lix/doc/manual/expressions/builtins.xml

1664 lines
54 KiB
XML
Raw Normal View History

<section xmlns="http://docbook.org/ns/docbook"
2014-08-27 16:41:09 +00:00
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id='ssec-builtins'>
2014-08-27 16:41:09 +00:00
<title>Built-in Functions</title>
<para>This section lists the functions and constants built into the
Nix expression evaluator. (The built-in function
<function>derivation</function> is discussed above.) Some built-ins,
such as <function>derivation</function>, are always in scope of every
Nix expression; you can just access them right away. But to prevent
polluting the namespace too much, most built-ins are not in scope.
Instead, you can access them through the <varname>builtins</varname>
built-in value, which is a set that contains all built-in functions
and values. For instance, <function>derivation</function> is also
available as <function>builtins.derivation</function>.</para>
<variablelist>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-abort'>
<term><function>abort</function> <emphasis>s</emphasis></term>
<term><function>builtins.abort</function> <emphasis>s</emphasis></term>
<listitem><para>Abort Nix expression evaluation, print error
message <emphasis>s</emphasis>.</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-add'>
<term><function>builtins.add</function>
<emphasis>e1</emphasis> <emphasis>e2</emphasis>
</term>
2016-01-06 07:41:53 +00:00
<listitem><para>Return the sum of the numbers
<emphasis>e1</emphasis> and
<emphasis>e2</emphasis>.</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-all'>
<term><function>builtins.all</function>
<emphasis>pred</emphasis> <emphasis>list</emphasis></term>
<listitem><para>Return <literal>true</literal> if the function
<emphasis>pred</emphasis> returns <literal>true</literal>
for all elements of <emphasis>list</emphasis>,
and <literal>false</literal> otherwise.</para></listitem>
</varlistentry>
<varlistentry xml:id='builtin-any'>
<term><function>builtins.any</function>
<emphasis>pred</emphasis> <emphasis>list</emphasis></term>
<listitem><para>Return <literal>true</literal> if the function
<emphasis>pred</emphasis> returns <literal>true</literal>
for at least one element of <emphasis>list</emphasis>,
and <literal>false</literal> otherwise.</para></listitem>
</varlistentry>
<varlistentry xml:id='builtin-attrNames'>
<term><function>builtins.attrNames</function>
<emphasis>set</emphasis></term>
<listitem><para>Return the names of the attributes in the set
<emphasis>set</emphasis> in an alphabetically sorted list. For instance,
<literal>builtins.attrNames { y = 1; x = "foo"; }</literal>
2014-10-29 15:18:03 +00:00
evaluates to <literal>[ "x" "y" ]</literal>.</para></listitem>
2014-10-29 15:18:03 +00:00
</varlistentry>
2014-10-29 15:18:03 +00:00
<varlistentry xml:id='builtin-attrValues'>
<term><function>builtins.attrValues</function>
<emphasis>set</emphasis></term>
2014-10-29 15:18:03 +00:00
<listitem><para>Return the values of the attributes in the set
<emphasis>set</emphasis> in the order corresponding to the
2014-10-29 15:18:03 +00:00
sorted attribute names.</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-baseNameOf'>
<term><function>baseNameOf</function> <emphasis>s</emphasis></term>
<listitem><para>Return the <emphasis>base name</emphasis> of the
string <emphasis>s</emphasis>, that is, everything following
the final slash in the string. This is similar to the GNU
<command>basename</command> command.</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-bitAnd'>
<term><function>builtins.bitAnd</function>
<emphasis>e1</emphasis> <emphasis>e2</emphasis></term>
2018-05-24 12:48:48 +00:00
<listitem><para>Return the bitwise AND of the integers
<emphasis>e1</emphasis> and
<emphasis>e2</emphasis>.</para></listitem>
2018-05-24 12:48:48 +00:00
</varlistentry>
<varlistentry xml:id='builtin-bitOr'>
<term><function>builtins.bitOr</function>
<emphasis>e1</emphasis> <emphasis>e2</emphasis></term>
2018-05-24 12:48:48 +00:00
<listitem><para>Return the bitwise OR of the integers
<emphasis>e1</emphasis> and
<emphasis>e2</emphasis>.</para></listitem>
2018-05-24 12:48:48 +00:00
</varlistentry>
<varlistentry xml:id='builtin-bitXor'>
<term><function>builtins.bitXor</function>
<emphasis>e1</emphasis> <emphasis>e2</emphasis></term>
2018-05-24 12:48:48 +00:00
<listitem><para>Return the bitwise XOR of the integers
<emphasis>e1</emphasis> and
<emphasis>e2</emphasis>.</para></listitem>
2018-05-24 12:48:48 +00:00
</varlistentry>
<varlistentry xml:id='builtin-builtins'>
<term><varname>builtins</varname></term>
<listitem><para>The set <varname>builtins</varname> contains all
the built-in functions and values. You can use
<varname>builtins</varname> to test for the availability of
features in the Nix installation, e.g.,
<programlisting>
if builtins ? getEnv then builtins.getEnv "PATH" else ""</programlisting>
This allows a Nix expression to fall back gracefully on older Nix
2009-04-14 13:03:27 +00:00
installations that dont have the desired built-in
function.</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-compareVersions'>
<term><function>builtins.compareVersions</function>
<emphasis>s1</emphasis> <emphasis>s2</emphasis></term>
2008-11-19 17:27:52 +00:00
<listitem><para>Compare two strings representing versions and
return <literal>-1</literal> if version
<emphasis>s1</emphasis> is older than version
<emphasis>s2</emphasis>, <literal>0</literal> if they are
2008-11-19 17:27:52 +00:00
the same, and <literal>1</literal> if
<emphasis>s1</emphasis> is newer than
<emphasis>s2</emphasis>. The version comparison algorithm
2008-11-19 17:27:52 +00:00
is the same as the one used by <link
linkend="ssec-version-comparisons"><command>nix-env
-u</command></link>.</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-concatLists'>
<term><function>builtins.concatLists</function>
<emphasis>lists</emphasis></term>
2012-12-04 16:15:32 +00:00
<listitem><para>Concatenate a list of lists into a single
list.</para></listitem>
</varlistentry>
<varlistentry xml:id='builtin-concatStringsSep'>
<term><function>builtins.concatStringsSep</function>
<emphasis>separator</emphasis> <emphasis>list</emphasis></term>
<listitem><para>Concatenate a list of strings with a separator
between each element, e.g. <literal>concatStringsSep "/"
["usr" "local" "bin"] == "usr/local/bin"</literal></para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-currentSystem'>
<term><varname>builtins.currentSystem</varname></term>
<listitem><para>The built-in value <varname>currentSystem</varname>
evaluates to the Nix platform identifier for the Nix installation
on which the expression is being evaluated, such as
