Commit graph

799 commits

Author SHA1 Message Date
edef c65a6fa86a passAsFile: leave out the hash prefix
Having a colon in the path may cause issues, and having the hash
function indicated isn't actually necessary. We now verify the path 
format in the tests to prevent regressions.
2020-01-02 23:56:06 +00:00
Puck Meerburg 515c0a263e passAsFile: hash the attribute name instead of numbering sequentially
This makes the paths consistent without relying on ordering.

Co-authored-by: edef <edef@edef.eu>
2020-01-02 22:56:03 +00:00
Graham Christensen c502831a1d
exportReferencesGraph: support working
Before, we would get:

    [deploy@bastion:~]$ nix-store -r /nix/store/grfnl76cahwls0igd2by2pqv0dimi8h2-nixos-system-eris-19.09.20191213.03f3def.drv
    these derivations will be built:
      /nix/store/3ka4ihvwh6wsyhpd2qa9f59506mnxvx1-initrd-linux-4.19.88.drv
      /nix/store/ssxwmll7v21did1c8j027q0m8w6pg41i-unit-prometheus-alertmanager-irc-notifier.service.drv
      /nix/store/mvyvkj46ay7pp7b1znqbkck2mq98k0qd-unit-script-network-local-commands-start.drv
      /nix/store/vsl1y9mz38qfk6pyirjwnfzfggz5akg6-unit-network-local-commands.service.drv
      /nix/store/wi5ighfwwb83fdmav6z6n2fw6npm9ffl-unit-prometheus-hydra-exporter.service.drv
      /nix/store/x0qkv535n75pbl3xn6nn1w7qkrg9wwyg-unit-prometheus-packet-sd.service.drv
      /nix/store/lv491znsjxdf51xnfxh9ld7r1zg14d52-unit-script-packet-sd-env-key-pre-start.drv
      /nix/store/nw4nzlca49agsajvpibx7zg5b873gk9f-unit-script-packet-sd-env-key-start.drv
      /nix/store/x674wwabdwjrkhnykair4c8mpxa9532w-unit-packet-sd-env-key.service.drv
      /nix/store/ywivz64ilb1ywlv652pkixw3vxzfvgv8-unit-wireguard-wg0.service.drv
      /nix/store/v3b648293g3zl8pnn0m1345nvmyd8dwb-unit-script-acme-selfsigned-status.nixos.org-start.drv
      /nix/store/zci5d3zvr6fgdicz6k7jjka6lmx0v3g4-unit-acme-selfsigned-status.nixos.org.service.drv
      /nix/store/f6pwvnm63d0kw5df0v7sipd1rkhqxk5g-system-units.drv
      /nix/store/iax8071knxk9c7krpm9jqg0lcrawf4lc-etc.drv
      /nix/store/grfnl76cahwls0igd2by2pqv0dimi8h2-nixos-system-eris-19.09.20191213.03f3def.drv
    error: invalid file name 'closure-init-0' in 'exportReferencesGraph'

This was tough to debug, I didn't figure out which one was broken until I did:

    nix-store -r /nix/store/grfnl76cahwls0igd2by2pqv0dimi8h2-nixos-system-eris-19.09.20191213.03f3def.drv 2>&1 | grep  nix/store | xargs -n1 nix-store -r

and then looking at the remaining build graph:

    $ nix-store -r /nix/store/grfnl76cahwls0igd2by2pqv0dimi8h2-nixos-system-eris-19.09.20191213.03f3def.drv
    these derivations will be built:
      /nix/store/3ka4ihvwh6wsyhpd2qa9f59506mnxvx1-initrd-linux-4.19.88.drv
      /nix/store/grfnl76cahwls0igd2by2pqv0dimi8h2-nixos-system-eris-19.09.20191213.03f3def.drv
    error: invalid file name 'closure-init-0' in 'exportReferencesGraph'

and knowing the initrd build is before the system, then:

    $ nix show-derivation /nix/store/3ka4ihvwh6wsyhpd2qa9f59506mnxvx1-initrd-linux-4.19.88.drv
    {
      "/nix/store/3ka4ihvwh6wsyhpd2qa9f59506mnxvx1-initrd-linux-4.19.88.drv": {
        [...]
        "exportReferencesGraph": "closure-init-0 /nix/store/...-stage-1-init.sh closure-mdadm.conf-1 /nix/store/...-mdadm.conf closure-ubuntu.conf-2 ...",
        [...]
      }
    }

I then searched the repo for "in 'exportReferencesGraph'", found this
recently updated regex, and realized it was missing a "-".
2020-01-01 20:50:40 -05:00
Eelco Dolstra bbe97dff8b Make the Store API more type-safe
Most functions now take a StorePath argument rather than a Path (which
is just an alias for std::string). The StorePath constructor ensures
that the path is syntactically correct (i.e. it looks like
<store-dir>/<base32-hash>-<name>). Similarly, functions like
buildPaths() now take a StorePathWithOutputs, rather than abusing Path
by adding a '!<outputs>' suffix.

Note that the StorePath type is implemented in Rust. This involves
some hackery to allow Rust values to be used directly in C++, via a
helper type whose destructor calls the Rust type's drop()
function. The main issue is the dynamic nature of C++ move semantics:
after we have moved a Rust value, we should not call the drop function
on the original value. So when we move a value, we set the original
value to bitwise zero, and the destructor only calls drop() if the
value is not bitwise zero. This should be sufficient for most types.

