We used to set enforceDeterminism to true in the settings (by default)
and thus did send a non-zero value over the wire. The value should
probably be ignored as it should only matter if nrRounds is non-zero
as well.
Having the old code here where the value is expected to be zero only
works with the same version of Nix where we are sending zero. We
should always test this against older Nix versions being client or
server as otherwise upgrade in larger networks might be a pain.
Fixes 8e0946e8df
These only functioned if a very narrow combination of conditions held:
- The result path does not yet exist (--check did not result in
repeated builds), AND
- The result path is not available from any configured substituters, AND
- No remote builders that can build the path are available.
If any of these do not hold, a derivation would be built 0 or 1 times
regardless of the repeat option. Thus, remove it to avoid confusion.
The old way was not correct.
Here is an example:
```
$ nix-instantiate --eval --expr 'let x = a: throw "asdf"; in x 1' --show-trace
error: asdf
… while evaluating 'x'
at «string»:1:9:
1| let x = a: throw "asdf"; in x 1
| ^
… from call site
at «string»:1:29:
1| let x = a: throw "asdf"; in x 1
| ^
```
and yet also:
```
$ nix-instantiate --eval --expr 'let x = a: throw "asdf"; in x' --show-trace
<LAMBDA>
```
Here is the thing: in both cases we are evaluating `x`!
Nix is a higher-order languages, and functions are a sort of value. When
we write `x = a: ...`, `a: ...` is the expression that `x` is being
defined to be, and that is already a value. Therefore, we should *never*
get an trace that says "while evaluating `x`", because evaluating `a:
...` is *trival* and nothing happens during it!
What is actually happening here is we are applying `x` and evaluating
its *body* with arguments substituted for parameters. I think the
simplest way to say is just "while *calling* `x`", and so that is what I
changed it to.
We need to close the GC server socket before shutting down the active
GC client connections, otherwise a client may (re)connect and get
ECONNRESET. But also handle ECONNRESET for resilience.
Fixes random failures like
GC socket disconnected
connecting to '/tmp/nix-shell.y07M0H/nix-test/default/var/nix/gc-socket/socket'
sending GC root '/tmp/nix-shell.y07M0H/nix-test/default/store/kb5yzija0f1x5xkqkgclrdzldxj6nnc6-non-blocking'
reading GC root from client: error: unexpected EOF reading a line
1 store paths deleted, 0.00 MiB freed
error: reading from file: Connection reset by peer
in gc-non-blocking.sh.
It calls strlen() on the input (rather than simply copying at most
`size` bytes), which can fail if the input is not zero-terminated and
is inefficient in any case.
Fixes#7347.
why-depends assumed that we knew the output path of the second argument.
For CA derivations, we might not know until it's built. One way to solve
this would be to build the second installable to get the output path.
In this case we don't need to, though. If the first installable (A)
depends on the second (B), then getting the store path of A will
necessitate having the store path B. The contrapositive is, if the store
path of B is not known (i.e. it's a CA derivation which hasn't been
built), then A does not depend on B.
We shouldn't skip this if the supplementary group list is empty,
because then the sandbox won't drop the supplementary groups of the
parent (like "root").
The new experimental feature 'cgroups' enables the use of cgroups for
all builds. This allows better containment and enables setting
resource limits and getting some build stats.
It occurred when a output of the dependency was already available,
so it didn't need rebuilding and didn't get added to the
inputDrvOutputs.
This process-related info wasn't suitable for the purpose of finding
the actual input paths for the builder. It is better to do this in
absolute terms by querying the store.
This change is needed to support aws-sdk-cpp 1.10 and newer.
I opted not to make this dependent on the sdk version because
the crt dependency has been in the interface of the older
sdk as well, and it was only coincidence that libstore didn't
make use of any privately defined symbols directly.
When calling `builtins.readFile` on a store path, the references of that
path are currently added to the resulting string's context.
This change makes those references the *possible* context of the string,
but filters them to keep only the references whose hash actually appears
in the string, similarly to what is done for determining the runtime
references of a path.
Cgroups are now only used for derivations that require the uid-range
range feature. This allows auto UID allocation even on systems that
don't have cgroups (like macOS).
