strlen(lc.cvec[i]); + ls->buf = lc.cvec[i]; + refreshLine(ls); + ls->len = saved.len; + ls->pos = saved.pos; + ls->buf = saved.buf; + } else { + refreshLine(ls); + } + + nread = read(ls->ifd,&c,1); + if (nread <= 0) { + freeCompletions(&lc); + return -1; + } + + switch(c) { + case 9: /* tab */ + i = (i+1) % (lc.len+1); + if (i == lc.len) linenoiseBeep(); + break; + case 27: /* escape */ + /* Re-show original buffer */ + if (i < lc.len) refreshLine(ls); + stop = 1; + break; + default: + /* Update buffer and return */ + if (i < lc.len) { + nwritten = snprintf(ls->buf,ls->buflen,"%s",lc.cvec[i]); + ls->len = ls->pos = nwritten; + } + stop = 1; + break; + } + } + } + + freeCompletions(&lc); + return c; /* Return last read character */ +} + +/* Register a callback function to be called for tab-completion. */ +void linenoiseSetCompletionCallback(linenoiseCompletionCallback *fn) { + completionCallback = fn; +} + +/* Register a hits function to be called to show hits to the user at the + * right of the prompt. */ +void linenoiseSetHintsCallback(linenoiseHintsCallback *fn) { + hintsCallback = fn; +} + +/* Register a function to free the hints returned by the hints callback + * registered with linenoiseSetHintsCallback(). */ +void linenoiseSetFreeHintsCallback(linenoiseFreeHintsCallback *fn) { + freeHintsCallback = fn; +} + +/* This function is used by the callback function registered by the user + * in order to add completion options given the input string when the + * user typed . See the example.c source code for a very easy to + * understand example. */ +void linenoiseAddCompletion(linenoiseCompletions *lc, const char *str) { + size_t len = strlen(str); + char *copy, **cvec; + + copy = malloc(len+1); + if (copy == NULL) return; + memcpy(copy,str,len+1); + cvec = realloc(lc->cvec,sizeof(char*)*(lc->len+1)); + if (cvec == NULL) { + free(copy); + return; + } + lc->cvec = cvec; + lc->cvec[lc->len++] = copy; +} + +/* =========================== Line editing ================================= */ + +/* We define a very simple "append buffer" structure, that is an heap + * allocated string where we can append to. This is useful in order to + * write all the escape sequences in a buffer and flush them to the standard + * output in a single call, to avoid flickering effects. */ +struct abuf { + char *b; + int len; +}; + +static void abInit(struct abuf *ab) { + ab->b = NULL; + ab->len = 0; +} + +static void abAppend(struct abuf *ab, const char *s, int len) { + char *new = realloc(ab->b,ab->len+len); + + if (new == NULL) return; + memcpy(new+ab->len,s,len); + ab->b = new; + ab->len += len; +} + +static void abFree(struct abuf *ab) { + free(ab->b); +} + +/* Helper of refreshSingleLine() and refreshMultiLine() to show hints + * to the right of the prompt. */ +void refreshShowHints(struct abuf *ab, struct linenoiseState *l, int plen) { + char seq[64]; + if (hintsCallback && plen+l->len < l->cols) { + int color = -1, bold = 0; + char *hint = hintsCallback(l->buf,&color,&bold); + if (hint) { + int hintlen = strlen(hint); + int hintmaxlen = l->cols-(plen+l->len); + if (hintlen > hintmaxlen) hintlen = hintmaxlen; + if (bold == 1 && color == -1) color = 37; + if (color != -1 || bold != 0) + snprintf(seq,64,"\033[%d;%d;49m",bold,color); + abAppend(ab,seq,strlen(seq)); + abAppend(ab,hint,hintlen); + if (color != -1 || bold != 0) + abAppend(ab,"\033[0m",4); + /* Call the function to free the hint returned. */ + if (freeHintsCallback) freeHintsCallback(hint); + } + } +} + +/* Single line low level line refresh. + * + * Rewrite the currently edited line accordingly to the buffer content, + * cursor position, and number of columns of the terminal. */ +static void refreshSingleLine(struct linenoiseState *l) { + char seq[64]; + size_t plen = strlen(l->prompt); + int fd = l->ofd; + char *buf = l->buf; + size_t len = l->len; + size_t pos = l->pos; + struct abuf ab; + + while((plen+pos) >= l->cols) { + buf++; + len--; + pos--; + } + while (plen+len > l->cols) { + len--; + } + + abInit(&ab); + /* Cursor