Commit graph

357 commits

Author SHA1 Message Date
Eelco Dolstra 4c4b219c07 Call commonChildInit() before doing chroot init
This ensures that daemon clients see error messages from the chroot
setup.
2014-08-01 19:29:03 +02:00
Eelco Dolstra 50dc1f5b71 Restore default SIGPIPE handler before invoking ‘man’
Fixes NixOS/nixpkgs#3410.
2014-07-31 10:31:17 +02:00
Eelco Dolstra ee3c5d7916 Revert old useBuildHook behaviour 2014-07-19 02:25:47 +02:00
Eelco Dolstra e196eecbe6 Allow $NIX_BUILD_HOOK to be relative to Nix libexec directory 2014-07-11 13:55:06 +02:00
Eelco Dolstra 43b64f5038 Remove tabs 2014-07-10 17:32:21 +02:00
Eelco Dolstra 8e9140cfde Refactoring: Move all fork handling into a higher-order function
C++11 lambdas ftw.
2014-07-10 16:58:09 +02:00
Eelco Dolstra 7911e4c27a Remove maybeVfork 2014-07-10 13:35:44 +02:00
Danny Wilson ae6b631dc4 Fix compile errors on Illumos 2014-04-03 17:39:57 +02:00
Ludovic Courtès e7720aa10a Make sure /dev/pts/ptmx is world-writable
While running Python 3’s test suite, we noticed that on some systems
/dev/pts/ptmx is created with permissions 0 (that’s the case with my
Nixpkgs-originating 3.0.43 kernel, but someone with a Debian-originating
3.10-3 reported not having this problem.)

There’s still the problem that people without
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y are screwed (as noted in build.cc),
but I don’t see how we could work around it.
2014-04-03 13:42:45 +02:00
Eelco Dolstra 1c2550a2ae boost::shared_ptr -> std::shared_ptr 2014-03-30 00:49:23 +01:00
Eelco Dolstra acb8facbbc Fix potential segfault in waitForInput()
Since the addition of build-max-log-size, a call to
handleChildOutput() can result in cancellation of a goal.  This
invalidated the "j" iterator in the waitForInput() loop, even though
it was still used afterwards.  Likewise for the maxSilentTime
handling.

Probably fixes #231.  At least it gets rid of the valgrind warnings.
2014-03-29 22:14:11 +01:00
Eelco Dolstra 90dc50b07c restoreSIGPIPE(): Fill in sa_mask
Issue #231.
2014-03-29 20:20:14 +01:00
Ludovic Courtès 24cb65efc3 Make /dev/kvm optional
The daemon now creates /dev deterministically (thanks!).  However, it
expects /dev/kvm to be present.

The patch below restricts that requirement (1) to Linux-based systems,
and (2) to systems where /dev/kvm already exists.

I’m not sure about the way to handle (2).  We could special-case
/dev/kvm and create it (instead of bind-mounting it) in the chroot, so
it’s always available; however, it wouldn’t help much since most likely,
if /dev/kvm missing, then KVM support is missing.
2014-03-21 17:27:19 +01:00
Eelco Dolstra 1017bd68ea Set up a private /dev/pts in the chroot 2014-02-27 23:35:23 +01:00
Eelco Dolstra 3fd01b171a Set up a minimal /dev in chroots
Not bind-mounting the /dev from the host also solves the problem with
/dev/shm being a symlink to something not in the chroot.
2014-02-27 23:17:53 +01:00
Eelco Dolstra 29cde917fe Fix deadlock in SubstitutionGoal
We were relying on SubstitutionGoal's destructor releasing the lock,
but if a goal is a top-level goal, the destructor won't run in a
timely manner since its reference count won't drop to zero.  So
release it explicitly.

Fixes #178.
2014-02-27 13:34:13 +01:00
Eelco Dolstra 8129cf33d9 Slight simplification 2014-02-18 10:46:30 +01:00
Eelco Dolstra 1aa19b24b2 Add a flag ‘--check’ to verify build determinism
The flag ‘--check’ to ‘nix-store -r’ or ‘nix-build’ will cause Nix to
redo the build of a derivation whose output paths are already valid.
If the new output differs from the original output, an error is
printed.  This makes it easier to test if a build is deterministic.
(Obviously this cannot catch all sources of non-determinism, but it
catches the most common one, namely the current time.)