Also lots of minor cleanups to the C++ API to make it more modern
(e.g. using std::optional and std::string_view in some places).
2019-12-10 22:06:05 +01:00
Eelco Dolstra 61cc9f34d2 Remove UserLock self-lock check
This is no longer needed since we're not using POSIX locks anymore.
2019-12-09 23:57:33 +01:00
Eelco Dolstra 47a937d512 Show hash mismatch warnings in SRI format
(cherry picked from commit 63c5c91cc0)
2019-12-05 20:32:25 +01:00
Eelco Dolstra ac2bc721d8 Merge remote-tracking branch 'origin/recursive-nix' 2019-12-02 12:34:46 +01:00
Eelco Dolstra 045708db43 Make <nix/unpack-channel.nix> a builtin builder
This was the last function using a shell script, so this allows us to
get rid of tar, coreutils, bash etc.
2019-11-26 22:07:28 +01:00
Eelco Dolstra 7c8d7c17f8
Merge pull request #3144 from matthewbauer/fix-sandbox-fallback
Fix sandbox fallback settings
2019-11-26 20:51:52 +01:00
Eelco Dolstra ba87b08f85
getEnv(): Return std::optional
This allows distinguishing between an empty value and no value.
2019-11-22 16:18:13 +01:00
Eelco Dolstra 5ee23c35b9
Merge pull request #3219 from Ericson2314/semicolons
Fix extra semicolons warnings
2019-11-11 12:13:51 +01:00
John Ericson 96e6e680c1 Fix extra ; warnings involving MakeError 2019-11-10 11:24:47 -05:00
Eelco Dolstra 39a2e166dd
Cleanup 2019-11-06 16:53:02 +01:00
Eelco Dolstra 69326f3637
Recursive Nix: Handle concurrent client connections 2019-11-06 00:55:03 +01:00
Eelco Dolstra c119ab9db0
Enable recursive Nix using a feature
Derivations that want to use recursion should now set

  requiredSystemFeatures = [ "recursive-nix" ];

to make the daemon socket appear.

Also, Nix should be configured with "experimental-features =
recursive-nix".
2019-11-06 00:55:03 +01:00
Eelco Dolstra c921074c19
RestrictedStore: Implement addToStore() 2019-11-06 00:55:03 +01:00
Eelco Dolstra c4d7c76b64
Recursive Nix support
This allows Nix builders to call Nix to build derivations, with some
limitations.

Example:

  let nixpkgs = fetchTarball channel:nixos-18.03; in

  with import <nixpkgs> {};

  runCommand "foo"
    {
      buildInputs = [ nix jq ];
      NIX_PATH = "nixpkgs=${nixpkgs}";
    }
    ''
      hello=$(nix-build -E '(import <nixpkgs> {}).hello.overrideDerivation (args: { name = "hello-3.5"; })')

      $hello/bin/hello

      mkdir -p $out/bin
      ln -s $hello/bin/hello $out/bin/hello

      nix path-info -r --json $hello | jq .
    ''

This derivation makes a recursive Nix call to build GNU Hello and
symlinks it from its $out, i.e.

  # ll ./result/bin/
  lrwxrwxrwx 1 root root 63 Jan  1  1970 hello -> /nix/store/s0awxrs71gickhaqdwxl506hzccb30y5-hello-3.5/bin/hello

  # nix-store -qR ./result
  /nix/store/hwwqshlmazzjzj7yhrkyjydxamvvkfd3-glibc-2.26-131
  /nix/store/s0awxrs71gickhaqdwxl506hzccb30y5-hello-3.5
  /nix/store/sgmvvyw8vhfqdqb619bxkcpfn9lvd8ss-foo

This is implemented as follows:

* Before running the outer builder, Nix creates a Unix domain socket
  '.nix-socket' in the builder's temporary directory and sets
  $NIX_REMOTE to point to it. It starts a thread to process
  connections to this socket. (Thus you don't need to have nix-daemon
  running.)

* The daemon thread uses a wrapper store (RestrictedStore) to keep
  track of paths added through recursive Nix calls, to implement some
  restrictions (see below), and to do some censorship (e.g. for
  purity, queryPathInfo() won't return impure information such as
  signatures and timestamps).

* After the build finishes, the output paths are scanned for
  references to the paths added through recursive Nix calls (in
  addition to the inputs closure). Thus, in the example above, $out
  has a reference to $hello.

The main restriction on recursive Nix calls is that they cannot do
arbitrary substitutions. For example, doing

  nix-store -r /nix/store/kmwd1hq55akdb9sc7l3finr175dajlby-hello-2.10

is forbidden unless /nix/store/kmwd... is in the inputs closure or
previously built by a recursive Nix call. This is to prevent
irreproducible derivations that have hidden dependencies on
substituters or the current store contents. Building a derivation is
fine, however, and Nix will use substitutes if available. In other
words, the builder has to present proof that it knows how to build a
desired store path from scratch by constructing a derivation graph for
that path.

Probably we should also disallow instantiating/building fixed-output
derivations (specifically, those that access the network, but
currently we have no way to mark fixed-output derivations that don't
access the network). Otherwise sandboxed derivations can bypass
sandbox restrictions and access the network.

When sandboxing is enabled, we make paths appear in the sandbox of the
builder by entering the mount namespace of the builder and
bind-mounting each path. This is tricky because we do a pivot_root()
in the builder to change the root directory of its mount namespace,
and thus the host /nix/store is not visible in the mount namespace of
the builder. To get around this, just before doing pivot_root(), we
branch a second mount namespace that shares its /nix/store mountpoint
with the parent.

Recursive Nix currently doesn't work on macOS in sandboxed mode
(because we can't change the sandbox policy of a running build) and in
non-root mode (because setns() barfs).
2019-11-06 00:52:38 +01:00
Benjamin Hipple 80d5ec6ff4 Minor updates to inline comments
Add missing docstring on InstallableCommand. Also, some of these were wrapped
when they're right next to a line longer than the unwrapped line, so we can just
unwrap them to save vertical space.
2019-10-31 05:56:37 -04:00
Eelco Dolstra 95c727caef
Remove the check against concurrent builds in the same process 2019-10-29 12:43:20 +01:00
Eelco Dolstra f7ce80f90a
Factor out linkOrCopy() 2019-10-27 18:19:13 +01:00
Eelco Dolstra 0abb3ad537 Allow content-addressable paths to have references
This adds a command 'nix make-content-addressable' that rewrites the
specified store paths into content-addressable paths. The advantage of
such paths is that 1) they can be imported without signatures; 2) they
can enable deduplication in cases where derivation changes do not
cause output changes (apart from store path hashes).