to left edge */ + snprintf(seq,64,"\r"); + abAppend(&ab,seq,strlen(seq)); + /* Write the prompt and the current buffer content */ + abAppend(&ab,l->prompt,strlen(l->prompt)); + abAppend(&ab,buf,len); + /* Show hits if any. */ + refreshShowHints(&ab,l,plen); + /* Erase to right */ + snprintf(seq,64,"\x1b[0K"); + abAppend(&ab,seq,strlen(seq)); + /* Move cursor to original position. */ + snprintf(seq,64,"\r\x1b[%dC", (int)(pos+plen)); + abAppend(&ab,seq,strlen(seq)); + if (write(fd,ab.b,ab.len) == -1) {} /* Can't recover from write error. */ + abFree(&ab); +} + +/* Multi line low level line refresh. + * + * Rewrite the currently edited line accordingly to the buffer content, + * cursor position, and number of columns of the terminal. */ +static void refreshMultiLine(struct linenoiseState *l) { + char seq[64]; + int plen = strlen(l->prompt); + int rows = (plen+l->len+l->cols-1)/l->cols; /* rows used by current buf. */ + int rpos = (plen+l->oldpos+l->cols)/l->cols; /* cursor relative row. */ + int rpos2; /* rpos after refresh. */ + int col; /* colum position, zero-based. */ + int old_rows = l->maxrows; + int fd = l->ofd, j; + struct abuf ab; + + /* Update maxrows if needed. */ + if (rows > (int)l->maxrows) l->maxrows = rows; + + /* First step: clear all the lines used before. To do so start by + * going to the last row. */ + abInit(&ab); + if (old_rows-rpos > 0) { + lndebug("go down %d", old_rows-rpos); + snprintf(seq,64,"\x1b[%dB", old_rows-rpos); + abAppend(&ab,seq,strlen(seq)); + } + + /* Now for every row clear it, go up. */ + for (j = 0; j < old_rows-1; j++) { + lndebug("clear+up"); + snprintf(seq,64,"\r\x1b[0K\x1b[1A"); + abAppend(&ab,seq,strlen(seq)); + } + + /* Clean the top line. */ + lndebug("clear"); + snprintf(seq,64,"\r\x1b[0K"); + abAppend(&ab,seq,strlen(seq)); + + /* Write the prompt and the current buffer content */ + abAppend(&ab,l->prompt,strlen(l->prompt)); + abAppend(&ab,l->buf,l->len); + + /* Show hits if any. */ + refreshShowHints(&ab,l,plen); + + /* If we are at the very end of the screen with our prompt, we need to + * emit a newline and move the prompt to the first column. */ + if (l->pos && + l->pos == l->len && + (l->pos+plen) % l->cols == 0) + { + lndebug(""); + abAppend(&ab,"\n",1); + snprintf(seq,64,"\r"); + abAppend(&ab,seq,strlen(seq)); + rows++; + if (rows > (int)l->maxrows) l->maxrows = rows; + } + + /* Move cursor to right position. */ + rpos2 = (plen+l->pos+l->cols)/l->cols; /* current cursor relative row. */ + lndebug("rpos2 %d", rpos2); + + /* Go up till we reach the expected positon. */ + if (rows-rpos2 > 0) { + lndebug("go-up %d", rows-rpos2); + snprintf(seq,64,"\x1b[%dA", rows-rpos2); + abAppend(&ab,seq,strlen(seq)); + } + + /* Set column. */ + col = (plen+(int)l->pos) % (int)l->cols; + lndebug("set col %d", 1+col); + if (col) + snprintf(seq,64,"\r\x1b[%dC", col); + else + snprintf(seq,64,"\r"); + abAppend(&ab,seq,strlen(seq)); + + lndebug("\n"); + l->oldpos = l->pos; + + if (write(fd,ab.b,ab.len) == -1) {} /* Can't recover from write error. */ + abFree(&ab); +} + +/* Calls the two low level functions refreshSingleLine() or + * refreshMultiLine() according to the selected mode. */ +static void refreshLine(struct linenoiseState *l) { + if (mlmode) + refreshMultiLine(l); + else + refreshSingleLine(l); +} + +/* Insert the character 'c' at cursor current position. + * + * On error writing to the terminal -1 is returned, otherwise 0. */ +int linenoiseEditInsert(struct linenoiseState *l, char c) { + if (l->len < l->buflen) { + if (l->len == l->pos) { + l->buf[l->pos] = c; + l->pos++; + l->len++; + l->buf[l->len] = '\0'; + if ((!mlmode && l->plen+l->len < l->cols && !hintsCallback)) { + /* Avoid a full update of the line in the + * trivial case. */ + if (write(l->ofd,&c,1) == -1) return -1; + } else { + refreshLine(l); + } + } else { + memmove(l->buf+l->pos+1,l->buf+l->pos,l->len-l->pos); + l->buf[l->pos] = c; + l->len++; + l->pos++; + l->buf[l->len] = '\0'; + refreshLine(l); + } + } + return 