readline is not re-entrant, so entering the debugger from the
completioncallback results in an eventual segfault.
The workaround is to temporarily disable the debugger when searching
for possible completions.
Call it as `['nix', '__build-remote', ... ]` rather than the previous
`["__build-remote", "nix __build-remote", ... ]` which seemed to have
been most likely unintended
The description of the --profile option talks about the "update" operation.
This is probably meant for operations such as "nix profile install", but the
same option is reused in other subcommands, which do not update the profile,
such as "nix profile {list,history,diff-closures}".
We update the description to make sense in both contexts.
Currently, Nix passes `-a` when it runs commands on a remote machine via
SSH, which disables agent forwarding. This causes issues when the
`ForwardAgent` option is set in SSH config files, as the command line
operation always overrides those.
In particular, this causes issues if the command being run is `sudo`
and the remote machine is configured with the equivalent of NixOS's
`security.pam.enableSSHAgentAuth` option. Not allowing SSH agent
forwarding can cause authentication to fail unexpectedly.
This can currently be worked around by setting `NIX_SSHOPTS="-A"`, but
we should defer to the options in the SSH config files to be least
surprising for users.
After we've send "\2\n" to the parent, we can't send a serialized
exception anymore. It will show up garbled like
$ nix-build --store /tmp/nix --expr 'derivation { name = "foo"; system = "x86_64-linux"; builder = "/foo/bar"; }'
this derivation will be built:
/nix/store/xmdip0z5x1zqpp6gnxld3vqng7zbpapp-foo.drv
building '/nix/store/xmdip0z5x1zqpp6gnxld3vqng7zbpapp-foo.drv'...
ErrorErrorEexecuting '/foo/bar': No such file or directory
error: builder for '/nix/store/xmdip0z5x1zqpp6gnxld3vqng7zbpapp-foo.drv' failed with exit code 1
While trying to use an alternate directory for my Nix installation, I
noticed that nix's output didn't reflect the updated state
directory. This patch corrects that and now prints the warning before
attempting to create the directory (if the directory creation fails,
it wouldn't have been obvious why nix was attempting to create the
directory in the first place).
With this patch, I now get the following warning:
warning: '/home/deck/.var/app/org.nixos.nix/var/nix' does not
exist, so Nix will use '/home/deck/.local/share/nix/root' as a
chroot store
The documentation for `parseDrvName` does not agree with the implementation when
the derivation name contains a dash which is followed by something that is
neither a letter nor a digit. This commit corrects the documentation to agree
with the implementation.
If we don't have any github token, we won't be able to fetch private
repos, but we are also more likely to run into API limits since
we don't have a token. To mitigate this only ever use the github api
if we actually have a token.
The current definition of `intersectAttrs` is incorrect:
> Return a set consisting of the attributes in the set e2 that also exist in the
> set e1.
Recall that (Nix manual, section 5.1):
> An attribute set is a collection of name-value-pairs (called attributes)
According to the existing description of `intersectAttrs`, the following should
evaluate to the empty set, since no key-value *pair* (i.e. attribute) exists in
both sets:
```
builtins.intersectAttrs { x=3; } {x="foo";}
```
And yet:
```
nix-repl> builtins.intersectAttrs { x=3; } {x="foo";}
{ x = "foo"; }
```
Clearly the intent here was for the *names* of the resulting attribute set to be
the intersection of the *names* of the two arguments, and for the values of the
resulting attribute set to be the values from the second argument.
This commit corrects the definition, making it match the implementation and intent.
Make sure that people who run Nix in non-interactive mode (and so don't have the possibility to interactively accept the individual flake configuration settings) are aware of this flag.
Fix#7086
These settings seem harmless, they control the same polling
functionality that timeout does, but with different behavior. Should
be safe for untrusted users to pass in.
I just had a colleague get confused by the previous phrase for good
reason. "valid" sounds like an *objective* criterion, e.g. and *invalid
signature* would be one that would be trusted by no one, e.g. because it
misformatted or something.
What is actually going is that there might be a signature which is
perfectly valid to *someone else*, but not to the user, because they
don't trust the corresponding public key. This is a *subjective*
criterion, because it depends on the arbitrary and personal choice of
which public keys to trust.
I therefore think "trustworthy" is a better adjective to use. Whether
something is worthy of trust is clearly subjective, and then "trust"
within that word nicely evokes `trusted-public-keys` and friends.
The history is not critical to the functionality of nix repl, so it's
enough to warn here, rather than refuse to start if the directory Nix
thinks the history should live in can't be created.