<literal>"i686-linux"</literal> or
<literal>"x86_64-darwin"</literal>.</para></listitem>
</varlistentry>
<!--
<varlistentry><term><function>currentTime</function></term>
<listitem><para>The built-in value <varname>currentTime</varname>
returns the current system time in seconds since 00:00:00 1/1/1970
UTC. Due to the evaluation model of Nix expressions
(<emphasis>maximal laziness</emphasis>), it always yields the same
value within an execution of Nix.</para></listitem>
</varlistentry>
-->
2012-12-04 16:15:32 +00:00
<!--
<varlistentry><term><function>dependencyClosure</function></term>
<listitem><para>TODO</para></listitem>
</varlistentry>
-->
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-deepSeq'>
<term><function>builtins.deepSeq</function>
<emphasis>e1</emphasis> <emphasis>e2</emphasis></term>
2014-10-29 15:18:03 +00:00
<listitem><para>This is like <literal>seq
<emphasis>e1</emphasis>
<emphasis>e2</emphasis></literal>, except that
<emphasis>e1</emphasis> is evaluated
2014-10-29 15:18:03 +00:00
<emphasis>deeply</emphasis>: if its a list or set, its elements
or attributes are also evaluated recursively.</para></listitem>
</varlistentry>
<varlistentry xml:id='builtin-derivation'>
<term><function>derivation</function>
<emphasis>attrs</emphasis></term>
<term><function>builtins.derivation</function>
<emphasis>attrs</emphasis></term>
<listitem><para><function>derivation</function> is described in
<xref linkend='ssec-derivation' />.</para></listitem>
</varlistentry>
<varlistentry xml:id='builtin-dirOf'>
<term><function>dirOf</function> <emphasis>s</emphasis></term>
<term><function>builtins.dirOf</function> <emphasis>s</emphasis></term>
<listitem><para>Return the directory part of the string
<emphasis>s</emphasis>, that is, everything before the final
slash in the string. This is similar to the GNU
<command>dirname</command> command.</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-div'>
<term><function>builtins.div</function>
<emphasis>e1</emphasis> <emphasis>e2</emphasis></term>
2008-11-19 17:27:52 +00:00
2016-01-06 07:41:53 +00:00
<listitem><para>Return the quotient of the numbers
<emphasis>e1</emphasis> and
<emphasis>e2</emphasis>.</para></listitem>
2008-11-19 17:27:52 +00:00
</varlistentry>
<varlistentry xml:id='builtin-elem'>
<term><function>builtins.elem</function>
<emphasis>x</emphasis> <emphasis>xs</emphasis></term>
2012-12-04 16:15:32 +00:00
<listitem><para>Return <literal>true</literal> if a value equal to
<emphasis>x</emphasis> occurs in the list
<emphasis>xs</emphasis>, and <literal>false</literal>
2012-12-04 16:15:32 +00:00
otherwise.</para></listitem>
</varlistentry>
<varlistentry xml:id='builtin-elemAt'>
<term><function>builtins.elemAt</function>
<emphasis>xs</emphasis> <emphasis>n</emphasis></term>
2012-12-04 16:15:32 +00:00
<listitem><para>Return element <emphasis>n</emphasis> from
the list <emphasis>xs</emphasis>. Elements are counted
2019-10-08 18:02:40 +00:00
starting from 0. A fatal error occurs if the index is out of
2012-12-04 16:15:32 +00:00
bounds.</para></listitem>
</varlistentry>
<varlistentry xml:id='builtin-fetchurl'>
<term><function>builtins.fetchurl</function>
<emphasis>url</emphasis></term>
2015-06-01 13:14:44 +00:00
<listitem><para>Download the specified URL and return the path of
the downloaded file. This function is not available if <link
linkend="conf-restrict-eval">restricted evaluation mode</link> is
enabled.</para></listitem>
</varlistentry>
<varlistentry xml:id='builtin-fetchTarball'>
<term><function>fetchTarball</function>
<emphasis>url</emphasis></term>
<term><function>builtins.fetchTarball</function>
<emphasis>url</emphasis></term>
2015-06-01 13:14:44 +00:00
<listitem><para>Download the specified URL, unpack it and return
the path of the unpacked tree. The file must be a tape archive
(<filename>.tar</filename>) compressed with
<literal>gzip</literal>, <literal>bzip2</literal> or
<literal>xz</literal>. The top-level path component of the files
in the tarball is removed, so it is best if the tarball contains a
single directory at top level. The typical use of the function is
to obtain external Nix expression dependencies, such as a
particular version of Nixpkgs, e.g.
<programlisting>
with import (fetchTarball https://github.com/NixOS/nixpkgs/archive/nixos-14.12.tar.gz) {};
2015-06-01 13:14:44 +00:00
stdenv.mkDerivation { … }
</programlisting>
</para>
<para>The fetched tarball is cached for a certain amount of time
(1 hour by default) in <filename>~/.cache/nix/tarballs/</filename>.
You can change the cache timeout either on the command line with
<option>--option tarball-ttl <emphasis>number of seconds</emphasis></option> or
in the Nix configuration file with this option:
<literal><xref linkend="conf-tarball-ttl" /> <emphasis>number of seconds to cache</emphasis></literal>.
</para>
2015-06-01 13:14:44 +00:00
<para>Note that when obtaining the hash with <varname>nix-prefetch-url
</varname> the option <varname>--unpack</varname> is required.
</para>
<para>This function can also verify the contents against a hash.
In that case, the function takes a set instead of a URL. The set
requires the attribute <varname>url</varname> and the attribute
<varname>sha256</varname>, e.g.
<programlisting>
with import (fetchTarball {
url = "https://github.com/NixOS/nixpkgs/archive/nixos-14.12.tar.gz";
sha256 = "1jppksrfvbk5ypiqdz4cddxdl8z6zyzdb2srq8fcffr327ld5jj2";
}) {};
stdenv.mkDerivation { … }
</programlisting>
2015-06-01 13:14:44 +00:00
</para>
<para>This function is not available if <link
linkend="conf-restrict-eval">restricted evaluation mode</link> is
enabled.</para></listitem>
</varlistentry>
2018-03-22 23:12:11 +00:00
<varlistentry xml:id='builtin-fetchGit'>
2018-03-22 23:12:11 +00:00
<term>
<function>builtins.fetchGit</function>
<emphasis>args</emphasis>
2018-03-22 23:12:11 +00:00
</term>
<listitem>
<para>
Fetch a path from git. <emphasis>args</emphasis> can be
2018-03-22 23:12:11 +00:00
a URL, in which case the HEAD of the repo at that URL is
fetched. Otherwise, it can be an attribute with the following
attributes (all except <varname>url</varname> optional):
</para>
<variablelist>
<varlistentry>
<term>url</term>
<listitem>
<para>
The URL of the repo.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>name</term>
<listitem>
<para>
The name of the directory the repo should be exported to
in the store. Defaults to the basename of the URL.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>rev</term>
<listitem>
<para>
The git revision to fetch. Defaults to the tip of
<varname>ref</varname>.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>ref</term>
<listitem>
<para>
The git ref to look for the requested revision under.
