Commit graph

1168 commits

Author SHA1 Message Date
Eelco Dolstra 691a1bd717 Merge branch 'minimal-logger' of https://github.com/Ma27/nix 2020-08-28 10:50:52 +02:00
Eelco Dolstra 7a02865b94
Move import docs 2020-08-25 14:06:01 +02:00
Eelco Dolstra 0f314f3c25
Generate builtins section of the manual 2020-08-24 14:49:30 +02:00
Eelco Dolstra a990f063ff
Move primop docs inline
This makes them available to 'nix repl'.
2020-08-24 14:31:10 +02:00
Eelco Dolstra 33b1679d75
Allow primops to have Markdown documentation 2020-08-24 13:16:02 +02:00
Eelco Dolstra dc2f278c95
Allow 'nix' subcommands to provide docs in Markdown format 2020-08-20 12:21:46 +02:00
Eelco Dolstra 3c4f8c9175
List deprecated option aliases in the docs 2020-08-20 11:13:17 +02:00
Eelco Dolstra c3e20d8c28
Consistency 2020-08-19 18:30:17 +02:00
Eelco Dolstra c8fa39324a
Generate the nix.conf docs from the source code
This means we don't have two (divergent) sets of option descriptions
anymore.
2020-08-19 18:28:04 +02:00
Eelco Dolstra 8a97b11374
Improve margins between sections
The default CSS puts almost no space between sections, but a lot of
space between subsections. This flips that around.
2020-08-19 12:31:18 +02:00
Eelco Dolstra 069340179e
Improve nix.1 manpage generator 2020-08-18 15:15:35 +02:00
Eelco Dolstra 6f19c776db
Start generation of the nix.1 manpage 2020-08-17 19:33:18 +02:00
Eelco Dolstra 7cdc739ece
Merge remote-tracking branch 'origin/master' into markdown 2020-08-17 13:43:39 +02:00
Matthew Bauer 641c950701 Add hashed-mirrors back
Some users have their own hashed-mirrors setup, that is used to mirror
things in addition to what’s available on tarballs.nixos.org. Although
this should be feasable to do with a Binary Cache, it’s not always
easy, since you have to remember what "name" each of the tarballs has.
Continuing to support hashed-mirrors is cheap, so it’s best to leave
support in Nix. Note that NIX_HASHED_MIRRORS is also supported in
Nixpkgs through fetchurl.nix.

Note that this excludes tarballs.nixos.org from the default, as in
\#3689. All of these are available on cache.nixos.org.
2020-08-06 18:19:09 -05:00
Eelco Dolstra bf290c2306
Merge remote-tracking branch 'origin/master' into markdown 2020-07-31 16:07:04 +02:00
Eelco Dolstra 2ae9ac2369
console -> shell 2020-07-31 16:02:37 +02:00
Eelco Dolstra 1d0a7b54fa
Enable syntax highlighting 2020-07-31 15:43:25 +02:00
Matthew Bauer 05ac4db39a Merge remote-tracking branch 'origin/master' into substitute-other-storedir 2020-07-30 12:38:24 -05:00
Maximilian Bosch 6ccfdb79c7
libutil/logging: extend internal-json logger to make it more machine-readable
The new error-format is pretty nice from a UX point-of-view, however
it's fairly hard to parse the output e.g. for editor plugins such as
vim-ale[1] that use `nix-instantiate --parse` to determine syntax errors in
Nix expression files.

This patch extends the `internal-json` logger by adding the fields
`line`, `column` and `file` to easily locate an error in a file and the
field `raw_msg` which contains the error-message itself without
code-lines and additional helpers.