- call close explicitly in writeFile to prevent the close exception
from being ignored
- fsync after writing schema file to flush data to disk
- fsync schema file parent to flush metadata to disk
https://github.com/NixOS/nix/issues/7064
Remove the `verify TLS: Nix CA file = 'blah'` message that Nix used to print when fetching anything as it's both useless (`libcurl` prints the same info in its logs) and misleading (gives the impression that a new TLS connection is being established which might not be the case because of multiplexing. See #7011 )
This commit adds an optional `__impure` parameter to fetchurl.nix, which allows
the caller to use `libfetcher`'s fetcher in an impure derivation. This allows
nixpkgs' patch-normalizing fetcher (fetchpatch) to be rewritten to use nix's
internal fetchurl, thereby eliminating the awkward "you can't use fetchpatch
here" banners scattered all over the place.
See also: https://github.com/NixOS/nixpkgs/pull/188587
Implements the approach suggested by feedback on PR #6994, where
tempdir paths are created in the store (now with an exclusive lock).
As part of this work, the currently-broken and unused
`createTempDirInStore` function is updated to create an exclusive lock
on the temp directory in the store.
The GC now makes a non-blocking attempt to lock any store directories
that "look like" the temp directories created by this function, and if
it can't acquire one, ignores the directory.
Stdenv sets this to a bash that doesn't have readline/completion
support, so running 'nix (develop|shell)' inside a 'nix develop' gives
you a crippled shell. So let's just ignore the derivation's $SHELL.
This could break interactive use of build phases that use $SHELL, but
they appear to be fairly rare.
Disables the SA_RESTART behavior on macOS which causes:
> Restarting of pending calls is requested by setting the SA_RESTART bit
> in sa_flags. The affected system calls include read(2), write(2),
> sendto(2), recvfrom(2), sendmsg(2) and recvmsg(2) on a communications
> channel or a slow device (such as a terminal, but not a regular file)
> and during a wait(2) or ioctl(2).
From: https://man.openbsd.org/sigaction#SA_RESTART
This being set on macOS caused a bug where read() calls to the daemon
socket were blocking after a SIGINT was received. As a result,
checkInterrupt was never reached even though the signal was received
by the signal handler thread.
On Linux, SA_RESTART is disabled by default. This probably effects
other BSDs but I don’t have the ability to test it there right now.
readDerivation is pretty slow, and while it may not be significant for
some use cases, on things like ghc-nix where we have thousands of
derivations is really slows things down.
So, this just doesn’t do the impure derivation check if the impure
derivation experimental feature is disabled. Perhaps we could cache
the result of isPure() and keep the check, but this is a quick fix to
for the slowdown introduced with impure derivations features in 2.8.0.
this simplifies the setup a lot, and avoids weird looking `./file.md`
links showing up.
it also does not show regular URLs any more. currently the command
reference only has few of them, and not showing them in the offline
documentation is hopefully not a big deal.
instead of building more special-case solutions, clumsily preprocessing
the input, or issuing verbal rules on dealing with URLs, should better
be solved sustainably by not rendering relative links in `lowdown`:
https://github.com/kristapsdz/lowdown/issues/105
This was caused by -L calling setLogFormat() again, which caused the
creation of a new progress bar without destroying the old one. So we
had two progress bars clobbering each other.
We should change 'logger' to be a smart pointer, but I'll do that in a
future PR.
Fixes#6931.
98e361ad4c introduced a regression where
previously stored attributes were replaced by placeholders. As a
result, a command like 'nix build nixpkgs#hello' had to be executed at
least twice to get caching.
This code does not seem necessary for suggestions to work.
This issue made it impossible for clients using a serve protocol of
version <= 2.3 to use the `cmdBuildDerivation` command of servers using
a protocol of version >= 2.6. The faulty version check makes the server
send back build outputs that the client is not expecting.
This hang for some reason didn't trigger in the Nix build, but did
running 'make installcheck' interactively. What happened:
* Store::addMultipleToStore() calls a SinkToSource object to copy a
path, which in turn calls LegacySSHStore::narFromPath(), which
acquires a connection.
* The SinkToSource object is not destroyed after the last bytes has
been read, so the coroutine's stack is still alive and its
destructors are not run. So the connection is not released.
* Then when the next path is copied, because max-connections = 1,
LegacySSHStore::narFromPath() hangs forever waiting for a connection
to be released.
The fix is to make sure that the source object is destroyed when we're
done with it.
Makes `printValueAsJSON` not copy paths to the store for `nix eval
--json`, `nix-instantiate --eval --json` and `nix-env --json`.
Fixes https://github.com/NixOS/nix/issues/5612
RewritingSink can handle being fed input where a reference crosses a
chunk boundary. we don't need to load the whole source into memory, and
in fact *not* loading the whole source lets nix build FODs that do not
fit into memory (eg fetchurl'ing data files larger than system memory).
Some activities are numerous but usually very short (e.g. copying a
source file to the store) which would cause a lot of flickering. So
only show activities that have been running for at least 10 ms.
Rather than directly copying the source to its dest, copy it first to a
temporary location, and eventually move that temporary.