This is often a branch or tag name. Defaults to
<literal>HEAD</literal>.
</para>
<para>
By default, the <varname>ref</varname> value is prefixed
with <literal>refs/heads/</literal>. As of Nix 2.3.0
Nix will not prefix <literal>refs/heads/</literal> if
<varname>ref</varname> starts with <literal>refs/</literal>.
</para>
2018-03-22 23:12:11 +00:00
</listitem>
</varlistentry>
<varlistentry>
<term>submodules</term>
<listitem>
<para>
A Boolean parameter that specifies whether submodules
should be checked out. Defaults to
<literal>false</literal>.
</para>
</listitem>
</varlistentry>
2018-03-22 23:12:11 +00:00
</variablelist>
2018-08-31 13:32:59 +00:00
<para>Here are some examples of how to use
<literal>fetchGit</literal>.</para>
<itemizedlist>
<listitem>
<para>To fetch a private repository over SSH:</para>
<programlisting>builtins.fetchGit {
url = "git@github.com:my-secret/repository.git";
2018-08-31 13:32:59 +00:00
ref = "master";
rev = "adab8b916a45068c044658c4158d81878f9ed1c3";
}</programlisting>
</listitem>
<listitem>
<para>To fetch an arbitrary reference:</para>
<programlisting>builtins.fetchGit {
url = "https://github.com/NixOS/nix.git";
ref = "refs/heads/0.5-release";
}</programlisting>
</listitem>
<listitem>
<para>
If the revision you're looking for is in the default branch
of the git repository you don't strictly need to specify
the branch name in the <varname>ref</varname> attribute.
</para>
<para>
However, if the revision you're looking for is in a future
branch for the non-default branch you will need to specify
the the <varname>ref</varname> attribute as well.
</para>
<programlisting>builtins.fetchGit {
2018-08-31 13:32:59 +00:00
url = "https://github.com/nixos/nix.git";
rev = "841fcbd04755c7a2865c51c1e2d3b045976b7452";
ref = "1.11-maintenance";
}</programlisting>
<note>
<para>
It is nice to always specify the branch which a revision
belongs to. Without the branch being specified, the
fetcher might fail if the default branch changes.
Additionally, it can be confusing to try a commit from a
non-default branch and see the fetch fail. If the branch
is specified the fault is much more obvious.
</para>
</note>
</listitem>
<listitem>
2018-08-31 13:32:59 +00:00
<para>
If the revision you're looking for is in the default branch
of the git repository you may omit the
<varname>ref</varname> attribute.
2018-08-31 13:32:59 +00:00
</para>
<programlisting>builtins.fetchGit {
2018-08-31 13:32:59 +00:00
url = "https://github.com/nixos/nix.git";
rev = "841fcbd04755c7a2865c51c1e2d3b045976b7452";
}</programlisting>
</listitem>
2018-08-31 13:32:59 +00:00
<listitem>
<para>To fetch a specific tag:</para>
<programlisting>builtins.fetchGit {
2018-08-31 13:32:59 +00:00
url = "https://github.com/nixos/nix.git";
ref = "refs/tags/1.9";
2018-08-31 13:32:59 +00:00
}</programlisting>
</listitem>
<listitem>
<para>To fetch the latest version of a remote branch:</para>
2018-08-31 13:32:59 +00:00
<programlisting>builtins.fetchGit {
url = "ssh://git@github.com/nixos/nix.git";
ref = "master";
}</programlisting>
<note><para>Nix will refetch the branch in accordance to
<xref linkend="conf-tarball-ttl" />.</para></note>
<note><para>This behavior is disabled in <emphasis>Pure
evaluation mode</emphasis>.</para></note>
</listitem>
</itemizedlist>
2018-03-22 23:12:11 +00:00
</listitem>
</varlistentry>
2015-06-01 13:14:44 +00:00
2012-12-04 16:15:32 +00:00
<varlistentry><term><function>builtins.filter</function>
<emphasis>f</emphasis> <emphasis>xs</emphasis></term>
2012-12-04 16:15:32 +00:00
<listitem><para>Return a list consisting of the elements of
<emphasis>xs</emphasis> for which the function
<emphasis>f</emphasis> returns
2012-12-04 16:15:32 +00:00
<literal>true</literal>.</para></listitem>
</varlistentry>
<varlistentry xml:id='builtin-filterSource'>
<term><function>builtins.filterSource</function>
<emphasis>e1</emphasis> <emphasis>e2</emphasis></term>
<listitem>
<para>This function allows you to copy sources into the Nix
store while filtering certain files. For instance, suppose that
you want to use the directory <filename>source-dir</filename> as
an input to a Nix expression, e.g.
<programlisting>
stdenv.mkDerivation {
...
src = ./source-dir;
}
</programlisting>
However, if <filename>source-dir</filename> is a Subversion
working copy, then all those annoying <filename>.svn</filename>
subdirectories will also be copied to the store. Worse, the
contents of those directories may change a lot, causing lots of
spurious rebuilds. With <function>filterSource</function> you
can filter out the <filename>.svn</filename> directories:
<programlisting>
src = builtins.filterSource
(path: type: type != "directory" || baseNameOf path != ".svn")
./source-dir;
</programlisting>
</para>
<para>Thus, the first argument <emphasis>e1</emphasis>
must be a predicate function that is called for each regular
file, directory or symlink in the source tree
<emphasis>e2</emphasis>. If the function returns
<literal>true</literal>, the file is copied to the Nix store,
otherwise it is omitted. The function is called with two
arguments. The first is the full path of the file. The second
is a string that identifies the type of the file, which is
either <literal>"regular"</literal>,
<literal>"directory"</literal>, <literal>"symlink"</literal> or
<literal>"unknown"</literal> (for other kinds of files such as
device nodes or fifos — but note that those cannot be copied to
the Nix store, so if the predicate returns
<literal>true</literal> for them, the copy will fail). If you
exclude a directory, the entire corresponding subtree of
<emphasis>e2</emphasis> will be excluded.</para>
</listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-foldl-prime'>
<term><function>builtins.foldl</function>
<emphasis>op</emphasis> <emphasis>nul</emphasis> <emphasis>list</emphasis></term>
2015-07-23 15:03:02 +00:00
<listitem><para>Reduce a list by applying a binary operator, from
left to right, e.g. <literal>foldl op nul [x0 x1 x2 ...] = op (op
(op nul x0) x1) x2) ...</literal>. The operator is applied
strictly, i.e., its arguments are evaluated first. For example,
<literal>foldl (x: y: x + y) 0 [1 2 3]</literal> evaluates to
6.</para></listitem>
</varlistentry>
<varlistentry xml:id='builtin-functionArgs'>
<term><function>builtins.functionArgs</function>
<emphasis>f</emphasis></term>
<listitem><para>
Return a set containing the names of the formal arguments expected
by the function <emphasis>f</emphasis>.