For example:

  $ nix-build '<nixpkgs>' -A patchelf
  ...
  $ nix-build '<nixpkgs>' -A patchelf --check
  error: derivation `/nix/store/1ipvxsdnbhl1rw6siz6x92s7sc8nwkkb-patchelf-0.6' may not be deterministic: hash mismatch in output `/nix/store/4pc1dmw5xkwmc6q3gdc9i5nbjl4dkjpp-patchelf-0.6.drv'

The --check build fails if not all outputs are valid.  Thus the first
call to nix-build is necessary to ensure that all outputs are valid.

The current outputs are left untouched: the new outputs are either put
in a chroot or diverted to a different location in the store using
hash rewriting.
2014-02-18 01:01:14 +01:00
Eelco Dolstra b6def5b542 Make --repair work on Darwin
Mac OS X doesn't allow renaming a read-only directory.

http://hydra.nixos.org/build/9113895
2014-02-17 23:09:48 +01:00
Eelco Dolstra dfbcb7c403 Refactoring 2014-02-17 23:04:52 +01:00
Eelco Dolstra 71adb090f0 When using a build hook, only copy missing paths 2014-02-17 22:58:21 +01:00
Eelco Dolstra 69fe6c58fa Move some code around
In particular, do replacing of valid paths during repair later.  This
prevents us from replacing a valid path after the build fails.
2014-02-17 22:25:15 +01:00
Eelco Dolstra 00d30496ca Heuristically detect if a build may have failed due to a full disk
This will allow Hydra to detect that a build should not be marked as
"permanently failed", allowing it to be retried later.
2014-02-17 14:15:56 +01:00
Eelco Dolstra 94f9c14d52 Fix some clang warnings 2014-01-21 18:29:55 +01:00
Eelco Dolstra 11cb4bfb25 Fix checking of NAR hashes
*headdesk*
*headdesk*
*headdesk*

So since commit 22144afa8d, Nix hasn't
actually checked whether the content of a downloaded NAR matches the
hash specified in the manifest / NAR info file.  Urghhh...
2014-01-08 17:35:49 +01:00
Domen Kožar 485f4740ee wording 2014-01-06 11:38:24 +01:00
Eelco Dolstra c5b8fe3151 Print a trace message if a build fails due to the platform being unknown 2013-12-05 14:31:57 -05:00
Eelco Dolstra a478e8a7bb Remove nix-setuid-helper
AFAIK, nobody uses it, it's not maintained, and it has no tests.
2013-11-14 11:57:37 +01:00
Eelco Dolstra b29d3f4aee Only show trace messages when tracing is enabled 2013-09-02 12:01:04 +02:00
Eelco Dolstra efe4289464 Add an option to limit the log output of builders
This is mostly useful for Hydra to deal with builders that get stuck
in an infinite loop writing data to stdout/stderr.
2013-09-02 11:58:18 +02:00
Gergely Risko c6c024ca6f Fix personality switching from x86_64 to i686
On Linux, Nix can build i686 packages even on x86_64 systems.  It's not
enough to recognize this situation by settings.thisSystem, we also have
to consult uname().  E.g. we can be running on a i686 Debian with an
amd64 kernel.  In that situation settings.thisSystem is i686-linux, but
we still need to change personality to i686 to make builds consistent.
2013-08-26 11:12:35 +02:00
Eelco Dolstra a583a2bc59 Run the daemon worker on the same CPU as the client
On a system with multiple CPUs, running Nix operations through the
daemon is significantly slower than "direct" mode:

$ NIX_REMOTE= nix-instantiate '<nixos>' -A system
real    0m0.974s
user    0m0.875s
sys     0m0.088s

$ NIX_REMOTE=daemon nix-instantiate '<nixos>' -A system
real    0m2.118s
user    0m1.463s
sys     0m0.218s

The main reason seems to be that the client and the worker get moved
to a different CPU after every call to the worker.  This patch adds a
hack to lock them to the same CPU.  With this, the overhead of going
through the daemon is very small:

$ NIX_REMOTE=daemon nix-instantiate '<nixos>' -A system
real    0m1.074s
user    0m0.809s
sys     0m0.098s
2013-08-07 14:02:04 +02:00
Eelco Dolstra a4921b8ceb Revert "build-remote.pl: Enforce timeouts locally"
This reverts commit 69b8f9980f.

