* Buffer the HashSink. This speeds up hashing a bit because it
prevents lots of calls to the hash update functions (e.g. nix-hash
went from 9.3s to 8.7s of user time on the closure of my
/var/run/current-system).
significantly cuts down the number of syscalls (e.g., for "nix-store
-qR /var/run/current-system" via the daemon, it reduced the number
of syscalls in the client from 29134 to 4766 and in the daemon from
44266 to 20666).
daemon (which is an error), print a nicer error message than
"Connection reset by peer" or "broken pipe".
* In the daemon, log errors that occur during request parameter
processing.
‘nix-store --export’.
* Add a Perl module that provides the functionality of
‘nix-copy-closure --to’. This is used by build-remote.pl so it no
longer needs to start a separate nix-copy-closure process. Also, it
uses the Perl API to do the export, so it doesn't need to start a
separate nix-store process either. As a result, nix-copy-closure
and build-remote.pl should no longer fail on very large closures due
to an "Argument list too long" error. (Note that having very many
dependencies in a single derivation can still fail because the
environment can become too large. Can't be helped though.)
libstore so that the Perl bindings can use it as well. It's vital
that the Perl bindings use the configuration file, because otherwise
nix-copy-closure will fail with a ‘database locked’ message if the
value of ‘use-sqlite-wal’ is changed from the default.
For each output, this adds a corresponding attribute to the derivation that is
the same as the derivation except for outPath, which is set to the path specific
to that output. Additionally, an "all" attribute is added that is a list of all
of the output derivations. This has to be done outside of derivationStrict as
each output is itself a derivation that contains itself (and all other outputs)
as an attribute. The derivation itself is equivalent to the first output in the
outputs list (or "out" if that list isn't set).
the contents of any of the given store paths have been modified.
E.g.
$ nix-store --verify-path $(nix-store -qR /var/run/current-system)
path `/nix/store/m2smyiwbxidlprfxfz4rjlvz2c3mg58y-etc' was modified! expected hash `fc87e271c5fdf179b47939b08ad13440493805584b35e3014109d04d8436e7b8', got `20f1a47281b3c0cbe299ce47ad5ca7340b20ab34246426915fce0ee9116483aa'
All paths are checked; the exit code is 1 if any path has been
modified, 0 otherwise.
This should also fix:
nix-instantiate: ./../boost/shared_ptr.hpp:254: T* boost::shared_ptr<T>::operator->() const [with T = nix::StoreAPI]: Assertion `px != 0' failed.
which was caused by hashDerivationModulo() calling the ‘store’
object (during store upgrades) before openStore() assigned it.
prevents files from being evaluated and stored as values multiple
times. For instance, evaluation of the ‘system’ attribute in NixOS
causes ‘nixpkgs/pkgs/lib/lists.nix’ to be evaluated 2019 times.
Caching gives a modest speedup and a decent memory footprint
reduction (e.g., from 1.44s to 1.28s, and from 81 MiB to 59 MiB with
GC_INITIAL_HEAP_SIZE=100000 on my system).
directory
/home/eelco/src/stdenv-updates
that you want to use as the directory for import such as
with (import <nixpkgs> { });
then you can say
$ nix-build -I nixpkgs=/home/eelco/src/stdenv-updates
brackets, e.g.
import <nixpkgs/pkgs/lib>
are resolved by looking them up relative to the elements listed in
the search path. This allows us to get rid of hacks like
import "${builtins.getEnv "NIXPKGS_ALL"}/pkgs/lib"
The search path can be specified through the ‘-I’ command-line flag
and through the colon-separated ‘NIX_PATH’ environment variable,
e.g.,
$ nix-build -I /etc/nixos ...
If a file is not found in the search path, an error message is
lazily thrown.
derivations added to the store by clients have "correct" output
paths (meaning that the output paths are computed by hashing the
derivation according to a certain algorithm). This means that a
malicious user could craft a special .drv file to build *any*
desired path in the store with any desired contents (so long as the
path doesn't already exist). Then the attacker just needs to wait
for a victim to come along and install the compromised path.
For instance, if Alice (the attacker) knows that the latest Firefox
derivation in Nixpkgs produces the path
/nix/store/1a5nyfd4ajxbyy97r1fslhgrv70gj8a7-firefox-5.0.1
then (provided this path doesn't already exist) she can craft a .drv
file that creates that path (i.e., has it as one of its outputs),
add it to the store using "nix-store --add", and build it with
"nix-store -r". So the fake .drv could write a Trojan to the
Firefox path. Then, if user Bob (the victim) comes along and does
$ nix-env -i firefox
$ firefox
he executes the Trojan injected by Alice.
The fix is to have the Nix daemon verify that derivation outputs are
correct (in addValidPath()). This required some refactoring to move
the hash computation code to libstore.
by setting the ‘outputs’ attribute. For example:
stdenv.mkDerivation {
name = "aterm-2.5";
src = ...;
outputs = [ "out" "tools" "dev" ];
configureFlags = "--bindir=$(tools)/bin --includedir=$(dev)/include";
}
This derivation creates three outputs, named like this:
/nix/store/gcnqgllbh01p3d448q8q6pzn2nc2gpyl-aterm-2.5
/nix/store/gjf1sgirwfnrlr0bdxyrwzpw2r304j02-aterm-2.5-tools
/nix/store/hp6108bqfgxvza25nnxfs7kj88xi2vdx-aterm-2.5-dev
That is, the symbolic name of the output is suffixed to the store
path (except for the ‘out’ output). Each path is passed to the
builder through the corresponding environment variable, e.g.,
${tools}.
The main reason for multiple outputs is to allow parts of a package
to be distributed and garbage-collected separately. For instance,
most packages depend on Glibc for its libraries, but don't need its
header files. If these are separated into different store paths,
then a package that depends on the Glibc libraries only causes the
libraries and not the headers to be downloaded.
The main problem with multiple outputs is that if one output exists
while the others have been garbage-collected (or never downloaded in
the first place), and we want to rebuild the other outputs, then
this isn't possible because we can't clobber a valid output (it
might be in active use). This currently gives an error message
like:
error: derivation `/nix/store/1s9zw4c8qydpjyrayxamx2z7zzp5pcgh-aterm-2.5.drv' is blocked by its output paths
There are two solutions: 1) Do the build in a chroot. Then we don't
need to overwrite the existing path. 2) Use hash rewriting (see the
ASE-2005 paper). Scary but it should work.
This is not finished yet. There is not yet an easy way to refer to
non-default outputs in Nix expressions. Also, mutually recursive
outputs aren't detected yet and cause the garbage collector to
crash.
write ‘attrs ? a.b’ to test whether ‘attrs’ has an attribute ‘a’
containing an attribute ‘b’. This is more convenient than ‘attrs ?
a && attrs.a ? b’.
Slight change in the semantics: it's no longer an error if the
left-hand side of ‘?’ is not an attribute set. In that case it just
returns false. So, ‘null ? foo’ no longer throws an error.
checked too soon whether substitutes are available. That is, it did
so for every available package, rather than those matching installed
packages. This was very slow and subject to assertion failures. So
do the check much later. Idem for `nix-env -qab' and `nix-env -ib'.
little RAM. Even if the memory isn't actually used, it can cause
problems with the overcommit heuristics in the kernel. So use a VM
space of 25% of RAM, up to 384 MB.
while checking the contents, since this operation can take a very
long time to finish. Also, fill in missing narSize fields in the DB
while doing this.
even with a very long busy timeout, because SQLITE_BUSY is also
returned to resolve deadlocks. This should get rid of random
"database is locked" errors. This is kind of hard to test though.