For example,

  $ nix make-content-addressable -r nixpkgs.cowsay
  rewrote '/nix/store/g1g31ah55xdia1jdqabv1imf6mcw0nb1-glibc-2.25-49' to '/nix/store/48jfj7bg78a8n4f2nhg269rgw1936vj4-glibc-2.25-49'
  ...
  rewrote '/nix/store/qbi6rzpk0bxjw8lw6azn2mc7ynnn455q-cowsay-3.03+dfsg1-16' to '/nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16'

We can then copy the resulting closure to another store without
signatures:

  $ nix copy --trusted-public-keys '' ---to ~/my-nix /nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16

In order to support self-references in content-addressable paths,
these paths are hashed "modulo" self-references, meaning that
self-references are zeroed out during hashing. Somewhat annoyingly,
this means that the NAR hash stored in the Nix database is no longer
necessarily equal to the output of "nix hash-path"; for
content-addressable paths, you need to pass the --modulo flag:

  $ nix path-info --json /nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16  | jq -r .[].narHash
  sha256:0ri611gdilz2c9rsibqhsipbfs9vwcqvs811a52i2bnkhv7w9mgw

  $ nix hash-path --type sha256 --base32 /nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16
  1ggznh07khq0hz6id09pqws3a8q9pn03ya3c03nwck1kwq8rclzs

  $ nix hash-path --type sha256 --base32 /nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16 --modulo iq6g2x4q62xp7y7493bibx0qn5w7xz67
  0ri611gdilz2c9rsibqhsipbfs9vwcqvs811a52i2bnkhv7w9mgw
2019-10-21 17:47:24 +02:00
Matthew Bauer 96c84937c4 Move tmpDirInSandbox to initTmpDir 2019-10-13 16:41:49 -04:00
Matthew Bauer 499b038875 Fix sandbox fallback settings
The tmpDirInSandbox is different when in sandboxed vs. non-sandboxed.
Since we don’t know ahead of time here whether sandboxing is enabled,
we need to reset all of the env vars we’ve set previously. This fixes
the issue encountered in https://github.com/NixOS/nixpkgs/issues/70856.
2019-10-12 19:22:13 -04:00
Eelco Dolstra 99b73fb507
OCD performance fix: {find,count}+insert => insert 2019-10-09 16:06:29 +02:00
Benjamin Hipple c6a542f22a Fix spelling in comment 2019-09-21 18:53:15 -04:00
Eelco Dolstra e07ec8d27e
Support allowSubstitutes attribute in structured attribute derivations
Hopefully fixes #3081 (didn't test).
2019-09-03 16:03:49 +02:00
Eelco Dolstra e5b397b2c7 Merge branch 'test-sandboxing' of https://github.com/matthewbauer/nix 2019-08-27 20:58:47 +02:00
Matthew Bauer 5c06a8d328 Reset tmpDirInSandbox for unsandboxed 2019-08-23 20:24:39 -04:00
Eelco Dolstra 56df30cd3f
Merge pull request #2995 from tweag/post-build-hook
Add a post build hook
2019-08-07 15:02:29 +02:00
Eelco Dolstra e349f2c0a3
Use BSD instead of POSIX file locks
POSIX file locks are essentially incompatible with multithreading. BSD
locks have much saner semantics. We need this now that there can be
multiple concurrent LocalStore::buildPaths() invocations.
2019-08-02 18:39:16 +02:00
regnat 7c5596734f
Add a post-build-hook
Passing `--post-build-hook /foo/bar` to a nix-* command will cause
`/foo/bar` to be executed after each build with the following
environment variables set:

    DRV_PATH=/nix/store/drv-that-has-been-built.drv
    OUT_PATHS=/nix/store/...build /nix/store/...build-bin /nix/store/...build-dev

This can be useful in particular to upload all the builded artifacts to
the cache (including the ones that don't appear in the runtime closure
of the final derivation or are built because of IFD).

This new feature prints the stderr/stdout output to the `nix-build`
and `nix build` client, and the output is printed in a Nix 2
compatible format:

    [nix]$ ./inst/bin/nix-build ./test.nix
    these derivations will be built:
      /nix/store/ishzj9ni17xq4hgrjvlyjkfvm00b0ch9-my-example-derivation.drv
    building '/nix/store/ishzj9ni17xq4hgrjvlyjkfvm00b0ch9-my-example-derivation.drv'...
    hello!
    bye!
    running post-build-hook '/home/grahamc/projects/github.com/NixOS/nix/post-hook.sh'...
    post-build-hook: + sleep 1
    post-build-hook: + echo 'Signing paths' /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
    post-build-hook: Signing paths /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
    post-build-hook: + sleep 1
    post-build-hook: + echo 'Uploading paths' /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
    post-build-hook: Uploading paths /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
    post-build-hook: + sleep 1
    post-build-hook: + printf 'very important stuff'
    /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation

    [nix-shell:~/projects/github.com/NixOS/nix]$ ./inst/bin/nix build -L -f ./test.nix
    my-example-derivation> hello!
    my-example-derivation> bye!
    my-example-derivation (post)> + sleep 1
    my-example-derivation (post)> + echo 'Signing paths' /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
    my-example-derivation (post)> Signing paths /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
    my-example-derivation (post)> + sleep 1
    my-example-derivation (post)> + echo 'Uploading paths' /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
    my-example-derivation (post)> Uploading paths /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
    my-example-derivation (post)> + sleep 1
    my-example-derivation (post)> + printf 'very important stuff'
    [1 built, 0.0 MiB DL]

Co-authored-by: Graham Christensen <graham@grahamc.com>
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
2019-08-02 10:48:15 -04:00
Matthew Bauer 9a0855bbb6 Don’t rely on EPERM
startProcess does not appear to send the exit code to the helper
correctly. Not sure why this is, but it is probably safe to just
fallback on all sandbox errors.
2019-07-30 17:53:37 -04:00
Matthew Bauer 11d8534629 Use sandbox fallback when cloning fails in builder
When sandbox-fallback = true (the default), the Nix builder will fall
back to disabled sandbox mode when the kernel doesn’t allow users to
set it up. This prevents hard errors from occuring in tricky places,
especially the initial installer. To restore the previous behavior,
users can set:

  sandbox-fallback = false

in their /etc/nix/nix.conf configuration.
2019-07-25 14:42:30 -04:00
Matthew Bauer d171090530 Disable CLONE_NEWUSER when it’s unavailable
Some kernels disable "unpriveleged user namespaces". This is
unfortunate, but we can still use mount namespaces. Anyway, since each
builder has its own nixbld user, we already have most of the benefits
of user namespaces.
2019-07-25 14:42:25 -04:00
Eelco Dolstra 2f853b20df
Merge pull request #2975 from matthewbauer/fix-nsswitch-issue
Don’t use entire /etc/nsswitch.conf file
2019-07-13 17:08:02 +02:00
Daiderd Jordan a52c331edb
build: replace 100 offset for build exit codes 2019-07-02 00:12:38 +02:00
Daiderd Jordan cbf84bcce7
build: use binary mask for build status flags
If multiple builds with fail with different errors it will be reflected
in the status code.

eg.