The value of each attribute is a Boolean denoting whether the corresponding
argument has a default value. For instance,
<literal>functionArgs ({ x, y ? 123}: ...) = { x = false; y = true; }</literal>.
</para>
<para>"Formal argument" here refers to the attributes pattern-matched by
the function. Plain lambdas are not included, e.g.
<literal>functionArgs (x: ...) = { }</literal>.
</para></listitem>
</varlistentry>
<varlistentry xml:id='builtin-fromJSON'>
<term><function>builtins.fromJSON</function> <emphasis>e</emphasis></term>
<listitem><para>Convert a JSON string to a Nix
value. For example,
<programlisting>
builtins.fromJSON ''{"x": [1, 2, 3], "y": null}''
</programlisting>
returns the value <literal>{ x = [ 1 2 3 ]; y = null;
}</literal>.</para></listitem>
</varlistentry>
<varlistentry xml:id='builtin-genList'>
<term><function>builtins.genList</function>
<emphasis>generator</emphasis> <emphasis>length</emphasis></term>
<listitem><para>Generate list of size
<emphasis>length</emphasis>, with each element
<emphasis>i</emphasis> equal to the value returned by
<emphasis>generator</emphasis> <literal>i</literal>. For
example,
<programlisting>
builtins.genList (x: x * x) 5
</programlisting>
returns the list <literal>[ 0 1 4 9 16 ]</literal>.</para></listitem>
</varlistentry>
<varlistentry xml:id='builtin-getAttr'>
<term><function>builtins.getAttr</function>
<emphasis>s</emphasis> <emphasis>set</emphasis></term>
<listitem><para><function>getAttr</function> returns the attribute
named <emphasis>s</emphasis> from
<emphasis>set</emphasis>. Evaluation aborts if the
attribute doesnt exist. This is a dynamic version of the
<literal>.</literal> operator, since <emphasis>s</emphasis>
is an expression rather than an identifier.</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-getEnv'>
<term><function>builtins.getEnv</function>
<emphasis>s</emphasis></term>
<listitem><para><function>getEnv</function> returns the value of
the environment variable <emphasis>s</emphasis>, or an empty
string if the variable doesnt exist. This function should be
used with care, as it can introduce all sorts of nasty environment
dependencies in your Nix expression.</para>
<para><function>getEnv</function> is used in Nix Packages to
locate the file <filename>~/.nixpkgs/config.nix</filename>, which
contains user-local settings for Nix Packages. (That is, it does
a <literal>getEnv "HOME"</literal> to locate the users home
directory.)</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-hasAttr'>
<term><function>builtins.hasAttr</function>
<emphasis>s</emphasis> <emphasis>set</emphasis></term>
<listitem><para><function>hasAttr</function> returns
<literal>true</literal> if <emphasis>set</emphasis> has an
attribute named <emphasis>s</emphasis>, and
<literal>false</literal> otherwise. This is a dynamic version of
the <literal>?</literal> operator, since
<emphasis>s</emphasis> is an expression rather than an
identifier.</para></listitem>
</varlistentry>
<varlistentry xml:id='builtin-hashString'>
<term><function>builtins.hashString</function>
<emphasis>type</emphasis> <emphasis>s</emphasis></term>
<listitem><para>Return a base-16 representation of the
cryptographic hash of string <emphasis>s</emphasis>. The
hash algorithm specified by <emphasis>type</emphasis> must
be one of <literal>"md5"</literal>, <literal>"sha1"</literal>,
<literal>"sha256"</literal> or <literal>"sha512"</literal>.</para></listitem>
</varlistentry>
<varlistentry xml:id='builtin-hashFile'>
<term><function>builtins.hashFile</function>
<emphasis>type</emphasis> <emphasis>p</emphasis></term>
<listitem><para>Return a base-16 representation of the
cryptographic hash of the file at path <emphasis>p</emphasis>. The
hash algorithm specified by <emphasis>type</emphasis> must
be one of <literal>"md5"</literal>, <literal>"sha1"</literal>,
<literal>"sha256"</literal> or <literal>"sha512"</literal>.</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-head'>
<term><function>builtins.head</function>
<emphasis>list</emphasis></term>
<listitem><para>Return the first element of a list; abort
evaluation if the argument isnt a list or is an empty list. You
can test whether a list is empty by comparing it with
<literal>[]</literal>.</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-import'>
<term><function>import</function>
<emphasis>path</emphasis></term>
<term><function>builtins.import</function>
<emphasis>path</emphasis></term>
<listitem><para>Load, parse and return the Nix expression in the
file <emphasis>path</emphasis>. If <emphasis>path
</emphasis> is a directory, the file <filename>default.nix
</filename> in that directory is loaded. Evaluation aborts if the
file doesnt exist or contains an incorrect Nix expression.