* Fix a horrible bug in deleteFromStore(): deletePathWrapped() should
be called after committing the transaction, not before, because the
commit might not succeed.
tree). This saves a lot of memory. The vector should be sorted so
that names can be looked up using binary search, but this is not the
case yet. (Surprisingly, looking up attributes using linear search
doesn't have a big impact on performance.)
Memory consumption for
$ nix-instantiate /etc/nixos/nixos/tests -A bittorrent.test --readonly-mode
on x86_64-linux with GC enabled is now 185 MiB (compared to 946
MiB on the trunk).
improves GC effectiveness a bit more (because a live value doesn't
keep other values in the environment plus the parent environments
alive), and removes the need for copy nodes.
a pointer to a Value, rather than the Value directly. This improves
the effectiveness of garbage collection a lot: if the Value is
stored inside the set directly, then any live pointer to the Value
causes all other attributes in the set to be live as well.
race with other processes that add new referrers to a path,
resulting in the garbage collector crashing with "foreign key
constraint failed". (Nix/4)
* Make --gc --print-dead etc. interruptible.
because it defines _FILE_OFFSET_BITS. Without this, on
OpenSolaris the system headers define it to be 32, and then
the 32-bit stat() ends up being called with a 64-bit "struct
stat", or vice versa.
This also ensures that we get 64-bit file sizes everywhere.
* Remove the redundant call to stat() in parseExprFromFile().
The file cannot be a symlink because that's the exit condition
of the loop before.
exception handler, otherwise throw an exception. We need to ignore
write errors in exception handlers to ensure that cleanup code runs
to completion if the other side of stderr has been closed
unexpectedly.
* If a path has disappeared, check its referrers first, and don't try
to invalidate paths that have valid referrers. Otherwise we get a
foreign key constraint violation.
* Read the whole Nix store directory instead of statting each valid
path, which is slower.
* Acquire the global GC lock.
hook script proper, and the stdout/stderr of the builder. Only the
latter should be saved in /nix/var/log/nix/drvs.
* Allow the verbosity to be set through an option.
* Added a flag --quiet to lower the verbosity level.
it requires a certain feature on the build machine, e.g.
requiredSystemFeatures = [ "kvm" ];
We need this in Hydra to make sure that builds that require KVM
support are forwarded to machines that have KVM support. Probably
this should also be enforced for local builds.
the hook every time we want to ask whether we can run a remote build
(which can be very often), we now reuse a hook process for answering
those queries until it accepts a build. So if there are N
derivations to be built, at most N hooks will be started.
faster than the old mode when fsyncs are enabled, because it only
performs an fsync() when doing a checkpoint, rather than at every
commit. Some timings for doing a "nix-instantiate /etc/nixos/nixos
-A system" after modifying the stdenv setup script:
42.5s - SQLite 3.6.23 with truncate mode and fsync
3.4s - SQLite 3.6.23 with truncate mode and no fsync
32.1s - SQLite 3.7.0 with truncate mode and fsync
16.8s - SQLite 3.7.0 with WAL mode and fsync, auto-checkpoint
every 1000 pages
8.3s - SQLite 3.7.0 with WAL mode and fsync, auto-checkpoint
every 8192 pages
1.7s - SQLite 3.7.0 with WAL mode and no fsync
The default is now to use WAL mode with fsyncs. Because WAL doesn't
work on remote filesystems such as NFS (as it uses shared memory),
truncate mode can be re-enabled by setting the "use-sqlite-wal"
option to false.
using the build hook mechanism, by setting the derivation attribute
"preferLocalBuild" to true. This has a few use cases:
- The user environment builder. Since it just creates a bunch of
symlinks without much computation, there is no reason to do it
remotely. In fact, doing it remotely requires the entire closure
of the user environment to be copied to the remote machine, which
is extremely wasteful.
- `fetchurl'. Performing the download on a remote machine and then
copying it to the local machine involves twice as much network
traffic as performing the download locally, and doesn't save any
CPU cycles on the local machine.
instance) "nix-env -i wine" works on x86_64-linux, even though Wine
is built on i686-linux. In the event that there are multiple
matching derivations, prefer those built for the current system.
An "using namespace std" was added locally in those functions that refer to
names from <cstring>. That is not pretty, but it's a very portable solution,
because strcpy() and friends will be found in both the 'std' and in the global
namespace.
This patch adds the configuration file variable "build-cores" and the
command line argument "--cores". These settings specify the number of
CPU cores to utilize for parallel building within a job, i.e. by passing
an appropriate "-j" flag to GNU Make. The default value is 1, which
means that parallel building is *disabled*. If the number of build cores
is specified as 0 (synonymously: "guess" or "auto"), then the actual
value is supposed to be auto-detected by builders at run-time, i.e by
calling the nproc(1) utility from coreutils.
The environment variable $NIX_BUILD_CORES is available to builders, but
the contents of that variable does *not* influence the hash that goes
into the $out store path, i.e. the number of build cores to be utilized
can be changed at will without requiring any re-builds.
doesn't work because the garbage collector doesn't actually look at
locks. So r22253 was stupid. Use addTempRoot() instead. Also,
locking the temporary directory in exportPath() was silly because it
isn't even in the store.
errors with position info.
* For all positions, use the position of the first character of the
first token, rather than the last character of the first token plus
one.
check' now succeeds :-)
* An attribute set such as `{ foo = { enable = true; };
foo.port = 23; }' now parses. It was previously rejected, but I'm
too lazy to implement the check. (The only reason to reject it is
that the reverse, `{ foo.port = 23; foo = { enable = true; }; }', is
rejected, which is kind of ugly.)
values. This improves sharing and gives another speed up.
Evaluation of the NixOS system attribute is now almost 7 times
faster than the old evaluator.
use site, allowing environments to be stores as vectors of values
rather than maps. This should speed up evaluation and reduce the
number of allocations.
precedence, i.e. `with {x=1;}; with {x=2;}; x' evaluates to 2'.
This has a simpler implementation and seems more natural. There
doesn't seem to be any code in Nixpkgs or NixOS that relies on the
old behaviour.
efficiently. The symbol table ensures that there is only one copy
of each symbol, thus allowing symbols to be compared efficiently
using a pointer equality test.
This fixes a regression introduced in r20882 ("Add source location
information to the XML output.").
* src/libexpr/expr-to-xml.cc (nix::printTermAsXML): Dereference the
attribute RHS from "drvPath" and "outPath".
then the blackhole has to be removed to ensure that repeated
evaluation of the same value gives an assertion failure again rather
than an "infinite recursion" error.
that there are some places in Nixpkgs (php_configurable /
composableDerivation, it seems) that call `derivation' with
incorrect arguments (namely, the `name' attribute missing) but get
away with it because of laziness.
* Removed exprToString and stringToExpr because there is no ATerm
representation to work on anymore (and exposing the internals of the
evaluator like this is not a good idea anyway).
* src/libexpr/expr-to-xml.cc (nix::showAttrs): Add `location'
parameter. Provide location XML attributes when it's true. Update
callers.
(nix::printTermAsXML): Likewise.
* src/libexpr/expr-to-xml.hh (nix::printTermAsXML): Update prototype;
have `location' default to `false'.
* src/nix-instantiate/nix-instantiate.cc (printResult, processExpr): Add
`location' parameter; update callers.
