Commit graph

1959 commits

Author SHA1 Message Date
Maximilian Bosch 79d0ae6670 Merge "libstore/local-derivation-goal: prohibit creating setuid/setgid binaries" into main 2024-05-04 07:26:15 +00:00
Maximilian Bosch 045ee37438 libstore/local-derivation-goal: prohibit creating setuid/setgid binaries
With Linux kernel >=6.6 & glibc 2.39 a `fchmodat2(2)` is available that
isn't filtered away by the libseccomp sandbox.

Being able to use this to bypass that restriction has surprising results
for some builds such as lxc[1]:

> With kernel ≥6.6 and glibc 2.39, lxc's install phase uses fchmodat2,
> which slips through 9b88e52846/src/libstore/build/local-derivation-goal.cc (L1650-L1663).
> The fixupPhase then uses fchmodat, which fails.
> With older kernel or glibc, setting the suid bit fails in the
> install phase, which is not treated as fatal, and then the
> fixup phase does not try to set it again.

Please note that there are still ways to bypass this sandbox[2] and this is
mostly a fix for the breaking builds.

This change works by creating a syscall filter for the `fchmodat2`
syscall (number 452 on most systems). The problem is that glibc 2.39
is needed to have the correct syscall number available via
`__NR_fchmodat2` / `__SNR_fchmodat2`, but this flake is still on
nixpkgs 23.11. To have this change everywhere and not dependent on the
glibc this package is built against, I added a header
"fchmodat2-compat.hh" that sets the syscall number based on the
architecture. On most platforms its 452 according to glibc with a few
exceptions:

    $ rg --pcre2 'define __NR_fchmodat2 (?!452)'
    sysdeps/unix/sysv/linux/x86_64/x32/arch-syscall.h
    58:#define __NR_fchmodat2 1073742276

    sysdeps/unix/sysv/linux/mips/mips64/n32/arch-syscall.h
    67:#define __NR_fchmodat2 6452

    sysdeps/unix/sysv/linux/mips/mips64/n64/arch-syscall.h
    62:#define __NR_fchmodat2 5452

    sysdeps/unix/sysv/linux/mips/mips32/arch-syscall.h
    70:#define __NR_fchmodat2 4452

    sysdeps/unix/sysv/linux/alpha/arch-syscall.h
    59:#define __NR_fchmodat2 562

I added a small regression-test to the setuid integration-test that
attempts to set the suid bit on a file using the fchmodat2 syscall.
I confirmed that the test fails without the change in
local-derivation-goal.

Additionally, we require libseccomp 2.5.5 or greater now: as it turns
out, libseccomp maintains an internal syscall table and
validates each rule against it. This means that when using libseccomp
2.5.4 or older, one may pass `452` as syscall number against it, but
since it doesn't exist in the internal structure, `libseccomp` will refuse
to create a filter for that. This happens with nixpkgs-23.11, i.e. on
stable NixOS and when building Lix against the project's flake.

To work around that

* a backport of libseccomp 2.5.5 on upstream nixpkgs has been
  scheduled[3].

* the package now uses libseccomp 2.5.5 on its own already. This is to
  provide a quick fix since the correct fix for 23.11 is still a staging cycle
  away.

We still need the compat header though since `SCMP_SYS(fchmodat2)`
internally transforms this into `__SNR_fchmodat2` which points to
`__NR_fchmodat2` from glibc 2.39, so it wouldn't build on glibc 2.38.
The updated syscall table from libseccomp 2.5.5 is NOT used for that
step, but used later, so we need both, our compat header and their
syscall table 🤷

Relevant PRs in CppNix:

* https://github.com/NixOS/nix/pull/10591
* https://github.com/NixOS/nix/pull/10501

[1] https://github.com/NixOS/nixpkgs/issues/300635#issuecomment-2031073804
[2] https://github.com/NixOS/nixpkgs/issues/300635#issuecomment-2030844251
[3] https://github.com/NixOS/nixpkgs/pull/306070

(cherry picked from commit ba6804518772e6afb403dd55478365d4b863c854)
Change-Id: I6921ab5a363188c6bff617750d00bb517276b7fe
2024-05-03 16:29:06 +02:00
Théophane Hufschmitt 8458d98b27 Rename nix show-config to nix config show
Part of #7672

My main motivation is to be able to use `nix.checkConfig`[1]. This
doesn't work with Lix currently since the module uses `nix show-config`
if the Nix version is <2.20pre and `nix config show` otherwise. I think
this is the only instance where nixpkgs checks for which Nix commands
exist that affects us now, so I figured we could just perform the rename
here as well[2] and still provide the current version number[3].