<function>import</function> implements Nixs module system: you
can put any Nix expression (such as a set or a function) in a
separate file, and use it from Nix expressions in other
files.</para>
2019-10-21 21:11:26 +00:00
<note><para>Unlike some languages, <function>import</function> is a regular
2019-10-21 21:16:55 +00:00
function in Nix. Paths using the angle bracket syntax (e.g., <function>
import</function> <emphasis>&lt;foo&gt;</emphasis>) are normal path
2019-10-21 21:11:26 +00:00
values (see <xref linkend='ssec-values' />).</para></note>
<para>A Nix expression loaded by <function>import</function> must
not contain any <emphasis>free variables</emphasis> (identifiers
that are not defined in the Nix expression itself and are not
built-in). Therefore, it cannot refer to variables that are in
scope at the call site. For instance, if you have a calling
expression
2012-12-04 16:15:32 +00:00
<programlisting>
rec {
x = 123;
y = import ./foo.nix;
}</programlisting>
then the following <filename>foo.nix</filename> will give an
error:
<programlisting>
x + 456</programlisting>
since <varname>x</varname> is not in scope in
<filename>foo.nix</filename>. If you want <varname>x</varname>
to be available in <filename>foo.nix</filename>, you should pass
it as a function argument:
<programlisting>
rec {
x = 123;
y = import ./foo.nix x;
}</programlisting>
and
<programlisting>
x: x + 456</programlisting>
(The function argument doesnt have to be called
<varname>x</varname> in <filename>foo.nix</filename>; any name
would work.)</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-intersectAttrs'>
<term><function>builtins.intersectAttrs</function>
<emphasis>e1</emphasis> <emphasis>e2</emphasis></term>
2009-11-04 16:52:35 +00:00
<listitem><para>Return a set consisting of the attributes in the
set <emphasis>e2</emphasis> that also exist in the set
<emphasis>e1</emphasis>.</para></listitem>
2009-11-04 16:52:35 +00:00
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-isAttrs'>
<term><function>builtins.isAttrs</function>
<emphasis>e</emphasis></term>
<listitem><para>Return <literal>true</literal> if
<emphasis>e</emphasis> evaluates to a set, and
<literal>false</literal> otherwise.</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-isList'>
<term><function>builtins.isList</function>
<emphasis>e</emphasis></term>
<listitem><para>Return <literal>true</literal> if
<emphasis>e</emphasis> evaluates to a list, and
<literal>false</literal> otherwise.</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-isFunction'><term><function>builtins.isFunction</function>
<emphasis>e</emphasis></term>
<listitem><para>Return <literal>true</literal> if
<emphasis>e</emphasis> evaluates to a function, and
<literal>false</literal> otherwise.</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-isString'>
<term><function>builtins.isString</function>
<emphasis>e</emphasis></term>
2009-02-05 19:35:44 +00:00
<listitem><para>Return <literal>true</literal> if
<emphasis>e</emphasis> evaluates to a string, and
2009-02-05 19:35:44 +00:00
<literal>false</literal> otherwise.</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-isInt'>
<term><function>builtins.isInt</function>
<emphasis>e</emphasis></term>
2009-02-05 19:35:44 +00:00
<listitem><para>Return <literal>true</literal> if
<emphasis>e</emphasis> evaluates to an int, and
2009-02-05 19:35:44 +00:00
<literal>false</literal> otherwise.</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-isFloat'>
<term><function>builtins.isFloat</function>
<emphasis>e</emphasis></term>
<listitem><para>Return <literal>true</literal> if
<emphasis>e</emphasis> evaluates to a float, and
<literal>false</literal> otherwise.</para></listitem>
</varlistentry>
<varlistentry xml:id='builtin-isBool'>
<term><function>builtins.isBool</function>
<emphasis>e</emphasis></term>
2009-02-05 19:35:44 +00:00
<listitem><para>Return <literal>true</literal> if
<emphasis>e</emphasis> evaluates to a bool, and
2009-02-05 19:35:44 +00:00
<literal>false</literal> otherwise.</para></listitem>
</varlistentry>
<varlistentry><term><function>builtins.isPath</function>
<emphasis>e</emphasis></term>
<listitem><para>Return <literal>true</literal> if
<emphasis>e</emphasis> evaluates to a path, and
<literal>false</literal> otherwise.</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-isNull'>
<term><function>isNull</function>
<emphasis>e</emphasis></term>
<term><function>builtins.isNull</function>
<emphasis>e</emphasis></term>
<listitem><para>Return <literal>true</literal> if
<emphasis>e</emphasis> evaluates to <literal>null</literal>,
and <literal>false</literal> otherwise.</para>
<warning><para>This function is <emphasis>deprecated</emphasis>;
just write <literal>e == null</literal> instead.</para></warning>
2012-12-04 16:15:32 +00:00
</listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-length'>
<term><function>builtins.length</function>
<emphasis>e</emphasis></term>
2008-11-19 17:27:52 +00:00
<listitem><para>Return the length of the list
<emphasis>e</emphasis>.</para></listitem>
2008-11-19 17:27:52 +00:00
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-lessThan'>
<term><function>builtins.lessThan</function>
<emphasis>e1</emphasis> <emphasis>e2</emphasis></term>
2016-01-06 07:41:53 +00:00
<listitem><para>Return <literal>true</literal> if the number
<emphasis>e1</emphasis> is less than the number
<emphasis>e2</emphasis>, and <literal>false</literal>
otherwise. Evaluation aborts if either
<emphasis>e1</emphasis> or <emphasis>e2</emphasis>
2016-01-06 07:41:53 +00:00
does not evaluate to a number.</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-listToAttrs'>
<term><function>builtins.listToAttrs</function>
<emphasis>e</emphasis></term>
<listitem><para>Construct a set from a list specifying the names
and values of each attribute. Each element of the list should be
a set consisting of a string-valued attribute
<varname>name</varname> specifying the name of the attribute, and
an attribute <varname>value</varname> specifying its value.
Example:
<programlisting>
2011-12-30 17:39:03 +00:00
builtins.listToAttrs
[ { name = "foo"; value = 123; }
{ name = "bar"; value = 456; }
]
</programlisting>
evaluates to
<programlisting>
{ foo = 123; bar = 456; }
</programlisting>
</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-map'>
<term><function>map</function>
<emphasis>f</emphasis> <emphasis>list</emphasis></term>
<term><function>builtins.map</function>
<emphasis>f</emphasis> <emphasis>list</emphasis></term>
<listitem><para>Apply the function <emphasis>f</emphasis> to
each element in the list <emphasis>list</emphasis>. For
example,
<programlisting>
2011-12-30 17:39:03 +00:00
map (x: "foo" + x) [ "bar" "bla" "abc" ]</programlisting>
2011-12-30 17:39:03 +00:00
evaluates to <literal>[ "foobar" "foobla" "fooabc"
]</literal>.</para></listitem>
2012-12-04 16:15:32 +00:00
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-match'>
<term><function>builtins.match</function>
<emphasis>regex</emphasis> <emphasis>str</emphasis></term>
<listitem><para>Returns a list if the <link
xlink:href="http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html#tag_09_04">extended
POSIX regular expression</link> <emphasis>regex</emphasis>
matches <emphasis>str</emphasis> precisely, otherwise returns
<literal>null</literal>. Each item in the list is a regex group.
<programlisting>
builtins.match "ab" "abc"
</programlisting>
Evaluates to <literal>null</literal>.
<programlisting>
builtins.match "abc" "abc"
</programlisting>
Evaluates to <literal>[ ]</literal>.
<programlisting>
builtins.match "a(b)(c)" "abc"
</programlisting>
Evaluates to <literal>[ "b" "c" ]</literal>.
<programlisting>
builtins.match "[[:space:]]+([[:upper:]]+)[[:space:]]+" " FOO "
</programlisting>
Evaluates to <literal>[ "foo" ]</literal>.
