<section xmlns="http://docbook.org/ns/docbook" xmlns:xlink="http://www.w3.org/1999/xlink" xml:id='ssec-builtins'> <title>Built-in functions</title> <para>This section lists the functions and constants built into the Nix expression evaluator. (The built-in function <function>derivation</function> is discussed above.) Some built-ins, such as <function>derivation</function>, are always in scope of every Nix expression; you can just access them right away. But to prevent polluting the namespace too much, most built-ins are not in scope. Instead, you can access them through the <varname>builtins</varname> built-in value, which is an attribute set that contains all built-in functions and values. For instance, <function>derivation</function> is also available as <function>builtins.derivation</function>.</para> <variablelist> <varlistentry><term><function>abort</function> <replaceable>s</replaceable></term> <listitem><para>Abort Nix expression evaluation, print error message <replaceable>s</replaceable>.</para></listitem> </varlistentry> <varlistentry><term><function>builtins.add</function> <replaceable>e1</replaceable> <replaceable>e2</replaceable></term> <listitem><para>Return the sum of the integers <replaceable>e1</replaceable> and <replaceable>e2</replaceable>.</para></listitem> </varlistentry> <varlistentry><term><function>builtins.attrNames</function> <replaceable>attrs</replaceable></term> <listitem><para>Return the names of the attributes in the attribute set <replaceable>attrs</replaceable> in a sorted list. For instance, <literal>builtins.attrNames {y = 1; x = "foo";}</literal> evaluates to <literal>["x" "y"]</literal>. There is no built-in function <function>attrValues</function>, but you can easily define it yourself: <programlisting> attrValues = attrs: map (name: builtins.getAttr name attrs) (builtins.attrNames attrs);</programlisting> </para></listitem> </varlistentry> <varlistentry><term><function>baseNameOf</function> <replaceable>s</replaceable></term> <listitem><para>Return the <emphasis>base name</emphasis> of the string <replaceable>s</replaceable>, that is, everything following the final slash in the string. This is similar to the GNU <command>basename</command> command.</para></listitem> </varlistentry> <varlistentry><term><varname>builtins</varname></term> <listitem><para>The attribute set <varname>builtins</varname> contains all the built-in functions and values. You can use <varname>builtins</varname> to test for the availability of features in the Nix installation, e.g., <programlisting> if builtins ? getEnv then builtins.getEnv "PATH" else ""</programlisting> This allows a Nix expression to fall back gracefully on older Nix installations that don’t have the desired built-in function.</para></listitem> </varlistentry> <varlistentry><term><function>builtins.compareVersions</function> <replaceable>s1</replaceable> <replaceable>s2</replaceable></term> <listitem><para>Compare two strings representing versions and return <literal>-1</literal> if version <replaceable>s1</replaceable> is older than version <replaceable>s2</replaceable>, <literal>0</literal> if they are the same, and <literal>1</literal> if <replaceable>s1</replaceable> is newer than <replaceable>s2</replaceable>. The version comparison algorithm is the same as the one used by <link linkend="ssec-version-comparisons"><command>nix-env -u</command></link>.</para></listitem> </varlistentry> <varlistentry xml:id='builtin-currentSystem'><term><varname>builtins.currentSystem</varname></term> <listitem><para>The built-in value <varname>currentSystem</varname> evaluates to the Nix platform identifier for the Nix installation on which the expression is being evaluated, such as <literal>"i686-linux"</literal> or <literal>"powerpc-darwin"</literal>.</para></listitem> </varlistentry> <!-- <varlistentry><term><function>currentTime</function></term> <listitem><para>The built-in value <varname>currentTime</varname> returns the current system time in seconds since 00:00:00 1/1/1970 UTC. Due to the evaluation model of Nix expressions (<emphasis>maximal laziness</emphasis>), it always yields the same value within an execution of Nix.</para></listitem> </varlistentry> --> <!-- <varlistentry><term><function>dependencyClosure</function></term> <listitem><para>TODO</para></listitem> </varlistentry> --> <varlistentry><term><function>derivation</function> <replaceable>attrs</replaceable></term> <listitem><para><function>derivation</function> is described in <xref linkend='ssec-derivation' />.