Commit graph

412 commits

Author SHA1 Message Date
Eelco Dolstra edbfe2232e Replace message "importing path <...>" with "exporting path <...>"
This causes nix-copy-closure to show what it's doing before rather
than after.
2014-07-10 21:30:22 +02:00
Eelco Dolstra 8e9140cfde Refactoring: Move all fork handling into a higher-order function
C++11 lambdas ftw.
2014-07-10 16:58:09 +02:00
Eelco Dolstra 7911e4c27a Remove maybeVfork 2014-07-10 13:35:44 +02:00
Eelco Dolstra 696f960dee Set up directories and permissions for multi-user install automatically
This automatically creates /nix/var/nix/profiles/per-user and sets the
permissions/ownership on /nix/store to 1775 and root:nixbld.
2014-05-02 14:31:15 +02:00
Eelco Dolstra dfa2f77d2e If a .drv cannot be parsed, show its path
Otherwise you just get ‘expected string `Derive(['’ which isn't very helpful.
2014-04-08 19:24:29 +02:00
Eelco Dolstra 3fd01b171a Set up a minimal /dev in chroots
Not bind-mounting the /dev from the host also solves the problem with
/dev/shm being a symlink to something not in the chroot.
2014-02-27 23:17:53 +01:00
Eelco Dolstra 00d30496ca Heuristically detect if a build may have failed due to a full disk
This will allow Hydra to detect that a build should not be marked as
"permanently failed", allowing it to be retried later.
2014-02-17 14:15:56 +01:00
Eelco Dolstra d210cdc435 Fix assertion failure in ‘nix-store --load-db’
Namely:

  nix-store: derivations.cc:242: nix::Hash nix::hashDerivationModulo(nix::StoreAPI&, nix::Derivation): Assertion `store.isValidPath(i->first)' failed.

This happened because of the derivation output correctness check being
applied before the references of a derivation are valid.
2014-02-03 22:36:07 +01:00
Eelco Dolstra d6582c04c1 Give a friendly error message if the DB directory is not writable
Previously we would say "error: setting synchronous mode: unable to
open database file" which isn't very helpful.
2014-02-01 16:57:38 +01:00
Eelco Dolstra 709cbe4e76 Include <cstring> for memset
This should fix building on Illumos.
2013-11-22 10:00:43 +00:00
Eelco Dolstra a478e8a7bb Remove nix-setuid-helper
AFAIK, nobody uses it, it's not maintained, and it has no tests.
2013-11-14 11:57:37 +01:00
Eelco Dolstra a737f51fd9 Retry all SQLite operations
To deal with SQLITE_PROTOCOL, we also need to retry read-only
operations.
2013-10-16 15:58:20 +02:00
Eelco Dolstra ff02f5336c Fix a race in registerFailedPath()
Registering the path as failed can fail if another process does the
same thing after the call to hasPathFailed().  This is extremely
unlikely though.
2013-10-16 14:55:53 +02:00
Eelco Dolstra 4bd5282573 Convenience macros for retrying a SQLite transaction 2013-10-16 14:46:35 +02:00
Eelco Dolstra bce14d0f61 Don't wrap read-only queries in a transaction
There is no risk of getting an inconsistent result here: if the ID
returned by queryValidPathId() is deleted from the database
concurrently, subsequent queries involving that ID will simply fail
(since IDs are never reused).
2013-10-16 14:36:53 +02:00
Eelco Dolstra 7cdefdbe73 Print a distinct warning for SQLITE_PROTOCOL 2013-10-16 14:27:36 +02:00
Eelco Dolstra d05bf04444 Treat SQLITE_PROTOCOL as SQLITE_BUSY
In the Hydra build farm we fairly regularly get SQLITE_PROTOCOL errors
(e.g., "querying path in database: locking protocol").  The docs for
this error code say that it "is returned if some other process is
messing with file locks and has violated the file locking protocol
that SQLite uses on its rollback journal files."  However, the SQLite
source code reveals that this error can also occur under high load:

  if( cnt>5 ){
    int nDelay = 1;                      /* Pause time in microseconds */
    if( cnt>100 ){
      VVA_ONLY( pWal->lockError = 1; )
      return SQLITE_PROTOCOL;
    }
    if( cnt>=10 ) nDelay = (cnt-9)*238;  /* Max delay 21ms. Total delay 996ms */
    sqlite3OsSleep(pWal->pVfs, nDelay);
  }

i.e. if certain locks cannot be not acquired, SQLite will retry a
number of times before giving up and returing SQLITE_PROTOCOL.  The
comments say:

  Circumstances that cause a RETRY should only last for the briefest
  instances of time.  No I/O or other system calls are done while the
  locks are held, so the locks should not be held for very long. But
  if we are unlucky, another process that is holding a lock might get
  paged out or take a page-fault that is time-consuming to resolve,
  during the few nanoseconds that it is holding the lock.  In that case,
  it might take longer than normal for the lock to free.
  ...
  The total delay time before giving up is less than 1 second.

On a heavily loaded machine like lucifer (the main Hydra server),
which often has dozens of processes waiting for I/O, it seems to me
that a page fault could easily take more than a second to resolve.
So, let's treat SQLITE_PROTOCOL as SQLITE_BUSY and retry the
transaction.

Issue NixOS/hydra#14.
2013-10-16 14:19:59 +02:00
Ivan Kozik 34bb806f74 Fix typos, especially those that end up in the Nix manual 2013-08-26 11:15:22 +02:00
Eelco Dolstra a583a2bc59 Run the daemon worker on the same CPU as the client
On a system with multiple CPUs, running Nix operations through the
daemon is significantly slower than "direct" mode:

$ NIX_REMOTE= nix-instantiate '<nixos>' -A system
real    0m0.974s
user    0m0.875s
sys     0m0.088s

$ NIX_REMOTE=daemon nix-instantiate '<nixos>' -A system
real    0m2.118s
user    0m1.463s
sys     0m0.218s

The main reason seems to be that the client and the worker get moved
to a different CPU after every call to the worker.  This patch adds a
hack to lock them to the same CPU.  With this, the overhead of going
through the daemon is very small:

