The intent of the code was that if the window size cannot be determined,
it would be treated as having the maximum possible size. Because of a
missing assignment, it was actually treated as having a width of 0.
The reason the width could not be determined was because it was obtained
from stdout, not stderr, even though the printing was done to stderr.
This commit addresses both issues.
This adds a command 'nix make-content-addressable' that rewrites the
specified store paths into content-addressable paths. The advantage of
such paths is that 1) they can be imported without signatures; 2) they
can enable deduplication in cases where derivation changes do not
cause output changes (apart from store path hashes).
For example,
$ nix make-content-addressable -r nixpkgs.cowsay
rewrote '/nix/store/g1g31ah55xdia1jdqabv1imf6mcw0nb1-glibc-2.25-49' to '/nix/store/48jfj7bg78a8n4f2nhg269rgw1936vj4-glibc-2.25-49'
...
rewrote '/nix/store/qbi6rzpk0bxjw8lw6azn2mc7ynnn455q-cowsay-3.03+dfsg1-16' to '/nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16'
We can then copy the resulting closure to another store without
signatures:
$ nix copy --trusted-public-keys '' ---to ~/my-nix /nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16
In order to support self-references in content-addressable paths,
these paths are hashed "modulo" self-references, meaning that
self-references are zeroed out during hashing. Somewhat annoyingly,
this means that the NAR hash stored in the Nix database is no longer
necessarily equal to the output of "nix hash-path"; for
content-addressable paths, you need to pass the --modulo flag:
$ nix path-info --json /nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16 | jq -r .[].narHash
sha256:0ri611gdilz2c9rsibqhsipbfs9vwcqvs811a52i2bnkhv7w9mgw
$ nix hash-path --type sha256 --base32 /nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16
1ggznh07khq0hz6id09pqws3a8q9pn03ya3c03nwck1kwq8rclzs
$ nix hash-path --type sha256 --base32 /nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16 --modulo iq6g2x4q62xp7y7493bibx0qn5w7xz67
0ri611gdilz2c9rsibqhsipbfs9vwcqvs811a52i2bnkhv7w9mgw
Introduce the SizeSource which allows to bound how much data is being
read from a source. It also contains a drainAll() function to discard
the rest of the source, useful to keep the nix protocol in sync.
Passing `--post-build-hook /foo/bar` to a nix-* command will cause
`/foo/bar` to be executed after each build with the following
environment variables set:
DRV_PATH=/nix/store/drv-that-has-been-built.drv
OUT_PATHS=/nix/store/...build /nix/store/...build-bin /nix/store/...build-dev
This can be useful in particular to upload all the builded artifacts to
the cache (including the ones that don't appear in the runtime closure
of the final derivation or are built because of IFD).
This new feature prints the stderr/stdout output to the `nix-build`
and `nix build` client, and the output is printed in a Nix 2
compatible format:
[nix]$ ./inst/bin/nix-build ./test.nix
these derivations will be built:
/nix/store/ishzj9ni17xq4hgrjvlyjkfvm00b0ch9-my-example-derivation.drv
building '/nix/store/ishzj9ni17xq4hgrjvlyjkfvm00b0ch9-my-example-derivation.drv'...
hello!
bye!
running post-build-hook '/home/grahamc/projects/github.com/NixOS/nix/post-hook.sh'...
post-build-hook: + sleep 1
post-build-hook: + echo 'Signing paths' /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
post-build-hook: Signing paths /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
post-build-hook: + sleep 1
post-build-hook: + echo 'Uploading paths' /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
post-build-hook: Uploading paths /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
post-build-hook: + sleep 1
post-build-hook: + printf 'very important stuff'
/nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
[nix-shell:~/projects/github.com/NixOS/nix]$ ./inst/bin/nix build -L -f ./test.nix
my-example-derivation> hello!
my-example-derivation> bye!