</para></listitem>
</varlistentry>
<varlistentry xml:id='builtin-mul'>
<term><function>builtins.mul</function>
<emphasis>e1</emphasis> <emphasis>e2</emphasis></term>
2008-11-19 17:27:52 +00:00
2016-01-06 07:41:53 +00:00
<listitem><para>Return the product of the numbers
<emphasis>e1</emphasis> and
<emphasis>e2</emphasis>.</para></listitem>
2008-11-19 17:27:52 +00:00
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-parseDrvName'>
<term><function>builtins.parseDrvName</function>
<emphasis>s</emphasis></term>
2008-11-19 17:27:52 +00:00
<listitem><para>Split the string <emphasis>s</emphasis> into
2008-11-19 17:27:52 +00:00
a package name and version. The package name is everything up to
but not including the first dash followed by a digit, and the
version is everything following that dash. The result is returned
in a set <literal>{ name, version }</literal>. Thus,
2008-11-19 17:27:52 +00:00
<literal>builtins.parseDrvName "nix-0.12pre12876"</literal>
2011-12-30 17:39:03 +00:00
returns <literal>{ name = "nix"; version = "0.12pre12876";
}</literal>.</para></listitem>
2008-11-19 17:27:52 +00:00
</varlistentry>
<varlistentry xml:id='builtin-path'>
<term>
<function>builtins.path</function>
<emphasis>args</emphasis>
</term>
<listitem>
<para>
An enrichment of the built-in path type, based on the attributes
present in <emphasis>args</emphasis>. All are optional
except <varname>path</varname>:
</para>
<variablelist>
<varlistentry>
<term>path</term>
<listitem>
<para>The underlying path.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>name</term>
<listitem>
<para>
The name of the path when added to the store. This can
used to reference paths that have nix-illegal characters
in their names, like <literal>@</literal>.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>filter</term>
<listitem>
<para>
A function of the type expected by
<link linkend="builtin-filterSource">builtins.filterSource</link>,
with the same semantics.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>recursive</term>
<listitem>
<para>
When <literal>false</literal>, when
<varname>path</varname> is added to the store it is with a
flat hash, rather than a hash of the NAR serialization of
the file. Thus, <varname>path</varname> must refer to a
regular file, not a directory. This allows similar
behavior to <literal>fetchurl</literal>. Defaults to
<literal>true</literal>.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>sha256</term>
<listitem>
<para>
When provided, this is the expected hash of the file at
the path. Evaluation will fail if the hash is incorrect,
and providing a hash allows
<literal>builtins.path</literal> to be used even when the
<literal>pure-eval</literal> nix config option is on.
</para>
</listitem>
</varlistentry>
</variablelist>
</listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-pathExists'>
<term><function>builtins.pathExists</function>
<emphasis>path</emphasis></term>
<listitem><para>Return <literal>true</literal> if the path
<emphasis>path</emphasis> exists at evaluation time, and
<literal>false</literal> otherwise.</para></listitem>
</varlistentry>
2019-11-25 17:00:05 +00:00
<varlistentry xml:id='builtin-placeholder'>
<term><function>builtins.placeholder</function>
<emphasis>output</emphasis></term>
2019-11-25 17:00:05 +00:00
<listitem><para>Return a placeholder string for the specified
<emphasis>output</emphasis> that will be substituted by the
2019-11-25 17:00:05 +00:00
corresponding output path at build time. Typical outputs would be
<literal>"out"</literal>, <literal>"bin"</literal> or
<literal>"dev"</literal>.</para></listitem>
</varlistentry>
<varlistentry xml:id='builtin-readDir'>
<term><function>builtins.readDir</function>
<emphasis>path</emphasis></term>
2014-10-29 15:18:03 +00:00
<listitem><para>Return the contents of the directory
<emphasis>path</emphasis> as a set mapping directory entries
2014-10-29 15:18:03 +00:00
to the corresponding file type. For instance, if directory
<filename>A</filename> contains a regular file
<filename>B</filename> and another directory
<filename>C</filename>, then <literal>builtins.readDir
./A</literal> will return the set
<programlisting>
{ B = "regular"; C = "directory"; }</programlisting>
2014-10-29 15:18:03 +00:00
The possible values for the file type are
<literal>"regular"</literal>, <literal>"directory"</literal>,
<literal>"symlink"</literal> and
<literal>"unknown"</literal>.</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-readFile'>
<term><function>builtins.readFile</function>
<emphasis>path</emphasis></term>
<listitem><para>Return the contents of the file
<emphasis>path</emphasis> as a string.</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-removeAttrs'>
<term><function>removeAttrs</function>
<emphasis>set</emphasis> <emphasis>list</emphasis></term>
<term><function>builtins.removeAttrs</function>
<emphasis>set</emphasis> <emphasis>list</emphasis></term>
<listitem><para>Remove the attributes listed in
<emphasis>list</emphasis> from
<emphasis>set</emphasis>. The attributes dont have to
exist in <emphasis>set</emphasis>. For instance,
2014-10-29 15:18:03 +00:00
<programlisting>
removeAttrs { x = 1; y = 2; z = 3; } [ "a" "x" "z" ]</programlisting>
2011-12-30 17:39:03 +00:00
evaluates to <literal>{ y = 2; }</literal>.</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-replaceStrings'>
<term><function>builtins.replaceStrings</function>
<emphasis>from</emphasis> <emphasis>to</emphasis> <emphasis>s</emphasis></term>
<listitem><para>Given string <emphasis>s</emphasis>, replace
every occurrence of the strings in <emphasis>from</emphasis>
with the corresponding string in
<emphasis>to</emphasis>. For example,
<programlisting>
builtins.replaceStrings ["oo" "a"] ["a" "i"] "foobar"
</programlisting>
evaluates to <literal>"fabir"</literal>.</para></listitem>
</varlistentry>
<varlistentry xml:id='builtin-seq'>
<term><function>builtins.seq</function>
<emphasis>e1</emphasis> <emphasis>e2</emphasis></term>
2014-10-29 15:18:03 +00:00
<listitem><para>Evaluate <emphasis>e1</emphasis>, then
evaluate and return <emphasis>e2</emphasis>. This ensures
2014-10-29 15:18:03 +00:00
that a computation is strict in the value of
<emphasis>e1</emphasis>.</para></listitem>
2014-10-29 15:18:03 +00:00
</varlistentry>
<varlistentry xml:id='builtin-sort'>
<term><function>builtins.sort</function>
<emphasis>comparator</emphasis> <emphasis>list</emphasis></term>
2015-07-28 16:39:00 +00:00
<listitem><para>Return <emphasis>list</emphasis> in sorted
2015-07-28 16:39:00 +00:00
order. It repeatedly calls the function
<emphasis>comparator</emphasis> with two elements. The
2015-07-28 16:39:00 +00:00
comparator should return <literal>true</literal> if the first
element is less than the second, and <literal>false</literal>
otherwise. For example,
<programlisting>
builtins.sort builtins.lessThan [ 483 249 526 147 42 77 ]
</programlisting>
produces the list <literal>[ 42 77 147 249 483 526
]</literal>.</para>
<para>This is a stable sort: it preserves the relative order of
elements deemed equal by the comparator.</para></listitem>
</varlistentry>
<varlistentry xml:id='builtin-split'>
<term><function>builtins.split</function>
<emphasis>regex</emphasis> <emphasis>str</emphasis></term>
<listitem><para>Returns a list composed of non matched strings interleaved
with the lists of the <link
xlink:href="http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html#tag_09_04">extended
POSIX regular expression</link> <emphasis>regex</emphasis> matches
of <emphasis>str</emphasis>. Each item in the lists of matched
sequences is a regex group.
<programlisting>
builtins.split "(a)b" "abc"
</programlisting>
Evaluates to <literal>[ "" [ "a" ] "c" ]</literal>.
