With Linux kernel >=6.6 & glibc 2.39 a `fchmodat2(2)` is available that
isn't filtered away by the libseccomp sandbox.
Being able to use this to bypass that restriction has surprising results
for some builds such as lxc[1]:
> With kernel ≥6.6 and glibc 2.39, lxc's install phase uses fchmodat2,
> which slips through 9b88e52846/src/libstore/build/local-derivation-goal.cc (L1650-L1663).
> The fixupPhase then uses fchmodat, which fails.
> With older kernel or glibc, setting the suid bit fails in the
> install phase, which is not treated as fatal, and then the
> fixup phase does not try to set it again.
Please note that there are still ways to bypass this sandbox[2] and this is
mostly a fix for the breaking builds.
This change works by creating a syscall filter for the `fchmodat2`
syscall (number 452 on most systems). The problem is that glibc 2.39
is needed to have the correct syscall number available via
`__NR_fchmodat2` / `__SNR_fchmodat2`, but this flake is still on
nixpkgs 23.11. To have this change everywhere and not dependent on the
glibc this package is built against, I added a header
"fchmodat2-compat.hh" that sets the syscall number based on the
architecture. On most platforms its 452 according to glibc with a few
exceptions:
$ rg --pcre2 'define __NR_fchmodat2 (?!452)'
sysdeps/unix/sysv/linux/x86_64/x32/arch-syscall.h
58:#define __NR_fchmodat2 1073742276
sysdeps/unix/sysv/linux/mips/mips64/n32/arch-syscall.h
67:#define __NR_fchmodat2 6452
sysdeps/unix/sysv/linux/mips/mips64/n64/arch-syscall.h
62:#define __NR_fchmodat2 5452
sysdeps/unix/sysv/linux/mips/mips32/arch-syscall.h
70:#define __NR_fchmodat2 4452
sysdeps/unix/sysv/linux/alpha/arch-syscall.h
59:#define __NR_fchmodat2 562
I added a small regression-test to the setuid integration-test that
attempts to set the suid bit on a file using the fchmodat2 syscall.
I confirmed that the test fails without the change in
local-derivation-goal.
Additionally, we require libseccomp 2.5.5 or greater now: as it turns
out, libseccomp maintains an internal syscall table and
validates each rule against it. This means that when using libseccomp
2.5.4 or older, one may pass `452` as syscall number against it, but
since it doesn't exist in the internal structure, `libseccomp` will refuse
to create a filter for that. This happens with nixpkgs-23.11, i.e. on
stable NixOS and when building Lix against the project's flake.
To work around that
* a backport of libseccomp 2.5.5 on upstream nixpkgs has been
scheduled[3].
* the package now uses libseccomp 2.5.5 on its own already. This is to
provide a quick fix since the correct fix for 23.11 is still a staging cycle
away.
We still need the compat header though since `SCMP_SYS(fchmodat2)`
internally transforms this into `__SNR_fchmodat2` which points to
`__NR_fchmodat2` from glibc 2.39, so it wouldn't build on glibc 2.38.
The updated syscall table from libseccomp 2.5.5 is NOT used for that
step, but used later, so we need both, our compat header and their
syscall table 🤷
Relevant PRs in CppNix:
* https://github.com/NixOS/nix/pull/10591
* https://github.com/NixOS/nix/pull/10501
[1] https://github.com/NixOS/nixpkgs/issues/300635#issuecomment-2031073804
[2] https://github.com/NixOS/nixpkgs/issues/300635#issuecomment-2030844251
[3] https://github.com/NixOS/nixpkgs/pull/306070
(cherry picked from commit ba6804518772e6afb403dd55478365d4b863c854)
Change-Id: I6921ab5a363188c6bff617750d00bb517276b7fe
just accumulate error data into result.data as we would for successful
transfers without a dataCallback. errorSink and data would contain the
same data in error cases anyway, so splitting them is not very useful.
Change-Id: I00e449866454389ac6a564ab411c903fd357dabf
This creates new subclasses of LocalStore for each OS to include
platform-specific functionality. Currently this just includes garbage
collector roots but it could be extended to sandboxing as well.
In order to make sure that the generic LocalStore is not accidentally
constructed, its constructor is protected. A Fallback is provided which
implements no functionality except constructors.
Change-Id: I836a28e90b68309873f75afb83e0f1b2e2c89fb3
This should fix cross compilation in the base case, but this is
difficult to test as cross compilation is broken in many different
places right now. This should bring Meson back up to cross parity with
the Make buildsystem though.
Change-Id: If09be8142d1fc975a82b994143ff35be1297dad8
don't reimplement header parsing. this was only really needed due to the
ancient github bug we no longer care about, everything else we have done
in custom code can also be done using curl itself. doing this also fixes
possible sources of header smuggling (because the header function didn't
unfold headers and we'd trim them before parsing, which would've made us
read contents of one header as a fully formed header in itself). this is
a slight behavior change because we now honor only the first instance of
a given header where previous behavior was to honor either the last or a
combination of all of them (accept-ranges was logical-or'd by accident).
