lix/scripts/install-multi-user.sh

711 lines
20 KiB
Bash
Raw Normal View History

#!/usr/bin/env bash
set -eu
set -o pipefail
# Sourced from:
# - https://github.com/LnL7/nix-darwin/blob/8c29d0985d74b4a990238497c47a2542a5616b3c/bootstrap.sh
# - https://gist.github.com/expipiplus1/e571ce88c608a1e83547c918591b149f/ac504c6c1b96e65505fbda437a28ce563408ecb0
# - https://github.com/NixOS/nixos-org-configurations/blob/a122f418797713d519aadf02e677fce0dc1cb446/delft/scripts/nix-mac-installer.sh
# - https://github.com/matthewbauer/macNixOS/blob/f6045394f9153edea417be90c216788e754feaba/install-macNixOS.sh
# - https://gist.github.com/LnL7/9717bd6cdcb30b086fd7f2093e5f8494/86b26f852ce563e973acd30f796a9a416248c34a
#
# however tracking which bits came from which would be impossible.
readonly ESC='\033[0m'
installer: Fix terminal colors. The install-multi-user script uses blue, green, and red colors, as well as bold and underline, to add helpful formatting that helps structure its rather voluminous output. Unfortunately, the terminal escape sequences it uses are not quite well-formed. The relevant information is all there, just obscured by some extra noise, a leading parameter `38`. Empirically, the result is: * On macOS, in both Terminal.app and iTerm2, the spurious `38` is ignored, the rest of the escape sequence is applied, and the colors show up as intended. * On Linux, in at least gnome-terminal and xterm, the spurious `38` and the next parameter after it are ignored, and what's left is applied. So in the sequence `38;4;32`, the 4 (underline) is ignored but the 32 (green) takes effect; in a more typical sequence like `38;34`, the 34 (blue) is ignored and nothing happens. These codes are all unchanged since this script's origins as a Darwin-only script -- so the fact that they work fine in common macOS terminals goes some way to explain how the bug arose. Happily, we can make the colors work as intended by just deleting the extra `38;`. Tested in all four terminals mentioned above; the new codes work correctly on all of them, and on the two macOS terminals they work exactly the same as before. --- In a bit more technical detail -- perhaps more than anyone, me included, ever wanted to know, but now that I've gone and learned it I'll write it down anyway :) -- here's what's happening in these codes: An ECMA-48 "control sequence" begins with `\033[` aka "CSI", contains any number of parameters as semicolon-separated decimal numbers (plus sometimes other wrinkles), and ends with a byte from 0x40..0x7e. In our case, with `m` aka "SGR", "Select Graphic Rendition". An SGR control sequence `\033[...m` sets colors, fonts, text styles, etc. In particular a parameter `31` means red, `32` green, `34` blue, `4` underline, and `0` means reset to normal. Those are all we use. There is also a `38`. This is used for setting colors too... but it needs arguments. `38;5;nn` is color nn from a 256-color palette, and `38;2;rr;gg;bb` has the given RGB values. There is no meaning defined for `38;1` or `38;34` etc. On seeing a parameter `38` followed by an unrecognized argument for it, apparently some implementations (as seen on macOS) discard only the `38` and others (as seen on Linux) discard the argument too before resuming.
2020-03-25 04:15:01 +00:00
readonly BOLD='\033[1m'
readonly BLUE='\033[34m'
readonly BLUE_UL='\033[4;34m'
readonly GREEN='\033[32m'
readonly GREEN_UL='\033[4;32m'
readonly RED='\033[31m'
# installer allows overriding build user count to speed up installation
# as creating each user takes non-trivial amount of time on macos
readonly NIX_USER_COUNT=${NIX_USER_COUNT:-32}
readonly NIX_BUILD_GROUP_ID="30000"
readonly NIX_BUILD_GROUP_NAME="nixbld"
2021-02-07 21:34:24 +00:00
# darwin installer needs to override these
NIX_FIRST_BUILD_UID="30001"
NIX_BUILD_USER_NAME_TEMPLATE="nixbld%d"
