due to event loop scheduling behavior it's possible for a derivation
goal to fully finish (having seen all paths it was asked to create),
but to not notify the worker of this in time to prevent another goal
asking the recently-finished goal for more outputs. if this happened
the finished goal would ignore the request for more outputs since it
considered itself fully done, and the delayed result reporting would
cause the requesting goal to assume its request had been honored. if
the requested goal had finished *properly* the worker would recreate
it instead of asking for more outputs, and this would succeed. it is
thus safe to always recreate goals once they are done, so we now do.
Change-Id: Ifedd69ca153372c623abe9a9b49cd1523588814f
we'll now loop to update displayed statistics, and use this loop to
limit the update rate to 50 times per second. we could have updated
much more frequently before this (once per iteration of `runImpl`),
much faster than would ever be useful in practice. aggressive stats
updates can even impede progress due to terminal or network delays.
Change-Id: Ifba755a2569f73c919b1fbb06a142c0951395d6d
Worker::run() is now entirely based on the kj event loop and promises,
so we need not handle awakeness of goals manually any more. every goal
can instead, once it has finished a partial work call, defer itself to
being called again in the next iteration of the loop. same end effect.
Change-Id: I320eee2fa60bcebaabd74d1323fa96d1402c1d15
notably we will check whether we want to do GC at all only once during
startup, and we'll only attempt GC every ten seconds rather than every
time a goal has finished a partial work call. this shouldn't cause any
problems in practice since relying on auto-gc is not deterministic and
stores in which builds can fill all remaining free space in merely ten
seconds are severely troubled even when gargage collection runs a lot.
Change-Id: I1175a56bf7f4e531f8be90157ad88750ff2ddec4
Revert submission 1946
Reason for revert: regression in building (found via bisection)
Reported by users:
> error: path '/nix/store/04ca5xwvasz6s3jg0k7njz6rzi0d225w-jq-1.7.1-dev' does not exist in the store
Reverted changes: /q/submissionid:1946
Change-Id: I6f1a4b2f7d7ef5ca430e477fc32bca62fd97036b
nothing needs to signal being still active but not actively pollable,
only that immediate polling for the next goal work phase is in order.
Change-Id: Ia43c1015e94ba4f5f6b9cb92943da608c4a01555
this was immensely inefficient on large caches, as can exist when many
derivations are buildable simultaneously. since we have smart pointers
to goals we can do cache maintenance in goal deleters instead, and use
the exact iterators instead of doing a linear search. this *does* rely
on goals being deleted to remove them from the cache, which isn't true
for toplevel goals. those would have previously been removed when done
in all cases, removing the cache entry when keep-going is set. this is
arguably incorrect since it might result in those goals being retried,
although that could only happen with dynamic derivations or the likes.
(luckily dynamic derivations not complete enough to allow this at all)
Change-Id: I8e750b868393588c33e4829333d370f2c509ce99
makeDerivationGoalCommon had the right idea, but it didn't quite go far
enough. let's do the rest and remove the remaining factory duplication.
Change-Id: I1fe32446bdfb501e81df56226fd962f85720725b
this was a debugging aid from day one that should not have any impact on
build semantics, and if it *does* have an impact on build semantics then
build semantics are seriously broken. keeping the order imposed by these
keys will be impossible once we let a real event loop schedule our jobs.
Change-Id: I5c313324e1f213ab6453d82f41ae5e59de809a5b
without circular references we do not need weak goal pointers except for
caches, which should not prevent goal destructors running. caches though
cannot create circular references even when they keep strong references.
if we removed goals from caches when their work() is fully finished, not
when their destructors are run, we could keep strong pointers in caches.
since we do not gain much from this we keep those pointers weak for now.
Change-Id: I1d4a6850ff5e264443c90eb4531da89f5e97a3a0
have DerivationGoal and its subclasses produce a wrapper promise for
their intermediate results instead, and return this wrapper promise.
Worker already handles promises that do not complete immediately, so
we do not have to duplicate this into an entire result type variant.
Change-Id: Iae8dbf63cfc742afda4d415922a29ac5a3f39348
the new event loop could very occasionally notice that a dependency of
some goal has failed, process the failure, cause the depending goal to
fail accordingly, and in the doing of the latter two steps let further
dependencies that previously have not been reported as failed do their
reporting anyway. in such cases a goal could fail with "1 dependencies
failed", but more than one dependency failure message was shown. we'll
now report the correct number of failed dependency goals in all cases.
Change-Id: I5aa95dcb2db4de4fd5fee8acbf5db833531d81a8
these can be unique rather than shared because shared_ptr has a
converting constructor. preparatory refactor for something else
and not necessary on its own, and the extra allocations we must
do for shared_ptr control blocks isn't usually relevant anyway.