0; +} + +/* Move cursor on the left. */ +void linenoiseEditMoveLeft(struct linenoiseState *l) { + if (l->pos > 0) { + l->pos--; + refreshLine(l); + } +} + +/* Move cursor on the right. */ +void linenoiseEditMoveRight(struct linenoiseState *l) { + if (l->pos != l->len) { + l->pos++; + refreshLine(l); + } +} + +/* Move cursor to the start of the line. */ +void linenoiseEditMoveHome(struct linenoiseState *l) { + if (l->pos != 0) { + l->pos = 0; + refreshLine(l); + } +} + +/* Move cursor to the end of the line. */ +void linenoiseEditMoveEnd(struct linenoiseState *l) { + if (l->pos != l->len) { + l->pos = l->len; + refreshLine(l); + } +} + +/* Substitute the currently edited line with the next or previous history + * entry as specified by 'dir'. */ +#define LINENOISE_HISTORY_NEXT 0 +#define LINENOISE_HISTORY_PREV 1 +void linenoiseEditHistoryNext(struct linenoiseState *l, int dir) { + if (history_len > 1) { + /* Update the current history entry before to + * overwrite it with the next one. */ + free(history[history_len - 1 - l->history_index]); + history[history_len - 1 - l->history_index] = strdup(l->buf); + /* Show the new entry */ + l->history_index += (dir == LINENOISE_HISTORY_PREV) ? 1 : -1; + if (l->history_index < 0) { + l->history_index = 0; + return; + } else if (l->history_index >= history_len) { + l->history_index = history_len-1; + return; + } + strncpy(l->buf,history[history_len - 1 - l->history_index],l->buflen); + l->buf[l->buflen-1] = '\0'; + l->len = l->pos = strlen(l->buf); + refreshLine(l); + } +} + +/* Delete the character at the right of the cursor without altering the cursor + * position. Basically this is what happens with the "Delete" keyboard key. */ +void linenoiseEditDelete(struct linenoiseState *l) { + if (l->len > 0 && l->pos < l->len) { + memmove(l->buf+l->pos,l->buf+l->pos+1,l->len-l->pos-1); + l->len--; + l->buf[l->len] = '\0'; + refreshLine(l); + } +} + +/* Backspace implementation. */ +void linenoiseEditBackspace(struct linenoiseState *l) { + if (l->pos > 0 && l->len > 0) { + memmove(l->buf+l->pos-1,l->buf+l->pos,l->len-l->pos); + l->pos--; + l->len--; + l->buf[l->len] = '\0'; + refreshLine(l); + } +} + +/* Delete the previosu word, maintaining the cursor at the start of the + * current word. */ +void linenoiseEditDeletePrevWord(struct linenoiseState *l) { + size_t old_pos = l->pos; + size_t diff; + + while (l->pos > 0 && l->buf[l->pos-1] == ' ') + l->pos--; + while (l->pos > 0 && l->buf[l->pos-1] != ' ') + l->pos--; + diff = old_pos - l->pos; + memmove(l->buf+l->pos,l->buf+old_pos,l->len-old_pos+1); + l->len -= diff; + refreshLine(l); +} + +/* This function is the core of the line editing capability of linenoise. + * It expects 'fd' to be already in "raw mode" so that every key pressed + * will be returned ASAP to read(). + * + * The resulting string is put into 'buf' when the user type enter, or + * when ctrl+d is typed. + * + * The function returns the length of the current buffer. */ +static int linenoiseEdit(int stdin_fd, int stdout_fd, char *buf, size_t buflen, const char *prompt) +{ + struct linenoiseState l; + + /* Populate the linenoise state that we pass to functions implementing + * specific editing functionalities. */ + l.ifd = stdin_fd; + l.ofd = stdout_fd; + l.buf = buf; + l.buflen = buflen; + l.prompt = prompt; + l.plen = strlen(prompt); + l.oldpos = l.pos = 0; + l.len = 0; + l.cols = getColumns(stdin_fd, stdout_fd); + l.maxrows = 0; + l.history_index = 0; + + /* Buffer starts empty. */ + l.buf[0] = '\0'; + l.buflen--; /* Make sure there is always space for the nulterm */ + + /* The latest history entry is always our current buffer, that + * initially is just an empty string. */ + linenoiseHistoryAdd(""); + + if (write(l.ofd,prompt,l.plen) == -1) return -1; + while(1) { + char c; + int nread; + char seq[3]; + + nread = read(l.ifd,&c,1); + if (nread <= 0) return l.len; + + /* Only autocomplete when the callback is set. It returns < 0 when + * there was an error reading from fd. Otherwise it will return the + * character that should be handled next. */ + if (c == 9 && completionCallback != NULL) { + c = completeLine(&l); + /* Return on errors */ + if (c < 0) return l.len; + /* Read next character when 0 */ + if (c == 0) continue; + } + + switch(c) { + case ENTER: /* enter */ + history_len--; + free(history[history_len]); + if (mlmode) linenoiseEditMoveEnd(&l); + if (hintsCallback) { + /* Force a refresh without hints to leave the previous + * line as the user typed it after a newline. */ + linenoiseHintsCallback *hc = hintsCallback; + hintsCallback = NULL; + refreshLine(&l); + hintsCallback = hc; + } + return (int)l.len; + case CTRL_C: /* ctrl-c */ + errno = EAGAIN; + return -1; + case BACKSPACE: /* backspace */ + case 8: /* ctrl-h */ + linenoiseEditBackspace(&l); + break; + case CTRL_D: /* ctrl-d, remove char at right of cursor, or if the + line is empty, act as end-of-file. */ + if (l.len > 0) { + linenoiseEditDelete(&l); + } else { + history_len--; + free(history[history_len]); + return -1; + } + break; + case CTRL_T: /* ctrl-t, swaps current character with previous. */ + if (l.pos > 0 && l.pos < l.len) { + int aux = buf[l.pos-1]; + buf[l.pos-1] = buf[l.pos]; + buf[l.pos] = aux; + if (l.pos != l.len-1) l.pos++; + refreshLine(&l); + } + break; + case CTRL_B: /* ctrl-b */ + linenoiseEditMoveLeft(&l); + break; + case CTRL_F: /* ctrl-f */ + linenoiseEditMoveRight(&l); + break; + case CTRL_P: /* ctrl-p */ + linenoiseEditHistoryNext(&l, LINENOISE_HISTORY_PREV); + break; + case CTRL_N: /* ctrl-n */ + linenoiseEditHistoryNext(&l, LINENOISE_HISTORY_NEXT); + break; + case ESC: /* escape sequence */ + /* Read the next two bytes representing the escape sequence. + * Use two calls to handle slow terminals returning the two + * chars at different times. */ + if (read(l.ifd,seq,1) == -1) break; + if (read(l.ifd,seq+1,1) == -1) break; + + /* ESC [ sequences. */ + if (seq[0] == '[') { + if (seq[1] >= '0' && seq[1] <= '9') { + /* Extended escape, read additional byte. */ + if (read(l.ifd,seq+2,1) == -1) break; + if (seq[2] == '~') { + switch(seq[1]) { + case '3': /* Delete key. */ + linenoiseEditDelete(&l); + break; + } + } + } else { + switch(seq[1]) { + case 'A': /* Up */ + linenoiseEditHistoryNext(&l, LINENOISE_HISTORY_PREV); + break; + case 'B': /* Down */ + linenoiseEditHistoryNext(&l, LINENOISE_HISTORY_NEXT); + break; + case 'C': /* Right */ + linenoiseEditMoveRight(&l); + break; + case 'D': /* Left */ + linenoiseEditMoveLeft(&l); + break; + case 'H': /* Home */ + linenoiseEditMoveHome(&l); + break; + case 'F': /* End*/ + linenoiseEditMoveEnd(&l); + break; + } + } + } + + /* ESC O sequences. */ + else if (seq[0] == 'O') { + switch(seq[1]) { + case 'H': /* Home */ + linenoiseEditMoveHome(&l); + break; + case 'F': /* End*/ + linenoiseEditMoveEnd(&l); + break; + } + } + break; + default: + if (linenoiseEditInsert(&l,c)) return -1; + break; + case CTRL_U: /* Ctrl+u, delete the whole line. */ + buf[0] = '\0'; + l.pos = l.len = 0; + refreshLine(&l); + break; + case CTRL_K: /* Ctrl+k, delete from current to end of line. */ + buf[l.pos] = '\0'; + l.len = l.pos; + refreshLine(&l); + break; + case CTRL_A: /* Ctrl+a, go to the start of the line */ + linenoiseEditMoveHome(&l); + break; + case CTRL_E: /* ctrl+e, go to the end of the line */ + linenoiseEditMoveEnd(&l); + break; + case CTRL_L: /* ctrl+l, clear screen */ + linenoiseClearScreen(); + refreshLine(&l); + break; + case CTRL_W: /* ctrl+w, delete previous word */ + linenoiseEditDeletePrevWord(&l); + break; + } + } + return l.len; +} + +/* This special mode is used by linenoise in order to print scan codes + * on screen for debugging / development purposes. It is implemented + * by the linenoise_example program using the --keycodes option. */ +void linenoisePrintKeyCodes(void) { + char quit[4]; + + printf("Linenoise key codes debugging mode.\n" + "Press keys to see scan codes. Type 'quit' at any time to exit.