An exemplary output may look like this:

```
[nix-shell]$ ./inst/bin/nix-instantiate ~/test.nix --log-format minimal
{"action":"msg","column":1,"file":"/home/ma27/test.nix","level":0,"line":4,"raw_msg":"syntax error, unexpected IF, expecting $end","msg":"<full error-msg with code-lines etc>"}
```

[1] https://github.com/dense-analysis/ale
2020-07-26 02:29:57 +02:00
Eelco Dolstra 1308c8404e
Remove DocBook manual 2020-07-24 15:48:40 +02:00
Eelco Dolstra 05a282295f
Fix internal links 2020-07-24 15:46:16 +02:00
Eelco Dolstra da3d776cb9
Fix some dangling references 2020-07-24 14:31:33 +02:00
Eelco Dolstra 4a79b3598f
Fix nix-copy-closure manpage 2020-07-24 13:01:00 +02:00
Eelco Dolstra 7a0e6f076a
Move figures 2020-07-24 12:58:31 +02:00
Eelco Dolstra 758c9ee1bb
Clean up the manpages 2020-07-24 12:56:19 +02:00
Eelco Dolstra 8d0b311a1c
Get rid of footnotes
Markdown doesn't support them.
2020-07-24 11:43:44 +02:00
Eelco Dolstra 69333cb62c
Sigh 2020-07-23 18:27:20 +02:00
Eelco Dolstra 802150f987
<replaceable> -> <emphasis>
Pandoc doesn't know <replaceable> so let's force it to be rendered as
italics.
2020-07-23 18:27:20 +02:00
Eelco Dolstra ee05108472
<simplesect> -> <section>
Pandoc silently ignores <simplesect>...
2020-07-23 18:27:20 +02:00
Eelco Dolstra 136fd55bb2
Get rid of <figure> 2020-07-23 18:27:20 +02:00
Eelco Dolstra ca130b73a0
Get rid of <example>
Markdown doesn't have floats so we can't have this.
2020-07-23 18:27:20 +02:00
Eelco Dolstra 13df1faf25
Get rid of callouts since Markdown doesn't support them 2020-07-23 18:27:20 +02:00
Eelco Dolstra efff6cf163
Install all manpages 2020-07-23 18:27:12 +02:00
Eelco Dolstra 504b7abc45
Convert commands 2020-07-23 18:27:12 +02:00
Eelco Dolstra efdb89994c
Convert nix.conf manpage 2020-07-23 18:27:11 +02:00
Eelco Dolstra f390303566
Reconvert 2020-07-23 18:27:11 +02:00
Eelco Dolstra c20c082383
<envar> -> <literal> 2020-07-23 18:27:11 +02:00
Eelco Dolstra 942cd687f9
Remove libxml2 / libxslt prerequisites 2020-07-23 18:26:48 +02:00
Eelco Dolstra ef606760ab
Pandoc conversion 2020-07-23 18:26:48 +02:00
Eelco Dolstra d004715665
Fix link 2020-07-23 18:26:48 +02:00
Eelco Dolstra 315407c16f
Remove subtitles 2020-07-23 18:26:48 +02:00
Eelco Dolstra ebdc1f6dfb
Typo 2020-07-23 18:26:48 +02:00
Eelco Dolstra 8e41c38867
Remove references to xmllint 2020-07-23 18:26:48 +02:00
Eelco Dolstra e0ea3c82ca
Use mdbook 2020-07-23 18:26:48 +02:00
Eelco Dolstra 650ae14ced
Markdown test 2020-07-23 18:26:48 +02:00
Eelco Dolstra 26fcab53e0
Remove unused file 2020-07-23 18:25:09 +02:00
Jörg Thalheim 6633605341
Update doc/manual/hacking.xml
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
2020-07-20 22:30:39 +01:00
Jörg Thalheim f0100f5590
README: improve development docs 2020-07-20 15:46:28 +01:00
Matthew Bauer bcf8582091 Merge remote-tracking branch 'origin/master' into substitute-other-storedir 2020-06-24 12:52:09 -04:00
Jörg Thalheim 3685f4eec6
docs/installer: add correct curl flags
also see https://nixos.org/download.html
2020-06-23 23:04:10 +01:00
Matthew Bauer 2796b01e86 Merge remote-tracking branch 'origin/master' into substitute-other-storedir 2020-06-19 14:22:06 -04:00
Eelco Dolstra 6c000eed80
Merge pull request #3709 from expipiplus1/master
Mention number of derivations to be build/fetched in output
2020-06-18 19:03:05 +02:00
Samir Talwar 9069759767
Instruct the user to follow redirects when installing Nix.
Nix installation now requires following redirects using `curl -L`. This
is currently represented on the [Nix download page][] but not in the
manual. This change updates the manual to reflect this.