The timeout should be enforced remotely.  Otherwise, if the garbage
collector is running either locally or remotely, if will block the
build or closure copying for some time.  If the garbage collector
takes too long, the build may time out, which is not what we want.
Also, on heavily loaded systems, copying large paths to and from the
remote machine can take a long time, also potentially resulting in a
timeout.
2013-07-18 12:52:29 +02:00
Shea Levy 16591eb3cc Allow bind-mounting regular files into the chroot
mount(2) with MS_BIND allows mounting a regular file on top of a regular
file, so there's no reason to only bind directories. This allows finer
control over just which files are and aren't included in the chroot
without having to build symlink trees or the like.

Signed-off-by: Shea Levy <shea@shealevy.com>
2013-07-15 16:01:33 +02:00
Eelco Dolstra 7ccd946407 Don't set $preferLocalBuild and $requiredSystemFeatures in builders
With C++ std::map, doing a comparison like ‘map["foo"] == ...’ has the
side-effect of adding a mapping from "foo" to the empty string if
"foo" doesn't exist in the map.  So we ended up setting some
environment variables by accident.
2013-06-20 18:07:27 +00:00
Eelco Dolstra 5558652709 Don't substitute derivations that have preferLocalBuild set
In particular this means that "trivial" derivations such as writeText
are not substituted, reducing the number of GET requests to the binary
cache by about 200 on a typical NixOS configuration.
2013-06-20 19:26:31 +02:00
Eelco Dolstra 1b6ee8f4c7 Allow hard links between the outputs of a derivation 2013-06-13 17:29:56 +02:00
Eelco Dolstra cd49ee0897 Fix a security bug in hash rewriting
Before calling dumpPath(), we have to make sure the files are owned by
the build user.  Otherwise, the build could contain a hard link to
(say) /etc/shadow, which would then be read by the daemon and
rewritten as a world-readable file.

This only affects systems that don't have hard link restrictions
enabled.
2013-06-13 17:12:24 +02:00
Eelco Dolstra 1e2c7c04b1 Fix assertion failure in canonicalisePathMetaData() after hash rewriting
The assertion in canonicalisePathMetaData() failed because the
ownership of the path already changed due to the hash rewriting.  The
solution is not to check the ownership of rewritten paths.

Issue #122.
2013-06-13 17:12:06 +02:00
Eelco Dolstra 6cc2a8f8ed computeFSClosure: Only process the missing/corrupt paths
Issue #122.
2013-06-13 16:43:20 +02:00
Eelco Dolstra f9ff67e948 In repair mode, update the hash of rebuilt paths
Otherwise subsequent invocations of "--repair" will keep rebuilding
the path.  This only happens if the path content differs between
builds (e.g. due to timestamps).
2013-06-13 14:46:07 +02:00
Eelco Dolstra 2ee9da9e22 In trace messages, don't print the output path
This doesn't work if there is no output named "out".  Hydra didn't use
it anyway.
2013-05-10 00:24:33 +02:00
Eelco Dolstra 6eba05613a Communicate build timeouts to Hydra 2013-05-09 18:39:04 +02:00
Eelco Dolstra 69b8f9980f build-remote.pl: Enforce timeouts locally
Don't pass --timeout / --max-silent-time to the remote builder.
Instead, let the local Nix process terminate the build if it exceeds a
timeout.  The remote builder will be killed as a side-effect.  This
gives better error reporting (since the timeout message from the
remote side wasn't properly propagated) and handles non-Nix problems
like SSH hangs.
2013-05-09 17:17:17 +02:00
Eelco Dolstra 772b70952f Fix --timeout
I'm not sure if it has ever worked correctly.  The line "lastWait =
after;" seems to mean that the timer was reset every time a build
produced log output.