my-example-derivation (post)> + sleep 1
my-example-derivation (post)> + echo 'Signing paths' /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
my-example-derivation (post)> Signing paths /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
my-example-derivation (post)> + sleep 1
my-example-derivation (post)> + echo 'Uploading paths' /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
my-example-derivation (post)> Uploading paths /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
my-example-derivation (post)> + sleep 1
my-example-derivation (post)> + printf 'very important stuff'
[1 built, 0.0 MiB DL]
Co-authored-by: Graham Christensen <graham@grahamc.com>
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
Our use of boost::coroutine2 depends on -lboost_context,
which in turn depends on `-lboost_thread`, which in turn depends
on `-lboost_system`.
I suspect that this builds on nix only because of low-level hacks
like NIX_LDFLAGS.
This commit passes the proper linker flags, thus fixing bootstrap
builds on non-nix distributions like Ubuntu 16.04.
With these changes, I can build Nix on Ubuntu 16.04 using:
./bootstrap.sh
./configure --prefix=$HOME/editline-prefix \
--disable-doc-gen \
CXX=g++-7 \
--with-boost=$HOME/boost-prefix \
EDITLINE_CFLAGS=-I$HOME/editline-prefix/include \
EDITLINE_LIBS=-leditline \
LDFLAGS=-L$HOME/editline-prefix/lib
make
where
* g++-7 comes from gcc-7 from
https://launchpad.net/~ubuntu-toolchain-r/+archive/ubuntu/test,
* editline 1.14 from https://github.com/troglobit/editline/releases/tag/1.14.0
was installed into `$HOME/editline-prefix`
(because Ubuntu 16.04's `editline` is too old to have the function nix uses),
* boost 1.66 from
https://www.boost.org/doc/libs/1_66_0/more/getting_started/unix-variants.html
was installed into $HOME/boost-prefix (because Ubuntu 16.04 only has 1.58)
Once we've started writing data to a Sink, we can't restart a download
request, because then we end up writing duplicate data to the
Sink. Therefore we shouldn't handle retries in Downloader but at a
higher level (in particular, in copyStorePath()).
Fixes#2952.
(cherry picked from commit a67cf5a358)
This causes 'nix' to print build log output to stderr rather than
showing the last log line in the progress bar. Log lines are prefixed
by the name of the derivation (minus the version string), e.g.
binutils> make[1]: Leaving directory '/build/binutils-2.31.1'
binutils-wrapper> unpacking sources
binutils-wrapper> patching sources
...
binutils-wrapper> Using dynamic linker: '/nix/store/kr51dlsj9v5cr4n8700jliyz8v5b2q7q-bootstrap-stage0-glibc/lib/ld-linux-x86-64.so.2'
bootstrap-stage2-gcc-wrapper> unpacking sources
...
linux-headers> unpacking sources
linux-headers> unpacking source archive /nix/store/8javli69jhj3bkql2c35gsj5vl91p382-linux-4.19.16.tar.xz
To determine which seccomp filters to install, we were incorrectly
using settings.thisSystem, which doesn't denote the actual system when
--system is used.
Fixes#2791.
This reverts commit a0ef21262f. This
doesn't work in 'nix run' and nix-shell because setns() fails in
multithreaded programs, and Boehm GC mark threads are uncancellable.
Fixes#2646.
SRI hashes (https://www.w3.org/TR/SRI/) combine the hash algorithm and
a base-64 hash. This allows more concise and standard hash
specifications. For example, instead of
import <nix/fetchurl.nl> {
url = https://nixos.org/releases/nix/nix-2.1.3/nix-2.1.3.tar.xz;
sha256 = "5d22dad058d5c800d65a115f919da22938c50dd6ba98c5e3a183172d149840a4";
};
you can write
import <nix/fetchurl.nl> {
url = https://nixos.org/releases/nix/nix-2.1.3/nix-2.1.3.tar.xz;
hash = "sha256-XSLa0FjVyADWWhFfkZ2iKTjFDda6mMXjoYMXLRSYQKQ=";
};
In fixed-output derivations, the outputHashAlgo is no longer mandatory
if outputHash specifies the hash (either as an SRI or in the old
"<type>:<hash>" format).
