In many cases we are dealing with a collection of realisations, they are
all outputs of the same derivation. In that case, we don't need
"derivation hashes modulos" to be part of our map key, because the
output names alone will be unique. Those hashes are still part of the
realisation proper, so we aren't loosing any information, we're just
"normalizing our schema" by narrowing the "primary key".
Besides making our data model a bit "tighter" this allows us to avoid a
double `for` loop in `DerivationGoal::waiteeDone`. The inner `for` loop
was previously just to select the output we cared about without knowing
its hash. Now we can just select the output by name directly.
Note that neither protocol is changed as part of this: we are still
transferring `DrvOutputs` over the wire for `BuildResult`s. I would only
consider revising this once #6223 is merged, and we can mention protocol
versions inside factored-out serialization logic. Until then it is
better not change anything because it would come a the cost of code
reuse.
If my memory is correct, @edolstra objected to modifying `wantedOutputs`
upon falling back to doing a build (as we did before), because we should
only modify it in response to new requests --- *actual* wants --- and
not because we are "incidentally" building all the outptus beyond what
may have been requested.
That's a fair point, and the alternative is to replace the boolean soup
with proper enums: Instead of modifying `wantedOuputs` som more, we'll
modify `needsRestart` to indicate we are passed the need.
In https://github.com/NixOS/nix/pull/6311#discussion_r834863823, I
realized since derivation goals' wanted outputs can "grow" due to
overlapping dependencies (See `DerivationGoal::addWantedOutputs`, called
by `Worker::makeDerivationGoalCommon`), the previous bug fix had an
unfortunate side effect of causing more pointless rebuilds.
In paticular, we have this situation:
1. Goal made from `DerivedPath::Built { foo, {a} }`.
2. Goal gives on on substituting, starts building.
3. Goal made from `DerivedPath::Built { foo, {b} }`, in fact is just
modified original goal.
4. Though the goal had gotten as far as building, so all outputs were
going to be produced, `addWantedOutputs` no longer knows that and so
the goal is flagged to be restarted.
This might sound far-fetched with input-addressed drvs, where we usually
basically have all our goals "planned out" before we start doing
anything, but with CA derivation goals and especially RFC 92, where *drv
resolution* means goals are created after some building is completed, it
is more likely to happen.
So the first thing to do was restore the clearing of `wantedOutputs` we
used to do, and then filter the outputs in `buildPathsWithResults` to
only get the ones we care about.
But fix also has its own side effect in that the `DerivedPath` in the
`BuildResult` in `DerivationGoal` cannot be trusted; it is merely the
*first* `DerivedPath` for which this goal was originally created.
To remedy this, I made `BuildResult` be like it was before, and instead
made `KeyedBuildResult` be a subclass wit the path. Only
`buildPathsWithResults` returns `KeyedBuildResult`s, everything else
just becomes like it was before, where the "key" is unambiguous from
context.
I think separating the "primary key" field(s) from the other fields is
good practical in general anyways. (I would like to do the same thing
for `ValidPathInfo`.) Among other things, it allows constructions like
`std::map<Key, ThingWithKey>` where doesn't contain duplicate keys and
just precludes the possibility of those duplicate keys being out of
sync.
We might leverage the above someday to overload `buildPathsWithResults`
to take a *set* of return a *map* per the above.
-----
Unfortunately, we need to avoid C++20 strictness on designated
initializers.
(BTW
https://www.open-std.org/jtc1/sc22/wg21/docs/papers/2021/p2287r1.html
this offers some new syntax for this use-case. Hopefully this will be
adopted and we can eventually use it.)
No having that yet, maybe it would be better to not make
`KeyedBuildResult` a subclass to just avoid this.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
As requested by @roberth, it is good to call out the specific instances
we care about, which is `!` for the RPC protocols, and `^` for humans.
This doesn't take advantage of parametricity as much, but since the
human and computer interfaces are good to decouple anyways (we don't
care if they drift further apart over time in the slightest) some
separation and slight duplication is fine.
Also, unit test both round trips.
More progress on issue #5729
The method trivially generalizes to be store-implementation-agnostic, in
fact.
However, we force it to continue to be unimplemented with `RemoteStore`
and `LegacySSHStore` because the implementation we'd get via the
generalization is probably not the one users expect. This keeps our
hands untied to do it right going forward.
For more about the tension between the scheduler logic being
store-type-agnostic and remote stores doing their own scheduling, see
issues #5025 and #5056.
The warning message should produce an installable name that can be
passed to `nix build`, `nix path-info`, etc. again. Since the CLI
expects that the .drv path and the output names are separated by
a caret, the warning message must also separate the .drv path and output
names with a caret.
However, `DerivedPath::Built.to_string()` uses an exclamation point as
the separator instead. This commit adds a `separator` argument to the
to_string method.
This changes the warning message from:
If this command is now failing try again with '/nix/store/foo.drv!*'
to:
If this command is now failing try again with '/nix/store/foo.drv^*'
More progress on issue #5729.
Instead of having it by the default method in `Store` itself, have it be
the implementation in `DummyStore` and `LegacySSHStore`. Then just the
implementations which fail to provide the method pay the "penalty" of
dealing with the icky `unimplemented` function for non-compliance.
Combined with my other recent PRs, this finally makes `Store` have no
`unsupported` calls!
Getting the occasional SQLITE_BUSY is expected when the database is being
accessed concurrently. The retry will likely succeed so it is pointless to warn
immediately. Instead we track how long each retrySQLite block has been running,
and only begin warning after a second has elapsed (and then every 10 seconds
subsequently).
libutil is a dependency of libstore, so it should always be
initialized as such.
libutil is also a dependency of libmain. Being explicit about this
dependency might be good, but not worth the slight code complexity
until the library structure gets more advanced.