$ NIX_REMOTE=daemon nix-instantiate '<nixos>' -A system
real    0m1.074s
user    0m0.809s
sys     0m0.098s
2013-08-07 14:02:04 +02:00
Eelco Dolstra 1906cce6fc Increase SQLite's auto-checkpoint interval
Common operations like instantiating a NixOS system config no longer
fitted in 8192 pages, leading to more fsyncs.  So increase this limit.
2013-06-20 14:01:33 +00:00
Eelco Dolstra 22144afa8d Don't keep "disabled" substituters running
For instance, it's pointless to keep copy-from-other-stores running if
there are no other stores, or download-using-manifests if there are no
manifests.  This also speeds things up because we don't send queries
to those substituters.
2013-06-20 11:55:15 +02:00
Eelco Dolstra 1b6ee8f4c7 Allow hard links between the outputs of a derivation 2013-06-13 17:29:56 +02:00
Eelco Dolstra f9ff67e948 In repair mode, update the hash of rebuilt paths
Otherwise subsequent invocations of "--repair" will keep rebuilding
the path.  This only happens if the path content differs between
builds (e.g. due to timestamps).
2013-06-13 14:46:07 +02:00
Eelco Dolstra ca70fba0bf Remove obsolete EOF checks 2013-06-07 15:10:23 +02:00
Eelco Dolstra 5959c591a0 Process stderr from substituters while doing have/info queries 2013-06-07 15:02:14 +02:00
Eelco Dolstra c5f9d0d080 Buffer reads from the substituter
This greatly reduces the number of system calls.
2013-06-07 14:00:23 +02:00
Eelco Dolstra 470553bd05 Don't let stderr writes in substituters cause a deadlock 2013-05-01 13:21:39 +02:00
Shea Levy cc63db1dd5 makeStoreWritable: Ask forgiveness, not permission
It is surprisingly impossible to check if a mountpoint is a bind mount
on Linux, and in my previous commit I forgot to check if /nix/store was
even a mountpoint at all. statvfs.f_flag is not populated with MS_BIND
(and even if it were, my check was wrong in the previous commit).

Luckily, the semantics of mount with MS_REMOUNT | MS_BIND make both
checks unnecessary: if /nix/store is not a mountpoint, then mount will
fail with EINVAL, and if /nix/store is not a bind-mount, then it will
not be made writable. Thus, if /nix/store is not a mountpoint, we fail
immediately (since we don't know how to make it writable), and if
/nix/store IS a mountpoint but not a bind-mount, we fail at first write
(see below for why we can't check and fail immediately).

Note that, due to what is IMO buggy behavior in Linux, calling mount
with MS_REMOUNT | MS_BIND on a non-bind readonly mount makes the
mountpoint appear writable in two places: In the sixth (but not the
10th!) column of mountinfo, and in the f_flags member of struct statfs.
All other syscalls behave as if the mount point were still readonly (at
least for Linux 3.9-rc1, but I don't think this has changed recently or
is expected to soon). My preferred semantics would be for MS_REMOUNT |
MS_BIND to fail on a non-bind mount, as it doesn't make sense to remount
a non bind-mount as a bind mount.
2013-03-25 19:00:16 +01:00
Shea Levy 2c9cf50746 makeStoreWritable: Use statvfs instead of /proc/self/mountinfo to find out if /nix/store is a read-only bind mount
/nix/store could be a read-only bind mount even if it is / in its own filesystem, so checking the 4th field in mountinfo is insufficient.

Signed-off-by: Shea Levy <shea@shealevy.com>
2013-03-25 19:00:16 +01:00
Eelco Dolstra bdd4646338 Revert "Prevent config.h from being clobbered"
This reverts commit 28bba8c44f.
2013-03-08 01:24:59 +01:00
Eelco Dolstra 28bba8c44f Prevent config.h from being clobbered 2013-03-07 23:55:55 +01:00
Eelco Dolstra 8057a192e3 Handle systems without lutimes() or lchown() 2013-02-28 19:55:09 +01:00
Eelco Dolstra f45c731cd7 Handle symlinks properly
Now it's really brown paper bag time...
2013-02-28 14:51:08 +01:00
Eelco Dolstra 0111ba98ea Handle hard links to other files in the output 2013-02-27 17:18:41 +01:00
Eelco Dolstra b008674e46 Refactoring: Split off the non-recursive canonicalisePathMetaData()
Also, change the file mode before changing the owner.  This prevents a
slight time window in which a setuid binary would be setuid root.
2013-02-27 16:42:19 +01:00
Eelco Dolstra 5526a282b5 Security: Don't allow builders to change permissions on files they don't own
It turns out that in multi-user Nix, a builder may be able to do

  ln /etc/shadow $out/foo

Afterwards, canonicalisePathMetaData() will be applied to $out/foo,
causing /etc/shadow's mode to be set to 444 (readable by everybody but
writable by nobody).  That's obviously Very Bad.

Fortunately, this fails in NixOS's default configuration because
/nix/store is a bind mount, so "ln" will fail with "Invalid
cross-device link".  It also fails if hard-link restrictions are
enabled, so a workaround is:

  echo 1 > /proc/sys/fs/protected_hardlinks

The solution is to check that all files in $out are owned by the build
user.  This means that innocuous operations like "ln
${pkgs.foo}/some-file $out/" are now rejected, but that already failed
in chroot builds anyway.
2013-02-26 02:30:19 +01:00
Eelco Dolstra 5e9c3da412 Only warn about SQLite being busy once
No need to get annoying.
2013-01-23 16:45:10 +01:00
Eelco Dolstra b424d29d1b Open the database after removing immutable bits 2013-01-03 13:29:17 +01:00
Eelco Dolstra def5160b61 Clear any immutable bits in the Nix store
Doing this once makes subsequent operations like garbage collecting
more efficient since we don't have to call makeMutable() first.
2013-01-03 12:59:23 +01:00
Eelco Dolstra 772778c0ec On SQLITE_BUSY, wait a random amount of time
If all contending processes wait a fixed amount of time (100 ms),
there is a good probability that they'll just collide again.
2012-12-11 11:49:42 +01:00
Eelco Dolstra ea89df2b76 Use vfork() instead of fork() if available
Hopefully this reduces the chance of hitting ‘unable to fork: Cannot
allocate memory’ errors.  vfork() is used for everything except
starting builders.
2012-11-09 18:00:33 +01:00
Eelco Dolstra 198dbe7fa1 Remove some redundant close() calls
They are unnecessary because we set the close-on-exec flag.
2012-11-09 16:58:51 +01:00
Eelco Dolstra 10dcee99ed Remove the quickExit function 2012-11-09 16:42:10 +01:00
Eelco Dolstra 4c9e3fa641 Remove a Darwin hack that should no longer be needed 2012-11-09 16:35:42 +01:00
Eelco Dolstra 91ef4d9a81 Remove unnecessary call to closeMostFDs()
We have close-on-exec on all FDs now, and there is no security risk in
passing open FDs to substituters anyway.
2012-11-09 14:43:47 +01:00
Shea Levy d0fc615af6 canonicalizePathMetaData: Fall-back to utimes if lutimes fails due to ENOSYS 2012-11-06 11:29:59 +01:00
Eelco Dolstra 904f50412c nix-store --verify: Continue on errors 2012-10-04 10:20:23 -04:00
Eelco Dolstra 7586095504 Remove bin2c 2012-10-03 16:59:28 -04:00
Eelco Dolstra 0a7084567f Add a ‘--repair’ flag to nix-instantiate
This allows repairing corrupted derivations and other source files.
2012-10-03 15:09:18 -04:00
Eelco Dolstra a3f205b249 When repairing a derivation, check and repair the entire output closure
If we find a corrupted path in the output closure, we rebuild the
derivation that produced that particular path.
2012-10-03 10:38:09 -04:00
Eelco Dolstra 2001895f3d Add a --repair flag to ‘nix-store -r’ to repair derivation outputs
With this flag, if any valid derivation output is missing or corrupt,
it will be recreated by using a substitute if available, or by
rebuilding the derivation.  The latter may use hash rewriting if
chroots are not available.
2012-10-02 17:13:46 -04:00
Eelco Dolstra 8e3a7bd712 nix-store --verify: Add an option ‘--repair’ to repair all missing/corrupt paths
Also, return a non-zero exit code if errors remain after
verifying/repairing.
2012-10-02 15:12:56 -04:00
Eelco Dolstra d534f137f0 Make the store writable before creating /nix/store/.links 2012-09-25 16:30:08 -04:00
Eelco Dolstra b9c2b4d5b4 Remove setting of the immutable bit
Using the immutable bit is problematic, especially in conjunction with
store optimisation.  For instance, if the garbage collector deletes a
file, it has to clear its immutable bit, but if the file has
additional hard links, we can't set the bit afterwards because we
don't know the remaining paths.

