This allows users to sign in to Hydra using Mozilla Persona accounts.
When a user first sign in, a row in the Users table for the given
Persona identity (an email address) is created automatically.
To do: figure out how to deal with legacy accounts.
The catalyst-action-rest branch from shlevy/hydra was an exploration of
using Catalyst::Action::REST to create a JSON API for hydra. This commit
merges in the best bits from that experiment, with the goal that further
API endpoints can be added incrementally.
In addition to migrating more endpoints, there is potential for
improvement in what's already been done:
* The web interface can be updated to use the same non-GET endpoints as
the JSON interface (using x-tunneled-method) instead of having a
separate endpoint
* The web rendering should use the $c->stash->{resource} data structure
where applicable rather than putting the same data in two places in
the stash
* Which columns to render for each endpoint is a completely debatable
question
* Hydra::Component::ToJSON should turn has_many relations that have
strings as their primary keys into objects instead of arrays
FixesNixOS/hydra#98
Signed-off-by: Shea Levy <shea@shealevy.com>
HipChat notification messages now say which committers were
responsible, e.g.
Job patchelf:trunk:tarball: Failed, probably due to 2 commits by Eelco Dolstra
This plugin sends notification of build failure or success to a
HipChat room, if the status differs from the last build.
The plugin can be configured by adding one or more of these stanzas to
hydra.conf:
<hipchat>
jobs = (patchelf|nixops):.*:.*
room = 1234
token = 39ab2198fe...
</hipchat>
Here "jobs" is a regular expression against which the fully qualified
job name of the build is matched (so for instance
"nixops:master:tarball" will match the stanza above).
Restarted builds whose derivation has been garbage-collected in the
meantime caused hydra-queue-runner to get stuck in a loop saying:
Jun 14 11:54:25 lucifer hydra-queue-runner[31844]: system type `x86_64-darwin': 0 active, 2 allowed, started 2 builds
Jun 14 11:54:25 lucifer hydra-queue-runner[31844]: {UNKNOWN}: path `/nix/store/wcizsch2garjlvs4pswrar47i1hwjaia-inconsolata.drv' is not valid at
/nix/store/ypkdm4v13yrk941rvp8h0y425a5ww6nm-hydra-0.1pre1353-40debf1/bin/.hydra-queue-runner-wrapped line 51. at
/nix/store/kjpsc2zdaxnd44azxyw60f2px839m1cd-hydra-perl-deps/lib/perl5/site_perl/5.16.2/Catalyst/Model/DBIC/Schema.pm line 501
This happens if the previous iteration took more than 60 seconds.
Then the queue runner may think that builds failed to start properly
and unlock them, e.g.
build 5264936 pid 19248 died, unlocking
build 5264951 pid 19248 died, unlocking
build 5257073 pid 19248 died, unlocking
...
Because we don't start a build if a dependency is already building,
it's possible that some or all of the $extraAllowed highest-priority
builds in the queue are not eligible. E.g. with $extraAllowed = 32,
we might start only 3 builds even though there are thousands in the
queue. The fix is to try all queued builds until $extraAllowed have
been started.
Issue #99.
For some reason, hg clone from a local (path-based) repo will fail if
the parent directory of the destination directory doesn't exist (though
it succeeds when cloning from an http repo).
Signed-off-by: Shea Levy <shea@shealevy.com>
Previously, for scheduled builds, "timestamp" contained the time the
build was added to the queue, while for finished builds, it was the
time the build finished. Now it's always the former.
The revision counting changes depending on which revision is cloned
initially, so clone the default branch first and then checkout the
required revision to match hydra's revCount.
Signed-off-by: Shea Levy <shea@shealevy.com>
See e.g. http://hydra.nixos.org/build/4915744.
P.S. existing active build steps of finished builds can be marked as
aborted by running:
update buildsteps set busy = 0, status = 4
where (build, stepnr) in
(select s.build, s.stepnr from buildsteps s join builds b on s.build = b.id where b.finished = 1 and s.busy = 1);
This is mostly so we don't have to pass around common parameters like
"db" and "config", and we don't have to check for the existence of
methods.
A plugin now looks like this:
package Hydra::Plugin::TwitterNotification;
use parent 'Hydra::Plugin';
sub buildFinished {
my ($self, $build, $dependents) = @_;
print STDERR "tweeting about build ", $build->id, "\n";
# Send tweet...
# Hydra database is $self->{db}.
}
You can now add plugins to Hydra by writing a module called
Hydra::Plugin::<whatever> and putting it in Perl's search path. The
only plugin operation currently supported in buildFinished, called
when hydra-build has finished doing a build.
For instance, a Twitter notification plugin would look like this:
package Hydra::Plugin::TwitterNotification;
sub buildFinished {
my ($self, $db, $config, $build, $dependents) = @_;
print STDERR "tweeting about build ", $build->id, "\n";
# send tweet...
}
1;
Previously this function didn't actually have a lot of effect. If a
build A had a dependency B, Hydra would start B first. But on the
next scan through the queue, it would start A anyway, because of the
"busy => 0" restriction.