Using `curl` without the `-L` flag results in an empty body, making
installation a no-op.

[Nix download page]: https://nixos.org/download.html
2020-06-18 10:29:24 +02:00
Matthew Bauer 7bd88cc1dc Merge remote-tracking branch 'origin/master' into substitute-other-storedir 2020-06-17 13:32:29 -04:00
Joe Hermaszewski da8aac6ce8 Mention number of derivations to be build/fetched in output
Also correct grammar for the case of a single derivation.
2020-06-17 20:27:27 +08:00
Matthew Bauer 3e3eaa90dd Remove hashed-mirrors 2020-06-12 09:51:44 -05:00
Jonas Chevalier 2c4de6af10 add documentation 2020-06-08 09:31:15 +02:00
Joachim Breitner e2af11ce07 Manpages: Do not refer to nixpkgs-channels
Unless I am misinformed, using the `nixpkgs` repository directly is now
preferred?
2020-05-23 15:26:59 +02:00
Domen Kožar c129e7c8f4
Merge pull request #3212 from LnL7/darwin-10.15-install
install: configure and bootstrap synthetic.conf on darwin
2020-05-23 11:15:31 +02:00
Travis A. Everett 2b0a81d92d
focus on golden-path covering most scenarios
This should handle installation scenarios we can handle with
anything resembling confidence. Goal is approximating the existing
setup--not enforcing a best-practice...

Approaches (+ installer-handled, - manual) and configs each covers:

+ no change needed; /nix OK on boot volume:
  All pre-Catalina (regardless of T2 or FileVault use)

+ create new unencrypted volume:
  Catalina, pre-T2, no FileVault

+ create new encrypted-at-rest volume:
  Catalina, pre-T2, FileVault
  Catalina, T2, no FileVault

- require user to pre-create encrypted volume
  Catalina, T2, FileVault
2020-05-21 19:58:11 +02:00
Daiderd Jordan 477d7c2d07
installer: refuse apfs volume creation when FileVault is enabled 2020-05-21 19:58:11 +02:00
Daiderd Jordan 3386575296
manual: clarify volume creation section 2020-05-21 19:58:11 +02:00
Daiderd Jordan 04f597c3f4
install: improve output and error handling 2020-05-21 19:58:11 +02:00
Daiderd Jordan ee89b7797d
manual: add apfs volume section 2020-05-21 19:58:11 +02:00
Krzysztof Gogolewski c8cb558849 documentation: avoid unquoted URLs 2020-05-21 19:29:13 +02:00
Jörg Thalheim e223eeac09
Remove -j option from simple-build-testing
By default Nix/NixOS already set a reasonable default `max-jobs = auto`
so we don't need to mention it in this tutorial.
The option is still documented in other parts of the documentation
if users ever stumble over this.

