Commit graph

613 commits

Author SHA1 Message Date
Eelco Dolstra 0ab4d905e7 Merge branch 'p/sandbox-rename-minimal' of https://github.com/vcunat/nix 2015-11-25 14:53:42 +01:00
Rommel M. Martinez cf141abfe9 Fixed typo. 2015-11-23 15:59:57 +08:00
Vladimír Čunát b39622a487 rename chroot to sandbox (fixes #656, close #682)
- rename options but leav old names as lower-priority aliases,
  also "-dirs" -> "-paths" to get closer to the meaning
- update docs to reflect the new names (old aliases are not documented),
  including a new file with release notes
- tests need an update after corresponding changes to nixpkgs
- __noChroot is left as it is (after discussion on the PR)
2015-11-10 22:32:51 +01:00
Eelco Dolstra 8fdd156a65 Add option to verify build determinism
Passing "--option build-repeat <N>" will cause every build to be
repeated N times. If the build output differs between any round, the
build is rejected, and the output paths are not registered as
valid. This is primarily useful to verify build determinism. (We
already had a --check option to repeat a previously succeeded
build. However, with --check, non-deterministic builds are registered
in the DB. Preventing that is useful for Hydra to ensure that
non-deterministic builds don't end up getting published at all.)
2015-11-09 23:16:24 +01:00
Anders Claesson 055ab1fc8d Fix typo in doc for nix-copy-closure 2015-10-08 13:17:01 +02:00
Eelco Dolstra f08449ccbd nix-prefetch-url: Add --name option
This allows overriding the name component of the resulting Nix store
path, which is necessary if the base name of the URI contains
"illegal" characters.
2015-10-07 14:55:33 +02:00
Eelco Dolstra b54f447df9 nix-prefetch-url: Support unpacking tarballs
This allows nix-prefetch-url to prefetch the output of fetchzip and
its wrappers (like fetchFromGitHub). For example:

  $ nix-prefetch-url --unpack https://github.com/NixOS/patchelf/archive/0.8.tar.gz

or from a Nix expression:

  $ nix-prefetch-url -A nix-repl.src

In the latter case, --unpack can be omitted because nix-repl.src is a
fetchFromGitHub derivation and thus has "outputHashMode" set to
"recursive".
2015-10-07 14:40:10 +02:00
Eelco Dolstra 9ffc4f4363 Don't mention Fedora/Debian packages in the installation section
See d4a88df9d6
2015-10-05 18:46:25 +02:00
Eelco Dolstra 57db2aa220 Merge pull request #645 from acowley/patch-1
Update prerequisites-source.xml
2015-10-05 15:05:32 +02:00
Eelco Dolstra 06f29fafe8 nix-prefetch-url: Support prefetching from a Nix expression
For example,

  $ nix-prefetch-url -A hello.src

will prefetch the file specified by the fetchurl call in the attribute
‘hello.src’ from the Nix expression in the current directory. This
differs from ‘nix-build -A hello.src’ in that it doesn't verify the
hash.

You can also specify a path to the Nix expression:

  $ nix-prefetch-url ~/Dev/nixpkgs -A hello.src

List elements (typically used in ‘patches’ attributes) also work:

  $ nix-prefetch-url -A portmidi.patches.0
2015-10-01 18:07:56 +02:00
Eelco Dolstra a3c4eb0964 nix-prefetch-url: $PRINT_PATH -> --print-path 2015-10-01 16:53:07 +02:00
Vladimír Čunát 12a4aea93d doc: fix the 'prebuild' typos 2015-09-17 12:08:05 +02:00
Anthony Cowley e5c3e054ec Update prerequisites-source.xml
The Perl WWW::Curl bindings are required to build Nix.
2015-09-15 12:42:44 -04:00
Eelco Dolstra 6e06a18d1b Release notes 2015-09-03 11:57:47 +02:00
Eelco Dolstra ce97523a7c Fix readDir example
Fixes https://github.com/NixOS/nixos-homepage/issues/46.
2015-09-01 16:53:51 +02:00
Eelco Dolstra 896428c818 Fix example 2015-08-05 17:36:33 +02:00
Eelco Dolstra 76cc8e97a2 Add sort primop 2015-07-28 18:39:39 +02:00
Eelco Dolstra 50807f3dd5 Add primop genList
This can be used to implement functions like ‘imap’ (or for that
matter, ‘map’) without the quadratic complexity incurred by calling
‘++’ repeatedly.
2015-07-28 17:28:35 +02:00
Eelco Dolstra d6d5885c15 Add replaceStrings primop
This is a generalisation of replaceChars in Nixpkgs.
2015-07-24 15:32:24 +02:00
Eelco Dolstra 14be783676 Add primops all and any
These are used thousands of times during NixOS evaluation, so it's
useful to speed them up.
2015-07-23 19:23:11 +02:00
Eelco Dolstra 61af14a921 Add foldl' primop 2015-07-23 17:03:02 +02:00
Eelco Dolstra ccf31dbc25 nix-copy-closure: Add -v flag
And make exportPath() less spammy by default.
2015-07-20 01:52:07 +02:00
Eelco Dolstra 39b3d9698e Typos 2015-06-12 11:02:40 +02:00
Eelco Dolstra d1e4b76a3a Update release notes 2015-06-12 01:11:03 +02:00
Eelco Dolstra 7d148ad543 Fix manual 2015-06-08 11:25:04 +02:00
Eelco Dolstra 53dd97bb9d Document setting up signed binary caches 2015-06-01 17:14:16 +02:00
Eelco Dolstra da196ec68f Document tarball downloading 2015-06-01 15:14:44 +02:00
Eelco Dolstra feca5cb67f Document nix-shell #!-scripts 2015-06-01 13:49:11 +02:00
Eelco Dolstra 99c2c14f50 Typo 2015-06-01 13:04:10 +02:00
Eelco Dolstra d68941d89d Nix 1.9 release notes 2015-06-01 12:57:43 +02:00
Charles Strahan 9c6328a7bf nix-env: document --set option 2015-05-19 11:00:15 +02:00
Shea Levy 4d652875bd Add the pre-build hook.
This hook can be used to set system-specific per-derivation build
settings that don't fit into the derivation model and are too complex or
volatile to be hard-coded into nix. Currently, the pre-build hook can
only add chroot dirs/files through the interface, but it also has full
access to the chroot root.