(run): Add support for `--no-location'.
* src/nix-instantiate/help.txt: Update accordingly.
* tests/lang.sh: Invoke `nix-instantiate' with `--no-location' for the
XML tests.
* tests/lang/eval-okay-toxml.exp, tests/lang/eval-okay-to-xml.nix: New
files.
* src/libexpr/expr-to-xml.cc (nix::showAttrs): Dereference the attribute
RHS. Add "path", "line", and "column" XML attributes to the node when
source location information is available.
(nix::printTermAsXML): Likewise for functions.
allowed. So `name1@name2', `{attrs1}@{attrs2}' and so on are now no
longer legal. This is no big loss because they were not useful
anyway.
This also changes the output of builtins.toXML for @-patterns
slightly.
changed. This prevents corrupt paths from spreading to other
machines. Note that checking the hash is cheap because we're
hashing anyway (because of the --sign feature).
to make the Refs table more space-efficient. For instance, this
reduces the size of the database on my laptop from 93 MiB to 18
MiB. (It was 72 MiB with the old schema on an ext3 disk with a 1
KiB block size.)
This prevents remote builders from being killed by the
`max-silent-time' inactivity monitor while they are waiting for a
long garbage collection to finish. This happens fairly often in the
Hydra build farm.
_FILE_OFFSET_BITS=64. Without it, functions like stat() fail on
large file sizes. This happened with a Nix store on squashfs:
$ nix-store --dump /tmp/mnt/46wzqnk4cbdwh1dclhrpqnnz1icak6n7-local-net-cmds > /dev/null
error: getting attributes of path `/tmp/mnt/46wzqnk4cbdwh1dclhrpqnnz1icak6n7-local-net-cmds': Value too large for defined data type
$ stat /tmp/mnt/46wzqnk4cbdwh1dclhrpqnnz1icak6n7-local-net-cmds
File: `/tmp/mnt/46wzqnk4cbdwh1dclhrpqnnz1icak6n7-local-net-cmds'
Size: 0 Blocks: 36028797018963968 IO Block: 1024 regular empty file
(This is a bug in squashfs or mksquashfs, but it shouldn't cause Nix
to fail.)
complete set of live and dead paths before starting the actual
deletion, but determines liveness on demand. I.e. for any path in
the store, it first tries to delete all the referrers, and then the
path itself. This means that the collector can start deleting paths
almost immediately.
(Linux) machines no longer maintain the atime because it's too
expensive, and on the machines where --use-atime is useful (like the
buildfarm), reading the atimes on the entire Nix store takes way too
much time to make it practical.
intersectAttrs returns the (right-biased) intersection between two
attribute sets, e.g. every attribute from the second set that also
exists in the first. functionArgs returns the set of attributes
expected by a function.
The main goal of these is to allow the elimination of most of
all-packages.nix. Most package instantiations in all-packages.nix
have this form:
foo = import ./foo.nix {
inherit a b c;
};
With intersectAttrs and functionArgs, this can be written as:
foo = callPackage (import ./foo.nix) { };
where
callPackage = f: args:
f ((builtins.intersectAttrs (builtins.functionArgs f) pkgs) // args);
I.e., foo.nix is called with all attributes from "pkgs" that it
actually needs (e.g., pkgs.a, pkgs.b and pkgs.c). (callPackage can
do any other generic package-level stuff we might want, such as
applying makeOverridable.) Of course, the automatically supplied
arguments can be overriden if needed, e.g.
foo = callPackage (import ./foo.nix) {
c = c_version_2;
};
but for the vast majority of packages, this won't be needed.
The advantages are to reduce the amount of typing needed to add a
dependency (from three sites to two), and to reduce the number of
trivial commits to all-packages.nix. For the former, there have
been two previous attempts:
- Use "args: with args;" in the package's function definition.
This however obscures the actual expected arguments of a
function, which is very bad.
- Use "{ arg1, arg2, ... }:" in the package's function definition
(i.e. use the ellipis "..." to allow arbitrary additional
arguments), and then call the function with all of "pkgs" as an
argument. But this inhibits error detection if you call it with
an misspelled (or obsolete) argument.
NixOS evaluation errors in particular look intimidating and
generally aren't very useful. Ideally the builtins.throw messages
should be self-contained.
UTC) rather than 0 (00:00:00). 1 is a better choice because some
programs use 0 as a special value. For instance, the Template
Toolkit uses a timestamp of 0 to denote the non-existence of a file,
so it barfs on files in the Nix store (see
template-toolkit-nix-store.patch in Nixpkgs). Similarly, Maya 2008
fails to load script directories with a timestamp of 0 and can't be
patched because it's closed source.
This will also shut up those "implausibly old time stamp" GNU tar
warnings.
attributes of the rec are in scope of `e'. This is useful in
expressions such as
rec {
lib = import ./lib;
inherit (lib) concatStrings;
}
It does change the semantics of expressions such as
let x = {y = 1;}; in rec { x = {y = 2;}; inherit (x) y; }.y
This now returns 2 instead of 1. However, no code in Nixpkgs or
NixOS seems to rely on the old behaviour.
shorthand for {x = {y = {z = ...;};};}. This is especially useful
for NixOS configuration files, e.g.
{
services = {
sshd = {
enable = true;
port = 2022;
};
};
}
can now be written as
{
services.sshd.enable = true;
services.sshd.port = 2022;
}
However, it is currently not permitted to write
{
services.sshd = {enable = true;};
services.sshd.port = 2022;
}
as this is considered a duplicate definition of `services.sshd'.
broken, but now the evaluator checks for it to prevent Nix
expressions from relying on undefined behaviour. Equality tests are
implemented using a shallow pointer equality test between ATerms.
However, because attribute sets are lazy and contain position
information, this can give false positives. For instance,
previously
let y = {x = 1;}; in y == y
evaluated to true, while the equivalent expression
{x = 1;} == {x = 1;}
evaluated to false. So disallow these tests for now. (Eventually
we may want to implement deep equality tests for attribute sets,
like lib.eqStrict.)
* Idem: disallow comparisons between functions.
* Implemented deep comparisons of lists. This had the same problem as
attribute sets - the elements in the list weren't evaluated. For
instance,
["xy"] == [("x" + "y")]
evaluated to false. Now it works properly.
(that is, call the build hook with a certain interval until it
accepts the build).
* build-remote.pl was totally broken: for all system types other than
the local system type, it would send all builds to the *first*
machine of the appropriate type.
poll for it (i.e. if we can't acquire the lock, then let the main
select() loop wait for at most a few seconds and then try again).
This improves parallelism: if two nix-store processes are both
trying to build a path at the same time, the second one shouldn't
block; it should first see if it can build other goals. Also, it
prevents the deadlocks that have been occuring in Hydra lately,
where a process waits for a lock held by another process that's
waiting for a lock held by the first.
The downside is that polling isn't really elegant, but POSIX doesn't
provide a way to wait for locks in a select() loop. The only
solution would be to spawn a thread for each lock to do a blocking
fcntl() and then signal the main thread, but that would require
pthreads.
would just silently store only (fileSize % 2^32) bytes.
* Use posix_fallocate if available when unpacking archives.