# Please don't change this. We don't support it, because the
# default shell profile that comes with Nix doesn't support it.
readonly NIX_ROOT="/nix"
readonly NIX_EXTRA_CONF=${NIX_EXTRA_CONF:-}
2021-03-23 15:23:24 +00:00
readonly PROFILE_TARGETS=("/etc/bashrc" "/etc/profile.d/nix.sh" "/etc/zshenv" "/etc/bash.bashrc" "/etc/zsh/zshenv")
readonly PROFILE_BACKUP_SUFFIX=".backup-before-nix"
readonly PROFILE_NIX_FILE="$NIX_ROOT/var/nix/profiles/default/etc/profile.d/nix-daemon.sh"
readonly NIX_INSTALLED_NIX="@nix@"
readonly NIX_INSTALLED_CACERT="@cacert@"
#readonly NIX_INSTALLED_NIX="/nix/store/j8dbv5w6jl34caywh2ygdy88knx1mdf7-nix-2.3.6"
#readonly NIX_INSTALLED_CACERT="/nix/store/7dxhzymvy330i28ii676fl1pqwcahv2f-nss-cacert-3.49.2"
readonly EXTRACTED_NIX_PATH="$(dirname "$0")"
readonly ROOT_HOME=$(echo ~root)
if [ -t 0 ]; then
readonly IS_HEADLESS='no'
else
readonly IS_HEADLESS='yes'
fi
headless() {
if [ "$IS_HEADLESS" = "yes" ]; then
return 0
else
return 1
fi
}
contactme() {
echo "We'd love to help if you need it."
echo ""
echo "If you can, open an issue at https://github.com/nixos/nix/issues"
echo ""
echo "Or feel free to contact the team,"
echo " - on IRC #nixos on irc.freenode.net"
echo " - on twitter @nixos_org"
}
uninstall_directions() {
subheader "Uninstalling nix:"
local step=0
if poly_service_installed_check; then
step=$((step + 1))
poly_service_uninstall_directions "$step"
fi
for profile_target in "${PROFILE_TARGETS[@]}"; do
if [ -e "$profile_target" ] && [ -e "$profile_target$PROFILE_BACKUP_SUFFIX" ]; then
step=$((step + 1))
cat <<EOF
$step. Restore $profile_target$PROFILE_BACKUP_SUFFIX back to $profile_target
sudo mv $profile_target$PROFILE_BACKUP_SUFFIX $profile_target
(after this one, you may need to re-open any terminals that were
opened while it existed.)
EOF
fi
done
step=$((step + 1))
cat <<EOF
$step. Delete the files Nix added to your system:
sudo rm -rf /etc/nix $NIX_ROOT $ROOT_HOME/.nix-profile $ROOT_HOME/.nix-defexpr $ROOT_HOME/.nix-channels $HOME/.nix-profile $HOME/.nix-defexpr $HOME/.nix-channels
and that is it.
EOF
}
nix_user_for_core() {
2021-02-07 21:34:24 +00:00
printf "$NIX_BUILD_USER_NAME_TEMPLATE" "$1"
}
nix_uid_for_core() {
echo $((NIX_FIRST_BUILD_UID + $1 - 1))
}
_textout() {
echo -en "$1"
shift
if [ "$*" = "" ]; then
cat
else
echo "$@"
fi
echo -en "$ESC"
}
header() {
follow="---------------------------------------------------------"
header=$(echo "---- $* $follow$follow$follow" | head -c 80)
echo ""
_textout "$BLUE" "$header"
}
warningheader() {
follow="---------------------------------------------------------"
header=$(echo "---- $* $follow$follow$follow" | head -c 80)
echo ""
_textout "$RED" "$header"
}
subheader() {
echo ""
_textout "$BLUE_UL" "$*"
}
row() {
printf "$BOLD%s$ESC:\\t%s\\n" "$1" "$2"
}
task() {
echo ""
ok "~~> $1"
}
bold() {
echo "$BOLD$*$ESC"
}
ok() {
_textout "$GREEN" "$@"
}
warning() {
warningheader "warning!"
cat
echo ""
}
failure() {
header "oh no!"
