ma27/hydra
0
0
Fork 0
forked from lix-project/hydra
Code Pull requests Activity

queue-runner: only re-sort runnables by prio once per dispatch cycle

Browse source 
The previous implementation was O(N²lg(N)) due to sorting the full
runnables priority list once per runnable being scheduled. While not
confirmed, this is suspected to cause performance issues and
bottlenecking with the queue runner when the runnable list gets large
enough.

This commit changes the dispatcher to instead only sort runnables per
priority once per dispatch cycle. This has the drawback of being less
reactive to runnable priority changes: the previous code would react
immediately, while this might end up using "old" priorities until the
next dispatch cycle. However, dispatch cycles are not supposed to take
very long (seconds, not minutes/hours), so this is not expected to have
much or any practical impact.

Ideally runnables would be maintained in a sorted data structure instead
of the current approach of copying + sorting in the scheduler. This
would however be a much more invasive change to implement, and might
have to wait until we can confirm where the queue runner bottlenecks
actually lie.
This commit is contained in:
Pierre Bourdon 2023-09-08 23:38:30 +02:00
parent 00d30874da
commit b7c864c515
Signed by untrusted user: delroth
GPG key ID: 6FB80DCD84DA0F1C
1 changed files with 106 additions and 99 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

205
src/hydra-queue-runner/dispatcher.cc
View file

@ -85,12 +85,113 @@ system_time State::doDispatch()
}
}
system_time now = std::chrono::system_clock::now();
/* Start steps until we're out of steps or slots. */
auto sleepUntil = system_time::max();
bool keepGoing;
/* Sort the runnable steps by priority. Priority is establised
as follows (in order of precedence):
- The global priority of the builds that depend on the
step. This allows admins to bump a build to the front of
the queue.
- The lowest used scheduling share of the jobsets depending
on the step.
- The local priority of the build, as set via the build's
meta.schedulingPriority field. Note that this is not
quite correct: the local priority should only be used to
establish priority between builds in the same jobset, but
here it's used between steps in different jobsets if they
happen to have the same lowest used scheduling share. But
that's not very likely.
- The lowest ID of the builds depending on the step;
i.e. older builds take priority over new ones.
FIXME: O(n lg n); obviously, it would be better to keep a
runnable queue sorted by priority. */
struct StepInfo
{
Step::ptr step;
bool alreadyScheduled = false;
/* The lowest share used of any jobset depending on this
step. */
double lowestShareUsed = 1e9;
/* Info copied from step->state to ensure that the
comparator is a partial ordering (see MachineInfo). */
int highestGlobalPriority;
int highestLocalPriority;
BuildID lowestBuildID;
StepInfo(Step::ptr step, Step::State & step_) : step(step)
{
for (auto & jobset : step_.jobsets)
lowestShareUsed = std::min(lowestShareUsed, jobset->shareUsed());
highestGlobalPriority = step_.highestGlobalPriority;
highestLocalPriority = step_.highestLocalPriority;
lowestBuildID = step_.lowestBuildID;
}
};
std::vector<StepInfo> runnableSorted;
struct RunnablePerType
{
unsigned int count{0};
std::chrono::seconds waitTime{0};
};
std::unordered_map<std::string, RunnablePerType> runnablePerType;
{
auto runnable_(runnable.lock());
runnableSorted.reserve(runnable_->size());
for (auto i = runnable_->begin(); i != runnable_->end(); ) {
auto step = i->lock();
/* Remove dead steps. */
if (!step) {
i = runnable_->erase(i);
continue;
}
++i;
auto & r = runnablePerType[step->systemType];
r.count++;
/* Skip previously failed steps that aren't ready
to be retried. */
auto step_(step->state.lock());
r.waitTime += std::chrono::duration_cast<std::chrono::seconds>(now - step_->runnableSince);
if (step_->tries > 0 && step_->after > now) {
if (step_->after < sleepUntil)
sleepUntil = step_->after;
continue;
}
runnableSorted.emplace_back(step, *step_);
}
}
sort(runnableSorted.begin(), runnableSorted.end(),