I don't have a strong opinion on whether to deprecate `nix show-config`,
the warning is added there automatically.

(cherry picked from commit f300e11b056dea414d7d77bbc6e5a7dc5d9ddd41)

[1] https://nixos.org/manual/nixos/stable/options.html#opt-nix.checkConfig
[2] I should add that I don't use the "official" ways of installing Lix
    because using the flake directly and callPackaging it seemed to fit
    better into my workflow: I already have a little mess to make
    sure Hydra from the flake uses the correct pkgs.nix and I didn't
    want to complicate it further while keeping a single package-set I
    can build in CI. Don't get me wrong, I think such a module for a
    quick-start is very important, just giving context on why I bother
    in the first place :)
[3] When we go public, I think it's worth considering to add support in
    nixpkgs itself for Lix.

Change-Id: I47b4239b05cbeda3c370d2fa56ea768b768768ac
2024-05-03 16:26:16 +02:00
eldritch horrors d55b158e24 libutil: make rewriteStrings sound
this is used in CA rewriting, replacement of placeholders in
derivations, generating scripts for devShells, and some more
places. in all of these transitive replacements are unsound,
and overlapping replacements would be as well. there even is
a test that transitive replacements do not happen (in the CA
RewriteSink suite), but none for overlapping replacements. a
minimally surprising binary rewriter surely would not do any
of these replacements, the only reason we have not seen this
break yet is probably that rewriteStrings is only called for
store paths and things that look like store paths (and those
should never overlap nor admit such transitive replacements)

Change-Id: I6fc29f939d5061d9f56c752624a823ece8437c07
2024-05-03 00:50:31 +00:00
Qyriad 076dfd30c6 Merge changes from topic "profile-v3" into main
* changes:
  nix3-profile: remove check "name" attr in manifests
  Add profile migration test
  nix3-profile: make element names stable
  getNameFromURL(): Support uppercase characters in attribute names
  nix3-profile: remove indices
  nix3-profile: allow using human-readable names to select packages
  implement parsing human-readable names from URLs
2024-05-02 20:15:48 +00:00
Eelco Dolstra 5d2031f92d Add profile migration test
(cherry picked from commit 72560f7bbef2ab3c02b8ca040fe084328bdd5fbe)

Upstream-PR: https://github.com/NixOS/nix/pull/9656
Change-Id: I405e5848e2627a76940220fb6aebadfb8f094afb
2024-05-02 12:59:15 -06:00
Qyriad e0911eef73 nix3-profile: make element names stable
Based off of commit 6268a45b650f563bae2360e0540920a2959bdd40

Upstream-PR: https://github.com/NixOS/nix/pull/9656
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
Change-Id: I0fcf069a8537c61ad6fc4eee1f3c193a708ea1c4
2024-05-02 12:59:15 -06:00
Eelco Dolstra ce70f02aff getNameFromURL(): Support uppercase characters in attribute names
In particular, this makes it handle 'legacyPackages' correctly.

(cherry picked from commit 936a3642264ac159f3f9093710be3465b70e0e89)

Upstream-PR: https://github.com/NixOS/nix/pull/9657
Change-Id: Icc4efe02f7f8e90a2970589f72fd3d3cd4418d95
2024-05-02 12:02:28 -06:00
Qyriad e98fc952a8 nix3-profile: remove indices
Based off of commit 3187bc9ac3dd193b9329ef68c73ac3cca794ed78

Upstream-PR: https://github.com/NixOS/nix/pull/9656
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
Change-Id: I8ac4a33314cd1cf9de95404c20f58e883460acc7
2024-05-02 12:02:28 -06:00
Qyriad f88423813f nix3-profile: allow using human-readable names to select packages
These names are parsed from the URL provided for that package

Based off of commit 257b768436a0e8ab7887f9b790c5b92a7fe51ef5

Upstream-PR: https://github.com/NixOS/nix/pull/8678
Co-authored-by: Felix Uhl <felix.uhl@outlook.com>
Change-Id: I76d5f9cfb11d3d2915b3dd1db21d7bb49e91f4fb
2024-05-02 12:02:28 -06:00
Robert Hensing b7ce11c97d Disallow store path names that are . or .. (plus opt. -)
As discussed in the maintainer meeting on 2024-01-29.