\n"); + if (enableRawMode(STDIN_FILENO) == -1) return; + memset(quit,' ',4); + while(1) { + char c; + int nread; + + nread = read(STDIN_FILENO,&c,1); + if (nread <= 0) continue; + memmove(quit,quit+1,sizeof(quit)-1); /* shift string to left. */ + quit[sizeof(quit)-1] = c; /* Insert current char on the right. */ + if (memcmp(quit,"quit",sizeof(quit)) == 0) break; + + printf("'%c' %02x (%d) (type quit to exit)\n", + isprint(c) ? c : '?', (int)c, (int)c); + printf("\r"); /* Go left edge manually, we are in raw mode. */ + fflush(stdout); + } + disableRawMode(STDIN_FILENO); +} + +/* This function calls the line editing function linenoiseEdit() using + * the STDIN file descriptor set in raw mode. */ +static int linenoiseRaw(char *buf, size_t buflen, const char *prompt) { + int count; + + if (buflen == 0) { + errno = EINVAL; + return -1; + } + + if (enableRawMode(STDIN_FILENO) == -1) return -1; + count = linenoiseEdit(STDIN_FILENO, STDOUT_FILENO, buf, buflen, prompt); + disableRawMode(STDIN_FILENO); + printf("\n"); + return count; +} + +/* This function is called when linenoise() is called with the standard + * input file descriptor not attached to a TTY. So for example when the + * program using linenoise is called in pipe or with a file redirected + * to its standard input. In this case, we want to be able to return the + * line regardless of its length (by default we are limited to 4k). */ +static char *linenoiseNoTTY(void) { + char *line = NULL; + size_t len = 0, maxlen = 0; + + while(1) { + if (len == maxlen) { + if (maxlen == 0) maxlen = 16; + maxlen *= 2; + char *oldval = line; + line = realloc(line,maxlen); + if (line == NULL) { + if (oldval) free(oldval); + return NULL; + } + } + int c = fgetc(stdin); + if (c == EOF || c == '\n') { + if (c == EOF && len == 0) { + free(line); + return NULL; + } else { + line[len] = '\0'; + return line; + } + } else { + line[len] = c; + len++; + } + } +} + +/* The high level function that is the main API of the linenoise library. + * This function checks if the terminal has basic capabilities, just checking + * for a blacklist of stupid terminals, and later either calls the line + * editing function or uses dummy fgets() so that you will be able to type + * something even in the most desperate of the conditions. */ +char *linenoise(const char *prompt) { + char buf[LINENOISE_MAX_LINE]; + int count; + + if (!isatty(STDIN_FILENO)) { + /* Not a tty: read from file / pipe. In this mode we don't want any + * limit to the line size, so we call a function to handle that. */ + return linenoiseNoTTY(); + } else if (isUnsupportedTerm()) { + size_t len; + + printf("%s",prompt); + fflush(stdout); + if (fgets(buf,LINENOISE_MAX_LINE,stdin) == NULL) return NULL; + len = strlen(buf); + while(len && (buf[len-1] == '\n' || buf[len-1] == '\r')) { + len--; + buf[len] = '\0'; + } + return strdup(buf); + } else { + count = linenoiseRaw(buf,LINENOISE_MAX_LINE,prompt); + if (count == -1) return NULL; + return strdup(buf); + } +} + +/* This is just a wrapper the user may want to call in order to make sure + * the linenoise returned buffer is freed with the same allocator it was + * created with. Useful when the main program is using an alternative + * allocator. */ +void linenoiseFree(void *ptr) { + free(ptr); +} + +/* ================================ History ================================= */ + +/* Free the history, but does not reset it. Only used when we have to + * exit() to avoid memory leaks are reported by valgrind & co. */ +static void freeHistory(void) { + if (history) { + int j; + + for (j = 0; j < history_len; j++) + free(history[j]); + free(history); + } +} + +/* At exit we'll try to fix the terminal to the initial conditions. */ +static void linenoiseAtExit(void) { + disableRawMode(STDIN_FILENO); + freeHistory(); +} + +/* This is the API call to add a new entry in the linenoise history. + * It uses a fixed array of char pointers that are shifted (memmoved) + * when the history max length is reached in order to remove the older + * entry and make room for the new one, so it is not exactly suitable for huge + * histories, but