_textout "$RED" "$@"
echo ""
_textout "$RED" "$(contactme)"
trap finish_cleanup EXIT
exit 1
}
ui_confirm() {
_textout "$GREEN$GREEN_UL" "$1"
if headless; then
echo "No TTY, assuming you would say yes :)"
return 0
fi
local prompt="[y/n] "
echo -n "$prompt"
while read -r y; do
if [ "$y" = "y" ]; then
echo ""
return 0
elif [ "$y" = "n" ]; then
echo ""
return 1
else
_textout "$RED" "Sorry, I didn't understand. I can only understand answers of y or n"
echo -n "$prompt"
fi
done
echo ""
return 1
}
__sudo() {
local expl="$1"
local cmd="$2"
shift
header "sudo execution"
echo "I am executing:"
echo ""
printf " $ sudo %s\\n" "$cmd"
echo ""
echo "$expl"
echo ""
return 0
}
_sudo() {
local expl="$1"
shift
if ! headless; then
__sudo "$expl" "$*"
fi
sudo "$@"
}
readonly SCRATCH=$(mktemp -d -t tmp.XXXXXXXXXX)
function finish_cleanup {
rm -rf "$SCRATCH"
}
function finish_fail {
finish_cleanup
failure <<EOF
Jeeze, something went wrong. If you can take all the output and open
an issue, we'd love to fix the problem so nobody else has this issue.
:(
EOF
}
trap finish_fail EXIT
channel_update_failed=0
function finish_success {
finish_cleanup
ok "Alright! We're done!"
if [ "x$channel_update_failed" = x1 ]; then
echo ""
echo "But fetching the nixpkgs channel failed. (Are you offline?)"
echo "To try again later, run \"sudo -i nix-channel --update nixpkgs\"."
fi
cat <<EOF
Before Nix will work in your existing shells, you'll need to close
them and open them again. Other than that, you should be ready to go.
Try it! Open a new terminal, and type:
$(poly_extra_try_me_commands)
$ nix-shell -p nix-info --run "nix-info -m"
$(poly_extra_setup_instructions)
Thank you for using this installer. If you have any feedback, don't
hesitate:
$(contactme)
EOF
}
validate_starting_assumptions() {
poly_validate_assumptions
if [ $EUID -eq 0 ]; then
failure <<EOF
Please do not run this script with root privileges. We will call sudo
when we need to.
EOF
fi
if type nix-env 2> /dev/null >&2; then
warning <<EOF
Nix already appears to be installed. This installer may run into issues.
If an error occurs, try manually uninstalling, then rerunning this script.
$(uninstall_directions)
EOF
fi
for profile_target in "${PROFILE_TARGETS[@]}"; do
if [ -e "$profile_target$PROFILE_BACKUP_SUFFIX" ]; then
failure <<EOF
When this script runs, it backs up the current $profile_target to
$profile_target$PROFILE_BACKUP_SUFFIX. This backup file already exists, though.
Please follow these instructions to clean up the old backup file:
1. Copy $profile_target and $profile_target$PROFILE_BACKUP_SUFFIX to another place, just
in case.
2. Take care to make sure that $profile_target$PROFILE_BACKUP_SUFFIX doesn't look like
it has anything nix-related in it. If it does, something is probably
quite wrong. Please open an issue or get in touch immediately.
EOF
fi
done
}
setup_report() {
header "Nix config report"
row " Temp Dir" "$SCRATCH"
row " Nix Root" "$NIX_ROOT"
row " Build Users" "$NIX_USER_COUNT"
row " Build Group ID" "$NIX_BUILD_GROUP_ID"
row "Build Group Name" "$NIX_BUILD_GROUP_NAME"
if [ "${ALLOW_PREEXISTING_INSTALLATION:-}" != "" ]; then
row "Preexisting Install" "Allowed"
fi
subheader "build users:"
row " Username" "UID"
for i in $(seq 1 "$NIX_USER_COUNT"); do
row " $(nix_user_for_core "$i")" "$(nix_uid_for_core "$i")"
done
echo ""
}
create_build_group() {
local primary_group_id
task "Setting up the build group $NIX_BUILD_GROUP_NAME"
if ! poly_group_exists "$NIX_BUILD_GROUP_NAME"; then
poly_create_build_group
row " Created" "Yes"
else
primary_group_id=$(poly_group_id_get "$NIX_BUILD_GROUP_NAME")
if [ "$primary_group_id" -ne "$NIX_BUILD_GROUP_ID" ]; then
failure <<EOF
It seems the build group $NIX_BUILD_GROUP_NAME already exists, but
with the UID $primary_group_id. This script can't really handle
that right now, so I'm going to give up.