Mainly this is to avoid a situation where the name is parsed and
treated as a file name, mostly to protect users.
.-* and ..-* are also considered invalid because they might strip
on that separator to remove versions. Doesn't really work, but that's
what we decided, and I won't argue with it, because .-* probably
doesn't seem to have a real world application anyway.
We do still permit a 1-character name that's just "-", which still
poses a similar risk in such a situation. We can't start disallowing
trailing -, because a non-zero number of users will need it and we've
seen how annoying and painful such a change is.

What matters most is preventing a situation where . or .. can be
injected, and to just get this done.

(cherry picked from commit f1b4663805a9dbcb1ace64ec110092d17c9155e0)
Change-Id: I900a8509933cee662f888c3c76fa8986b0058839
2024-05-02 19:34:38 +02:00
Robert Hensing 4b3dc66386 test: Generate distinct hashes
Gen::just is the constant generator. Don't just return that!

(cherry picked from commit 8406da28773f050e00a006e4812e3ecbf919a2a9)
Change-Id: Ibfd0bd40f90942077a4720086ce0cd3bfabef79d
2024-05-02 19:34:21 +02:00
Robert Hensing 2eec547d7d test: Generate distinct path names
Gen: :just is the constant generator. Don't just return that!

(cherry picked from commit 69bbd5852af9b2f0b794162bd1debcdf64fc6648)
Change-Id: Id6e58141f5a42a1f67bd11d48c87b32a3ebd0500
2024-05-02 19:34:04 +02:00
Robert Hensing fae6ae2122 parseStorePath: Support leading period
(cherry picked from commit b13e6a76b4f289c6db69ffaa7bd35b7e44f2a391)
Change-Id: Ie14be437d87d17248f80e1f009aa2a4311ddede6
2024-05-02 19:34:03 +02:00
Robert Hensing 3a058dc4b3 Revert "StorePath: reject names starting with '.'"
This reverts commit 24bda0c7b381e1a017023c6f7cb9661fae8560bd.

(cherry picked from commit 9ddd0f2af8fd95e1380027a70d0aa650ea2fd5e4)
Change-Id: Ideb547e2a8ac911cf39d58d3e0c1553867bdd776
2024-05-02 18:53:51 +02:00
Qyriad 1425aa0b7c implement parsing human-readable names from URLs
Based off of commit 257b768436a0e8ab7887f9b790c5b92a7fe51ef5

Upstream-PR: https://github.com/NixOS/nix/pull/8678
Co-authored-by: Felix Uhl <felix.uhl@outlook.com>
Change-Id: Idcb7f6191ca3310ef9dc854197f7798260c3f71d
2024-04-30 18:11:14 -06:00
Qyriad e2ab89a74b add VM test for nix upgrade-nix
This commit adds a new NixOS VM test, which tests that `nix upgrade-nix`
works on both kinds of profiles (manifest.nix and manifest.json).

Done as a separate commit from 831d18a13, since it relies on the
--store-path argument from 026c90e5f as well.

Change-Id: I5fc94b751d252862cb6cffb541a4c072faad9f3b
2024-04-29 01:19:21 +00:00
Maximilian Bosch 8773439a85 Merge "ssh-ng: Set log-fd for ssh to 4 by default" into main 2024-04-26 18:30:33 +00:00
Maximilian Bosch 104448e75d ssh-ng: Set log-fd for ssh to 4 by default
That's expected by `build-remote` and makes sure that errors are
correctly forwarded to the user. For instance, let's say that the
host-key of `example.org` is unknown and

    nix-build ../nixpkgs -A hello -j0 --builders 'ssh-ng://example.org'

is issued, then you get the following output:

    cannot build on 'ssh-ng://example.org?&': error: failed to start SSH connection to 'example.org'
    Failed to find a machine for remote build!
    derivation: yh46gakxq3kchrbihwxvpn5bmadcw90b-hello-2.12.1.drv
    required (system, features): (x86_64-linux, [])
    2 available machines:
    [...]

The relevant information (`Host key verification failed`) ends up in the
daemon's log, but that's not very obvious considering that the daemon
isn't very chatty normally.

This can be fixed - the same way as its done for legacy-ssh - by passing
fd 4 to the SSH wrapper. Now you'd get the following error:

    cannot build on 'ssh-ng://example.org': error: failed to start SSH connection to 'example.org': Host key verification failed.
    Failed to find a machine for remote build!
    [...]

...and now it's clear what's wrong.

Please note that this is won't end up in the derivation's log.