Fixes https://github.com/NixOS/nix/issues/2531
2020-05-16 08:45:19 +01:00
Domen Kožar 23e5b48ca4
Merge pull request #3581 from TerrorJack/patch-1
Update "Upgrading Nix" documentation
2020-05-11 18:12:35 +02:00
Domen Kožar 612d57c5de
Merge pull request #3582 from bhipple/doc/fixed-output
doc: consistently refer to 'fixed-output' with a dash
2020-05-11 18:10:19 +02:00
Benjamin Hipple 146f9c114f doc: consistently refer to 'fixed-output' with a dash
General cleanup that makes it easier to search for the term.
2020-05-09 10:58:43 -04:00
Shao Cheng 446649e540
Update "Upgrading Nix" documentation
This PR proposes two changes to the "Upgrading Nix" documentation:

* Besides updating `nixpkgs.nix`, we also update `nixpkgs.cacert`, so that the certificates are up-to-date as well.
* Add the instructions for multi-user mode on Linux.
2020-05-09 15:59:39 +02:00
Dani 52cffafd24
Fix typo 2020-05-09 13:48:31 +02:00
Eelco Dolstra 41caaaad36
Manual: Typo 2020-05-07 16:37:33 +02:00
Eelco Dolstra 479e8bf00b
Manual: Fix typo 2020-05-07 16:08:15 +02:00
Jonas Chevalier 895516cadf
add NIX_USER_CONF_FILES
Motivation: maintain project-level configuration files.

Document the whole situation a bit better so that it corresponds to the
implementation, and add NIX_USER_CONF_FILES that allows overriding
which user files Nix will load during startup.
2020-04-14 18:45:06 +02:00
Eelco Dolstra 55cefd41d6 Merge branch 'fetchgit-recursive' of https://github.com/blitz/nix 2020-04-07 13:45:17 +02:00
Julian Stecklina ea861be292 Add documentation for submodule support in fetchGit 2020-03-29 22:29:57 +02:00
Greg Price e40e01c1dd doc: Files in the store have modes 444/555, not 644/755
This line has been this way since it was written, in 9e08f5efe
in 2006.

I think it was just a small mistake then; Eelco's thesis earlier
that year says the permission on each file is set to 0444 or 0555
in a derivation's output as part of the build process.  In any
case I'm pretty sure that's the behavior now.
2020-03-23 20:23:27 -07:00
jakobrs c5a488afc0 Remove the --delete option for --gc
Running `nix-store --gc --delete` will, as of Nix 2.3.3, simply fail
because the --delete option conflicts with the --delete operation.

  $ nix-store --gc --delete
  error: only one operation may be specified
  Try 'nix-store --help' for more information.

Furthermore, it has been broken since at least Nix 0.16 (which was
released sometime in 2010), which means that any scripts which depend
on it should have been broken at least nine years ago. This commit
simply formally removes the option. There should be no actual difference
in behaviour as far as the user is concerned: it errors with the exact
same error message. The manual has been edited to remove any references
to the (now gone) --delete option.

Other information:
* Path for Nix 0.16 used:
  /nix/store/rp3sgmskn0p0pj1ia2qwd5al6f6pinz4-nix-0.16
2020-03-19 19:41:23 +01:00
Eelco Dolstra 779ef8f5ef
Merge pull request #3380 from contrun/no-attr-path-for-installed
display attr-path only when queried available
2020-03-13 19:26:20 +01:00
YI b6d794fb8d display attr-path only when queried available 2020-03-14 00:36:26 +08:00
Eelco Dolstra 858ad7a4b3 Remove callout graphics
Fixes #3396.
2020-03-13 16:32:43 +01:00
Eelco Dolstra 9c7e90f414
style.css: Remove
This file is licensed under the GPL. Originally, Nix was also
GPL-licensed so that was fine. However, we later changed the license
to the LGPL but missed the fact that style.css has an incompatible
license.

Since the Nix manual at nixos.org uses its own styling, we can remove
this file.