Note that the timeout is now per build, as documented ("the maximum
number of seconds that a builder can run").
2013-04-23 18:04:59 +02:00
Eelco Dolstra 934cf2d1f4 Nix daemon: respect build timeout from the client 2013-04-23 16:59:06 +02:00
Eelco Dolstra 258897c265 Complain if /homeless-shelter exists 2013-04-04 11:16:26 +02:00
Eelco Dolstra bdd4646338 Revert "Prevent config.h from being clobbered"
This reverts commit 28bba8c44f.
2013-03-08 01:24:59 +01:00
Eelco Dolstra 28bba8c44f Prevent config.h from being clobbered 2013-03-07 23:55:55 +01:00
Eelco Dolstra 5526a282b5 Security: Don't allow builders to change permissions on files they don't own
It turns out that in multi-user Nix, a builder may be able to do

  ln /etc/shadow $out/foo

Afterwards, canonicalisePathMetaData() will be applied to $out/foo,
causing /etc/shadow's mode to be set to 444 (readable by everybody but
writable by nobody).  That's obviously Very Bad.

Fortunately, this fails in NixOS's default configuration because
/nix/store is a bind mount, so "ln" will fail with "Invalid
cross-device link".  It also fails if hard-link restrictions are
enabled, so a workaround is:

  echo 1 > /proc/sys/fs/protected_hardlinks

The solution is to check that all files in $out are owned by the build
user.  This means that innocuous operations like "ln
${pkgs.foo}/some-file $out/" are now rejected, but that already failed
in chroot builds anyway.
2013-02-26 02:30:19 +01:00
Ludovic Courtès 5ea138dc4b Enable chroot support on old glibc versions. 2013-02-19 10:19:11 +01:00
Eelco Dolstra 536c85ea49 Store build logs in /nix/var/log/nix/drvs/<XX>
...where <XX> is the first two characters of the derivation.
Otherwise /nix/var/log/nix/drvs may become so large that we run into
all sorts of weird filesystem limits/inefficiences.  For instance,
ext3/ext4 filesystems will barf with "ext4_dx_add_entry:1551:
Directory index full!" once you hit a few million files.
2013-01-17 15:47:26 +01:00
Eelco Dolstra def5160b61 Clear any immutable bits in the Nix store
Doing this once makes subsequent operations like garbage collecting
more efficient since we don't have to call makeMutable() first.
2013-01-03 12:59:23 +01:00
Eelco Dolstra 299141ecbd If a substitute closure is incomplete, build dependencies, then retry the substituter
Issue #77.
2013-01-02 12:38:28 +01:00
Eelco Dolstra 1b3a78a459 Automatically fall back if the references of a substitute are not substitutable
Fixes #77.
2013-01-02 12:00:26 +01:00
Eelco Dolstra b7629778ef Allow mounting a path in a different location in the chroot
Fixes #24.
2012-12-29 23:04:02 +01:00
Eelco Dolstra fbf0b2fa45 Kill the build hook rather than shutting it down cleanly
Waiting for the hook to shut down cleanly sometimes seems to lead to
hangs.
2012-12-19 11:47:42 +01:00
Eelco Dolstra 228ea7c2f9 Revert brain fart
This reverts commit cc511fd65b.
2012-12-18 20:43:47 +01:00
Eelco Dolstra cc511fd65b Check for potential infinite select() loops when building 2012-12-18 18:50:05 +01:00
Eelco Dolstra 8d8d47abd2 Only substitute wanted outputs of a derivation
If a derivation has multiple outputs, then we only want to download
those outputs that are actuallty needed.  So if we do "nix-build -A
openssl.man", then only the "man" output should be downloaded.
Likewise if another package depends on ${openssl.man}.

