lix/substitute.mk

%: %.in Makefile
	sed \
	 -e "s^@abs_top_srcdir\@^$(abs_top_srcdir)^g" \
	 -e "s^@abs_top_builddir\@^$(abs_top_builddir)^g" \
	 -e "s^@extra1\@^$(extra1)^g" \
	 -e "s^@prefix\@^$(prefix)^g" \
	 -e "s^@bindir\@^$(bindir)^g" \
	 -e "s^@sysconfdir\@^$(sysconfdir)^g" \
	 -e "s^@localstatedir\@^$(localstatedir)^g" \
	 -e "s^@datadir\@^$(datadir)^g" \
	 -e "s^@libdir\@^$(libdir)^g" \
	 -e "s^@libexecdir\@^$(libexecdir)^g" \
	 -e "s^@storedir\@^$(storedir)^g" \
	 -e "s^@system\@^$(system)^g" \
	 -e "s^@shell\@^$(bash)^g" \
	 -e "s^@curl\@^$(curl)^g" \
	 -e "s^@bzip2\@^$(bzip2)^g" \
	 -e "s^@perl\@^$(perl)^g" \
	 -e "s^@perlFlags\@^$(perlFlags)^g" \
	 -e "s^@coreutils\@^$(coreutils)^g" \
	 -e "s^@sed\@^$(sed)^g" \
	 -e "s^@tar\@^$(tar)^g" \
	 -e "s^@gzip\@^$(gzip)^g" \
	 -e "s^@tr\@^$(tr)^g" \
	 -e "s^@dot\@^$(dot)^g" \
	 -e "s^@xmllint\@^$(xmllint)^g" \
	 -e "s^@xmlflags\@^$(xmlflags)^g" \
	 -e "s^@xsltproc\@^$(xsltproc)^g" \
	 -e "s^@sqlite_bin\@^$(sqlite_bin)^g" \
	 -e "s^@version\@^$(VERSION)^g" \
	 -e "s^@testPath\@^$(coreutils):$$(dirname $$(type -p expr))^g" \
	 < $< > $@ || rm $@
	if test -x $<; then chmod +x $@; fi
* Refactorings. 2003-07-20 19:29:38 +00:00			`%: %.in Makefile`
			`sed \`
tests: Run `download-using-manifests' via libtool so that dlopening works. 2012-01-11 16:58:49 +00:00			`-e "s^@abs_top_srcdir\@^$(abs_top_srcdir)^g" \`
			`-e "s^@abs_top_builddir\@^$(abs_top_builddir)^g" \`
* A test to verify that Nix executes build jobs in parallel, if possible. This test fails right now because this hasn't been implemented right now. Yes, I'm doing Test-Driven Development! ;-) 2004-05-04 17:04:17 +00:00			`-e "s^@extra1\@^$(extra1)^g" \`
* Maintain integrity of the substitute and successor mappings when deleting a path in the store. * Allow absolute paths in Nix expressions. * Get nix-prefetch-url to work again. * Various other fixes. 2003-11-22 18:45:56 +00:00			`-e "s^@prefix\@^$(prefix)^g" \`
			`-e "s^@bindir\@^$(bindir)^g" \`
			`-e "s^@sysconfdir\@^$(sysconfdir)^g" \`
			`-e "s^@localstatedir\@^$(localstatedir)^g" \`
			`-e "s^@datadir\@^$(datadir)^g" \`
* Install NixManifest.pm, NixConfig.pm and GeneratePatches.pm under the Nix:: namespace. 2011-10-10 21:11:08 +00:00			`-e "s^@libdir\@^$(libdir)^g" \`
* nix-pull requires libexecdir to be substituted. 2003-12-23 22:15:12 +00:00			`-e "s^@libexecdir\@^$(libexecdir)^g" \`
* Use $(storedir) instead of $(prefix)/store. 2004-02-20 11:32:30 +00:00			`-e "s^@storedir\@^$(storedir)^g" \`
* Use a system name that does not include the OS manufacturer (i.e., "i686-linux" instead of "i686-suse-linux"). 2003-12-01 14:36:50 +00:00			`-e "s^@system\@^$(system)^g" \`
* Make really sure that we use bash. The line NEED_PROG(shell, bash) actually uses the content of $shell if set, which often points at /bin/sh. 2008-04-10 09:54:23 +00:00			`-e "s^@shell\@^$(bash)^g" \`
* Switched from wget to curl. * Made the dependencies on bzip2 and the shell explicit. 2004-04-06 08:18:51 +00:00			`-e "s^@curl\@^$(curl)^g" \`
Drop the externals directory Nix now requires SQLite and bzip2 to be pre-installed. SQLite is detected using pkg-config. We required DBD::SQLite anyway, so depending on SQLite is not a big problem. The --with-bzip2, --with-openssl and --with-sqlite flags are gone. 2012-03-18 22:54:57 +00:00			`-e "s^@bzip2\@^$(bzip2)^g" \`
* Make perl a dependency of Nix. 2004-03-15 15:23:53 +00:00			`-e "s^@perl\@^$(perl)^g" \`
* configure: detect whether DBD::SQLite is present. If necessary the location to DBI and DBD::SQLite can be passed with --with-dbi and --with-dbd-sqlite. 2011-04-11 10:13:53 +00:00			`-e "s^@perlFlags\@^$(perlFlags)^g" \`
* Purify all corepkgs builders. 2005-03-15 12:03:15 +00:00			`-e "s^@coreutils\@^$(coreutils)^g" \`
* nix-prefetch-url depends on sed (see http://hydra.nixos.org/build/311170). 2010-03-05 18:26:47 +00:00			`-e "s^@sed\@^$(sed)^g" \`
* Purify all corepkgs builders. 2005-03-15 12:03:15 +00:00			`-e "s^@tar\@^$(tar)^g" \`
--proxy=proxy:3128 2008-05-07 14:18:28 +00:00			`-e "s^@gzip\@^$(gzip)^g" \`
* Give unpacked channels more sensible names than 0, 1, ... They now get the basename of the channel URL (e.g., nixpkgs-unstable). The top-level Nix expression of the channel is now an attribute set, the attributes of which are the individual channels (e.g., {nixpkgs_unstable = ...; strategoxt_unstable = ...}). This makes attribute paths ("nix-env -qaA" and "nix-env -iA") more sensible, e.g., "nix-env -iA nixpkgs_unstable.subversion". 2007-05-01 23:16:38 +00:00			`-e "s^@tr\@^$(tr)^g" \`
* Make it easy to run individual tests from the command line. 2006-03-01 12:15:33 +00:00			`-e "s^@dot\@^$(dot)^g" \`
* Add a test for nix-log2xml. 2006-03-01 13:25:08 +00:00			`-e "s^@xmllint\@^$(xmllint)^g" \`
			`-e "s^@xmlflags\@^$(xmlflags)^g" \`
			`-e "s^@xsltproc\@^$(xsltproc)^g" \`
* Set the path to sqlite3 properly. 2010-02-24 11:06:17 +00:00			`-e "s^@sqlite_bin\@^$(sqlite_bin)^g" \`
* Generate RPM spec file. 2004-01-02 16:04:53 +00:00			`-e "s^@version\@^$(VERSION)^g" \`
* "type -P" isn't portable. 2010-10-04 15:50:08 +00:00			`-e "s^@testPath\@^$(coreutils):$$(dirname $$(type -p expr))^g" \`
* Refactorings. 2003-07-20 19:29:38 +00:00			`< $< > $@ \|\| rm $@`
* Generate RPM spec file. 2004-01-02 16:04:53 +00:00			`if test -x $<; then chmod +x $@; fi`