will work well for a few hundred of entries. + * + * Using a circular buffer is smarter, but a bit more complex to handle. */ +int linenoiseHistoryAdd(const char *line) { + char *linecopy; + + if (history_max_len == 0) return 0; + + /* Initialization on first call. */ + if (history == NULL) { + history = malloc(sizeof(char*)*history_max_len); + if (history == NULL) return 0; + memset(history,0,(sizeof(char*)*history_max_len)); + } + + /* Don't add duplicated lines. */ + if (history_len && !strcmp(history[history_len-1], line)) return 0; + + /* Add an heap allocated copy of the line in the history. + * If we reached the max length, remove the older line. */ + linecopy = strdup(line); + if (!linecopy) return 0; + if (history_len == history_max_len) { + free(history[0]); + memmove(history,history+1,sizeof(char*)*(history_max_len-1)); + history_len--; + } + history[history_len] = linecopy; + history_len++; + return 1; +} + +/* Set the maximum length for the history. This function can be called even + * if there is already some history, the function will make sure to retain + * just the latest 'len' elements if the new history length value is smaller + * than the amount of items already inside the history. */ +int linenoiseHistorySetMaxLen(int len) { + char **new; + + if (len < 1) return 0; + if (history) { + int tocopy = history_len; + + new = malloc(sizeof(char*)*len); + if (new == NULL) return 0; + + /* If we can't copy everything, free the elements we'll not use. */ + if (len < tocopy) { + int j; + + for (j = 0; j < tocopy-len; j++) free(history[j]); + tocopy = len; + } + memset(new,0,sizeof(char*)*len); + memcpy(new,history+(history_len-tocopy), sizeof(char*)*tocopy); + free(history); + history = new; + } + history_max_len = len; + if (history_len > history_max_len) + history_len = history_max_len; + return 1; +} + +/* Save the history in the specified file. On success 0 is returned + * otherwise -1 is returned. */ +int linenoiseHistorySave(const char *filename) { + mode_t old_umask = umask(S_IXUSR|S_IRWXG|S_IRWXO); + FILE *fp; + int j; + + fp = fopen(filename,"w"); + umask(old_umask); + if (fp == NULL) return -1; + chmod(filename,S_IRUSR|S_IWUSR); + for (j = 0; j < history_len; j++) + fprintf(fp,"%s\n",history[j]); + fclose(fp); + return 0; +} + +/* Load the history from the specified file. If the file does not exist + * zero is returned and no operation is performed. + * + * If the file exists and the operation succeeded 0 is returned, otherwise + * on error -1 is returned. */ +int linenoiseHistoryLoad(const char *filename) { + FILE *fp = fopen(filename,"r"); + char buf[LINENOISE_MAX_LINE]; + + if (fp == NULL) return -1; + + while (fgets(buf,LINENOISE_MAX_LINE,fp) != NULL) { + char *p; + + p = strchr(buf,'\r'); + if (!p) p = strchr(buf,'\n'); + if (p) *p = '\0'; + linenoiseHistoryAdd(buf); + } + fclose(fp); + return 0; +} diff --git a/src/linenoise/linenoise.h b/src/linenoise/linenoise.h new file mode 100644 index 000000000..ed20232c5 --- /dev/null +++ b/src/linenoise/linenoise.h @@ -0,0 +1,73 @@ +/* linenoise.h -- VERSION 1.0 + * + * Guerrilla line editing library against the idea that a line editing lib + * needs to be 20,000 lines of C code. + * + * See linenoise.c for more information. + * + * ------------------------------------------------------------------------ + * + * Copyright (c) 2010-2014, Salvatore Sanfilippo + * Copyright (c) 2010-2013, Pieter Noordhuis + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __LINENOISE_H +#define __LINENOISE_H + +#ifdef __cplusplus +extern "C" { +#endif + +typedef struct linenoiseCompletions { + size_t len; + char **cvec; +} linenoiseCompletions; + +typedef void(linenoiseCompletionCallback)(const char *, linenoiseCompletions *); +typedef char*(linenoiseHintsCallback)(const char *, int *color, int *bold); +typedef void(linenoiseFreeHintsCallback)(void *); +void linenoiseSetCompletionCallback(linenoiseCompletionCallback *); +void linenoiseSetHintsCallback(linenoiseHintsCallback *); +void