* Provide a better error message when trying to unpack something that
isn't a NAR archive.
sure that it works as expected when you pass it a derivation. That
is, we have to make sure that all build-time dependencies are built,
and that they are all in the input closure (otherwise remote builds
might fail, for example). This is ensured at instantiation time by
adding all derivations and their sources to inputDrvs and inputSrcs.
hook. This fixes a problem with log files being partially or
completely filled with 0's because another nix-store process
truncates the log file. It should also be more efficient.
the DerivationGoal runs. Otherwise, if a goal is a top-level goal,
then the lock won't be released until nix-store finishes. With
--keep-going and lots of top-level goals, it's possible to run out
of file descriptors (this happened sometimes in the build farm for
Nixpkgs). Also, for failed derivation, it won't be possible to
build it again until the lock is released.
* Idem for locks on build users: these weren't released in a timely
manner for failed top-level derivation goals. So if there were more
than (say) 10 such failed builds, you would get an error about
having run out of build users.
scan for runtime dependencies (i.e. the local machine shouldn't do a
scan that the remote machine has already done). Also pipe directly
into `nix-store --import': don't use a temporary file.
(e.g. an SSH connection problem) and permanent failures (i.e. the
builder failed). This matters to Hydra (it wants to know whether it
makes sense to retry a build).
allocate memory, which is verboten in signal handlers. This caused
random failures in the test suite on Mac OS X (triggered by the spurious
SIGPOLL signals on Mac OS X, which should also be fixed).
closure of the inputs. This really enforces that there can't be any
undeclared dependencies on paths in the store. This is done by
creating a fake Nix store and creating bind-mounts or hard-links in
the fake store for all paths in the closure. After the build, the
build output is moved from the fake store to the real store. TODO:
the chroot has to be on the same filesystem as the Nix store for
this to work, but this isn't enforced yet. (I.e. it only works
currently if /tmp is on the same FS as /nix/store.)
bind-mounts we do are only visible to the builder process and its
children. So accidentally doing "rm -rf" on the chroot directory
won't wipe out /nix/store and other bind-mounted directories
anymore. Also, the bind-mounts in the private namespace disappear
automatically when the builder exits.
necessary that at least one build hook doesn't return "postpone",
otherwise nix-store will barf ("waiting for a build slot, yet there
are no running children"). So inform the build hook when this is
the case, so that it can start a build even when that would exceed
the maximum load on a machine.
nix-store -r (or some other operation) is started via ssh, it will
at least have a chance of terminating quickly when the connection is
killed. Right now it just runs to completion, because it never
notices that stderr is no longer connected to anything. Of course
it would be better if sshd would just send a SIGHUP, but it doesn't
(https://bugzilla.mindrot.org/show_bug.cgi?id=396).
derivation should be a source rather than a derivation dependency of
the call to the NAR derivation. Otherwise the derivation (and all
its dependencies) will be built as a side-effect, which may not even
succeed.
SHA-256 outputs of fixed-output derivations. I.e. they now produce
the same store path:
$ nix-store --add x
/nix/store/j2fq9qxvvxgqymvpszhs773ncci45xsj-x
$ nix-store --add-fixed --recursive sha256 x
/nix/store/j2fq9qxvvxgqymvpszhs773ncci45xsj-x
the latter being the same as the path that a derivation
derivation {
name = "x";
outputHashAlgo = "sha256";
outputHashMode = "recursive";
outputHash = "...";
...
};
produces.
This does change the output path for such fixed-output derivations.
Fortunately they are quite rare. The most common use is fetchsvn
calls with SHA-256 hashes. (There are a handful of those is
Nixpkgs, mostly unstable development packages.)
* Documented the computation of store paths (in store-api.cc).
dependency. `storePath /nix/store/bla' gives exactly the same
result as `toPath /nix/store/bla', except that the former includes
/nix/store/bla in the dependency context of the string.
Useful in some generated Nix expressions like nix-push, which now
finally does the right thing wrt distributed builds. (Previously
the path to be packed wasn't an explicit dependency, so it wouldn't
be copied to the remote machine.)
subtle and often hard-to-reproduce bugs where programs in pipes
either barf with a "Broken pipe" message or not, depending on the
exact timing conditions. This particularly happened in GNU M4 (and
Bison, which uses M4).
disasters involving `rm -rf' on bind mounts. Will try the
definitive fix (per-process mounts, apparently possible via the
CLONE_NEWNS flag in clone()) some other time.
accessed time of paths that may be deleted. Anything more recently
used won't be deleted. The time is specified in time_t,
e.g. seconds since 1970-01-01 00:00:00 UTC; use `date +%s' to
convert to time_t from the command line.
Example: to delete everything that hasn't been used in the last two
months:
$ nix-store --gc -v --max-atime $(date +%s -d "2 months ago")
order of ascending last access time. This is useful in conjunction
with --max-freed or --max-links to prefer deleting non-recently used
garbage, which is good (especially in the build farm) since garbage
may become live again.
The code could easily be modified to accept other criteria for
ordering garbage by changing the comparison operator used by the
priority queue in collectGarbage().
attributes from the meta attribute. Not doing so caused nix-env to
barf on the "psi" package, which has a meta.function attribute,
the textual serialisation of which causes a gigantic string to be
produced --- so big that it causes nix-env to run out of memory.
Note however that "meta" really only should contain strings.
meta.function should be passthru.function.
particular, dietlibc cannot figure out the cwd because the inode of
the current directory doesn't appear in .. (because getdents returns
the inode of the mount point).
(which means it can only be defined via "inherit"), otherwise we get
scoping bugs, since __overrides can't be recursive (or at least, it
would be hard).
need /etc in the chroot (in particular, /etc/resolv.conf for
fetchurl). Not having /etc/resolv.conf in the chroot is a good
thing, since we don't want normal derivations to download files.
~/.nix-defexpr, otherwise the attribute cannot be selected with the
`-A' option. Useful if you want to stick a Nix expression directly
in ~/.nix-defexpr.
a rec. This will be very useful to allow end-user customisation of
all-packages.nix, for instance globally overriding GCC or some other
dependency. The // operator doesn't cut it: you could replace the
"gcc" attribute, but all other attributes would continue to
reference the original value due to the substitution semantics of
rec.
The syntax is a bit hacky but this is to allow backwards
compatibility.
in attribute set pattern matches. This allows defining a function
that takes *at least* the listed attributes, while ignoring
additional attributes. For instance,
{stdenv, fetchurl, fuse, ...}:
stdenv.mkDerivation {
...
};
defines a function that requires an attribute set that contains the
specified attributes but ignores others. The main advantage is that
we can then write in all-packages.nix
aefs = import ../bla/aefs pkgs;
instead of
aefs = import ../bla/aefs {
inherit stdenv fetchurl fuse;
};
This saves a lot of typing (not to mention not having to update
all-packages.nix with purely mechanical changes). It saves as much
typing as the "args: with args;" style, but has the advantage that
the function arguments are properly declared (not implicit in what
the body of the "with" uses).
functions that take a single argument (plain lambdas) into one AST
node (Function) that contains a Pattern node describing the
arguments. Current patterns are single lazy arguments (VarPat) and
matching against an attribute set (AttrsPat).
This refactoring allows other kinds of patterns to be added easily,
such as Haskell-style @-patterns, or list pattern matching.
`-u'. Instead of acquiring an exclusive lock on the profile for the
entire duration of the operation, we just perform the operation
optimistically (without an exclusive lock), and check at the end
whether the profile changed while we were busy (i.e., the symlink
target changed). If so, the operation is restarted. Restarting is
generally cheap, since the build results are still in the Nix store.