That way, the move is at least atomic from the point-of-view of the destination
The recursive copy from the stl doesn’t exactly do what we need because
1. It doesn’t delete things as we go
2. It doesn’t keep the mtime, which change the nars
So re-implement it ourselves. A bit dull, but that way we have what we want
In `nix::rename`, if the call to `rename` fails with `EXDEV` (failure
because the source and the destination are in a different filesystems)
switch to copying and removing the source.
To avoid having to re-implement the copy manually, I switched the
function to use the c++17 `filesystem` library (which has a `copy`
function that should do what we want).
Fix#6262
Once a derivation goal has been completed, we check whether or not
this goal was meant to be repeated to check its output.
An early return branch was preventing the worker to reach that repeat
code branch, hence breaking the --check command (#2619).
It seems like this early return branch is an artifact of a passed
refactoring. As far as I can tell, buildDone's main branch also
cleanup the tmp directory before returning.
By default, Nix sets the "cores" setting to the number of CPUs which are
physically present on the machine. If cgroups are used to limit the CPU
and memory consumption of a large Nix build, the OOM killer may be
invoked.
For example, consider a GitLab CI pipeline which builds a large software
package. The GitLab runner spawns a container whose CPU is limited to 4
cores and whose memory is limited to 16 GiB. If the underlying machine
has 64 cores, Nix will invoke the build with -j64. In many cases, that
level of parallelism will invoke the OOM killer and the build will
completely fail.
This change sets the default value of "cores" to be
ceil(cpu_quota / cpu_period), with a fallback to
std:🧵:hardware_concurrency() if cgroups v2 is not detected.
The workaround for "Some distros patch Linux" mentioned in
local-derivation-goal.cc will not help in the `--option
sandbox-fallback false` case. To provide the user more helpful
guidance on how to get the sandbox working, let's check to see if the
`/proc` node created by the aforementioned patch is present and
configured in a way that will cause us problems. If so, give the user
a suggestion for how to troubleshoot the problem.
local-derivation-goal.cc contains a comment stating that "Some distros
patch Linux to not allow unprivileged user namespaces." Let's give a
pointer to a common version of this patch for those who want more
details about this failure mode.
This commit causes nix to `warn()` if sandbox setup has failed and
`/proc/self/ns/user` does not exist. This is usually a sign that the
kernel was compiled without `CONFIG_USER_NS=y`, which is required for
sandboxing.
This commit uses `warn()` to notify the user if sandbox setup fails
with errno==EPERM and /proc/sys/user/max_user_namespaces is missing or
zero, since that is at least part of the reason why sandbox setup
failed.
Note that `echo -n 0 > /proc/sys/user/max_user_namespaces` or
equivalent at boot time has been the recommended mitigation for
several Linux LPE vulnerabilities over the past few years. Many users
have applied this mitigation and then forgotten that they have done
so.
The failure modes for nix's sandboxing setup are pretty complicated.
When nix is unable to set up the sandbox, let's provide more detail
about what went wrong. Specifically:
* Make sure the error message includes the word "sandbox" so the user
knows that the failure was related to sandboxing.
* If `--option sandbox-fallback false` was provided, and removing it
would have allowed further attempts to make progress, let the user
know.
I recently got fairly confused why the following expression didn't have
any effect
{
description = "Foobar";
inputs.sops-nix = {
url = github:mic92/sops-nix;
inputs.nixpkgs_22_05.follows = "nixpkgs";
};
}
until I found out that the input was called `nixpkgs-22_05` (please note
the dash vs. underscore).
IMHO it's not a good idea to not throw an error in that case and
probably leave end-users rather confused, so I implemented a small check
for that which basically checks whether `follows`-declaration from
overrides actually have corresponding inputs in the transitive flake.
In fact this was done by accident already in our own test-suite where
the removal of a `follows` was apparently forgotten[1].
Since the key of the `std::map` that holds the `overrides` is a vector
and we have to find the last element of each vector (i.e. the override)
this has to be done with a for loop in O(n) complexity with `n` being
the total amount of overrides (which shouldn't be that large though).
Please note that this doesn't work with nested expressions, i.e.
inputs.fenix.inputs.nixpkgs.follows = "...";
which is a known problem[2].
For the expression demonstrated above, an error like this will be
thrown:
error: sops-nix has a `follows'-declaration for a non-existant input nixpkgs_22_05!
[1] 2664a216e5
[2] https://github.com/NixOS/nix/issues/5790
Defers completion of flake inputs until the whole command line is parsed
so that we know what flakes we need to complete the inputs of.
Previously, `nix build flake --update-input <Tab>` always behaved like
`nix build . --update-input <Tab>`.
Yorick
Robert Hensing
Jörg Thalheim
Linus Heckemann
Alyssa Ross
Winter Cute
Maximilian Bosch