We now take into account the memory necessary for compressing the NAR
being exported to the binary cache, plus xz compression overhead.
Also, we now release the memory tokens for the NAR accessor *after*
releasing the NAR accessor. Previously the memory for the NAR accessor
might still be in use while another thread does an allocation, causing
the maximum to be exceeded temporarily.
Also, use notify_all instead of notify_one to wake up memory token
waiters. This is not very nice, but not every waiter is requesting the
same number of tokens, so some might be able to proceed.
If a step is cancelled just as its builder step is starting,
doBuildStep() will return sRetry. This causes builder() to make the
step runnable again, since the queue monitor may have added new builds
referencing it. The idea is that if the latter condition is not true,
the step's reference count will drop to zero and it will be
deleted. However, if the dispatcher thread sees and locks the step
before the reference count can drop to zero in the builder thread, the
dispatcher thread will start a new builder thread for the step. Thus
the step can be kept alive for an indefinite amount of time.
The fix is for State::builder() to use a weak pointer to the step, to
ensure that the step's reference count can drop to zero *before* it's
added to the runnable queue.
This was a bad idea because pthread_cancel() is unsalvageable broken
in C++. Destructors are not allowed to throw exceptions (especially in
C++11), but pthread_cancel() can cause a __cxxabiv1::__forced_unwind
exception inside any destructor that invokes a cancellation
point. (This exception can be caught but *must* be rethrown.) So let's
just kill the builder process instead.
It was hitting
assert(reservation.unique());
Since we do want the machine reservation to be released before calling
wakeDispatcher(), let's use a different object for keeping track of
active steps.
We now kill active build steps when there are no more referring
builds. This is useful e.g. for preventing cancelled multi-hour TPC-H
benchmark runs from hogging build machines.
If two active steps of the same build failed, then the first would be
marked as "failed", but the second would end up as "orphaned", causing
it to be marked as "aborted" later on. Now it's correctly marked as
"failed".
Without this, if (failed or aborted) derivations have been
garbage-collected, there is no way to restart them, which is very
annoying. Now we set a forceEval flag in the jobset to cause it to be
re-evaluated even if none of the inputs have changed.
‘basicDrv.inputSrcs’ also contains the outputs of inputDrvs. These
don't necessarily exist in the local store, so copying them may cause
an exception. We should only copy the real inputSrcs.
Some Hydra API requests were vulnerable to XSRF attacks, e.g. you
could have a form on another website using http://hydra/logout as the
form action. So we now require POST requests to come from the same
origin.
Reported by Hans-Christian Esperer.
This rewrites the top-level loop of hydra-evaluator in C++. The Perl
stuff is moved into hydra-eval-jobset. (Rewriting the entire evaluator
would be nice but is a bit too much work.) The new version has some
advantages:
* It can run multiple jobset evaluations in parallel.
* It uses PostgreSQL notifications so it doesn't have to poll the
database. So if a jobset is triggered via the web interface or from
a GitHub / Bitbucket webhook, evaluation of the jobset will start
almost instantaneously (assuming the evaluator is not at its
concurrency limit).
* It imposes a timeout on evaluations. So if e.g. hydra-eval-jobset
hangs connecting to a Mercurial server, it will eventually be
killed.
This prevents the server from gradually filling up due to store paths
fetched by hydra-server that then get turned into a GC root by
hydra-update-gc-roots.
Dashboards can now be marked as publically visible in the user
preferences. The dashboard URL has changed from /user/<name>/dashboard
to /dashboard/<name> because /user/<name> requires being logged in as
<name> or as an admin.
This allows fully declarative project specifications. This is best
illustrated by example:
* I create a new project, setting the declarative spec file to
"spec.json" and the declarative input to a git repo pointing
at git://github.com/shlevy/declarative-hydra-example.git
* hydra creates a special ".jobsets" jobset alongside the project
* Just before evaluating the ".jobsets" jobset, hydra fetches
declarative-hydra-example.git, reads spec.json as a jobset spec,
and updates the jobset's configuration accordingly:
{
"enabled": 1,
"hidden": false,
"description": "Jobsets",
"nixexprinput": "src",
"nixexprpath": "default.nix",
"checkinterval": 300,
"schedulingshares": 100,
"enableemail": false,
"emailoverride": "",
"keepnr": 3,
"inputs": {
"src": { "type": "git", "value": "git://github.com/shlevy/declarative-hydra-example.git", "emailresponsible": false },
"nixpkgs": { "type": "git", "value": "git://github.com/NixOS/nixpkgs.git release-16.03", "emailresponsible": false }
}
}
* When the "jobsets" job of the ".jobsets" jobset completes, hydra
reads its output as a JSON representation of a dictionary of
jobset specs and creates a jobset named "master" configured
accordingly (In this example, this is the same configuration as
.jobsets itself, except using release.nix instead of default.nix):
{
"enabled": 1,
"hidden": false,
"description": "js",
"nixexprinput": "src",
"nixexprpath": "release.nix",
"checkinterval": 300,
"schedulingshares": 100,
"enableemail": false,
"emailoverride": "",
"keepnr": 3,
"inputs": {
"src": { "type": "git", "value": "git://github.com/shlevy/declarative-hydra-example.git", "emailresponsible": false },
"nixpkgs": { "type": "git", "value": "git://github.com/NixOS/nixpkgs.git release-16.03", "emailresponsible": false }
}
}
Currently, the hydra.nixos.org queue contains 1000s of Darwin builds
that all depend on a stdenv-darwin that previously failed. However,
before, first createStep() would construct a dependency graph for each
build, then getQueuedBuilds() would discover that one of the steps had
failed previously and discard all those steps. Since the graph
construction involves a lot of uncached calls to isValidPath(), this
took several seconds per build.