Fixes #3392.
2020-03-13 15:02:32 +01:00
Eelco Dolstra e063c71a79
nixos.org/releases -> releases.nixos.org 2020-03-11 10:33:23 +01:00
Eelco Dolstra 2ba67da053
Merge pull request #3332 from Calvin-L/patch-1
Document that autoconf is a dependency
2020-02-19 13:02:35 +01:00
Eelco Dolstra 16e9a75287 Typo 2020-02-19 12:32:33 +01:00
Benjamin Hipple 762febafe2 doc: mention how to turn on pure evaluation mode in manual
The flag is `--pure-eval`, which can be found by looking at the test suite; it
should be in the notes describing the feature as well, since otherwise users may
assume this is referencing something like `nix-shell --pure`.
2020-02-15 01:44:51 -05:00
Calvin Loncaric 46992e71a1
Document that autoconf is a dependency 2020-01-26 17:22:47 -08:00
Benjamin Hipple 5d24e18e29 doc: touchup release notes for 2.3
- At the top of the release notes, we announce sandboxing is now enabled by default,
then at the bottom it says it's now disabled when missing kernel support. These
can be merged into one point for clarity.

- The point about `max-jobs` defaulting to 1 appears unrelated to sandboxing.
2020-01-14 00:14:03 -05:00
Joe Pea 3895e78794
Add link to official channels in nix-channel command ref 2020-01-09 14:20:08 -08:00
Joe Pea 7ccfa7ca4f
Add a link to official channels in the Channels chapter. 2020-01-09 14:15:19 -08:00
Profpatsch 7923e22276 doc/manual: add ids to the advanced attribute definitions
This makes it possible to reference single attribute definitions,
for pointing people to their exact definition.
2019-12-03 18:22:27 +01:00
Profpatsch 7395e091c5 doc/manual: add note to allowSubstitutes advanced attribute 2019-12-03 18:01:45 +01:00
Eelco Dolstra 0be8d7784f
Typo 2019-11-26 20:33:46 +01:00
Eelco Dolstra 73efc1e8e7
Merge branch 'document-dry-run-option' of https://github.com/Ma27/nix 2019-11-26 20:32:50 +01:00
Arnout Engelen 4e70652ee3 Document builtins.placeholder 2019-11-25 18:00:05 +01:00
Niklas Hambüchen 07294e988c manual: nix-shell: Elaborate on using -p with expressions.
This documents the outcome of the change in
https://github.com/NixOS/nix/issues/454:

> We can also automatically add parentheses in the generated
> `buildInputs`, so you can type `nix-shell -p "expr"`
> instead of `"(expr").
2019-11-10 17:29:13 +01:00
Maximilian Bosch 52ffe2797a
doc: Document --dry-run option for nix-build 2019-11-07 00:11:57 +01:00
Eelco Dolstra 81a9b93689
Fix manual build 2019-11-05 11:21:32 +01:00
Eelco Dolstra 7876027071
Merge pull request #3193 from matthewbauer/patch-11
Update man to show that nix-shell allows --arg
2019-11-05 11:18:24 +01:00
Eelco Dolstra 78b8203e50
Merge pull request #3180 from kevinastock/patch-1
docs: fix upper bound on number of consumed cores
2019-11-05 11:17:02 +01:00
Eelco Dolstra 376802c9b8
Merge pull request #3199 from kevinastock/patch-2
docs: xref doesn't render in title
2019-11-05 11:16:15 +01:00
Kevin Stock cea05e5ee7
docs: correct default location of log directory 2019-11-04 16:23:03 -05:00
Kevin Stock 808cb6444e
docs: xref doesn't render in title
The `post-build-hook` text currently appears in the index, but not on the actual title line of the section, this follows the pattern used in a previous section to get a reference into a title.
2019-11-02 17:55:53 -04:00
Matthew Bauer f1d4ba2afd
Update man to show that nix-shell allows --arg 2019-11-01 13:25:15 -04:00
Kevin Stock 99aac72a16
docs: fix upper bound on number of consumed cores 2019-10-30 16:53:04 -04:00
Eelco Dolstra b421895c1e
Merge pull request #3161 from schlarpc/patch-1
Remove superfluous IAM action for S3 cache
2019-10-23 16:34:54 +02:00
Chaz Schlarp c92ea927e5
Remove superfluous IAM action for S3 cache
`s3:ListObjects` isn't a real IAM action, but _is_ the name of an S3 API method. `s3:ListBucket` is the relevant action for that method.