Part of an effort to make it easier to initialize the right things,
by moving code into the appropriate libraries.
This code is bad. We shouldn't unset variables in programs whose
children may need them. Fixing one issue at a time, so postponing.
See https://github.com/NixOS/nix/issues/7731
Part of an effort to make it easier to initialize the right things,
by moving code into the appropriate libraries.
It is required for the sandbox, which is a libstore responsibility;
not just libmain.
Part of an effort to make it easier to initialize the right things,
by moving code into the appropriate libraries.
Part of an effort to make it easier to initialize the right things,
by moving code into the appropriate libraries.
Using libstore without loading the config file is risky, as sqlite
may then be misconfigured. See https://github.com/cachix/cachix/issues/475
* Finish converting existing comments for internal API docs
99% of this was just reformatting existing comments. Only two exceptions:
- Expanded upon `BuildResult::status` compat note
- Split up file-level `symbol-table.hh` doc comments to get
per-definition docs
Also fixed a few whitespace goofs, turning leading tabs to spaces and
removing trailing spaces.
Picking up from #8133
* Fix two things from comments
* Use triple-backtick not indent for `dumpPath`
* Convert GNU-style `\`..'` quotes to markdown style in API docs
This will render correctly.
This is non-breaking change in the to-JSON direction. This *is* a
breaking change in the from-JSON direction, but we don't care, as that
is brand new in this PR.
`nix show-derivation --help` currently has the sole public documentation
of this format, it is updated accordingly.
This function returns true or false depending on whether the Nix client
is trusted or not. Mostly relevant when speaking to a remote store with
a daemon.
We include this information in `nix ping store` and `nix doctor`
Co-Authored-By: John Ericson <John.Ericson@Obsidian.Systems>
The code is not local-store-specific, so we should share it with all
stores. More uniform behavior is better, and a less store-specific
functionality is more maintainable.
This fixes a FIXME added in f73d911628 by @edolstra himself.
This fixes the issue that `nix-build`, without experimental feature
'nix-command' enabled, recommends the experimental CLI `nix log` to view
build logs. Now it'll recommend the stable `nix-store -l` CLI instead.
Fixes https://github.com/NixOS/nix/issues/8118
Pause logger before starting SSH connections, and resume it after the
connection is established, so that SSH password prompts are not erased
by the logger's updates.
Otherwise, when running as root and user namespaces are enabled,
opening the slave fails with EPERM.
Fixes "opening pseudoterminal slave: Permission denied" followed by a
hang (https://hydra.nixos.org/build/213104244), and "error: getting
sandbox mount namespace: No such file or directory" (#8072), which
happens when the child fails very quickly and consequently reading
/proc/<child>/ns fails.
This provides a platform-independent way to configure the SSL
certificates file in the Nix daemon. Previously we provided
instructions for overriding the environment variable in launchd, but
that obviously doesn't work with systemd. Now we can just tell users
to add
ssl-cert-file = /etc/ssl/my-certificate-bundle.crt
to their nix.conf.
Hopefully this fixes "unexpected EOF" failures on macOS
(#3137, #3605, #7242, #7702).
The problem appears to be that under some circumstances, macOS
discards the output written to the slave side of the
pseudoterminal. Hence the parent never sees the "sandbox initialized"
message from the child, even though it succeeded. The conditions are:
* The child finishes very quickly. That's why this bug is likely to
trigger in nix-env tests, since that uses a builtin builder. Adding
a short sleep before the child exits makes the problem go away.
* The parent has closed its duplicate of the slave file
descriptor. This shouldn't matter, since the child has a duplicate
as well, but it does. E.g. moving the close to the bottom of
startBuilder() makes the problem go away. However, that's not a
solution because it would make Nix hang if the child dies before
sending the "sandbox initialized" message.
* The system is under high load. E.g. "make installcheck -j16" makes
the issue pretty reproducible, while it's very rare under "make
installcheck -j1".
As a fix/workaround, we now open the pseudoterminal slave in the
child, rather than the parent. This removes the second condition
(i.e. the parent no longer needs to close the slave fd) and I haven't
been able to reproduce the "unexpected EOF" with this.
I saw this random failure in https://hydra.nixos.org/build/211811692:
error: opening /proc/15307/fd: No such process
while running nix-collect-garbage in a readfile-context.sh. This is
because we're not handling ESRCH errors reading /proc/<pid>/fd. So
just move the read inside the try/catch where we do handle it.
`nix copy` operations did not show progress. This is quite confusing.
Add a `progressSink` which displays the progress during `copyPaths`,
pretty much copied from `copyStorePath`.
Fixes https://github.com/NixOS/nix/issues/8000
The curl download can outlive DrvOutputSubstitutionGoal (if some other
error occurs), so at shutdown setting the promise to an exception will
fail because 'this' is no longer valid in the callback. This can
manifest itself as a segfault, "corrupted double-linked list" or hang.
We make sure the env var paths are actually set (ie. not "") before
sending them to the canonicalization function. If we forget to do so,
the user will end up facing a puzzled failed assertion internal error.
We issue a non-failing warning as a stop-gap measure. We could want to
revisit this to issue a detailed failing error message in the future.
Currently the valid key is only present when the path is invalid, which
makes checking path validity more complex than it should be. With this
change, the valid key can always be used to check if a path is valid
At the moment an Error is thrown that only holds an error message
regarding `nix-env` and `nix profile`. These tools make use of
builtins.buildEnv, but buildEnv is also used in other places. These
places are unrelated to Nix profiles, so the error shouldn't mention
these tools.
This generic error is now BuildEnvFileConflictError, which holds more
contextual information about the files that were conflicting while
building the environment.