Now createStep() detects the previous failure right away and bails
out.
These are build steps that remain "busy" in the database even though
they have finished, because they couldn't be updated (e.g. due to a
PostgreSQL connection problem). To prevent them from showing up as
busy in the "Machine status" page, we now periodically purge them.
Previously, if the queue monitor thread encounters a build that Hydra
has previously built, it downloaded the output paths from the binary
cache, just to determine the build products and metrics. This is very
inefficient. In particular, when doing something like merging
nixpkgs:staging into nixpkgs:master, the queue monitor thread will be
locked up for a long time fetching files from S3, causing the build
farm to be mostly idle.
Of course this is entirely unnecessary, since the build
products/metrics are already in the Hydra database. So now we just
look up a previous build with the same output path, and copy the
products/metrics.
Mutliple <githubstatus> sections are possible:
* jobs: regexp for jobs to match
* inputs: the input which corresponds to the github repo/rev whose
status we want to report. Can be repeated
* authorization: Verbatim contents of the Authorization header. See
https://developer.github.com/v3/#authentication.
Otherwise, the browser may mix up HTML and JSON responses if it has
requested both. For example, hitting the back button to return to a
job metric page will show a JSON response, because that was the last
thing the browser fetched for that URL.
This requires Catalyst::Action::Rest >= 1.20.
The previous query
select count(*) from builds b left join buildsteps s on s.build = b.id where busy = 1 and finished = 0
is suddenly taking several minutes. Probably PostgreSQL decided to use
a suboptimal query plan.
The maximum output size per build step (as the sum of the NARs of each
output) can be set via hydra.conf, e.g.
max-output-size = 1000000000
The default is 2 GiB.
Also refactored the build error / status handling a bit.
When using a binary cache store, the queue runner receives NARs from
the build machines, compresses them, and uploads them to the
cache. However, keeping multiple large NARs in memory can cause the
queue runner to run out of memory. This can happen for instance when
it's processing multiple ISO images concurrently.
The fix is to use a TokenServer to prevent the builder threads to
store more than a certain total size of NARs concurrently (at the
moment, this is hard-coded at 4 GiB). Builder threads that cause the
limit to be exceeded will block until other threads have finished.
The 4 GiB limit does not include certain other allocations, such as
for xz compression or for FSAccessor::readFile(). But since these are
unlikely to be more than the size of the NARs and hydra.nixos.org has
32 GiB RAM, it should be fine.
The old page didn't scale very well if you have 150K builds in the
queue, in fact it tended to make browsers hang. The new one just
shows, for each jobset, the number of queued builds. The actual builds
can be seen by going to the corresponding jobset page and looking at
the evals.
Same problem as d744362e4a.
at /nix/store/ksvsbr7pg4z69bv6fbbc8h7x7rm2104m-gcc-4.9.3/include/c++/4.9.3/bits/predefined_ops.h:166
__last@entry=..., __comp=...) at /nix/store/ksvsbr7pg4z69bv6fbbc8h7x7rm2104m-gcc-4.9.3/include/c++/4.9.3/bits/stl_algo.h:1827
__comp=...) at /nix/store/ksvsbr7pg4z69bv6fbbc8h7x7rm2104m-gcc-4.9.3/include/c++/4.9.3/bits/stl_algo.h:4717
Respects <slack> blocks in the hydra config, with attributes:
* jobs: a regexp matching the job name (in the format project:jobset:job)
* url: The URL to a slack incoming webhook
* force: If true, always send messages. Otherwise, only when the build status changes
Multiple <slack> blocks are allowed
To use the local Nix store (default):
store_mode = direct
To use a local binary cache:
store_mode = local-binary-cache
binary_cache_dir = /var/lib/hydra/binary-cache
To use an S3 bucket:
store_mode = s3-binary-cache
binary_cache_s3_bucket = my-nix-bucket
Also, respect binary_cache_{secret,public}_key_file for signing the
binary cache.
The queue runner no longer uses this field, and it doesn't provide
very interesting historical data (mostly SSH failures), but it takes
up a lot of space. Also, it contained some bad UTF-8 which was
preventing an upgrade to Postgres 9.5, so a good occasion to get rid
of it.
The required configuration in hydra.conf:
enable_google_login = 1
google_client_id = 238429sdjkds....apps.googleusercontent.com
and optionally persona_allowed_domains to restrict to one or more
domains.
This is necessary given the current size of the Nixpkgs/NixOS
jobsets. Once we have a Nix store + Postgres on SSD, we can reduce
this again.
Should really make this configurable...
The uid split a while back caused the web interface to create GC roots
in /nix/var/nix/gcroots/per-user/hydra-www, where they wouldn't be
purged by hydra-update-gc-roots. Thus restarted builds would
accumulate forever. The fix is to keep the roots in a shared directory
with gid=hydra.
Regression introduced by 1fdc258de0.
The commit introduced a channel/custom PathPart which uses the new
custom channel expressions, but I forgot to remove CaptureArgs, so the
URL really is channel/latest/ignored-value.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Reported-by: Peter Simons <simons@cryp.to>
This removes the "busy", "locker" and "logfile" columns, which are no
longer used by the queue runner. The "Running builds" page now only
shows builds that have an active build step.