https://docs.aws.amazon.com/IAM/latest/UserGuide/list_amazons3.html
2019-10-22 16:04:49 -07:00
Ersin Akinci f107a27002 Tweak path hint 2019-10-21 14:16:55 -07:00
Ersin Akinci b7a936224e Add hint about path in builtins.import 2019-10-21 14:11:26 -07:00
Ersin Akinci 9be7787ec0 Revert "Document import <path> syntax"
This reverts commit d8730fb86f.
2019-10-21 13:12:41 -07:00
Ersin Akinci d8730fb86f Document import <path> syntax 2019-10-20 19:08:05 -07:00
Eelco Dolstra ab4dd1d783
Merge pull request #2291 from Taneb/master
nix-channel documentation: don't suggest deprecated function
2019-10-17 12:53:42 +02:00
Danny Bautista 00a567588e Fix typos in the Nix Manual. 2019-10-08 14:02:40 -04:00
Domen Kožar 043365c2fb
Merge pull request #3080 from Infinisil/tryEval-docs
docs: Note that tryEval doesn't do deep evaluation
2019-09-30 14:03:16 +02:00
Joseph Lucas 10bfc5c0d0
Update garbage-collection.xml readability
1. remove a typo space
2. Simplify negative style by using affirmative style
2019-09-23 13:18:59 +00:00
Alexandre Esteves 9533d85ce0 Move 'builtins.splitVersion' to position respecting alphabetical order 2019-09-17 23:40:49 +01:00
Julien Tanguy ae244af242 docs: Use the explicit ref for fetchGit with a tag
With the merge of #2582, the syntax "tags/1.9" for refs does not work
anymore.
However, the new syntax "refs/tags/1.9" seems to support annotated tags,
such as "refs/tags/2.0".

Closes #2385.
2019-09-11 14:18:47 +02:00
Julien Tanguy 92ede15dd9 docs: Fix a typo in github in an example 2019-09-11 14:11:37 +02:00
Eelco Dolstra 252c78b288
Tweak release notes 2019-09-04 15:59:07 +02:00
Eelco Dolstra b774845af7
Set release date 2019-09-04 12:53:22 +02:00
Silvan Mosberger e4ea3e0306
docs: Note that tryEval doesn't do deep evaluation 2019-09-03 07:32:44 +02:00
Eelco Dolstra 8478c99d09
Merge pull request #3048 from toonn/nix-env_doc
Fix nix-env documentation for --delete-generations
2019-08-29 15:22:01 +02:00
toonn 5bdac86be2 Reword to clarify newer generations are left alone
My attempt at clarifying the docs resulted in a false explanation. This
is now fixed and I added an example to eliminate all possible confusion.
2019-08-29 13:56:21 +02:00
Eelco Dolstra 787015fec0 Merge branch 'master' of github.com:NixOS/nix 2019-08-27 21:18:20 +02:00
Eelco Dolstra fdff96501f Update release notes 2019-08-27 21:18:00 +02:00
Eelco Dolstra 177e5742fa
Merge pull request #3056 from grahamc/operators
operators: document exact precedence, split up similar operators
2019-08-27 17:12:36 +02:00
Eelco Dolstra 45b3dc325a Add 2.3 release notes 2019-08-27 17:00:04 +02:00
Graham Christensen 171d784404
docs: operators: Make OR and AND capitalized 2019-08-27 06:55:22 -04:00
Graham Christensen 15ee2bc2fe
Merge pull request #2946 from vmandela/proxy
installer: handle network proxy in systemd multi-user install
2019-08-24 14:55:19 -04:00
Graham Christensen 057af1dbd8
docs: document the installer's use of proxy env vars 2019-08-24 09:08:44 -04:00
Graham Christensen 92ddce4f46
operators: document exact precedenc, split up similar operators 2019-08-23 15:50:54 -04:00
Toon Nolten 1dbaf11948 Fix nix-env documentation for --delete-generations
The documentation for `--delete-generations` had an erroneous fullstop
and as it turns out inaccurate information on the `+No.` syntax.
2019-08-17 16:33:35 +02:00
Eelco Dolstra b7ea98bf34
Merge pull request #2945 from danidiaz/doc001
Expanded documentation for .nix-defexpr
2019-08-15 15:03:21 +02:00
Eelco Dolstra 477f82e5a7
Merge pull request #2782 from grahamc/flames
Track function start and end
2019-08-15 14:20:42 +02:00
Daniel Diaz 653c407784
Expanded documentation for .nix-defexpr 2019-08-15 08:05:22 -04:00
Graham Christensen ee9c988a1b
Track function start and ends for flame graphs
With this patch, and this file I called `log.py`:

    #!/usr/bin/env nix-shell
    #!nix-shell -i python3 -p python3 --pure

    import sys
    from pprint import pprint

    stack = []
    timestack = []

    for line in open(sys.argv[1]):
        components = line.strip().split(" ", 2)
        if components[0] != "function-trace":
            continue

        direction = components[1]
        components = components[2].rsplit(" ", 2)

        loc = components[0]
        _at = components[1]
        time = int(components[2])

        if direction == "entered":
            stack.append(loc)
            timestack.append(time)
        elif direction == "exited":
            dur = time - timestack.pop()
            vst = ";".join(stack)
            print(f"{vst} {dur}")
            stack.pop()

and:

    nix-instantiate --trace-function-calls -vvvv ../nixpkgs/pkgs/top-level/release.nix -A unstable > log.matthewbauer 2>&1
    ./log.py ./log.matthewbauer > log.matthewbauer.folded
    flamegraph.pl --title matthewbauer-post-pr log.matthewbauer.folded > log.matthewbauer.folded.svg

I can make flame graphs like: http://gsc.io/log.matthewbauer.folded.svg

---

Includes test cases around function call failures and tryEval. Uses
RAII so the finish is always called at the end of the function.
2019-08-14 16:09:35 -04:00
Graham Christensen a02457db71
conf: stalled-download-timeout: make tunable
Make curl's low speed limit configurable via stalled-download-timeout.
Before, this limit was five minutes without receiving a single byte.
This is much too long as if the remote end may not have even
acknowledged the HTTP request.
2019-08-08 10:22:13 -04:00
Graham Christensen 1eeaf99cf8
fixup: docs for post-build-hook 2019-08-07 14:53:11 -04:00
Eelco Dolstra 56df30cd3f
Merge pull request #2995 from tweag/post-build-hook
Add a post build hook
2019-08-07 15:02:29 +02:00
Graham Christensen 363a2f6826
post-build-hook: docs fixup 2019-08-06 14:26:43 -04:00
regnat 7c5596734f
Add a post-build-hook
Passing `--post-build-hook /foo/bar` to a nix-* command will cause
`/foo/bar` to be executed after each build with the following
environment variables set:

    DRV_PATH=/nix/store/drv-that-has-been-built.drv
    OUT_PATHS=/nix/store/...build /nix/store/...build-bin /nix/store/...build-dev

This can be useful in particular to upload all the builded artifacts to
the cache (including the ones that don't appear in the runtime closure
of the final derivation or are built because of IFD).