</para></listitem> </varlistentry> <varlistentry><term><function>dirOf</function> <replaceable>s</replaceable></term> <listitem><para>Return the directory part of the string <replaceable>s</replaceable>, that is, everything before the final slash in the string. This is similar to the GNU <command>dirname</command> command.</para></listitem> </varlistentry> <varlistentry><term><function>builtins.div</function> <replaceable>e1</replaceable> <replaceable>e2</replaceable></term> <listitem><para>Return the quotient of the integers <replaceable>e1</replaceable> and <replaceable>e2</replaceable>.</para></listitem> </varlistentry> <varlistentry><term><function>builtins.filterSource</function> <replaceable>e1</replaceable> <replaceable>e2</replaceable></term> <listitem> <para>This function allows you to copy sources into the Nix store while filtering certain files. For instance, suppose that you want to use the directory <filename>source-dir</filename> as an input to a Nix expression, e.g. <programlisting> stdenv.mkDerivation { ... src = ./source-dir; } </programlisting> However, if <filename>source-dir</filename> is a Subversion working copy, then all those annoying <filename>.svn</filename> subdirectories will also be copied to the store. Worse, the contents of those directories may change a lot, causing lots of spurious rebuilds. With <function>filterSource</function> you can filter out the <filename>.svn</filename> directories: <programlisting> src = builtins.filterSource (path: type: type != "directory" || baseNameOf path != ".svn") ./source-dir; </programlisting> </para> <para>Thus, the first argument <replaceable>e1</replaceable> must be a predicate function that is called for each regular file, directory or symlink in the source tree <replaceable>e2</replaceable>. If the function returns <literal>true</literal>, the file is copied to the Nix store, otherwise it is omitted. The function is called with two arguments. The first is the full path of the file. The second is a string that identifies the type of the file, which is either <literal>"regular"</literal>, <literal>"directory"</literal>, <literal>"symlink"</literal> or <literal>"unknown"</literal> (for other kinds of files such as device nodes or fifos — but note that those cannot be copied to the Nix store, so if the predicate returns <literal>true</literal> for them, the copy will fail).</para> </listitem> </varlistentry> <varlistentry><term><function>builtins.getAttr</function> <replaceable>s</replaceable> <replaceable>attrs</replaceable></term> <listitem><para><function>getAttr</function> returns the attribute named <replaceable>s</replaceable> from the attribute set <replaceable>attrs</replaceable>. Evaluation aborts if the attribute doesn’t exist. This is a dynamic version of the <literal>.</literal> operator, since <replaceable>s</replaceable> is an expression rather than an identifier.</para></listitem> </varlistentry> <varlistentry><term><function>builtins.getEnv</function> <replaceable>s</replaceable></term> <listitem><para><function>getEnv</function> returns the value of the environment variable <replaceable>s</replaceable>, or an empty string if the variable doesn’t exist. This function should be used with care, as it can introduce all sorts of nasty environment dependencies in your Nix expression.</para> <para><function>getEnv</function> is used in Nix Packages to locate the file <filename>~/.nixpkgs/config.nix</filename>, which contains user-local settings for Nix Packages. (That is, it does a <literal>getEnv "HOME"</literal> to locate the user’s home directory.)</para></listitem> </varlistentry> <varlistentry><term><function>builtins.hasAttr</function> <replaceable>s</replaceable> <replaceable>attrs</replaceable></term> <listitem><para><function>hasAttr</function> returns <literal>true</literal> if the attribute set <replaceable>attrs</replaceable> has an attribute named <replaceable>s</replaceable>, and <literal>false</literal> otherwise. This is a dynamic version of the <literal>?</literal> operator, since <replaceable>s</replaceable> is an expression rather than an identifier.