So now that we support having the entire Nix store as a read-only
mount, we may as well drop the immutable bit.  Unfortunately, we have
to keep the code to clear the immutable bit for backwards
compatibility.
2012-09-19 16:17:54 -04:00
Eelco Dolstra b9124a5c33 Support having /nix/store as a read-only bind mount
It turns out that the immutable bit doesn't work all that well.  A
better way is to make the entire Nix store a read-only bind mount,
i.e. by doing

  $ mount --bind /nix/store /nix/store
  $ mount -o remount,ro,bind /nix/store

(This would typically done in an early boot script, before anything
from /nix/store is used.)

Since Nix needs to be able to write to the Nix store, it now detects
if /nix/store is a read-only bind mount and then makes it writable in
a private mount namespace.
2012-09-19 15:45:29 -04:00
Eelco Dolstra 76e88871b2 Templatise tokenizeString() 2012-09-19 15:43:23 -04:00
Eelco Dolstra e6e495649c Vacuum the SQLite DB after running the garbage collector 2012-09-13 14:33:41 -04:00
Eelco Dolstra c770a2422a Report substituter errors to clients of the Nix daemon 2012-08-01 11:19:24 -04:00
Eelco Dolstra 97421eb5ec Refactor settings processing
Put all Nix configuration flags in a Settings object.
2012-07-30 19:55:41 -04:00
Eelco Dolstra d059bf48e4 Pass configuration settings to the substituters
Previously substituters could read nix.conf themselves, but this
didn't take --option flags into account.
2012-07-30 16:09:54 -04:00
Eelco Dolstra f9613da180 Remove unused variables 2012-07-30 15:43:37 -04:00
Eelco Dolstra 6183cf2f19 Fix whitespace 2012-07-30 15:42:18 -04:00
Eelco Dolstra 50395b71a9 Fix the substituter tests 2012-07-26 17:36:07 -04:00
Eelco Dolstra 8c79100839 Merge branch 'master' into no-manifests 2012-07-26 15:14:33 -04:00
Eelco Dolstra 6193105710 Automatically optimise the Nix store when a new path is added
Auto-optimisation is enabled by default.  It can be turned off by
setting auto-optimise-store to false in nix.conf.
2012-07-23 17:14:15 -04:00
Eelco Dolstra 6852289c46 Use lutimes() if available to canonicalise the timestamp of symlinks
Also use utimes() instead of utime() if lutimes() is not available.
2012-07-23 16:52:25 -04:00
Eelco Dolstra fe241ece29 Merge branch 'master' into no-manifests 2012-07-18 10:47:59 -04:00
Eelco Dolstra ccc52adfb2 Add function queryPathFromHashPart()
To implement binary caches efficiently, Hydra needs to be able to map
the hash part of a store path (e.g. "gbg...zr7") to the full store
path (e.g. "/nix/store/gbg...kzr7-subversion-1.7.5").  (The binary
cache mechanism uses hash parts as a key for looking up store paths to
ensure privacy.)  However, doing a search in the Nix store for
/nix/store/<hash>* is expensive since it requires reading the entire
directory.  queryPathFromHashPart() prevents this by doing a cheap
database lookup.
2012-07-17 18:55:39 -04:00
Eelco Dolstra 09a6321aeb Replace hasSubstitutes() with querySubstitutablePaths()
querySubstitutablePaths() takes a set of paths, so this greatly
reduces daemon <-> client latency.
2012-07-11 17:52:18 -04:00
Eelco Dolstra 58ef4d9a95 Add a function queryValidPaths()
queryValidPaths() combines multiple calls to isValidPath() in one.
This matters when using the Nix daemon because it reduces latency.
For instance, on "nix-env -qas \*" it reduces execution time from 5.7s
to 4.7s (which is indistinguishable from the non-daemon case).
2012-07-11 11:08:47 -04:00
Eelco Dolstra 667d5f1936 Rename queryValidPaths() to queryAllValidPaths() 2012-07-11 10:49:04 -04:00
Eelco Dolstra eb3036da87 Implement querySubstitutablePathInfos() in the daemon
Also removed querySubstitutablePathInfo().
2012-07-11 10:43:24 -04:00
Eelco Dolstra 11800e6198 download-from-binary-cache: parallelise fetching of NAR info files
Getting substitute information using the binary cache substituter has
non-trivial latency overhead.  A package or NixOS system configuration
can have hundreds of dependencies, and in the worst case (when the
local info cache is empty) we have to do a separate HTTP request for
each of these.  If the ping time to the server is t, getting N info
files will take tN seconds; e.g., with a ping time of 0.1s to
nixos.org, sequentially downloading 1000 info files (a typical NixOS
config) will take at least 100 seconds.

To fix this problem, the binary cache substituter can now perform
requests in parallel.  This required changing the substituter
interface to support a function querySubstitutablePathInfos() that
queries multiple paths at the same time, and rewriting queryMissing()
to take advantage of parallelism.  (Due to local caching,
parallelising queryMissing() is sufficient for most use cases, since
it's almost always called before building a derivation and thus fills
the local info cache.)

For example, parallelism speeds up querying all 1056 paths in a
particular NixOS system configuration from 116s to 2.6s.  It works so
well because the eccentricity of the top-level derivation in the
dependency graph is only 9.  So we only need 10 round-trips (when
using an unlimited number of parallel connections) to get everything.