Change-Id: I93cb93ddb91ab98c8991f846014926f6ef039fdb
this was a workaround for a *github* bug that happend *in 2015*.
not only is github no longer buggy, it shouldn't have been nix's
responsibility to work around these bugs like this to begin with
while we're at it we'll also remove another workaround—again for
github specifically and again for etag handling—from 2021 that's
also not needed any more. future workarounds for serverside bugs
should probably come with an expiration date that mutates into a
build warning after a while, otherwise this *will* happen again.
Change-Id: I74f739ae3e36d40350f78bebcb5869aa8cc9adcd
the previous solution to the wakeup problem (adding a pipe and passing
it as an additional fd to curl_multi_wait) worked, but there have been
builtin alternatives for this since 2020. not only do these save code,
they're also a lot more likely to work natively on windows when needed
Change-Id: Iab751b900997110a8d15de45ea3ab0c42f7e5973
the oldest version checked for here is 7.47, which was released in
2016. it's probably safe to say that we do not need these any more
Change-Id: I003411f6b2ce6d56f7ca337390df3ea86bd59a99
With Nix 2.3, it was possible to pass a subpath of a store path to
exportReferencesGraph:
with import <nixpkgs> {};
let
hello = writeShellScriptBin "hello" ''
echo ${toString builtins.currentTime}
'';
in
writeClosure [ "${hello}/bin/hello" ]
This regressed with Nix 2.4, with a very confusing error message, that
presumably indicates it was unintentional:
error: path '/nix/store/3gl7kgjr4pwf03f0x70dgx9ln3bhl7zc-hello/bin/hello' is not in the Nix store
(cherry picked from commit 0774e8ba33c060f56bad3ff696796028249e915a)
Change-Id: I00920fb33077b831a1bb4a1b68d515ba8c3c2a69
The statically embedded busybox is not required for Lix to work, but
package.nix explicitly sets this, which was accidentally being ignored.
Change-Id: Ieeff830ac7d1f5fabe84d1a6cfd82f13d79035bf
Either the contents of `line` could cause format errors, or this usage
is Technically safe. However, I trust nothing, especially with
boost::format.
Change-Id: I07933b20bde3b305a6e5d61c2a7bab6ecb042ad9
Previously if isStorePath() was called on anything other than a
top-level /nix/store/some-path, it would throw a BadStorePath exception.
This commit duplicates the absolutely trivial check, into
maybeParseStorePath(), and leaves exception throwing to
parseStorePath(), the function that assumes you're already giving a
valid path instead of the one whose purpose is to check if its valid or
not...
Change-Id: I8dda548f0f88d14ca8c3ee927d64e0ec0681fc7b
Saves us a bunch of thinking about how to handle symlinks, and prevents
the DNS config from changing on the fly under the build, which may or may
not be a good thing?
Change-Id: I071e6ae7e220884690b788d94f480866f428db71
* changes:
meson: fix log-dir
manual: build docs with dummy envs
libcmd: install generated headers as well
docs: redo content generation for mdbook and manual
manpages can be rendered using the markdown output of mdbook, the rest
of the manual can generated out of the main doc/manual source tree. we
still use lowdown to actually render manpages instead of eg mdbook-man
because lowdown does generate reasonably good manpages (though that is
also somewhat debatable, but they're a lot better than mdbook-man).
doing this not only lets us drastically simplify the lowdown pipeline,
but also remove all custom {{#include}} handling since now mdbook does
all of it, even for the manpage builds. even the lowdown wrapper isn't
entirely necessary because lowdown can take all wrapper arguments with
command line flags rather than bits of input file content.
This also implements running mdbook in Meson, in order to generate the
manpages. The mdbook outputs are also installed in the usual location.
Co-authored-by: Qyriad <qyriad@qyriad.me>
Change-Id: I60193f9fd0f15d48872f071af35855cda2a0f40b
this should be a link, not an anchor. it should also point to the
`gloss-store` element, not the `#gloss-store` element.
Change-Id: I1f2803093179549637e10f917ad73399a419131b
Previously, errors while printing values in `nix repl` would be printed
in `«error: ...»` brackets rather than displayed normally:
```
nix-repl> legacyPackages.aarch64-darwin.pythonPackages.APScheduler
«error: Package ‘python-2.7.18.7’ in /nix/store/6s0m1qc31zw3l3kq0q4wd5cp3lqpkq0q-source/pkgs/development/interpreters/python/cpython/2.7/default.nix:335 is marked as insecure, refusing to evaluate.»