You can fix this by editing this script and changing the
NIX_BUILD_GROUP_ID variable near the top to from $NIX_BUILD_GROUP_ID
to $primary_group_id and re-run.
EOF
else
row " Exists" "Yes"
fi
fi
}
create_build_user_for_core() {
local coreid
local username
local uid
coreid="$1"
username=$(nix_user_for_core "$coreid")
uid=$(nix_uid_for_core "$coreid")
task "Setting up the build user $username"
if ! poly_user_exists "$username"; then
poly_create_build_user "$username" "$uid" "$coreid"
row " Created" "Yes"
else
actual_uid=$(poly_user_id_get "$username")
if [ "$actual_uid" != "$uid" ]; then
failure <<EOF
It seems the build user $username already exists, but with the UID
with the UID '$actual_uid'. This script can't really handle that right
now, so I'm going to give up.
If you already created the users and you know they start from
$actual_uid and go up from there, you can edit this script and change
NIX_FIRST_BUILD_UID near the top of the file to $actual_uid and try
again.
EOF
else
row " Exists" "Yes"
fi
fi
if [ "$(poly_user_hidden_get "$username")" = "1" ]; then
row " Hidden" "Yes"
else
poly_user_hidden_set "$username"
row " Hidden" "Yes"
fi
if [ "$(poly_user_home_get "$username")" = "/var/empty" ]; then
row " Home Directory" "/var/empty"
else
poly_user_home_set "$username" "/var/empty"
row " Home Directory" "/var/empty"
fi
# We use grep instead of an equality check because it is difficult
# to extract _just_ the user's note, instead it is prefixed with
# some plist junk. This was causing the user note to always be set,
# even if there was no reason for it.
if ! poly_user_note_get "$username" | grep -q "Nix build user $coreid"; then
row " Note" "Nix build user $coreid"
else
poly_user_note_set "$username" "Nix build user $coreid"
row " Note" "Nix build user $coreid"
fi
if [ "$(poly_user_shell_get "$username")" = "/sbin/nologin" ]; then
row " Logins Disabled" "Yes"
else
poly_user_shell_set "$username" "/sbin/nologin"
row " Logins Disabled" "Yes"
fi
if poly_user_in_group_check "$username" "$NIX_BUILD_GROUP_NAME"; then
row " Member of $NIX_BUILD_GROUP_NAME" "Yes"
else
poly_user_in_group_set "$username" "$NIX_BUILD_GROUP_NAME"
row " Member of $NIX_BUILD_GROUP_NAME" "Yes"
fi
if [ "$(poly_user_primary_group_get "$username")" = "$NIX_BUILD_GROUP_ID" ]; then
row " PrimaryGroupID" "$NIX_BUILD_GROUP_ID"
else
poly_user_primary_group_set "$username" "$NIX_BUILD_GROUP_ID"
row " PrimaryGroupID" "$NIX_BUILD_GROUP_ID"
fi
}
create_build_users() {
for i in $(seq 1 "$NIX_USER_COUNT"); do
create_build_user_for_core "$i"
