0
0
Fork 0
forked from lix-project/lix
Commit graph

111 commits

Author SHA1 Message Date
Shea Levy f9913f4422 Allow "bare" dynamic attrs
Now, in addition to a."${b}".c, you can write a.${b}.c (applicable
wherever dynamic attributes are valid).

Signed-off-by: Shea Levy <shea@shealevy.com>
2014-01-14 14:00:15 +01:00
Eelco Dolstra 7a61c88dbb Merge branch 'dynamic-attrs-no-sugar' of github.com:shlevy/nix 2014-01-06 15:46:18 +01:00
Eelco Dolstra 4252b5a645 Disable the tail call test
On i686-linux, GCC stubbornly refuses to do tail-call optimisation.
Don't know why.

http://hydra.nixos.org/build/7300170
2014-01-06 11:32:22 +01:00
Shea Levy 6f3a51809a Fold dynamic binds handling into addAttr
Since addAttr has to iterate through the AttrPath we pass it, it makes
more sense to just iterate through the AttrNames in addAttr instead. As
an added bonus, this allows attrsets where two dynamic attribute paths
have the same static leading part (see added test case for an example
that failed previously).

Signed-off-by: Shea Levy <shea@shealevy.com>
2013-12-31 17:57:10 -05:00
Shea Levy 18fefacf7d Dynamic attrs
This adds new syntax for attribute names:

* attrs."${name}" => getAttr name attrs
* attrs ? "${name}" => isAttrs attrs && hasAttr attrs name
* attrs."${name}" or def => if attrs ? "${name}" then attrs."${name}" else def
* { "${name}" = value; } => listToAttrs [{ inherit name value; }]

Of course, it's a bit more complicated than that. The attribute chains
can be arbitrarily long and contain combinations of static and dynamic
parts (e.g. attrs."${foo}".bar."${baz}" or qux), which is relatively
straightforward for the getAttrs/hasAttrs cases but is more complex for
the listToAttrs case due to rules about duplicate attribute definitions.

For attribute sets with dynamic attribute names, duplicate static
attributes are detected at parse time while duplicate dynamic attributes
are detected when the attribute set is forced. So, for example, { a =
null; a.b = null; "${"c"}" = true; } will be a parse-time error, while
{ a = {}; "${"a"}".b = null; c = true; } will be an eval-time error
(technically that case could theoretically be detected at parse time,
but the general case would require full evaluation). Moreover, duplicate
dynamic attributes are not allowed even in cases where they would be
with static attributes ({ a.b.d = true; a.b.c = false; } is legal, but {
a."${"b"}".d = true; a."${"b"}".c = false; } is not). This restriction
might be relaxed in the future in cases where the static variant would
not be an error, but it is not obvious that that is desirable.

Finally, recursive attribute sets with dynamic attributes have the
static attributes in scope but not the dynamic ones. So rec { a = true;
"${"b"}" = a; } is equivalent to { a = true; b = true; } but rec {
"${"a"}" = true; b = a; } would be an error or use a from the
surrounding scope if it exists.

Note that the getAttr, getAttr or default, and hasAttr are all
implemented purely in the parser as syntactic sugar, while attribute
sets with dynamic attribute names required changes to the AST to be
implemented cleanly.

This is an alternative solution to and closes 

Signed-off-by: Shea Levy <shea@shealevy.com>
2013-12-31 20:59:49 +00:00
Shea Levy 136f2f7046 Add the ExprBuiltin Expr type to the AST
Certain desugaring schemes may require the parser to use some builtin
function to do some of the work (e.g. currently `throw` is used to
lazily cause an error if a `<>`-style path is not in the search path)
Unfortunately, these names are not reserved keywords, so an expression
that uses such a syntactic sugar will not see the expected behavior
(see tests/lang/eval-okay-redefine-builtin.nix for an example).

This adds the ExprBuiltin AST type, which when evaluated uses the value
from the rootmost variable scope (which of course is initialized
internally and can't shadow any of the builtins).

Signed-off-by: Shea Levy <shea@shealevy.com>
2013-12-31 17:45:47 +00:00
Eelco Dolstra 77c13cdf56 Add a toJSON primop 2013-11-19 00:04:11 +01:00
Eelco Dolstra 285df765b9 Add a primop unsafeGetAttrPos to return the position of an attribute 2013-11-18 22:22:35 +01:00
Eelco Dolstra fc33fd86b7 Add a symbol __curPos that expands to the current source location
I.e. an attribute set { file = <string>; line = <int>; column = <int>; }.
2013-11-18 20:16:02 +01:00
Eelco Dolstra 2bcb384e95 Add a test to check that tail calls run in bounded stack space 2013-11-12 12:34:22 +01:00
Eelco Dolstra 5bc41d78ff Rename "attribute sets" to "sets"
We don't have any other kind of sets so calling them attribute sets is
unnecessarily verbose.
2013-10-24 16:41:04 +02:00
Eelco Dolstra 411a3461dc Add a test of the type primops 2013-10-24 02:51:28 +02:00
Eelco Dolstra 9d8a80375d Add a test for type correctness of antiquotes
Antiquotes should evaluate to strings or paths.  This is usually
checked, except in the case where the antiquote makes up the entire
string, as in "${expr}".  This is optimised to expr, which discards
the runtime type checks / coercions.
2013-10-17 00:51:07 +02:00
Eelco Dolstra b8571d68c4 Add a regression test for correct path antiquotation behavior
This broke in Nix 1.6.
2013-10-16 23:29:11 +02:00
Shea Levy afc6c1bad6 Simplify inherited attribute handling
This reduces the difference between inherited and non-inherited
attribute handling to the choice of which env to use (in recs and lets)
by setting the AttrDef::e to a new ExprVar in the parser rather than
carrying a separate AttrDef::v VarRef member.