Most of the time, only the user environment has to be rebuilt.
again. (After the previous substituter mechanism refactoring I
didn't update the code that obtains the references of substitutable
paths.) This required some refactoring: the substituter programs
are now kept running and receive/respond to info requests via
stdin/stdout.
it only does something if $NIX_OTHER_STORES (not really a good
name...) is set.
* Do globbing on the elements of $NIX_OTHER_STORES. E.g. you could
set it to /mnts/*/nix or something.
* Install substituters in libexec/nix/substituters.
logic through the `parseDrvName' and `compareVersions' primops.
This will allow expressions to easily check whether some dependency
is a specific needed version or falls in some version range. See
tests/lang/eval-okay-versions.nix for examples.
bytes have been freed, `--max-links' to stop when the Nix store
directory has fewer than N hard links (the latter being important
for very large Nix stores on filesystems with a 32000 subdirectories
limit).
store under the reference relation, since that means that the
garbage collector will need a long time to start deleting paths.
Instead just delete the referrers of a path first.
This isn't usually a problem, except that it causes tests to fail
when performed in a directory with a very long path name. So chdir
to the socket directory and use a relative path name.
/tmp/nix-<pid>-<counter> for temporary build directories. This
increases purity a bit: many packages store the temporary build path
in their output, causing (generally unimportant) binary differences.
undefined variables by definition. This matters for the
implementation of "with", which does a call to checkVarDefs to see
if the body of the with has no undefined variables. (It can't be
checked at parse time because you don't know which variables are in
the "with" attribute set.) If we check closed terms, then we check
not just the with body but also the substituted terms, which are
typically very large. This is the cause of the poor nix-env
performance on Nixpkgs lately. It didn't happen earlier because
"with" wasn't used very often in the past.
This fix improves nix-env performance roughly 60x on current Nixpkgs.
nix-env -qa is down from 29.3s to 0.5s on my laptop, and nix-env -qa
--out-path is down from 229s to 3.39s. Not bad for a 1-line fix :-)
single quotes. Example (from NixOS):
job = ''
start on network-interfaces
start script
rm -f /var/run/opengl-driver
${if videoDriver == "nvidia"
then "ln -sf ${nvidiaDrivers} /var/run/opengl-driver"
else if cfg.driSupport
then "ln -sf ${mesa} /var/run/opengl-driver"
else ""
}
rm -f /var/log/slim.log
end script
'';
This style has two big advantages:
- \, ' and " aren't special, only '' and ${. So you get a lot less
escaping in shell scripts / configuration files in Nixpkgs/NixOS.
The delimiter '' is rare in scripts (and can usually be written as
""). ${ is also fairly rare.
Other delimiters such as <<...>>, {{...}} and <|...|> were also
considered but this one appears to have the fewest drawbacks
(thanks Martin).
- Indentation is intelligently stripped so that multi-line strings
can follow the nesting structure of the containing Nix
expression. E.g. in the example above 6 spaces are stripped from
the start of each line. This prevents unnecessary indentation in
generated files (which sometimes even breaks things).
See tests/lang/eval-okay-ind-string.nix for some examples.
$ nix-env -e $(which firefox)
or
$ nix-env -e /nix/store/nywzlygrkfcgz7dfmhm5xixlx1l0m60v-pan-0.132
* nix-env -i: if an argument contains a slash anywhere, treat it as a
path and follow it through symlinks into the Nix store. This allows
things like
$ nix-build -A firefox
$ nix-env -i ./result
* nix-env -q/-i/-e: don't complain when the `*' selector doesn't match
anything. In particular, `nix-env -q \*' doesn't fail anymore on an
empty profile.
but installations/upgrades as well. So `nix-env -ub \*' will
upgrade only those packages for which a substitute is available (or
to be precise, it will upgrade each package to the highest version
for which a substitute is available).
executed in a chroot that contains just the Nix store, the temporary
build directory, and a configurable set of additional directories
(/dev and /proc by default). This allows a bit more purity
enforcement: hidden build-time dependencies on directories such as
/usr or /nix/var/nix/profiles are no longer possible. As an added
benefit, accidental network downloads (cf. NIXPKGS-52) are prevented
as well (because files such as /etc/resolv.conf are not available in
the chroot).
However the usefulness of chroots is diminished by the fact that
many builders depend on /bin/sh, so you need /bin in the list of
additional directories. (And then on non-NixOS you need /lib as
well...)
usage by finding identical files in the store and hard-linking them
to each other. It typically reduces the size of the store by
something like 25-35%. This is what the optimise-store.pl script
did, but the new command is faster and more correct (it's safe wrt
garbage collection and concurrent builds).
the given attribute path (just as -A does with other option)
(NIX-83). So you can now say
$ nix-env -qa -A nixpkgs_unstable.gnome \*
atk-1.12.4
esound-0.2.36
...
to see the packages in the "gnome" attribute in Nixpkgs.
To *print* the attribute path, you should now use "--attr-path" /
"-P" (running out of letters...).
Nix expressions in that directory are combined into an attribute set
{file1 = import file1; file2 = import file2; ...}, i.e. each Nix
expression is an attribute with the file name as the attribute
name. Also recurses into directories.
* nix-env: removed the "--import" (-I) option which set the
~/.nix-defexpr symlink.
* nix-channel: don't use "nix-env --import", instead symlink
~/.nix-defexpr/channels. So finally nix-channel --update doesn't
override any default Nix expressions but combines with them.
This means that you can have (say) a local Nixpkgs SVN tree and use
it as a default for nix-env:
$ ln -s .../path-to-nixpkgs-tree ~/.nix-defexpr/nixpkgs_svn
and be subscribed to channels (including Nixpkgs) at the same time.
(If there is any ambiguity, the -A flag can be used to
disambiguate, e.g. "nix-env -i -A nixpkgs_svn.pan".)
(/nix/var/nix/daemon-socket). This allows access to the Nix daemon
to be restricted by setting the mode/ownership on that directory as
desired, e.g.
$ chmod 770 /nix/var/nix/daemon-socket
$ chown root.wheel /nix/var/nix/daemon-socket
to allow only users in the wheel group to use Nix.
Setting the ownership on a socket is much trickier, since the socket
must be deleted and recreated every time the daemon is started
(which would require additional Nix configuration file directives to
specify the mode/ownership, and wouldn't support arbitrary ACLs),
some BSD variants appear to ignore permissions on sockets, and it's
not clear whether the umask is respected on every platform when
creating sockets.
fixed-output derivations or substitutions try to build the same
store path at the same time. Locking generally catches this, but
not between multiple goals in the same process. This happened
especially often (actually, only) in the build farm with fetchurl
downloads of the same file being executed on multiple machines and
then copied back to the main machine where they would clobber each
other (NIXBF-13).
Solution: if a goal notices that the output path is already locked,
then go to sleep until another goal finishes (hopefully the one
locking the path) and try again.
need any info on substitutable paths, we just call the substituters
(such as download-using-manifests.pl) directly. This means that
it's no longer necessary for nix-pull to register substitutes or for
nix-channel to clear them, which makes those operations much faster
(NIX-95). Also, we don't have to worry about keeping nix-pull
manifests (in /nix/var/nix/manifests) and the database in sync with
each other.
The downside is that there is some overhead in calling an external
program to get the substitutes info. For instance, "nix-env -qas"
takes a bit longer.
Abolishing the substitutes table also makes the logic in
local-store.cc simpler, as we don't need to store info for invalid
paths. On the downside, you cannot do things like "nix-store -qR"
on a substitutable but invalid path (but nobody did that anyway).