linenoiseSetFreeHintsCallback(linenoiseFreeHintsCallback *); +void linenoiseAddCompletion(linenoiseCompletions *, const char *); + +char *linenoise(const char *prompt); +void linenoiseFree(void *ptr); +int linenoiseHistoryAdd(const char *line); +int linenoiseHistorySetMaxLen(int len); +int linenoiseHistorySave(const char *filename); +int linenoiseHistoryLoad(const char *filename); +void linenoiseClearScreen(void); +void linenoiseSetMultiLine(int ml); +void linenoisePrintKeyCodes(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __LINENOISE_H */ diff --git a/src/nix/local.mk b/src/nix/local.mk index e71cf16fa..c7d2d328a 100644 --- a/src/nix/local.mk +++ b/src/nix/local.mk @@ -2,12 +2,8 @@ programs += nix nix_DIR := $(d) -nix_SOURCES := $(wildcard $(d)/*.cc) +nix_SOURCES := $(wildcard $(d)/*.cc) src/linenoise/linenoise.c nix_LIBS = libexpr libmain libstore libutil libformat -ifeq ($(HAVE_READLINE), 1) - nix_LDFLAGS += -lreadline -endif - $(eval $(call install-symlink, nix, $(bindir)/nix-hash)) diff --git a/src/nix/repl.cc b/src/nix/repl.cc index 13488bf1d..437c7903e 100644 --- a/src/nix/repl.cc +++ b/src/nix/repl.cc @@ -1,13 +1,8 @@ -#if HAVE_LIBREADLINE - #include #include #include -#include -#include - #include "shared.hh" #include "eval.hh" #include "eval-inline.hh" @@ -18,6 +13,9 @@ #include "affinity.hh" #include "globals.hh" #include "command.hh" +#include "finally.hh" + +#include "src/linenoise/linenoise.h" namespace nix { @@ -44,14 +42,11 @@ struct NixRepl const Path historyFile; - StringSet completions; - StringSet::iterator curCompletion; - NixRepl(const Strings & searchPath, nix::ref store); ~NixRepl(); void mainLoop(const Strings & files); - void completePrefix(string prefix); - bool getLine(string & input, const char * prompt); + StringSet completePrefix(string prefix); + bool getLine(string & input, const std::string &prompt); Path getDerivationPath(Value & v); bool processLine(string line); void loadFile(const Path & path); @@ -122,7 +117,17 @@ NixRepl::NixRepl(const Strings & searchPath, nix::ref store) NixRepl::~NixRepl() { - write_history(historyFile.c_str()); + linenoiseHistorySave(historyFile.c_str()); +} + + +static NixRepl * curRepl; // ugly + +static void completionCallback(const char * s, linenoiseCompletions *lc) +{ + /* Otherwise, return all symbols that start with the prefix. */ + for (auto & c : curRepl->completePrefix(s)) + linenoiseAddCompletion(lc, c.c_str()); } @@ -137,22 +142,20 @@ void NixRepl::mainLoop(const Strings & files) reloadFiles(); if (!loadedFiles.empty()) std::cout << std::endl; - // Allow nix-repl specific settings in .inputrc - rl_readline_name = "nix-repl"; - using_history(); createDirs(dirOf(historyFile)); - read_history(historyFile.c_str()); + linenoiseHistorySetMaxLen(1000); + linenoiseHistoryLoad(historyFile.c_str()); - string input; + curRepl = this; + linenoiseSetCompletionCallback(completionCallback); + + std::string input; while (true) { // When continuing input from previous lines, don't print a prompt, just align to the same // number of chars as the prompt. - const char * prompt = input.empty() ? "nix-repl> " : " "; - if (!getLine(input, prompt)) { - std::cout << std::endl; + if (!getLine(input, input.empty() ? "nix-repl> " : " ")) break; - } try { if (!removeWhitespace(input).empty() && !processLine(input)) return; @@ -170,103 +173,57 @@ void NixRepl::mainLoop(const Strings & files) printMsg(lvlError, format(error + "%1%%2%") % (settings.showTrace ? e.prefix() : "") % e.msg()); } - // We handled the current input fully, so we should clear it and read brand new input. + // We handled the current input fully, so we should clear it + // and read brand new input. + linenoiseHistoryAdd(input.c_str()); input.clear(); std::cout << std::endl; } } -/* Apparently, the only way to get readline() to return on Ctrl-C - (SIGINT) is to use siglongjmp(). That's fucked up... */ -static sigjmp_buf sigintJmpBuf; - - -static void sigintHandler(int signo) +bool NixRepl::getLine(string & input, const std::string &prompt) { - siglongjmp(sigintJmpBuf, 1); -} - - -/* Oh, if only g++ had nested functions... */ -NixRepl * curRepl; - -char * completerThunk(const char * s, int state) -{ - string prefix(s); - - /* If the prefix has a slash in it, use readline's builtin filename - completer. */ - if (prefix.find('/') != string::npos) - return rl_filename_completion_function(s, state); - - /* Otherwise, return all symbols that start with the prefix. */ - if (state == 0) { - curRepl->completePrefix(s); - curRepl->curCompletion = curRepl->completions.begin(); - } - if (curRepl->curCompletion == curRepl->completions.end()) return 0; - return strdup((curRepl->curCompletion++)->c_str()); -} - - -bool NixRepl::getLine(string & input, const char * prompt) -{ - struct sigaction act, old; - act.sa_handler = sigintHandler; - sigfillset(&act.sa_mask); - act.sa_flags = 0; - if (sigaction(SIGINT, &act, &old)) - throw SysError("installing handler for SIGINT"); - - static sigset_t savedSignalMask, set; - sigemptyset(&set); - sigaddset(&set, SIGINT); - - if (sigprocmask(SIG_UNBLOCK, &set, &savedSignalMask)) - throw SysError("unblocking SIGINT"); - - if (sigsetjmp(sigintJmpBuf, 1)) { - input.clear(); - } else { - curRepl = this; - rl_completion_entry_function = completerThunk; - - char * s = readline(prompt); - if (!s) return false; - input.append(s); - input.push_back('\n'); - if (!removeWhitespace(s).empty()) { - add_history(s); - append_history(1, 0); - } - free(s); - } - - _isInterrupted = 0; - - if (sigprocmask(SIG_SETMASK, &savedSignalMask, nullptr)) - throw SysError("restoring signals"); - - if (sigaction(SIGINT, &old, 0)) - throw SysError("restoring handler for SIGINT"); - + char * s = linenoise(prompt.c_str()); + Finally doFree([&]() { linenoiseFree(s); }); + if (!s) return false; + input += s; return true; } -void NixRepl::completePrefix(string prefix) +StringSet NixRepl::completePrefix(string prefix) { - completions.clear(); + StringSet completions; - size_t dot = prefix.rfind('.'); + size_t start = prefix.find_last_of(" \n\r\t(){}[]"); + std::string prev, cur; + if (start == std::string::npos) { + prev = ""; + cur = prefix; + } else { + prev = std::string(prefix, 0, start + 1); + cur = std::string(prefix, start + 1); + } - if (dot == string::npos) { + size_t slash, dot; + + if ((slash = cur.rfind('/')) != string::npos) { + try { + auto dir = std::string(cur, 0, slash); + auto prefix2 = std::string(cur, slash + 1); + for (auto & entry : readDirectory(dir == "" ? "/" : dir)) { + if (entry.name[0] != '.' && hasPrefix(entry.name, prefix2)) + completions.insert(prev + dir + "/" + entry.name); + } + } catch (Error &) { + } + } else if ((dot = cur.rfind('.')) == string::npos) { /* This is a variable name; look it up in the current scope. */ - StringSet::iterator i = varNames.lower_bound(prefix); + StringSet::iterator i = varNames.lower_bound(cur); while (i != varNames.end()) { - if (string(*i, 0, prefix.size()) != prefix) break; - completions.insert(*i); + if (string(*i, 0, cur.size()) != cur) break; + completions.insert(prev + *i); i++; } } else { @@ -274,8 +231,8 @@ void NixRepl::completePrefix(string prefix) /* This is an expression that should evaluate to an attribute set. Evaluate it to get the names of the attributes. */ - string expr(prefix, 0, dot); - string prefix2 = string(prefix, dot + 1); + string expr(cur, 0, dot); + string cur2 = string(cur, dot + 1); Expr * e = parseString(expr); Value v; @@ -284,8 +241,8 @@ void NixRepl::completePrefix(string prefix) for (auto & i : *v.attrs) { string name = i.name; - if (string(name, 0, prefix2.size()) != prefix2) continue; - completions.insert(expr + "." + name); + if (string(name, 0, cur2.size()) != cur2) continue; + completions.insert(prev + expr + "." + name); } } catch (ParseError & e) { @@ -296,6 +253,8 @@ void NixRepl::completePrefix(string prefix) // Quietly ignore undefined variable errors. } } + + return completions; } @@ -728,5 +687,3 @@ struct CmdRepl : StoreCommand static RegisterCommand r1(make_ref()); } - -#endif