lix/doc/manual/command-ref/env-common.xml
Jonas Chevalier 895516cadf
add NIX_USER_CONF_FILES
Motivation: maintain project-level configuration files.

Document the whole situation a bit better so that it corresponds to the
implementation, and add NIX_USER_CONF_FILES that allows overriding
which user files Nix will load during startup.
2020-04-14 18:45:06 +02:00

210 lines
6.8 KiB
XML
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<chapter xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-common-env">
<title>Common Environment Variables</title>
<para>Most Nix commands interpret the following environment variables:</para>
<variablelist xml:id="env-common">
<varlistentry><term><envar>IN_NIX_SHELL</envar></term>
<listitem><para>Indicator that tells if the current environment was set up by
<command>nix-shell</command>. Since Nix 2.0 the values are
<literal>"pure"</literal> and <literal>"impure"</literal></para></listitem>
</varlistentry>
<varlistentry xml:id="env-NIX_PATH"><term><envar>NIX_PATH</envar></term>
<listitem>
<para>A colon-separated list of directories used to look up Nix
expressions enclosed in angle brackets (i.e.,
<literal>&lt;<replaceable>path</replaceable>></literal>). For
instance, the value
<screen>
/home/eelco/Dev:/etc/nixos</screen>
will cause Nix to look for paths relative to
<filename>/home/eelco/Dev</filename> and
<filename>/etc/nixos</filename>, in this order. It is also
possible to match paths against a prefix. For example, the value
<screen>
nixpkgs=/home/eelco/Dev/nixpkgs-branch:/etc/nixos</screen>
will cause Nix to search for
<literal>&lt;nixpkgs/<replaceable>path</replaceable>></literal> in
<filename>/home/eelco/Dev/nixpkgs-branch/<replaceable>path</replaceable></filename>
and
<filename>/etc/nixos/nixpkgs/<replaceable>path</replaceable></filename>.</para>
<para>If a path in the Nix search path starts with
<literal>http://</literal> or <literal>https://</literal>, it is
interpreted as the URL of a tarball that will be downloaded and
unpacked to a temporary location. The tarball must consist of a
single top-level directory. For example, setting
<envar>NIX_PATH</envar> to
<screen>
nixpkgs=https://github.com/NixOS/nixpkgs-channels/archive/nixos-15.09.tar.gz</screen>
tells Nix to download the latest revision in the Nixpkgs/NixOS
15.09 channel.</para>
<para>A following shorthand can be used to refer to the official channels:
<screen>nixpkgs=channel:nixos-15.09</screen>
</para>
<para>The search path can be extended using the <option
linkend="opt-I">-I</option> option, which takes precedence over
<envar>NIX_PATH</envar>.</para></listitem>
</varlistentry>
<varlistentry><term><envar>NIX_IGNORE_SYMLINK_STORE</envar></term>
<listitem>
<para>Normally, the Nix store directory (typically
<filename>/nix/store</filename>) is not allowed to contain any
symlink components. This is to prevent “impure” builds. Builders
sometimes “canonicalise” paths by resolving all symlink components.
Thus, builds on different machines (with
<filename>/nix/store</filename> resolving to different locations)
could yield different results. This is generally not a problem,
except when builds are deployed to machines where
<filename>/nix/store</filename> resolves differently. If you are
sure that youre not going to do that, you can set
<envar>NIX_IGNORE_SYMLINK_STORE</envar> to <envar>1</envar>.</para>
<para>Note that if youre symlinking the Nix store so that you can
put it on another file system than the root file system, on Linux
youre better off using <literal>bind</literal> mount points, e.g.,
<screen>
$ mkdir /nix
$ mount -o bind /mnt/otherdisk/nix /nix</screen>
Consult the <citerefentry><refentrytitle>mount</refentrytitle>
<manvolnum>8</manvolnum></citerefentry> manual page for details.</para>
</listitem>
</varlistentry>
<varlistentry><term><envar>NIX_STORE_DIR</envar></term>
<listitem><para>Overrides the location of the Nix store (default
<filename><replaceable>prefix</replaceable>/store</filename>).</para></listitem>
</varlistentry>
<varlistentry><term><envar>NIX_DATA_DIR</envar></term>
<listitem><para>Overrides the location of the Nix static data
directory (default
<filename><replaceable>prefix</replaceable>/share</filename>).</para></listitem>
</varlistentry>
<varlistentry><term><envar>NIX_LOG_DIR</envar></term>
<listitem><para>Overrides the location of the Nix log directory
(default <filename><replaceable>prefix</replaceable>/var/log/nix</filename>).</para></listitem>
</varlistentry>
<varlistentry><term><envar>NIX_STATE_DIR</envar></term>
<listitem><para>Overrides the location of the Nix state directory
(default <filename><replaceable>prefix</replaceable>/var/nix</filename>).</para></listitem>
</varlistentry>
<varlistentry><term><envar>NIX_CONF_DIR</envar></term>
<listitem><para>Overrides the location of the system Nix configuration
directory (default
<filename><replaceable>prefix</replaceable>/etc/nix</filename>).</para></listitem>
</varlistentry>
<varlistentry><term><envar>NIX_USER_CONF_FILES</envar></term>
<listitem><para>Overrides the location of the user Nix configuration files
to load from (defaults to the XDG spec locations). The variable is treated
as a list separated by the <literal>:</literal> token.</para></listitem>
</varlistentry>
<varlistentry><term><envar>TMPDIR</envar></term>
<listitem><para>Use the specified directory to store temporary
files. In particular, this includes temporary build directories;
these can take up substantial amounts of disk space. The default is
<filename>/tmp</filename>.</para></listitem>
</varlistentry>
<varlistentry xml:id="envar-remote"><term><envar>NIX_REMOTE</envar></term>
<listitem><para>This variable should be set to
<literal>daemon</literal> if you want to use the Nix daemon to
execute Nix operations. This is necessary in <link
linkend="ssec-multi-user">multi-user Nix installations</link>.
If the Nix daemon's Unix socket is at some non-standard path,
this variable should be set to <literal>unix://path/to/socket</literal>.
Otherwise, it should be left unset.</para></listitem>
</varlistentry>
<varlistentry><term><envar>NIX_SHOW_STATS</envar></term>
<listitem><para>If set to <literal>1</literal>, Nix will print some
evaluation statistics, such as the number of values
allocated.</para></listitem>
</varlistentry>
<varlistentry><term><envar>NIX_COUNT_CALLS</envar></term>
<listitem><para>If set to <literal>1</literal>, Nix will print how
often functions were called during Nix expression evaluation. This
is useful for profiling your Nix expressions.</para></listitem>
</varlistentry>
<varlistentry><term><envar>GC_INITIAL_HEAP_SIZE</envar></term>
<listitem><para>If Nix has been configured to use the Boehm garbage
collector, this variable sets the initial size of the heap in bytes.
It defaults to 384 MiB. Setting it to a low value reduces memory
consumption, but will increase runtime due to the overhead of
garbage collection.</para></listitem>
</varlistentry>
</variablelist>
</chapter>