Currently we do a maximum of 150 parallel connections to the server.
Thus it's important that the binary cache server (e.g. nixos.org) has
a high connection limit.  Alternatively we could use HTTP pipelining,
but WWW::Curl doesn't support it and libcurl has a hard-coded limit of
5 requests per pipeline.
2012-07-06 19:08:20 -04:00
Eelco Dolstra 4bc4da331a Reserve some disk space for the garbage collector
We can't open a SQLite database if the disk is full.  Since this
prevents the garbage collector from running when it's most needed, we
reserve some dummy space that we can free just before doing a garbage
collection.  This actually revives some old code from the Berkeley DB
days.

Fixes #27.
2012-05-29 22:59:12 -04:00
Eelco Dolstra 6387830c3b Merge pull request #2 from viric/master
Again, adding the sync option
2012-04-23 03:29:03 -07:00
Eelco Dolstra 117670be57 Make the garbage collector more concurrent
Make the garbage collector more concurrent by deleting valid paths
outside the region where we're holding the global GC lock.  This
should greatly reduce the time during which new builds are blocked,
since the deletion accounts for the vast majority of the time spent in
the GC.

To ensure that this is safe, the valid paths are invalidated and
renamed to some arbitrary path while we're holding the lock.  This
ensures that we when we finally delete the path, it's not a (newly)
valid or locked path.
2012-03-26 20:43:33 +02:00
Lluís Batlle i Rossell 85799bf89e Fixing the default of sync-before-registering
Setting 'false' as default, as suggested by Eelco.

I also added a comment about the setting in the code.
2012-03-22 20:05:54 +01:00
Lluís Batlle i Rossell 25de80e2b6 Adding a nix option to sync before registering a path, for non-ext*
filesystems.
2012-03-22 19:57:42 +01:00
Eelco Dolstra 19d9762ad5 nix-store --clear-failed-paths: Clear derivation outputs
If the argument to ‘nix-store --clear-failed-paths’ is a derivation,
then clear the failed state of its outputs.
2012-03-20 18:23:26 +01:00
Eelco Dolstra 2b4964f319 Restore progress indication during nix-copy-closure 2012-03-05 18:13:44 +01:00
Eelco Dolstra 8afd28a922 Remove dependency on sqlite3_table_column_metadata
Not all SQLite builds have the function sqlite3_table_column_metadata.
We were only using it in a schema upgrade check for compatibility with
databases that were probably never seen in the wild.  So remove it.
2012-03-01 16:06:49 +01:00
Eelco Dolstra bd013b6f98 On Linux, make the Nix store really read-only by using the immutable bit
I was bitten one time too many by Python modifying the Nix store by
creating *.pyc files when run as root.  On Linux, we can prevent this
by setting the immutable bit on files and directories (as in ‘chattr
+i’).  This isn't supported by all filesystems, so it's not an error
if setting the bit fails.  The immutable bit is cleared by the garbage
collector before deleting a path.  The only tricky aspect is in
optimiseStore(), since it's forbidden to create hard links to an
immutable file.  Thus optimiseStore() temporarily clears the immutable
bit before creating the link.
2012-02-15 01:31:56 +01:00
Eelco Dolstra 5e57047d87 Fix a broken guard around utime()
Because of an outdated check for a timestamp of 0, we were calling
utime() even when it wasn't necessary.
2012-02-15 01:00:30 +01:00
Eelco Dolstra b1004f40f7 * Reject a build if there is a cycle among the outputs. This is
necessary because existing code assumes that the references graph is
  acyclic.
2011-12-30 14:47:14 +00:00
Eelco Dolstra 194d21f9f6 * Sync with the trunk. 2011-12-16 23:33:01 +00:00
Eelco Dolstra 273b288a7e * importPath() -> importPaths(). Because of buffering of the input
stream it's now necessary for the daemon to process the entire
  sequence of exported paths, rather than letting the client do it.
2011-12-16 22:31:25 +00:00
Eelco Dolstra e0bd307802 * Make the import operation through the daemon much more efficient
(way fewer roundtrips) by allowing the client to send data in bigger
  chunks.
* Some refactoring.
2011-12-16 19:44:13 +00:00
Eelco Dolstra 5a1b9ed0aa * Refactoring: move sink/source buffering into separate classes.
* Buffer the HashSink.  This speeds up hashing a bit because it
  prevents lots of calls to the hash update functions (e.g. nix-hash
  went from 9.3s to 8.7s of user time on the closure of my
  /var/run/current-system).
2011-12-15 16:19:53 +00:00
Eelco Dolstra c8c0380744 * Remove unnecessary quotes. showPaths() already adds quotes. 2011-12-05 21:04:20 +00:00
Eelco Dolstra 000160f5b9 * In ‘nix-store --verify --check-contents’, repair missing hashes
rather than complain about them.
2011-12-02 17:52:18 +00:00
Eelco Dolstra 5bbd693cae * Add an API function exportPaths() that provides the functionality of
‘nix-store --export’.
* Add a Perl module that provides the functionality of
  ‘nix-copy-closure --to’.  This is used by build-remote.pl so it no
  longer needs to start a separate nix-copy-closure process.  Also, it
  uses the Perl API to do the export, so it doesn't need to start a
  separate nix-store process either.  As a result, nix-copy-closure
  and build-remote.pl should no longer fail on very large closures due
  to an "Argument list too long" error.  (Note that having very many
  dependencies in a single derivation can still fail because the
  environment can become too large.  Can't be helped though.)
2011-11-23 15:13:37 +00:00
Eelco Dolstra c0b706213d * Boldly make SQLite WAL mode the default again. Hopefully the
intermittent problems are gone by now.  WAL mode is preferrable
  because it does way fewer fsyncs.
2011-11-07 21:11:59 +00:00
Shea Levy af2e53fd48 Include all outputs of derivations in the closure of explicitly-passed derivation paths
This required adding a queryOutputDerivationNames function in the store API
2011-11-06 06:28:20 +00:00
Eelco Dolstra 13114daa3e * Ouch. A store upgrade could cause a substituter to be triggered,
causing a deadlock.
2011-09-12 09:07:43 +00:00
Eelco Dolstra 93227ff65c * Eliminate all uses of the global variable ‘store’ from libstore.
This should also fix:

    nix-instantiate: ./../boost/shared_ptr.hpp:254: T* boost::shared_ptr<T>::operator->() const [with T = nix::StoreAPI]: Assertion `px != 0' failed.

  which was caused by hashDerivationModulo() calling the ‘store’
  object (during store upgrades) before openStore() assigned it.
2011-08-31 21:11:50 +00:00
Eelco Dolstra b2027f70d9 * Fix a huuuuge security hole in the Nix daemon. It didn't check that
derivations added to the store by clients have "correct" output
  paths (meaning that the output paths are computed by hashing the
  derivation according to a certain algorithm).  This means that a
  malicious user could craft a special .drv file to build *any*
  desired path in the store with any desired contents (so long as the
  path doesn't already exist).  Then the attacker just needs to wait
  for a victim to come along and install the compromised path.