</para></listitem> </varlistentry> <varlistentry><term><function>builtins.head</function> <replaceable>list</replaceable></term> <listitem><para>Return the first element of a list; abort evaluation if the argument isn’t a list or is an empty list. You can test whether a list is empty by comparing it with <literal>[]</literal>.</para></listitem> </varlistentry> <varlistentry><term><function>import</function> <replaceable>path</replaceable></term> <listitem><para>Load, parse and return the Nix expression in the file <replaceable>path</replaceable>. Evaluation aborts if the file doesn’t exist or contains an incorrect Nix expression. <function>import</function> implements Nix’s module system: you can put any Nix expression (such as an attribute set or a function) in a separate file, and use it from Nix expressions in other files.</para> <para>A Nix expression loaded by <function>import</function> must not contain any <emphasis>free variables</emphasis> (identifiers that are not defined in the Nix expression itself and are not built-in). Therefore, it cannot refer to variables that are in scope at the call site. For instance, if you have a calling expression <programlisting> rec { x = 123; y = import ./foo.nix; }</programlisting> then the following <filename>foo.nix</filename> will give an error: <programlisting> x + 456</programlisting> since <varname>x</varname> is not in scope in <filename>foo.nix</filename>. If you want <varname>x</varname> to be available in <filename>foo.nix</filename>, you should pass it as a function argument: <programlisting> rec { x = 123; y = import ./foo.nix x; }</programlisting> and <programlisting> x: x + 456</programlisting> (The function argument doesn’t have to be called <varname>x</varname> in <filename>foo.nix</filename>; any name would work.)</para></listitem> </varlistentry> <varlistentry><term><function>builtins.intersectAttrs</function> <replaceable>e1</replaceable> <replaceable>e2</replaceable></term> <listitem><para>Return an attribute set consisting of the attributes in the set <replaceable>e2</replaceable> that also exist in the set <replaceable>e1</replaceable>.</para></listitem> </varlistentry> <varlistentry><term><function>builtins.isAttrs</function> <replaceable>e</replaceable></term> <listitem><para>Return <literal>true</literal> if <replaceable>e</replaceable> evaluates to an attribute set, and <literal>false</literal> otherwise.</para></listitem> </varlistentry> <varlistentry><term><function>builtins.isList</function> <replaceable>e</replaceable></term> <listitem><para>Return <literal>true</literal> if <replaceable>e</replaceable> evaluates to a list, and <literal>false</literal> otherwise.</para></listitem> </varlistentry> <varlistentry><term><function>builtins.isFunction</function> <replaceable>e</replaceable></term> <listitem><para>Return <literal>true</literal> if <replaceable>e</replaceable> evaluates to a function, and <literal>false</literal> otherwise.</para></listitem> </varlistentry> <varlistentry><term><function>builtins.isString</function> <replaceable>e</replaceable></term> <listitem><para>Return <literal>true</literal> if <replaceable>e</replaceable> evaluates to a string, and <literal>false</literal> otherwise.</para></listitem> </varlistentry> <varlistentry><term><function>builtins.isInt</function> <replaceable>e</replaceable></term> <listitem><para>Return <literal>true</literal> if <replaceable>e</replaceable> evaluates to a int, and <literal>false</literal> otherwise.</para></listitem> </varlistentry> <varlistentry><term><function>builtins.isBool</function> <replaceable>e</replaceable></term> <listitem><para>Return <literal>true</literal> if <replaceable>e</replaceable> evaluates to a bool, and <literal>false</literal> otherwise.</para></listitem> </varlistentry> <varlistentry><term><function>isNull</function> <replaceable>e</replaceable></term> <listitem><para>Return <literal>true</literal> if <replaceable>e</replaceable> evaluates to <literal>null</literal>, and <literal>false</literal> otherwise.</para> <warning><para>This function is <emphasis>deprecated</emphasis>; just write <literal>e == null</literal> instead.</para></warning> </listitem> </varlistentry> <varlistentry><term><function>builtins.length</function> <replaceable>e</replaceable></term> <listitem><para>Return the length of the list <replaceable>e</replaceable>.