As an added bonus, this allows inherited attributes that inherit from a
with to delay forcing evaluation of the with's attributes.

Signed-off-by: Shea Levy <shea@shealevy.com>
2013-08-26 11:31:56 +02:00
Ivan Kozik 34bb806f74 Fix typos, especially those that end up in the Nix manual 2013-08-26 11:15:22 +02:00
Eelco Dolstra 8e74c0bfd1 Let the ordering operators also work on strings
E.g. ‘"foo" < "bar"’ now works.
2013-08-02 18:53:02 +02:00
Eelco Dolstra 3d77b28eac Add comparison operators ‘<’, ‘<=’, ‘>’ and ‘>=’ 2013-08-02 18:39:40 +02:00
Eelco Dolstra 47701677e8 Add integer ‘-’, ‘*’ and ‘/’ operators 2013-08-02 16:03:02 +00:00
Eelco Dolstra 5d147e125c Add a unary integer negation operator
This allows saying "-1" instead of "builtins.sub 0 1".
2013-08-02 15:43:31 +00:00
Eelco Dolstra 159e621d1a Overload the ‘+’ operator to support integer addition 2013-08-02 15:21:17 +00:00
Eelco Dolstra 7df4ef983e Test the delayed with a bit more 2013-07-31 13:12:35 +02:00
Shea Levy 20866a7031 Delay evaulation of with attrs until a variable lookup needs them
Evaluation of attribute sets is strict in the attribute names, which
means immediate evaluation of `with` attribute sets rules out some
potentially interesting use cases (e.g. where the attribute names of one
set depend in some way on another but we want to bring those names into
scope for some values in the second set).

The major example of this is overridable self-referential package sets
(e.g. all-packages.nix). With immediate `with` evaluation, the only
options for such sets are to either make them non-recursive and
explicitly use the name of the overridden set in non-overridden one
every time you want to reference another package, or make the set
recursive and use the `__overrides` hack. As shown in the test case that
comes with this commit, though, delayed `with` evaluation allows a nicer
third alternative.

Signed-off-by: Shea Levy <shea@shealevy.com>
2013-07-31 11:48:39 +02:00
Eelco Dolstra 52172607cf Rename "hash" to "hashString" and handle SHA-1 2013-02-08 19:36:23 +01:00
Marc Weber 01a5ea9914 experimental/hash
adding primop function calculating hash of a string

Signed-off-by: Marc Weber <marco-oweber@gmx.de>
2013-02-08 19:26:34 +01:00
Eelco Dolstra 95c74eae26 Allow dashes in identifiers
In Nixpkgs, the attribute in all-packages.nix corresponding to a
package is usually equal to the package name.  However, this doesn't
work if the package contains a dash, which is fairly common.  The
convention is to replace the dash with an underscore (e.g. "dbus-lib"
becomes "dbus_glib"), but that's annoying.  So now dashes are valid in
variable / attribute names, allowing you to write:

  dbus-glib = callPackage ../development/libraries/dbus-glib { };

and

  buildInputs = [ dbus-glib ];

Since we don't have a negation or subtraction operation in Nix, this
is unambiguous.
2012-09-27 15:49:20 -04:00
Eelco Dolstra 126c7317bc * Add a test case for comparing derivations. 2012-01-19 22:10:24 +00:00
Eelco Dolstra 48cea0d01e * Refactoring: Get rid of a few subdirectories in corepkgs/, and some
other simplifications.
* Use <nix/...> to locate the corepkgs.  This allows them to be
  overriden through $NIX_PATH.
* Use bash's pipefail option in the NAR builder so that we don't need
  to create a temporary file.
2012-01-03 00:16:29 +00:00
Eelco Dolstra 3877619888 * Add some accidentally committed files. 2011-12-21 11:47:52 +00:00
Eelco Dolstra 07340b8be7 * Add the Nix corepkgs to the end of the search path. This makes it
possible for other Nix expressions to use corepkgs (mostly useful
  for the buildenv function).
2011-08-06 18:23:38 +00:00
Eelco Dolstra c7101dac0b * Allow redirections in search path entries. E.g. if you have a
directory

    /home/eelco/src/stdenv-updates

  that you want to use as the directory for import such as

    with (import <nixpkgs> { });

  then you can say

    $ nix-build -I nixpkgs=/home/eelco/src/stdenv-updates
2011-08-06 17:48:57 +00:00
Eelco Dolstra 1ecc97b6bd * Add a Nix expression search path feature. Paths between angle
brackets, e.g.

    import <nixpkgs/pkgs/lib>

  are resolved by looking them up relative to the elements listed in
  the search path.  This allows us to get rid of hacks like

    import "${builtins.getEnv "NIXPKGS_ALL"}/pkgs/lib"

  The search path can be specified through the ‘-I’ command-line flag
  and through the colon-separated ‘NIX_PATH’ environment variable,
  e.g.,

    $ nix-build -I /etc/nixos ...