Also, make things work on modern systems that use cgroups v2 (where
there is a single hierarchy and no "systemd" controller).
after discussing this with multiple people, I'm convinced that "build
task" is more precise: a derivation is not an action, but inert until it
is built. also it's easier to pronounce.
proposal: use "build task" for the generic concept "description of how
to derive new files from the contents of existing files". then it will
be easier to distinguish what we mean by "derivation" (a specific data
structure and Nix language value type) and "store derivation" (a
serialisation of a derivation into a file in the Nix store).
readline is not re-entrant, so entering the debugger from the
completioncallback results in an eventual segfault.
The workaround is to temporarily disable the debugger when searching
for possible completions.
Call it as `['nix', '__build-remote', ... ]` rather than the previous
`["__build-remote", "nix __build-remote", ... ]` which seemed to have
been most likely unintended
The description of the --profile option talks about the "update" operation.
This is probably meant for operations such as "nix profile install", but the
same option is reused in other subcommands, which do not update the profile,
such as "nix profile {list,history,diff-closures}".
We update the description to make sense in both contexts.
Currently, Nix passes `-a` when it runs commands on a remote machine via
SSH, which disables agent forwarding. This causes issues when the
`ForwardAgent` option is set in SSH config files, as the command line
operation always overrides those.
In particular, this causes issues if the command being run is `sudo`
and the remote machine is configured with the equivalent of NixOS's
`security.pam.enableSSHAgentAuth` option. Not allowing SSH agent
forwarding can cause authentication to fail unexpectedly.
This can currently be worked around by setting `NIX_SSHOPTS="-A"`, but
we should defer to the options in the SSH config files to be least
surprising for users.
After we've send "\2\n" to the parent, we can't send a serialized
exception anymore. It will show up garbled like
$ nix-build --store /tmp/nix --expr 'derivation { name = "foo"; system = "x86_64-linux"; builder = "/foo/bar"; }'
this derivation will be built:
/nix/store/xmdip0z5x1zqpp6gnxld3vqng7zbpapp-foo.drv
building '/nix/store/xmdip0z5x1zqpp6gnxld3vqng7zbpapp-foo.drv'...
ErrorErrorEexecuting '/foo/bar': No such file or directory
error: builder for '/nix/store/xmdip0z5x1zqpp6gnxld3vqng7zbpapp-foo.drv' failed with exit code 1
While trying to use an alternate directory for my Nix installation, I
noticed that nix's output didn't reflect the updated state
directory. This patch corrects that and now prints the warning before
attempting to create the directory (if the directory creation fails,
it wouldn't have been obvious why nix was attempting to create the
directory in the first place).
With this patch, I now get the following warning:
warning: '/home/deck/.var/app/org.nixos.nix/var/nix' does not
exist, so Nix will use '/home/deck/.local/share/nix/root' as a
chroot store
The documentation for `parseDrvName` does not agree with the implementation when
the derivation name contains a dash which is followed by something that is
neither a letter nor a digit. This commit corrects the documentation to agree
with the implementation.
If we don't have any github token, we won't be able to fetch private
repos, but we are also more likely to run into API limits since
we don't have a token. To mitigate this only ever use the github api
if we actually have a token.
The current definition of `intersectAttrs` is incorrect:
> Return a set consisting of the attributes in the set e2 that also exist in the
> set e1.
Recall that (Nix manual, section 5.1):
> An attribute set is a collection of name-value-pairs (called attributes)
According to the existing description of `intersectAttrs`, the following should
evaluate to the empty set, since no key-value *pair* (i.e. attribute) exists in
both sets:
```
builtins.intersectAttrs { x=3; } {x="foo";}
```
And yet:
```
nix-repl> builtins.intersectAttrs { x=3; } {x="foo";}
{ x = "foo"; }
```
Clearly the intent here was for the *names* of the resulting attribute set to be
the intersection of the *names* of the two arguments, and for the values of the
resulting attribute set to be the values from the second argument.
This commit corrects the definition, making it match the implementation and intent.
Make sure that people who run Nix in non-interactive mode (and so don't have the possibility to interactively accept the individual flake configuration settings) are aware of this flag.
Fix#7086
Linus Heckemann
Jörg Thalheim
Yorick
Robert Hensing
Patrick Jackson