	103 => timeout + hash mismatch
	105 => timeout + check mismatch
	106 => hash mismatch + check mismatch
	107 => timeout + hash mismatch + check mismatch
2019-07-02 00:12:38 +02:00
Daiderd Jordan 97baf32fbc
build: add exit code for hash and check mismatches
Makes it easier to identify the failure reason in other tooling, eg.
differentiate between a non-deterministic --check vs a failed build.

	$ nix-build '<nix/fetchurl.nix>' --argstr url http://example.org --argstr sha256 0000000000000000000000000000000000000000000000000000
	hash mismatch in fixed-output derivation '/nix/store/nzi9ck45rwlxzcwr25is7qlf3hs5xl83-example.org':
	  wanted: sha256:0000000000000000000000000000000000000000000000000000
	  got:    sha256:08y4734bm2zahw75b16bcmcg587vvyvh0n11gwiyir70divwp1rm
	$ echo $?
	102

	$ nix-build -E 'with import <nixpkgs> {}; runCommand "foo" {} "date +%s > $out"' --check
	warning: rewriting hashes in '/nix/store/g3k47g0399fvjmbm0p0mnad74k4w8vkz-foo'; cross fingers
	error: derivation '/nix/store/mggc8dz13ackb49qca6m23zq4fpq132q-foo.drv' may not be deterministic: output '/nix/store/g3k47g0399fvjmbm0p0mnad74k4w8vkz-foo' differs
	$ echo $?
	104
2019-07-02 00:12:34 +02:00
Matthew Bauer ec0087df0a Don’t use entire /etc/nsswitch.conf file
The default nsswitch.conf(5) file in most distros can handle many
different things including host name, user names, groups, etc. In Nix,
we want to limit the amount of impurities that come from these things.
As a result, we should only allow nss to be used for gethostbyname(3)
and getservent(3).

/cc @Ericson2314
2019-06-27 14:31:29 -04:00
Eelco Dolstra 3cc1125595
Another attempt at getting pseudoterminals to work on macOS 2019-06-17 08:08:04 +02:00
Eelco Dolstra 2743bf0bb1 Hopefully fix macOS tests 2019-06-16 20:02:40 +02:00
Eelco Dolstra 82ca6ef390 Set $TERM 2019-06-16 17:36:30 +02:00
Eelco Dolstra e84c265645 Run builds in a pseudo-terminal
This allows many programs (e.g. gcc, clang, cmake) to print colorized
log output (assuming $TERM is set to a value like "xterm").

There are other ways to get colors, in particular setting
CLICOLOR_FORCE, but they're less widely supported and can break
programs that parse tool output.
2019-06-16 17:36:30 +02:00
Eelco Dolstra 5f6840fbb4
Merge pull request #2802 from LnL7/fix-needs-hashrewrite
build: move needsHashRewrite initialization to startBuilder
2019-05-13 08:53:48 +02:00
Daiderd Jordan ce02fc74b2
build: make needsHashRewrite a method 2019-05-12 22:56:27 +02:00
Graham Christensen 73b797c207
handleDiffHook: stop passing allowVfork 2019-05-12 13:44:22 -04:00
Graham Christensen b4a05edbfe
runProgram: support gid, uid, chdir 2019-05-12 13:17:27 -04:00
Graham Christensen dde8eeb39a
chdir, setgroups 2019-05-12 13:17:26 -04:00
Graham Christensen 6df61db060
diff hook: execute as the build user, and pass the temp dir 2019-05-12 13:17:26 -04:00
Graham Christensen c78686e411
build: run diff-hook under --check and document diff-hook 2019-05-12 13:17:24 -04:00
Daiderd Jordan ff6867ab94
build: move needsHashRewrite initialization to startBuilder
The value of useChroot is not set yet in the constructor, resulting in
hash rewriting being enabled in certain cases where it should not be.

Fixes #2801
2019-05-12 15:53:40 +02:00
Eelco Dolstra f9a2ea4486
Fix "Bad system call" running i686-linux binaries on x86_64-linux
To determine which seccomp filters to install, we were incorrectly
using settings.thisSystem, which doesn't denote the actual system when
--system is used.

Fixes #2791.
2019-05-03 10:48:33 +02:00
Daiderd Jordan b614e0e53d
build: only skip hash rewriting for sandboxing on linux
The sandbox on darwin, and possibly other future platforms, doesn't have
enough isolation to redirect outputs without hash rewriting.
2019-04-17 23:41:23 +02:00
Eelco Dolstra 41ba5135e0 primeCache(): Barf if builds are needed but not allowed
Fixes #2753.
2019-04-01 21:09:49 +02:00
Eelco Dolstra ef52ccf035
experimental/optional -> optional 2019-03-14 14:10:52 +01:00
Eelco Dolstra 01d07b1e92
Revert "Restore parent mount namespace before executing a child process"
This reverts commit a0ef21262f. This
doesn't work in 'nix run' and nix-shell because setns() fails in
multithreaded programs, and Boehm GC mark threads are uncancellable.

Fixes #2646.
2019-02-05 10:49:19 +01:00
Jonas Chevalier 5e6fa9092f
libstore: improve hash mismatch error messages
Use the same output ordering and format everywhere.

This is such a common issue that we trade the single-line error message for
more readability.