* Never catch interrupts (the Interrupted exception).
;-)
* Channels: fix channels that are plain lists of derivations (like
strategoxt-unstable) instead of functions (like nixpkgs-unstable).
This fixes the error message "error: the left-hand side of the
function call is neither a function nor a primop (built-in
operation) but a list".
get the basename of the channel URL (e.g., nixpkgs-unstable). The
top-level Nix expression of the channel is now an attribute set, the
attributes of which are the individual channels (e.g.,
{nixpkgs_unstable = ...; strategoxt_unstable = ...}). This makes
attribute paths ("nix-env -qaA" and "nix-env -iA") more sensible,
e.g., "nix-env -iA nixpkgs_unstable.subversion".
by priority and version install. That is, if there are multiple
packages with the same name, then pick the package with the highest
priority, and only use the version if there are multiple packages
with the same priority.
This makes it possible to mark specific versions/variant in Nixpkgs
more or less desirable than others. A typical example would be a
beta version of some package (e.g., "gcc-4.2.0rc1") which should not
be installed even though it is the highest version, except when it
is explicitly selected (e.g., "nix-env -i gcc-4.2.0rc1").
* Idem for nix-env -u, only the semantics are a bit trickier since we
also need to take into account the priority of the currently
installed package (we never upgrade to a lower priority, unless
--always is given).
a user environment by an install or upgrade action. This is
particularly useful if you have a version installed that you don't
want to upgrade (e.g., because the newer versions are broken).
Example:
$ nix-env -u zapping --dry-run
(dry run; not doing anything)
upgrading `zapping-0.9.6' to `zapping-0.10cvs6'
$ nix-env --set-flag keep true zapping
$ nix-env -u zapping --dry-run
(dry run; not doing anything)
However, "-e" will still uninstall the package. (Maybe we should
require the keep flag to be explicitly set to false before it can be
uninstalled.)
to show only those derivations whose output is already in the Nix
store or that can be substituted (i.e., downloaded from somewhere).
In other words, it shows the packages that can be installed “quickly”,
i.e., don’t need to be built from source.
evaluator. This was important because the NixOS expressions started
to hit 2 MB default stack size on Linux.
GCC is really dumb about stack space: it just adds up all the local
variables and temporaries of every scope into one huge stack frame.
This is really bad for deeply recursive functions. For instance,
every `throw Error(format("error message"))' causes a format object
of a few hundred bytes to be allocated on the stack. As a result,
every recursive call to evalExpr2() consumed 4680 bytes. By
splitting evalExpr2() and by moving the exception-throwing code out
of the main functions, evalExpr2() now only consumes 40 bytes.
Similar for evalExpr().
which paths specified on the command line are invalid (i.e., don't
barf when encountering an invalid path, just print it). This is
useful for build-remote.pl to figure out which paths need to be
copied to a remote machine. (Currently we use rsync, but that's
rather inefficient.)
--export' into the Nix store, and optionally check the cryptographic
signatures against /nix/etc/nix/signing-key.pub. (TODO: verify
against a set of public keys.)
path. This is like `nix-store --dump', only it also dumps the
meta-information of the store path (references, deriver). Will add
a `--sign' flag later to add a cryptographic signature, which we
will use for exchanging store paths between build farm machines in a
secure manner.
attribute) about installed packages in user environments. Thus, an
operation like `nix-env -q --description' shows useful information
not only on available packages but also on installed packages.
* nix-env now passes the entire manifest as an argument to the Nix
expression of the user environment builder (not just a list of
paths), so that in particular the user environment builder has
access to the meta attributes.
* New operation `--set-flag' in nix-env to change meta info of
installed packages. This will be useful to pass per-package
policies to the user environment builder (e.g., how to resolve
collision or whether to disable a package (NIX-80)) or upgrade
policies in nix-env (e.g., that a package should be "masked", that
is, left untouched by upgrade actions). Example:
$ nix-env --set-flag enabled false ghc-6.4
computing the store path (NIX-77). This is an important security
property in multi-user Nix stores.
Note that this changes the store paths of derivations (since the
derivation aterms are added using addTextToStore), but not most
outputs (unless they use builtins.toFile).
* `sub' to subtract two numbers.
* `stringLength' to get the length of a string.
* `substring' to get a substring of a string. These should be enough
to allow most string operations to be expressed.
programs, so if a builder uses TMPDIR, then it will fail when
executed through nix-setuid-helper. In fact Glibc clears a whole
bunch of variables (see sysdeps/generic/unsecvars.h in the Glibc
sources), but only TMPDIR should matter in practice. As a
workaround, we reinitialise TMPDIR from NIX_BUILD_TOP.
important to get garbage collection to work if there is any
inconsistency in the database (because the referrer table is used to
determine whether it is safe to delete a path).
* `nix-store --verify': show some progress.
* nix-unpack-closure: extract the top-level paths from the closure and
print them on stdout. This allows them to be installed, e.g.,
"nix-env -i $(nix-unpack-closure)". (NIX-64)
<derivation outPath=... drvPath=...> attrs </derivation>. Only emit
the attributes of any specific derivation only. This prevents
exponententially large XML output due to the absense of sharing.
from a source directory. All files for which a predicate function
returns true are copied to the store. Typical example is to leave
out the .svn directory:
stdenv.mkDerivation {
...
src = builtins.filterSource
(path: baseNameOf (toString path) != ".svn")
./source-dir;
# as opposed to
# src = ./source-dir;
}
This is important because the .svn directory influences the hash in
a rather unpredictable and variable way.
single derivation specified by the argument. This is useful when we
want to have a profile for a single derivation, such as a server
configuration. Then we can just say (e.g.)
$ nix-env -p /.../server-profile -f server.nix --set -A server
We can't do queries or upgrades on such a profile, but we can do
rollbacks. The advantage over -i is that we don't have to worry
about other packages having been installed in the profile
previously; --set gets rid of them.
matters when running as root, since then we don't use the setuid
helper (which already used lchown()).
* Also check for an obscure security problem on platforms that don't
have lchown. Then we can't change the ownership of symlinks, which
doesn't matter *except* when the containing directory is writable by
the owner (which is the case with the top-level Nix store directory).
* Throw more exceptions as BuildErrors instead of Errors. This
matters when --keep-going is turned on. (A BuildError is caught
and terminates the goal in question, an Error terminates the
program.)
seconds without producing output on stdout or stderr (NIX-65). This
timeout can be specified using the `--max-silent-time' option or the
`build-max-silent-time' configuration setting. The default is
infinity (0).
* Fix a tricky race condition: if we kill the build user before the
child has done its setuid() to the build user uid, then it won't be
killed, and we'll potentially lock up in pid.wait(). So also send a
conventional kill to the child.
that have to be done as root: running builders under different uids,
changing ownership of build results, and deleting paths in the store
with the wrong ownership).
`nix-store --delete'. But unprivileged users are not allowed to
ignore liveness.
* `nix-store --delete --ignore-liveness': ignore the runtime roots as
well.
process, so forward the operation.
* Spam the user about GC misconfigurations (NIX-71).
* findRoots: skip all roots that are unreadable - the warnings with
which we spam the user should be enough.
processes can register indirect roots. Of course, there is still
the problem that the garbage collector can only read the targets of
the indirect roots when it's running as root...
* SIGIO -> SIGPOLL (POSIX calls it that).
* Use sigaction instead of signal to register the SIGPOLL handler.