</para></listitem> </varlistentry> <varlistentry><term><function>builtins.lessThan</function> <replaceable>e1</replaceable> <replaceable>e2</replaceable></term> <listitem><para>Return <literal>true</literal> if the integer <replaceable>e1</replaceable> is less than the integer <replaceable>e2</replaceable>, and <literal>false</literal> otherwise. Evaluation aborts if either <replaceable>e1</replaceable> or <replaceable>e2</replaceable> does not evaluate to an integer.</para></listitem> </varlistentry> <varlistentry><term><function>builtins.listToAttrs</function> <replaceable>e</replaceable></term> <listitem><para>Construct an attribute set from a list specifying the names and values of each attribute. Each element of the list should be an attribute set consisting of a string-valued attribute <varname>name</varname> specifying the name of the attribute, and an attribute <varname>value</varname> specifying its value. Example: <programlisting> builtins.listToAttrs [ {name = "foo"; value = 123;} {name = "bar"; value = 456;} ] </programlisting> evaluates to <programlisting> { foo = 123; bar = 456; } </programlisting> </para></listitem> </varlistentry> <varlistentry><term><function>map</function> <replaceable>f</replaceable> <replaceable>list</replaceable></term> <listitem><para>Apply the function <replaceable>f</replaceable> to each element in the list <replaceable>list</replaceable>. For example, <programlisting> map (x: "foo" + x) ["bar" "bla" "abc"]</programlisting> evaluates to <literal>["foobar" "foobla" "fooabc"]</literal>.</para></listitem> </varlistentry> <varlistentry><term><function>builtins.mul</function> <replaceable>e1</replaceable> <replaceable>e2</replaceable></term> <listitem><para>Return the product of the integers <replaceable>e1</replaceable> and <replaceable>e2</replaceable>.</para></listitem> </varlistentry> <varlistentry><term><function>builtins.parseDrvName</function> <replaceable>s</replaceable></term> <listitem><para>Split the string <replaceable>s</replaceable> into a package name and version. The package name is everything up to but not including the first dash followed by a digit, and the version is everything following that dash. The result is returned in an attribute set <literal>{name, version}</literal>. Thus, <literal>builtins.parseDrvName "nix-0.12pre12876"</literal> returns <literal>{name = "nix"; version = "0.12pre12876";}</literal>.</para></listitem> </varlistentry> <varlistentry><term><function>builtins.pathExists</function> <replaceable>path</replaceable></term> <listitem><para>Return <literal>true</literal> if the path <replaceable>path</replaceable> exists, and <literal>false</literal> otherwise. One application of this function is to conditionally include a Nix expression containing user configuration: <programlisting> let fileName = builtins.getEnv "CONFIG_FILE"; config = if fileName != "" && builtins.pathExists (builtins.toPath fileName) then import (builtins.toPath fileName) else { someSetting = false; }; <lineannotation># default configuration</lineannotation> in config.someSetting</programlisting> (Note that <envar>CONFIG_FILE</envar> must be an absolute path for this to work.)</para></listitem> </varlistentry> <!-- <varlistentry><term><function>relativise</function></term> <listitem><para>TODO</para></listitem> </varlistentry> --> <varlistentry><term><function>builtins.readFile</function> <replaceable>path</replaceable></term> <listitem><para>Return the contents of the file <replaceable>path</replaceable> as a string.</para></listitem> </varlistentry> <varlistentry><term><function>removeAttrs</function> <replaceable>attrs</replaceable> <replaceable>list</replaceable></term> <listitem><para>Remove the attributes listed in <replaceable>list</replaceable> from the attribute set <replaceable>attrs</replaceable>. The attributes don’t have to exist in <replaceable>attrs</replaceable>. For instance, <screen> removeAttrs { x = 1; y = 2; z = 3; } ["a" "x" "z"]</screen> evaluates to <literal>{y = 2;}</literal>.</para></listitem> </varlistentry> <varlistentry><term><function>builtins.stringLength</function> <replaceable>e</replaceable></term> <listitem><para>Return the length of the string <replaceable>e</replaceable>. If <replaceable>e</replaceable> is not a string, evaluation is aborted.</para></listitem> </varlistentry> <varlistentry><term><function>builtins.sub</function> <replaceable>e1</replaceable> <replaceable>e2</replaceable></term> <listitem><para>Return the difference between the integers <replaceable>e1</replaceable> and <replaceable>e2</replaceable>.