  For instance, if Alice (the attacker) knows that the latest Firefox
  derivation in Nixpkgs produces the path

    /nix/store/1a5nyfd4ajxbyy97r1fslhgrv70gj8a7-firefox-5.0.1

  then (provided this path doesn't already exist) she can craft a .drv
  file that creates that path (i.e., has it as one of its outputs),
  add it to the store using "nix-store --add", and build it with
  "nix-store -r".  So the fake .drv could write a Trojan to the
  Firefox path.  Then, if user Bob (the victim) comes along and does

    $ nix-env -i firefox
    $ firefox

  he executes the Trojan injected by Alice.

  The fix is to have the Nix daemon verify that derivation outputs are
  correct (in addValidPath()).  This required some refactoring to move
  the hash computation code to libstore.
2011-07-20 18:10:47 +00:00
Eelco Dolstra c931a7aec5 * Do a short sleep after SQLITE_BUSY. 2010-12-17 17:23:15 +00:00
Eelco Dolstra 3dd02580e3 * I forgot to catch SQLiteBusy in registerValidPaths(). So
registerValidPaths() now handles busy errors and registerValidPath()
  is simply a wrapper around it.
2010-12-14 13:25:20 +00:00
Eelco Dolstra 5833243c92 * Create /nix/var/nix/db if it's missing. 2010-12-13 13:42:34 +00:00
Eelco Dolstra e4720b1a79 * Ignore the result of sqlite3_reset(). 2010-12-08 18:19:15 +00:00
Eelco Dolstra 8062d3af30 * `nix-store --verify --check-contents': don't hold the global GC lock
while checking the contents, since this operation can take a very
  long time to finish.  Also, fill in missing narSize fields in the DB
  while doing this.
2010-12-06 15:29:38 +00:00
Eelco Dolstra de79d23f76 * Retry a transaction if SQLite returns SQLITE_BUSY. This can happen
even with a very long busy timeout, because SQLITE_BUSY is also
  returned to resolve deadlocks.  This should get rid of random
  "database is locked" errors.  This is kind of hard to test though.
* Fix a horrible bug in deleteFromStore(): deletePathWrapped() should
  be called after committing the transaction, not before, because the
  commit might not succeed.
2010-12-05 18:23:19 +00:00
Eelco Dolstra bdf089f463 * Before a build, show the disk space that the downloaded store paths
will approximately require.
2010-11-17 14:31:42 +00:00
Eelco Dolstra e60c962fb8 * Add an operation `nix-store -q --size'. 2010-11-17 12:40:52 +00:00
Eelco Dolstra a3883cbd28 * Store the size of a store path in the database (to be precise, the
size of the NAR serialisation of the path, i.e., `nix-store --dump
  PATH').  This is useful for Hydra.
2010-11-16 17:11:46 +00:00
Eelco Dolstra 64fd29855a * Wrap deleteFromStore() in a transaction. Otherwise there might be a
race with other processes that add new referrers to a path,
  resulting in the garbage collector crashing with "foreign key
  constraint failed".  (Nix/4)
* Make --gc --print-dead etc. interruptible.
2010-10-14 15:55:51 +00:00
Eelco Dolstra e4907411c2 * Only do "pragma journal_mode = ..." if the current journal mode
differs from the desired mode.  There is an open SQLite ticket
  `Executing "PRAGMA journal_mode" may delete journal file while it is
  in use.'
2010-09-01 11:36:22 +00:00
Eelco Dolstra e2e168f7c2 `nix-store --verify' improvements:
* If a path has disappeared, check its referrers first, and don't try
  to invalidate paths that have valid referrers.  Otherwise we get a
  foreign key constraint violation.
* Read the whole Nix store directory instead of statting each valid
  path, which is slower.
* Acquire the global GC lock.
2010-08-31 11:47:31 +00:00
Eelco Dolstra 034f608e00 * Don't complain if the stored hash of a path is zero (unknown). 2010-08-24 14:25:33 +00:00
Eelco Dolstra fd9c77dfc7 * Use SQLite 3.7.0's write-ahead logging (WAL mode). This is a lot
faster than the old mode when fsyncs are enabled, because it only
  performs an fsync() when doing a checkpoint, rather than at every
  commit.  Some timings for doing a "nix-instantiate /etc/nixos/nixos
  -A system" after modifying the stdenv setup script:

    42.5s - SQLite 3.6.23 with truncate mode and fsync
     3.4s - SQLite 3.6.23 with truncate mode and no fsync
    32.1s - SQLite 3.7.0 with truncate mode and fsync
    16.8s - SQLite 3.7.0 with WAL mode and fsync, auto-checkpoint
            every 1000 pages
     8.3s - SQLite 3.7.0 with WAL mode and fsync, auto-checkpoint
            every 8192 pages
     1.7s - SQLite 3.7.0 with WAL mode and no fsync