Old message:
```
fixed-output derivation produced path '/nix/store/d4nw9x2sy9q3r32f3g5l5h1k833c01vq-example.com' with sha256 hash '08y4734bm2zahw75b16bcmcg587vvyvh0n11gwiyir70divwp1rm' instead of the expected hash '1xzwnipjd54wl8g93vpw6hxnpmdabq0wqywriiwmh7x8k0lvpq5m'
```

New message:
```
hash mismatch in fixed-output derivation '/nix/store/d4nw9x2sy9q3r32f3g5l5h1k833c01vq-example.com':
  wanted: sha256:1xzwnipjd54wl8g93vpw6hxnpmdabq0wqywriiwmh7x8k0lvpq5m
  got:    sha256:08y4734bm2zahw75b16bcmcg587vvyvh0n11gwiyir70divwp1rm

```
2018-12-12 17:42:00 +01:00
Eelco Dolstra a32ff2573b
Fix 'Read-only file system' when building a derivation 2018-11-15 13:20:39 +01:00
Eelco Dolstra 18b4c53f71
Restore old (dis)allowedRequisites behaviour for self-references
stdenv relies on this. So ignore self-references (but only in legacy non-structured attributes mode).
2018-10-27 15:41:53 +02:00
Eelco Dolstra 3cd15c5b1f
Per-output reference and closure size checks
In structured-attributes derivations, you can now specify per-output
checks such as:

  outputChecks."out" = {
    # The closure of 'out' must not be larger than 256 MiB.
    maxClosureSize = 256 * 1024 * 1024;

    # It must not refer to C compiler or to the 'dev' output.
    disallowedRequisites = [ stdenv.cc "dev" ];
  };

  outputChecks."dev" = {
    # The 'dev' output must not be larger than 128 KiB.
    maxSize = 128 * 1024;
  };

Also fixed a bug in allowedRequisites that caused it to ignore
self-references.
2018-10-23 01:29:16 +02:00
Eelco Dolstra 1e7b8deea7
Check requiredSystemFeatures for local builds
For example, this prevents a "kvm" build on machines that don't have
KVM.

Fixes #2012.
2018-09-28 16:10:27 +02:00
Eelco Dolstra 7ae7a38c9a
Move structured attrs handling into a separate class
This is primarily because Derivation::{can,will}BuildLocally() depends
on attributes like preferLocalBuild and requiredSystemFeatures, but it
can't handle them properly because it doesn't have access to the
structured attributes.
2018-09-28 14:32:46 +02:00
Eelco Dolstra 99d4bb2d4c
Remove obsolete check on system features 2018-09-28 13:28:15 +02:00
Eelco Dolstra c9ba33870e
Support special attributes in structured attributes derivations
E.g. __noChroot and allowedReferences now work correctly. We also now
check that the attribute type is correct. For instance, instead of

  allowedReferences = "out";

you have to write

  allowedReferences = [ "out" ];

Fixes #2453.
2018-09-28 12:43:01 +02:00
Eelco Dolstra bba3f0a308
If fallback is enabled, temporarily disable substituters after a failure
Otherwise, we just keep asking the substituter for other .narinfo
files, which can take a very long time due to retries/timeouts.
2018-09-07 17:08:43 +02:00
Eelco Dolstra 33c3f91885
Handle queryPathInfo() failure from substituters when fallback is enabled
Fixes #1990.
2018-09-07 16:35:48 +02:00
Eelco Dolstra c0c31b58a4
Add localhost alias for ::1 to the sandbox 2018-08-31 11:12:51 +02:00
Yorick 72a78beb34
Fix #2162: use getaddrinfo instead of curl to preload NSS 2018-06-12 13:05:14 +02:00
Eelco Dolstra 4ac4f675df
Don't require --fallback to recover from disappeared binary cache NARs 2018-06-05 16:04:41 +02:00
Eelco Dolstra 737ed88f35
Modularize config settings
Allow global config settings to be defined in multiple Config
classes. For example, this means that libutil can have settings and
evaluator settings can be moved out of libstore. The Config classes
are registered in a new GlobalConfig class to which config files
etc. are applied.

Relevant to https://github.com/NixOS/nix/issues/2009 in that it
removes the need for ad hoc handling of useCaseHack, which was the
underlying cause of that issue.
2018-05-30 13:28:01 +02:00
Eelco Dolstra c717d8e3bd
Don't set a CA assertion for paths with references
Really fixes #2133.
2018-05-03 14:49:56 +02:00
Eelco Dolstra 53ec5ac69f
Fix some random -Wconversion warnings 2018-05-02 13:56:34 +02:00
Shea Levy 8e6108ff71
Merge branch 'aarch64-armv7' of git://github.com/lheckemann/nix
Support extra compatible architectures (#1916)
2018-04-23 08:48:22 -04:00
Will Dietz 6d9129014d build.cc: fix bind-mount of /dev/{pts,ptmx} fallback
Don't bind-mount these to themselves,
mount them into the chroot directory.

Fixes pty issues when using sandbox on CentOS 7.4.
(build of perlPackages.IOTty fails before this change)
2018-04-20 12:24:23 -05:00
Eelco Dolstra c74f838620
exportReferences: Check whether the path is in the input closure
Fixes #2082.
2018-04-17 12:03:27 +02:00
Eelco Dolstra d34fa2bcc3
Fix #1921 2018-04-13 15:42:35 +02:00
Eelco Dolstra f87e286e82
Merge branch 'fix/avoid-large-stack-buffers' of https://github.com/dtzWill/nix 2018-03-22 13:19:25 +01:00
Eelco Dolstra 668ac3ea2c
Make <nix/buildenv.nix> a builtin builder
This avoids sandbox annoyances.
2018-03-20 17:28:09 +01:00
Eelco Dolstra 1aca195e52
Hack to get SSH error messages from build-remote
E.g.

  cannot build on 'ssh://mac1': cannot connect to 'mac1': bash: nix-store: command not found
  cannot build on 'ssh://mac2': cannot connect to 'mac2': Host key verification failed.
  cannot build on 'ssh://mac3': cannot connect to 'mac3': Received disconnect from 213... port 6001:2: Too many authentication failures
  Authentication failed.
2018-03-20 15:25:26 +01:00
Eelco Dolstra ca14b14200
Use boost::format from the boost package
Note that this only requires headers from boost so it doesn't add a
runtime dependency.