done
}
create_directories() {
# FIXME: remove all of this because it duplicates LocalStore::LocalStore().
_sudo "to make the basic directory structure of Nix (part 1)" \
mkdir -pv -m 0755 /nix /nix/var /nix/var/log /nix/var/log/nix /nix/var/log/nix/drvs /nix/var/nix{,/db,/gcroots,/profiles,/temproots,/userpool} /nix/var/nix/{gcroots,profiles}/per-user
_sudo "to make the basic directory structure of Nix (part 2)" \
mkdir -pv -m 1775 /nix/store
_sudo "to make the basic directory structure of Nix (part 3)" \
chgrp "$NIX_BUILD_GROUP_NAME" /nix/store
_sudo "to place the default nix daemon configuration (part 1)" \
mkdir -pv -m 0555 /etc/nix
}
place_channel_configuration() {
2020-05-26 14:23:03 +00:00
if [ -z "${NIX_INSTALLER_NO_CHANNEL_ADD:-}" ]; then
echo "https://nixos.org/channels/nixpkgs-unstable nixpkgs" > "$SCRATCH/.nix-channels"
_sudo "to set up the default system channel (part 1)" \
install -m 0664 "$SCRATCH/.nix-channels" "$ROOT_HOME/.nix-channels"
fi
}
welcome_to_nix() {
ok "Welcome to the Multi-User Nix Installation"
cat <<EOF
This installation tool will set up your computer with the Nix package
manager. This will happen in a few stages:
1. Make sure your computer doesn't already have Nix. If it does, I
will show you instructions on how to clean up your old one.
2. Show you what we are going to install and where. Then we will ask
if you are ready to continue.
3. Create the system users and groups that the Nix daemon uses to run
builds.
4. Perform the basic installation of the Nix files daemon.
5. Configure your shell to import special Nix Profile files, so you
can use Nix.
6. Start the Nix daemon.
EOF
if ui_confirm "Would you like to see a more detailed list of what we will do?"; then
cat <<EOF
We will:
- make sure your computer doesn't already have Nix files
2019-10-09 19:04:21 +00:00
(if it does, I will tell you how to clean them up.)
- create local users (see the list above for the users we'll make)
- create a local group ($NIX_BUILD_GROUP_NAME)
- install Nix in to $NIX_ROOT
- create a configuration file in /etc/nix
- set up the "default profile" by creating some Nix-related files in
$ROOT_HOME
EOF
for profile_target in "${PROFILE_TARGETS[@]}"; do
if [ -e "$profile_target" ]; then
cat <<EOF
- back up $profile_target to $profile_target$PROFILE_BACKUP_SUFFIX
- update $profile_target to include some Nix configuration
EOF
fi
done
poly_service_setup_note
if ! ui_confirm "Ready to continue?"; then
failure <<EOF
Okay, maybe you would like to talk to the team.
EOF
fi
fi
}
chat_about_sudo() {
header "let's talk about sudo"
if headless; then
cat <<EOF
This script is going to call sudo a lot. Normally, it would show you
exactly what commands it is running and why. However, the script is
run in a headless fashion, like this:
$ curl -L https://nixos.org/nix/install | sh
or maybe in a CI pipeline. Because of that, we're going to skip the
verbose output in the interest of brevity.
If you would like to
see the output, try like this:
$ curl -L -o install-nix https://nixos.org/nix/install
$ sh ./install-nix
EOF
return 0
fi
cat <<EOF
This script is going to call sudo a lot. Every time we do, it'll
output exactly what it'll do, and why.
Just like this:
EOF
__sudo "to demonstrate how our sudo prompts look" \
echo "this is a sudo prompt"
cat <<EOF
This might look scary, but everything can be undone by running just a
few commands. We used to ask you to confirm each time sudo ran, but it
was too many times. Instead, I'll just ask you this one time:
EOF
if ui_confirm "Can we use sudo?"; then
ok "Yay! Thanks! Let's get going!"
else
failure <<EOF
That is okay, but we can't install.
EOF
fi
}
install_from_extracted_nix() {
(
cd "$EXTRACTED_NIX_PATH"
_sudo "to copy the basic Nix files to the new store at $NIX_ROOT/store" \
rsync -rlpt --chmod=-w ./store/* "$NIX_ROOT/store/"
if [ -d "$NIX_INSTALLED_NIX" ]; then
echo " Alright! We have our first nix at $NIX_INSTALLED_NIX"
else
failure <<EOF
Something went wrong, and I didn't find Nix installed at
$NIX_INSTALLED_NIX.