<programlisting>
builtins.split "([ac])" "abc"
</programlisting>
Evaluates to <literal>[ "" [ "a" ] "b" [ "c" ] "" ]</literal>.
<programlisting>
builtins.split "(a)|(c)" "abc"
</programlisting>
Evaluates to <literal>[ "" [ "a" null ] "b" [ null "c" ] "" ]</literal>.
<programlisting>
builtins.split "([[:upper:]]+)" " FOO "
</programlisting>
Evaluates to <literal>[ " " [ "FOO" ] " " ]</literal>.
</para></listitem>
</varlistentry>
<varlistentry xml:id='builtin-splitVersion'>
<term><function>builtins.splitVersion</function>
<emphasis>s</emphasis></term>
<listitem><para>Split a string representing a version into its
components, by the same version splitting logic underlying the
version comparison in <link linkend="ssec-version-comparisons">
<command>nix-env -u</command></link>.</para></listitem>
</varlistentry>
<varlistentry xml:id='builtin-stringLength'>
<term><function>builtins.stringLength</function>
<emphasis>e</emphasis></term>
<listitem><para>Return the length of the string
<emphasis>e</emphasis>. If <emphasis>e</emphasis> is
not a string, evaluation is aborted.</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-sub'>
<term><function>builtins.sub</function>
<emphasis>e1</emphasis> <emphasis>e2</emphasis></term>
2016-01-06 07:41:53 +00:00
<listitem><para>Return the difference between the numbers
<emphasis>e1</emphasis> and
<emphasis>e2</emphasis>.</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-substring'>
<term><function>builtins.substring</function>
<emphasis>start</emphasis> <emphasis>len</emphasis>
<emphasis>s</emphasis></term>
<listitem><para>Return the substring of
<emphasis>s</emphasis> from character position
<emphasis>start</emphasis> (zero-based) up to but not
including <emphasis>start + len</emphasis>. If
<emphasis>start</emphasis> is greater than the length of the
string, an empty string is returned, and if <emphasis>start +
len</emphasis> lies beyond the end of the string, only the
substring up to the end of the string is returned.
<emphasis>start</emphasis> must be
non-negative. For example,
<programlisting>
builtins.substring 0 3 "nixos"
</programlisting>
evaluates to <literal>"nix"</literal>.
</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-tail'>
<term><function>builtins.tail</function>
<emphasis>list</emphasis></term>
<listitem><para>Return the second to last elements of a list;
abort evaluation if the argument isnt a list or is an empty
list.</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-throw'>
<term><function>throw</function>
<emphasis>s</emphasis></term>
<term><function>builtins.throw</function>
<emphasis>s</emphasis></term>
<listitem><para>Throw an error message
<emphasis>s</emphasis>. This usually aborts Nix expression
evaluation, but in <command>nix-env -qa</command> and other
commands that try to evaluate a set of derivations to get
information about those derivations, a derivation that throws an
error is silently skipped (which is not the case for
<function>abort</function>).</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-toFile'>
<term><function>builtins.toFile</function>
<emphasis>name</emphasis>
<emphasis>s</emphasis></term>
<listitem><para>Store the string <emphasis>s</emphasis> in a
file in the Nix store and return its path. The file has suffix
<emphasis>name</emphasis>. This file can be used as an
input to derivations. One application is to write builders
“inline”. For instance, the following Nix expression combines
<xref linkend='ex-hello-nix' /> and <xref
linkend='ex-hello-builder' /> into one file:
<programlisting>
2011-12-30 17:39:03 +00:00
{ stdenv, fetchurl, perl }:
stdenv.mkDerivation {
name = "hello-2.1.1";
2012-12-04 16:15:32 +00:00
builder = builtins.toFile "builder.sh" "
source $stdenv/setup
PATH=$perl/bin:$PATH
tar xvfz $src
cd hello-*
./configure --prefix=$out
make
make install
";
src = fetchurl {
2020-05-21 17:29:13 +00:00
url = "http://ftp.nluug.nl/pub/gnu/hello/hello-2.1.1.tar.gz";
sha256 = "1md7jsfd8pa45z73bz1kszpp01yw6x5ljkjk2hx7wl800any6465";
};
inherit perl;
}</programlisting>
2012-12-04 16:15:32 +00:00
</para>
<para>It is even possible for one file to refer to another, e.g.,
<programlisting>
builder = let
configFile = builtins.toFile "foo.conf" "
# This is some dummy configuration file.
<emphasis>...</emphasis>
";
in builtins.toFile "builder.sh" "
source $stdenv/setup
<emphasis>...</emphasis>
cp ${configFile} $out/etc/foo.conf
";</programlisting>
Note that <literal>${configFile}</literal> is an antiquotation
(see <xref linkend='ssec-values' />), so the result of the
expression <literal>configFile</literal> (i.e., a path like
<filename>/nix/store/m7p7jfny445k...-foo.conf</filename>) will be
spliced into the resulting string.</para>
<para>It is however <emphasis>not</emphasis> allowed to have files
mutually referring to each other, like so:
<programlisting>
let
foo = builtins.toFile "foo" "...${bar}...";
bar = builtins.toFile "bar" "...${foo}...";
in foo</programlisting>
This is not allowed because it would cause a cyclic dependency in
the computation of the cryptographic hashes for
<varname>foo</varname> and <varname>bar</varname>.</para>
2018-08-31 13:32:59 +00:00
<para>It is also not possible to reference the result of a derivation.
If you are using Nixpkgs, the <literal>writeTextFile</literal> function is able to
do that.</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-toJSON'>
<term><function>builtins.toJSON</function> <emphasis>e</emphasis></term>
2013-11-18 23:03:11 +00:00
<listitem><para>Return a string containing a JSON representation
of <emphasis>e</emphasis>. Strings, integers, floats, booleans,
2013-11-18 23:03:11 +00:00
nulls and lists are mapped to their JSON equivalents. Sets
(except derivations) are represented as objects. Derivations are
translated to a JSON string containing the derivations output
path. Paths are copied to the store and represented as a JSON
string of the resulting store path.</para></listitem>
</varlistentry>
<varlistentry xml:id='builtin-toPath'>
<term><function>builtins.toPath</function> <emphasis>s</emphasis></term>
2018-11-08 12:03:50 +00:00
<listitem><para> DEPRECATED. Use <literal>/. + "/path"</literal>
to convert a string into an absolute path. For relative paths,
use <literal>./. + "/path"</literal>.
</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-toString'>
<term><function>toString</function> <emphasis>e</emphasis></term>
<term><function>builtins.toString</function> <emphasis>e</emphasis></term>
<listitem><para>Convert the expression
<emphasis>e</emphasis> to a string.