</para></listitem> </varlistentry> <varlistentry><term><function>builtins.substring</function> <replaceable>start</replaceable> <replaceable>len</replaceable> <replaceable>s</replaceable></term> <listitem><para>Return the substring of <replaceable>s</replaceable> from character position <replaceable>start</replaceable> (zero-based) up to but not including <replaceable>start + len</replaceable>. If <replaceable>start</replaceable> is greater than the length of the string, an empty string is returned, and if <replaceable>start + len</replaceable> lies beyond the end of the string, only the substring up to the end of the string is returned. <replaceable>start</replaceable> must be non-negative.</para></listitem> </varlistentry> <varlistentry><term><function>builtins.tail</function> <replaceable>list</replaceable></term> <listitem><para>Return the second to last elements of a list; abort evaluation if the argument isn’t a list or is an empty list.</para></listitem> </varlistentry> <varlistentry><term><function>throw</function> <replaceable>s</replaceable></term> <listitem><para>Throw an error message <replaceable>s</replaceable>. This usually aborts Nix expression evaluation, but in <command>nix-env -qa</command> and other commands that try to evaluate a set of derivations to get information about those derivations, a derivation that throws an error is silently skipped (which is not the case for <function>abort</function>).</para></listitem> </varlistentry> <varlistentry xml:id='builtin-toFile'><term><function>builtins.toFile</function> <replaceable>name</replaceable> <replaceable>s</replaceable></term> <listitem><para>Store the string <replaceable>s</replaceable> in a file in the Nix store and return its path. The file has suffix <replaceable>name</replaceable>. This file can be used as an input to derivations. One application is to write builders “inline”. For instance, the following Nix expression combines <xref linkend='ex-hello-nix' /> and <xref linkend='ex-hello-builder' /> into one file: <programlisting> {stdenv, fetchurl, perl}: stdenv.mkDerivation { name = "hello-2.1.1"; builder = builtins.toFile "builder.sh" " source $stdenv/setup PATH=$perl/bin:$PATH tar xvfz $src cd hello-* ./configure --prefix=$out make make install "; src = fetchurl { url = http://nix.cs.uu.nl/dist/tarballs/hello-2.1.1.tar.gz; md5 = "70c9ccf9fac07f762c24f2df2290784d"; }; inherit perl; }</programlisting> </para> <para>It is even possible for one file to refer to another, e.g., <programlisting> builder = let configFile = builtins.toFile "foo.conf" " # This is some dummy configuration file. <replaceable>...</replaceable> "; in builtins.toFile "builder.sh" " source $stdenv/setup <replaceable>...</replaceable> cp ${configFile} $out/etc/foo.conf ";</programlisting> Note that <literal>${configFile}</literal> is an antiquotation (see <xref linkend='ssec-values' />), so the result of the expression <literal>configFile</literal> (i.e., a path like <filename>/nix/store/m7p7jfny445k...-foo.conf</filename>) will be spliced into the resulting string.</para> <para>It is however <emphasis>not</emphasis> allowed to have files mutually referring to each other, like so: <programlisting> let foo = builtins.toFile "foo" "...${bar}..."; bar = builtins.toFile "bar" "...${foo}..."; in foo</programlisting> This is not allowed because it would cause a cyclic dependency in the computation of the cryptographic hashes for <varname>foo</varname> and <varname>bar</varname>.</para></listitem> </varlistentry> <varlistentry><term><function>builtins.toPath</function> <replaceable>s</replaceable></term> <listitem><para>Convert the string value <replaceable>s</replaceable> into a path value. The string <replaceable>s</replaceable> must represent an absolute path (i.e., must start with <literal>/</literal>). The path need not exist. The resulting path is canonicalised, e.g., <literal>builtins.toPath "//foo/xyzzy/../bar/"</literal> returns <literal>/foo/bar</literal>.</para></listitem> </varlistentry> <varlistentry><term><function>toString</function> <replaceable>e</replaceable></term> <listitem><para>Convert the expression <replaceable>e</replaceable> to a string. <replaceable>e</replaceable> can be a string (in which case <function>toString</function> is a no-op) or a path (e.g., <literal>toString /foo/bar</literal> yields <literal>"/foo/bar"</literal>.