EOF
fi
cat ./.reginfo \
| _sudo "to load data for the first time in to the Nix Database" \
"$NIX_INSTALLED_NIX/bin/nix-store" --load-db
echo " Just finished getting the nix database ready."
)
}
shell_source_lines() {
cat <<EOF
# Nix
if [ -e '$PROFILE_NIX_FILE' ]; then
. '$PROFILE_NIX_FILE'
fi
# End Nix
EOF
}
configure_shell_profile() {
for profile_target in "${PROFILE_TARGETS[@]}"; do
if [ -e "$profile_target" ]; then
_sudo "to back up your current $profile_target to $profile_target$PROFILE_BACKUP_SUFFIX" \
cp "$profile_target" "$profile_target$PROFILE_BACKUP_SUFFIX"
else
# try to create the file if its directory exists
target_dir="$(dirname "$profile_target")"
if [ -d "$target_dir" ]; then
_sudo "to create a stub $profile_target which will be updated" \
touch "$profile_target"
fi
fi
if [ -e "$profile_target" ]; then
shell_source_lines \
| _sudo "extend your $profile_target with nix-daemon settings" \
tee -a "$profile_target"
fi
done
}
setup_default_profile() {
_sudo "to installing a bootstrapping Nix in to the default Profile" \
HOME="$ROOT_HOME" "$NIX_INSTALLED_NIX/bin/nix-env" -i "$NIX_INSTALLED_NIX"
if [ -z "${NIX_SSL_CERT_FILE:-}" ] || ! [ -f "${NIX_SSL_CERT_FILE:-}" ]; then
_sudo "to installing a bootstrapping SSL certificate just for Nix in to the default Profile" \
HOME="$ROOT_HOME" "$NIX_INSTALLED_NIX/bin/nix-env" -i "$NIX_INSTALLED_CACERT"
export NIX_SSL_CERT_FILE=/nix/var/nix/profiles/default/etc/ssl/certs/ca-bundle.crt
fi
2020-05-26 14:23:03 +00:00
if [ -z "${NIX_INSTALLER_NO_CHANNEL_ADD:-}" ]; then
# Have to explicitly pass NIX_SSL_CERT_FILE as part of the sudo call,
# otherwise it will be lost in environments where sudo doesn't pass
# all the environment variables by default.
_sudo "to update the default channel in the default profile" \
HOME="$ROOT_HOME" NIX_SSL_CERT_FILE="$NIX_SSL_CERT_FILE" "$NIX_INSTALLED_NIX/bin/nix-channel" --update nixpkgs \
|| channel_update_failed=1
fi
}
place_nix_configuration() {
cat <<EOF > "$SCRATCH/nix.conf"
$NIX_EXTRA_CONF
build-users-group = $NIX_BUILD_GROUP_NAME
EOF
_sudo "to place the default nix daemon configuration (part 2)" \
install -m 0664 "$SCRATCH/nix.conf" /etc/nix/nix.conf
}
main() {
if [ "$(uname -s)" = "Darwin" ]; then
# shellcheck source=./install-darwin-multi-user.sh
. "$EXTRACTED_NIX_PATH/install-darwin-multi-user.sh"
elif [ "$(uname -s)" = "Linux" ]; then
# shellcheck source=./install-systemd-multi-user.sh
. "$EXTRACTED_NIX_PATH/install-systemd-multi-user.sh" # most of this works on non-systemd distros also
else
failure "Sorry, I don't know what to do on $(uname)"
fi
welcome_to_nix
chat_about_sudo
validate_starting_assumptions
setup_report
if ! ui_confirm "Ready to continue?"; then
ok "Alright, no changes have been made :)"
contactme
trap finish_cleanup EXIT
exit 1
fi
create_build_group
create_build_users
create_directories
place_channel_configuration
install_from_extracted_nix
configure_shell_profile
set +eu
. /etc/profile
set -eu
setup_default_profile
place_nix_configuration
poly_configure_nix_daemon_service
trap finish_success EXIT
}
main