Also, use Nixpkgs 18.03.
2018-03-14 19:24:04 +01:00
Eelco Dolstra 6e60141a80
Typo 2018-03-13 17:48:09 +01:00
Will Dietz 56253bb08f rand() -> random(), since we use srandom().
rand() requires we call srand() instead,
but might as well use random().
2018-03-06 17:44:25 -06:00
Will Dietz 6b9a03f5d8 hoist vector out of loop just in case 2018-03-02 10:52:05 -06:00
Will Dietz c89a3d5368 don't allocate large buffers on the stack 2018-03-02 10:52:04 -06:00
Linus Heckemann 919c3c20b3 seccomp: add 32-bit ARM on aarch64-linux
This allows building armv[67]l-linux derivations on compatible aarch64
machines. Failure to add the architecture may result from missing
hardware support, in which case we can't run 32-bit binaries and don't
need to restrict them with seccomp anyway,
2018-02-27 00:32:15 +00:00
Eelco Dolstra d4e93532e2
Fix incorrect (and unnecessary) format string
https://hydra.nixos.org/eval/1434547#tabs-now-fail
2018-02-19 20:46:39 +01:00
Shea Levy e59a8a63e1
Don't silently succeed seccomp setup when !HAVE_SECCOMP.
Running Nix with build users without seccomp on Linux is dangerous,
and administrators should very explicitly opt-in to it.
2018-02-19 09:56:24 -05:00
Shea Levy 690ac7c90b
configure: Add a flag to disable seccomp.
This is needed for new arches where libseccomp support doesn't exist
yet.

Fixes #1878.
2018-02-18 02:35:01 -05:00
Eelco Dolstra 4f09ce7940
Fix 'deadlock: trying to re-acquire self-held lock'
This was caused by derivations with 'allowSubstitutes = false'. Such
derivations will be built locally. However, if there is another
SubstitionGoal that has the output of the first derivation in its
closure, then the path will be simultaneously built and substituted.

There was a check to catch this situation (via pathIsLockedByMe()),
but it no longer worked reliably because substitutions are now done in
another thread. (Thus the comment 'It can't happen between here and
the lockPaths() call below because we're not allowing multi-threading'
was no longer valid.)

The fix is to handle the path already being locked in both
SubstitutionGoal and DerivationGoal.
2018-02-12 17:06:06 +01:00
Eelco Dolstra 960e9c560e
nix: Ensure that the user sees errors from substituters 2018-02-09 15:06:47 +01:00
Eelco Dolstra 84989d3af2
Improve filtering of ANSI escape sequences in build logs
All ANSI sequences except color setting are now filtered out. In
particular, terminal resets (such as from NixOS VM tests) are filtered
out.

Also, fix the completely broken tab character handling.
2018-02-07 15:23:57 +01:00
Eelco Dolstra bb1d046f5c
Allow substituters to be marked as trusted
This is needed by nixos-install, which uses the Nix store on the
installation CD as a substituter. We don't want to disable signature
checking entirely because substitutes from cache.nixos.org should
still be checked. So now we can pas "local?trusted=1" to mark only the
Nix store in /nix as not requiring signatures.

Fixes #1819.
2018-02-05 18:08:30 +01:00
Eelco Dolstra 2175eee9fe
Fix segfault using non-binary cache stores as substituters 2018-02-05 17:46:43 +01:00
Eelco Dolstra 84722d67d2
Remove nix-build --hash
Instead, if a fixed-output derivation produces has an incorrect output
hash, we now unconditionally move the outputs to the path
corresponding with the actual hash and register it as valid. Thus,
after correcting the hash in the Nix expression (e.g. in a fetchurl
call), the fixed-output derivation doesn't have to be built again.

It would still be good to have a command for reporting the actual hash
of a fixed-output derivation (instead of throwing an error), but
"nix-build --hash" didn't do that.
2018-02-03 10:08:05 +01:00
Dan Peebles d43a8b25f0 Fix obscure corner case in name resolution for builtin:fetchurl in sandboxed environments 2018-01-23 14:45:50 -05:00
Eelco Dolstra 3c4c30eadd
Rewrite builtin derivation environment
Also add a test.

Fixes #1803.
Closes #1805.
2018-01-19 15:00:38 +01:00
Eelco Dolstra ba75c69e00
Barf when using a diverted store on macOS
Fixes #1792.
2018-01-15 12:14:43 +01:00
Will Dietz 00e0c416ff Mark comparison call operator as const 2017-12-11 12:08:40 -06:00
Eelco Dolstra b52846ab5b
Show log tail when a remote build fails 2017-11-28 15:36:28 +01:00
Eelco Dolstra 197922ea4e
Merge pull request #1646 from copumpkin/optional-sandbox-local-network
Allow optional localhost network access to sandboxed derivations
2017-10-30 18:54:40 +01:00
Dan Peebles 4a4a009f78 Allow optional localhost network access to sandboxed derivations
This will allow bind and connect to 127.0.0.1, which can reduce purity/
security (if you're running a vulnerable service on localhost) but is
also needed for a ton of test suites, so I'm leaving it turned off by
default but allowing certain derivations to turn it on as needed.

It also allows DNS resolution of arbitrary hostnames but I haven't found
a way to avoid that. In principle I'd just want to allow resolving
localhost but that doesn't seem to be possible.

I don't think this belongs under `build-use-sandbox = relaxed` because we
want it on Hydra and I don't think it's the end of the world.
2017-10-30 17:59:12 +01:00
Eelco Dolstra 9971d875a4
Fix building on clang
https://hydra.nixos.org/build/62945761
2017-10-25 17:20:47 +02:00
Eelco Dolstra 82327e3cc4
exportReferencesGraph: Allow exporting a list of store paths 2017-10-25 15:18:49 +02:00
Eelco Dolstra 3395e3bbc4
Fix exportReferencesGraph in the structured attrs case 2017-10-25 14:08:29 +02:00
Eelco Dolstra 2d5b1b24bf
Pass lists/attrsets to bash as (associative) arrays 2017-10-25 13:01:50 +02:00
Eelco Dolstra 3460e4cf00
More progress indicator improvements
In particular, don't show superfluous "fetching path" and "building
path(s)" messages, and show the current round (with --repeat).
2017-10-24 15:32:38 +02:00
Eelco Dolstra 96051dd057
More progress indicator improvements
Fixes #1599.
2017-10-24 14:47:23 +02:00
Eelco Dolstra be220702a7
Progress indicator: Show on what machine we're building
E.g.