  If a file is not found in the search path, an error message is
  lazily thrown.
2011-08-06 16:05:24 +00:00
Eelco Dolstra d5d4dcd4c9 * Allow attribute names to be strings. Based on the
allow-arbitrary-strinsg-in-names patch by Marc Weber.
2011-07-13 15:53:24 +00:00
Eelco Dolstra 0a623a10c7 * Allow a default value in attribute selection by writing
x.y.z or default

  (as originally proposed in
  https://mail.cs.uu.nl/pipermail/nix-dev/2009-September/002989.html).

  For instance, an expression like

    stdenv.lib.attrByPath ["features" "ckSched"] false args

  can now be written as

    args.features.ckSched or false
2011-07-13 12:19:57 +00:00
Eelco Dolstra 5580f3817c * Test case. 2011-07-06 10:58:53 +00:00
Eelco Dolstra 9db190eb31 * builtins.substring: if "start" is beyond the end of the string,
return the empty string.
2011-01-14 12:47:10 +00:00
Eelco Dolstra e0b7fb8f27 * Keep attribute sets in sorted order to speed up attribute lookups.
* Simplify the representation of attributes in the AST.
* Change the behaviour of listToAttrs() in case of duplicate names.
2010-10-24 19:52:33 +00:00
Eelco Dolstra 02934b1200 * Regression test for listToAttr's behaviour if an attribute name
occurs multiple times.
2010-10-23 22:55:30 +00:00
Eelco Dolstra cf7e645a48 * Regression test for __overrides. 2010-10-22 15:15:12 +00:00
Eelco Dolstra bd25ac2260 * Print attributes in sorted order. 2010-05-12 12:15:49 +00:00
Eelco Dolstra 81a4b4e49b * Implemented tryEval, the last missing primop in the fast-eval
branch.  Also added a test for tryEval.
2010-05-12 11:23:44 +00:00
Eelco Dolstra 83dfa89870 * Sync with the trunk. 2010-05-07 14:46:47 +00:00
Eelco Dolstra ebade9ff8b * Check for duplicate attribute names / function arguments. `make
check' now succeeds :-)
* An attribute set such as `{ foo = { enable = true; };
  foo.port = 23; }' now parses.  It was previously rejected, but I'm
  too lazy to implement the check.  (The only reason to reject it is
  that the reverse, `{ foo.port = 23; foo = { enable = true; }; }', is
  rejected, which is kind of ugly.)
2010-04-22 11:02:24 +00:00
Eelco Dolstra 7148df7971 * Update the expected test output (no longer an ATerm). 2010-04-21 16:22:03 +00:00
Eelco Dolstra cae4efdca3 * Because --parse-only no longer produces an ATerm, don't check the
output.  Whether it parses at all should be enough.
2010-04-21 16:02:12 +00:00
Eelco Dolstra 5187678913 2010-03-31 15:14:23 +00:00
Eelco Dolstra f061086a93 * Fix the broken test for listToAttrs. 2010-03-31 13:35:29 +00:00
Ludovic Courtès 09381cccff Make source location info in the XML output optional.
* src/libexpr/expr-to-xml.cc (nix::showAttrs): Add `location'
  parameter.  Provide location XML attributes when it's true.  Update
  callers.
  (nix::printTermAsXML): Likewise.

* src/libexpr/expr-to-xml.hh (nix::printTermAsXML): Update prototype;
  have `location' default to `false'.

* src/nix-instantiate/nix-instantiate.cc (printResult, processExpr): Add
  `location' parameter; update callers.
  (run): Add support for `--no-location'.

* src/nix-instantiate/help.txt: Update accordingly.

* tests/lang.sh: Invoke `nix-instantiate' with `--no-location' for the
  XML tests.

* tests/lang/eval-okay-toxml.exp, tests/lang/eval-okay-to-xml.nix: New
  files.
2010-03-31 12:38:31 +00:00
Eelco Dolstra 8a10360c91 * Simplify @-patterns: only {attrs}@name' or name@{attrs}' are now
allowed.  So `name1@name2', `{attrs1}@{attrs2}' and so on are now no
  longer legal.  This is no big loss because they were not useful
  anyway.

  This also changes the output of builtins.toXML for @-patterns
  slightly.
2010-03-25 12:19:41 +00:00
Eelco Dolstra 71be50cc25 * Doh. 2010-03-23 14:51:32 +00:00