'nix hash-{file,path}' now print hashes in SRI format by default. I
also reverted them to use SHA-256 by default because that's what we're
using most of the time in Nixpkgs.
Suggested by @zimbatm.
Previously, config would only be read from XDG_CONFIG_HOME. This change
allows reading config from additional directories, which enables e.g.
per-project binary caches or chroot stores with the help of direnv.
In particular this causes copyStorePath() from HttpBinaryCacheStore to
only start a download if needed. E.g. if the destination LocalStore
goes to sleep waiting for the path lock and another process creates
the path, then LocalStore::addToStore() will never read from the
source so we don't have to do the download.
‘geteuid’ gives us the user that the command is being run as,
including in setuid modes. By using geteuid to determind id, we can
avoid the ‘sudo -i’ hack when upgrading Nix. So now, upgrading Nix on
macOS is as simple as:
$ sudo nix-channel --update
$ sudo nix-env -u
$ sudo launchctl stop org.nixos.nix-daemon
$ sudo launchctl start org.nixos.nix-daemon
or
$ sudo systemctl restart nix-daemon
This didn't work anymore since decompression was only done in the
non-coroutine case.
Decompressors are now sinks, just like compressors.
Also fixed a bug in bzip2 API handling (we have to handle BZ_RUN_OK
rather than BZ_OK), which we didn't notice because there was a missing
'throw':
if (ret != BZ_OK)
CompressionError("error while compressing bzip2 file");
This reduces memory consumption of
nix copy --from file://... --to ~/my-nix /nix/store/95cwv4q54dc6giaqv6q6p4r02ia2km35-blender-2.79
from 514 MiB to 18 MiB for an uncompressed binary cache, and from 192
MiB to 53 MiB for a bzipped binary cache. It may also be faster
because fetching can happen concurrently with decompression/writing.
Continuation of 48662d151b.
Issue https://github.com/NixOS/nix/issues/1681.
Allow global config settings to be defined in multiple Config
classes. For example, this means that libutil can have settings and
evaluator settings can be moved out of libstore. The Config classes
are registered in a new GlobalConfig class to which config files
etc. are applied.
Relevant to https://github.com/NixOS/nix/issues/2009 in that it
removes the need for ad hoc handling of useCaseHack, which was the
underlying cause of that issue.
For instance, this reduced the memory consumption of
$ nix copy --from ssh://localhost --to ~/my-nix /nix/store/1n7x0yv8vq6zi90hfmian84vdhd04bgp-blender-2.79a
from 632 MiB to 16 MiB.
E.g.
cannot build on 'ssh://mac1': cannot connect to 'mac1': bash: nix-store: command not found
cannot build on 'ssh://mac2': cannot connect to 'mac2': Host key verification failed.
cannot build on 'ssh://mac3': cannot connect to 'mac3': Received disconnect from 213... port 6001:2: Too many authentication failures
Authentication failed.
copyStorePath() now pipes the output of srcStore->narFromPath()
directly into dstStore->addToStore(). The sink used by the former is
converted into a source usable by the latter using
boost::coroutine2. This is based on [1].
This reduces the maximum resident size of
$ nix build --store ~/my-nix/ /nix/store/b0zlxla7dmy1iwc3g459rjznx59797xy-binutils-2.28.1 --substituters file:///tmp/binary-cache-xz/ --no-require-sigs
from 418592 KiB to 53416 KiB. (The previous commit also reduced the
runtime from ~4.2s to ~3.4s, not sure why.) A further improvement will
be to download files into a Sink.
[1] https://github.com/NixOS/nix/compare/master...Mathnerd314:dump-fix-coroutine#diff-dcbcac55a634031f9cc73707da6e4b18
Issue #1969.