Sigaction is better defined, and a handler registered with signal
appears not to interrupt fcntl(..., F_SETLKW, ...), which is bad.
via the Unix domain socket in /nix/var/nix/daemon.socket. The
server forks a worker process per connection.
* readString(): use the heap, not the stack.
* Some protocol fixes.
* Added `build-users-group', the group under which builds are to be
performed.
* Check that /nix/store has 1775 permission and is owner by the
build-users-group.
The problem is that when we kill the client while the worker is
building, and the builder is not writing anything to stderr, then
the worker never notice that the socket is closed on the other side,
so it just continues indefinitely. The solution is to catch SIGIO,
which is sent when the far side of the socket closes, and simulate
an normal interruption. Of course, SIGIO is also sent every time
the client sends data over the socket, so we only enable the signal
handler when we're not expecting any data...
mode. Presumably nix-worker would be setuid to the Nix store user.
The worker performs all operations on the Nix store and database, so
the caller can be completely unprivileged.
This is already much more secure than the old setuid scheme, since
the worker doesn't need to do Nix expression evaluation and so on.
Most importantly, this means that it doesn't need to access any user
files, with all resulting security risks; it only performs pure
store operations.
Once this works, it is easy to move to a daemon model that forks off
a worker for connections established through a Unix domain socket.
That would be even more secure.
* Some refactoring: put the NAR archive integer/string serialisation
code in a separate file so it can be reused by the worker protocol
implementation.
containing functions that operate on the Nix store. One
implementation is LocalStore, which operates on the Nix store
directly. The next step, to enable secure multi-user Nix, is to
create a different implementation RemoteStore that talks to a
privileged daemon process that uses LocalStore to perform the actual
operations.
Rather, setuid support is now always compiled in (at least on
platforms that have the setresuid system call, e.g., Linux and
FreeBSD), but it must enabled by chowning/chmodding the Nix
binaries.
gives a huge speedup in operations that read or write from standard
input/output. (So libstdc++'s I/O isn't that bad, you just have to
call std::ios::sync_with_stdio(false).) For instance, `nix-store
--register-substitutes' went from 1.4 seconds to 0.1 seconds on a
certain input. Another victory for Valgrind.
graph to be passed to a builder. This attribute should be a list of
pairs [name1 path1 name2 path2 ...]. The references graph of each
`pathN' will be stored in a text file `nameN' in the temporary build
directory. The text files have the format used by `nix-store
--register-validity'. However, the deriver fields are left empty.
`exportReferencesGraph' is useful for builders that want to do
something with the closure of a store path. Examples: the builders
that make initrds and ISO images for NixOS.
`exportReferencesGraph' is entirely pure. It's necessary because
otherwise the only way for a builder to get this information would
be to call `nix-store' directly, which is not allowed (though
unfortunately possible).
available. For instance,
$ nix-store -l $(which svn) | less
lets you read the build log of the Subversion instance in your
profile.
* `nix-store -qb': if applied to a non-derivation, take the deriver.
check that the references of the output of a derivation are in the
specified set. For instance,
allowedReferences = [];
specifies that the output cannot have any references. (This is
useful, for instance, for the generation of bootstrap binaries for
stdenv-linux, which must not have any references for purity). It
could also be used to guard against undesired runtime dependencies,
e.g.,
{gcc, dynlib}: derivation {
...
allowedReferences = [dynlib];
}
says that the output can refer to the path of `dynlib' but not
`gcc'. A `forbiddedReferences' attribute would be more useful for
this, though.
concatenation and string coercion. This was a big mess (see
e.g. NIX-67). Contexts are now folded into strings, so that they
don't cause evaluation errors when they're not expected. The
semantics of paths has been clarified (see nixexpr-ast.def).
toString() and coerceToString() have been merged.
Semantic change: paths are now copied to the store when they're in a
concatenation (and in most other situations - that's the
formalisation of the meaning of a path). So
"foo " + ./bla
evaluates to "foo /nix/store/hash...-bla", not "foo
/path/to/current-dir/bla". This prevents accidental impurities, and
is more consistent with the treatment of derivation outputs, e.g.,
`"foo " + bla' where `bla' is a derivation. (Here `bla' would be
replaced by the output path of `bla'.)
side should be a path, I guess.
* Handle paths that are in the store but not direct children of the
store directory.
* Ugh, hack to prevent double context wrapping.
attribute existence and to return an attribute from an attribute
set, respectively. Example: `hasAttr "foo" {foo = 1;}'. They
differ from the `?' and `.' operators in that the attribute name is
an arbitrary expression. (NIX-61)
Nix-env failed to call addPermRoot(), which is necessary to safely
add a new root. So if nix-env started after and finished before the
garbage collector, the user environment (plus all other new stuff)
it built might be garbage collected, leading to a dangling symlink
chain in ~/.nix-profile...
* Be more explicit if we block on the GC lock ("waiting for the big
garbage collector lock...").
* Don't loop trying to create a new generation. It's not necessary
anymore since profiles are locked nowadays.
and returns its path. This can be used to (for instance) write
builders inside a Nix expression, e.g.,
stdenv.mkDerivation {
builder = "
source $stdenv/setup
...
";
...
}
derivation attributes to flatten them into strings. This is
possible since string can nowadays be wrapped in contexts that
describe the derivations/sources referenced by the evaluation of the
string.
all the primops. This allows Nix expressions to test for new
primops and take appropriate action if they're not available. For
instance, rather than calling a primop `foo' directly, they could
say `if builtins ? foo then builtins.foo ... else ...'.
writable. File permissions on Cygwin are rather complex, and in this
case this check introduced a problem with build jobs invoke from
outside of Cygwin (MSYS). It seemed almost impossible to fix the
permissions of the directory, so for now this safety check is disabled
on Cygwin.
https://svn.cs.uu.nl:12443/repos/trace/buildfarm-control/trunk/ext/nix/,
with some modifications. This allows `nix-env -qa' to show the
attribute path that can be used to unambiguously install a package
using `nix-env -i -A'. Example:
$ nix-env -f top-level/all-packages.nix -qaA subversion xorg-server
subversionWithJava subversion-1.2.3
subversion subversion-1.3.2
subversion14 subversion-1.4.0pre-rc1
xorg.xorgserver xorg-server-1.1.0
e.g.,
$ nix-env -i -A subversion xorg.xorgserver
The main advantage over using symbolic names is that using attribute
names is unambiguous and much, much faster.
argument has a valid value, i.e., is in a certain domain. E.g.,
{ foo : [true false]
, bar : ["a" "b" "c"]
}: ...
This previously could be done using assertions, but domain checks
will allow the buildfarm to automatically extract the configuration
space from functions.
"--with-freetype2-library=" + freetype + "/lib"
can now be written as
"--with-freetype2-library=${freetype}/lib"
An arbitrary expression can be enclosed within ${...}, not just
identifiers.
* Escaping in string literals: \n, \r, \t interpreted as in C, any
other character following \ is interpreted as-is.
* Newlines are now allowed in string literals.
packages (provided that they have a `meta.description' attribute).