For previous discussion about this change see
https://github.com/NixOS/nix/pull/7659.

Change-Id: I5790856dbf58e53ea3e63238b015ea06c347cf92
2024-04-26 19:04:06 +02:00
Artemis Tosini c03de0df62 gc: Find roots using libproc on Darwin
Previously, the garbage collector found runtime roots on Darwin by
shelling out to `lsof -n -w -F n` then parsing the result.
However, this requires an lsof binary and can be extremely slow.

The official Apple lsof returns in a reasonable amount of time,
about 250ms in my tests, but the lsof packaged in nixpkgs is quite slow,
taking about 40 seconds to run the command.

Using libproc directly is about the same speed as Apple lsof,
and allows us to reënable several tests that were disabled on Darwin.

Change-Id: Ifa0adda7984e13c15535693baba835aae79a3577
2024-04-25 23:24:21 -04:00
Qyriad 7063170d5f tests: add error messages to the asserts in tarball flakes test
In hopes of avoiding opaque error messages like the one in
https://buildbot.lix.systems/#/builders/49/builds/1054/steps/1/logs/stdio

Traceback (most recent call last):
  File "/nix/store/wj6wh89jhd2492r781qsr09r9wydfs6m-nixos-test-driver-1.1/bin/.nixos-test-driver-wrapped", line 9, in <module>
    sys.exit(main())
             ^^^^^^
  File "/nix/store/wj6wh89jhd2492r781qsr09r9wydfs6m-nixos-test-driver-1.1/lib/python3.11/site-packages/test_driver/__init__.py", line 126, in main
    driver.run_tests()
  File "/nix/store/wj6wh89jhd2492r781qsr09r9wydfs6m-nixos-test-driver-1.1/lib/python3.11/site-packages/test_driver/driver.py", line 159, in run_tests
    self.test_script()
  File "/nix/store/wj6wh89jhd2492r781qsr09r9wydfs6m-nixos-test-driver-1.1/lib/python3.11/site-packages/test_driver/driver.py", line 151, in test_script
    exec(self.tests, symbols, None)
  File "<string>", line 13, in <module>
AssertionError

Change-Id: Idd2212a1c3714ce58c7c3a9f34c2ca4313eb6d55
2024-04-22 16:13:36 -06:00
puck 272c2ff15f remove extraneous cache entry from github fetcher
This isn't necessary, as it's already covered by the tarball fetcher's
cache.

Change-Id: I85e35f5a61594f27b8f30d82145f92c5d6559e1f
2024-04-21 10:46:05 +00:00
eldritch horrors a326344253 tests: unhaunt the flakes nixos tests
these should really wait for networks to come up, otherwise they can fail.

fixes #235

Change-Id: I08989e8bdb0de280df74660ac43983de5c34fa9d
2024-04-18 20:09:19 +00:00
Ilya K 6d79aa3d70 Merge "libstore/build: set NO_NEW_PRIVS for the sandbox" into main 2024-04-16 05:33:41 +00:00
Qyriad 4e68deef80 abort with a descriptive message on bad HintFmt usage
Change-Id: Ic2f05572042343a8160fd971394372f5f2706fc4
2024-04-15 23:09:16 +00:00
Ilya K effc28f6f5 libstore/build: set NO_NEW_PRIVS for the sandbox
Change-Id: I711f64e2b68495ed9c85c1a4bd5025405805e43a
2024-04-15 10:25:29 +03:00
Ilya K b469c6509b libstore/build: just copy the magic /etc files into the sandbox
Saves us a bunch of thinking about how to handle symlinks, and prevents
the DNS config from changing on the fly under the build, which may or may
not be a good thing?

Change-Id: I071e6ae7e220884690b788d94f480866f428db71
2024-04-13 12:43:19 +03:00
Théophane Hufschmitt 07b627cc6d Merge pull request #10456 from NixOS/fixpermdeniedbind
Fix adding symlink to the sandbox paths

(cherry-picked from commit da1e977bf48cff2a635034c85e7c13878e38efc2)

Change-Id: I221c85a38180800ec6552d2e86a88df48398fad8
2024-04-11 15:43:58 +03:00
Rebecca Turner 9e7e927837 Print top-level errors normally in nix repl
Previously, errors while printing values in `nix repl` would be printed
in `«error: ...»` brackets rather than displayed normally:

```
nix-repl> legacyPackages.aarch64-darwin.pythonPackages.APScheduler
«error: Package ‘python-2.7.18.7’ in /nix/store/6s0m1qc31zw3l3kq0q4wd5cp3lqpkq0q-source/pkgs/development/interpreters/python/cpython/2.7/default.nix:335 is marked as insecure, refusing to evaluate.»
```