The tricky part is that different derivations can depend on different
outputs of a given derivation, so we may need to restart the
corresponding derivation goal if that happens.
2012-11-26 17:15:09 +01:00
Eelco Dolstra 46a369ad95 Make "nix-build -A <derivation>.<output>" do the right thing
For example, given a derivation with outputs "out", "man" and "bin":

  $ nix-build -A pkg

produces ./result pointing to the "out" output;

  $ nix-build -A pkg.man

produces ./result-man pointing to the "man" output;

  $ nix-build -A pkg.all

produces ./result, ./result-man and ./result-bin;

  $ nix-build -A pkg.all -A pkg2

produces ./result, ./result-man, ./result-bin and ./result-2.
2012-11-26 15:39:10 +01:00
Eelco Dolstra f794465ca8 Disable use of vfork()
vfork() is just too weird.  For instance, in this build:

  http://hydra.nixos.org/build/3330487

the value fromHook.writeSide becomes corrupted in the parent, even
though the child only reads from it.  At -O0 the problem goes away.
Probably the child is overriding some spilled temporary variable.

If I get bored I may implement using posix_spawn() instead.
2012-11-15 19:35:18 +01:00
Eelco Dolstra 8541d27fce Don't use std::cerr in a few places
Slightly scared of using std::cerr in a vforked process...
2012-11-15 15:01:02 +01:00
Eelco Dolstra ea89df2b76 Use vfork() instead of fork() if available
Hopefully this reduces the chance of hitting ‘unable to fork: Cannot
allocate memory’ errors.  vfork() is used for everything except
starting builders.
2012-11-09 18:00:33 +01:00
Eelco Dolstra 198dbe7fa1 Remove some redundant close() calls
They are unnecessary because we set the close-on-exec flag.
2012-11-09 16:58:51 +01:00
Eelco Dolstra 10dcee99ed Remove the quickExit function 2012-11-09 16:42:10 +01:00
Eelco Dolstra 4c34d384e6 If hashes do not match, print them in base-32 for SHA-1/SHA-256
Fixes #57.
2012-10-23 18:05:50 +02:00
Eelco Dolstra e345182055 Shorten the names of temporary build directories 2012-10-11 14:03:06 -04:00
Eelco Dolstra 2bbc4a214e nix-env: Support ‘--repair’ flag 2012-10-03 15:35:42 -04:00
Eelco Dolstra a807edfae8 Handle repairing paths that are in build-chroot-dirs 2012-10-03 11:20:16 -04:00
Eelco Dolstra a3f205b249 When repairing a derivation, check and repair the entire output closure
If we find a corrupted path in the output closure, we rebuild the
derivation that produced that particular path.
2012-10-03 10:38:09 -04:00
Eelco Dolstra 2001895f3d Add a --repair flag to ‘nix-store -r’ to repair derivation outputs
With this flag, if any valid derivation output is missing or corrupt,
it will be recreated by using a substitute if available, or by
rebuilding the derivation.  The latter may use hash rewriting if
chroots are not available.
2012-10-02 17:13:46 -04:00
Eelco Dolstra 9958bd6992 Add operation ‘nix-store --repair-path’
This operation allows fixing corrupted or accidentally deleted store
paths by redownloading them using substituters, if available.

Since the corrupted path cannot be replaced atomically, there is a
very small time window (one system call) during which neither the old
(corrupted) nor the new (repaired) contents are available.  So
repairing should be used with some care on critical packages like
Glibc.
2012-10-02 14:08:59 -04:00
Eelco Dolstra e666e1156f Handle octal escapes in /proc/self/mountinfo 2012-09-28 21:39:30 -04:00
Eelco Dolstra f406288cc7 Print a more descriptive error message if setting up the build environment fails 2012-09-28 21:37:02 -04:00
Eelco Dolstra b9c2b4d5b4 Remove setting of the immutable bit
Using the immutable bit is problematic, especially in conjunction with
store optimisation.  For instance, if the garbage collector deletes a
file, it has to clear its immutable bit, but if the file has
additional hard links, we can't set the bit afterwards because we
don't know the remaining paths.