[](const StepInfo & a, const StepInfo & b)
{
return
a.highestGlobalPriority != b.highestGlobalPriority ? a.highestGlobalPriority > b.highestGlobalPriority :
a.lowestShareUsed != b.lowestShareUsed ? a.lowestShareUsed < b.lowestShareUsed :
a.highestLocalPriority != b.highestLocalPriority ? a.highestLocalPriority > b.highestLocalPriority :
a.lowestBuildID < b.lowestBuildID;
});
do {
system_time now = std::chrono::system_clock::now();
now = std::chrono::system_clock::now();
/* Copy the currentJobs field of each machine. This is
necessary to ensure that the sort comparator below is
@ -138,104 +239,6 @@ system_time State::doDispatch()
a.currentJobs > b.currentJobs;
});
/* Sort the runnable steps by priority. Priority is establised
as follows (in order of precedence):
- The global priority of the builds that depend on the
step. This allows admins to bump a build to the front of
the queue.
- The lowest used scheduling share of the jobsets depending
on the step.
- The local priority of the build, as set via the build's
meta.schedulingPriority field. Note that this is not
quite correct: the local priority should only be used to
establish priority between builds in the same jobset, but
here it's used between steps in different jobsets if they
happen to have the same lowest used scheduling share. But
that's not very likely.
- The lowest ID of the builds depending on the step;
i.e. older builds take priority over new ones.
FIXME: O(n lg n); obviously, it would be better to keep a
runnable queue sorted by priority. */
struct StepInfo
{
Step::ptr step;
/* The lowest share used of any jobset depending on this
step. */
double lowestShareUsed = 1e9;
/* Info copied from step->state to ensure that the
comparator is a partial ordering (see MachineInfo). */
int highestGlobalPriority;
int highestLocalPriority;
BuildID lowestBuildID;
StepInfo(Step::ptr step, Step::State & step_) : step(step)
{
for (auto & jobset : step_.jobsets)
lowestShareUsed = std::min(lowestShareUsed, jobset->shareUsed());
highestGlobalPriority = step_.highestGlobalPriority;
highestLocalPriority = step_.highestLocalPriority;
lowestBuildID = step_.lowestBuildID;
}
};
std::vector<StepInfo> runnableSorted;
struct RunnablePerType
{
unsigned int count{0};
std::chrono::seconds waitTime{0};
};
std::unordered_map<std::string, RunnablePerType> runnablePerType;
{
auto runnable_(runnable.lock());
runnableSorted.reserve(runnable_->size());
for (auto i = runnable_->begin(); i != runnable_->end(); ) {
auto step = i->lock();
/* Remove dead steps. */
if (!step) {
i = runnable_->erase(i);
continue;
}
++i;
auto & r = runnablePerType[step->systemType];
r.count++;
/* Skip previously failed steps that aren't ready
to be retried. */
auto step_(step->state.lock());
r.waitTime += std::chrono::duration_cast<std::chrono::seconds>(now - step_->runnableSince);
if (step_->tries > 0 && step_->after > now) {
if (step_->after < sleepUntil)
sleepUntil = step_->after;
continue;
}
runnableSorted.emplace_back(step, *step_);
}
}
sort(runnableSorted.begin(), runnableSorted.end(),
[](const StepInfo & a, const StepInfo & b)
{
return
a.highestGlobalPriority != b.highestGlobalPriority ? a.highestGlobalPriority > b.highestGlobalPriority :
a.lowestShareUsed != b.lowestShareUsed ? a.lowestShareUsed < b.lowestShareUsed :
a.highestLocalPriority != b.highestLocalPriority ? a.highestLocalPriority > b.highestLocalPriority :
a.lowestBuildID < b.lowestBuildID;
});
/* Find a machine with a free slot and find a step to run
on it. Once we find such a pair, we restart the outer
loop because the machine sorting will have changed. */
@ -245,6 +248,8 @@ system_time State::doDispatch()
if (mi.machine->state->currentJobs >= mi.machine->maxJobs) continue;
for (auto & stepInfo : runnableSorted) {
if (stepInfo.alreadyScheduled) continue;
auto & step(stepInfo.step);
/* Can this machine do this step? */
@ -271,6 +276,8 @@ system_time State::doDispatch()
r.count--;
}
stepInfo.alreadyScheduled = true;
/* Make a slot reservation and start a thread to
do the build. */
auto builderThread = std::thread(&State::builder, this,