Change-Id: I5391715545240c6ec8e83a031206edafdfc6462f
Since fb38459d6e, each `ref` is appended
with `refs/heads` unless it starts with `refs/` already. This regressed
two use-cases that worked fine before:
* Specifying a commit hash as `ref`: now, if `ref` looks like a commit
hash it will be directly passed to `git fetch`.
* Specifying a tag without `refs/tags` as prefix: now, the fetcher prepends
`refs/*` to a ref that doesn't start with `refs/` and doesn't look
like a commit hash. That way, both a branch and a tag specified in
`ref` can be fetched.
The order of preference in git is
* file in `refs/` (e.g. `HEAD`)
* file in `refs/tags/`
* file in `refs/heads` (i.e. a branch)
After fetching `refs/*`, ref is resolved the same way as git does.
Change-Id: Idd49b97cbdc8c6fdc8faa5a48bef3dec25e4ccc3
This was already the de facto requirement, we use the method `full_path`
on a file object (introduced in Meson 1.4.0) in the functional test
suite's build.
This version of Meson is in NixOS 24.05, so there should be no
compatibility issues should this make it into a backported release of
Lix.
CC: lix-project/lix#247
Change-Id: I5c640824807353b6eb4287e7ed09c4e89a4bdde2
Using `configure_file` to copy files has been deprecated since Meson 0.64.0.
The intended replacement is the `fs.copyfile` method.
This removes the following deprecation warning that arises when a minimum
Meson version is specified:
``
Project [...] uses feature deprecated since '0.64.0': copy arg in configure_file. Use fs.copyfile instead
``
Change-Id: I09ffc92e96311ef9ed594343a0a16d51e74b114a
In Meson, `install_subdir` is meant to be used with directories in the source
directory. When using it to install the HTML manual, we provide it with a path
under the build directory.
We should instead specify an install directory for the HTML manual as part of
the custom target that builds it.
What we do currently isn't broken, just semantically incorrect. Changing it does
get rid of the following deprecation warning, though:
``
Project [...] uses feature deprecated since '0.60.0': install_subdir with empty directory. It worked by accident and is buggy. Use install_emptydir instead.
``
Change-Id: I259583b7bdff8ecbb3b342653d70dc5f034c7fad
also gets rid of explicit strong references to dependencies of any goal,
and weak references to dependers as well. those are now only held within
promises representing goal completion and thus independent of the goal's
relation to each other. the weak references to dependers was only needed
for notifications, and that's much better handled entirely by kj itself.
Change-Id: I00d06df9090f8d6336ee4bb0c1313a7052fb016b
now that we have an event loop in the worker we can use it and its
magical execution suspending properties to replace the slot counts
we managed explicitly with semaphores and raii tokens. technically
this would not have needed an event loop base to be doable, but it
is a whole lot easier to wait for a token to be available if there
is a callback mechanism ready for use that doesn't require a whole
damn dedicated abstract method in Goal to work, and specific calls
to that dedicated method strewn all over the worker implementation
Change-Id: I1da7cf386d94e2bbf2dba9b53ff51dbce6a0cff7
with waitForAWhile turned into promised the core functionality of
waitForInput is now merely to let gc run every so often if needed
Change-Id: I68da342bbc1d67653901cf4502dabfa5bc947628
this simplifies waitForInput quite a lot, and at the same time makes
polling less thundering-herd-y. it even fixes early polling wakeups!
Change-Id: I6dfa62ce91729b8880342117d71af5ae33366414
this removes the rather janky did-you-mean-async poll loop we had so
far. sadly kj does not play well with pty file descriptors, so we do
have to add our own async input stream that does not eat pty EIO and
turns it into an exception. that's still a *lot* better than the old
code, and using a real even loop makes everything else easier later.
Change-Id: Idd7e0428c59758602cc530bcad224cd2fed4c15e
When `nix fmt` is called without an argument, Nix appends the "." argument before calling the formatter. The comment in the code is:
> Format the current flake out of the box
This also happens when formatting sub-folders.
This means that the formatter is now unable to distinguish, as an interface, whether the "." argument is coming from the flake or the user's intent to format the current folder. This decision should be up to the formatter.
Treefmt, for example, will automatically look up the project's root and format all the files. This is the desired behaviour. But because the "." argument is passed, it cannot function as expected.
Upstream-PR: https://github.com/nixos/nix/pull/11438
Change-Id: I60fb6b3ed4ec1b24f81b5f0d76c0be98470817ce
like kj::joinPromisesFailFast this allows waiting for the results of
multiple promises at once, but unlike it not all input promises must
be complete (or any of them failed) for results to become available.