```
Now, errors will be displayed normally if they're emitted at the
top-level of an expression:
```
nix-repl> legacyPackages.aarch64-darwin.pythonPackages.APScheduler
error:
… in the condition of the assert statement
at /nix/store/6s0m1qc31zw3l3kq0q4wd5cp3lqpkq0q-source/lib/customisation.nix:268:17:
267| in commonAttrs // {
268| drvPath = assert condition; drv.drvPath;
| ^
269| outPath = assert condition; drv.outPath;
… in the left operand of the OR (||) operator
at /nix/store/6s0m1qc31zw3l3kq0q4wd5cp3lqpkq0q-source/pkgs/development/interpreters/python/passthrufun.nix:28:45:
27| if lib.isDerivation value then
28| lib.extendDerivation (valid value || throw "${name} should use `buildPythonPackage` or `toPythonModule` if it is to be part of the Python packages set.") {} value
| ^
29| else
(stack trace truncated; use '--show-trace' to show the full trace)
error: Package ‘python-2.7.18.7’ in /nix/store/6s0m1qc31zw3l3kq0q4wd5cp3lqpkq0q-source/pkgs/development/interpreters/python/cpython/2.7/default.nix:335 is marked as insecure, refusing to evaluate.
```
Errors emitted in nested structures (like e.g. when printing `nixpkgs`)
will still be printed in brackets.
Change-Id: I25aeddf08c017582718cb9772a677bf51b9fc2ad
Instead of $sysconfdir.
Fixes#231, but there's more to do in following commits to make
Meson-built Lix actually look in /etc/nix.
Change-Id: Ia8d627070f405843add46e05cff5134b76b8eb48
Adds a `repl-overlays` option, which specifies files that can overlay
and modify the top-level bindings in `nix repl`. For example, with the
following contents in `~/.config/nix/repl.nix`:
info: final: prev: let
optionalAttrs = predicate: attrs:
if predicate
then attrs
else {};
in
optionalAttrs (prev ? legacyPackages && prev.legacyPackages ? ${info.currentSystem})
{
pkgs = prev.legacyPackages.${info.currentSystem};
}
We can run `nix repl` and use `pkgs` to refer to `legacyPackages.${currentSystem}`:
$ nix repl --repl-overlays ~/.config/nix/repl.nix nixpkgs
Lix 2.90.0
Type :? for help.
Loading installable 'flake:nixpkgs#'...
Added 5 variables.
Loading 'repl-overlays'...
Added 6 variables.
nix-repl> pkgs.bash
«derivation /nix/store/g08b5vkwwh0j8ic9rkmd8mpj878rk62z-bash-5.2p26.drv»
Change-Id: Ic12e0f2f210b2f46e920c33088dfe1083f42391a
This probably snuck in in a refactor using truthiness or so. The
trustedness flag was having the optional fullness checked, rather than
the actual contained trust level.
Also adds some tests.
```
m1@6876551b-255d-4cb0-af02-8a4f17b27e2e ~ % nix store ping
warning: 'nix store ping' is a deprecated alias for 'nix store info'
Store URL: daemon
Version: 2.20.4
Trusted: 0
m1@6876551b-255d-4cb0-af02-8a4f17b27e2e ~ % nix doctor
warning: 'doctor' is a deprecated alias for 'config check'
[PASS] PATH contains only one nix version.
[PASS] All profiles are gcroots.
[PASS] Client protocol matches store protocol.
[INFO] You are trusted by store uri: daemon
```
Fixes: lix-project/lix#232
Change-Id: I21576e2a0a755036edf8814133345987617ba3d0
package.nix previously needed this callPackage'd externally, which
didn't make a lot of sense to us since this is an internal dependency.
Thus we changed it to make it more self contained.
Change-Id: I4935bc0bc80e1a132bc9b1519e917791da95037c
code blocks, if not surrounded by empty lines, have the language
tags (in these cases, always `nix`) show up in the output of :doc.
for example:
nix-repl> :doc builtins.parseFlakeRef
Synopsis: builtins.parseFlakeRef flake-ref
Parse a flake reference, and return its exploded form.
For example: nix builtins.parseFlakeRef
"github:NixOS/nixpkgs/23.05?dir=lib" evaluates to: nix { dir =
"lib"; owner = "NixOS"; ref = "23.05"; repo = "nixpkgs"; type =
"github"; }
is now instead:
nix-repl> :doc builtins.parseFlakeRef
Synopsis: builtins.parseFlakeRef flake-ref
Parse a flake reference, and return its exploded form.
For example:
| builtins.parseFlakeRef "github:NixOS/nixpkgs/23.05?dir=lib"
evaluates to:
| { dir = "lib"; owner = "NixOS"; ref = "23.05"; repo = "nixpkgs"; type = "github"; }
(closes#225)
Change-Id: I0741aeb1006a5376bb2f663d202c7a4da7e38cce
This is terrible UX, and frankly an eval failure should be a cache
invalidation anyway.
This removes the CachedEvalError type entirely.
Fixes#223.
Change-Id: I91f8003eabd0ea45003024e96d1de3c7ae8e49d8
Maximilian Bosch
eldritch horrors
Artemis Tosini
Qyriad
puck
Alyssa Ross
Ilya K
Rebecca Turner
jade
terru -