  The default is now to use WAL mode with fsyncs.  Because WAL doesn't
  work on remote filesystems such as NFS (as it uses shared memory),
  truncate mode can be re-enabled by setting the "use-sqlite-wal"
  option to false.
2010-08-04 17:35:59 +00:00
Eelco Dolstra 3e5e0faf9c * Okay, putting a lock on the temporary directory used by importPath()
doesn't work because the garbage collector doesn't actually look at
  locks.  So r22253 was stupid.  Use addTempRoot() instead.  Also,
  locking the temporary directory in exportPath() was silly because it
  isn't even in the store.
2010-06-21 11:08:09 +00:00
Eelco Dolstra bf87cc44b4 * Sync with the trunk. 2010-06-21 07:55:38 +00:00
Eelco Dolstra b57189174f * In importPath() and exportPath(), lock the temporary directory to
prevent it from being deleted by the garbage collector.
2010-06-14 08:34:48 +00:00
Eelco Dolstra d1f6c0cbe3 * Replacing ValidPath rows doesn't work because it causes a constraint
violation of the Refs table.  So don't do that.
2010-06-08 13:38:28 +00:00
Eelco Dolstra aa45027818 * Sync with the trunk. 2010-05-12 22:13:09 +00:00
Eelco Dolstra 6199f9b93e * Added a command `nix-store --clear-failed-paths <PATHS>' to clear
the "failed" status of the given store paths.  The special value `*'
  clears all failed paths.
2010-04-26 12:56:42 +00:00
Eelco Dolstra 2398af13c5 * Add an command `nix-store --query-failed-paths' to list the cached
failed paths (when using the `build-cache-failure' option).
2010-04-26 12:43:42 +00:00
Eelco Dolstra efc7a579e8 * Don't use the ATerm library for parsing/printing .drv files. 2010-04-19 13:46:58 +00:00
Eelco Dolstra 1a65142ec4 * Remove a debug statement. 2010-03-10 12:46:25 +00:00
Eelco Dolstra 4c356acd04 * In `nix-store --export', abort if the contents of a path has
changed.  This prevents corrupt paths from spreading to other
  machines.  Note that checking the hash is cheap because we're
  hashing anyway (because of the --sign feature).
2010-03-09 14:32:03 +00:00
Eelco Dolstra 2e4ef03aa3 * Increase the sqlite timeout. 2010-03-08 10:35:45 +00:00
Eelco Dolstra 3f9e647ae8 * checkInterrupt() shouldn't be called from a destructor. 2010-03-02 19:04:17 +00:00
Eelco Dolstra af565c348a * Support read-only access to the database. 2010-02-24 16:44:43 +00:00
Eelco Dolstra e33f67ff0b * Refactor the upgrade / database initialisation logic a bit. 2010-02-24 16:30:20 +00:00
Eelco Dolstra 84a4dd5ff0 * Don't use fdatasync since it doesn't work on Snow Leopard.
* Don't refer to config.h in util.hh, because config.h is not
  installed (http://hydra.nixos.org/build/303053).
2010-02-24 15:46:06 +00:00
Eelco Dolstra cfe742cfc5 * A function to query just the database id of a valid path. 2010-02-24 15:07:23 +00:00
Eelco Dolstra 9fd85c94de * Use `truncate' journal mode, which should be a bit faster. 2010-02-24 14:22:34 +00:00
Eelco Dolstra a3c63d0d6c * Disable fsync() in SQLite if the fsync-metadata option is set to
false.
* Change the default for `fsync-metadata' to true.
* Disable `fsync-metadata' in `make check'.
2010-02-24 13:12:57 +00:00
Eelco Dolstra 90b6352d0a * Do registerValidPaths() in one transaction, which is much faster.
E.g. it cuts the runtime of the referrers test from 50s to 23s.
2010-02-24 12:48:00 +00:00
Eelco Dolstra 462bd50aef * Use normal (rather than full) synchronous mode, which I gather from
the description at http://www.sqlite.org/atomiccommit.html should be
  safe enough.
2010-02-24 10:57:57 +00:00
Eelco Dolstra 2b20318b0e 2010-02-22 14:24:37 +00:00
Eelco Dolstra 9cda616949 * The database needs a trigger to get rid of self-references to
prevent a foreign key constraint violation on the Refs table when
  deleting a path.
2010-02-22 14:18:55 +00:00
Eelco Dolstra c4d388add4 * Get derivation outputs from the database instead of the .drv file,
which requires more I/O.
2010-02-22 12:44:36 +00:00
Eelco Dolstra 103cfee056 * Revert r19650 (implement gc-keep-outputs by looking for derivations
with the same name as the output) and instead use the
  DerivationOutputs table in the database, which is the correct way to
  to do things.
2010-02-22 11:44:17 +00:00
Eelco Dolstra 299ff64812 * Put the derivation outputs in the database. This is useful for the
garbage collector.
2010-02-22 11:15:50 +00:00
Eelco Dolstra 1930570ad9 * Foreign key support in SQLite is not a persistent setting, so enable
it at startup.
* Implement negative caching.  Now `make check' passes.
2010-02-19 17:15:22 +00:00
Eelco Dolstra 9c9a88e9e2 * Implement more stuff. 2010-02-19 16:43:25 +00:00
Eelco Dolstra 762cee72cc * Implement registerValidPath(). 2010-02-19 16:04:51 +00:00
Eelco Dolstra 268f9aaf28 * Implemented queryValidPaths() and verifyStore(). 2010-02-18 16:51:27 +00:00
Eelco Dolstra 836e5b6f57 * Implemented queryReferrers(). 2010-02-18 16:21:59 +00:00
Eelco Dolstra 77cb9e3fb1 * Implement queryPathInfo(). 2010-02-18 15:52:57 +00:00
Eelco Dolstra 885e22b16e * Implement isValidPath(). 2010-02-18 15:11:08 +00:00
Eelco Dolstra cfb09e0fad * Automatically abort transactions if they go out of scope without
committing.
2010-02-18 14:40:07 +00:00
Eelco Dolstra e0305bb7a8 * Some wrapper objects to ensure that SQLite objects are properly
destroyed.
2010-02-18 14:30:42 +00:00
Eelco Dolstra a053d2d8e5 * Add the deriver to the ValidPaths table. In principle we could now
store all the derivers of a path efficiently.  But that opens a big
  can of worms with respect to garbage collector semantics.
2010-02-18 13:48:18 +00:00
Eelco Dolstra dbddac0fe9 * Assign an integer id to every row in the ValidPaths table in order
to make the Refs table more space-efficient.  For instance, this
  reduces the size of the database on my laptop from 93 MiB to 18
  MiB.  (It was 72 MiB with the old schema on an ext3 disk with a 1
  KiB block size.)
2010-02-18 13:40:46 +00:00
Eelco Dolstra c1a07f9445 * Convert the Nix database to SQLite. 2010-02-18 13:16:59 +00:00
Eelco Dolstra 07ffdc2862 * Added an option "fsync-metadata" to fsync() changes to
/nix/var/nix/db.
* Removed the function writeStringToFile since it does (almost) the
  same thing as writeFile.
2010-01-29 12:22:58 +00:00
Eelco Dolstra ad529fb89f * Don't consider a store path valid if its info file exists but is
zero bytes long.  That makes Nix more robust in case of crashes
  (especially on ext4).
2010-01-29 11:53:58 +00:00
Eelco Dolstra 327a232c85 * Remove support for old (before Nix 0.12pre12020) databases. 2009-11-06 01:15:44 +00:00
Eelco Dolstra c7057fc1f2 * And some more. 2009-09-24 07:39:55 +00:00
Eelco Dolstra 676e07902e * Darwin hack. 2009-09-23 18:04:55 +00:00
Eelco Dolstra 64e89980e8 * Create some state directories automatically as a convenience. 2009-09-23 17:05:51 +00:00
Eelco Dolstra 14bc3ce3d6 * Canonicalise timestamps in the Nix store to 1 (1970-01-01 00:00:01
UTC) rather than 0 (00:00:00).  1 is a better choice because some
  programs use 0 as a special value.  For instance, the Template
  Toolkit uses a timestamp of 0 to denote the non-existence of a file,
  so it barfs on files in the Nix store (see
  template-toolkit-nix-store.patch in Nixpkgs).  Similarly, Maya 2008
  fails to load script directories with a timestamp of 0 and can't be
  patched because it's closed source.