</para></listitem> </varlistentry> <varlistentry xml:id='builtin-toXML'><term><function>builtins.toXML</function> <replaceable>e</replaceable></term> <listitem><para>Return a string containing an XML representation of <replaceable>e</replaceable>. The main application for <function>toXML</function> is to communicate information with the builder in a more structured format than plain environment variables.</para> <!-- TODO: more formally describe the schema of the XML representation --> <para><xref linkend='ex-toxml' /> shows an example where this is the case. The builder is supposed to generate the configuration file for a <link xlink:href='http://jetty.mortbay.org/'>Jetty servlet container</link>. A servlet container contains a number of servlets (<filename>*.war</filename> files) each exported under a specific URI prefix. So the servlet configuration is a list of attribute sets containing the <varname>path</varname> and <varname>war</varname> of the servlet (<xref linkend='ex-toxml-co-servlets' />). This kind of information is difficult to communicate with the normal method of passing information through an environment variable, which just concatenates everything together into a string (which might just work in this case, but wouldn’t work if fields are optional or contain lists themselves). Instead the Nix expression is converted to an XML representation with <function>toXML</function>, which is unambiguous and can easily be processed with the appropriate tools. For instance, in the example an XSLT stylesheet (<xref linkend='ex-toxml-co-stylesheet' />) is applied to it (<xref linkend='ex-toxml-co-apply' />) to generate the XML configuration file for the Jetty server. The XML representation produced from <xref linkend='ex-toxml-co-servlets' /> by <function>toXML</function> is shown in <xref linkend='ex-toxml-result' />.</para> <para>Note that <xref linkend='ex-toxml' /> uses the <function linkend='builtin-toFile'>toFile</function> built-in to write the builder and the stylesheet “inline” in the Nix expression. The path of the stylesheet is spliced into the builder at <literal>xsltproc ${stylesheet} <replaceable>...</replaceable></literal>.</para> <example xml:id='ex-toxml'><title>Passing information to a builder using <function>toXML</function></title> <programlisting><![CDATA[ {stdenv, fetchurl, libxslt, jira, uberwiki}: stdenv.mkDerivation (rec { name = "web-server"; buildInputs = [libxslt]; builder = builtins.toFile "builder.sh" " source $stdenv/setup mkdir $out echo $servlets | xsltproc ${stylesheet} - > $out/server-conf.xml]]> <co xml:id='ex-toxml-co-apply' /> <![CDATA[ "; stylesheet = builtins.toFile "stylesheet.xsl"]]> <co xml:id='ex-toxml-co-stylesheet' /> <![CDATA[ "<?xml version='1.0' encoding='UTF-8'?> <xsl:stylesheet xmlns:xsl='http://www.w3.org/1999/XSL/Transform' version='1.0'> <xsl:template match='/'> <Configure> <xsl:for-each select='/expr/list/attrs'> <Call name='addWebApplication'> <Arg><xsl:value-of select=\"attr[@name = 'path']/string/@value\" /></Arg> <Arg><xsl:value-of select=\"attr[@name = 'war']/path/@value\" /></Arg> </Call> </xsl:for-each> </Configure> </xsl:template> </xsl:stylesheet> "; servlets = builtins.toXML []]> <co xml:id='ex-toxml-co-servlets' /> <![CDATA[ { path = "/bugtracker"; war = jira + "/lib/atlassian-jira.war"; } { path = "/wiki"; war = uberwiki + "/uberwiki.war"; } ]; })]]></programlisting> </example> <example xml:id='ex-toxml-result'><title>XML representation produced by <function>toXML</function></title> <programlisting><![CDATA[<?xml version='1.0' encoding='utf-8'?> <expr> <list> <attrs> <attr name="path"> <string value="/bugtracker" /> </attr> <attr name="war"> <path value="/nix/store/d1jh9pasa7k2...-jira/lib/atlassian-jira.war" /> </attr> </attrs> <attrs> <attr name="path"> <string value="/wiki" /> </attr> <attr name="war"> <path value="/nix/store/y6423b1yi4sx...-uberwiki/uberwiki.war" /> </attr> </attrs> </list> </expr>]]></programlisting> </example> </listitem> </varlistentry> <varlistentry><term><function>builtins.trace</function> <replaceable>e1</replaceable> <replaceable>e2</replaceable></term> <listitem><para>Evaluate <replaceable>e1</replaceable> and print its abstract syntax representation on standard error. Then return <replaceable>e2</replaceable>. This function is useful for debugging.</para></listitem> </varlistentry> </variablelist> </section>