This new feature prints the stderr/stdout output to the `nix-build`
and `nix build` client, and the output is printed in a Nix 2
compatible format:

    [nix]$ ./inst/bin/nix-build ./test.nix
    these derivations will be built:
      /nix/store/ishzj9ni17xq4hgrjvlyjkfvm00b0ch9-my-example-derivation.drv
    building '/nix/store/ishzj9ni17xq4hgrjvlyjkfvm00b0ch9-my-example-derivation.drv'...
    hello!
    bye!
    running post-build-hook '/home/grahamc/projects/github.com/NixOS/nix/post-hook.sh'...
    post-build-hook: + sleep 1
    post-build-hook: + echo 'Signing paths' /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
    post-build-hook: Signing paths /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
    post-build-hook: + sleep 1
    post-build-hook: + echo 'Uploading paths' /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
    post-build-hook: Uploading paths /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
    post-build-hook: + sleep 1
    post-build-hook: + printf 'very important stuff'
    /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation

    [nix-shell:~/projects/github.com/NixOS/nix]$ ./inst/bin/nix build -L -f ./test.nix
    my-example-derivation> hello!
    my-example-derivation> bye!
    my-example-derivation (post)> + sleep 1
    my-example-derivation (post)> + echo 'Signing paths' /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
    my-example-derivation (post)> Signing paths /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
    my-example-derivation (post)> + sleep 1
    my-example-derivation (post)> + echo 'Uploading paths' /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
    my-example-derivation (post)> Uploading paths /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
    my-example-derivation (post)> + sleep 1
    my-example-derivation (post)> + printf 'very important stuff'
    [1 built, 0.0 MiB DL]

Co-authored-by: Graham Christensen <graham@grahamc.com>
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
2019-08-02 10:48:15 -04:00
Eelco Dolstra 320126aeeb
Tweak min-free/max-free descriptions 2019-08-02 14:04:09 +02:00
Graham Christensen cf6172f05e
docs: document balancing cores and max-jobs 2019-07-19 08:28:44 -04:00
Eelco Dolstra b5ae85f088
Merge pull request #2882 from grahamc/docs/1115-tarball-ttl
tarball-ttl: document
2019-07-06 00:15:27 +02:00
Graham Christensen 648bdf153d
tarball-ttl: document
Incorporates text from Niklas Hambüchen in #2978

Closes #1115
2019-07-05 15:55:28 -04:00
Eelco Dolstra 7d6ba1dc90
Merge branch 'autoconf-ubuntu-16.04-fixes' of https://github.com/nh2/nix 2019-07-03 08:02:45 +02:00
Niklas Hambüchen 57daa860e8 autoconf: Fix C++17 detection not working on Ubuntu 16.04.
And probably many other distributions.

Until now, ./configure would fail silently printing a warning

    ./configure: line 4621: AX_CXX_COMPILE_STDCXX_17: command not found

and then continuing, later failing with a C++ #error saying that some C++11
feature isn't supported (it didn't even get to the C++17 features).

This is because older distributions don't come with the
`AX_CXX_COMPILE_STDCXX_17` m4 macro.

This commit vendors that macro accordingly.

Now ./configure complains correctly:

    configure: error: *** A compiler with support for C++17 language features is required.

On Ubuntu 16.04, ./configure completes if a newer compiler is used, e.g. with
gcc-7 from https://launchpad.net/~ubuntu-toolchain-r/+archive/ubuntu/test
using:

    ./bootstrap.sh
    ./configure CXX=g++-7 --disable-doc-gen --with-boost=$(nix-build --no-link '<nixpkgs>' -A boost.dev)
2019-07-03 04:32:25 +02:00
Niklas Hambüchen 1f97b16b1d autoconf: Work around editline not being found on Ubuntu 16.04.
And probably other Linux distributions with long-term support releases.

Also update manual stating what version is needed;
I checked that 1.14 is the oldest version with which current nix compiles,
and added autoconf feature checks for some functions added in that release
that nix uses.
2019-07-03 04:32:25 +02:00
Eelco Dolstra 7e1c85c5fb
Merge pull request #2779 from LnL7/build-exit-codes
build: add exit code for hash and check mismatches
2019-07-02 17:37:49 +02:00
Eelco Dolstra 7c0b0dbec8
Merge pull request #2724 from LnL7/manpage-add-fixed
nix-store: document --add-fixed
2019-07-02 15:47:40 +02:00