  This will also shut up those "implausibly old time stamp" GNU tar
  warnings.
2009-06-13 16:30:58 +00:00
Eelco Dolstra d5eab2fc82 * Use foreach in a lot of places. 2009-04-21 11:52:16 +00:00
Eelco Dolstra 8f1bf28505 * nix-store --verify: don't bail out if a referenced path is missing.
(It can't fix it though.)
2009-04-21 11:06:27 +00:00
Eelco Dolstra 4e646b0ddb * Fix a few "comparison is always false/true due to limited range of
data type" warnings on 64-bit platforms.  The one in parser.y is
  likely to be a real bug.
2009-04-16 12:03:17 +00:00
Eelco Dolstra c7152c8f97 * Don't use the non-standard __gnu_cxx::stdio_filebuf class. 2009-03-28 19:41:53 +00:00
Eelco Dolstra cb85bc396e * Create /nix/store if it doesn't exist. 2009-03-27 14:19:04 +00:00
Eelco Dolstra 92f525ecf4 * Negative caching, i.e. caching of build failures. Disabled by
default.  This is mostly useful for Hydra.
2009-03-25 21:05:42 +00:00
Eelco Dolstra 77d272623f * NAR archives: handle files larger than 2^32 bytes. Previously it
would just silently store only (fileSize % 2^32) bytes.
* Use posix_fallocate if available when unpacking archives.
* Provide a better error message when trying to unpack something that
  isn't a NAR archive.
2009-03-22 17:36:43 +00:00
Eelco Dolstra b682fae9d9 * Build hooks: use nix-store --import. This prevents a redundant
scan for runtime dependencies (i.e. the local machine shouldn't do a
  scan that the remote machine has already done).  Also pipe directly
  into `nix-store --import': don't use a temporary file.
2009-02-02 17:24:10 +00:00
Eelco Dolstra 8fce03e0ad * nix-store --verify: repair bad hash fields in the metadata file. 2008-12-16 13:28:18 +00:00
Eelco Dolstra 82ae85de27 * addToStore() in nix-worker: don't write the NAR dump received from
the client to a temporary directory, as that is highly inefficient.
2008-12-03 18:05:14 +00:00
Eelco Dolstra ff762fb499 * Pass HashType values instead of strings. 2008-12-03 16:10:17 +00:00
Eelco Dolstra 1307b22223 * Made addToStore() a lot more efficient: it no longer reads the path
being copied 3 times in the worst case.  It doesn't run in constant space,
  but it didn't do that anyway.
2008-12-03 15:51:17 +00:00
Eelco Dolstra 64519cfd65 * Unify the treatment of sources copied to the store, and recursive
SHA-256 outputs of fixed-output derivations.  I.e. they now produce
  the same store path:

  $ nix-store --add x
  /nix/store/j2fq9qxvvxgqymvpszhs773ncci45xsj-x

  $ nix-store --add-fixed --recursive sha256 x
  /nix/store/j2fq9qxvvxgqymvpszhs773ncci45xsj-x

  the latter being the same as the path that a derivation

    derivation {
      name = "x";
      outputHashAlgo = "sha256";
      outputHashMode = "recursive";
      outputHash = "...";
      ...
    };

  produces.

  This does change the output path for such fixed-output derivations.
  Fortunately they are quite rare.  The most common use is fetchsvn
  calls with SHA-256 hashes.  (There are a handful of those is
  Nixpkgs, mostly unstable development packages.)
  
* Documented the computation of store paths (in store-api.cc).
2008-12-03 15:06:30 +00:00
Eelco Dolstra e13da525a7 * Files in the info directory starting with "." are temporary files
and don't indicate path validity.
2008-11-19 16:27:07 +00:00
Eelco Dolstra 98b07466fb * Better error checking of the data from the substituters. 2008-08-05 10:57:53 +00:00
Eelco Dolstra 5adbb0aabe * build.cc: only use a substituter if it returns info for a path. 2008-08-04 13:15:35 +00:00
Eelco Dolstra c4f98941ed * nix-env --dry-run: show the total size of the substituter
downloads.
2008-08-04 12:29:04 +00:00
Eelco Dolstra 3c92ea399d * Make nix-env --dry-run print the paths to be substituted correctly
again.  (After the previous substituter mechanism refactoring I
  didn't update the code that obtains the references of substitutable
  paths.)  This required some refactoring: the substituter programs
  are now kept running and receive/respond to info requests via
  stdin/stdout.
2008-08-02 12:54:35 +00:00
Eelco Dolstra 989176c56e * Allow read-only access to the store (e.g., non-root users on NixOS
can do operations like "nix-store -qR <path>" even without the Nix
  daemon).
2008-07-18 15:34:46 +00:00
Eelco Dolstra a72709afd8 * Some refactoring: put the GC options / results in separate structs.
* The garbage collector now also prints the number of blocks freed.
2008-06-18 09:34:17 +00:00
Eelco Dolstra b0e92f6d47 * Merged the no-bdb branch (-r10900:HEAD
https://svn.nixos.org/repos/nix/nix/branches/no-bdb).
2008-06-09 13:52:45 +00:00
Eelco Dolstra f789ea1d09 * A transaction is unnecessary since the path cannot be
garbage-collected (it's a temporary root).
2008-03-01 21:05:33 +00:00
Eelco Dolstra 66c51dc215 * nix-store --dump-db / --load-db to dump/load the Nix DB.
* nix-store --register-validity: option to supply the content hash of
  each path.
* Removed compatibility with Nix <= 0.7 stores.
2008-01-29 18:17:36 +00:00
Eelco Dolstra d04291cfab * Doh! Don't change the permissions on /nix/store. 2007-10-10 13:52:38 +00:00
Eelco Dolstra 315183f194 * nix-store --optimise: flag "--dry-run" to just query what the disk
savings would be.
2007-10-10 13:43:04 +00:00
Eelco Dolstra a8629de827 * New command `nix-store --optimise' to reduce Nix store disk space
usage by finding identical files in the store and hard-linking them
  to each other.  It typically reduces the size of the store by
  something like 25-35%.  This is what the optimise-store.pl script
  did, but the new command is faster and more correct (it's safe wrt
  garbage collection and concurrent builds).
2007-10-09 22:14:27 +00:00
Eelco Dolstra 3757ee589f * Bump the Nix database schema version number; delete the substitutes
table.
2007-08-13 11:37:39 +00:00
Eelco Dolstra 9e975458b4 * Get rid of the substitutes database table (NIX-47). Instead, if we
need any info on substitutable paths, we just call the substituters
  (such as download-using-manifests.pl) directly.  This means that
  it's no longer necessary for nix-pull to register substitutes or for
  nix-channel to clear them, which makes those operations much faster
  (NIX-95).  Also, we don't have to worry about keeping nix-pull
  manifests (in /nix/var/nix/manifests) and the database in sync with
  each other.

  The downside is that there is some overhead in calling an external
  program to get the substitutes info.  For instance, "nix-env -qas"
  takes a bit longer.

  Abolishing the substitutes table also makes the logic in
  local-store.cc simpler, as we don't need to store info for invalid
  paths.  On the downside, you cannot do things like "nix-store -qR"
  on a substitutable but invalid path (but nobody did that anyway).