So now that we support having the entire Nix store as a read-only
mount, we may as well drop the immutable bit.  Unfortunately, we have
to keep the code to clear the immutable bit for backwards
compatibility.
2012-09-19 16:17:54 -04:00
Eelco Dolstra 76e88871b2 Templatise tokenizeString() 2012-09-19 15:43:23 -04:00
Eelco Dolstra 00092b2d35 Keep build directory if not all expected outputs were produced
Fixes issue #123 in Nixpkgs.
2012-09-18 10:11:42 -04:00
Eelco Dolstra e56f71edaf In startBuilder(), only print the new paths we're building 2012-09-13 10:06:24 -04:00
Eelco Dolstra 479e9172b3 Build hook: Pass the timeout to the remote builder
Note that this will only work if the client has a very recent Nix
version (post 15e1b2c223), otherwise the
--option flag will just be ignored.

Fixes #50.
2012-09-12 12:18:14 -04:00
Eelco Dolstra 5e2ffd0b8a Fix "non-zero padding" error
Probably it's not a good idea to pass a temporary object to
StringSource.
2012-09-11 19:09:01 -04:00
Eelco Dolstra 8cf672091e Support building a derivation if some outputs are already valid (non-chroot case)
This uses scary hash rewriting.

Fixes #21.
2012-09-11 18:39:22 -04:00
Eelco Dolstra 9dbda2b3fe Remove debug line 2012-09-11 17:05:35 -04:00
Eelco Dolstra a2785b7391 Support building a derivation if some outputs are already valid
This handles the chroot and build hook cases, which are easy.
Supporting the non-chroot-build case will require more work (hash
rewriting!).

Issue #21.
2012-09-11 16:59:59 -04:00
Eelco Dolstra cfd968dd94 Fix stupid type error in calling std::max 2012-08-27 14:17:13 -04:00
Eelco Dolstra e94806d030 Merge branch 'master' into no-manifests 2012-08-27 11:09:07 -04:00
Eelco Dolstra d950cfe70b Check if MS_PRIVATE is defined
http://hydra.nixos.org/build/2955671
2012-08-20 15:55:49 -04:00
Eelco Dolstra 56e30e161c In the chroot, make all mounted filesystems private
This is required on systemd, which mounts filesystems as "shared"
subtrees.  Changes to shared trees in a private mount namespace are
propagated to the outside world, which is bad.
2012-08-20 15:27:30 -04:00
Eelco Dolstra f0eab0636b Don't bind-mount /proc since we mount our own 2012-08-20 15:27:00 -04:00
Eelco Dolstra 862c4c5ec5 Fix 1755 permission on temporary directories left behind by ‘-K’ 2012-08-19 16:32:42 -04:00
Eelco Dolstra 01d56c1eec Drop the block count in the garbage collector 2012-08-01 22:34:46 -04:00
Eelco Dolstra 97421eb5ec Refactor settings processing
Put all Nix configuration flags in a Settings object.
2012-07-30 19:55:41 -04:00
Eelco Dolstra d059bf48e4 Pass configuration settings to the substituters
Previously substituters could read nix.conf themselves, but this
didn't take --option flags into account.
2012-07-30 16:09:54 -04:00
Eelco Dolstra 73acb8b836 Let build.cc verify the expected hash of a substituter's output
Since SubstitutionGoal::finished() in build.cc computes the hash
anyway, we can prevent the inefficiency of computing the hash twice by
letting the substituter tell Nix about the expected hash, which can
then verify it.
2012-07-27 12:16:02 -04:00
Eelco Dolstra fbf59d95f6 Remove more tabs 2012-07-27 10:56:33 -04:00
Eelco Dolstra b4ea83249b Remove trailing whitespace / tabs 2012-07-27 09:59:18 -04:00
Eelco Dolstra 8c79100839 Merge branch 'master' into no-manifests 2012-07-26 15:14:33 -04:00
Eelco Dolstra 3a4623afbb Set permissions on temporary build directories to 0700
Fixes #39.
2012-07-26 15:04:40 -04:00
Eelco Dolstra 6193105710 Automatically optimise the Nix store when a new path is added
Auto-optimisation is enabled by default.  It can be turned off by
setting auto-optimise-store to false in nix.conf.
2012-07-23 17:14:15 -04:00
Eelco Dolstra fe241ece29 Merge branch 'master' into no-manifests 2012-07-18 10:47:59 -04:00