Now, errors will be displayed normally if they're emitted at the
top-level of an expression:

```
nix-repl> legacyPackages.aarch64-darwin.pythonPackages.APScheduler
error:
       … in the condition of the assert statement
         at /nix/store/6s0m1qc31zw3l3kq0q4wd5cp3lqpkq0q-source/lib/customisation.nix:268:17:
          267|     in commonAttrs // {
          268|       drvPath = assert condition; drv.drvPath;
             |                 ^
          269|       outPath = assert condition; drv.outPath;

       … in the left operand of the OR (||) operator
         at /nix/store/6s0m1qc31zw3l3kq0q4wd5cp3lqpkq0q-source/pkgs/development/interpreters/python/passthrufun.nix:28:45:
           27|         if lib.isDerivation value then
           28|           lib.extendDerivation (valid value || throw "${name} should use `buildPythonPackage` or `toPythonModule` if it is to be part of the Python packages set.") {} value
             |                                             ^
           29|         else

       (stack trace truncated; use '--show-trace' to show the full trace)

       error: Package ‘python-2.7.18.7’ in /nix/store/6s0m1qc31zw3l3kq0q4wd5cp3lqpkq0q-source/pkgs/development/interpreters/python/cpython/2.7/default.nix:335 is marked as insecure, refusing to evaluate.
```

Errors emitted in nested structures (like e.g. when printing `nixpkgs`)
will still be printed in brackets.

Change-Id: I25aeddf08c017582718cb9772a677bf51b9fc2ad
2024-04-09 08:34:40 -07:00
Rebecca Turner a95c62673b Merge "Add repl-overlays" into main 2024-04-09 05:29:48 +00:00
Rebecca Turner 727b43478c Add repl-overlays
Adds a `repl-overlays` option, which specifies files that can overlay
and modify the top-level bindings in `nix repl`. For example, with the
following contents in `~/.config/nix/repl.nix`:

    info: final: prev: let
      optionalAttrs = predicate: attrs:
        if predicate
        then attrs
        else {};
    in
      optionalAttrs (prev ? legacyPackages && prev.legacyPackages ? ${info.currentSystem})
      {
        pkgs = prev.legacyPackages.${info.currentSystem};
      }

We can run `nix repl` and use `pkgs` to refer to `legacyPackages.${currentSystem}`:

    $ nix repl --repl-overlays ~/.config/nix/repl.nix nixpkgs
    Lix 2.90.0
    Type :? for help.
    Loading installable 'flake:nixpkgs#'...
    Added 5 variables.
    Loading 'repl-overlays'...
    Added 6 variables.
    nix-repl> pkgs.bash
    «derivation /nix/store/g08b5vkwwh0j8ic9rkmd8mpj878rk62z-bash-5.2p26.drv»

Change-Id: Ic12e0f2f210b2f46e920c33088dfe1083f42391a
2024-04-08 17:11:47 -07:00
jade 54bc1f1b98 "but doctor, I AM the untrusted store": nix doctor had wrong trustedness
This probably snuck in in a refactor using truthiness or so. The
trustedness flag was having the optional fullness checked, rather than
the actual contained trust level.

Also adds some tests.

```
m1@6876551b-255d-4cb0-af02-8a4f17b27e2e ~ % nix store ping
warning: 'nix store ping' is a deprecated alias for 'nix store info'
Store URL: daemon
Version: 2.20.4
Trusted: 0
m1@6876551b-255d-4cb0-af02-8a4f17b27e2e ~ % nix doctor
warning: 'doctor' is a deprecated alias for 'config check'
[PASS] PATH contains only one nix version.
[PASS] All profiles are gcroots.
[PASS] Client protocol matches store protocol.
[INFO] You are trusted by store uri: daemon
```

Fixes: lix-project/lix#232
Change-Id: I21576e2a0a755036edf8814133345987617ba3d0
2024-04-08 15:40:12 -07:00
Rebecca Turner 5ec256625e Merge "Don't run libstore unit tests in project root" into main 2024-04-08 22:08:34 +00:00
Rebecca Turner 12f2565f91 Don't run libstore unit tests in project root
This keeps the libstore unit tests from writing
`libstore-unit-tests.xml` to the project root.

