match_continuous limits the search to the current start position,
instead of searching the entire file.
On libc++, this improves performance dramatically:
$ time /nix/store/70ai68dfm6xbzwn26j5n4li9di52ylia-nix-3.0pre20200728_c159f48/bin/nix print-dev-env >/dev/null
/nix/store/70ai68dfm6xbzwn26j5n4li9di52ylia-nix-3.0pre20200728_c159f48/bin/ni 2.39s user 0.19s system 64% cpu 4.032 total
$ time /nix/store/cwjfxxlp83zln4mfyy1d2dbsx7f6s962-nix-3.0pre20200728_dirty/bin/nix print-dev-env >/dev/null
/nix/store/cwjfxxlp83zln4mfyy1d2dbsx7f6s962-nix-3.0pre20200728_dirty/bin/nix 0.09s user 0.05s system 65% cpu 0.204 total
Fixes#3874
Since 6185d25e52, this was very
latency-bound since it required a round-trip for every 32 KiB. So for
example copying a 514 MiB closure over a virtual ethernet device with
a articial delay of just 1 ms took 343s. Now it takes 2.7s.
Fixes#3372.
If a repo is dirty, it used to return a `rev` object with an "empty"
sha1 (0000000000000000000000000000000000000000). Please note that this
only applies for `builtins.fetchGit` and *not* for `builtins.fetchTree{
type = "git"; }`.
The new interface we offer provides a way of getting all the
DerivationOutputs with the storePaths directly, based on the observation
that it's the most common usecase.
istream->tellg() returns -1 so we can't get the number of bytes
written.
Fixes 'uploaded 's3://nix-cache/nar/00819r9lp5kajr6baxfw5dhhc0cx8ndxaz43qmd2f0gn1hk1ynlp.nar.xz' (-1 bytes) in 11620 ms' messages.
The original idea was to implement a git-fetcher in Nix's core that
supports content hashes[1]. In #3549[2] it has been suggested to
actually use `fetchTree` for this since it's a fairly generic wrapper
over the new fetcher-API[3] and already supports content-hashes.
This patch implements a new git-fetcher based on `fetchTree` by
incorporating the following changes:
* Removed the original `fetchGit`-implementation and replaced it with an
alias on the `fetchTree` implementation.
* Ensured that the `git`-fetcher from `libfetchers` always computes a
content-hash and returns an "empty" revision on dirty trees (the
latter one is needed to retain backwards-compatibility).
* The hash-mismatch error in the fetcher-API exits with code 102 as it
usually happens whenever a hash-mismatch is detected by Nix.
* Removed the `flakes`-feature-flag: I didn't see a reason why this API
is so tightly coupled to the flakes-API and at least `fetchGit` should
remain usable without any feature-flags.
* It's only possible to specify a `narHash` for a `git`-tree if either a
`ref` or a `rev` is given[4].
* It's now possible to specify an URL without a protocol. If it's missing,
`file://` is automatically added as it was the case in the original
`fetchGit`-implementation.
[1] https://github.com/NixOS/nix/pull/3216
[2] https://github.com/NixOS/nix/pull/3549#issuecomment-625194383
[3] https://github.com/NixOS/nix/pull/3459
[4] https://github.com/NixOS/nix/pull/3216#issuecomment-553956703
I think this better captures the intent of what's going on: we either
have an opaque store path, or a drv path with some outputs.
Having this structure will also help us support CA derivations: we'll
have to allow the outpath paths to be optional, so the structure we gain
now makes up for the structure we loose then.
It's a tiny function which is:
- hardly worth abstrating over, and also only used once.
- doesn't work once we get CA drvs
I rewrote the one callsite to be forwards compatable with CA
derivations, and also potentially more performant: instead of reading in
the derivation it can ust consult the SQLite DB in the common case.
Currently resizing of the terminal doesn't play nicely with
nix edit when using kakoune as the editor, as it relies on the
SIGWINCH signal which is trapped by nix. How this is not a problem
with e.g. vim is beyond me.
Virtually all other exec* calls are following a call to
restoreSignals(). This commit adds this behavior to nix edit
as well.
I got it to just become `LocalStore::addToStoreFromDump`, cleanly taking
a store and then doing nothing too fancy with it.
`LocalStore::addToStore(...Path...)` is now just a simple wrapper with a
bare-bones sinkToSource of the right dump command.
That is, the commands 'nix path-info nixpkgs#hello' and 'nix path-info
/nix/store/00ls0qi49qkqpqblmvz5s1ajl3gc63lr-hello-2.10.drv' now do the
same thing (i.e. build the derivation and operate on the output store
path, rather than the .drv path).
This reverts commit a2c27022e9. See
addToStoreSlow(), we don't need to handle this case efficiently
anymore. In fact, we can almost remove the method/hashAlgo arguments
since the non-recursive and/or non-SHA256 are almost not used anymore.
We were calculating the nar hash wrong when the file ingestion method
was flat. I don't think there's anything we can do in that case but dump
the file again, so that's what I do.
As an optomization, we again could reuse the original dump for just the
recursive and non-sha256 case, but I rather do that after this fix, and
after my other PRs which deduplicate this code.
Until now, the `gitlab`-fetcher determined the source's rev by checking
the latest commit of the given `ref` using the
`/repository/branches`-API.
This breaks however when trying to fetch a gitlab-repo by its tag:
```
$ nix repl
nix-repl> builtins.fetchTree gitlab:Ma27/nvim.nix/0.2.0
error: --- Error ------------------------------------------------------------------------------------- nix
unable to download 'https://gitlab.com/api/v4/projects/Ma27%2Fnvim.nix/repository/branches/0.2.0': HTTP error 404 ('')
```
When using the `/commits?ref_name`-endpoint[1] you can pass any kind of
valid ref to the `gitlab`-fetcher.
Please note that this fetches the only first 20 commits on a ref,
unfortunately there's currently no endpoint which only retrieves the
latest commit of any kind of `ref`.
[1] https://docs.gitlab.com/ee/api/commits.html#list-repository-commits
We've added the variant to `DerivationOutput` to support them, but made
`DerivationOutput::path` partial to avoid actually implementing them.
With this chage, we can all collaborate on "just" removing
`DerivationOutput::path` calls to implement CA derivations.
The `m` acts as termination-symbol when declaring graphics. Because
of this, the `;1m` doesn't have any effect and is directly printed to
the console:
```
$ nix repl
> builtins.fetchGit { /* ... */ }
{ outPath = "/nix/store/s0f0iz4a41cxx2h055lmh6p2d5k5bc6r-source"; rev = "e73e45b723a9a6eecb98bd5f3df395d9ab3633b6"; revCount = ;1m428; shortRev = "e73e45b"; submodules = ;1mfalse; }
```
Introduced by 6403508f5a.
This reduces memory consumption of
nix-instantiate \
-E 'with import <nixpkgs> {}; runCommand "foo" { src = ./blender; } "echo foo"' \
--option nar-buffer-size 10000
(where ./blender is a 1.1 GiB tree) from 1716 to 36 MiB, while still
ensuring that we don't do any write I/O for small source paths (up to
'nar-buffer-size' bytes). The downside is that large paths are now
always written to a temporary location in the store, even if they
produce an already valid store path. Thus, adding large paths might be
slower and run out of disk space. ¯\_(ツ)_/¯ Of course, you can always
restore the old behaviour by setting 'nar-buffer-size' to a very high
value.
Maximilian Bosch