<emphasis>e</emphasis> can be:</para>
2017-02-19 18:54:18 +00:00
<itemizedlist>
2017-02-21 12:04:31 +00:00
<listitem><para>A string (in which case the string is returned unmodified).</para></listitem>
<listitem><para>A path (e.g., <literal>toString /foo/bar</literal> yields <literal>"/foo/bar"</literal>.</para></listitem>
<listitem><para>A set containing <literal>{ __toString = self: ...; }</literal>.</para></listitem>
<listitem><para>An integer.</para></listitem>
<listitem><para>A list, in which case the string representations of its elements are joined with spaces.</para></listitem>
2019-10-08 18:02:40 +00:00
<listitem><para>A Boolean (<literal>false</literal> yields <literal>""</literal>, <literal>true</literal> yields <literal>"1"</literal>).</para></listitem>
2017-02-21 12:04:31 +00:00
<listitem><para><literal>null</literal>, which yields the empty string.</para></listitem>
2017-02-19 18:54:18 +00:00
</itemizedlist>
</listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-toXML'>
<term><function>builtins.toXML</function> <emphasis>e</emphasis></term>
<listitem><para>Return a string containing an XML representation
of <emphasis>e</emphasis>. The main application for
<function>toXML</function> is to communicate information with the
builder in a more structured format than plain environment
variables.</para>
<!-- TODO: more formally describe the schema of the XML
representation -->
<para>Here is an example where this is
the case:
</para>
2012-12-04 16:15:32 +00:00
<programlisting><![CDATA[
2011-12-30 17:39:03 +00:00
{ stdenv, fetchurl, libxslt, jira, uberwiki }:
stdenv.mkDerivation (rec {
name = "web-server";
2011-12-30 17:39:03 +00:00
buildInputs = [ libxslt ];
2012-12-04 16:15:32 +00:00
builder = builtins.toFile "builder.sh" "
source $stdenv/setup
mkdir $out
echo "$servlets" | xsltproc ${stylesheet} - > $out/server-conf.xml]]> ① <![CDATA[
";
stylesheet = builtins.toFile "stylesheet.xsl"]]> ② <![CDATA[
"<?xml version='1.0' encoding='UTF-8'?>
<xsl:stylesheet xmlns:xsl='http://www.w3.org/1999/XSL/Transform' version='1.0'>
<xsl:template match='/'>
<Configure>
<xsl:for-each select='/expr/list/attrs'>
<Call name='addWebApplication'>
<Arg><xsl:value-of select=\"attr[@name = 'path']/string/@value\" /></Arg>
<Arg><xsl:value-of select=\"attr[@name = 'war']/path/@value\" /></Arg>
</Call>
</xsl:for-each>
</Configure>
</xsl:template>
</xsl:stylesheet>
";
servlets = builtins.toXML []]> ③ <![CDATA[
{ path = "/bugtracker"; war = jira + "/lib/atlassian-jira.war"; }
{ path = "/wiki"; war = uberwiki + "/uberwiki.war"; }
];
})]]></programlisting>
<para>The builder is supposed to generate the configuration file
for a <link xlink:href='http://jetty.mortbay.org/'>Jetty servlet
container</link>. A servlet container contains a number of
servlets (<filename>*.war</filename> files) each exported under a
specific URI prefix. So the servlet configuration is a list of
sets containing the <varname>path</varname> and
<varname>war</varname> of the servlet (<xref
linkend='ex-toxml-co-servlets' />). This kind of information is
difficult to communicate with the normal method of passing
information through an environment variable, which just
concatenates everything together into a string (which might just
work in this case, but wouldnt work if fields are optional or
contain lists themselves). Instead the Nix expression is
converted to an XML representation with
<function>toXML</function>, which is unambiguous and can easily be
processed with the appropriate tools. For instance, in the
example an XSLT stylesheet (at point ②) is applied to it (at point
①) to generate the XML configuration file for the Jetty server.
The XML representation produced at point ③ by
<function>toXML</function> is as follows:</para>
2012-12-04 16:15:32 +00:00
<programlisting><![CDATA[<?xml version='1.0' encoding='utf-8'?>
<expr>
<list>
<attrs>
<attr name="path">
<string value="/bugtracker" />
</attr>
<attr name="war">
<path value="/nix/store/d1jh9pasa7k2...-jira/lib/atlassian-jira.war" />
</attr>
</attrs>
<attrs>
<attr name="path">
<string value="/wiki" />
</attr>
<attr name="war">
<path value="/nix/store/y6423b1yi4sx...-uberwiki/uberwiki.war" />
</attr>
</attrs>
</list>
</expr>]]></programlisting>
<para>Note that <xref linkend='ex-toxml' /> uses the <function
linkend='builtin-toFile'>toFile</function> built-in to write the
builder and the stylesheet “inline” in the Nix expression. The
path of the stylesheet is spliced into the builder using the
syntax <literal>xsltproc ${stylesheet}</literal>.</para>
</listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-trace'>
<term><function>builtins.trace</function>
<emphasis>e1</emphasis> <emphasis>e2</emphasis></term>
<listitem><para>Evaluate <emphasis>e1</emphasis> and print its
abstract syntax representation on standard error. Then return
<emphasis>e2</emphasis>. This function is useful for
debugging.</para></listitem>
</varlistentry>
<varlistentry xml:id='builtin-tryEval'>
<term><function>builtins.tryEval</function>
<emphasis>e</emphasis></term>
2017-04-17 09:33:53 +00:00
<listitem><para>Try to shallowly evaluate <emphasis>e</emphasis>.
2017-04-17 09:33:53 +00:00
Return a set containing the attributes <literal>success</literal>
(<literal>true</literal> if <emphasis>e</emphasis> evaluated
2017-04-17 09:33:53 +00:00
successfully, <literal>false</literal> if an error was thrown) and
<literal>value</literal>, equalling <emphasis>e</emphasis>
if successful and <literal>false</literal> otherwise. Note that this
doesn't evaluate <emphasis>e</emphasis> deeply, so
<literal>let e = { x = throw ""; }; in (builtins.tryEval e).success
</literal> will be <literal>true</literal>. Using <literal>builtins.deepSeq
</literal> one can get the expected result: <literal>let e = { x = throw "";
}; in (builtins.tryEval (builtins.deepSeq e e)).success</literal> will be
<literal>false</literal>.
2017-04-17 09:33:53 +00:00
</para></listitem>
</varlistentry>
2012-12-04 16:15:32 +00:00
<varlistentry xml:id='builtin-typeOf'>
<term><function>builtins.typeOf</function>
<emphasis>e</emphasis></term>
2013-10-24 00:56:00 +00:00
<listitem><para>Return a string representing the type of the value
<emphasis>e</emphasis>, namely <literal>"int"</literal>,
2013-10-24 00:56:00 +00:00
<literal>"bool"</literal>, <literal>"string"</literal>,
<literal>"path"</literal>, <literal>"null"</literal>,
<literal>"set"</literal>, <literal>"list"</literal>,
<literal>"lambda"</literal> or
<literal>"float"</literal>.</para></listitem>
2013-10-24 00:56:00 +00:00
</varlistentry>
</variablelist>
</section>