E.g.,
$ ./src/nix-env/nix-env -qa --description gcc
gcc-4.0.2 GNU Compiler Collection, 4.0.x (cross-compiler for sparc-linux)
gcc-4.0.2 GNU Compiler Collection, 4.0.x (cross-compiler for mips-linux)
gcc-4.0.2 GNU Compiler Collection, 4.0.x (cross-compiler for arm-linux)
gcc-4.0.2 GNU Compiler Collection, 4.0.x
to be queried, e.g., `nix-env -qa firefox'. This does require the
argument '*' to be passed if one wants information about all
derivations, so the old `nix-env -qa' now is `nix-env -qa "*"'.
instantiation, e.g. "nix-env -i" and "nix-env -qas" (but not
"nix-env -qa"). It turns out that many redundant calls to
addToStore(path) were made, which reads and hashes the entire path.
For instance, the bash bootstrap binary in Nixpkgs would be read and
hashed many times. As a result nix-env would spend around 92% of
its time in the function sha256_block (according to callgrind).
Some simple memoization fixes this.
expressions that cause an assertion failure (like `assert system ==
"i686-linux"'). This allows all-packages.nix in Nixpkgs to be used
on all platforms, even if some Nix expressions don't work on all
platforms.
Not sure if this is a good idea; it's a bit hacky. In particular,
due to laziness some derivations might appear in `nix-env -qa' but
disappear in `nix-env -qas' or `nix-env -i'.
Commit 5000!
with the same name *and* version number, and pick the first one
(this means that the order in which channels appear in
~/.nix-channels matters). E.g.:
$ nix-env ii aterm
warning: there are multiple derivations named `aterm-2.4.2'; using the first one
installing `aterm-2.4.2'
the disk is full (because to delete something from the Nix store, we
need a Berkeley DB transaction, which takes up disk space). Under
normal operation, we make sure that there exists a file
/nix/var/nix/db/reserved of 1 MB. When running the garbage
collector, we delete that file before we open the Berkeley DB
environment.
implementations of MD5, SHA-1 and SHA-256. The main benefit is that
we get assembler-optimised implementations of MD5 and SHA-1 (though
not SHA-256 (at least on x86), unfortunately). OpenSSL's SHA-1
implementation on Intel is twice as fast as ours.
derivation(s) we're interested, e.g.,
$ nix-instantiate ./all-packages.nix --attr xlibs.libX11
List elements can also be selected:
$ nix-instantiate ./build-for-release.nix --attr 0.subversion
This allows a non-ambiguous specification of a derivation. Of
course, this should also be added to nix-env and nix-build.
creates a new process group but also a new session. New sessions
have no controlling tty, so child processes like ssh cannot open
/dev/tty (which is bad).
intended). This ensures that any ssh child processes to remote
machines are also killed, and thus the Nix process on the remote
machine also exits. Without this, the remote Nix process will
continue until it exists or until its stdout buffer gets full and it
locks up. (Partially fixes NIX-35.)
deletes a path even if it is reachable from a root. However, it
won't delete a path that still has referrers (since that would
violate store invariants).
Don't try this at home. It's a useful hack for recovering from
certain situations in a somewhat clean way (e.g., holes in closures
due to disk corruption).
nix-store query options `--referer' and `--referer-closure' have
been changed to `--referrer' and `--referrer-closure' (but the old
ones are still accepted for compatibility).
mapping. The referer table is replaced by a referrer table (note
spelling fix) that stores each referrer separately. That is,
instead of having
referer[P] = {Q_1, Q_2, Q_3, ...}
we store
referer[(P, Q_1)] = ""
referer[(P, Q_2)] = ""
referer[(P, Q_3)] = ""
...
To find the referrers of P, we enumerate over the keys with a value
lexicographically greater than P. This requires the referrer table
to be stored as a B-Tree rather than a hash table.
(The tuples (P, Q) are stored as P + null-byte + Q.)
Old Nix databases are upgraded automatically to the new schema.
Nix is properly shut down when it receives those signals. In
particular this ensures that killing the garbage collector doesn't
cause a subsequent database recovery.
builder. Instead, require that the Nix store has sticky permission
(S_ISVTX); everyone can created files in the Nix store, but they
cannot delete, rename or modify files created by others.
root (or setuid root), then builds will be performed under one of
the users listed in the `build-users' configuration variables. This
is to make it impossible to influence build results externally,
allowing locally built derivations to be shared safely between
users (see ASE-2005 paper).
To do: only one builder should be active per build user.
versions to available versions, or vice versa.
For example, the following compares installed versions to available
versions:
$ nix-env -qc
autoconf-2.59 = 2.59
automake-1.9.4 < 1.9.6
f-spot-0.0.10 - ?
firefox-1.0.4 < 1.0.7
...
I.e., there are newer versions available (in the current default Nix
expression) for Automake and Firefox, but not for Autoconf, and
F-Spot is missing altogether.
Conversely, the available versions can be compared to the installed
versions:
$ nix-env -qac
autoconf-2.59 = 2.59
automake-1.9.6 > 1.9.4
bash-3.0 - ?
firefox-1.0.7 > 1.0.4
...
Note that bash is available but no version of it is installed.
If multiple versions are available for comparison, then the highest
is used. E.g., if Subversion 1.2.0 is installed, and Subversion
1.1.4 and 1.2.3 are available, then `nix-env -qc' will print `<
1.2.3', not `> 1.1.4'.
If higher versions are available, the version column is printed in
red (using ANSI escape codes).
dependencyClosure { ... searchPath = [ ../foo ../bar ]; ... }
* Primop `dirOf' to return the directory part of a path (e.g., dirOf
/a/b/c == /a/b).
* Primop `relativise' (according to Webster that's a real word!) that
given paths A and B returns a string representing path B relative
path to A; e.g., relativise /a/b/c a/b/x/y => "../x/y".
determination (e.g., finding the header files dependencies of a C
file) in Nix low-level builds automatically.
For instance, in the function `compileC' in make/lib/default.nix, we
find the header file dependencies of C file `main' as follows:
localIncludes =
dependencyClosure {
scanner = file:
import (findIncludes {
inherit file;
});
startSet = [main];
};
The function works by "growing" the set of dependencies, starting
with the set `startSet', and calling the function `scanner' for each
file to get its dependencies (which should yield a list of strings
representing relative paths). For instance, when `scanner' is
called on a file `foo.c' that includes the line
#include "../bar/fnord.h"
then `scanner' should yield ["../bar/fnord.h"]. This list of
dependencies is absolutised relative to the including file and added
to the set of dependencies. The process continues until no more
dependencies are found (hence its a closure).
`dependencyClosure' yields a list that contains in alternation a
dependency, and its relative path to the directory of the start
file, e.g.,
[ /bla/bla/foo.c
"foo.c"
/bla/bar/fnord.h
"../bar/fnord.h"
]
These relative paths are necessary for the builder that compiles
foo.c to reconstruct the relative directory structure expected by
foo.c.
The advantage of `dependencyClosure' over the old approach (using
the impure `__currentTime') is that it's completely pure, and more
efficient because it only rescans for dependencies (i.e., by
building the derivations yielded by `scanner') if sources have
actually changed. The old approach rescanned every time.
(closed(closed(closed(...)))) since this reduces performance by
producing bigger terms and killing caching (which incidentally also
prevents useful infinite recursion detection).
with default values automatically. I.e., e -> e {}.
This feature makes convenience expressions such as
pkgs/system/i686-linux.nix in Nixpkgs obsolete, since we can just do
$ nix-instantiate ./pkgs/system/all-packages.nix
since all-packages.nix takes a single argument (system) that has a
default value (__thisSystem).
`removeAttrs attrs ["x", "y"]' returns the set `attrs' with the
attributes named `x' and `y' removed. It is not an error for the
named attributes to be missing from the input set.