  $ nix build nixpkgs.hello --builders 'root@wendy'
  [1/0/1 built] building hello-2.10 on ssh://root@wendy: checking for minix/config.h... no
2017-10-24 14:24:57 +02:00
Eelco Dolstra fe9d2f974d
Handle log messages from build-remote
This makes the progress indicator show statuses like "connecting to
'root@machine'".
2017-10-24 14:05:22 +02:00
Eelco Dolstra 25f32625e2
Remove the remote-builds option
This is superfluous since you can now just set "builders" to empty,
e.g. "--builders ''".
2017-10-24 11:00:16 +02:00
Eelco Dolstra 37fbfffd8e
Pass all settings to build-remote
This ensures that command line flags such as --builders get passed
correctly.
2017-10-23 20:50:28 +02:00
Dan Peebles 6e5165b773 Shift Darwin sandbox to separate installed files
This makes it slightly more manageable to see at a glance what in a
build's sandbox profile is unique to the build and what is standard. Also
a first step to factoring more of our Darwin logic into scheme functions
that will allow us a bit more flexibility. And of course less of that
nasty codegen in C++! 😀
2017-10-17 19:15:51 -04:00
Eelco Dolstra 1dd29d7aeb
Add option to disable the seccomp filter
I needed this to test ACL/xattr removal in
canonicalisePathMetaData(). Might also be useful if you need to build
old Nixpkgs that doesn't have the required patches to remove
setuid/setgid creation.
2017-10-12 18:21:55 +02:00
Eelco Dolstra 88e6bb76de Communicate the structured log FD to builders
Since we may use a dedicated file descriptor in the future, this
allows us to change it. So builders can do

  if [[ -n $NIX_LOG_FD ]]; then
    echo "@nix { message... }" >&$NIX_LOG_FD
  fi
2017-09-08 11:27:10 +02:00
Eelco Dolstra 0b606aad46
Add automatic garbage collection
Nix can now automatically run the garbage collector during builds or
while adding paths to the store. The option "min-free = <bytes>"
specifies that Nix should run the garbage collector whenever free
space in the Nix store drops below <bytes>. It will then delete
garbage until "max-free" bytes are available.

Garbage collection during builds is asynchronous; running builds are
not paused and new builds are not blocked. However, there also is a
synchronous GC run prior to the first build/substitution.

Currently, no old GC roots are deleted (as in "nix-collect-garbage
-d").
2017-09-05 20:43:42 +02:00
Eelco Dolstra bbdf08bc0f
Call queryMissing() prior to building
Without this, substitute info is fetched sequentially, which is
superslow. In the old UI (e.g. nix-build), we call printMissing(),
which calls queryMissing(), thereby preheating the binary cache
cache. But the new UI doesn't do that.
2017-08-31 16:05:07 +02:00
Eelco Dolstra c2154d4c84
Rename a few configuration options
In particular, drop the "build-" and "gc-" prefixes which are
pointless. So now you can say

  nix build --no-sandbox

instead of

  nix build --no-build-use-sandbox
2017-08-31 14:28:25 +02:00
Eelco Dolstra 2cc345b95f
Give activities a verbosity level again
And print them (separately from the progress bar) given sufficient -v
flags.
2017-08-28 19:13:24 +02:00
Eelco Dolstra 94a0548dc4
Simplify 2017-08-25 21:26:37 +02:00
Eelco Dolstra 0ac35b67b8
Allow derivations to update the build phase
So the progress bar can show

  [1/0/1 built, 0.0 MiB DL] building hello-2.10 (configuring): checking whether pread is declared without a macro... yes
2017-08-25 18:04:05 +02:00
Eelco Dolstra c137c0a5eb
Allow activities to be nested
In particular, this allows more relevant activities ("substituting X")
to supersede inferior ones ("downloading X").
2017-08-25 17:49:40 +02:00
Eelco Dolstra 0e9ddcc306
Restore activity metadata
This allows the progress bar to display "building perl-5.22.3" instead
of "building /nix/store/<hash>-perl-5.22.3.drv".
2017-08-25 15:58:35 +02:00
Eelco Dolstra 1f56235438
Clean up JSON construction 2017-08-21 12:18:46 +02:00
Eelco Dolstra 4af2611bd1
Allow builders to create activities
Actually, currently they can only create download activities. Thus,
downloads by builtins.fetchurl show up in the progress bar.
2017-08-21 12:18:46 +02:00
Eelco Dolstra b4ed97e3a3
nix optimise-store: Show how much space has been freed 2017-08-16 20:56:03 +02:00
Eelco Dolstra 40bffe0a43
Progress indicator: Cleanup 2017-08-16 20:56:03 +02:00
Eelco Dolstra dff12b38f9
Progress indicator: More improvements 2017-08-16 20:56:03 +02:00
Eelco Dolstra bf1f123b09
Progress indicator: Show number of active items 2017-08-16 20:56:03 +02:00
Eelco Dolstra 0e0dcf2c7e
Progress indicator: Unify "copying" and "substituting"
They're the same thing after all.

Example:

  $ nix build --store local?root=/tmp/nix nixpkgs.firefox-unwrapped
  [0/1 built, 49/98 copied, 16.3/92.8 MiB DL, 55.8/309.2 MiB copied] downloading 'https://cache.nixos.org/nar/0pl9li1jigcj2dany47hpmn0r3r48wc4nz48v5mqhh426lgz3bz6.nar.xz'
2017-08-16 20:56:03 +02:00
Eelco Dolstra c36467ad2e
Improve substitution progress indicator
E.g.