Now the queue runner won't start a build if a dependency is already
running. (This is not necessarily optimal, since the build may have
other dependencies that don't correspond to a build in the queue but
could run. One day we'll start all Hydra builds in parallel...)
Also, for performance, use computeFSClosure instead of "nix-store
-qR". And don't bother with topological sorting because it didn't
have an effect anyway since the database returns dependencies in
arbitrary order.
This allows checking a jobset (say) at most once a day. It's also
possible to disable polling by setting the interval to 0. This is
useful for jobsets that use push notification or are manually
evaluated.
This caused exceptions like:
Caught exception in Hydra::Controller::Build->view_build "writing to file: Broken pipe at /nix/store/ihdb3widsq1dk7sbl5vqjxfcxb5ypad4-hydra-0.1pre1297-8158093/libexec/hydra/lib/Hydra/Controller/Build.pm line 59."
because the connection to the Nix daemon would be terminated due to a
protocol violation (calling queryPathInfo with an empty string).
Returning only the first 20 results can cause NixOS/Nixpkgs channel
generation to fail, if the first 20 view results correspond to
evaluations that haven't finished yet. Then URLs like
/view/nixos/tested/latest-finished will return 500 rather than the
latest finished view.
Avoid the frequently printed
hydra-queue-runner[10293]: system type `x86_64-linux': 2 active, 2 allowed, starting 0 builds
message. That information is only interesting when some build are
actually started.
You can now do:
bash <(curl http://hydra-server/build/1238757/reproduce)
to download and execute a script that reproduces a Hydra build
locally. This script fetches all inputs (e.g. Git repositories) and
then invokes nix-build.
The downloaded sources are stored in /tmp/build-<buildid> and reused
between invocations of the script.
Any additional command line options are passed to nix-build. So
bash <(curl http://hydra-server/build/1238757/reproduce) --run-env
will drop you in a shell where you can interactively hack on the
build, e.g.
$ source $stdenv/setup
$ set +e
$ unpackPhase
$ cd $sourceRoot
$ configurePhase
$ emacs foo.c &
$ make
and so on.
Build product paths cannot reference locations outside of the Nix
store. We previously disallowed paths from being symlinks, but this
didn't take into account that parent path elements can be symlinks as
well. So a build product /nix/store/bla.../foo/passwd, with
/nix/store/bla.../foo being a symlink to /etc, would still work.
So now we check all paths encountered during path resolution.
Symlinks are allowed again so long as they point to the Nix store.
This is a followup to commit
10882a1ffd ("Add multiple output
support").
* src/script/hydra-eval-guile-jobs.in (job-evaluations->sxml): Return
several `output' tags in the body, and remove the `outPath' attribute
of `job'.
Chaining paths only works properly when PathPart is used. Before this
fix, the affected URIs bypassed the top-level 'admin' sub.
Signed-off-by: Shea Levy <shea@shealevy.com>
This reverts commit 71d020735b.
Unfortunately there are still some cases where we need to set Hydra's
concurrency separately. (Ideally, Hydra would start *all* queued
builds in parallel and let Nix take care of everything...)
So now "?compare=<jobset name>" is no longer a hidden feature!
P.S. Encountered this wonderful TemplateToolkit brainfuck again: if
you want to get the number of rows in (say) project.jobsets, you can't
say "project.jobsets.size". That will *usually* give the right
result, except that if there is only one row in project.jobsets, it
will evaluate to 3. Instead you have to use "project.jobsets_rs.count".
Note that on machines that support multiple system types, EACH system type gets the full number of build slots, which is almost certainly not what we want.
You can use the URL
http://<hydra-server>/api/push-github
as GitHub's WebHook URL. Hydra will automatically trigger an
evaluation of all affected jobsets.
External machines can now notify Hydra that it should check a
repository by sending a GET or PUSH request to /api/push, providing a
list of jobsets to be checked and/or a list of repository URLs. In
the latter case, all jobsets that have any of the specified
repositories as an input will be checked.
For instance, you can configure GitHub or BitBucket to send a request
to the URL
http://hydra.example.org/api/push?repos=git://github.com/NixOS/nixpkgs.git
to trigger evaluation of all jobsets that have
git://github.com/NixOS/nixpkgs.git as an input, or to the URL
http://hydra.example.org/api/push?jobsets=patchelf:trunk,nixpkgs:trunk
to trigger evaluation of just the specified jobsets.
Otherwise you can do
ln -s /etc/passwd $out/foo
echo "file misc $out/foo" >> $out/nix-support/hydra-build-products
and get Hydra to serve its /etc/passwd file.
Set a click handler on the table instead of on every row. This should
be faster on large tables. Also, it's easier to use: you just set the
clickable-rows class on the table, and the row-link class on the <a>
element that contains the "main" link of the row.
You can now just click on the evaluation link on the first tab to see
all builds in the same jobset. This also makes rendering build pages
quite a bit faster for jobsets like Nixpkgs.