Change-Id: I0d9909aabf9f3574cc1e72a5ae81daefba9a394b
2024-04-08 12:43:35 -07:00
Rebecca Turner 4a49a497eb Fix REPL test parser nits
Follow-up to https://gerrit.lix.systems/c/lix/+/546

Change-Id: Ie603f01e5520329bf879e061cea9e3fba45213fd
2024-04-08 11:14:34 -07:00
Rebecca Turner 4600eabdae Merge "Rename some parse failure tests to parse-fail-*" into main 2024-04-08 06:33:51 +00:00
Rebecca Turner 8ed8b9aef0 Merge "Add PathsSetting" into main 2024-04-08 06:31:11 +00:00
Robert Hensing b995c17f0e Merge pull request #10208 from 9999years/print-strings-directly
`:print` strings directly in `nix repl`

(cherry picked from commit 3539172fd2f7cee639ce46423c58beca4231f2db)
Change-Id: I1972f3bf3b56312851f38288509d371d37f21677
Upstream-PR: https://github.com/NixOS/nix/pull/10208
2024-04-07 19:10:43 -07:00
Rebecca Turner 6f863e8ccd Add PathsSetting
Change-Id: I1165f6ef033a5f757ca3716d3f8008ba36b01fd0
2024-04-07 18:22:15 -07:00
Rebecca Turner 06e11778b5 Merge "Rewrite REPL test parser" into main 2024-04-06 21:36:26 +00:00
Qyriad 4e11b0d04d Merge "meson: add missing tests: ca, dyn-drv, plugins, libstoreconsumer" into main 2024-04-06 01:05:09 +00:00
eldritch horrors e9e1b6963c Merge changes I1fa30114,I3ca208b6,Ide4c6e00,I74c46b9f,I05fa6a9d, ... into main
* changes:
  Revert "libutil: drop Pool resources on exceptional free"
  Revert "libutil: remove Pool::Handle::bad"
  Revert "libstore: remove one Resource::good flag"
  Revert "libstore: using throwing finally in withFramedSink"
  Revert "libutil: allow graceful dropping of Pool::Handle"
  Revert "libutil: drop Fs{Source,Sink}::good"
  libutil: guard Finally against invalid exception throws
2024-04-05 23:17:18 +00:00
Qyriad 405e41e288 Merge "meson: run repl characterization test" into main 2024-04-05 20:57:42 +00:00
Rebecca Turner ee423f391d Rewrite REPL test parser
- Use a recursive descent parser so that it's easy to extend.
- Add `@args` to enable customizing command-line arguments
- Add `@should-start` to enable `nix repl` tests that error before
  entering the REPL
- Make sure to read all stdout output before comparing. This catches
  some extra output we were tossing out before!

Change-Id: I5522555df4c313024ab15cd10f9f04e7293bda3a
2024-04-05 13:14:21 -07:00
eldritch horrors 38dc6f5b69 Revert "libutil: drop Pool resources on exceptional free"
This reverts commit de2884b82b376d10de5c400d8e73bc7d98f195d2.

Change-Id: I1fa301149d7c2ed3d266a40c15b2d010e12e44e6
2024-04-05 20:13:02 +00:00
Qyriad 07e1ddc23d meson: add missing tests: ca, dyn-drv, plugins, libstoreconsumer
Change-Id: I6a74ebaf93697cb99aadd6b51538c2766b0a808a
2024-04-04 20:43:38 -06:00
Rebecca Turner 0fec7d2db6 Rename some parse failure tests to parse-fail-*
These were mistakenly labeled `eval-fail-*`.

Note that the `lang.sh` runner passes `parse-fail-*` tests on stdin, so
filenames are removed from error messages.

Change-Id: I7f3a0d78b6cfa87af29aaa1b7af19d5a57fd4ade
2024-04-04 15:49:30 -07:00
Qyriad 3f4c7a68f4 meson: run repl characterization test
This was mistakenly left out of 69c3363f2.

Fixes #205.

Change-Id: Ib9a2088c9eee3a192623bee107ba32221d048640
2024-04-03 17:05:30 -06:00
Rebecca Turner 84018e1264 Make repl_characterization.cc constants string_views
Change-Id: I96455ee365799ae87d9ab433cf102c691616a45e
2024-04-03 16:25:54 +00:00
Rebecca Turner ea10fe7ab0 Add EscapeStringOptions and escapeString tests
Change-Id: I86ead2f969c9e03c9edfa51bbc92ee06393fd7d6
2024-04-03 16:25:54 +00:00