  $ nix build --store local?root=/tmp/nix nixpkgs.firefox-unwrapped
  [0/1 built, 1/97/98 fetched, 65.8/92.8 MiB DL, 203.2/309.2 MiB copied] downloading 'https://cache.nixos.org/nar/1czm9fk0svacy4h6a3fzkpafi4f7a9gml36kk8cq1igaghbspg3k.nar.xz'
2017-08-16 20:56:02 +02:00
Eelco Dolstra af765a8eab
Use /proc/self/fd to efficiently close all FDs on Linux
Issue #1506.
2017-08-09 16:22:05 +02:00
Jörg Thalheim 2fd8f8bb99 Replace Unicode quotes in user-facing strings by ASCII
Relevant RFC: NixOS/rfcs#4

$ ag -l | xargs sed -i -e "/\"/s/’/'/g;/\"/s/‘/'/g"
2017-07-30 12:32:45 +01:00
Eelco Dolstra fc3568e263
FD_SETSIZE check: BuildError -> Error
BuildError denotes a permanent build failure, which is not the case
here.
2017-07-20 13:33:13 +02:00
Dmitry Kalinkin d5e1bffd2a
Do not try to fill fd_set with fd>=FD_SETSIZE
This is UB and causes buffer overflow and crash on linux.
2017-07-18 17:51:50 -04:00
Eelco Dolstra a3dc1e65ab
Add X32 to the seccomp filter
Fixes #1432.
2017-07-04 19:00:51 +02:00
Eelco Dolstra 6cf23c3e8f
Add allow-new-privileges option
This allows builds to call setuid binaries. This was previously
possible until we started using seccomp. Turns out that seccomp by
default disallows processes from acquiring new privileges. Generally,
any use of setuid binaries (except those created by the builder
itself) is by definition impure, but some people were relying on this
ability for certain tests.

Example:

  $ nix build '(with import <nixpkgs> {}; runCommand "foo" {} "/run/wrappers/bin/ping -c 1 8.8.8.8; exit 1")' --no-allow-new-privileges
  builder for ‘/nix/store/j0nd8kv85hd6r4kxgnwzvr0k65ykf6fv-foo.drv’ failed with exit code 1; last 2 log lines:
    cannot raise the capability into the Ambient set
    : Operation not permitted

  $ nix build '(with import <nixpkgs> {}; runCommand "foo" {} "/run/wrappers/bin/ping -c 1 8.8.8.8; exit 1")' --allow-new-privileges
  builder for ‘/nix/store/j0nd8kv85hd6r4kxgnwzvr0k65ykf6fv-foo.drv’ failed with exit code 1; last 6 log lines:
    PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
    64 bytes from 8.8.8.8: icmp_seq=1 ttl=46 time=15.2 ms

Fixes #1429.
2017-07-04 15:48:25 +02:00
Eelco Dolstra c0015e87af
Support base-64 hashes
Also simplify the Hash API.

Fixes #1437.
2017-07-04 15:07:41 +02:00
Eelco Dolstra fcca702a96
Replace a few bool flags with enums
Functions like copyClosure() had 3 bool arguments, which creates a
severe risk of mixing up arguments.

Also, implement copyClosure() using copyPaths().
2017-07-03 11:38:08 +02:00
Eelco Dolstra 1888f7889b
macOS: Ugly hack to make the tests succeed
Sandboxes cannot be nested, so if Nix's build runs inside a sandbox,
it cannot use a sandbox itself. I don't see a clean way to detect
whether we're in a sandbox, so use a test-specific hack.

https://github.com/NixOS/nix/issues/1413
2017-06-19 14:26:05 +02:00
Eelco Dolstra 7f5b750b40
Don't run pre-build-hook if we don't have a derivation
This fixes a build failure on OS X when using Hydra or Nix 1.12's
build-remote (since they don't copy the derivation to the build
machine).
2017-06-12 16:07:34 +02:00
Eelco Dolstra c8cc50d46e
Disable the build user mechanism on all platforms except Linux and OS X 2017-06-06 18:52:15 +02:00
Eelco Dolstra 85e93d7b87
Always use the Darwin sandbox
Even with "build-use-sandbox = false", we now use sandboxing with a
permissive profile that allows everything except the creation of
setuid/setgid binaries.
2017-06-06 18:44:49 +02:00
Eelco Dolstra c96e8cd097
OS X sandbox: Improve builtin sandbox profile
Also, add rules to allow fixed-output derivations to access the
network.

These rules are sufficient to build stdenvDarwin without any
__sandboxProfile magic.
2017-05-31 17:25:51 +02:00
Eelco Dolstra 44f3f8048f OS X sandbox: Don't use a deterministic $TMPDIR
This doesn't work because the OS X sandbox cannot bind-mount
path to a different location.
2017-05-31 14:09:00 +02:00
Eelco Dolstra c740c3ce50 OS X sandbox: Store .sb file in $TMPDIR rather than the Nix store
The filename used was not unique and owned by the build user, so
builds could fail with

error: while setting up the build environment: cannot unlink ‘/nix/store/99i210ihnsjacajaw8r33fmgjvzpg6nr-bison-3.0.4.drv.sb’: Permission denied
2017-05-31 14:09:00 +02:00
Eelco Dolstra acc889c821
Darwin sandbox: Use sandbox-defaults.sb
Issue #759.

Also, remove nix.conf from the sandbox since I don't really see a
legitimate reason for builders to access the Nix configuration.
2017-05-30 17:40:12 +02:00
Eelco Dolstra 53a1644187
Darwin sandbox: Disallow creating setuid/setgid binaries
Suggested by Daiderd Jordan.
2017-05-30 17:17:17 +02:00
Eelco Dolstra fe08d17934
Fix seccomp build failure on clang
Fixes

  src/libstore/build.cc:2321:45: error: non-constant-expression cannot be narrowed from type 'int' to 'scmp_datum_t' (aka 'unsigned long') in initializer list [-Wc++11-narrowing]
2017-05-30 14:37:24 +02:00
Eelco Dolstra d552d38758
Shut up some clang warnings 2017-05-30 14:35:50 +02:00
Eelco Dolstra 2ac99a32da
Add a seccomp rule to disallow setxattr() 2017-05-30 13:59:24 +02:00