The specific use case for this is systems where the operating system ABI
is more complex than just the kernel-support system calls. For example,
on OS X there is a set of system-provided frameworks that can reliably
be accessed by any program linked to them, no matter the version the
program is running on. Unfortunately, those frameworks do not
necessarily live in the same locations on each version of OS X, nor do
their dependencies, and thus nix needs to know the specific version of
OS X currently running in order to make those frameworks available. The
pre-build hook is a perfect mechanism for doing just that.
2015-04-18 16:56:02 -04:00
Shea Levy fd6774e285 Revert "Add the pre-build hook."
Going to reimplement differently.

This reverts commit 1e4a4a2e9f.
2015-04-18 14:59:58 -04:00
Shea Levy 1e4a4a2e9f Add the pre-build hook.
This hook can be used to set system specific per-derivation build
settings that don't fit into the derivation model and are too complex or
volatile to be hard-coded into nix. Currently, the pre-build hook can
only add chroot dirs/files.

The specific use case for this is systems where the operating system ABI
is more complex than just the kernel-supported system calls. For
example, on OS X there is a set of system-provided frameworks that can
reliably be accessed by any program linked to them, no matter the
version the program is running on. Unfortunately, those frameworks do
not necessarily live in the same locations on each version of OS X, nor
do their dependencies, and thus nix needs to know the specific version
of OS X currently running in order to make those frameworks available.
The pre-build hook is a perfect mechanism for doing just that.
2015-04-12 12:56:38 -04:00
Daniel Hahler e659978ced Fix typos: s/the the/the/ 2015-03-06 16:43:22 +01:00
Eelco Dolstra cffa7f80ab Typo 2015-02-23 16:02:50 +01:00
Eelco Dolstra 99897f6979 Use chroots for all derivations
If ‘build-use-chroot’ is set to ‘true’, fixed-output derivations are
now also chrooted. However, unlike normal derivations, they don't get
a private network namespace, so they can still access the
network. Also, the use of the ‘__noChroot’ derivation attribute is
no longer allowed.

Setting ‘build-use-chroot’ to ‘relaxed’ gives the old behaviour.
2015-02-23 15:54:31 +01:00
Eelco Dolstra 15d2d3c34e Add restricted evaluation mode
If ‘--option restrict-eval true’ is given, the evaluator will throw an
exception if an attempt is made to access any file outside of the Nix
search path. This is primarily intended for Hydra, where we don't want
people doing ‘builtins.readFile ~/.ssh/id_dsa’ or stuff like that.
2015-02-23 15:54:31 +01:00
Shea Levy a8494de0be Merge branch 'docs/channels-path' of git://github.com/iElectric/nix 2015-02-22 11:59:38 -05:00
Domen Kožar 7bd8299c6c fixes https://github.com/NixOS/nixpkgs/issues/6485 2015-02-22 08:39:29 -08:00
Shea Levy e0953d53de Allow the leading component of a path to be a ~ 2015-02-19 08:05:16 -05:00
Eelco Dolstra bd91064150 Use $<attr>Path instead of $<attr> for passAsFile 2015-02-17 16:42:54 +01:00
Eelco Dolstra a70d275f3d Allow passing attributes via files instead of environment variables
Closes #473.
2015-02-17 14:42:15 +01:00
Eelco Dolstra 29e1ff675b Keep sorted 2015-02-17 13:55:37 +01:00
Eelco Dolstra de8ed5c1d3 Typo 2015-02-04 18:17:06 +01:00
Shea Levy d66d9e8425 Require linux 3.13 or later for chroot
Fixes #453
2015-02-04 18:15:56 +01:00
Tobias Geerinckx-Rice c23d67920e doc: nix-channel --remove takes a name, not a url 2015-01-12 10:56:58 +01:00
Данило Глинський (Danylo Hlynskyi) ed56ea980b Fix typo (assuming this is a typo)
Fix typo (assuming this is a typo)
`allowedRequisites` mentions `allowedReferences` in code example
2015-01-08 16:43:56 +01:00
Eelco Dolstra 128538ef06 nix-shell: Add --run flag
‘--run’ is like ‘--command’, except that it runs the command in a
non-interactive shell. This is important if you do things like:

  $ nix-shell --command make

Hitting Ctrl-C while make is running drops you into the interactive
Nix shell, which is probably not what you want. So you can now do

  $ nix-shell --run make

instead.
2015-01-08 15:14:38 +01:00
Eelco Dolstra 4d5c9d85ea Document how to set up build users on Mac OS X 2015-01-06 11:17:11 +01:00