It was holding on to a Value* (i.e. a std::shared_ptr<ValidPathInfo>*)
outside of the pathInfoCache lock, so the std::shared_ptr could be
destroyed between the release of the lock and the decrement of the
std::shared_ptr refcount. This can happen if more than
'path-info-cache-size' paths are added in the meantime, *or* if
clearPathInfoCache() is called. The hydra-queue-runner queue monitor
thread periodically calls the later, so is likely to trigger a crash.
Fixes https://github.com/NixOS/hydra/issues/542.
The assertion is broken because there is no one-to-one mapping from
length of a base64 string to the length of the output.
E.g.
"1q69lz7Empb06nzfkj651413n9icx0njmyr3xzq1j9q=" results in a 32-byte output.
"1q69lz7Empb06nzfkj651413n9icx0njmyr3xzq1j9qy" results in a 33-byte output.
To reproduce, evaluate:
builtins.derivationStrict {
name = "0";
builder = "0";
system = "0";
outputHashAlgo = "sha256";
outputHash = "1q69lz7Empb06nzfkj651413n9icx0njmyr3xzq1j9qy";
}
Found by afl-fuzz.
nix-store --export, nix-store --dump, and nix dump-path would previously
fail silently if writing the data out failed, because
a) FdSink::write ignored exceptions, and
b) the commands relied on FdSink's destructor, which ignores
exceptions, to flush the data out.
This could cause rather opaque issues with installing nixos, because
nix-store --export would happily proceed even if it couldn't write its
data out (e.g. if nix-store --import on the other side of the pipe
failed).
This commit adds tests that expose these issues in the nix-store
commands, and fixes them for all three.
All ANSI sequences except color setting are now filtered out. In
particular, terminal resets (such as from NixOS VM tests) are filtered
out.
Also, fix the completely broken tab character handling.
the case of hydra where the overhead of single threaded encoding is more
noticeable e.g most of the time spent in "Sending inputs"/"Receiving outputs"
is due to compression while the actual upload to the binary cache seems
to be negligible.
In this mode, the following restrictions apply:
* The builtins currentTime, currentSystem and storePath throw an
error.
* $NIX_PATH and -I are ignored.
* fetchGit and fetchMercurial require a revision hash.
* fetchurl and fetchTarball require a sha256 attribute.
* No file system access is allowed outside of the paths returned by
fetch{Git,Mercurial,url,Tarball}. Thus 'nix build -f ./foo.nix' is
not allowed.
Thus, the evaluation result is completely reproducible from the
command line arguments. E.g.
nix build --pure-eval '(
let
nix = fetchGit { url = https://github.com/NixOS/nixpkgs.git; rev = "9c927de4b179a6dd210dd88d34bda8af4b575680"; };
nixpkgs = fetchGit { url = https://github.com/NixOS/nixpkgs.git; ref = "release-17.09"; rev = "66b4de79e3841530e6d9c6baf98702aa1f7124e4"; };
in (import (nix + "/release.nix") { inherit nix nixpkgs; }).build.x86_64-linux
)'
The goal is to enable completely reproducible and traceable
evaluation. For example, a NixOS configuration could be fully
described by a single Git commit hash. 'nixos-rebuild' would do
something like
nix build --pure-eval '(
(import (fetchGit { url = file:///my-nixos-config; rev = "..."; })).system
')
where the Git repository /my-nixos-config would use further fetchGit
calls or Git externals to fetch Nixpkgs and whatever other
dependencies it has. Either way, the commit hash would uniquely
identify the NixOS configuration and allow it to reproduced.
* Look for both 'brotli' and 'bro' as external command,
since upstream has renamed it in newer versions.
If neither are found, current runtime behavior
is preserved: try to find 'bro' on PATH.
* Limit amount handed to BrotliEncoderCompressStream
to ensure interrupts are processed in a timely manner.
Testing shows negligible performance impact.
(Other compression sinks don't seem to require this)
Jonas Chevalier
Linus Heckemann