Change-Id: I0e4a37e7bd90651d56b33d0bc5afbadc56cde70c
like a normal semaphore, but with awaitable acquire actions. this is
primarily intended as an intermediate concurrency limiting device in
the Worker code, but it may find other uses over time. we do not use
std::counting_semaphore as a base because the counter of that is not
inspectable as will be needed for Worker. we also do not need atomic
operations for cross-thread consistency since we don't have multiple
threads (thanks to kj event loops being confined to a single thread)
Change-Id: Ie2bcb107f3a2c0185138330f7cbba4cec6cbdd95
Without this, verifying TLS certificates would fail on macOS, as well
as any system that doesn't have a certificate file at /etc/ssl/certs/ca-certificates.crt,
which includes e.g. Fedora.
Change-Id: Iaa2e0e9db3747645b5482c82e3e0e4e8f229f5f9
This is better for privacy and to avoid leaking netrc credentials in a
MITM attack, but also the assumption that we check the hash no longer
holds in some cases (in particular for impure derivations).
Partially reverts 5db358d4d7.
(cherry picked from commit c04bc17a5a0fdcb725a11ef6541f94730112e7b6)
(cherry picked from commit f2f47fa725fc87bfb536de171a2ea81f2789c9fb)
(cherry picked from commit 7b39cd631e0d3c3d238015c6f450c59bbc9cbc5b)
Upstream-PR: https://github.com/NixOS/nix/pull/11585
Change-Id: Ia973420f6098113da05a594d48394ce1fe41fbb9
These stack traces kind of suck for the reasons mentioned on the
CppTrace page here (no symbols for inline functions is a major one):
https://github.com/jeremy-rifkin/cpptrace
I would consider using CppTrace if it were packaged, but to be honest, I
think that the more reasonable option is actually to move entirely to
out-of-process crash handling and symbolization.
The reason for this is that if you want to generate anything of
substance on SIGSEGV or really any deadly signal, you are stuck in
async-signal-safe land, which is not a place to be trying to run a
symbolizer. LLVM does it anyway, probably carefully, and chromium *can*
do it on debug builds but in general uses crashpad:
https://source.chromium.org/chromium/chromium/src/+/main:base/debug/stack_trace_posix.cc;l=974;drc=82dff63dbf9db05e9274e11d9128af7b9f51ceaa;bpv=1;bpt=1
However, some stack traces are better than *no* stack traces when we get
mystery exceptions falling out the bottom of the program. I've also
promoted the path for "mystery exceptions falling out the bottom of the
program" to hard crash and generate a core dump because although there's
been some months since the last one of these, these are nonetheless
always *atrociously* diagnosed.
We can't improve the crash handling further until either we use Crashpad
(which involves more C++ deps, no thanks) or we put in the ostensibly
work in progress Rust minidump infrastructure, in which case we need to
finish full support for Rust in libutil first.
Sample report:
Lix crashed. This is a bug. We would appreciate if you report it at https://git.lix.systems/lix-project/lix/issues with the following information included:
Exception: std::runtime_error: lol
Stack trace:
0# nix::printStackTrace() in /home/jade/lix/lix3/build/src/nix/../libutil/liblixutil.so
1# 0x000073C9862331F2 in /home/jade/lix/lix3/build/src/nix/../libmain/liblixmain.so
2# 0x000073C985F2E21A in /nix/store/p44qan69linp3ii0xrviypsw2j4qdcp2-gcc-13.2.0-lib/lib/libstdc++.so.6
3# 0x000073C985F2E285 in /nix/store/p44qan69linp3ii0xrviypsw2j4qdcp2-gcc-13.2.0-lib/lib/libstdc++.so.6
4# nix::handleExceptions(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::function<void ()>) in /home/jade/lix/lix3/build/src/nix/../libmain/liblixmain.so
5# 0x00005CF65B6B048B in /home/jade/lix/lix3/build/src/nix/nix
6# 0x000073C985C8810E in /nix/store/dbcw19dshdwnxdv5q2g6wldj6syyvq7l-glibc-2.39-52/lib/libc.so.6
7# __libc_start_main in /nix/store/dbcw19dshdwnxdv5q2g6wldj6syyvq7l-glibc-2.39-52/lib/libc.so.6
8# 0x00005CF65B610335 in /home/jade/lix/lix3/build/src/nix/nix
Change-Id: I1a9f6d349b617fd7145a37159b78ecb9382cb4e9
jade
eldritch horrors
Rebecca Turner
Olivia Crain
raito
Jonas Chevalier
Maximilian Bosch
puck