* Never catch interrupts (the Interrupted exception).
2007-08-12 00:29:28 +00:00
Eelco Dolstra 6d1a1191b0 * Support queryDeriver() in multi-user installations. 2007-06-12 16:53:44 +00:00
Eelco Dolstra cbfac2fdcc * Set a terminate() handler to ensure that we leave the BDB
environment cleanly even when an exception is thrown from a
  destructor.  We still crash, but we don't take all other Nix
  processes with us.
2007-05-01 15:16:17 +00:00
Eelco Dolstra 644946feed * Make --verify more interruptable. 2007-05-01 13:21:05 +00:00
Eelco Dolstra ae7990cc88 * Work around a bug in Apple's GCC preprocessor. 2007-03-30 13:24:35 +00:00
Eelco Dolstra db1973d012 * Look for the openssl program at compile time. If not found, call
openssl through $PATH at runtime.
2007-03-01 13:30:46 +00:00
Eelco Dolstra b4a040e52b * Don't check the signature unless we have to. 2007-03-01 12:30:24 +00:00
Eelco Dolstra 2ea3bebc23 * Doh! The deriver can be empty. 2007-02-27 23:18:57 +00:00
Eelco Dolstra 65f195f4c7 * Check that the file containing the secret key is secret. 2007-02-21 17:51:10 +00:00
Eelco Dolstra dc7d594776 * importPath(): set the deriver.
* exportPath(): lock the path, use a transaction.
2007-02-21 16:23:25 +00:00
Eelco Dolstra 43c4d18c6a * nix-store --import': import an archive created by nix-store
--export' into the Nix store, and optionally check the cryptographic
  signatures against /nix/etc/nix/signing-key.pub.  (TODO: verify
  against a set of public keys.)
2007-02-21 15:45:32 +00:00
Eelco Dolstra 46e0919ced * `nix-store --export --sign': sign the Nix archive using the RSA key
in /nix/etc/nix/signing-key.sec
2007-02-21 14:31:42 +00:00
Eelco Dolstra b824a1daee * Start of `nix-store --export' operation for serialising a store
path.  This is like `nix-store --dump', only it also dumps the
  meta-information of the store path (references, deriver).  Will add
  a `--sign' flag later to add a cryptographic signature, which we
  will use for exchanging store paths between build farm machines in a
  secure manner.
2007-02-20 23:17:20 +00:00
Eelco Dolstra 46605fb4f5 * Fix 64-bit compiler warnings. 2007-02-06 20:03:53 +00:00
Eelco Dolstra b618fa6eb6 * computeStorePathForText: take the references into account when
computing the store path (NIX-77).  This is an important security
  property in multi-user Nix stores.

  Note that this changes the store paths of derivations (since the
  derivation aterms are added using addTextToStore), but not most
  outputs (unless they use builtins.toFile).
2007-01-29 15:51:37 +00:00
Eelco Dolstra 63f3ce6d9a * `nix-store --verify': revive checking the referrers table. This is
important to get garbage collection to work if there is any
  inconsistency in the database (because the referrer table is used to
  determine whether it is safe to delete a path).
* `nix-store --verify': show some progress.
2007-01-14 17:28:30 +00:00
Eelco Dolstra 8f67b35886 * Make the garbage collector more resilient to certain consistency
errors: in-use paths now cause a warning, not a fatal error.
2007-01-14 16:24:49 +00:00
Eelco Dolstra a3e6415ba8 * New primop builtins.filterSource, which can be used to filter files
from a source directory.  All files for which a predicate function
  returns true are copied to the store.  Typical example is to leave
  out the .svn directory:

    stdenv.mkDerivation {
      ...
      src = builtins.filterSource
        (path: baseNameOf (toString path) != ".svn")
        ./source-dir;
      # as opposed to
      #   src = ./source-dir;
    }

  This is important because the .svn directory influences the hash in
  a rather unpredictable and variable way.
2006-12-12 23:05:01 +00:00
Eelco Dolstra b17677462c * Use lchown() instead of chown() in canonicalisePathMetaData(). This
matters when running as root, since then we don't use the setuid
  helper (which already used lchown()).
  
* Also check for an obscure security problem on platforms that don't
  have lchown.  Then we can't change the ownership of symlinks, which
  doesn't matter *except* when the containing directory is writable by
  the owner (which is the case with the top-level Nix store directory).
2006-12-09 20:02:27 +00:00
Eelco Dolstra 5f681988f2 * Use deletePathWrapped() in more places. 2006-12-09 00:26:24 +00:00
Eelco Dolstra ec23ecc64d * In the garbage collector, if deleting a path fails, try to fix its
ownership, then try again.
2006-12-07 15:54:52 +00:00
Eelco Dolstra a0a43c3206 * When not running as root, call the setuid helper to change the
ownership of the build result after the build.
2006-12-07 15:18:14 +00:00
Eelco Dolstra a9c4f66cfb * Allow unprivileged users to run the garbage collector and to do
`nix-store --delete'.  But unprivileged users are not allowed to
  ignore liveness.
* `nix-store --delete --ignore-liveness': ignore the runtime roots as
  well.
2006-12-05 02:18:46 +00:00
Eelco Dolstra 35247c4c9f * Removed `build-allow-root'.
* Added `build-users-group', the group under which builds are to be
  performed.
* Check that /nix/store has 1775 permission and is owner by the
  build-users-group.
2006-12-03 15:32:38 +00:00
Eelco Dolstra 9c9cdb06d0 * Remove SwitchToOriginalUser, we're not going to need it anymore. 2006-12-02 14:34:14 +00:00
Eelco Dolstra a824d58b56 * Merge addToStore and addToStoreFixed.
* addToStore now adds unconditionally, it doesn't use readOnlyMode.
  Read-only operation is up to the caller (who can call
  computeStorePathForPath).
2006-12-01 20:51:18 +00:00
Eelco Dolstra b0d8e05be1 * More operations.
* addToStore() and friends: don't do a round-trip to the worker if
  we're only interested in the path (i.e., in read-only mode).
2006-12-01 18:00:01 +00:00
Eelco Dolstra 0565b5f2b3 * More remote operations.
* Added new operation hasSubstitutes(), which is more efficient than
  querySubstitutes().size() > 0.
2006-11-30 22:43:55 +00:00
Eelco Dolstra 40b3f64b55 * Skeleton of the privileged worker program.
* Some refactoring: put the NAR archive integer/string serialisation
  code in a separate file so it can be reused by the worker protocol
  implementation.
2006-11-30 19:19:59 +00:00
Eelco Dolstra 9cf1948993 * Skeleton of remote store implementation. 2006-11-30 18:35:36 +00:00
Eelco Dolstra e2ef5e07fd * Refactoring. There is now an abstract interface class StoreAPI
containing functions that operate on the Nix store.  One
  implementation is LocalStore, which operates on the Nix store
  directly.  The next step, to enable secure multi-user Nix, is to
  create a different implementation RemoteStore that talks to a
  privileged daemon process that uses LocalStore to perform the actual
  operations.
2006-11-30 17:43:04 +00:00
Renamed from src/libstore/store.cc (Browse further)